TY - CONF A1 - Denkler, Tilman T1 - Der digitale Produktpass für Bauprodukte N2 - Mit der im Januar 2025 in Kraft getretenen Bauproduktenverordnung (BauPVO) wurde auch ein digitaler Produktpass (DPP) für Bauprodukte neu etabliert. Dieser wird in den kommenden Jahren für alle Bauprodukte in Europa, die unter die neu geschaffene "harmonisierte Zone" fallen, verpflichtend werden. In dem Vortrag wird ein allgemeiner Überblick über Zweck und Funktionsweise des DPP nach BauPVO gegeben. Danach werden einzelne Aspekte wie Zeithorizont und Inhalt erläutert. T2 - 17. Symposium zur EU-Bauproduktenverordnung CY - Berlin, Germany DA - 30.10.2025 KW - Digitaler Produktpass KW - Bauproduktenverordnung KW - Ökodesignverordnung PY - 2025 AN - OPUS4-64542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sunder, S. A1 - Jauregui Rozo, Maria A1 - Deshpande, H. A1 - Neyer, A. A1 - Papaiya, V. A1 - Meinel, Dietmar A1 - Schartel, Bernhard A1 - Ruckdäschel, H. T1 - Char to the Rescue: Processing and Transfer of Flame-Retardant Epoxy Resins, Adjusting the Fire Behavior and Post-Fire Structural Integrity of Glass Fiber Composites N2 - Epoxy (EP) glass fiber reinforced composites (GFRCs) are extensively used in structural applications due to their excellent thermal and mechanical properties, but their inherent flammability limits fire-safe deployment. While numerous studies examine the flame retardancy of resins or individual composite systems, comprehensive studies evaluating simultaneous improvements in flame retardancy and post-fire mechanical integrity, specifically through prepreg processing, remain challenging. This study investigates the effectiveness and transferability of phosphorus-based flame retardant (FR) systems to diglycidyl ether of bisphenol A (DGEBA) and EP novolac resin matrices and their corresponding bidirectional glass fiber composites via prepregs. The FRs are chosen based on varying modes of action: ammonium polyphosphate with inorganic silicate (APP/InSi) primarily acts in the condensed phase (CP), and aluminum diethyl phosphinate with zinc hydroxystannate (AldietPO2/ZHS) is known to demonstrate both gas-phase (GP) and CP activity. Fire residues are tailored to compensate for structural defects from fire exposure. EP novolac, with higher aromaticity and cross-linking, possesses better inherent flame resistance compared to DGEBA. The novolac composites containing AldietPO2/ZHS simultaneously showed the highest retention of flexural properties after fire exposure and the best fire safety index. The experimental values of the post-fire flexural properties in the composites calibrated damage parameters in two theoretical models. KW - Composites KW - DGEBA KW - Epoxy novolac KW - Post-fire KW - Prepregs PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643752 DO - https://doi.org/10.1002/pol.20250692 SN - 2642-4169 SN - 2642-4150 VL - 63 IS - 20 SP - 4295 EP - 4309 PB - Wiley AN - OPUS4-64375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rockel, Daniel A1 - Sanchez Olivares, G. A1 - Calderas, F. A1 - Schartel, Bernhard T1 - Two heads are better than one: Aluminum trihydroxide / phosphorous flame retardant combination in natural waste fiber biocomposites N2 - Future polymeric materials that replace fossil fuel-based engineering plastics demand the use of renewable sources as well as the implementation of key properties such as flame retardancy, processing, and mechanical properties. This study focuses on the combination of aluminum trihydroxide (ATH) and phosphorus-based flame retardants in compositable thermoplastic starch reinforced with sustainable multifunctional leather waste fibers. The flame retardants engender different flame-retardant modes of action, improving overall performance when combined. The partial substitution of ATH with phosphorous flame retardant allowed a reduction in flame retardant loading. Materials with 90 phr of ATH reached a limiting oxygen index of 31.5 vol.-% and a UL-94 rating of V-1, whereas the combination of 73 phr ATH and 7 phr of diphenyl ocytyl phosphate achieved a V-0 rating and a slightly reduced peak of heat release rate. This study demonstrates the potential of multicomponent systems implementing waste fiber–reinforced biocomposites. KW - Biocomposites KW - Flame retardancy KW - Phosphorous flame retardants KW - Synergism KW - Sustainability PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639084 DO - https://doi.org/10.1016/j.polymertesting.2025.108938 SN - 0142-9418 SN - 1873-2348 VL - 150 SP - 1 EP - 17 PB - Elsevier Ltd. AN - OPUS4-63908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebs, N. A1 - Demleitner, M. A1 - Albuquerque, R.Q. A1 - Schartel, Bernhard A1 - Ruckdäschel, H. T1 - Bayesian Optimization of flame-retardant performance in a high-Tg epoxy resin system N2 - Polymeric materials are widely used due to their mechanical properties and cost-effectiveness, but their inherent flammability requires effective flame-retardant additives to meet safety standards. Optimizing multicomponent flame-retardant formulations is challenging due to the vast experimental space. This study applies Bayesian Optimization (BO) to optimize flame-retardant formulations in high glass transition temperature (Tg) epoxy resins. Aluminum diethyl phosphinate (AlPi) was systematically combined with three synergists: zinc stannate (ZnSt), a silicone-based additive (DowSil), and low-melting glass frits (Ceepree). BO-guided experimental design expanded from 16 initial formulations to a total of 28, minimizing the Maximum Average Rate of Heat Emission (MARHE) under the constraint of Total Smoke Production (TSP) < 17 m2 using the epsilon-constraint method. BO revealed non-linear synergistic interactions: ZnSt significantly reduced smoke production while AlPi effectively lowered heat release. The optimized formulation (BO7) achieved the lowest MARHE (122 kW/m2) while maintaining acceptable smoke levels, establishing a new Pareto front. The results demonstrate the effectiveness of BO in accelerating the development of synergistic, halogen-free flame-retardant polymer systems, offering a scalable and sustainable approach to polymer formulation design. KW - Machine learning KW - Epoxy resin KW - Bayesian optimization KW - Flame retardancy KW - Cone calorimeter PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-641070 DO - https://doi.org/10.1016/j.commatsci.2025.114210 SN - 0927-0256 SN - 1879-0801 VL - 260 SP - 1 EP - 9 PB - Elsevier AN - OPUS4-64107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neugum, Tim T1 - Application of the substructure method to assess the fire resistance of thermally restrained columns N2 - Usually, the fire resistance of load-bearing structural elements is determined by single members testing. A mechanical load is applied to the member in a force-controlled manner and is maintained constant throughout the fire test. After applying the mechanical load, the thermal exposure starts according to the ISO 834 fire curve. In this conventional test method, no interaction between the tested member and the entire building structure is considered. In buildings, the surrounding structure can restrain the thermal expansion of a member in case of fire. This may have both positive and negative effects on the fire resistance of this structural element. Several years ago, the Institute for Sustainability and Innovation in Structural Engineering (ISISE) at the University of Coimbra in Portugal and the Bundesanstalt für Materialforschung und prüfung (BAM) in Germany carried out fire tests on circular and square steel-reinforced concrete columns with restrained thermal expansion. BAM´s column test furnace allows the specimen to be subjected to thermal exposure and mechanical loading simultaneously. In addition, this device has a substructure test module, which can also provide restrained test conditions. In an ongoing research project at BAM and Technische Universität Braunschweig, the effect of restrained test conditions on the behaviour of steel-reinforced columns under fire exposure is further investigated. T2 - 8th International RILEM Workshop on Concrete Behaviour due to Fire Exposure CY - Krakow, Poland DA - 18.09.2025 KW - Substructure method KW - Surrounding structure KW - Fire resistance KW - Column KW - Concrete PY - 2025 AN - OPUS4-64584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neugum, Tim A1 - Stelzner, Ludwig A1 - Häßler, Dustin A1 - Zehfuß, Jochen A1 - Hothan, Sascha T1 - Application of the substructure method to assess the fire resistance of thermally restrained columns N2 - Usually, the fire resistance of load-bearing structural elements is determined by single members testing. A mechanical load is applied to the member in a force-controlled manner and is maintained constant throughout the fire test. After applying the mechanical load, the thermal exposure starts according to the ISO 834 fire curve. In this conventional test method, no interaction between the tested member and the entire building structure is considered. In buildings, the surrounding structure can restrain the thermal expansion of a member in case of fire. This may have both positive and negative effects on the fire resistance of this structural element. Several years ago, the Institute for Sustainability and Innovation in Structural Engineering (ISISE) at the University of Coimbra in Portugal and the Bundesanstalt für Materialforschung und prüfung (BAM) in Germany carried out fire tests on circular and square steel-reinforced concrete columns with restrained thermal expansion. BAM´s column test furnace allows the specimen to be subjected to thermal exposure and mechanical loading simultaneously. In addition, this device has a substructure test module, which can also provide restrained test conditions. In an ongoing research project at BAM and Technische Universität Braunschweig, the effect of restrained test conditions on the behaviour of steel-reinforced columns under fire exposure is further investigated. T2 - 8th International RILEM Workshop on Concrete Behaviour due to Fire Exposure CY - Krakow, Poland DA - 18.09.2025 KW - Substructure method KW - Surrounding structure KW - Fire resistance KW - Restrained columns KW - Concrete PY - 2025 SP - 1 EP - 2 AN - OPUS4-64582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Covi, Patrick A1 - Tondini, Nicola A1 - Korzen, Manfred A1 - Lamperti Tornaghi, Marco T1 - Hybrid fire following earthquake testing of a steel braced frame N2 - The paper presents the results of an experimental-numerical analysis aimed at investigating the performance of passive fire protections applied to steel columns under fires following earthquake (FFE) scenarios. In particular, five FFE tests on columns belonging to a steel braced frame were performed at the Bundesanstalt für Materialforschung und -prüfung (BAM, Federal Institute for Materials Research and Testing) by means of hybrid fire testing technique. In particular, an internal steel column of the ground floor belonging to a three-bay, four-storey concentrically braced steel building was tested, whilst the effect of the remainder of the structure was numerically simulated by means of an equivalent axial stiffness. Since the structure has a low degree