TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Direct detection based φOTDR using the Kramers-Kronig receiver N2 - A Kramers-Kronig (KK) receiver is applied to a phase-sensitive optical time domain reflectometry based on direct detection. An imbalanced Mach-Zehnder interferometer with a 2× 2 coupler is used in sensing system to encode the phase information into optical intensity. The directly obtained signal is treated as the in-phase component, and the KK receiver provides the quadrature component by Hilbert transform of the obtained signal, so that the optical phase can be retrieved by IQ demodulation. The working principle is well explained, and the obtained phase variance is theoretically analyzed. The experiment demonstrates the functionality of the sensor and validates the theoretical analysis. KW - Kramers-Kronig detector KW - Distributed fiber sensing KW - Acoustic sensing PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516803 UR - https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-28-24-37058&id=442839 DO - https://doi.org/10.1364/OE.405723 VL - 28 IS - 24 SP - 37058 EP - 37068 PB - Optical Society of America AN - OPUS4-51680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Fiber optic distributed acoustic and vibration sensing for condition monitoring of infrastructure and hazard monitoring applications N2 - Fiber optic Distributed Acoustic Sensing (DAS) is an emerging method for many different monitoring purposes, enabling a spatially and temporally resolved collection of acoustic and vibration information over many kilometers. DAS, thus being a "dynamic" sensing technique, allows for online condition monitoring and the detection and localization of threats or hazards in real time via characteristic acoustic/vibration states and their changes or via occurring anomalous signals, respectively. At BAM, we have employed this technology for a number of different applications of monitoring of large infrastructures, e.g., bridges, pipelines, submarine power cables or railway tracks. Currently, we are investigating the use of DAS for further innovative uses, which aim at facilitating the energy transition, enabling "smart" infrastructure and providing the basis for comprehensive hazard monitoring and warning systems, respectively. Our research fields include fiber optic borehole monitoring in the context of hydrogen storage caverns, traffic and road monitoring, using DAS for earthquake monitoring in urban areas for disaster management and long-term monitoring of large-scale subsidence caused by mining activities. Another new topic is structural health monitoring in concrete structures in the framework of the FSP Security. In this talk, we will first briefly present the basics and capabilities of DAS. Then, we will portray our previous and current works related to this technology and show some attractive results. Finally, we will discuss our upcoming projects on exciting new applications of DAS. T2 - Abteilungsseminar 8. CY - Online meeting DA - 24.02.2021 KW - Distributed fiber optic sensing KW - Distributed acoustic sensing KW - DAS KW - Infrastructure monitoring KW - Hazard monitoring PY - 2021 AN - OPUS4-52160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Characterizing detection noise in phase-sensitive optical time domain reflectometry N2 - Phase-sensitive optical time domain reflectometry (φOTDR) is an excellent distributed fiber sensing technique and has been applied in various areas. Its noise is however never been comprehensively studied to the best of our knowledge. The different detection noise sources in such a sensing system are thoroughly investigated. The impacts of thermal noise, shot noise and the beat between signal and the amplified spontaneous emission from a pre-amplifier have been theoretically and experimentally demonstrated. Due to the random nature of the φOTDR signal, the detection noise demonstrates distinct features at different fiber positions in a single measurement. The theoretical analysis and the experimental result explicitly affirm most of the fiber sections, and the difference at some positions may be explained by ambient noise. KW - Noise analysis KW - Acoustic sensing KW - Distributed fiber sensing PY - 2021 DO - https://doi.org/https://doi.org/10.1364/OE.424410 SN - 1094-4087 VL - 29 IS - 12 SP - 18791 EP - 18806 PB - Optical Society of America CY - Washington, DC AN - OPUS4-52757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Hüllmann, Dino A1 - Winkler, Nicolas P. A1 - Schugardt, Jan ED - Rudnitskaya, A. T1 - Remote Drone-to-Drone Gas Sensing: A Feasibility Study N2 - Remote gas sensors mounted on mobile robots enable the mapping of gas distributions in large or poorly accessible areas. A challenging task however, is the generation of three-dimensional distribution maps from these spatially sparse gas measurements. To obtain high-quality reconstructions, the choice of optimal measuring poses is of great importance. Remote gas sensors, that are commonly used in Robot Assisted Gas Tomography (RAGT), require reflecting surfaces within the sensor’s range, limiting the possible sensing geometries, regardless of whether the robots are ground-based or airborne. By combining ground and aerial robots into a heterogeneous swarm whose agents are equipped with reflectors and remote gas sensors, remote inter-robot gas measurements become available, taking RAGT to the next dimension – releasing those constraints. In this paper, we demonstrate the feasibility of drone-to-drone measurements under realistic conditions and highlight the resulting opportunities. T2 - 19th International Symposium on Olfaction and Electronic Nose CY - Aveiro, Portugal DA - 29.05.2022 KW - Aerial robot KW - TDLAS KW - Inter-robot measurements KW - Gas tomography KW - Plume PY - 2022 SN - 978-1-6654-5860-3 DO - https://doi.org/10.1109/isoen54820.2022.9789627 SP - 1 EP - 3 PB - IEEE CY - USA AN - OPUS4-54926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Remote Drone-to-Drone Gas Sensing: A Feasibility Study N2 - Remote gas sensors mounted on mobile robots enable the mapping of gas distributions in large or poorly accessible areas. A challenging task however, is the generation of three-dimensional distribution maps from these spatially sparse gas measurements. To obtain high-quality reconstructions, the choice of optimal measuring poses is of great importance. Remote gas sensors, that are commonly used in Robot Assisted Gas Tomography (RAGT), require reflecting surfaces within the sensor’s range, limiting the possible sensing geometries, regardless of whether the robots are ground-based or airborne. By combining ground and aerial robots into a heterogeneous swarm whose agents are equipped with reflectors and remote gas sensors, remote inter-robot gas measurements become available, taking RAGT to the next dimension – releasing those constraints. In this paper, we demonstrate the feasibility of drone-to-drone measurements under realistic conditions and highlight the resulting opportunities. T2 - 19th International Symposium on Olfaction and Electronic Nose CY - Aveiro, Portugal DA - 29.05.2022 KW - Aerial robot KW - TDLAS KW - Inter-robot measurements KW - Gas tomography KW - Plume PY - 2022 AN - OPUS4-54927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Distributed fiber optic sensing @BAM N2 - Research and developement activities of BAM regarding Distributed Fiber Optic Sensing are portrayed using exemplary previous and current projects. Shown results pertain to distributed acoustic sensing (DAS), distributed temperagture sensing (DTS) and distributed strain sensing (DSS). T2 - Seismic seminar FU Berlin (group Prof. Shapiro) CY - Online meeting DA - 15.09.2022 KW - Distributed fiber optic sensing KW - Distributed acoustic sensing KW - Distributed temperature sensing KW - Distributed strain sensing KW - Infrastructure monitoring PY - 2022 AN - OPUS4-55721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU project ODYSSEUS - Improving Knowledge on HMEs N2 - The ODYSSEUS project aims at improving knowledge about explosives precursers/HMEs and at developing and improving prognostic and detection tool to counter and prevent terrorist attacks. The contribution presents an overview of the ODYSSEUS approaches in countering and preventing terrorist attacks. The lecture will also show what knowledge has been gained to date about HMEs and new precursers and what consequences result from this. T2 - EXERTER Final Conference CY - Soest, Netherlands DA - 24.04.2023 KW - HME KW - Preparation of HME KW - Misuse of explosives KW - EU project ODYSSEUS PY - 2023 AN - OPUS4-57387 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano, Daniel A1 - Bulling, Jannis A1 - Gravenkamp, Hauke A1 - Prager, Jens A1 - Birk, Carolin T1 - The SBFEM to simulate the scattering of ultrasonic guided waves interacting with defects in plate structures N2 - In the field of guided waves for non-destructive testing, the interaction of these waves with damages or other discontinuities in a structure is critical. When a guided wave mode travels and hits a defect, it scatters in all directions, converting to other modes and reflecting the existing one. These interactions are captured in scattered far field complex amplitudes. The amplitudes are stored in scattering matrices, which characterise the elastodynamic behaviour of a defect completely. Scattering matrices are also useful to simulate backpropagation from a defect using ray-tracing methods. Simulating these interactions is challenging, and analytical solutions only exist for simple geometries. Still, using general tools like the finite element method results in large, usually costly models. Recently, researchers proposed a method based on a numerical implementation of the Kirchhoff–Helmholtz integral that allows the computation of the scattering matrices using a model containing only the damaged region. However, classical methods to resolve the far field and low-order elements were used, leading to large models yet more efficient than using other techniques. We propose using the SBFEM as an alternative to enhance the computation of the far field scattering. The damaged region is discretised using high-order polyhedral elements, while the far field is constructed using a modified version of the SBFEM. Examples compared to the literature demonstrate the validity of the approach. T2 - Doktorandentreffen CY - Attendorn, Germany DA - 16.10.2023 KW - SBFEM KW - Guided Waves KW - Scattering PY - 2023 AN - OPUS4-59775 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano, Daniel A1 - Bulling, Jannis A1 - Prager, Jens T1 - Modeling guided waves interacting with arbitrarily shaped inhomogeneities using SBFEM in combination with an extruded quadtree decomposition for 3D plates N2 - For structural health monitoring systems or non-destructive testing, it is crucial to study the interactions of ultrasonic-guided waves with inhomogeneities or damage in structural components. Simulation of these interactions poses a challenge. After the wave-damage interaction, the numerical model must reproduce features like mode conversion or wave scattering. Mathematically, damages are discontinuities in a computational domain, and each wave interacts differently because of the geometrical features. We propose a quadtree-based meshing in the current contribution to capture these geometrical characteristics. This kind of discretisation approach requires special techniques to couple cells of different sizes since, after a quadtree decomposition, the problem of so-called hanging nodes may arise. Transition elements based on high-order transfinite shape functions are used to solve this issue. The advantage is that these elements allow the correct coupling of the cells while retaining a high-order interpolation. Moreover, the reuse of the dynamic stiffness matrices can be exploited based on the similarity of the cells. This procedure makes the approach very efficient. Examples show the scattering characteristics of different guided wave modes after interacting with inhomogeneities and discontinuities in a plate. T2 - DAGA 2023 CY - Hamburg, Germany DA - 06.03.2023 KW - SBFEM KW - Quadtree KW - Ultrasound PY - 2023 SP - 1035 EP - 1038 CY - Hamburg AN - OPUS4-59776 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Experimental Setup for the Reproducible Generation of Pressure Waves in Free Field Conditions N2 - The injuries caused by the primary blast are still poorly understood, especially in the torso region. To generate sufficiently large data sets, shock tubes are often used. However, these have some limitations, such as blockage, use of the exit jet, widening cross-sections, and scaling problems with respect to compressive strength and test objects. Therefore, it is appropriate to conduct experiments under free-field conditions, but tests with real explosives are often associated with long preparation and setup times as well as high safety requirements. Therefore, this paper presents an experimental setup for the reproducible generation of blast waves under free-field conditions. This experimental setup aims to provide a test environment for a sufficiently large specimen to investigate the behaviour of the shock wave within the specimen, especially at the media interfaces. As an example of application, the influence of the primary explosive effect on protective equipment or on tissue simulants for the investigation of blast injuries can be mentioned. An autoclave is used as a shock wave generator. It has a volume of 0.065 m3 and is filled with a stoichiometric acetylene-oxygen gas mixture. The setup and turnaround time is approximately 30 minutes. The following factors have been selected as target variables for the optimization of the shock wave generator: reproducibility of the pressure wave, use-case-relevant positive phase duration and peak overpressure, a pressure curve characteristic corresponding to that of a military explosive under undisturbed free field conditions, and short setup times of the experimental setup. For this purpose, the experimental setup is presented in this paper. Several series of measurements are presented, showing the characteristics of the generated pressure wave. For the generated pressure wave, the classical pressure curve characteristics can be clearly recognized. A peak pressure of 92 kPa is reached at a distance of 1 m from the opening, and the first positive pressure phase lasts 1.17 ms. Furthermore, the pressure wave propagates in a hemispherical shape. The typical characteristics of the blast wave generated by the SWG have been demonstrated using the military explosive PETN. It is shown that the actual load case corresponds to about 70 g of PETN. T2 - 26th International Symposium on Military Aspects of Blast and Shock CY - Wollongong, Australia DA - 03.12.2023 KW - Shock wave generator KW - Blast injury KW - Pressure wave KW - Experimental setup PY - 2023 AN - OPUS4-59356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik ED - Krentel, Daniel ED - Grasse, Dennis ED - Gerbeit, Marco ED - Grobert, Steffen ED - Hauer, Thorsten T1 - Experimental Setup for the Reproducible Generation of Pressure Waves in Free Field Conditions N2 - The injuries caused by the primary blast are still poorly understood, especially in the torso region. To generate sufficiently large data sets, shock tubes are often used. However, these have some limitations, such as blockage, use of the exit jet, widening cross-sections, and scaling problems with respect to compressive strength and test objects. Therefore, it is appropriate to conduct experiments under free-field conditions, but tests with real explosives are often associated with long preparation and setup times as well as high safety requirements. Therefore, this paper presents an experimental setup for the reproducible generation of blast waves under free-field conditions. This experimental setup aims to provide a test environment for a sufficiently large specimen to investigate the behaviour of the shock wave within the specimen, especially at the media interfaces. As an example of application, the influence of the primary explosive effect on protective equipment or on tissue simulants for the investigation of blast injuries can be mentioned. An autoclave is used as a shock wave generator. It has a volume of 0.065 m3 and is filled with a stoichiometric acetylene-oxygen gas mixture. The setup and turnaround time is approximately 30 minutes. The following factors have been selected as target variables for the optimization of the shock wave generator: reproducibility of the pressure wave, use-case-relevant positive phase duration and peak overpressure, a pressure curve characteristic corresponding to that of a military explosive under undisturbed free field conditions, and short setup times of the experimental setup. For this purpose, the experimental setup is presented in this paper. Several series of measurements are presented, showing the characteristics of the generated pressure wave. For the generated pressure wave, the classical pressure curve characteristics can be clearly recognized. A peak pressure of 92 kPa is reached at a distance of 1 m from the opening, and the first positive pressure phase lasts 1.17 ms. Furthermore, the pressure wave propagates in a hemispherical shape. The typical characteristics of the blast wave generated by the SWG have been demonstrated using the military explosive PETN. It is shown that the actual load case corresponds to about 70 g of PETN. T2 - 26th International Symposium on Military Aspects of Blast and Shock CY - Wolongong, Australia DA - 03.12.2023 KW - Shock wave generator KW - Blast injury KW - Pressure wave KW - Experimental setup PY - 2023 SP - 1 EP - 13 AN - OPUS4-59357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gottinger, A. A1 - Ladu, Luana A1 - Blind, K. T1 - Standardization in the context of science and regulation: An analysis of the Bioeconomy N2 - Standards play a crucial role in the transition to more sustainable production and consumption models by promoting the development of new markets for innovative products. In the case of the bioeconomy, standards are particularly relevant to ensure the sustainability of products and processes. Hence, standards represent an essential strategic tool to foster sustainable development. Furthermore, the standard-setting process brings together different stakeholders, which encourages research and the transfer of knowledge to industrial practice. In particular, scientific publications assist the standardisation process by providing scientific evidence. This study investigates the role of science and regulation in the bioeconomy standardisation process. It first provides a general analysis of bioeconomy-related standards, followed by an analysis of the regulations and publications referenced in the standards. Our analysis discloses a strong use of scientific knowledge in the bioeconomy standardisation process and demonstrates the readiness to integrate novel academic findings into revised versions of the standards. In addition, it reveals that the interaction between science and regulation is an important driver for standardisation activities around the bioeconomy, needed to support sustainable transitions. KW - Bioeconomy KW - Standardisation KW - Knowledge Use KW - Socio-technical Transition PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599899 DO - https://doi.org/10.1016/j.envsci.2023.06.013 VL - 147 SP - 188 EP - 200 PB - Elsevier AN - OPUS4-59989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU Projekt ODYSSEUS – Year 2 Update N2 - Es werden das EU-finanzierte FE-Projekt ODYSSEUS, ausgewählte Ergebnisse zum Thema Home-made-explsosives (HMEs) und precursers, aktuelle Fragestellungen und ein Ausblick vorgestellt. T2 - 23. Internationales Symposium des Bundeskriminalamtes für Sprengstoffermittelnde und Entschärfende unkonventioneller Spreng- und Brandvorrichtungen CY - Magdeburg, Germany DA - 27.11.2023 KW - Home-made-explosives (HME) KW - Precurser PY - 2023 AN - OPUS4-58975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ritz, Sebastian A1 - Loewe, Anna A1 - Bauer, Jan T1 - Specialties of HAZID-Study for Large Unmanned Underwater Vehicles N2 - This paper scopes the specialties of a hazard identification study for large and extra-large unmanned undersea vehicles (UUVs). A generic node/function structure is derived from different large and extra-large UUV designs, partially own vehicle designs from research projects, and partially from commercial vehicles. For each node, a short overview of its components and the proper function or operations is defined. A set of guide words is used to prompt a hazard discussion for each node, which identifies unwanted functions, resulting in potential hazards and unmitigated consequences. Related to the SafeMASS-Report from DNV, this work concentrates on selected topics of the bridge-related function on voyage, control & monitoring, and abnormal situations. For unmanned vehicles without any person on board, these three topics become more important for underwater vehicles with very limited connectivity or temporary disruptions of communication whereby an operator in a remote-control center could only be provided with rough vehicle or mission states. Therefore, vehicle control, whether in hard- or software, must handle most tasks belonging to the considered functions automatically or autonomously. Hence, the most appropriate reactions of the system to unwanted system behavior must be implemented. This HAZID study could, on the one hand, be used as background for such an implementation, and on the other hand, it is used to verify the implemented actions on the risks and hazards. T2 - OCEANS 2023 - Limerick CY - Limerick, Ireland DA - 05.06.2023 KW - Autonomous underwater vehicles KW - HAZID KW - Risk-based design KW - Safety KW - Cyber security PY - 2023 DO - https://doi.org/10.1109/OCEANSLimerick52467.2023.10244358 SP - 1 EP - 10 PB - IEEE AN - OPUS4-59099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Seminar on Smelling Drones – Part 3: Deep Dive: Bout-based Gas Source Localization using Aerial Robot Swarms N2 - This seminar series comprises three lectures on drones and ground robots capable of sensing chemical substances and two accompanying hands-on workshops on nano drones equipped with chemical sensors. In the first lecture, Dr. Neumann will talk on a summary of aerial robot olfaction and his research. In the second and third lectures, more details of the nano drones equipped with chemical sensors will be provided, and the participants can get hands on experience of the nano drones in the accompanying workshops. The lectures will be given in English. This seminar series is supported by FY2023 Researcher Exchanges Program in UEC. T2 - Seminar Series on Smelling Drones CY - Tokyo, Japan DA - 28.11.2023 KW - Mobile robotic olfaction KW - Nano aerial robot KW - Gas source localization KW - Bouts KW - Distributed robotics KW - Swarm PY - 2023 AN - OPUS4-59131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Häusler, F. T1 - Bout-based Gas Source Localization using Aerial Robot Swarms N2 - Gas source localization (GSL) helps mitigate the impact of industrial accidents and natural disasters. While GSL may be dangerous and time-consuming when performed by humans, swarms of agile and inexpensive nano aerial robots may increase the safety and efficiency of gas source localizations. Since the small payloads of nano aerial robots limit the sensing and computing resources, strategies adapted from biological swarms, such as colonies of social insects, are used to coordinate robot swarms. Most swarm GSL strategies are based on the assumption that the maxima of gas concentrations are sufficiently close to the gas sources. However, prior studies have indicated that the occurrence of “bouts”, a metric for the intermittency of gas distributions, may advantageously be used as a more accurate gas source proximity indicator. This paper presents a swarm GSL strategy employing bouts as source proximity indicators and a bio-inspired pheromone system for communication. Nano aerial robots, deployed in this study, act as agents and emit pheromone markers in an artificial environment upon detecting bouts. Leveraging the concept of artificial potential fields, the agents switch between exploiting the knowledge of the swarm by following pheromone gradients and exploring the search space by targeting a random point. The agents are repelled by each other and by walls to avoid collisions. The swarm GSL strategy is implemented into three nano aerial robots and validated in a real-world experiment in an indoor environment with a single gas source. The results indicate that the the swarm GSL strategy presented in this paper is capable of GSL in indoor environments and that the intermittency of gas distributions is a better source proximity indicator than the mean concentration. T2 - IEEE Sensors 2023 CY - Vienna, Austria DA - 29.10.2023 KW - Mobile robotic olfaction KW - Nano aerial robot KW - Gas source localization KW - Bouts KW - Distributed robotics PY - 2023 AN - OPUS4-58779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU project ODYSSEUS N2 - Fortschrittsbericht über das EU-Projekt ODYSSEUS (BAM VH 2550). T2 - International technical exchange at BKA CY - Wiesbaden, Germany DA - 08.11.2023 KW - Homemade explosives KW - HME KW - Precurser PY - 2023 AN - OPUS4-58801 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häusler, F. A1 - Stührenberg, J. A1 - Smarsly, K. A1 - Neumann, Patrick P. T1 - Bout-based Gas Source Localization using Aerial Robot Swarms N2 - Gas source localization (GSL) helps mitigate the impact of industrial accidents and natural disasters. While GSL may be dangerous and time-consuming when performed by humans, swarms of agile and inexpensive nano aerial robots may increase the safety and efficiency of gas source localizations. Since the small payloads of nano aerial robots limit the sensing and computing resources, strategies adapted from biological swarms, such as colonies of social insects, are used to coordinate robot swarms. Most swarm GSL strategies are based on the assumption that the maxima of gas concentrations are sufficiently close to the gas sources. However, prior studies have indicated that the occurrence of “bouts”, a metric for the intermittency of gas distributions, may advantageously be used as a more accurate gas source proximity indicator. This paper presents a swarm GSL strategy employing bouts as source proximity indicators and a bio-inspired pheromone system for communication. Nano aerial robots, deployed in this study, act as agents and emit pheromone markers in an artificial environment upon detecting bouts. Leveraging the concept of artificial potential fields, the agents switch between exploiting the knowledge of the swarm by following pheromone gradients and exploring the search space by targeting a random point. The agents are repelled by each other and by walls to avoid collisions. The swarm GSL strategy is implemented into three nano aerial robots and validated in a real-world experiment in an indoor environment with a single gas source. The results indicate that the the swarm GSL strategy presented in this paper is capable of GSL in indoor environments and that the intermittency of gas distributions is a better source proximity indicator than the mean concentration. T2 - IEEE Sensors 2023 CY - Vienna, Austria DA - 29.10.2023 KW - Mobile robotic olfaction KW - Nano aerial robot KW - Gas source localization KW - Bouts KW - Distributed robotics PY - 2023 SN - 979-8-3503-0387-2 DO - https://doi.org/10.1109/sensors56945.2023.10325109 SP - 1 EP - 4 PB - IEEE AN - OPUS4-58778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Influence of Torso Protective Equipment on Intracorporeal Shock Wave Behavior N2 - In the field of explosive reactions, there is a type of explosive effect that lacks a sufficient database and reproducible experiments regarding biomechanics. It concerns the primary explosive effect. It is defined as pure shock wave of the explosion. The physical behavior of the shock wave when interacting with different types of tissue and, in particular, the subsequent transitions of the shock wave, have barely been investigated. The transition of the shock wave into other materials is the focus of the research Therefore, the aim of the investigations is the development of a multidisciplinary method to investigate shock wave behavior in various generic tissue simulants under the most reproducible conditions possible with realistic loads in an experimental test series with short set-up times. An autoclave is used to generate the pressure waves. A simplified torso model consisting of ballistic gelatin is used as a simulant. In this paper, the influence of protective equipment on the pressure load in the tissue simulant is investigated. For this purpose, consecutive test setups are used. First, the behavior of ballistic gelatin as a tissue simulant is investigated. Then, the simplified torso model is covered with typical combat clothing consisting of four layers. Afterwards a currently used UHMWPE ballistic protective plate is placed in front of the simplified torso model. Finally, the combat clothing and the protective plate are examined in combination. Three cast-in pressure sensors are used as measuring devices, as well as an acceleration sensor attached to the protective plate. The experiments show that the maximum overpressure in a model protected by combat clothing and the protective plate can be reduced by 95%. However, the propagation speed of the shock wave within the simplified torso model increases from 1535.5 m/s to 2204.5 m/s. This shows that even protective equipment, which is not primarily intended to protect against blast, offers a significant reduction in the pressure load in the protected area. On the one hand it is caused by the media transition from air to PE and the resulting higher reflection of the acceleration of the transmitted wave within the simulant. On the other hand, it is also reduced due to the damping and dispersion caused by the clothing layers. T2 - 16th International Personal Armour Systems Symposium CY - Dresden, Germany DA - 11.09.2023 KW - Shock wave generator KW - Blast injury KW - Pressure wave KW - Experimental setup PY - 2023 AN - OPUS4-58639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik A1 - Grobert, Steffen A1 - Krentel, Daniel A1 - Hauer, Thorsten T1 - Influence of torso protective equipment on intracorporeal shock wave behavior N2 - In the field of explosive reactions, there is a type of explosive effect that lacks a sufficient database and reproducible experiments regarding biomechanics. It concerns the primary explosive effect. It is defined as pure shock wave of the explosion. The physical behavior of the shock wave when interacting with different types of tissue and, in particular, the subsequent transitions of the shock wave, have barely been investigated. The transition of the shock wave into other materials is the focus of the research Therefore, the aim of the investigations is the development of a multidisciplinary method to investigate shock wave behavior in various generic tissue simulants under the most reproducible conditions possible with realistic loads in an experimental test series with short set-up times. An autoclave is used to generate the pressure waves. A simplified torso model consisting of ballistic gelatin is used as a simulant. In this paper, the influence of protective equipment on the pressure load in the tissue simulant is investigated. For this purpose, consecutive test setups are used. First, the behavior of ballistic gelatin as a tissue simulant is investigated. Then, the simplified torso model is covered with typical combat clothing consisting of four layers. Afterwards a currently used UHMWPE ballistic protective plate is placed in front of the simplified torso model. Finally, the combat clothing and the protective plate are examined in combination. Three cast-in pressure sensors are used as measuring devices, as well as an acceleration sensor attached to the protective plate. The experiments show that the maximum overpressure in a model rotected by combat clothing and the protective plate can be reduced by 95%. However, the propagation speed of the shock wave within the simplified torso model increases from 1535.5 m/s to 2204.5 m/s. This shows that even protective equipment, which is not primarily intended to protect against blast, offers a significant reduction in the pressure load in the protected area. On the one hand it is caused by the media transition from air to PE and the resulting higher reflection of the acceleration of the transmitted wave within the simulant. On the other hand, it is also reduced due to the damping and dispersion caused by the clothing layers. T2 - 16th International Personal Armour Systems Symposium CY - Dresden, Germany DA - 11.09.2023 KW - Shock wave generator KW - Blast injury KW - Pressure wave KW - Experimental setup PY - 2023 SN - 978-9-0829-2732-0 SP - 178 EP - 187 CY - Brüssel AN - OPUS4-58640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Using DAS for monitoring of infrastructures and for seismic sensing applications N2 - After describing the basics of distributed fiber optic sensing in general and distributed fiber optic acoustic sensing (DAS) in particular, several currently and previously investigated fields of application of DASin infrastructure monitoring and seismic monitoring are presented. A focus is placed on seismic measurements and DAS measurements determining the dynamic responses of concrete structures to certain stimuli. T2 - Meeting of the WAVE Initiative Hamburg CY - Online meeting DA - 09.02.2023 KW - Distributed acoustic sensing KW - DAS KW - Dynamic structural response KW - Seismic measurements KW - Bridge monitoring KW - Traffic monitoring PY - 2023 AN - OPUS4-57007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerbeit, Marco T1 - Test set-up for reproducible shock wave generation N2 - In industrial applications, the effects of explosions must be considered as important part of safety assessments. This is particularly crucial in applications involving explosives or pressurized containers. The evaluation of the effects of shock waves on the environment becomes essential in such scenarios and requires comprehensive experimental test series. This article therefore presents a test bench that can generate and record reproducible, adjustable shock waves with short set-up times. The presented data proves the quality and validity of this set-up to generate case relevant data, like overpressure in comparison to explosives and shock tubes, with load cases of high relevance. The presented free-field tests are carried out at BAM's Test Site Technical Safety (TTS) with a gas-operated shock wave generator. This shock wave generator consists of a pressure vessel (autoclave) that is operated with a detonable gas mixture or compressed air. The pressure is released through an orifice by the instantaneous bursting of a diaphragm. The aim is to develop further the novel test bench that generates shock waves on models in a generic scenario and offers several advantages to create a valid database for the effects of shock waves. In contrast to classic shock tubes, this test bench offers the advantage of realistic hemispherical shock wave propagation and scalability, both for the investigated model size and for the generation of load cases, so that different model variables can be investigated under different boundary conditions (mainly overpressure); at the same time, typical interference of a shock tube experiment due to reflections, blockage effects and the following fluid flow can be minimized. These negative influences are not realistic compared to the ideal event of a detonation. T2 - 15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Shock KW - Blast KW - Autoclave KW - Explosions KW - Overpressure PY - 2024 AN - OPUS4-60982 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Drop test simulation of packaging for dangerous goods: Investigation of appropriate drop height adjustment N2 - In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision which is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, e.g., plastic deformation. In this work, a test stand is developed for measuring the change in kinetic energy of different packaging designs and filling substances in regulative drop tests. The experimental results are used to validate finite-element (FE) models so that packaging properties can be varied in simulated drop test scenarios. The findings intend to describe the appropriate drop height adjustment of the respective packaging with same design but deviating gross mass to produce comparable mechanical response. The results are highly beneficial for testing laboratories, approval issuing authorities and packaging institutes confronted with the problem of testing packages with gross masses other than those to be approved. T2 - 24th IAPRI World Conference CY - Valencia, Spain DA - 17.06.2024 KW - Dangerous goods packagings KW - FEM KW - Drop test KW - Mechanical response PY - 2024 AN - OPUS4-60607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Fibre Optic Sensing @BAM N2 - The profile of division 8.6 Fibre Optic Sensors is shown, underlining specific competencies and know-how. Furthermore, several current application examples of the use of distributed fiber optic sensing for condition and state monitoring are presented. T2 - Visit and technical tour of OECD/NEA CODAP working group led by Gesellschaft für Anlagen- und Reaktorsicherheit CY - Berlin, Germany DA - 19.09.2024 KW - Distributed fiber optic sensing KW - Condition monitoring KW - Geomonitoring KW - Structural health monitoring KW - Embedded fiber optic sensor PY - 2024 AN - OPUS4-61080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Fibre Optic Sensors (Division 8.6) N2 - Fiber optic sensing technology being researched and developed at BAM and its numerous applications/ use cases is presented briefly after a short introductory part on the fundamentals of (distributed) fiber optic sensing. T2 - BAM - RCNDE (UK) Webinar CY - Online meeting DA - 13.11.2024 KW - Distributed fiber optic sensing KW - Structural health monitoring KW - Condition monitoring KW - DAS KW - Embedded fiber optic sensors PY - 2024 AN - OPUS4-61643 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick‐Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, Manfred W. T1 - Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass N2 - In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision that is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, for example, plastic deformation. In this work, a test stand KW - Corrugated fibreboard box KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Mechanical response KW - Structural dynamics PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614138 DO - https://doi.org/10.1002/pts.2858 SP - 1 EP - 18 PB - Wiley AN - OPUS4-61413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the working principle of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Underground gas storage KW - Distributed fiber sensing KW - Geothermal borehole KW - Ground movement KW - Leakage detection KW - Structure health monitoring PY - 2024 AN - OPUS4-60146 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the workingbnprinciple of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Structure health monitoring KW - Geothermal borehole KW - Distributed fiber optic sensing KW - Ground movement KW - Leakage detection PY - 2024 DO - https://doi.org/10.1117/12.3023571 SN - 0277-786X VL - 13001 SP - 1 EP - 10 PB - SPIE AN - OPUS4-60384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Investigation of intracorporeal shock wave propagation using a simplified torso model and a shock wave generator –a progress report N2 - Following directly from the information presented at IFBIC 2023 on the research project 'Investigation of intracorporeal shock wave propagation using a simplified torso model and a shock wave generator', the latest results are presented below [1]. In order to contribute to the research efforts on the primary explosion effects, the aim of the investigation is the development of a multidisciplinary method to investigate shock wave behavior in various generic tissue simulants under the most reproducible conditions possible with realistic loads in an experimental series with short set-up times. To achieve this, an autoclave with a volume of 0.065 m3 is used to generate reproducible pressure waves (Fig. 1). The autoclave will be referred to as Shockwave Generator (SWG). The pressure wave is produced by the detonation of a stoichiometric mixture of acetylene and oxygen under atmospheric conditions. The SWG-outlet is sealed by a rupture disc, which can be adjusted in thickness to vary the initial pressure. Additionally, modifying the composition of the acetylene-oxygen mixture can result in different load cases. The SWG requires approximately 30 minutes of set-up time between trials. The SWG was adjusted to match the characteristics of a real and typical explosive through free-field measurements. The experiments demonstrated that the pressure wave propagates in a hemispherical shape and has sufficient reproducibility. To represent soft tissue, a basic model made of homogeneous ballistic gelatin is used in a geometrically simplified torso model (STM) (Fig. 2). The STM was enlarged to outer dimensions of 400 x 250 x 240 mm. Viscoelastic behavior of the ballistic gelatin can be assumed due to the collagen structure [2]. The density of the ballistic gelatin, and therefore the sound velocity, can be adjusted by changing the mixing ratio. Simplified simulants, such as hollow and solid material (bone simulant), were embedded in the STM. Additionally, the STM has been tested as a carrier material for biological substances, such as indicator species. The next step is to test the STM as a carrier material for larger organic tissue structures such as lungs or kidneys. The organic tissue samples will undergo histological examination to analyze their structural changes afterwards. The STM is equipped with embedded piezoelectric pressure sensors, an accelerometer and a temperature sensor. Visual documentation is captured using a high-speed camera. This measurement setup allows for the tracking of the coupled pressure wave and its behavior within the model and at the media