of redundancy, the loss of a column can trigger global structural collapse. Two FFE tests were performed without any fire protection system and the other FFE tests were performed with three different fire protection solutions, i.e. conventional and seismic-resistant calcium silicate boards as well as vermiculite spray-based protection. Each column was firstly subjected to horizontal and vertical displacements resulting from seismic nonlinear time-history analysis performed on the numerical model of the case study. Then, the furnace was switched on and the ISO 834 standard fire curve was applied to the specimen. Numerical models were developed and calibrated on experimental data using different types of finite elements. The calibrated models with the presence of axial and rotational springs accurately captured the transition from pre- to post-buckling behavior. These findings highlight the importance of accurate modelling of the boundary conditions. Despite the fact, that seismic intensity was at life safety limit state, it was also found that the seismic damage of the fire protections was not high enough to hinder the fire performance of the fire protections. KW - Fire following earthquake KW - Concentrically braced steel frames KW - Fire protections KW - Numerical simulations KW - Experimental tests KW - Post-earthquake fire PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-645186 DO - https://doi.org/10.1016/j.conbuildmat.2025.143731 SN - 0950-0618 VL - 496 SP - 1 EP - 22 PB - Elsevier CY - Oxford AN - OPUS4-64518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chacon Castro, Jose P. A1 - Schartel, Bernhard T1 - Translating Flame Retardant Strategies: Analogy from Polyolefins and Bisphenol A polycarbonates to Poly(limonene carbonate) N2 - Poly(limonene carbonate)—PLimC—offers a novel sustainable alternative to traditional polymers, as it is derived from renewable limonene and carbon dioxide as monomers. Proposing PLimC as a future technical polymer for applications in electrical and electronic (E&E) devices, construction, and transportation, PLimC must meet specific fire prevention standards to be deemed suitable. Starting from the chemical structure of PLimC, strategies in analogy to flame retarded bisphenol A polycarbonates (PC), PC blends, and polyolefins (PO) are investigated to identify the most effective route to enhance the flame resistance of PLimC. This study utilized four halogen-free flame-retardant (FR) systems: APP + pentaerythritol (standard intumescent system in PO), a phosphorus flame retardant+PTFE as anti-dripping agent (used in PC blends), metal hydroxide ATH (widely used in PO), and potassium sulfonate salt (specific solution for PC). Applying these FRs at typical PC, PC blends, and PO loadings, we aim to understand their effect on PLimC and evaluated the different flame-retardant routes. Our experimental evaluations focused on the thermal properties, flammability, and fire behavior of each system. ATH emerged as the most effective, reducing the effective heat of combustion from 29.3 MJ kg⁻¹ to 18.6 MJ kg⁻¹ and the total heat evolved from 95 to 55 MJ m⁻². It also resulted in an increase in the limiting oxygen index from 17.1 to 26 vol.-% O2, along with a UL 94 HB40 rating. The intumescent system also exhibited considerable flame retardancy, highlighting the similarity of PLimC’s fire behavior to that of PO rather than PC KW - Poly(limonene carbonate) KW - Flame retardancy KW - Sustainability KW - Intumescent systems KW - Metal hydroxides KW - Sulfonate salts KW - Phosphorus flame retardants PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643257 DO - https://doi.org/10.1016/j.polymdegradstab.2025.111711 SN - 1873-2321 SN - 0141-3910 VL - 242 SP - 1 EP - 18 PB - Elsevier Ltd. AN - OPUS4-64325 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neugum, Tim A1 - Stelzner, Ludwig A1 - Häßler, Dustin A1 - Zehfuß, Jochen A1 - Hothan, Sascha T1 - Berücksichtigung der Tragwerksumgebung bei Brandversuchen an Stahlbetonstützen N2 - Das Tragwerk eines Gebäudes ist aus einzelnen Bauteilen zusammengesetzt. Insbesondere bei lokalen Brandereignissen bauen sich durch die Ausdehnung der vom Brand betroffenen Bauteile gegen das umgebende kältere Gesamttragwerk Zwangsbeanspruchungen auf. Bei konventionellen Brandprüfungen werden diese Zwangsbeanspruchungen in der Regel nicht berücksichtigt, da die Prüfsystematik auf Einzelbauteilprüfungen bei konstanter mechanischer Last ausgelegt ist. Die Prüfung komplexer, realmaßstäblicher Tragwerke ist oftmals nicht möglich. Die Interaktion des Einzelbauteils mit dem umgebenden Tragwerk kann sich sowohl positiv als auch negativ auf den Feuerwiderstand auswirken. Als nachteilig ist der thermische Zwang und die daraus resultierende Lasterhöhung zu nennen. Gleichzeitig kann eine Stauchung der Stütze zu einer Umlagerung von Kräften in das umgebende Tragwerk führen und damit den Versagenszeitpunkt der Stütze verzögern. Mit Hilfe der Substrukturtechnik kann das Verhalten einer Stütze im Brandfall unter Berücksichtigung der Interaktion mit dem umgebenden Tragwerk analysiert werden. In einem gemeinsamen DFG-Vorhaben der Bundesanstalt für Materialforschung und -prüfung (BAM) und dem Institut für Baustoffe, Massivbau und Brandschutz (iBMB) der TU Braunschweig werden 14 Stahlbetonstützen mit freier und behinderter axialer Ausdehnung untersucht. Auf Basis eines realen Gebäudes werden unter anderem die Steifigkeit, welche das umgebende Tragwerk repräsentiert, der Lastausnutzungsgrad und die Brandeinwirkung variiert. Mit dem Ziel das Stützenverhalten unter thermischem Zwang im Detail zu analysieren, erfolgen Brandversuche und numerische Simulationsberechnungen. Dabei werden die erforderlichen mechanischen Materialeigenschaften des Betons bei erhöhten Temperaturen aus experimentellen Daten abgeleitet. Der Beitrag liefert einen Einblick in die experimentellen und numerischen Ergebnisse. Es zeigt sich, dass die behinderte axiale Ausdehnung und die Möglichkeit einer Lastumlagerung bei Stauchung der Stütze einen erheblichen Einfluss auf das Versagen im Brandfall haben. Die mittels Substrukturtechnik erzeugte Zwängung des umgebenden Tagwerks führt zu einem Anstieg der Axialkraft in der Stütze sowie einer Abnahme der maximalen Stützenausdehnung. Gleichzeitig setzt die Stauchung der Stütze früher ein. Wird eine Stütze-Tragwerk-Interaktion auch für den Stauchungsbereich der Stütze angesetzt, kann der Vorteil einer Lastumlagerung genutzt werden. Somit kann trotz einer höheren mechanischen Belastung während der Ausdehnungsphase der Stütze ein späterer Versagenszeitpunkt als bei einer konventionell geprüften Stütze erreicht werden. T2 - Symposiums Heißbemessung – Structural Fire Engineering 2025 CY - Braunschweig, Germany DA - 29.09.2025 KW - Substrukturtechnik KW - Stahlbetonstützen KW - Feuerwiderstand KW - Stützenbrandversuche KW - Numerik PY - 2025 SP - 38 EP - 52 PB - TU Braunschweig AN - OPUS4-64581 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neugum, Tim T1 - Berücksichtigung der Tragwerksumgebung bei Brandversuchen an Stahlbetonstützen N2 - Das Tragwerk eines Gebäudes ist aus einzelnen Bauteilen zusammengesetzt. Insbesondere bei lokalen Brandereignissen bauen sich durch die Ausdehnung der vom Brand betroffenen Bauteile gegen das umgebende kältere Gesamttragwerk Zwangsbeanspruchungen auf. Bei konventionellen Brandprüfungen werden diese Zwangsbeanspruchungen in der Regel nicht berücksichtigt, da die Prüfsystematik auf Einzelbauteilprüfungen bei konstanter mechanischer Last ausgelegt ist. Die Prüfung komplexer, realmaßstäblicher Tragwerke ist oftmals nicht möglich. Die Interaktion des Einzelbauteils mit dem umgebenden Tragwerk kann sich sowohl positiv als auch negativ auf den Feuerwiderstand auswirken. Als nachteilig ist der thermische Zwang und die daraus resultierende Lasterhöhung zu nennen. Gleichzeitig kann eine Stauchung der Stütze zu einer Umlagerung von Kräften in das umgebende Tragwerk führen und damit den Versagenszeitpunkt der Stütze verzögern. Mit Hilfe der Substrukturtechnik kann das Verhalten einer Stütze im Brandfall unter Berücksichtigung der Interaktion mit dem umgebenden Tragwerk analysiert werden. In einem gemeinsamen DFG-Vorhaben der Bundesanstalt für Materialforschung und -prüfung (BAM) und dem Institut für Baustoffe, Massivbau und Brandschutz (iBMB) der TU Braunschweig werden 14 Stahlbetonstützen mit freier und behinderter axialer Ausdehnung untersucht. Auf Basis eines realen Gebäudes werden unter anderem die Steifigkeit, welche das umgebende Tragwerk repräsentiert, der Lastausnutzungsgrad und die Brandeinwirkung variiert. Mit dem Ziel das Stützenverhalten unter thermischem Zwang im Detail zu analysieren, erfolgen Brandversuche und numerische Simulationsberechnungen. Dabei werden die erforderlichen mechanischen Materialeigenschaften des Betons bei erhöhten Temperaturen aus experimentellen Daten abgeleitet. Der Beitrag liefert einen Einblick in die experimentellen und numerischen Ergebnisse. Es zeigt sich, dass die behinderte axiale Ausdehnung und die Möglichkeit einer Lastumlagerung bei Stauchung der Stütze einen erheblichen Einfluss auf das Versagen im Brandfall haben. Die mittels Substrukturtechnik erzeugte Zwängung des umgebenden Tagwerks führt zu einem Anstieg der Axialkraft in der Stütze sowie einer Abnahme der maximalen Stützenausdehnung. Gleichzeitig setzt die Stauchung der Stütze früher ein. Wird eine Stütze-Tragwerk-Interaktion auch für den Stauchungsbereich der Stütze angesetzt, kann der Vorteil einer Lastumlagerung genutzt werden. Somit kann trotz einer höheren mechanischen Belastung während der Ausdehnungsphase der Stütze ein späterer Versagenszeitpunkt als bei einer konventionell geprüften Stütze erreicht werden. T2 - Symposiums Heißbemessung – Structural Fire Engineering 2025 CY - Braunschweig, Germany DA - 29.09.2025 KW - Substrukturtechnik KW - Stahlbetonstützen KW - Feuerwiderstand KW - Stützenbrandversuche KW - Numerik PY - 2025 AN - OPUS4-64583 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiz Eddin, Ahmad T1 - Tragfähigkeit und Abplatzverhalten von Carbonbeton bei hohen Temperaturen N2 - Zur Bewertung der Biegetragfähigkeit dünnwandiger, carbonbewehrter Betonbauteile unter Temperatureinfluss wurden 4-Punkt-Biegeversuche in drei thermischen Konfigurationen durchgeführt. Die Ergebnisse zeigen, dass bei Raumtemperatur kein signifikanter Einfluss der Vorspannung auf die Bruchkraft vorliegt. Mit steigender Temperatur nimmt die Biegetragfähigkeit infolge des Festigkeitsverlustes von Beton und Carbonbewehrung sowie durch das Schmelzen der Tränkungsmatrix deutlich ab. Zwei Versagensmechanismen konnten identifiziert werden, d.h. Zugversagen bei hoher Vorspannung und Verbundversagen bei niedriger Vorspannung. Die Abnahme der Verbundfestigkeit ist auf das Erweichen der Tränkungsmatrix bei Überschreitung der Glasübergangstemperatur zurückzuführen. Bei Temperaturen oberhalb von etwa 200 °C ist keine Tränkungsmatrix und daraus resultierende Verbundwirkung mehr vorhanden. Darüber hinaus wurden im Rahmen von Abplatzversuchen drei Schutzmaßnahmen zur Vermeidung von Betonabplatzungen im Brandfall untersucht, d.h. reaktives Brandschutzsystem (RBS), zementgebundene Brandschutzplatten sowie Zugabe