transitions. Pressure values can be recorded after certain media changes, such as from soft tissue to a solid material (Figure 3). The following is a review of the optimizations made to the entire experimental setup. The reproducibility of the SWG was increased. This was achieved by extending the evacuation process to the entire feed system of the SWG. Nitrogen residues in the SWG system can thus be avoided. As a result, the double peaks that occur at the first maximum can be avoided, as combustion runs more evenly without the nitrogen residues. In addition, partially varying peak overpressures can be avoided, as the acytelene-oxygen mixture is not too lean due to the elimination of the nitrogen residues. The workflow has been streamlined, resulting in an average set-up time of 25 minutes for the SWG. In the case of the STM, the manufacturing process in particular was optimized by examining and defining the manufacturing process based on scientific publications, which increases the reproducibility of the STM base bodies. As already mentioned in the previous paragraph, the STM was equipped with various additives in order to investigate the transition behavior of the pressure wave. The following trail serves as an example: A comparison is made between the STM in the basic structure (Fig. 2 l.s.) and with an embedded solid material (bone plate) (Fig. 3 l.s.). An external overpressure of 100 kPa is generated by the SWG at a distance of 1 m, where the STM is placed. For the basic STM structure, the sensor distance is consistently 100 mm. The internal overpressure is visible in Fig. 2 r.s.. A typical ideal pressure curve can be seen. The characteristic points are easily distinguishable from the reflection peaks. In the STM with an embedded solid material, the sensor distance remains consistently at 66.6 mm T2 - 8th International Forum on Blast Injury Countermeasures CY - Washington D.C., USA DA - 01.05.2024 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Experimental setup PY - 2024 AN - OPUS4-60044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ladu, Luana T1 - Empowering Quality Infrastructure through Digital Transformation N2 - The event, co-organized by the German Federal Institute for Materials Research and Testing (BAM) and the United Nations Industrial Development Organization (UNIDO), brought together over 150 participants worldwide to explore how digitalization can enhance Quality Infrastructure (QI). Featuring insights into global trends, key findings from international studies, and inspiring best practices from Asia, Africa, Europe, and Latin America the webinar concluded a panel discussion with relevant experts in the field on Unlocking Opportunities through Digital Transformation in Quality Infrastructure. T2 - Webinar "Empowering Quality Infrastructure through Digital Transformation", co-organized by BAM and UNIDO CY - Online meeting DA - 11.12.2024 KW - Digital Transformation KW - Quality Infrastructure KW - Conformity Assessment PY - 2024 AN - OPUS4-62353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liao, Chun-Man ED - Zhang, Jian T1 - Modal and Wave Propagation Analysis of Vibration Tests on a Laboratory Building Model Before and After Damage N2 - Weakened structural stiffness is often a consequence of building damage, particularly after severe events such as earthquakes, where compromised structural performance can pose significant risks. To prevent immediate structural failure, an early warning system is essential, which requires inspection of local components. This research aims to achieve that by exploring the wave propagation analysis method, specifically seismic interferometry. Previous studies have applied this method to building structures, treating them as homogeneous layers of grouped floors. By analyzing the wave travel time along the height of these layers, the fundamental period of the building was estimated. However, this approach did not account for local damage or the variability of structural components, similar to the limitations of vibration‐based damage detection methods, which mainly identify global changes. Thus, the goal of this paper is to improve structural health monitoring by examining the sensitivity of wave screening, bridging the gap between nondestructive testing and vibration‐based damage detection. A half‐scale, seven‐story building model, characterized by vertical stiffness irregularity and transverse plan asymmetry, was tested in a laboratory setting. Two vertical sensor arrays were placed near corner columns of different sizes, representing both strong and weak structural areas. These arrays recorded floor accelerations in three directions. The study confirmed the effectiveness of wave propagation analysis for detecting damage along the sensor arrays before and after the earthquake. A transmissibility damage indicator was used to correlate changes in wave velocity, providing a quantitative assessment of damage levels along the wave propagation path. KW - Damage location KW - Laboratory test KW - Soft story KW - Stifness irregular structure KW - Structural health monitoring PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-624931 DO - https://doi.org/10.1155/stc/3453150 SN - 1545-2263 VL - 2025 IS - 1 SP - 1 EP - 17 PB - John Wiley & Sons Ltd. AN - OPUS4-62493 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Signorini, C. A1 - Bracklow, F. A1 - Hering, Marcus A1 - Butler, M. A1 - Leicht, L. A1 - Schubert, T. A1 - Beigh, M. A. B. A1 - Beckmann, B. A1 - Curbach, M. A1 - Mechtcherine, V. T1 - Ballistic limit and damage assessment of hybrid fibre-reinforced cementitious thin composite plates under impact loading N2 - Impact resistance of reinforced concrete (RC) structures can be significantly improved by strengthening RC members with thin composite layers featuring high damage tolerance. Indeed, to limit the well-known vulnerability of cement-based materials against impact loading, the synergistic effects of short fibres and continuous textile meshes as hybrid reinforcement has been proved to be highly beneficial. This paper addresses the characterisation of novel cement-based hybrid composites through accelerated drop-weight impact tests conducted on rectangular plates at different impact energies. Two distinct matrices are assessed, with particular interest in a newly developed limestone calcined clay cement (LC3)-based formulation. Important parameters quantifying energy dissipation capability, load bearing capacity and damage are cross-checked to compute the ballistic limit and estimate the safety-relevant characteristics of the different composites at hand. Although textiles alone can improve the damage tolerance of fine concrete to some extent, the crack-bridging attitude of short, well-dispersed fibres in hybrid composites imparts a certain ductility to the cement-based matrices, allowing a greater portion of the textile to be activated and significantly reducing the amount of matrix spalling under impact. KW - Impact loading KW - Cement-based composites KW - SHCC KW - TRC KW - Sustainable binders PY - 2023 DO - https://doi.org/10.1016/j.jobe.2023.108037 VL - 80 SP - 1 EP - 21 PB - Elsevier Ltd. AN - OPUS4-58793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, T. A1 - Bracklow, F. A1 - Unger, N. A1 - Hering, Marcus A1 - Beckmann, B. T1 - Impact Tests on Reinforced Concrete Slabs – Variation in Results and Residual Load Bearing Capacity due to Hard Impact N2 - Structures such as concrete slabs and concrete barriers of critical infrastructure facilities must be able to withstand impact events or severe accidents. In particular, the structural safety of the confinements of nuclear power plants against a possible aircraft impact is essential to ensure the safety of inhabitants and environment. This article presents research results of hard impact on reinforced concrete slabs, which have been carried out at the Institute of Concrete Structures (IMB) at TUD Dresden University of Technology Technische Universität (TU Dresden). A specially designed drop tower is available for this purpose on the premises of the Otto Mohr Laboratory of TU Dresden. In the framework of a research project many reinforced concrete slabs of dimension 1.5 x 1.5 x 0.2 m³ were tested by hard impact. The investigation on some already carried out impact tests on reinforced concrete slabs intend to show the range of deviation of impact tests. In particular, the possible standard deviations that should be regarded in impact tests are estimated for the applied test setup. Furthermore, the residual structural capacity of an undamaged and damaged reinforced concrete slab has been investigated. T2 - Conference: 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT) CY - Yokohama, Japan DA - 04.03.2024 KW - Reinforced Concrete KW - Drop Tower KW - Hard Impact PY - 2024 SP - 1 EP - 10 PB - IASMiRT CY - Yokohama, Japan AN - OPUS4-61915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano, Daniel A1 - Bulling, Jannis T1 - The SBFEM to simulate the scattering of ultrasonic guided waves interacting with defects in 3D plate structures N2 - In the field of guided waves for non-destructive testing, the interaction of these waves with damages or other discontinuities in a structure is critical. When a guided wave mode travels and hits a defect, it scatters in all directions, converting to other modes and reflecting the existing one. These interactions are captured in scattered far field complex amplitudes and characterise the elastodynamic behaviour of a defect completely. Simulating these interactions is challenging, and analytical solutions only exist for simple geometries. Still, using general tools like the finite element method results in large, usually costly models. We employ a method based on a numerical implementation of the Kirchhoff–Helmholtz integral that allows the computation of the scattering matrices using a model containing only the damaged region. However, classical techniques to resolve the far field and low-order elements are commonly used, leading to large models yet more efficient than using other strategies.We propose using the SBFEM as an alternative to enhance the computation of the far field scattering. The damaged region is discretised using high-order polyhedral elements, while the far field is constructed using a modified version of the SBFEM. Examples compared to the literature demonstrate the validity of the approach. T2 - DAGA 2024 - 50. Jahrestagung für Akustik CY - Hannover, Germany DA - 18.03.2024 KW - Simulations KW - Guided waves KW - SBFEM PY - 2024 SP - 636 EP - 639 CY - Hannover AN - OPUS4-62713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano, Daniel T1 - Modeling of Elastic Wave Propagation Using SBFEM and Mortar Coupling N2 - This work introduces a combination of the mortar finite element method with the scaled boundary finite element method (SBFEM) to address specific challenges in modelling elastic wave propagation. It particularly focuses on ultrasonic guided waves and their interactions with localized features. The primary goal is to decouple distinct regions of interest, which allows for independent meshing in areas where waves propagate or interact with discontinuities in the elastic media. A key distinction is made between the near field and far field regions. The near field encompasses zones where accurate representation of small features relative to the wavelength is crucial. In contrast, the far field includes homogeneous areas where waves propagate freely, eventually radiating outward in unbounded domains. Separating these regions improves computational efficiency by applying finer discretization only where necessary. This decoupling also enables the reuse of far field models in parametric analyses, particularly in scenarios focused on local wave interactions. The approach demonstrates significant potential in such applications and is validated through practical examples. T2 - Doktorandentreffen - Eberswalde 2024 CY - Eberswalde, Germany DA - 28.10.2024 KW - Guided waves KW - SBFEM KW - Simulations PY - 2024 AN - OPUS4-62714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano, Daniel T1 - Simulation of guided ultrasonic wave interactions with discontinuities using an SBFEM approach N2 - Guided ultrasonic waves are crucial in non-destructive testing and structural health monitoring applications. However, predicting their interaction with discontinuities in an elastic medium is complex, often necessitating extensive numerical simulations. These simulations typically require large models and significant computation times. In this contribution, we propose a novel Scaled Boundary Finite Element Method (SBFEM) approach that accurately computes the interactions between guided wave modes and geometrical discontinuities and significantly reduces the computational burden. The model uses a near field discretised with octree meshes, leveraging cell similarity and high order transition shape functions to connect different cell types within the decomposition, allowing for a high-order ansatz. Additionally, we decouple the far field/near field interface using a mortar method. This approach ensures that the octree mesh is independent of the far field discretisation, which employs a modified version of SBFEM for plate structures. To generate the necessary planar wavefield for interaction, we approximate the Helmholtz-Kirchhoff integral directly within the octree mesh. Computing this boundary integral on the octree mesh has the advantage of optimising the calculation of the dipoles of the Green's function due to the mesh's squared or rectangular cell structure. This numerical framework produces reliable results with low errors for the scattered field arising from guided ultrasonic wave interactions with defects. T2 - The Sixth Workshop on Recent Progress of the Scaled Boundary Finite Element Method (SBFEM 2024) CY - Nanchang, China DA - 22.11.2024 KW - Guided waves KW - SBFEM KW - Simulations PY - 2024 AN - OPUS4-62716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Robens-Radermacher, Annika A1 - Strobl, Dominic T1 - PGDrome N2 - A FEniCS based python module of the Proper Generalized Decomposition (PGD) method. KW - Reduced Order Model KW - Proper Generalized Decomposition KW - Fenics PY - 2023 DO - https://doi.org/10.5281/zenodo.10075334 PB - Zenodo CY - Geneva AN - OPUS4-59134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hering, Marcus A1 - Fiedler, Georg T1 - Investigation of multiple impact-damaged reinforced concrete structures as a reference for liquid penetration behavior and tomographic studies N2 - The structural integrity of outer reinforced concrete (RC) containments of nuclear power plants provides an essential shield against external hazards. If this containment is damaged by an impact event, such as an aircraft crash, the question arises to which degree the reinforced concrete containment still has its protective capability. This concerns both purely structural protection and protection against liquids penetrating the interior of the containment. Due to the dimensions of the containment structures, it is difficult to perform real scale impact experiments, so in the past decades plate geometries at medium scale have been used for investigations. Detailed investigations on the structural behaviour of RC members or RC plates subjected to impact loading have already been presented in Just et al., Hering, Hering et al., Bracklow et al., Hille et al. and Nerger et al. The following investigations deal with the single and multiple impact event (first hard impact and/or subsequent soft impact) on a RC specimen, which provides the basis for further investigations. A description of the test setup and the test procedure as well as a presentation of the test results from the impact tests are provided. Furthermore, the experimental program is presented, which the damaged RC specimens are to undergo to deal with the question of how much the impact-damaged RC structure has become permeable to liquid media, such as water and kerosene, depending on the intensity of the impact. The aim of these following investigations is to develop a test setup that can be applied to investigate the liquid penetration behaviour (LPB) of small, medium, and large-scale RC members. In addition to the liquid penetration experiments, the damaged specimens are to be examined by planar tomography to obtain the damage inside the specimen. The combination of damaging event, fluid penetration behaviour and tomography should enable a comprehensive understanding of the damage to the RC specimen. T2 - Conference: 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT) CY - Yokohama, Japan DA - 04.03.2024 KW - Drop Tower KW - Hard Impact KW - Multiple Impact KW - Soft Impact PY - 2024 AN - OPUS4-61991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin T1 - Measuring Dynamic Behavior and Damage Evolution of a Reinforced Concrete Wall Subjected to Explosive Blasts using Embedded Distributed Fiber Optic Sensors N2 - Results from highly dynamic and static strain measurements, respectively, using embedded distributed fiber optic sensors in a steel-reinforced concrete wall under explosive blast-loading are presented, detailing the structure’s dynamic behavior and the evolutions of cracks. T2 - 28th International Conference on Optical Fiber Sensors (OFS-28) CY - Hamamatsu, Japan DA - 20.11.2023 KW - Distributed acoustic sensing KW - DAS KW - Structural response KW - Blast experiment KW - Embedded fiber optic sensor PY - 2023 AN - OPUS4-59094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hering, Marcus A1 - Fiedler, Georg A1 - Schubert, T. A1 - Hille, Falk A1 - Hüsken, Götz A1 - Beckmann, B. A1 - Grunwald, Marcel A1 - Redmer, Bernhard A1 - Rogge, Andreas T1 - Investigation of multiple impact-damaged reinforced concrete structures as a reference for liquid penetration behavior and tomographic studies N2 - The structural integrity of outer reinforced concrete (RC) containments of nuclear power plants provides an essential shield against external hazards. If this containment is damaged by an impact event, such as an aircraft crash, the question arises to which degree the reinforced concrete containment still has its protective capability. This concerns both purely structural protection and protection against liquids penetrating the interior of the containment. Due to the dimensions of the containment structures, it is difficult to perform real scale impact experiments, so in the past decades plate geometries at medium scale have been used for investigations. Detailed investigations on the structural behaviour of RC members or RC plates subjected to impact loading have already been presented in Just et al., Hering, Hering et al., Bracklow et al., Hille et al. and Nerger et al. The following investigations deal with the single and multiple impact event (first hard impact and/or subsequent soft impact) on a RC specimen, which provides the basis for further investigations. A description of the test setup and the test procedure as well as a presentation of the test results from the impact tests are provided. Furthermore, the experimental program is presented, which the damaged RC specimens are to undergo to deal with the question of how much the impact-damaged RC structure has become permeable to liquid media, such as water and kerosene, depending on the intensity of the impact. The aim of these following investigations is to develop a test setup that can be applied to investigate the liquid penetration behaviour (LPB) of small, medium, and large-scale RC members. In addition to the liquid penetration experiments, the damaged specimens are to be examined by planar tomography to obtain the damage inside the specimen. The combination of damaging event, fluid penetration behaviour and tomography should enable a comprehensive understanding of the damage to the RC specimen. T2 - Conference: 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT) CY - Yokohama, Japan DA - 04.03.2024 KW - Drop tower KW - Hard impact KW - Soft impact KW - Multiple impact PY - 2024 SP - 1 EP - 10 PB - IASMiRT CY - Yokohama, Japan AN - OPUS4-59723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hering, Marcus A1 - Agasty, Amit A1 - Costard, René A1 - Hüsken, Götz A1 - Chruscicki, Sebastian A1 - Hicke, Konstantin T1 - Explosion effects on reinforced concrete structures – A preliminary study of scaling laws N2 - Blast tests are required to investigate accidental or intentional blast events and to assess the level of protection for people and facilities in critical infrastructures. Conducting large-scale field tests for complex scenarios is very resource intensive. Reliable small-scale experiments are a promising alternative. However, the scaling laws for the design of reinforced concrete structures under blast loads are not sufficiently established. In our research work, a consortium made up of three BAM departments, focuses on reinforced concrete structures that are suitable for the standardization of scaled blast tests. As part of the feasibility study, blast tests were carried out on test specimens of different sizes on the BAM Test Site for Technical Safety (TTS). Various reinforced concrete plates were tested and subjected to different blast loads. The blast tests included various measurement techniques to quantify the blast load and the behavior of the reinforced concrete plate. The blast load was measured with flush-mounted piezoelectric pressure gauges, while accelerometers and embedded fiber optic sensor cables were used to characterize the dynamic behavior of the plate under blast loading. In addition, damage characteristics were also determined using distributed fiber optic sensing. The application of these measurement techniques as well as the use of different numerical software tools offer the possibility to verify or adapt the scaling laws. T2 - 19th International Symposium on Interaction of the Effects of Munitions with Structures (19th ISIEMS) CY - Bonn, Germany DA - 09.12.2024 KW - Scaling KW - Blast KW - Fiber optic sensing PY - 2024 SP - 1 EP - 9 AN - OPUS4-62258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Replica scaling of RC slabs under blast loading: a preliminary assessment N2 - Blast testing is undoubtedly the most straightforward and direct method of evaluating the blast resistance of a structure. For the calibration and validation of numerical models as well, blast tests must be carried out. However, true-scale prototype testing under different blast loading scenarios is not always feasible. Reliable small-scale experiments are a promising alternative. Application of dimensional analysis and similarity principals can be found in different engineering fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to the scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited, specifically under blast loading. In a preliminary study, we tested RC slabs at two different scales under near-field blast loading. Replica scaling, which is geometrical scaling while using the same materials at different scales, was implemented in the construction of the test specimens. The assessment of scaling and the discrepancy in its application was investigated by characterizing the blast loads, dynamic response, and damage. The experiments were supplemented by numerical simulations of these scenarios. The quantification of scenario-and-response-specific discrepancy can be used to modify the scaling laws, so that a blast assessment can be performed based on resource efficient small-scale tests. T2 - 25th International Physical Security Forum CY - Schwarzenburg, Switzerland DA - 11.05.2025 KW - Blast KW - RC slabs KW - Scaling PY - 2025 AN - OPUS4-63184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit A1 - Hering, Marcus T1 - Experimental and Numerical Analysis of Reinforced Concrete Structures Under Blast Loading: Scopes and Challenges N2 - Protection against terrorist or accidental scenarios in industrial settings requires suitable designs of structures to resist blast loads. Field testing as well as finite element simulations are among the techniques available to engineers in the understanding of the structural behavior against blast loading. As blast testing of complex scenarios can be very resource intensive, tests are generally performed for simplified scenarios. Numerical tools can be used to model these scenarios in order to get a better insight into blast loading, structural response and the resulting damage to the structure. In the next steps, the simplified scenario is successively modified in numerical simulations to incorporate complexities that cannot be covered in blast testing experiments. One of the conditions for this approach to work is that the original simplified numerical simulation is valid. The scopes and challenges encountered in such a validation are the focus of this presentation. A relatively ‘simple’ field test of a horizontal reinforced concrete (RC) slab subjected to blast loading is taken as an example for validation of the performance of numerical tools. The blast test incorporated various measurement techniques to quantify the blast load as well as the behavior of the RC slab. Blast load was measured using flush-mounted piezoelectric pressure gauges, whereas acceleration sensors and fiber-optic sensor cables were used to characterize the dynamic behavior of the slab under blast loading. Additionally, damage characteristics were ascertained also using fiber-optic sensing. The application of such measurement techniques, along with different numerical software available for the analysis of the scenario in question, demonstrate the scope of our contribution. T2 - 24th International Physical Security Forum Brussels CY - Brussels, Belgium DA - 15.04.2024 KW - Blast KW - Reinforced Concrete Structures KW - Numerical simulations PY - 2024 AN - OPUS4-60880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hering, Marcus T1 - Explosion effects on reinforced concrete structures: A preliminary study of scaling laws N2 - Blast tests are required to investigate accidental or intentional blast events and to assess the level of protection for people and facilities in critical infrastructures. Conducting large-scale field tests for complex scenarios is very resource intensive. Reliable small-scale experiments are a promising alternative. However, the scaling laws for the design of reinforced concrete structures under blast loads are not sufficiently established. In our research work, a consortium made up of three BAM departments, focuses on reinforced concrete structures that are suitable for the standardization of scaled blast tests. As part of the feasibility study, blast tests were carried out on test specimens of different sizes on the BAM Test Site for Technical Safety (TTS). Various reinforced concrete plates were tested and subjected to different blast loads. The blast tests included various measurement techniques to quantify the blast load and the behavior of the reinforced concrete plate. The blast load was measured with flush-mounted piezoelectric pressure gauges, while accelerometers and embedded fiber optic sensor cables were used to characterize the dynamic behavior of the plate under blast loading. In addition, damage characteristics were also determined using distributed fiber optic sensing. The application of these measurement techniques as well as the use of different numerical software tools offer the possibility to verify or adapt the scaling laws. T2 - 19th International Symposium on Interaction of the Effects of Munitions with Structures (19th ISIEMS) CY - Bonn, Germany DA - 09.12.2024 KW - Blast KW - Fiber optic sensing KW - Scaling PY - 2024 AN - OPUS4-62260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Costard, René T1 - Auswirkungsbetrachtungen auf Strukturen T1 - Scaling of Blast Effects on Reinforced Concrete Structures N2 - Protection against terroristic or accidental scenarios in industrial settings requires suitable designs of structures to resist blast loads. Field testing as well as finite element simulations are among the techniques available to engineers in the understanding of the structural behavior against blast loading. As blast testing of complex scenarios can be very resource intensive, tests are generally performed for simplified scenarios. Numerical tools can be used to model these scenarios to get better insight into blast loading, structural response, and the resulting damage to the structure. During the next steps, the simplified scenario is successively modified in numerical simulations to incorporate complexities that cannot be covered in blast testing experiments. One of the conditions for this approach to work is that the original simplified numerical simulation is valid. The scopes and challenges encountered in such a validation are the focus of this presentation/article. A relatively ‘simple’ field test of a horizontal reinforced concrete (RC) slab subjected to blast loading is taken as an example for validation of the performance of numerical tools. The blast test incorporated various measurement techniques to quantify the blast load as well as the behavior of the RC slab. Blast load was measured using flush mounted piezoelectric pressure gauges, whereas acceleration sensors and fiber-optic sensor cables were used to characterize the dynamic behavior of the slab under blast loading. Additionally, damage characteristics were ascertained also using fiber optic sensing. The application of such measurement techniques, along with different numerical software available for the analysis of the scenario in question, demonstrate the scope of our contribution. When it comes to the challenges, it begins with proper instrumentation of the test specimen followed by the data processing. For numerical modelling, geometric conditions with appropriate boundary constraints, physical conditions such as the configuration of the rebars, as well as material parameters add to this challenge. The issues of choosing appropriate material models and comparison of results with multiple software tools will be discussed. This discussion forms the basis for a coherent approach to technical-safety assessment of blast effects on structures in its broader sense. T2 - Beiratssitzung Infrastruktur CY - Berlin, Germany DA - 11.04.2024 KW - Blast KW - Scaling KW - Fiber optic sensing KW - CFD KW - FEM PY - 2024 AN - OPUS4-59849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Structural behavior and damage assessment of a reinforced concrete wall by various NDT methods and embedded sensors under blast-loading N2 - A safety or security related assessment of explosions, accidental and intentional scenarios alike, often necessitate performance of replication-tests. Such test results are necessary to clarify the causes within the scope of forensic investigations. To gain important insights into the behavior of structures and materials under such loading, field tests may also be performed in accordance with different test standards. To determine the resistance of building-structures after explosions, estimation of the residual load-bearing capacity in addition to the assessment of dynamic structural response and damage to the building components is important. In most cases an evaluation of structural integrity is based only on the visual damage, resulting in an overestimation of the residual capacity. The Bundesanstalt für Materialforschung und -prüfung (BAM) operates the Test site for Technical Safety (TTS) on an area measuring about 12 km2 in the Federal State of Brandenburg for execution of true-to-scale explosion tests. At the TTS, building component testing was performed to assess the suitability of different non-destructive testing methods to characterize the dynamic structural response and damage resulting from the detonation of high explosives. Different blast-loading scenarios were realized by varying the net explosive mass and the standoff distance with all scenarios representing a near-field detonation. The test object was a reinforced concrete wall 2 m high, 2.5 m wide and 20 cm thick, fixed at both vertical edges. The dynamic loading of the wall was characterized with 8 piezoelectric pressure sensors flush-mounted on the front surface, thus measuring the reflected pressures from the shock wave. The tests were conducted with the aim of characterizing the global behavior of the wall under dynamic shock loading and the resulting local damage pattern, respectively. High speed digital image correlation was implemented in combination with multiple acceleration sensors to observe the rear surface of the wall to chart the dynamic deflection during the loading and to determine the residual deformation after the loading had ceased. In addition, one test specimen was instrumented with fiber optic sensor cables, both fixed to the rebars and embedded in the concrete-matrix, respectively. Firstly, these sensors were interrogated during the blast test by a distributed acoustic sensing (DAS) device using a particularly high sampling rate to measure the shock-induced vibrations in the structure with high temporal resolution. This delivers information on dynamics of compression and tension cycles from within the structure. Secondly, the local damage-pattern emerging during the series of blasts was determined via distributed fiber optic strain sensing (DSS) by interrogating the embedded fiber optic sensors with a high spatial resolution DSS device after each blast. This enabled the characterization of non-visual damage to the structure, in particular with regard to the formation of localized cracks in the concrete matrix. The DSS was further complimented by a structure-scanner based on ultrasonic measurements. Our contribution describes this new test approach in detail. Results of the three datasets, namely dynamic shock loading, global behavior of the test object and the local damage pattern will be presented. The suitability of the implemented measurement methods will be discussed in combination with the challenges in their application for technical safety evaluation of building components under explosive loading. T2 - 26th International Symposium on Military Aspects of Blast and Shock (MABS26) CY - Wollongong, Australia DA - 03.12.2023 KW - Blast tests KW - Reflected pressure KW - Embedded sensors KW - Distributed fiber optic sensors KW - Acceleration sensors KW - Digital image correlation KW - Ultrasonic structure-scanner PY - 2023 AN - OPUS4-58927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gerbeit, Marco A1 - Seeber, Henrik A1 - Grasse, Dennis A1 - Donner, Marcel A1 - Grobert, Steffen A1 - Krentel, Daniel T1 - Test set-up for reproducible shock wave generation N2 - A test setup was developed at the BAM test site to generate and record reproducible, adjustable shock waves resulting from gas detonations. The setup is used to study the impact of blasts on humans and structures with short setup times. To further develop this innovative test bench and improve reproducibility, the ignition source and gas composition is analysed in more detail. The experimental setup consists of a cylindrical pressure vessel (autoclave) that is operated with acetylene and oxygen at ambient pressure. The elevated pressure resulting from the combustion process is released through an orifice by the instantaneous rupture of a diaphragm. The shock propagates symmetrically into the free field, where it interacts with the models and sensors to be analysed. With this design, shock waves with a typical ideal Friedlander waveform characteristic, except for a reflection and a muzzle blast-like behavior that deviates from the ideal characteristics, can be generated. This setup enables an average peak overpressure of 88 kPa. By using exploding wires as an ignition source in comparison to a fusehead, the reproducibility was significantly increased during the test to σ=2.8 kPa from σ=9.5 kPa previously. The presented data confirms the quality and reliability of this setup in generating realistic, reproducible shocks. KW - Overpressure KW - Shock wave KW - Blast KW - Ignition source KW - Autoclave PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-637859 DO - https://doi.org/10.1016/j.jlp.2025.105736 SN - 0950-4230 VL - 98 SP - 1 EP - 6 PB - Elsevier Ltd. AN - OPUS4-63785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rogge, Andreas T1 - Large scale impact tests with reinforced concrete plates for impact safety N2 - As part of a nuclear safety research project, large-scale impact tests were conducted on reinforced concrete slabs to investigate the structural integrity of containment structures under aircraft crash scenarios. The aim was to experimentally validate numerical models for both hard and soft impact conditions. Using a drop tower, concrete slabs were subjected to controlled impacts with a 404 kg impactor dropped from a height of 9.5 meters. The tests included force measurements, photogrammetric evaluations, and 3D scans to analyze deformations and damage. A total of six impact experiments were performed (2x hard impact, 2x combined hard/soft impact). The results provide a robust basis for advancing safety assessments of nuclear facilities. T2 - SMiRT28 - 28th International Conference on Structural Mechanics In Reactor Technology CY - Toronto, Canada DA - 10.08.2025 KW - Experimental mechanics KW - Aircraft crash scenario KW - Coupled impact loading PY - 2025 AN - OPUS4-64126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Lengas, Nikolaos T1 - Parameter study of impact targets in the drop test of packaging for dangerous goods N2 - Within the transportation chain, impact loading of dangerous goods packagings can happen. Thus, a package’s resistance against mechanical damage needs to be assessed. In the context of dangerous goods transport, drop tests are used for damage assessment as a part of packaging approval. Hence, a horizontal, flat unyielding surface must be provided to ensure maximum damage on impact and univocal test results. Leading adopted regulations like ADR/RID reference ISO 2248 to specify the requirements for the impact surface. The main requirement states that the impact surface must belong to an impact target with a mass at least 50 times higher than that of the heaviest package to be tested. However, many manufacturers in Germany, especially manufacturers of fibreboard boxes, do not have their own testing device with the required mass ratio for the drop test. Furthermore, the necessity of requirement revision has been addressed at UN level. It is unclear if mass ratio is the decisive criterion or if alternative design parameters can be defined to guarantee rigidity of the impact surface. The focus of the research reported in this thesis lays in the development and implementation of an analysis and testing concept for a comprehensive investigation of impact targets in drop testing. To this end, an experimental setup consisting of regulation compliant model impact targets is used in drop tests with two packaging types of significantly different mechanical properties. The variation of drop test parameters, such as the mass ratio, provides new insights into their respective significance in the drop test outcome. In addition, experimental findings are enhanced with numerical Finite-Element (FE) analyses to propose new improved criteria which incorporate all relevant influencing factors. In this way, firstly, critical impact target designs can be identified, and secondly, the kinetic energy of a real impact target in a drop test can be reliably approximated and compared to the respective theoretical threshold derived from a worst-case assumption. Thus, the rigid mass ratio currently specified in ISO 2248 can be regarded obsolete. The results of this work are highly beneficial for industrial application since they form the basis for introducing a standardized method for evaluating impact targets, replacing the 50 times mass ratio requirement. This would enable manufacturing and testing facilities to ensure a uniform level of safety assessment and to avoid the considerably high construction costs of impact targets with mass ratio of 1:50 in relation to packaging gross masses of several hundred kilograms. Hence, to make the results attained under laboratory conditions usable in practical application, preliminary investigations of the mechanical response of installed impact targets are conducted. For this purpose, important factors such as the interaction between impact target and ground in dynamic impact testing conditions are examined using validated FE models to establish an evaluation method. The investigations aim to create the basis for the revision of ISO 2248 and to define a standardized reference method for impact target characterization. KW - Drop test KW - Structural dynamics KW - Dangerous goods packaging KW - Mass ratio KW - Finite-element-method PY - 2025 DO - https://doi.org/10.14279/depositonce-24333 SP - 1 EP - 189 CY - Berlin AN - OPUS4-64090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - Mesh-convergence and gradient-enhanced models in blast simulations of concrete structures N2 - Blast experiments on reinforced concrete structures are often limited to small structures and therefore simple shock waves. Such experiments are carried out at the Bundesanstalt für Materialforschung und -prüfung (BAM) and the structural response is investigated using several measuring methods. Complex load scenarios that occur as a result of reflection of the shock wave in larger structures are harder to realise in practice. Numerical simulations for the propagation of the shock wave and the structural response can therefore be an alternative method for the investigation of blast loads on complex structures. For the simulation of concrete under impact and blast loads, several local constitutive models exist that are formulated as plasticity models with softening taken into account by introducing a scalar damage field. Local damage models however often lead to mesh-dependent results which do not converge with mesh refinement. In order to achieve meaningful predictions from numerical experiments, independence from the mesh is needed. In this contribution, the JH2 model (Johnson and Holmquist 1994) with a parameter set for concrete is investigated in a simple blast load scenario. The shockwave is implemented as a simplified Friedlander-curve and the overpressures are applied as a boundary condition for the structural simulation. In order to account for large displacements that can occur during blast