von Polypropylenfasern (PP-Fasern) zur Betonmischung. Die Ergebnisse zeigen, dass der Typ des Carbongeleges die Wirksamkeit der Schutzmaßnahmen beeinflusst. Während die Zugabe von PP-Fasern das Abplatzen bei beiden untersuchten Gelegetypen verhindern konnte, war dies bei RBS und Brandschutzplatten nur bei einem Gelegetyp erfolgreich. Die Ursache der Abplatzungen ist auf das temperaturbedingte Schmelzen und die damit einhergehende Volumenzunahme der im Gelege Q85 vorhandenen Hilfsfäden zurückzuführen. Dies führt zu einer Rissbildung parallel zur brandbeanspruchten Betonoberfläche. Der Dampfdruck im Beton ist trotz reduzierter Erwärmungsgeschwindigkeit zu hoch, weshalb es zum Abplatzen kommt. Im Gegensatz dazu bewirkt das Schmelzen der PP-Fasern eine Erhöhung der Permeabilität des Betons. Dadurch kann der entstehende Wasserdampf frühzeitig entweichen, sodass der Dampfdruck unterhalb der kritischen Schwelle bleibt, die für das Abplatzen erforderlich wäre. T2 - Symposium Heißbemessung 2025 CY - Braunschweig, Germany DA - 29.09.2025 KW - Carbonbeton KW - Biegetragfähigkeit KW - Abplatzverhalten PY - 2025 AN - OPUS4-64883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiz Eddin, Ahmad T1 - Fire Testing of various measures to prevent spalling of CFRP-reinforced concrete N2 - In a joint research project, an interdisciplinary team of researchers and practitioners design a new prefabricated, prestressed floor system for common building constructions. To achieve a lightweight floor element, concrete with a high compressive strength is combined with high tensile strength carbon textile reinforcement. The corrosion resistant carbon textile reinforcement consists of carbon fibres embedded in a polymer matrix. The use of Carbon Fibre Reinforced Polymer (CFRP) allows a reduction of the required concrete cover and enables the design of thin-walled and highly efficient cross-sections in a variety of shapes. However, the use of concrete with a high compressive strength increases the risk of explosive spalling of concrete under fire exposure. Experimental studies conducted at BAM have shown that the carbon textile reinforcement creates a discontinuity in the concrete resulting in a delamination of the concrete cover. Concrete spalling also depends on the type of CFRP-reinforcement. The comparison of the specimens with different CFRP-reinforcement shows an earlier event of spalling in the case of epoxy-based CFRP. In the 8th International RILEM Workshop on Concrete Behaviour due to Fire Exposure, fire tests on CFRP-reinforced concrete elements without and with various protection measures to prevent spalling will be presented and discussed. The protection measures include the application of an intumescent coating to the fire exposed surface as well as the use of a modified concrete mixture containing polypropylene fibres (PP-fibres). The concrete mixtures used have a maximum grain size of 2 mm and correspond to concrete grade C50/60. The specimens include variants with and without carbon textile reinforcement. Two types of textile reinforcements are investigated, i.e., acrylate-based and epoxy-based resin. The specimens have circular and square forms. The lateral surfaces of the circular specimens are enclosed by a steel ring to restrain the thermal expansion of the concrete during the fire test. In contrast, at the square specimens a free thermal expansion is allowed. The fire tests are carried out with a fire exposure in accordance to the ISO-834 fire curve and without mechanical load. During the fire test, thermocouples are used to measure the temperature within the specimen and on the unexposed surface. The fire test results show that the intumescent coating effectively prevents the concrete spalling in both unreinforced specimens and those with acrylate-based CFRP-reinforcement. However, the intumescent coating was not able to prevent the concrete spalling at the specimens with epoxy-based CFRP-reinforcement, despite the time of the spalling was delayed compared to uncoated specimens. The specimens containing PP-fibres show no spalling, which applies to both types of carbon textile reinforcement used as well as the unreinforced variant. T2 - 8th International RILEM Workshop on Concrete Behaviour due to Fire Exposure CY - Kraków, Poland DA - 18.09.2025 KW - Concrete spalling KW - CFRP reinforcement KW - Fire test PY - 2025 AN - OPUS4-64885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiz Eddin, Ahmad A1 - Stelzner, Ludwig A1 - Häßler, Dustin A1 - Hothan, Sascha T1 - Tragfähigkeit und Abplatzverhalten von Carbonbeton bei hohen Temperaturen N2 - Zur Bewertung der Biegetragfähigkeit dünnwandiger, carbonbewehrter Betonbauteile unter Temperatureinfluss wurden 4-Punkt-Biegeversuche in drei thermischen Konfigurationen durchgeführt. Die Ergebnisse zeigen, dass bei Raumtemperatur kein signifikanter Einfluss der Vorspannung auf die Bruchkraft vorliegt. Mit steigender Temperatur nimmt die Biegetragfähigkeit infolge des Festigkeitsverlustes von Beton und Carbonbewehrung sowie durch das Schmelzen der Tränkungsmatrix deutlich ab. Zwei Versagensmechanismen konnten identifiziert werden, d.h. Zugversagen bei hoher Vorspannung und Verbundversagen bei niedriger Vorspannung. Die Abnahme der Verbundfestigkeit ist auf das Erweichen der Tränkungsmatrix bei Überschreitung der Glasübergangstemperatur zurückzuführen. Bei Temperaturen oberhalb von etwa 200 °C ist keine Tränkungsmatrix und daraus resultierende Verbundwirkung mehr vorhanden. Darüber hinaus wurden im Rahmen von Abplatzversuchen drei Schutzmaßnahmen zur Vermeidung von Betonabplatzungen im Brandfall untersucht, d.h. reaktives Brandschutzsystem (RBS), zementgebundene Brandschutzplatten sowie Zugabe von Polypropylenfasern (PP-Fasern) zur Betonmischung. Die Ergebnisse zeigen, dass der Typ des Carbongeleges die Wirksamkeit der Schutzmaßnahmen beinflusst. Während die Zugabe von PP-Fasern das Abplatzen bei beiden untersuchten Gelegetypen verhindern konnte, war dies bei RBS und Brandschutzplatten nur bei einem Gelegetyp erfolgreich. Die Ursache der Abplatzungen ist auf das temperaturbedingte Schmelzen und die damit einhergehende Volumenzunahme der im Gelege Q85 vorhandenen Hilfsfäden zurückzuführen. Dies führt zu einer Rissbildung parallel zur brandbeanspruchten Betonoberfläche. Der Dampfdruck im Beton ist trotz reduzierter Erwärmungsgeschwindigkeit zu hoch, weshalb es zum Abplatzen kommt. Im Gegensatz dazu bewirkt das Schmelzen der PP-Fasern eine Erhöhung der Permeabilität des Betons. Dadurch kann der entstehende Wasserdampf frühzeitig entweichen, sodass der Dampfdruck unterhalb der kritischen Schwelle bleibt, die für das Abplatzen erforderlich wäre. T2 - Symposium Heißbemessung 2025 CY - Braunschweig, Germany DA - 29.09.2025 KW - Carbonbeton KW - Biegetragfähigkeit KW - Abplatzverhalten PY - 2025 SP - 1 EP - 13 PB - Institut für Baustoffe, Massivbau und Brandschutz (iBMB), Technische Universität Braunschweig CY - Braunschweig, Deutschland AN - OPUS4-64882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hothan, Sascha A1 - Häßler, Dustin A1 - Stelzner, Ludwig A1 - Fürst, Richard A1 - Eiz Eddin, Ahmad T1 - Lösungsansätze für neue Herausforderungen im konstruktiven baulichen Brandschutz N2 - Der Klimawandel und die zunehmende Ressourcenknappheit stellen Herausforderungen dar, die in Zukunft grundlegende Anpassungen in der Art des Umgangs mit Rohstoffen, Energie und des Wirtschaftens an die Gesellschaft stellen werden. In der Leichtbaustrategie der Bundesregierung wird zusammenfassend festgestellt, dass der fortschreitende Klimawandel Technologien erfordert, die die Transformation der Wirtschaft, eine ressourcenschonende Wertschöpfung und eine nachhaltige und resiliente Rohstoffversorgung sicherstellen. Aus diesen für alle Wirtschaftszweige sehr allgemein formulierten Anforderungen und vor dem Hintergrund eines wachsenden Bedarfs schnell verfügbarer Bausubstanz, lassen sich konkrete Anforderungen für das Bauwesen ableiten. Es geht um die Reduktion des Ressourcenverbrauchs für die Errichtung und den Betrieb neuer Gebäude sowie die Nach- und Weiternutzung bestehender Bausubstanz. In der Bundesanstalt für Materialforschung und -prüfung (BAM) wurde im Themenfeld Infrastruktur das Aktivitätsfeld Leichtbau ins Leben gerufen, das die Forschungsaktivitäten zum Leichtbau bündelt. Im vorliegenden Beitrag werden ausgewählte Projekte in Bezug auf den konstruktiven baulichen Brandschutz vorgestellt und die besonderen Herausforderungen verdeutlicht sowie die daraus abgeleiteten technischen Lösungsmöglichkeiten aufgezeigt. Als Beispiel einer Bauweise mit höchstmöglicher Effizienz in der Materialausnutzung sowie exzellenter Recyclingfähigkeit des Werkstoffs wird im Abschnitt „Einsatz reaktiver Brandschutzsysteme auf Stahlzuggliedern mit Vollprofil“ gezeigt, wie der Feuerwiderstand von Stahlzuggliedern mit minimalem Materialaufwand sichergestellt werden kann. Anhand des Beispiels der „Alten Aktienspinnerei“ verdeutlicht sich die Relevanz der Methode für die Nachnutzung historischer Bausubstanz. Im Abschnitt „In situ Überprüfung des Feuerwiderstands von Stahltragwerken mit gealterten reaktiven Brandschutzsystemen“ wird gezeigt, wie in Zukunft die minimalinvasive Überprüfung der Wirksamkeit bereits über Jahrzehnte in Nutzung befindlicher reaktiver Brandschutzsysteme (RBS) ermöglicht wird. Dies bildet die Grundvoraussetzung für eine Weiternutzung sowie möglicherweise erforderliche Instandsetzung auch nach Überschreitung der ursprünglich vorgesehenen Nutzungsdauer des RBS anhand einer quantitativen Aussage zum noch vorhandenen Feuerwiderstand. Eine wichtige Strategie im Betonbau zur Verringerung des CO2-Ausstoßes wird im Abschnitt „Feuerwiderstand von Leichtbaukonstruktionen aus vorgespanntem Carbonbeton“ vorgestellt. Das Verbundforschungsvorhaben verfolgt die Entwicklung eines neuen Deckensystems aus vorgespanntem Carbonbeton. Die angestrebte Leichtbauweise verringert den Einsatz von Zement durch Minimierung des erforderlichen Betonvolumens. Um einen möglichst dünnen Deckenspiegel zu erzeugen ist eine Reduzierung der Betondeckung erforderlich, weshalb für den Brandfall Maßnahmen zu ergreifen sind, die die Erwärmung der Carbonbewehrung und die damit einhergehende Degradation des Materials begrenzen. In diesem Zusammenhang sind auch wirksame Strategien zur Eindämmung von Beton-abplatzungen zu entwickeln. Abschließend wird im Abschnitt „Gebäude in Stahl-Modulbauweise mit selbstaussteifenden Raumzellen“ herausgearbeitet, wie diese Bauweise zukünftig noch effizienter werden kann, indem eine Nachweismöglichkeit der aussteifenden Wände in Leichtbauweise für den Brandfall geschaffen wird. T2 - Bauphysikertreffen 2025 - Hochschule für Technik Stuttgart CY - Stuttgart, Germany DA - 28.11.2025 KW - Klimawandel KW - Ressourcenknappheit KW - Bausupstanz KW - Brandfall PY - 2025 VL - Bauphysikertagung 2025 SP - 1 EP - 12 AN - OPUS4-65371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mallikarjun, Jhenkhar A1 - Gorbushina, Anna A1 - Kuzyakov, Yakov A1 - Koester, Moritz A1 - Castro, Rodrigo A1 - Yudina, Anna A1 - Abdallah, Khaled A1 - Matus, Francisco J. A1 - Dippold, Michaela A. T1 - Post-fire recovery of temperate and mediterranean ecosystems: An interplay between fire