loads, an updated Lagrangian formulation is utilised. A Runge-Kutta method with adaptive time stepping is used to advance the solution in time. The open source FEM software FEniCS (Logg et al. 2012) is used together with an implementation of the JH2 model which has been developed at BAM. An extensive convergence analysis with both timestep- and mesh-refinement is carried out to show the mesh dependency. In order to make the results independent of the mesh, possible nonlocal versions of the JH2 model with gradient-enhancement are presented. Since many damage models for concrete share the damage mechanism of the JH2 model, the application of the regularisation methods to more complex material models, like the RHT model (Grunwald et al. 2017), is also discussed. Advantages of a gradient-enhanced formulation to simulate dynamic strength increase of concrete, as suggested in (Häußler-Combe and Kitzig 2009), is discussed as well. T2 - ECCOMAS YIC 2023 CY - Porto, Portugal DA - 19.06.2023 KW - Gradient-Damage KW - Explicit Dynamics KW - Concrete Modeling KW - Mesh Convergence PY - 2023 AN - OPUS4-58717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerbeit, Marco T1 - An apparatus for generating reproducible and scalable shock waves in the free field N2 - A simple test bench was set up on the BAM test site to investigate shock waves caused by gas detonations. The aim was to build a simple mobile test bench that can be used for various applications, to demonstrate the vaildity and for comparison with other test benches. For this purpose a balloon filled with acetylene and oxygen at atmospheric pressure with an electric ignitor was used. The characteristics of the shock waves can be scaled via the gaseous mixture, the filling quantity of the balloon and the distance to the sensors. Pressure sensors were set up around the balloon at various distances to measure the shock. With the help of the high-speed recordings and the Rankine Hugoniot equations, the shock front pressure was estimated and compared with the results of the pressure sensors. In order to validate the results of this test bench, they were compared with an experiment using plastic explosive no. 4 . These agreed well with the results. Overall, symmetrical undisturbed scalable shock waves can be generated with the setup. Only the reproducibility, which is comparatively poor to open shock tubes due to the influence of wind, had to be improved. T2 - 35th International Symposium on Shock Waves (ISSW35) CY - Brisbane, Australia DA - 07.07.2025 KW - Shock waves KW - BOS KW - Gas detonation PY - 2025 AN - OPUS4-63786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - A Preliminary Study on the Scaling of RC Structures under Blasting Loading N2 - Current capabilities for full-scale field blast testing are highly resource intensive. Reliable small-scale experiments are an effective alternative. Characterization of the dynamic response and damage of RC elements to scaled blast loads was investigated in scaled-down field experiments. Spatially resolved information on the dynamic structural response to blast loading was obtained using distributed fiber optic acoustic sensing (DAS), acceleration sensors as well as piezoelectric pressure sensors. T2 - 46. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 25.04.2025 KW - Explosives KW - Blast and scaling effects KW - Concrete PY - 2025 AN - OPUS4-62994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Numerical analysis of structures under blast loading N2 - Blast tests are indispensable for investigations of accidental or intentional explosions and to evaluate the level of protection to people and equipment within critical infrastructure. Current capabilities for detailed blast effects assessment are limited to performing full-scale field testing, which, for complex scenarios, are highly resource intensive. In this regard, reliable numerical simulations are an effective alternative option. A discussion of the scope and challenges of using numerical tools for a technical-safety assessment of reinforced concrete structures under blast loading is presented. Different coupling possibilities between shock wave simulations and structural simulations with the help of practical examples is given. An outlook on the development of new methods for structural simulations currently being researched at BAM concludes the presentation. T2 - Exerter Final Conference, 2023 CY - Soest, The Netherlands DA - 24.04.2023 KW - Coupling KW - Numerical Simulation KW - Blast KW - Structural Analysis KW - FSI PY - 2023 AN - OPUS4-57458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Costard, René T1 - Dynamic response of reinforced concrete (RC) components in scaled-down blast tests N2 - Der Beitrag präsentiert erste Ergebnisse aus dem BAM-internen Projekt AP5 Security zum Thema Charakterisierung der dynamischen Reaktion und Schädigung von Stahlbetonbauteilen. T2 - 44.Informationstagung Sprengtechnik CY - Siegen, Germany DA - 14.04.2023 KW - Explosionsbelastung auf Strukturen KW - Beton KW - Numerik PY - 2023 AN - OPUS4-57313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Chruscicki, Sebastian A1 - Breithaupt, Mathias A1 - Costard, René A1 - Kind, Thomas A1 - Hüsken, Götz A1 - Agasty, Amit T1 - Measuring Dynamic Behavior and Damage Evolution of a Reinforced Concrete Wall Subjected to Explosive Blasts using Embedded Distributed Fiber Optic Sensors N2 - Results from highly dynamic and static strain measurements, respectively, using embedded distributed fiber optic sensors in a steel-reinforced concrete wall under explosive blast-loading are presented, detailing the structure’s dynamic behavior and the evolutions of cracks. T2 - 28th International Conference on Optical Fiber Sensors (OFS-28) CY - Hamamatsu, Japan DA - 20.11.2023 KW - Distributed acoustic sensing KW - DAS KW - Structural response KW - Blast experiment KW - Embedded fiber optic sensor PY - 2023 SP - 1 EP - 4 PB - Optica CY - Washington D.C., USA AN - OPUS4-59096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit A1 - Costard, René T1 - Dynamic response of reinforced concrete (RC) components in scaled-down blast tests N2 - Current capabilities for full-scale field testing are highly resource intensive. Reliable small-scale experiments are an effective alternative. Characterization of the dynamic response and damage of RC elements to scaled blast loads was investigated in scaled-down field experiments. Spatially resolved information on the dynamic structural response using distributed fiber optic acoustic sensing (DAS) and acceleration as well as blast loading by piezoelectric pressure sensors. T2 - 45. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 05.04.2024 KW - Blast tests KW - Reinforced concrete KW - Acceleration sensors PY - 2024 AN - OPUS4-59808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Weege, S. A1 - Roske, T. A1 - Krebber, Katerina T1 - Leakage detection at a borehole simulator using distributed acoustic sensing N2 - A distributed acoustic sensing system is used to detect the leakage in a borehole simulator by measuring the leakage induced vibration. The leakage location can be clearly determined by frequency spectrum analysis. T2 - 27th International Conference on Optical Fiber Sensors (OFS-27) CY - Alexandria, VA, USA DA - 29.08.2022 KW - Leakage detection KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing PY - 2022 SP - 1 EP - 4 PB - Optica CY - Washington D.C., USA AN - OPUS4-56097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liao, Chun-Man A1 - Niederleithinger, Ernst A1 - Bernauer, F A1 - Igel, H A1 - Hadziioannou, Céline T1 - Wave-Screening Methods for Prestress-Loss Assessment of a Large-Scale Post-Tensioned Concrete Bridge Model Under Outdoor Conditions N2 - This paper presents advancements in structural health monitoring (SHM) techniques, with a particular focus on wave-screening methods for assessing prestress loss in a large-scale prestressed concrete (PC) bridge model under outdoor conditions. The wave-screening process utilizes low-frequency wave propagation obtained from seismic interferometry of structural free vibrations and high-frequency wave propagation obtained through ultrasonic transducers embedded in the structure. An adjustable post-tensioning system was employed in a series of experiments to simulate prestress loss. By comparing bridge vibrations under varying post-tensioning forces, the study investigated prestress loss and examined temperature-related effects using the coda wave interferometry (CWI) method. Local structural alterations were analyzed through wave velocity variations, demonstrating sensitivity to bridge temperature changes. The findings indicate that wave-based methods are more effective than traditional modal analysis for damage detection, highlighting the dual impacts of prestress loss and temperature, as well as damage localization. This study underscores the need for long-term measurements to account for temperature fluctuations when analyzing vibration measurements to investigate changes in prestressing force in PC structures. KW - Coda wave interferometry KW - Damage detection KW - Prestress loss KW - Seismic interferometry KW - SHM KW - Temperature influence KW - Ultrasonics KW - Wave-screening PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634244 UR - https://www.mdpi.com/2076-3417/15/11/6005 DO - https://doi.org/10.3390/app15116005 VL - 15 IS - 11 SP - 1 EP - 18 PB - MDPI AN - OPUS4-63424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerbeit, Marco T1 - Background oriented Schlieren measurements for pressure relief systems in the free field N2 - Shock waves or shocks are a supersonic phenomenon in which the flow variables change abruptly in a thin layer. These occur with super sonic flow, such as the supersonic flight of airplanes or rockets or with explosions. As the pressure, temperature and density change in a shock, this can be recorded. The most commonly used approach is the use of pressure sensors. Pressure information is only available at the certain locations where the sensors are installed. Any body, such as free-standing sensors, that is introduced into the flow, distorts it. Therefore, not inverse measurement methods for measuring flow variables, such as the background orientated schlieren (BOS) method or the partical image velocimetry (PIV), are used. For this reason, a BOS setup was carried out in an open field at the Test Site Technical Safety (TTS) of BAM using a shock wave generator to visualize the shocks that result from a gas explosion. These investigations are presented in this paper. The aim is also to draw conclusions about the pressure change caused by the shock and the advantages that such a simple structure provides to the tests. T2 - 30th International Colloquium on the Dynamics of Explosions and Reactive Systems CY - Ottawa, Canada DA - 28.07.2025 KW - BOS KW - Blast KW - Shock PY - 2025 AN - OPUS4-63915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Investigation of Shock Wave Propagation in Soft Tissue Simulants: An Analysis of Organic Gelatin and Synthetic Gel N2 - This study investigates the effects of shock waves on soft tissue simulants, focusing on organic gelatin and a synthetic gel. Although extensive research has focused on the mechanical properties of soft tissue simulants, their behavior under shock wave conditions, such as those caused by blasts, is less understood. As explosives are increasingly used in modern combat scenarios, it is essential to study how shock waves interact with soft tissue. This knowledge is crucial for improving protective equipment and evaluating blast effects on the human body. A two-phase methodology was applied: First, organic gelatin production and synthetic gel composition were analyzed, identifying uncertainties and measuring sound speeds at varying temperatures to align with human tissue properties. Second, simulants were subjected to free-field shock waves, and embedded pressure sensors captured wave propagation, peak overpressures, and propagation velocity. Findings provide comparative insights into shock wave responses of simulants, offering a foundation for future experimental setups. KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Druckwelle PY - 2025 SN - 9781605956978 VL - 34 SP - 63 EP - 79 PB - DEStech Publications Inc. CY - USA AN - OPUS4-63320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik A1 - Grobert, Steffen A1 - Krentel, Daniel T1 - Description of a measurement setup for the combined measurement of LLB exposures in dynamic situations using high-resolution measurement technology N2 - In order to gain an understanding of the Low Level Blast (LLB) exposure of soldiers when using weapon systems, it is necessary to characterize these weapon systems with regard to their overpressure effect [1]. Carrying out static measurements of weapon systems in the rough terrain of firing ranges and training areas poses a challenge for sensitive measurement technology. Furthermore, soldiers are often exposed to LLB in dynamic situations [2]. Therefore, commercially available blast gauges are often used, which, however, are not sufficient for high-resolution measurement of overpressure exposures with academic requirements due to their intended use [3]. Static measurement setups, such as with penile probes, must be used to characterize weapon systems, but they cannot make valid statements about the real load on dynamically behaving soldiers. However, this real load on the soldier is essential in order to be able to adequately assess the potential resulting medical effects. As part of this challenging measurement task, a prototype of a self-sufficient, high-resolution measurement system is presented, which can be used by an operator in dynamic situations without interference. The complete measuring chain was realized as a self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the measuring card. The measuring computer is attached to the front of the backpack to allow quick access. The measuring system is capable of recording four channels with a sampling rate of up to 2 MHz. Piezoelectric integrated charge pressure sensors are used as a high-resolution pressure sensor (type: PCB138B32). The pressure sensor is placed on a XX- carrier plates with the dimensions XY × YY. The pressure sensors are attached at the typical positions for Blast-Gauges measurements, like on the left shoulder, on the upper chest and on the back of the head. At the same time, commercial blast gauges are placed at the positions of the pressure sensors to qualify the blast gauges (type: B3 Blast Gauges Gen 6). The measuring system is referred to as a “Sensor Carrier Operator (StEk)”. As part of the functional testing of the measurement system, tests are carried out with hand weapons. For this purpose, a soldier is equipped with the StEk and blast gauges. The handguns used are the pistole P8 (caliber 9 mm) and the long rifle G36 (caliber 5.56 mm). The firing position is standing freehand. In addition, the soldier carried out an examination of the carrying comfort of the StEk as part of the training. Furthermore, it was evaluated whether the measuring chain was adequately integrated into the measuring system. The quality of the pressure measurement was also examined, whereby a direct comparison was made with the blast gauges. The measurement system presented here enables the combined (static and dynamic) scientific characterization of weapon systems, particularly with regard to overpressure loading. T2 - Research Specialist Meeting HFM 371 (NATO STO) CY - Toronto, Canada DA - 09.04.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 SP - 1 EP - 8 AN - OPUS4-63322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Use of the shockwave generator for research on low-level blast effects - Monitoring vs. measurement tools N2 - In order to contribute to the research efforts on primary explosion effects, an experimental setup was created to generate realistic overpressure load cases under the most reproducible conditions and with short setup times. One focus of the project is now the applicability of this test setup for Low Level Blast (LLB) testing [1-3]. The basis of our experimental setup is the Shockwave Generator (SWG), which has already been presented in detail [4]. In addition, a stand-alone measurement system has been developed that can be worn by the operators who are exposed to LLB. The measuring system is referred to as the ´Sensor Carrier for Operator´ (StEk; German abbr.: Sensortraeger Einsatzkraft). With the StEk, it is possible to record LLB exposures in training scenarios with a measuring accuracy satisfying scientific requirements and thus to classify the corresponding LLB load case of the respective weapon system or training scenario. In the test series presented here, the StEk was attached to an operator dummy and exposed to an overpressure load case. The results of the StEk were compared with a pencil probe (PP), which was positioned symmetrically to the StEk in the undisturbed blast propagation area of the SWG. The aim of the test series was to compare the accuracy of the self-sufficient measurement setup StEk with the conventional pressure measurement method (PP). Conventional, market-available blast exposure monitoring device (BEMD) (type: B3 Blast Gauges Gen.6) were used in parallel to check their accuracy. Setup & Method The experimental setup is shown in Figure 1 (left). The StEk system was attached to a dummy placed at a 45° angle to the SWG pressure outlet at a distance of 1 m. A PP was placed axially mirrored. The sensors of the StEk were placed in the typical positions for BEMD. With reference to the incident shockwave, one sensor was placed on the chest (face-on) and one on the shoulder (side-on). The BEMDs were also placed in the same positions. The standalone StEk measurement system is described in the following. The complete measuring chain was realized as one stand-alone, self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the data acquisition system (DAQ) (Figure 1 (right)). The amplifier has four channels, an integrated 50 kHz low pass filter and is suitable for use with integrated charge piezoelectric (ICP) pressure sensors. A sampling rate of up to 2 MHz can be used Data is stored in a buffer of 64 MS. The computer, a Tablet PC, is attached to the front of the backpack to allow quick access. The pressure sensors are connected to the BNC interfaces on the outside of the housing using coiled BNC cables. The coiled BNC cables allow maximum freedom of movement and reduce mechanical stress on the couplings. In the current configuration, up to four ICP pressure sensors can be mounted on the operator (type: PCB132B38). The pressure sensors are flush-mounted in a 30 mm × 30 mm carrier plate. Results & Discussion Figure 2 (a) shows the overpressure generated by the SWG measured with the PP. The idealized pressure curve can be seen. The second peak is a reflection that occurs within the SWG. Figure 2 (b) shows the pressure measured by the BEMDs. It can be seen that both pressure curves correspond approximately to the idealized pressure curve. This is remarkable because the chest sensor was facing forward and should have a dynamic pressure component caused by the movement of the gas [5]. However, the pressure curves in Figure 2 (b) show the idealized pressure curve that should occur with a side-on overpressure measurement in the undisturbed free field. Therefore, it can be assumed that software modeling is used to generate an idealized pressure curve from the blended pressure curve that is intended to represent the overpressure that will occur. Figure 2 (c) shows the pressure curves of the ICP pressure sensors of the StEk system. It can be seen that the characteristics of the pressure curves were affected by the dynamic pressure component. The shoulder sensor, which, due to the nature of the dummy posture and position, was not exposed perfectly side-on, also showed a dynamic component. Calculations based on the peak overpressures of the PP confirm, that the reflected pressure was visible on the face-on chest sensor [5]. A limiting factor is that the sensor mounts and the dummy itself are subject to mechanical excitation, which probably explains the interference frequency seen in the pressure signal. The test results show the limitations of BEMDs for scientific investigations of weapon systems, as it is assumed that a high degree of modeling of the pressure curves takes place during post-processing. However, as the comparison of the BEMDs with the PP pressure curves shows, the pressure curve fit matches the PP pressure curve sufficiently well. This shows that a scientific measurement system such as StEk should be used initially to investigate and assess the load case from weapon systems or training scenarios in order to capture the real and complete characteristics of the load case. T2 - 8th International Forum on Blast Injury Countermeasures CY - Tokio, Japan DA - 07.05.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 AN - OPUS4-63318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Description of a measurement setup for LLB exposures in dynamic situations using high-resolution measurement technology N2 - In order to gain an understanding of the Low Level Blast (LLB) exposure of soldiers when using weapon systems, it is necessary to characterize these weapon systems with regard to their overpressure effect [1]. Carrying out static measurements of weapon systems in the rough terrain of firing ranges and training areas poses a challenge for sensitive measurement technology. Furthermore, soldiers are often exposed to LLB in dynamic situations [2]. Therefore, commercially available blast gauges are often used, which, however, are not sufficient for high-resolution measurement of overpressure exposures with academic requirements due to their intended use [3]. Static measurement setups, such as with penile probes, must be used to characterize weapon systems, but they cannot make valid statements about the real load on dynamically behaving soldiers. However, this real load on the soldier is essential in order to be able to adequately assess the potential resulting medical effects. As part of this challenging measurement task, a prototype of a self-sufficient, high-resolution measurement system is presented, which can be used by an operator in dynamic situations without interference. The complete measuring chain was realized as a self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the measuring card (see Fig. 1, left). The measuring computer is attached to the front of the backpack to allow quick access. The measuring system is capable of recording four channels with a sampling rate of up to 2 MHz. Piezoelectric integrated charge pressure sensors are used as a high-resolution pressure sensor (type: PCB138B32). The pressure sensor is placed on a XX- carrier plates with the dimensions XY × YY. The pressure sensors are attached at the typical positions for Blast-Gauges measurements, like on the left shoulder, on the upper chest and on the back of the head. At the same time, commercial blast gauges are placed at the positions of the pressure sensors to qualify the blast gauges (type: B3 Blast Gauges Gen 6). The measuring system is referred to as a “Sensor Carrier Operator (StEk)”. As part of the functional testing of the measurement system, tests are carried out with hand weapons. For this purpose, a soldier is equipped with the StEk and blast gauges. The handguns used are the pistole P8 (caliber 9 mm) and the long rifle G36 (caliber 5.56 mm). The firing position is standing freehand. In addition, the soldier carried out an examination of the carrying comfort of the StEk as part of the training. Furthermore, it was evaluated whether the measuring chain was adequately integrated into the measuring system. The quality of the pressure measurement was also examined, whereby a direct comparison was made with the blast gauges (see Fig. 1 right). The measurement system presented here enables the combined (static and dynamic) scientific characterization of weapon systems, particularly with regard to overpressure loading. T2 - Research Specialist Meeting HFM 371 (NATO STO) CY - Toronto, Canada DA - 09.04.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 AN - OPUS4-63323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Investigation of Shock Wave Propagation in Soft Tissue Simulants: An Analysis of Organic Gelatin and Synthetic Gel N2 - This study investigates the effects of shock waves on soft tissue simulants, focusing on organic gelatin and a synthetic gel. Although extensive research has focused on the mechanical properties of soft tissue simulants, their behavior under shock wave conditions, such as those caused by blasts, is less understood. As explosives are increasingly used in modern combat scenarios, it is essential to study how shock waves interact with soft tissue. This knowledge is crucial for improving protective equipment and evaluating blast effects on the human body. A two-phase methodology was applied: First, organic gelatin production and synthetic gel composition were analyzed, identifying uncertainties and measuring sound speeds at varying temperatures to align with human tissue properties. Second, simulants were subjected to free-field shock waves, and embedded pressure sensors captured wave propagation, peak overpressures, and propagation velocity. Findings provide comparative insights into shock wave responses of simulants, offering a foundation for future experimental setups. T2 - 34th International Symposium on Ballistics CY - Jacksonville, FL, USA DA - 19.05.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Druckwelle PY - 2025 AN - OPUS4-63321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Grasse, Dennis A1 - Seeber, H. T1 - Mild Traumatic Brain Injury - Current Research Works in the Field of Primary Blast Injury N2 - In this presentation, the team security research of division 2.1 informs about current research efforts in the field of traumatic brain injury. The focus lies on the consequences of low-level blast on the human brain. Also the general research approaches of the team for the investigation of the behaviour of shock waves within human tissues are presented. T2 - ATLAS ENTRY Seminar CY - Göppingen, Germany DA - 21.08.2023 KW - LLB KW - Blast KW - mTBI KW - Primary blast injury KW - Traumatic brain injury PY - 2023 AN - OPUS4-58130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik A1 - Grobert, Steffen T1 - Investigation of intracorporeal shock wave propagation using a simplified torso model and a shock wave generator N2 - Blast injuries are among the most common injuries in military operations. Also, in civilian environments, more explosive threats are expected in the future due to emerging conflicts and threats. While the effect of fragments, which is classified as secondary blast injury, could be minimized by police and military personnel’s modern ballistic body protection systems, the effects of shock wave propagation in the body as part of the primary explosion trauma still remain a serious threat needing further research. The detonation-physical processes of highly dynamic pressure changes within the human body, the reflection-related amplification of shock waves at organ-dermis interfaces, and the consequences of injury mechanisms have become more prominent in international research. Various approaches have been used to investigate these aspects. Animal experiments on free field test sites or shock tube setups combined with a subsequent biological evaluation and numerical simulations provided promising results and allowed the discussion of different biomechanical aspects. However, due to poor reproducibility and a lack of short-term dynamic material properties, most research approaches have significant limitations. Laboratory test setups do not represent real-scale high explosive detonation parameters with regards to pressure characteristics, impulse duration and blockage problems. Measured values are interpreted with partly outdated, selective and not validated limit values for overpressures from field tests with animals. This is due to the lack of a validated and comprehensive data set covering a variation of the crucial parameter. Injury mechanisms and their effects have not yet been sufficiently elucidated for the torso and extremities. In order to contribute to the research efforts on the primary explosion effects, the German Federal Armed Forces established an interdisciplinary military medical research project in cooperation of the Bundeswehr Hospital Berlin and the German Federal Institute for Materials Research and Testing (BAM). The aim of the planned investigation is the development of a multidisciplinary method to investigate shock wave behavior in various generic tissue simulants under the most reproducible conditions possible with realistic loads in an experimental test series with short set-up times. T2 - 7th International Forum on Blast Injury Countermeasures CY - Tokio, Japan DA - 17.05.2023 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Experimental setup PY - 2023 AN - OPUS4-60045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grobert, S. T1 - Development of a body model and a shock wave generator for the analysis of intracorporeal shock wave propagations after explosions N2 - Im Rahmen dieses Vortrags wurden die ersten Ergebnisse des Sonderforschungsprojektes " Entwicklung und Validierung eines Körpermodells und eines Stoßwellengenerators zur Simulation der intrakorporalen Stoßwellenausbreitung nach Explosionen", welches in Zusammenarbeit zwischen dem Bundeswehrkrankenhaus Berlin und der BAM durchgeführt wird, vorgestellt. Der Versuchsaufbau (Stoßwellengenerator) und die verwendete Sensorik werden dargestelt, sowie eine vergeichende Studie zu den Protypen der Körpermodellen und Simulanzien. T2 - Kick-off-Workshops der NATO-Gruppe HFM 338 "Development of military loading exposure guidelines for prevention of chronic traumatic encephalopathy" CY - Online meeting DA - 18.05.2021 KW - Auswirkungsbetrachtungen KW - Blast KW - Explosionsverletzung PY - 2021 AN - OPUS4-53540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, Thomas A1 - Máca, Petr A1 - Hering, Marcus A1 - Fiedler, Georg A1 - Beckmann, Birgit T1 - Impact Experiments on Reinforced Concrete Specimens - Investigation of Repeatability and Scaling N2 - Nowadays, the impact resistance of concrete structures has become a prominent concern for critical infrastructure operators, particularly amidst escalating geopolitical tensions. Regulators and design engineers know that reinforced concrete structures can only be developed with high efficiency by considering nonlinear structural and highly nonlinear material behavior. Therefore, specific guidelines on impact design provide instructions for design and analysis of structures required to resist impact loading. These instructions are usually based on published results and evaluated data of impact experiments carried out in laboratories. To widen the knowledge and increase the scientific data the Institute of Concrete Structures (IMB) at TUD Dresden University of Technology (TUD) has carried out many impact experiments on reinforced concrete specimens in recent years. A specially designed drop tower is available for this purpose on the premises of the Otto Mohr Laboratory, TUD. In the framework of the past research at TUD some important issues, such as influence of rebar arrangement, structural thickness, scalability of specimen and repeatability, with regard to experimental impact testing were investigated. This article presents the drop tower facility and research results of impact experiments on reinforced concrete slabs. First, the scalability of impact experiments will be discussed in conjunction with already known theoretical scaling parameters provided by researchers in the past, e.g. Rüdiger et al. [1]. Scalability of experimental data is of huge importance since protective structures made of reinforced concrete differ usually in size in comparison to experimental specimens. The second important research focus is on repeatably of impact experiments. Since impact experiments are usually time consuming and expensive, a certain impact scenario is mostly carried out only once. It is intended to show the range of deviation of impact tests on some already carried out experiments on reinforced concrete slabs. A possible standard deviation is estimated for the applied test setup. T2 - 15th International Conference on Shock & Impact Loads on Structures CY - Gothenburg, Sweden DA - 12.06.2025 KW - Reinforced concrete KW - Drop-weight impact KW - Scaling KW - Repeatability KW - Digital image correlation PY - 2025 SP - 80 EP - 91 AN - OPUS4-63627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bell, Jérémy T1 - Embedded sensor for the detection of TNT in surface and marine waters N2 - In 1945, the Potsdam Conference led to the decision to destroy a significant amount of ammunition from the warring parties of WWII. Dumping was considered the cheapest, quickest, and safest solution to dispose of unused ammunition. However, thin barrels or containers often leak after 50 years, allowing explosives to escape into the marine environment. As the effects of weapons chemicals on ecosystems are well-documented, it is becoming increasingly important to detect, recover and dispose of old ammunition. Physical techniques such as magnetometry and sonar are used to detect ammunition in the sea, but they do not provide chemical information. Detecting leaking organic contaminants like TNT or other explosives in water or soil requires high-end laboratory equipment like HPLC or GC-MS, making remote water testing virtually impossible. As an alternative, a miniaturized method for the selective and sensitive indication of TNT using fluorescence light-up sensing was developed. The visual identification of TNT with a nucleophile that forms a strongly absorbing charge transfer complex (CTC) is a well-known method. This CTC is formed by the attraction of an electron from the donor molecule by the electron-deficient aromatic ring. In this work, a TNT-based CTC was selectively formed by the addition of tetraoctylammonium acetate in N,N-diethylformamide and, as expected, showed strong absorption. Surprisingly, at room temperature, the CTC can be converted into a fluorescent product with an emission band centred at 577 nm. For the detection of TNT in water, a microfluidic chip made of polydimethylsiloxane (PDMS) is used for both the extraction and reaction steps. In addition to miniaturising the experimental steps, the optical system (fluorometer) has been integrated into an autonomous smartphone assembly capable of catalysing the photoreaction and analysing the fluorescence response. Taking advantage of the light-up response, TNT was still easily detectable down to 9.4 ng with the CMOS camera. Further evaluation of this analytical tool consisted of analyses of unfiltered and untreated surface water samples spiked directly with increasing concentrations of TNT to reflect different levels of contamination. LODs of 21 and 40 ng were found for samples from the Teltow Canal in Berlin (DEU) and the Baltic Sea near Greifswald (DEU). Such an analytical tool could be used to monitor water quality in the field, as the release of organic pollutants from munitions into surface and marine waters will become increasingly problematic and concentrations will continue to rise over the coming decades. T2 - ANAKON 2025 CY - Leipzig, Germany DA - 10.03.2025 KW - Explosives KW - Microfluidics KW - Smartphone KW - Sprengstoffe KW - Mikrofluidik KW - Sensor PY - 2025 AN - OPUS4-62767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Empowering test strips for rapid, highly sensitive and multiplexed analysis of small molecule analytes at a point-of-need N2 - In particular, the rapid development of lateral flow assays as indispensable tools for everyone to contain the SARS-CoV-2 pandemic has fuelled the global demand for analytical tests that can be used outside dedicated laboratories. In addition to their use in medical diagnostics, rapid tests and assays have become increasingly important in various fields such as food safety, security, forensics, and environmental management. The advantage is obvious: taking the assay directly to the sample minimizes the time between suspicion and decision-making, allowing faster action. Especially today, when mobile communication devices with powerful computing capabilities and built-in cameras are ubiquitous, more people than ever before around the world have the basic skills to operate a powerful detector at their fingertips. This sets the stage for a much wider use of analytical measurements in terms of prognosis and prevention, enabling professional laypersons in particular. However, current strip-based systems are primarily focused on single parameter analysis, whether it is SARS-CoV-2 biomarkers, blood glucose levels, or lead concentrations in water samples. Industrial applications of such methods also often still rely on single-parameter assays, requiring multiple runs even for a limited number of key parameters. Overcoming these limitations depends on developing low-number multiplexing strategies that ensure robustness, reliability, speed, ease of use, and sensitivity. This lecture will give an overview of several generic approaches developed in recent years to address these challenges. It will highlight how the synergy of supramolecular (bio)chemistry, luminescence detection, hybrid (nano)materials and device miniaturization can result in powerful (bio)analytical assays that can be used at a point-of-need.1-5 Selected examples will introduce key aspects of such systems that include tailored signaling mechanisms and recognition elements, materials functionalization and device integration, including hybrid nanomaterials, gated indicator release systems, strip modification, and smartphone-based analysis. T2 - 15th Rapid Methods Europe Conference CY - Amsterdam, Netherlands DA - 06.11.2023 KW - Test strips KW - Lateral flow assays KW - Explosives KW - Pesticides KW - Rapid testing KW - Multiplexing PY - 2023 AN - OPUS4-58816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa A1 - Rurack, Knut T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection. T2 - 2023 IEEE SENSORS Conference CY - Vienna, Austria DA - 29.10.2023 KW - Lab-on-a-Chip KW - Nerve agents KW - Hand-held KW - Fluorescence KW - Toxic industrial chemicals PY - 2023 UR - https://ieeexplore.ieee.org/document/10325263 SN - 979-8-3503-0387-2 DO - https://doi.org/10.1109/SENSORS56945.2023.10325263 SP - 1 EP - 4 PB - IEEE CY - New York AN - OPUS4-59367 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bell, Jérémy A1 - Biyikal, Mustafa A1 - Rurack, Knut T1 - Embedded sensor based on tandem smartphone-microfluidic device for the detection of TNT in surface and sea waters N2 - The globe's seas were used as dumping ground after the world wars and those millions of ammunition, most of all containing 2,4,6-trinitrotoluene (TNT), represent a pressing danger for fishermen, dredging operations, submarine cable installations and tourism. We developed an extremely selective indication method for TNT based on a specific reaction that produces a highly fluorescent compound. The indication system was integrated into a microfluidic PDMS chip for the solid-liquid extraction of TNT from water samples, offering environmental monitoring possibilities. Combining the advantages of a light-up indicator, microfluidics and a smartphone as detector, the embedded sensor allows for the remote and rapid detection of TNT down to ng in surface and sea waters. T2 - µTAS 2020 CY - Online meeting DA - 05.10.2020 KW - Smartphone KW - Rapid test KW - TNT KW - Ammunition KW - Schnelltest KW - Munition PY - 2020 AN - OPUS4-51444 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection. T2 - IEEE Sensors Conference CY - Vienna, Austria DA - 29.10.2023 KW - Chemical warfare agents KW - Lab-on-a-chip KW - Handheld sensors KW - Toxic industrial chemicals KW - Fluorescence PY - 2023 AN - OPUS4-58815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pauli, Jutta A1 - Ramírez, A. A1 - Crasselt, C. A1 - Schmidt, W. A1 - Resch-Genger, Ute T1 - Utilizing optical spectroscopy and 2',7'-difluorofluorescein to characterize the early stages of cement hydration N2 - The increasingly sophisticated nature of modern, more environmentally friendly cementitious binders requires a better understanding and control particularly of the complex, dynamic processes involved in the early phase of cement hydration. In-situ monitoring of properties of a constantly changing system over a defined period of time calls for simple, sensitive, fast, and preferably also non-invasive methods like optical spectroscopy KW - Flourescence KW - Optical probe KW - Sensor KW - Dye KW - Flourescin KW - Photophysics KW - PH KW - Quantum yield KW - Quality assurance KW - Mechanism KW - Cement KW - Concrete KW - Building material KW - Hydration KW - Process monitoring PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537176 DO - https://doi.org/10.1088/2050-6120/ac2da0 SN - 2050-6120 VL - 10 IS - 1 SP - 2 EP - 13 PB - IOP Science AN - OPUS4-53717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Assessment of the Application of Scaling Concepts for Blast Effects Analysis N2 - Blast testing finds its implementation in several applications, e.g. for the purpose of investigation into accidental or intentional explosions, or for an assessment of the level of protection provided by a certain structural configuration. Analytical and/or semi-empirical methods are generally limited to preliminary assessments prior to blast testing. Applications of numerical simulations with hydrocodes coupled with finite element methods (FEM) can only reduce the amount of blast testing required, as these necessitate fulfillment of the fundamental prerequisites of model verification and that of model validation. Field tests are implemented for contact detonations as well as near-field blast scenarios and shock tube tests for far-field blast scenarios. However, these can be extremely resource intensive. Reliable small-scale experiments are a promising alternative. The concepts of dimensional analysis and similarity based on Buckingham’s Π-theorem (1914) have been applied in different fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited. The lack of even the most basic guidelines (far from any ‘standardized