severity, soil nutrients, and vegetation from early-stage to decadal-scale dynamics N2 - Wildfires strongly alter soil properties, which in turn affect ecosystem recovery over extended periods, though long-term impacts are less certain. This study investigated a 14-year post-fire chronosequence in Chile’s mediterranean and temperate humid forests, revealing ecosystem-specific soil properties and nutrient recovery mechanisms. By analysing sites at successional stages, the chronosequence approach assessed temporal changes and ecosystem recovery, revealing long-term wildfire effects on soil dynamics and nutrients recovery. Wildfires raised soil bulk density to 0.9 g cm−3 in humid temperate and 1.2 g cm−3 in mediterranean ecosystems. Mediterranean soils experienced greater compaction from organic matter loss, soil aggregate destruction, ash-clogged pores, and topsoil erosion. Soil texture shifts were ecosystem-dependent: mediterranean soils increased 10–12 % in clay and silt through ash redistribution and aggregation, while temperate soils saw sand content rise by 0.74 % and 0.32 % yearly at 0–5 and 5–10 cm depths from thermal disaggregation and erosion. Ground vegetation recovers quickly, but physical soil properties like bulk density require over 14 years to return to pre-fire conditions. In humid temperate forests, ash input initially increased soil pH (4.8 to 5.8), reducing acidity, mitigating aluminium toxicity, while increasing nutrient availability. Base cation stocks increased in mediterranean woodlands (e.g., Ca: up to 0.41 Mg ha−1 y−1) due to ash retention, lower leaching, and ash infiltration into subsoil. Nutrient stocks in humid forests recovered slowly (Ca: 0.087–0.13 Mg ha−1 y−1) due to rainfall-driven leaching and low subsoil reserves. Carbon and N losses were restricted to the litter horizon in temperate forests, recovering via fire-resistant tree inputs, whereas mediterranean soils suffered severe C and N depletion from vegetation loss, erosion, and low N fixation. Fire effects and recovery are ecosystem-specific, shaped by landscape, geology, hydrology, and vegetation resilience. Understanding how fire regimes affect soil and nutrient recovery is vital for improving projections in fire-prone regions. KW - Historical fire & Wildfire KW - Nutrients Ecosystem recovery & Vegetation succession KW - Chronosequence approach KW - Losses of nutrients & Nutrients stocks KW - Wildfire PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642918 DO - https://doi.org/10.1016/j.catena.2025.109431 SN - 0341-8162 VL - 260 SP - 1 EP - 13 PB - Elsevier B.V. AN - OPUS4-64291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - An, Q. A1 - Bäßler, Ralph A1 - Hertwig, Andreas A1 - Rehfeldt, Rainer A1 - Hidde, Gundula A1 - Otremba, Frank T1 - Investigation of Mechanical Stress and B10 Exposure on FKM Polymer N2 - Mechanical stress often accelerates the failure of polymer materials. The aim of this research is to study the interaction between the sealing material FKM and biofuels B10 (heating oil with 10% biodiesel). The mechanical stress test was carried out in a special apparatus. Both mechanical and non-mechanical stress tests were conducted on specimens at 20, 40, and 70 °C for 28 days to document changes in mass, volume, and tensile properties. Both increasing temperature and mechanical stress have a significant effect on the tensile strength of the FKM polymer when exposed to B10. The combination of increasing temperature and mechanical stress induced rupture within 2 h. It was also established that FKM polymer with pre-exposure in B10 survived longer during mechanical stress compared to specimens exposed only to air. With the support of infrared (IR) spectroscopy, we were able to confirm the penetration of B10 into the FKM polymer. T2 - TMS 2024 Annual Meeting & Exhibition Teilnahme mit Präsentation CY - Orlando-Florida / USA DA - 03.03.2024 KW - Biofuels KW - Sealing materials KW - Mechanical stress KW - Change in tensile properties PY - 2024 SN - 978-3-031-50349-8 DO - https://doi.org/10.1007/978-3-031-50349-8_108 SP - 1253 EP - 1261 PB - Springer CY - Orlando-Florida / USA AN - OPUS4-59638 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chacon Castro, Jose P. T1 - Flame retardant polylimonene carbonate: Material innovation as a game changer N2 - This research seeks to understand and identify the most promising approaches to enhance the flame resistance of poly(limonene carbonate) (PLimC). Furthermore, the goal is to develop a PLimC-based material that incorporates halogen-free flame retardants (FRs) that are not only highly effective but also environmentally sustainable, contributing to the advancement of greener materials for safer use. The plastic industry depends on fossil-based materials, causing environmental concerns. PLimC, a sustainable polymer derived from limonene and CO₂, offers a promising alternative. Its use in fire-safe applications underscores the need to optimize its performance. This study evaluates halogen-free FRs to identify and understand the most promising approaches to enhance PLimC’s flame resistance, aiming to improve fire safety and support eco-friendly material development. This study has as its main task to conduct experimental evaluations to analyze the thermal properties, flammability, and fire behavior of each system. Pyrolysis, together with the evolved gases of the samples, were analyzed by thermogravimetric analysis coupled with a FTIR spectrometer. The energy content was determined by using a bomb calorimeter. The flammability of the samples was assessed by the reaction to small flame tests such as the UL 94 burning chamber and limiting oxygen index (LOI). The burning behavior in forced flamed conditions was evaluated using the cone calorimeter. Thermal properties were first evaluated to gain a deeper understanding of the pure PLimC thermal stability and fire behavior. This analysis builds on PLimC's structural similarity to polycarbonate (PC), due to its carbonate group, and to polyolefins (PO), due to its aliphatic limonene-derived segment, providing insights into optimizing PLimC for sustainable, fire-safe applications. The initial results, which defined our starting point, showed that the LOI of PLimC was 17.2%, very close to that of PO such as polyethylene (PE) and polypropylene (PP) (~18%). In contrast, PC has a higher LOI of ~24%. Additionally, PLimC did not produce any char (0 wt.-%), similar to PO, whereas PC forms char due to its phenolic structures. The effective heat of combustion of PLimC, measured using bomb calorimetry, was determined to be 31.1 MJ/kg. This value is comparable to that of PC (~30 MJ/kg) but significantly lower than PO (~44 MJ/kg). These findings, which demonstrated similarities to both PO and PC, prompted the evaluation of various commercially available FRs at standard market concentrations. Four halogen-free FR systems were chosen for evaluation: 1. mixture of APP (20 wt.-%) + pentaerythritol (10 wt.-%) as an intumescent system [PLimC / APP / Penta], 2. mixture of the phosphorus compound PX200® (16 wt.-%) + PTFE (0.4 wt.-%) as antidripping [PLimC / PhosC / PTFE], 3. aluminum trihydroxide ATH (50 wt.-%) [PLimC / ATH], and the potassium sulfonate salt Bayowet® (0.4 wt.-%) [PLimC / SulfS]. The concentrations were decided according to the standards used in the industry. Cone calorimeter results show that PLimC has the usual behavior of a non-charring specimen (fast burning and high peak of heat release). ATH proved to be the most effective flame retardant, achieving the biggest reductions in the effective heat of combustion (EHC) and total heat evolved (THE). Additionally, ATH achieved the highest increase in the LOI (17.1% to 26.0%). With these results, we understood that the FRs commonly used with polyolefins (at concentrations standard in the industry) exhibit similar behavior in terms of flammability and flame retardancy when applied to PLimC. Additionally, we aim to investigate bio-based flame retardants to further improve the sustainability of the material. Given that phytic acid salts and lignin have demonstrated effective flame-retardant performance in polyolefins, we consider these compounds promising candidates for application in our system. T2 - 6th Asia-Oceania Symposium for Fire Safety Materials Science and Engineering CY - Beijing, China DA - 16.10.2025 KW - Halogen free flame retardants KW - Poly(limonene carbonate) KW - Sustainability PY - 2025 AN - OPUS4-65015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard T1 - Sustainability features future flame retardancy: Microalgae phosphorus-enriched in wastewater and polylimonencarbonate N2 - Rather environmentally friendly flame retardant bio-composites have become part of the state of the art. Using two illuminating examples the talk gives an outlook towards sustainability beyond “partly bio-carbon”. In waste water phosphorous-enriched microalgae are introduced as bio-based adjuvant in polylactide (PLA). The flame retardancy effect is discussed and compared with other novel bio-based additives. In a combination with a commercial flame retardant, half of the commercial flame retardant can be replaced without worsening the UL 94 classification V0. In the second example flame retardant routes for poly(limonene carbonate) are discussed. Poly(limonene carbonate) is synthesized with a bio-based monomer limonene oxide and CO2. A novel bio-based flame retardant melem phytate together with bio-based charring agents is proposed to realize a fully bio-based flame retardant poly(limonene carbonate). T2 - Fire Resistance in Plastics CY - Düsseldorf, Germany DA - 01.12.2025 KW - Poly(limonene carbonate) KW - Microalgae KW - Phosphorous flame retardants KW - Melem phytate KW - Waste water phosphorous PY - 2025 AN - OPUS4-65014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Cozzolino, Chiara A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Safety Assessment of MLI Super-Insulation Systems for Cryogenic Liquid-Hydrogen Tanks in Fire Scenarios N2 - In the context of green energy transition, cryogenic tanks insulated by MLI and vacuum are emerging as a leading solution to store hydrogen in heavy-duty vehicles. However, the integrity of such tanks can be jeopardized by fire. In such a scenario, MLI materials degradation can occur, leaving the tank unprotected from the fire heat flux, with consequent rapid pressurization and a high risk of failure. This study presents a safety assessment of non-combustible MLI under fire exposure based on the estimation of the time to mechanical failure of the equipment. This is calculated through an innovative model that simulates the thermomechanical response of the tank, including the MLI thermal degradation and the pressure-relief valve (PRV) operation. The application to several case studies that consider a typical LH2 tank featuring a wide range of MLI configurations demonstrated the likelihood of failure in case of exposure to a hydrocarbon pool fire, providing also comprehensive insights into the impact of the insulation characteristics and operating conditions on the time to failure. T2 - Loss Prevention 2025 CY - Bologna, Italien DA - 09.06.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety KW - Tank PY - 2025 DO - https://doi.org/10.3303/CET25116036 SN - 2283-9216 IS - 116 SP - 211 EP - 216 PB - AIDIC AN - OPUS4-63739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Scharff, Erik T1 - Untersuchungen zur Ausbreitung brennbarer Schwergase in längsdurchströmten Straßentunneln N2 - In combination with new types of drive technologies, more and more flammable gases could be introduced into the traffic area “road tunnel” in future. If these vehicles have an accident and the gases are subsequently released, there is the possibility that the mentioned substances show a heavy gas behavior due to their storage conditions. From a safety point of view, this scenario has to be assessed with regard to its effects on the tunnel structure and the people involved. The aim of the experimental investigations carried out in this work is to create the basis for such an analysis by investigating the spreading behavior of the gases after they have been released in the tunnel and determining the influence of individual geometric and operational parameters on this behavior. Specifically, this work is based on the scenario of a continuous, momentum-free release of propane within a vaulted road tunnel with active longitudinal ventilation. The tunnel-specific boundary conditions that are relevant to this scenario are first worked out by a theoretical analysis. The basis of the subsequent experimental part is formed by two test rigs built as part of the work, which are similar in their essential features, but differ in scale. In both facilities, the aforementioned release scenario was simulated under various boundary conditions based on an idealized tunnel segment. The dispersion behavior is primarily assessed by the averaged concentration distribution near the ground, which results from a large number of detectors arranged in the experimental area. The detectors operate on the principle of weakening infrared light in the presence of hydrocarbons. Measurements of the flow field properties accompany the concentration measurements. The conception of the test rig on a scale of 1:12 is based on dimensional analysis. The actual release campaign comprises a large number of individual experiments in which selected parameters were varied over the tunnel-relevant range. The predicted heavy gas behavior for propane emerged clearly in the experiments. In cases in which the cloud laterally reaches the tunnel walls, the gases are channeled, which is accompanied by reduced longitudinal dilution. It was possible to identify the release rate and the flow velocity as the factors that have the greatest influence. The former basically increased the concentration, while the latter decreased it. All other tested parameters resulted in more complex propagation situations, which force a differentiated consideration of the influence. Lifting the source from the ground also reduced the concentration. In the case of an eccentrically arranged source and a transverse slope of the roadway, the influence is largely limited to the lateral concentration distribution in the immediate vicinity of the source. Nevertheless, both parameters plus a possible longitudinal slope of the roadway only showed a slight effect on the area far-downstream from the source. In addition, the phenomenon of backlayering, which is known from the spreading of fire smoke in the tunnel, could be demonstrated with a steep longitudinal slope. Obstacles increased the complexity of the situation. While globally the dilution of the cloud is partly invariant to obstacles, locally an increase as well as a decrease in concentration can be observed under certain conditions. For the unobstructed tunnel, it was finally possible to define a dimensionless parameter that describes the curve of the longitudinal dilution on the ground within the heavy gas cloud. From this, a simple graphical nomogram is derived for the continuous release of heavy gases in an unobstructed tunnel environment, which can be used to estimate the concentration in relation of a dimensionless source distance. For exploring the real, undistorted behavior experiments were also carried out in original scale. Due to the similarity of both test rigs in terms of scale, the test results can also be used to check the scalability of the spreading situations. For that, two configurations that have already been examined in small scale were selected. The main limitation for test execution and regarding the scalability comparison was the dependence of the flow conditions within the test rig from external wind conditions which occurred despite of taken countermeasures. The large-scale release was associated with pronounced fog formation. The near-ground spreading corresponding to the heavy gas behavior could be confirmed. However, in detail the spread was far more unsteady. Looking at the time-averaged concentrations, the processes already known from the small-scale test were qualitatively well approximated. Remaining quantitative differences, however, require critical consideration. This discrepancy is more likely a consequence of the experimental compromises have to be made in the specific case. From the observed gas behavior, the development of a surface fire initiated by ignition of the re-leased gases is considered to be the most likely subsequent scenario for the release of heavy, flam-mable gases in tunnel-like enclosures. The thesis concludes with recommendations on the methodological approach to be favored in the future. KW - LNG KW - Schwergas KW - Stoffausbreitung KW - Propan PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:gbv:ma9:1-1981185920-1206411 DO - https://doi.org/10.25673/118683 VL - 2025 SP - 1 EP - 225 PB - Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik CY - Magdeburg AN - OPUS4-65012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar T1 - Experimental and Numerical Investigation on Multi-layer Insulation Thermal Deterioration N2 - To reduce carbon dioxide emissions, energy carries such as hydrogen consider to be a solution. Consumption of hydrogen as a fuel meets several restrictions such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquid phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Some studies have been revealed vulnerability of this type of insulation against high heat flux, for instance a fire accident. Some investigations have been depicted the importance of consideration of the MLI thermal degradation in terms of its reflective layer. However, limited number of studies have been focused on the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Moreover, the contribution of each individual spacer in all cases regarding the experimental temperature range is assessed to be around 8%. This value may increase to around 50% for glass paper and polyester spacers, and to around 25% for glass fleece spacers as the number of spacer layers increases up to six layers. To utilize the outcomes of the experiment later and integrate the results into numerical and CFD simulations, a model is proposed for the mentioned experimental temperature range up to 300°C to predict a heat flux attenuation factor. The model proposes a fitting factor that can reproduce the least square fitted line to the experimental data. T2 - 15th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions Naples (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - Heat Transfer KW - Hydrogen Storage PY - 2024 AN - OPUS4-60457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Davide, Camplese A1 - Giordano, Emrys Scarponi A1 - Valerio, Cozzani A1 - Frank, Otremba T1 - Experimental investigation on the behavior of thermal super insulation materials for cryogenic storage tanks in fire incidents N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks? The storage of cryogenic fuels requires tanks with Thermal Super Insulations (TSI) to keep the fluid cold and limit the formation of boil-off gas. TSI has proven itself in some applications since the middle of the 20th century, but in the land transport sector they are still quite new, where accidents involving fires, collisions, and their combination are to be expected. This work focuses on investigating the behavior of different types of TSI while exposed to a heat source representing a fire. To this aim, a High-Temperature Thermal Vacuum Chamber (HTTVC) was applied, which allows the thermal loading of a thermal insulation material in a vacuum and measuring the heat flow transported through the TSI in parallel. In this study, the results of 6 samples are presented regarding 3 types of MLI, rock wool, perlites, and microspheres. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as to a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for reducing the risks to people and infrastructures in the progressive establishment of tanks for cryogenic fluids in our industry and society. The data presented in the study can be used to improve the design of tanks and TSIs, the assessment of accident scenarios, and the development of measures for first responders. KW - Liquefied hydrogen KW - Liquefied natural gas KW - Tanks KW - Fire KW - Insulation KW - MLI KW - Perlite KW - Rock wool KW - Microspheres PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599947 DO - https://doi.org/10.1016/j.psep.2024.04.131 SN - 0957-5820 VL - 187 SP - 240 EP - 248 PB - Elsevier AN - OPUS4-59994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Untersuchung der Gefährdung von Personen und Bauwerken in Folge des Versagens von LNG-Kraftstoffspeichern für Fahrzeuge in Tunneln N2 - Liquefied Natural Gas (LNG) aus regenerativen Quellen, stellt einen potenziellen Kraftstoff für den Schwer- und Fernverkehr des Straßenverkehrs dar. Gegenüber seinen positiven Eigenschaften zu dem in diesem Verkehrssektor häufig verwendeten Kraftstoff Diesel birgt der Kraftstoff aber auch Gefahren für Personen und Bauwerke durch seine sehr niedrige Temperatur bei der Speicherung von ca. -160 °C und seine Explosionsfähigkeit in der Gas-Phase. In der Arbeit wurde sich mit der Gefährdung von Personen und Bauwerken hinsichtlich der von LNG ausgehenden Gefahren in Tunneln auseinandergesetzt. Tunnel stellen besonders schützenswerte Bauwerke dar, da aus vorhergehenden Störfällen in Tunneln bekannt ist, dass diese mit hohen Personen-, Bauwerks-, und Volkswirtschaftlichen-Schäden einhergehen können. Untersuchungsschwerpunkt bei der Bewertung von Gefährdungen durch LNG stellte eine Ereigniskaskade bestehend aus Freisetzung, Verdampfung, Stoffausbreitung und Zündung des sich gebildeten explosionsfähigen LNG-Gas/Luft-Gemisches dar. Mit dem Ziel eine solche Ereigniskaskade realitätsnah vorhersagen und zukünftig hierzu Risikoanalysen durchführen zu können wurden innerhalb der Arbeit Parameterstudien sowie Kalibrierungen und Validierungen gegenüber experimentellen Untersuchungen durchgeführt. Mit den Modellen wurden in der Arbeit exemplarische Fallbeispiele zu Störfällen untersucht. Ergebnisse dieser waren, dass Gefährdungen insbesondere von flüssigem LNG nach dessen Freisetzung und der Verbrennung von LNG-Gas/Luft-Gemischen ausgingen.zeige weniger N2 - Liquefied Natural Gas (LNG) from regenerative sources is a potential fuel for heavy and long-distance road traffic. In contrast to its positive properties compared to diesel, which is often used in this transport sector, the fuel also contains hazards from its very low storage temperature of approx. -160 °C and its explosiveness in the gas phase for personal and structural safety. The dissertation dealt with the dangers to persons and infrastructures according to the hazards by LNG in tunnels. Tunnels are especiallyworth protecting structures since it is known from previous incidents in tunnels that they can go hand in hand with high damage to the people, the structure, and the economy. The main focus of the investigation into the assessment of hazards from LNG was an event cascade consisting of release, evaporation, dispersion, and ignition of the explosive LNG-vapor/air-mixture formed. To realistically predict such an event cascade and being able to carry out risk analyzes for this purpose in the future, parameter studies such as calibrations and validations were carried out concerning experimental investigations. Exemplary case studies on incidents were examined in the thesis with the validated models. The results of this were that there were especially hazards in particular from liquid LNG after its release and the combustion of LNG-vapor/air-mixtures. T2 - Disputation, TU Berlin CY - Berlin, Germany DA - 19.01.2021 KW - Erneuerbare Energien KW - Numerische Strömungsmechanik KW - Sicherheitstechnik KW - Verflüssigtes Erdgas KW - CFD KW - LNG KW - Liquefied Natural Gas KW - Renewable fuels KW - Safety engineering PY - 2021 AN - OPUS4-52119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Untersuchung der Gefährdung von Personen und Bauwerken in Folge des Versagens von LNG-Kraftstoffspeichern für Fahrzeuge in Tunneln N2 - Der Markt von LNG als Transportgut und als Kraftstoff ist seit Jahrzehnten kontinuierlich am Wachsen, wobei das Hauptanwendungsgebiet im Schiffsverkehr lag. LNG ist verflüssigtes Erdgas mit Hauptbestandteil Methan, das neben fossilen, aus erneuerbaren Quellen, wie synthetischen Methan oder Biogas, gewonnen werden kann. LNG hat als Kraftstoff sehr gute Eigenschaften dessen Potenzial als alternativer Kraftstoff zu Diesel im Schwerlast- und Fernverkehr gesehen wird. Dabei weist LNG gegenüber Diesel geringere Emissionen von CO2, Feinstaub, Stickoxiden und Lärm auf und hat gegenüber anderen erneuerbaren Energiespeichern wie CNG, Elektrobatterien oder Wasserstoff die höchste volumetrische und zweitgrößte gravimetrische Energiedichte. Neben seinen Vorteilen zu anderen erneuerbaren Energieträgern birgt LNG durch seine sehr niedrige Temperatur von bis zu 160°C und seiner Brennbarkeit aber auch neue Gefahren für Personen und Infrastrukturen. Zur Bewertung von Gefahren und zur späteren Durchführung von Risikobewertungen bedarf es Methoden und Modellen deren Untersuchung Ziel des Forschungsprojekts war. Schwerpunkt der Untersuchung stellt die Freisetzung von LNG in Tunnel, mit sich anschließender Stoffausbreitung und verzögerter Zündung des Kraftstoff-Luftgemisches dar. Unfallszenarien mit Brandereignissen in Tunnel haben gezeigt, dass diese meist mit hohen Personen, Bauwerks und volkswirtschaftlichen Schäden verbunden sind. Des Weiteren zeigten Untersuchungen das von Gasexplosionen in Umschließungen wie sie ein Tunnel darstellt, mehr Gefahren ausgehen als von Gasexplosionen im Freifeld. Im Vortrag werden die untersuchten Modelle und die aus dem Projekt gewonnenen Erkenntnisse für die Stoffausbreitung und Verbrennung der Gasphase von LNG in Umschließungen vorgestellt. T2 - Abteilungs-Vortragsseminar-Doktoranden CY - BAM Berlin, Germany DA - 08.12.2020 KW - LNG KW - Erdgas KW - Störfall KW - CFD KW - Schwergas PY - 2020 AN - OPUS4-51959 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Cryogenic Storage Tanks In Fire Incidents N2 - The ongoing geo-political conflicts and the increasing need for the implementation of measures to improve the energetic system sustainability are increasing the importance of tanks for storing cryogenic fluids in the energy industry. The most common example of cryogenic tank applications is the transport of natural gas and hydrogen in their liquid form (LNG and LH2 respectively) for which, considering the same transport volume cryogenic storage ensures significantly higher transport capacities with respect storage based solely on overpressure. A common feature of all cryogenic transported fluids is that their condition must be maintained minimizing heat leaks from the environment as much as possible. This is achieved by the implementation of thermal super Insulations (TSI) systems based on e. g. rock wool, perlites, microspheres, multilayer insulations (MLI), and vacuum which have proven to be effective in applications. However, due to the relatively short period of use in some applications, the small number of documented incidents, and the still few investigations carried out in the field, the exploitation of such systems in the cryogenic fluids transport sector still suffers from insufficient knowledge about the course and consequences of incidents. Accidents involving collisions, fires, and their combination are quite common in the transportation sector and may generate extraordinary loads on the tank and its insulation system, eventually leading to tank failure. The present study focuses on the behavior of TSI systems in tanks when it is exposed to an external heat source representative of a hydrocarbon fire scenario. This may cause an increase of the heat flux into a tank by several orders of magnitude with respect to normal design conditions, thus inducing severe and in the TSI, causing the rapid release of flammable gas and even resulting in a Boiling Liquide Expanding Vapour Explosion (BLEVE). To study such scenarios a test rig was developed at BAM that allows testing of TSI at industrial conditions and enables subsequent analysis of TSI samples. This test rig considers the typical double-walled design of tanks for cryogenic fluids with vacuum and an additional insulating material in the interspace. Adjustable electrical heating elements simulate the fire on one side of the double wall. This process allows the implementation of repeatable heat loads of up to 100 kW/m². The other side of the double wall is represented by a fluid-supported heat exchanger, which allows the simulation of cold or cryogenic conditions in the test rig, and to determine the heat flux transmitted through the double wall. Thus, the test rig allows thermal loading and performance analysis of TSI samples at the same time. In the presentation, the results of diverse tested TSI systems will be presented and discussed. As a result of this study, the list of advantages and disadvantages for the choice of tested TSI expands. Within the test, all samples degraded as a consequence of a hydrocarbon fire-orientated thermal load. Strong differences in the behavior of the tested TSI systems over temperature, location, and time were observed. Additionally, the tested MLI insulations were significantly more resistant to their base materials. These results are relevant for the design, the definition of national and international regulations, the Risk assessment, and the development of safety concepts for cryogenic tanks. T2 - Cryogenic Storage Tanks CY - Munich, Germany DA - 18.04.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation PY - 2024 AN - OPUS4-59921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Storages For Cryogenic Gases And Their Safety Part 2 N2 - To accelerate the hydrogen uptake in Europe the project KICstartH2 funded by the European Union arranged the Joint European Summer School (JESS) that deals with several topics around hydrogen. A topic in this framework is the transport and storage of energy by hydrogen. Here cryogenic energy carriers are seen as having great potential. This is because they allow significantly higher volumetric energy densities to be achieved than when these energy carriers are stored at typical temperatures on Earth. This is important for numerous energy-intensive applications, such as those found in all transport sectors. Important cryogenic energy carriers include liquefied hydrogen (LH2) and liquefied natural gas (LNG). This presentation deals with the consequences of an accidental release of a cryogenic liquid and the consequences of a fire affecting a tank. T2 - Joint European Summer School (JESS) CY - Athens, Greece DA - 15.09.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank KW - Fire KW - Safety KW - Consequences PY - 2024 AN - OPUS4-61084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, D. A1 - Scarponi, G. E. A1 - Cozzani, V. A1 - Otremba, Frank T1 - Insulation Materials Used in Tanks for the Storage of Cryogenic Fluids in Fire Scenarios N2 - The importance of tanks for storing cryogenic fluids in the energy industry is increasing because of ongoing political conflicts and the implementation of more environmentally friendly energy sources. Key representatives for the application of cryogenic tanks are natural gas in the form of Liquefied Natural Gas (LNG) and hydrogen, e. g. in the form of Liquefied Hydrogen (LH2), for which significantly higher transport capacities can be achieved with the same transport volume using cryogenic storages than with storages based solely on overpressure. What applies to all cryogenic transported fluids in common is their condition that must be maintained. Hence heat flows into the preserved fluid must be minimized. Thermal super Insulations (TSI) based on e. g. multilayer insulations (MLI), perlites, and vacuum are utilized for this purpose and have already proven themselves in similar applications. However, for the use of tanks for cryogenic fluids in the transport sector, there is insufficient knowledge regarding the course and consequences of incidents, which is due to the still short period of use and the few documented incidents, hence few investigations carried out in this field. Typical scenarios in the transport sector represent car accidents with collisions, fires, and their combination, which are associated with extraordinary loads on the tank. The focus of this study is to investigate the behavior of TSI as a result of their thermal exposure to a heat source representing a fire. It is worth mentioning that this could lead to an increase of the heat flux into a tank by several orders of magnitude, and to permanent damage of the TSI, ultimately rapid release of flammable gas as well as a Boiling Liquide Expanding Vapour Explosion (BLEVE). For this purpose, a high temperature thermal vacuum chamber (HTTVC) has been developed that allows thermal loading of MLI or perlites in a vacuum and simultaneous measurement of heat flow through this TSI. The HTTVC is designed to represent realistic insulation conditions and to withstand thermal loads from typical design fires. The HTTVC was applied to investigate TSI based on MLI and vacuum. It is shown that the thermal stress caused permanent damage to the TSI, with shrinkage, phase change, pyrolysis, and condensation being significant damage mechanisms. The results are relevant for the evaluation of accident scenarios and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - ASME 2023 Pressure Vessels & Piping Conference (PVP2023) CY - Atlanta, Georgia, USA DA - 16.07.2023 KW - LH2 KW - LNG KW - Fire KW - MLI KW - Safety PY - 2023 AN - OPUS4-57974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scarponi, G. T1 - Modelling the response of LH2 tanks equipment with Multi Layer Insulation to fire exposure N2 - Hydrogen is among the most promising candidates to replace fossil fuels in the energy transition. Hydrogen-powered vehicles are already a reality, and their number is foreseen to increase considerably in the next decade. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) appear to be one of the most effective to ensure high volumetric energy density. A potential loss of integrity of this kind of storage equipment might lead to severe consequences due to high flammability of hydrogen. This might occur, for instance, as a consequence of the exposure to an external source of heat such as a fire following a car accident. Real scale fire test results suggest that the super insulating performance of MLI systems may undergo severe degradation when this is subjected to high temperature, leaving the tank almost unprotected and leading to failure in a relatively short time. Characterizing this kind of accident scenario is crucial to ensure a safe design of storage tanks for Hydrogen-powered vehicles. This presentation provides an overview of the ongoing research work on modelling MLI LH2 tanks exposed to fire. Lumped and computational fluid dynamic based models are presented, highlighting current gaps. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis case studies. T2 - H2-Kolloquium CY - Online meeting DA - 21.06.2023 KW - LH2 KW - Cold KW - MLI PY - 2023 AN - OPUS4-57878 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Heßmann, Jennifer A1 - Werner, Jan A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Investigation of realistic fire scenarios involving cryogenic storage tanks N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks for instance from a BLEVE? A key to answer this question is to research representative fires by its characterization and its effect on the insulation. At BAM’s technical test side in Germany, a test series was started to answer this question among others. This paper presents results on a pool fire under a colorimeter, that simulates a tank. The investigation points out, that the full fire characterization approach allows to represent the fire. The findings are relevant for the investigation of a representative design fire that is applicable for the approval and improvement of tanks as well as to research accident scenarios and their consequences. T2 - 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - LH2 KW - Insulation KW - Fire KW - Liquefied Natural Gas KW - Safety PY - 2025 AN - OPUS4-63425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Experimental Research Of A Tank For A Cryogenic Fluid With a Wall Rupture In a Fire Scenario N2 - In the course of decarbonizing the energy industry, cryogenic energy carriers as liquefied hydrogen (LH2) and liquefied natural gas (LNG) are seen as having great potential. In technical applications, the challenge is to keep these energy carriers cold for a long time. This is achieved in the road transport sector and also stationary applications by thermal super insulations (TSI) which based on double-walled tanks with vacuum and multilayer insulation (MLI) in the interspace. This study focuses on the behaviour of widely used combustible MLI in a fire scenario, at vacuum and atmospheric pressure conditions. The former corresponds to the typical design condition and the latter to the condition after an outer hull rapture of a tank. Furthermore, two fire scenarios were taken into account: a standard-oriented approach and a hydrocarbon fire-oriented approach. For the study, a test rig was applied that allows testing of TSI at industrial conditions and subsequent analysis of TSI samples. The test rig allows thermal loading and performance analysis of TSI samples at the same time. Comparing the tests, the samples degraded differently. However, no sudden failure of the entire MLI was observed in any test. These results are relevant for the evaluation of incidents with tanks for the storage of cryogenic fluids and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - 15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE) CY - Neapel, Italy DA - 10.06.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank KW - Fire KW - Thermal insulation KW - Multi-Layer Insulation PY - 2024 AN - OPUS4-60456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank T1 - Systems with Cryogenic Liquefied Gases in Fire Incidents N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. The focus of this study is to investigate the behavior of different types of TSI when exposed to a heat source that represents a fire. Therefore, a High- Temperature Thermal Vacuum Chamber (HTTVC) was used that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this study, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for the evaluation of accident scenarios, the improvement of TSI, and the development of emergency measures. T2 - IMECE 2023 CY - New Orleans, Louisiana, USA DA - 29.10.2023 KW - LH2 KW - LNG KW - Fire PY - 2023 AN - OPUS4-58769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi A1 - Hofmann-Böllinghaus, Anja ED - Makovická Osvaldová, L. ED - Hasburgh, L. E. ED - Das, O. T1 - Applying experimental determined kinetic parameters to the simulation of vegetation fire in the Fire Dynamics Simulator N2 - Although intense wildfire research has been done in the US and in Australia, it cannot be transferred directly to the situation in Europe as the local vegetation has a significant influence on the fire spread. The EU-funded project TREEADS and the so-called German pilot within the project are concentrating on wildfire in Europe. Extensive experimental research is done on local vegeta-tion in Germany and the experimental results are used to adjust the Fire Dynam-ics Simulator (FDS) to local vegetation as a fuel in the calculations. The particle model and the boundary fuel model are developed for the simulation of forest fires. Both models require the kinetic input for the dehydration, pyrolysis, and char oxidation process. This three-step simplified model describes the basic fuel combustion kinetic. Most published simulations use the default kinetic input of pine needles from FDS user manual. To adjust the simulation to local vegetation, the corresponding kinetic parame-ters have been experimental investigated. Samples of pine needles, moss and other falling leaves were collected, air dried and grinded into powder. The TG analysis of all these samples were done under different heating rate of 5, 10 and 20K/min. The activation energy and the corresponding pre-exponential factor were calcu-lated. The results show that fire spread depends significantly on the vegetation and comparison with small scale experiments show good agreement using the new kinetic parameters. The new model is applied to a larger scenario and will be compared to the results of large-scale experiments for further validation of the model. T2 - Wood and Fire Safety 2024 CY - Štrbské Pleso, Slovakia DA - 12.05.2024 KW - Forest KW - Simulation KW - FDS KW - Vegetation fire KW - Fire Dynamics Simulator KW - Kinetic parameters PY - 2024 SN - 978-3-031-59177-8 DO - https://doi.org/10.1007/978-3-031-59177-8_45 SP - 389 EP - 396 PB - Springer CY - Cham AN - OPUS4-60252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manzello, Samuel L. A1 - Hofmann-Böllinghaus, Anja T1 - Editorial on special issue on wildland–urban interface (WUI) fires N2 - Research and standardization in the field of wildland fires that spread into urban areas, known as wildland–urban interface (WUI) fires, are of paramount importance globally. Recent WUI fires in Chile, Greece, Japan, and the United States of America states of California and Hawaii, following many other WUI fire disasters, have demonstrated the complex nature of this globally important problem. For these reasons, the editor in chief of Fire and Materials, Stephen Grayson, invited Samuel L. Manzello and Anja Hofmann to develop a special issue on WUI fires. In support of this effort, an open call was posted on the Fire and Materials website, soliciting papers on the following topics: • Pre- and post-fire data to understand fire spread and ignition of materials in WUI communities. • Firebrand generation from materials. • Ignition of both vegetative and human-made fuels from WUI fire exposures of direct flame contact, radiant heat, and firebrands. • Human behavior in WUI fires. • Physical modeling studies of WUI fire behavior and structure ignition. • Structure ignition mitigation strategies. • New material development to harden structures to WUI fire exposures. KW - Editorial KW - Wildfire PY - 2025 DO - https://doi.org/10.1002/fam.3308 SN - 1099-1018 SN - 0308-0501 VL - 49 IS - 5 SP - 509 EP - 511 PB - Wiley CY - New York, NY AN - OPUS4-63920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Challenges in fire safety of facades N2 - To ensure fire safety of facades will keep being a challenge as facade systems change much quicker than building regulations. Fire spread in one key issue of fire safety in facades. But falling parts, smouldering, smoke and secondary openings are issues as well. T2 - The 4th International Symposium on Fire Safety of Facades FSF 2024 CY - Lund, Sweden DA - 10.06.2024 KW - Facade systems KW - Fire testing KW - Assessement method PY - 2024 AN - OPUS4-60250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Europäische Harmonisierung von Brandstatistiken für Wohngebäude N2 - Das EU Projekt EU FireStat SI2.830108, das vom Europäischen Parlament finanziert und von der DG GROW der Europäischen Kommission in Auftrag gegeben wurde, hat aufgearbeitet, welche Terminologie in den europäische Mitgliedsstaaten verwendet wird und die von den Mitgliedstaaten erhobenen Daten über Gebäudebrände zu analysieren. Dabei wurden die Schwierigkeiten bei der Erfassung und die Unterschiede bei der Auslegung ermittelt und eine gemeinsame Terminologie sowie eine Methode zur Erfassung der erforderlichen Daten vorgeschlagen. Folgende Schwerpunkte wurden bearbeitet: Zunächst erfolgte eine Diagnose von Terminologie-, Datenerhebungs- und Auslegungsproblemen, Erhebung der Terminologie und der Datenerfassung, Identifizierung der für die Entscheidungsfindung benötigten Daten, Analyse der Methoden zur Datenerhebung Definition einer gemeinsamen Terminologie, Methodik der Kosten-/Nutzenbewertung zur Unterstützung politischer Entscheidungen, Fallstudie zur Anwendung der Methode der Kosten-/Nutzenbewertung, Beschreibung einer zukünftigen Datenerhebungsmethode. Das Ergebnis des Projekts ist eine Empfehlung, welche Daten in den Mitgliedstaaten erhoben werden sollten, um wissensbasierte Entscheidungen in Bezug auf den Brandschutz zu ermöglichen. Damit wird die Grundlage für Maßnahmen und Initiativen geschaffen, die den Brandschutz und die Brandverhütung der Mitgliedstaaten unterstützen, so dass knappe Ressourcen gezielt eingesetzt werden können. T2 - 69. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes CY - Münster, Germany DA - 15.05.2023 KW - Statistik PY - 2023 AN - OPUS4-57574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Simon T1 - Ein Modell zur Ausbreitung von Waldbränden - schnellere Vorhersagen durch den Einsatz von maschinellem Lernen, Fernerkundung und Copernicus-Daten N2 - Weltweit stellen Waldbrände eine große Bedrohung für Umwelt, Wirtschaft und menschliches Leben dar. Der fortschreitende Klimawandel verstärkt Trockenheit und Dürre, wodurch die Größe und Intensität von Waldbränden sowie das daraus resultierende Gefahrenpotential zusätzlich erhöht werden. Um im Risikofall eine schnelle und effektive Waldbrandbekämpfung zu gewährleisten, sollen Einsatzkräfte in Zukunft von KI-basierten Ausbreitungsmodellen unterstützt werden. Der Einsatz von maschinellem Lernen ermöglicht dabei schnelle und zielgerichtete Ausbreitungsvorhersagen in Echtzeit, die in den Prozess der Brandbekämpfung als zusätzliche Information einfließen können. Im Rahmen des durch das EU-Förderprogram Horizon 2020 finanzierte Projekt TREEADS wird ein solches Modell für Europa entwickelt. Dazu wird mit verschiedenen Satellitendaten des Copernicus-Programms und der NASA ein auf räumlicher und zeitlicher Ebene aufgelöster Datensatz zu europäischen Waldbränden aufgebaut. Zu den erfassten Waldbränden werden wichtigen Faktoren, die Einfluss auf die Brandausbreitung haben, ergänzt. Dazu gehören das von Copernicus bereitgestellte, digitale Geländemodell Europas und verschiedene, von Sentinel-2 Messungen abgeleitete Informationen zu Vegetation und Landnutzung. Dieser 2D-Trainingsdatensatz zu realen Waldbränden wird durch die zeitlich hochaufgelösten, meteorologischen Reanalyse-Produkte – Copernicus European Regional ReAnalysis (CERRA) und ERA5-Land – vervollständigt und ist die Grundlage für ein Modell zur Ausbreitungsvorhersage von Waldbränden. Methoden des Maschinellen Lernens können komplexe Muster in den gesammelten Daten erkennen und so zu einer verbesserten Vorhersage der Brandausbreitung beitragen. Die vielfältigen, von Copernicus bereitgestellten Daten sind dabei ein unabdingbarer Bestandteil des Modells, mit dem den Einsatzkräften ein zusätzliches Tool für den effizienten Einsatz ihrer limitierten Ressourcen zur Verfügung steht. T2 - Nationales Forum für Fernerkundung und Copernicus 2024 CY - Berlin, Germany DA - 19.03.2024 KW - Maschinelles Lernen KW - Waldbrand KW - Geoinformatik KW - Fernerkundung PY - 2024 AN - OPUS4-59840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi T1 - Applying experimental determined kinetic parameters to the simulation of vegetation fire in the Fire Dynamics Simulator N2 - Although intense wildfire research has been done in the US and in Australia, it cannot be transferred directly to the situation in Europe as the local vegetation has a significant influence on the fire spread. The EU-funded project TREEADS and the so-called German pilot within the project are concentrating on wildfire in Europe. Extensive experimental research is done on local vegeta-tion in Germany and the experimental results are used to adjust the Fire Dynam-ics Simulator (FDS) to local vegetation as a fuel in the calculations. The particle model and the boundary fuel model are developed for the simulation of forest fires. Both models require the kinetic input for the dehydration, pyrolysis, and char oxidation process. This three-step simplified model describes the basic fuel combustion kinetic. Most published simulations use the default kinetic input of pine needles from FDS user manual. To adjust the simulation to local vegetation, the corresponding kinetic parame-ters have been experimental investigated. Samples of pine needles, moss and other falling leaves were collected, air dried and grinded into powder. The TG analysis of all these samples were done under different heating rate of 5, 10 and 20K/min. The activation energy and the corresponding pre-exponential factor were calcu-lated. The results show that fire spread depends significantly on the vegetation and comparison with small scale experiments show good agreement using the new kinetic parameters. The new model is applied to a larger scenario and will be compared to the results of large-scale experiments for further validation of the model. T2 - Wood and Fire Safety 2024 CY - Štrbské Pleso, Slovakia DA - 12.05.2023 KW - Simulation KW - Forest KW - FDS KW - Fire Dynamics Simulator KW - Kinetic parameters KW - Vegetation fire PY - 2024 AN - OPUS4-60256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi T1 - Experimental investigating flame propagation of vegetation fire in different scales N2 - Since we are facing more extreme weathers, the occurrence of wildfire has also increased accordingly. The EU project TREEADS aims to adopt a holistic forest fire management and an adaptive, collaborative governance approach based on the deployment of a new systemic and technological framework covering all three interconnected fire management stages: prevention & preparedness, detection & response, and restoration & adaptation. As part of the task in the so-called German pilot, numerical simulations are performed to investigate the influencing factors for vegetation fires with fire dynamics simulator (FDS). The characteristics of vegetation are strongly related to the local weather and ecosystem. The investigation of the fire behavior of vegetation must be based on the local vegetation in Germany. Thus, the flame propagation of typical vegetation in Germany (pine needles, oak leaves, European beech leaves etc.) was investigated in small scale and medium scale experiments. These results are used as validation case studies for the further simulations. T2 - NFSD Nordic Fire and Safety Days CY - Lund, Sweden DA - 18.06.2024 KW - Vegetation fire KW - Flame propagation KW - Vegetation in Germany KW - SBI-test KW - Wildfire PY - 2024 UR - https://ri.diva-portal.org/smash/record.jsf?pid=diva2%3A1869356&dswid=6005 AN - OPUS4-60632 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi A1 - Hofmann-Böllinghaus, Anja T1 - TREEADS - Experimente und numerische Simulation zur Brandausbreitung von Vegetationsbränden N2 - Um die Ausbreitungsmechanismen von Vegetationsbränden und besonders bei Bodenbränden besser zu verstehen, wurden die Einflussfaktoren auf die Brandausbreitung näher untersucht. Da die Brandausbreitung auch in starkem Maße von der lokalen Vegetation abhängt, war eine Charakterisierung der lokalen Vegetation und der Bodenverhältnisse wichtig. Die Wetterverhältnisse spielen einerseits im Vorfeld des Brandes durch längere Dürreperioden als auch während des Brandes, z.B. durch den Windeinfluss, zusätzlich eine große Rolle. Durch die numerische Simulation kann eine größere Variation der Einflussgrößen abgebildet werden als durch die zeitlich und finanziell begrenzten experimentellen Möglichkeiten. Für die Berechnungen wird der Fire Dynamic Simulators (FDS) mit dem Paket WFDS verwendet. Dadurch kann mit einem vereinfachten 3-Phasen-Reaktionskinetikmodell, bestehend aus Dehydrierung, Pyrolyse, Kohleoxidation, die Ausbreitung von Vegetationsbränden verschiedener Waldbodenarten untersucht werden. Es wurden dazu 6 typische Pflanzenarten und Bodenproben aus Kiefern-, Buchen und Eichenbeständen ausgewählt. Die gesammelten Waldbodenproben wurden alle hinsichtlich des Wassergehalts, des organischen Gehalts, der Packungsdichte, der Dichte und der statistisch ermittelten Pflanzenartenverteilung charakterisiert. Das kinetische Abbrandverhalten wurde durch Thermogravimetrische Analyse (TGA) untersucht. Alle diese Daten wurden als Eingabeparameter für die Simulation verwendet. Die numerischen Simulationen werden mit Experimenten im kleinen, mittleren und Real-Maßstab validiert. T2 - 70. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes CY - Magdeburg, Germany DA - 06.05.2024 KW - Waldbrand KW - Simulation KW - FDS PY - 2024 AN - OPUS4-60257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klippel, Andrea A1 - Hofmann-Böllinghaus, Anja A1 - Heydick, Lukas A1 - Piechnik, Kira A1 - Wu, Hongyi A1 - Köhler, Florian T1 - Experimental Analysis of Fire Behaviour in Pine Forests and Agricultural Fields Large Scale Tests conducted within the TREEADS Project N2 - In two large-scale tests fire spread mechanisms in vegetation ground fires were studied in a pine forest and a crop field. Both fires were ignited with a drip torch using a gasoline-diesel mix. The tests were part of the European TREEADS project, specifically in the research work from the German Pilot focusing on Saxony-Anhalt and Brandenburg. These regions are known for dry, sandy soil, with pine trees covering approximately 73% of forested areas in Brandenburg and 48% in Saxony-Anhalt. The results of both experiments make a substantial contribution to optimizing extinguishing methods and strategies and enhancing a continued wildfire research in Germany. The test areas included a 16 x 22 m plot in a Saxony-Anhalt pine forest and a 20 x 100 m plot on a crop field, with fires ignited along a line using a drip torch at both locations. Fire spread was monitored with video and IR cameras mounted on a drone. In the pine forest, 96 thermocouples and gas sensors were attached to trees and a mobile FTIR spectrometer was used for real-time gas measurements. A protective strip was created around the test area using a soil tiller and fire-retardant foam to prevent uncontrolled fire spread. The experiment showed a consistent temperature rise as the fire was ignited and spread. Thermocouple data captured detailed thermal dynamics, while tree-mounted gas sensors recorded significant fluctuations in combustible gases. Real-time gas spectra from the FTIR spectrometer enabled precise smoke analysis. Conducted in stable weather - 23°C, light wind, low soil moisture—this setup improved reproducibility, with a weather station monitoring temperature, humidity and wind conditions to assess fire-environment interactions. After ignition process the fire showed a slow spread and distinct combustion phases. Smouldering was more pronounced in areas with grasses and deadwood, highlighting vegetation-specific burn patterns critical to wildfire research. The experiment showed numerous smouldering and burning spots, with flames igniting and extinguishing repeatedly. However, flame height did not exceed half a meter. Due to substantial smoke production, visibility in the test field was limited and team members wore respirators to collect specific smoke gases such as benzene and formaldehyde for analysis. Field measurements showed flame temperatures exceeding 500°C. Toxic smoke gas concentrations of up to 238 ppm CO were measured, although precise gas capture appeared challenging due to wind turbulence. The second large-scale area in Nauen, a cut wheat field (stubble height approx. 30 cm) was burned, with fire spreading across approximately 700 m². A 20 m ignition line directed flames with the wind. Fire spread was observed using drones equipped with IR cameras. Experiments demonstrated how unpredictable and challenging it is to measure large outdoor fires. To enable a comprehensive theoretical and numerical description of fire dynamics in wildfires, it is essential to conduct further large-scale experiments. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Wildfire PY - 2025 SP