scaling methods’ for blast tests) show that scaling as a method is not yet established in blast effects analysis. In this preliminary study, we present a systematic approach and evaluation of scaling of blast effects analysis for RC slabs in order to develop guidelines for resource efficient testing methods. We study the blast scenario at two different scales. The focus of these investigations has been on evaluation of scaling of dynamics using pressure sensors, acceleration sensors and fiber optic sensing cables for distributed acoustic sensing (DAS). Further, the resulting plastic behavior upon blast is characterized by distributed strain sensing (DSS) along the same cables. T2 - 27th International Symposium on Military Aspects of Blast and Shock (MABS27) CY - Colmar, France DA - 06.10.2025 KW - Blast KW - RC-slabs KW - Similarity and scaling PY - 2025 AN - OPUS4-64616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit A1 - Costard, Rene A1 - Hering, Marcus A1 - Chruscicki, Sebastian A1 - Hicke, Konstantin A1 - Hüsken, Götz T1 - Assessment of the Application of Scaling Concepts for Blast Effects Analysis N2 - Blast testing finds its implementation in several applications, e.g. for the purpose of investigation into accidental or intentional explosions, or for an assessment of the level of protection provided by a certain structural configuration. Analytical and/or semi-empirical methods are generally limited to preliminary assessments prior to blast testing. Applications of numerical simulations with hydrocodes coupled with finite element methods (FEM) can only reduce the amount of blast testing required, as these necessitate fulfillment of the fundamental prerequisites of model verification and that of model validation. Field tests are implemented for contact detonations as well as near-field blast scenarios and shock tube tests for far-field blast scenarios. However, these can be extremely resource intensive. Reliable small-scale experiments are a promising alternative. The concepts of dimensional analysis and similarity based on Buckingham’s Π-theorem (1914) have been applied in different fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited. The lack of even the most basic guidelines (far from any ‘standardized scaling methods’ for blast tests) show that scaling as a method is not yet established in blast effects analysis. In this preliminary study, we present a systematic approach and evaluation of scaling of blast effects analysis for RC slabs in order to develop guidelines for resource efficient testing methods. We study the blast scenario at two different scales. The focus of these investigations has been on evaluation of scaling of dynamics using pressure sensors, acceleration sensors and fiber optic sensing cables for distributed acoustic sensing (DAS). Further, the resulting plastic behavior upon blast is characterized by distributed strain sensing (DSS) along the same cables. T2 - 27th International Symposium on Military Aspects of Blast and Shock (MABS27) CY - Colmar, France DA - 06.10.2025 KW - Similarity and scaling KW - Blast KW - RC-slabs PY - 2025 SP - 1 EP - 11 AN - OPUS4-64617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krenek, S. A1 - Eisermann, R. A1 - Failleau, G. A1 - Lu, Xin A1 - Thomas, P. A1 - Kjeldsen, H. A1 - Anhalt, K. T1 - Fibre-optic thermometry to support the clean energy transition N2 - The measurement and control of temperature plays a key role in achieving the European Green Deal targets for a low carbon energy system. Fibre-optic thermometry is an emerging technology that can improve temperature measurement in extreme environments for energy providers and industry due to its distributed sensing and immunity to electromagnetic fields. Various applications for optimisation and monitoring in the energy sector are described, covering the whole range from energy generation to transmission and consumption. However, fibre-optic thermometers have cross sensitivities to other quantities (e.g., strain and humidity) and ageing effects that need to be investigated, quantified and minimised to obtain traceable and reliable measurements. This is particularly important so that applications in critical infrastructure can benefit from future measurements that are not possible with conventional sensors. The European INFOTherm project aims to overcome the limitations that currently prevent the widespread use of fibre-optic thermometry by creating a dedicated European metrology infrastructure for research, development and calibration. First results on measurement uncertainty, improvement of measurement techniques and practical field tests are presented. KW - Industrial processes optimisation KW - Fibre-optic thermometry KW - Distributed temperature sensing KW - Traceability KW - Thermal energy storage KW - Electrical grid resilience PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640075 DO - https://doi.org/10.1515/teme-2025-0044 SN - 2196-7113 VL - 92 IS - 9-10 SP - 392 EP - 405 PB - De Gruyter Brill AN - OPUS4-64007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liao, Chun-Man T1 - Assessment of prestress loss in a large-scale concrete bridge model under outdoor condition N2 - The presentation shows that subtle variations in coda wave velocity can capture minor temperature effects, offering a good understanding of how a outdoor prestressed concrete structure responds to environmental conditions over time. Ultimately, this work contributes to development of more comprehensive and resilient structural health monitoring strategies for prestressed concrete infrastructure. T2 - EVACES 2025 CY - Porto, Portugal DA - 02.07.2025 KW - Coda wave interferometry KW - Damage detection KW - Prestress loss KW - Seismic interferometry KW - Structural health monitoring PY - 2025 AN - OPUS4-64211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a Handheld Device for the Trace Detection of Explosives N2 - With the help of the EXIST research transfer the startup True Detection System (TDS) will develop a portable and easy-to-use handheld device based on chemical-optical sensors that can detect the smallest traces of various explosives and markers (e.g. TNT, C4, ANFO, TATP, DMDNB, etc.) and pure salts (e.g. potassium nitrate) reliably and without major cross-sensitivities. The device has been developed over the last 10 years at the Federal Institute for Material Research and Testing (BAM) in cooperation with an SME. Within the next 18 months, a laboratory prototype will now be converted into a commercial device. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2023 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Start-up PY - 2023 AN - OPUS4-58541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a handheld device for the trace detection of explosives N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2024 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Fluorescence PY - 2024 AN - OPUS4-61433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - Gradient-enhanced models in blast simulations of concrete structures N2 - Blast experiments on reinforced concrete structures are often limited to small structures and therefore simple shock waves. Such experiments are carried out at the Bundesanstalt für Materialforschung und -prüfung (BAM) and the structural response is investigated using several measuring methods. Complex load scenarios that occur as a result of reflection of the shock wave in larger structures are harder to realize in practice. Numerical simulations for the propagation of the shock wave and the structural response can therefore be an alternative method for the investigation of blast loads on complex structures. For the simulation of concrete under impact and blast loads, several local constitutive models exist that are formulated as plasticity models with softening taken into account by introducing a scalar damage field. Local damage models however often lead to mesh-dependent results which do not converge with mesh refinement. In order to achieve meaningful predictions from numerical experiments, independence from the mesh is needed. In this contribution, the Johnson-Holmquist model (JH2) for brittle damage [2] has been implemented for the free open source software FEniCSx and is investigated in a high strain rate benchmark simulation. Mesh-convergence analyses show that displacements as well as the dissipated plastic energy do not converge with mesh-refinement. Following the gradient-enhancement approach by [1], a gradient-enhanced JH2 model which can be efficiently solved with explicit solvers is introduced and its advantages over the local models are discussed. Since many damage models for concrete share the damage mechanism of the JH2 model, the application of the regularization methods to more complex material models, like the RHT model [3], is also discussed. Advantages of a gradient-enhanced formulation to simulate dynamic strength increase of concrete, as suggested in [1], is discussed as well. T2 - ECCOMAS CONGRESS 2024 CY - Lisbon, Portugal DA - 03.06.2024 KW - Concrete Modeling KW - Explicit Dynamics KW - Gradient-Damage KW - Mesh Convergence PY - 2024 AN - OPUS4-64613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - Gradient-Enhanced Plasticity In Explicit Dynamics N2 - The simulation of concrete under impact and blast loads often relies on local constitutive models, typically formulated as plasticity models that incorporate softening through a scalar damage field. However, these local damage models frequently exhibit mesh-dependent results that fail to converge with mesh refinement. In earlier work, the mesh-dependency of a modified Johnson-Holmquist (JH2) model was effectively mitigated through a gradient-enhanced plasticity formulation in explicit dynamics [1]. The gradient-enhancement method for explicit dynamics, originally introduced in [3], involves modifying Peerlings' additional partial differential equation [2] for nonlocal equivalent plastic strain by incorporating inertia. This modification enables the use of explicit solvers, such as the central difference method. Despite these advancements, the model continues to face challenges, particularly slow convergence rates with mesh refinement, which are difficult to analyze due to the JH2 model's complexity. To address these challenges, this study investigates simpler plasticity models, such as von Mises plasticity and Drucker-Prager plasticity, combined with a nonlocal softening term. By systematically incorporating key characteristics of the JH2 model—namely, pressure-dependent yield surfaces, softening, residual yield strength at full damage and a nonlinear volumetric stress responses via an equation of state (EOS)—this work aims to further refine the gradient-enhanced JH2 model and extend these improvements to more complex plasticity models like the RHT model. T2 - GACM 2025 CY - Braunschweig, Germany DA - 21.09.2025 KW - Gradient-enhancement KW - Plasticity KW - Concrete modeling KW - Mesh Convergence PY - 2025 AN - OPUS4-64615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - A gradient-enhanced JH2 model for dynamic simulations of concrete structures N2 - Concrete structures subjected to impact and blast loads experience complex failure mechanisms that are challenging to simulate accurately. Local constitutive models formulated using plasticity with softening are commonly used for this purpose. The softening behavior is typically represented by a scalar damage field, which scales the yield surface to capture the degradation of material strength. However, these local models often exhibit meshdependent results with localization of damage into a few cells. To address this limitation, this study combines a modified version of the Johnson-Holmquist (JH2) model with a gradientenhancement approach. The introduction of an inertia term into the additional PDE for the determination of the nonlocal equivalent plastic strain transforms it into a hyperbolic equation, enabling an efficient solution with an explicit dynamics solver. A one-dimensional benchmark simulation demonstrates the differences between the local and gradient-enhanced models. The local model shows severe damage localization and diminishing plastic energy dissipation with finer meshes. In contrast, the gradient-enhanced model distributes damage over multiple elements, though the plastic strain still localizes within a single element. Introducing strain hardening with respect to the local equivalent plastic strain resolves this issue, ensuring convergence of plastic energy and non-localizing plastic strain. These findings are extended and validated with two-dimensional simulations, showcasing the model’s practical relevance. Additionally, the impact of the added inertia term is analyzed in the context of dynamic strength enhancement, a critical characteristic of concrete under high strain rates. The proposed gradient-enhancement approach demonstrates improved numerical stability and mesh-independence compared to local models, making it a suitable tool for simulating concrete behavior under extreme loading conditions. T2 - GAMM 2025 CY - Posen, Poland DA - 07.04.2025 KW - Gradient-enhancement KW - Explicit dynamics KW - High strain rate KW - Concrete modelling PY - 2025 AN - OPUS4-64614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klaus, Christian A1 - Soruco Aloisio, Ricardo A1 - Koch, Claudia A1 - Prellwitz, Matthias T1 - Towards Safety and Accuracy of Hydrogen Refuelling Stations through Digital Twins N2 - This paper presents digital quality infrastructure methods for hydrogen refueling stations using the Asset Administration Shell as a standardized digital twin. Implemented at BAM’s test platform, it integrates real-time sensor data, calibration certificates, and compliance documents to support traceable, interoperable asset management. In combination with AI and semantic tools, the system will enable predictive maintenance, remote audits, and improved safety. This approach reduces downtime, enhances transparency, and offers a scalable model demonstrating the potential of digital twins in advancing metrological traceability and operational efficiency in hydrogen technologies. T2 - IMEKO TC-6 International Conference on Metrology and Digital Transformation - M4DConf 2025 CY - Benevento, Italy DA - 03.09.2025 KW - Datenintregration KW - IT KW - Verwaltungsschale KW - Infrastruktur KW - OT KW - Open Source KW - Software PY - 2025 UR - https://www.m4dconf.org/ UR - https://www.sciencedirect.com/journal/measurement-digitalization SP - 1 EP - 6 AN - OPUS4-64951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU Projekt ODYSSEUS – Home-made explosives and Precursor N2 - Fighting terrorism requires an arsenal of tools. One of these is knowledge about explosive precursors – chemical substances that can be used for legitimate purposes, but can also be misused for the illicit manufacture of home-made explosives. In this context, the EU-funded ODYSSEUS project will develop effective and efficient prognostic, detection and forensic tools to improve prevention, countering and investigation of terrorist incidents involving home-made explosives. The knowledge will help in the development of tools for monitoring the chemical supply chain and sensing in (near) real-time explosive precursors. The tools will be field-tested in three operational use cases. T2 - 46. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 25.04.2026 KW - Home-made explosives KW - Terror attacks KW - Precursor PY - 2025 AN - OPUS4-62999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU project ODYSSEUS – year 3 Final presentation N2 - Presentation of main results of the R&D project ODYSSEUS regarding home-made explosives. T2 - 24. Internationales Symposium des Bundeskriminalamtes für Sprengstoffermittelnde und Entschärfende unkonventioneller Spreng- und Brandvorrichtungen CY - Magdeburg, Germany DA - 25.11.2024 KW - Home-made explosives KW - Precurers KW - Terrorist attacks PY - 2024 AN - OPUS4-61837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Stewart, M. G. T1 - On the cost-efficiency, significance and effectiveness of terrorism risk reduction strategies for buildings N2 - We analyse the performance of risk reduction strategies for Terrorist attacks with Improvised Explosive Devices (IEDs) for large governmental building structures in terms of cost-efficiency, significance and effectiveness Accounting for life safety in conjunction with societal preferences and capabilities. The approach builds upon an extended Bayesian pre-posterior decision analysis and the principles of the marginal lifesaving costs based on the Life Quality Index (LQI). The decision scenario is formulated for a decision maker responsible for the safety of governmental or large commercial buildings and consequently the direct risks, the indirect risks due to fatalities and economical importance of the building beside the expected cost for the individual risk reduction strategies are modelled, aggregated and optimised. The considered risk reduction strategies encompass an explicit consideration and distinction of information and actions such as (i) threat surveillance may trigger the temporary evacuation of the building, (ii) the implementation of protection provisions provided by codes and guidelines, (iii) a detailed progressive collapse assessment and specific protection measures and (iv) the combination of protection and surveillance. All considered strategies are found to contribute to risk reduction and can be costefficient, especially for higher threat probabilities. The risk reduction strategies comply with societal macroeconomic and demographical characteristics and societal preferences according to the LQI. The progressive collapse assessment with targeted protection measures is found to be the most cost-efficient, significant and effective counter-terrorism strategy. This finding points to the necessity for a comprehensive utilisation of scientific methods and sophisticated engineering for progressive collapse assessment to determine targeted protection measures. KW - Significance and effectiveness KW - Risk mitigation strategies KW - Terrorist attacks KW - Value of information KW - Bayesian probability KW - Reliability KW - Risk and decision analysis KW - Decision optimality PY - 2020 DO - https://doi.org/10.1016/j.strusafe.2020.101957 VL - 85 SP - 10195 PB - Elsevier Ltd. AN - OPUS4-50794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Cozzolino, Chiara A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Safety Assessment of MLI Super-Insulation Systems for Cryogenic Liquid-Hydrogen Tanks in Fire Scenarios N2 - In the context of green energy transition, cryogenic tanks insulated by MLI and vacuum are emerging as a leading solution to store hydrogen in heavy-duty vehicles. However, the integrity of such tanks can be jeopardized by fire. In such a scenario, MLI materials degradation can occur, leaving the tank unprotected from the fire heat flux, with consequent rapid pressurization and a high risk of failure. This study presents a safety assessment of non-combustible MLI under fire exposure based on the estimation of the time to mechanical failure of the equipment. This is calculated through an innovative model that simulates the thermomechanical response of the tank, including the MLI thermal degradation and the pressure-relief valve (PRV) operation. The application to several case studies that consider a typical LH2 tank featuring a wide range of MLI configurations demonstrated the likelihood of failure in case of exposure to a hydrocarbon pool fire, providing also comprehensive insights into the impact of the insulation characteristics and operating conditions on the time to failure. T2 - Loss Prevention 2025 CY - Bologna, Italien DA - 09.06.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety KW - Tank PY - 2025 DO - https://doi.org/10.3303/CET25116036 SN - 2283-9216 IS - 116 SP - 211 EP - 216 PB - AIDIC AN - OPUS4-63739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar T1 - Experimental and Numerical Investigation on Multi-layer Insulation Thermal Deterioration N2 - To reduce carbon dioxide emissions, energy carries such as hydrogen consider to be a solution. Consumption of hydrogen as a fuel meets several restrictions such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquid phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Some studies have been revealed vulnerability of this type of insulation against high heat flux, for instance a fire accident. Some investigations have been depicted the importance of consideration of the MLI thermal degradation in terms of its reflective layer. However, limited number of studies have been focused on the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Moreover, the contribution of each individual spacer in all cases regarding the experimental temperature range is assessed to be around 8%. This value may increase to around 50% for glass paper and polyester spacers, and to around 25% for glass fleece spacers as the number of spacer layers increases up to six layers. To utilize the outcomes of the experiment later and integrate the results into numerical and CFD simulations, a model is proposed for the mentioned experimental temperature range up to 300°C to predict a heat flux attenuation factor. The model proposes a fitting factor that can reproduce the least square fitted line to the experimental data. T2 - 15th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions Naples (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - Heat Transfer KW - Hydrogen Storage PY - 2024 AN - OPUS4-60457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Davide, Camplese A1 - Giordano, Emrys Scarponi A1 - Valerio, Cozzani A1 - Frank, Otremba T1 - Experimental investigation on the behavior of thermal super insulation materials for cryogenic storage tanks in fire incidents N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks? The storage of cryogenic fuels requires tanks with Thermal Super Insulations (TSI) to keep the fluid cold and limit the formation of boil-off gas. TSI has proven itself in some applications since the middle of the 20th century, but in the land transport sector they are still quite new, where accidents involving fires, collisions, and their combination are to be expected. This work focuses on investigating the behavior of different types of TSI while exposed to a heat source representing a fire. To this aim, a High-Temperature Thermal Vacuum Chamber (HTTVC) was applied, which allows the thermal loading of a thermal insulation material in a vacuum and measuring the heat flow transported through the TSI in parallel. In this study, the results of 6 samples are presented regarding 3 types of MLI, rock wool, perlites, and microspheres. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as to a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for reducing the risks to people and infrastructures in the progressive establishment of tanks for cryogenic fluids in our industry and society. The data presented in the study can be used to improve the design of tanks and TSIs, the assessment of accident scenarios, and the development of measures for first responders. KW - Liquefied hydrogen KW - Liquefied natural gas KW - Tanks KW - Fire KW - Insulation KW - MLI KW - Perlite KW - Rock wool KW - Microspheres PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599947 DO - https://doi.org/10.1016/j.psep.2024.04.131 SN - 0957-5820 VL - 187 SP - 240 EP - 248 PB - Elsevier AN - OPUS4-59994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Cryogenic Storage Tanks In Fire Incidents N2 - The ongoing geo-political conflicts and the increasing need for the implementation of measures to improve the energetic system sustainability are increasing the importance of tanks for storing cryogenic fluids in the energy industry. The most common example of cryogenic tank applications is the transport of natural gas and hydrogen in their liquid form (LNG and LH2 respectively) for which, considering the same transport volume cryogenic storage ensures significantly higher transport capacities with respect storage based solely on overpressure. A common feature of all cryogenic transported fluids is that their condition must be maintained minimizing heat leaks from the environment as much as possible. This is achieved by the implementation of thermal super Insulations (TSI) systems based on e. g. rock wool, perlites, microspheres, multilayer insulations (MLI), and vacuum which have proven to be effective in applications. However, due to the relatively short period of use in some applications, the small number of documented incidents, and the still few investigations carried out in the field, the exploitation of such systems in the cryogenic fluids transport sector still suffers from insufficient knowledge about the course and consequences of incidents. Accidents involving collisions, fires, and their combination are quite common in the transportation sector and may generate extraordinary loads on the tank and its insulation system, eventually leading to tank failure. The present study focuses on the behavior of TSI systems in tanks when it is exposed to an external heat source representative of a hydrocarbon fire scenario. This may cause an increase of the heat flux into a tank by several orders of magnitude with respect to normal design conditions, thus inducing severe and in the TSI, causing the rapid release of flammable gas and even resulting in a Boiling Liquide Expanding Vapour Explosion (BLEVE). To study such scenarios a test rig was developed at BAM that allows testing of TSI at industrial conditions and enables subsequent analysis of TSI samples. This test rig considers the typical double-walled design of tanks for cryogenic fluids with vacuum and an additional insulating material in the interspace. Adjustable electrical heating elements simulate the fire on one side of the double wall. This process allows the implementation of repeatable heat loads of up to 100 kW/m². The other side of the double wall is represented by a fluid-supported heat exchanger, which allows the simulation of cold or cryogenic conditions in the test rig, and to determine the heat flux transmitted through the double wall. Thus, the test rig allows thermal loading and performance analysis of TSI samples at the same time. In the presentation, the results of diverse tested TSI systems will be presented and discussed. As a result of this study, the list of advantages and disadvantages for the choice of tested TSI expands. Within the test, all samples degraded as a consequence of a hydrocarbon fire-orientated thermal load. Strong differences in the behavior of the tested TSI systems over temperature, location, and time were observed. Additionally, the tested MLI insulations were significantly more resistant to their base materials. These results are relevant for the design, the definition of national and international regulations, the Risk assessment, and the development of safety concepts for cryogenic tanks. T2 - Cryogenic Storage Tanks CY - Munich, Germany DA - 18.04.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation PY - 2024 AN - OPUS4-59921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Storages For Cryogenic Gases And Their Safety Part 2 N2 - To accelerate the hydrogen uptake in Europe the project KICstartH2 funded by the European Union arranged the Joint European Summer School (JESS) that deals with several topics around hydrogen. A topic in this framework is the transport and storage of energy by hydrogen. Here cryogenic energy carriers are seen as having great potential. This is because they allow significantly higher volumetric energy densities to be achieved than when these energy carriers are stored at typical temperatures on Earth. This is important for numerous energy-intensive applications, such as those found in all transport sectors. Important cryogenic energy carriers include liquefied hydrogen (LH2) and liquefied natural gas (LNG). This presentation deals with the consequences of an accidental release of a cryogenic liquid and the consequences of a fire affecting a tank. T2 - Joint European Summer School (JESS) CY - Athens, Greece DA - 15.09.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank KW - Fire KW - Safety KW - Consequences PY - 2024 AN - OPUS4-61084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, D. A1 - Scarponi, G. E. A1 - Cozzani, V. A1 - Otremba, Frank T1 - Insulation Materials Used in Tanks for the Storage of Cryogenic Fluids in Fire Scenarios N2 - The importance of tanks for storing cryogenic fluids in the energy industry is increasing because of ongoing political conflicts and the implementation of more environmentally friendly energy sources. Key representatives for the application of cryogenic tanks are natural gas in the form of Liquefied Natural Gas (LNG) and hydrogen, e. g. in the form of Liquefied Hydrogen (LH2), for which significantly higher transport capacities can be achieved with the same transport volume using cryogenic storages than with storages based solely on overpressure. What applies to all cryogenic transported fluids in common is their condition that must be maintained. Hence heat flows into the preserved fluid must be minimized. Thermal super Insulations (TSI) based on e. g. multilayer insulations (MLI), perlites, and vacuum are utilized for this purpose and have already proven themselves in similar applications. However, for the use of tanks for cryogenic fluids in the transport sector, there is insufficient knowledge regarding the course and consequences of incidents, which is due to the still short period of use and the few documented incidents, hence few investigations carried out in this field. Typical scenarios in the transport sector represent car accidents with collisions, fires, and their combination, which are associated with extraordinary loads on the tank. The focus of this study is to investigate the behavior of TSI as a result of their thermal exposure to a heat source representing a fire. It is worth mentioning that this could lead to an increase of the heat flux into a tank by several orders of magnitude, and to permanent damage of the TSI, ultimately rapid release of flammable gas as well as a Boiling Liquide Expanding Vapour Explosion (BLEVE). For this purpose, a high temperature thermal vacuum chamber (HTTVC) has been developed that allows thermal loading of MLI or perlites in a vacuum and simultaneous measurement of heat flow through this TSI. The HTTVC is designed to represent realistic insulation conditions and to withstand thermal loads from typical design fires. The HTTVC was applied to investigate TSI based on MLI and vacuum. It is shown that the thermal stress caused permanent damage to the TSI, with shrinkage, phase change, pyrolysis, and condensation being significant damage mechanisms. The results are relevant for the evaluation of accident scenarios and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - ASME 2023 Pressure Vessels & Piping Conference (PVP2023) CY - Atlanta, Georgia, USA DA - 16.07.2023 KW - LH2 KW - LNG KW - Fire KW - MLI KW - Safety PY - 2023 AN - OPUS4-57974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scarponi, G. T1 - Modelling the response of LH2 tanks equipment with Multi Layer Insulation to fire exposure N2 - Hydrogen is among the most promising candidates to replace fossil fuels in the energy transition. Hydrogen-powered vehicles are already a reality, and their number is foreseen to increase considerably in the next decade. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) appear to be one of the most effective to ensure high volumetric energy density. A potential loss of integrity of this kind of storage equipment might lead to severe consequences due to high flammability of hydrogen. This might occur, for instance, as a consequence of the exposure to an external source of heat such as a fire following a car accident. Real scale fire test results suggest that the super insulating performance of MLI systems may undergo severe degradation when this is subjected to high temperature, leaving the tank almost unprotected and leading to failure in a relatively short time. Characterizing this kind of accident scenario is crucial to ensure a safe design of storage tanks for Hydrogen-powered vehicles. This presentation provides an overview of the ongoing research work on modelling MLI LH2 tanks exposed to fire. Lumped and computational fluid dynamic based models are presented, highlighting current gaps. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis case studies. T2 - H2-Kolloquium CY - Online meeting DA - 21.06.2023 KW - LH2 KW - Cold KW - MLI PY - 2023 AN - OPUS4-57878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Heßmann, Jennifer A1 - Werner, Jan A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Investigation of realistic fire scenarios involving cryogenic storage tanks N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks for instance from a BLEVE? A key to answer this question is to research representative fires by its characterization and its effect on the insulation. At BAM’s technical test side in Germany, a test series was started to answer this question among others. This paper presents results on a pool fire under a colorimeter, that simulates a tank. The investigation points out, that the full fire characterization approach allows to represent the fire. The findings are relevant for the investigation of a representative design fire that is applicable for the approval and improvement of tanks as well as to research accident scenarios and their consequences. T2 - 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - LH2 KW - Insulation KW - Fire KW - Liquefied Natural Gas KW - Safety PY - 2025 AN - OPUS4-63425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Experimental Research Of A Tank For A Cryogenic Fluid With a Wall Rupture In a Fire Scenario N2 - In the course of decarbonizing the energy industry, cryogenic energy carriers as liquefied hydrogen (LH2) and liquefied natural gas (LNG) are seen as having great potential. In technical applications, the challenge is to keep these energy carriers cold for a long time. This is achieved in the road transport sector and also stationary applications by thermal super insulations (TSI) which based on double-walled tanks with vacuum and multilayer insulation (MLI) in the interspace. This study focuses on the behaviour of widely used combustible MLI in a fire scenario, at vacuum and atmospheric pressure conditions. The former corresponds to the typical design condition and the latter to the condition after an outer hull rapture of a tank. Furthermore, two fire scenarios were taken into account: a standard-oriented approach and a hydrocarbon fire-oriented approach. For the study, a test rig was applied that allows testing of TSI at industrial conditions and subsequent analysis of TSI samples. The test rig allows thermal loading and performance analysis of TSI samples at the same time. Comparing the tests, the samples degraded differently. However, no sudden failure of the entire MLI was observed in any test. These results are relevant for the evaluation of incidents with tanks for the storage of cryogenic fluids and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - 15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE) CY - Neapel, Italy DA - 10.06.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank KW - Fire KW - Thermal insulation KW - Multi-Layer Insulation PY - 2024 AN - OPUS4-60456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank T1 - Systems with Cryogenic Liquefied Gases in Fire Incidents N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. The focus of this study is to investigate the behavior of different types of TSI when exposed to a heat source that represents a fire. Therefore, a High- Temperature Thermal Vacuum Chamber (HTTVC) was used that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this study, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for the evaluation of accident scenarios, the improvement of TSI, and the development of emergency measures. T2 - IMECE 2023 CY - New Orleans, Louisiana, USA DA - 29.10.2023 KW - LH2 KW - LNG KW - Fire PY - 2023 AN - OPUS4-58769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schiaroli, Alice A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Ustolin, Federico A1 - Cozzani, Valerio T1 - Modelling the behaviour of cryogenic liquid hydrogen tanks engulfed in fire N2 - The safe use of liquid hydrogen as a clean fuel requires a deep understanding of its behaviour in accident scenarios. Among other scenarios, the possible involvement of cryogenic liquid hydrogen tanks in engulfing fires is of particular concern, due to the potentially severe consequences. This study proposes a computational fluid dynamic model suitable to simulate the behaviour of liquid hydrogen tanks equipped with multi-layer insulation (MLI) engulfed in fire. An original approach has been developed to assess the progressive degradation of the performance of the thermal insulation, that is crucial in determining the tank pressurization and failure. The model is validated against full-scale experimental fire tests. The outcomes of the model reproduce the progressive pressurization and the opening time of the pressure relief valve within 2 % error. The results demonstrate the importance of accounting for the dynamic evolution of the progressive degradation of the insulation when evaluating tank pressurization, and they highlight the limitations of empirical, simplified state-of-the-art approaches. Furthermore, the analysis evidences the key role of the fire temperature in governing tank response, stressing the need for proper fire characterization to support reliable modelling of fire scenarios and the development of emergency planning and mitigation strategies ensuring the structural integrity of liquid hydrogen tanks during fire attacks. KW - LH2 KW - LNG KW - Fire KW - Tank PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652920 DO - https://doi.org/10.1016/j.psep.2025.108319 SN - 0957-5820 VL - 206 SP - 1 EP - 14 PB - Elsevier Ltd. AN - OPUS4-65292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Agasty, Amit A1 - Costard, Rene A1 - Kadoke, Daniel A1 - Kind, Thomas A1 - Hicke, Konstantin A1 - Hüsken, Götz T1 - A comprehensive experimental assessment of reinforced concrete walls under blast: In situ monitoring of loading, dynamic response and damage with NDT methods and embedded sensors N2 - A safety or security related assessment of explosions, accidental and intentional scenarios alike, often necessitate performance of resource intensive replication tests. For an efficient assessment without performing full scale blast tests, e.g., supported by numerical simulations, detailed knowledge is necessary to predict the blast loading from a given charge configuration, the resulting dynamic response of the structure under investigation as well as the resulting damage. Validation of numerical simulation requires the spatially resolved acquisition of all these parameters in real time. In this paper we present a set of measurement techniques and discuss their suitability for monitoring reinforced concrete (RC) walls under blast loading. Different blast-loading scenarios were realized by varying the charge weight and the standoff distance. The dynamic loading of the wall was characterized with pressure sensors complemented by numerical simulations using the APOLLO Blastsimulator and ConWep. High speed digital image correlation (DIC) was implemented in combination with multiple acceleration sensors to observe the dynamic deflection of the walls during the loading and to determine the residual deformation after the loading had ceased. In addition, one test specimen was instrumented with fiber optic sensor cables. These fiber optic sensors were used for distributed acoustic sensing (DAS) delivering information on dynamics of compression and tension cycles from within the structure. Additionally, the local damage pattern emerging during the series of blasts was determined via distributed fiber optic strain sensing (DSS) to enable the characterization of visual and non-visual damage to the structure. The obtained information was compared to results by an ultrasound structure-scanner. KW - Blast testing KW - Reinforced concrete KW - NDT methods KW - Fiber optic sensing KW - DIC KW - Numerical simulations KW - APOLLO Blastsimulator PY - 2025 DO - https://doi.org/10.1177/20414196251353795 SN - 2041-4196 SP - 1 EP - 31 PB - Sage Publications AN - OPUS4-63832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liao, Chun-Man A1 - Bernauer, F. A1 - Niederleithinger, Ernst A1 - Igel, H. A1 - Hadziioannou, C. T1 - Assessment of prestress loss in a large-scale concrete bridge model under outdoor condition N2 - Environmental conditions affect the accuracy of field measurements used to monitor civil structures. Previous studies have shown that measured dynamic responses often lack the sensitivity needed for effective localized damage detection. To address this issue, our study focuses on distinguishing environmental effects from damage related effects in measured data to enhance vibration-based damage identification methods. Experimentally, the problem of prestress loss in a prestressed concrete bridge model was examined. By adjusting the pre-stressing force in a large-scale concrete bridge model, cracking phenomena were observed. To demonstrate field monitoring of a large-scale prestressed structure, noise recording was performed and the measurement data was analyzed with operational modal analysis. Additionally, ultrasonic testing, known for its high sensitivity in damage localization, was used to cross-check the structural damage. Seismic and coda wave interferometry were also employed to estimate wave velocities, providing insights into the level of prestress loss and temperature sensitivity. Ultimately, these measurable wave properties help to overcome the uncertainties associated with traditional vibration-based damage detection methods. T2 - EVACES 2025 CY - Porto, Portugal DA - 02.07.2025 KW - Prestress Loss KW - NDT KW - Ambient Vibration KW - Ultrasonic Testing KW - Coda Wave Interferometry KW - Seismic Interferometry PY - 2025 SN - 978-3-031-96105-2 DO - https://doi.org/10.1007/978-3-031-96106-9_20 VL - 675 SP - 181 EP - 189 PB - Springer Nature CY - Cham AN - OPUS4-64212 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -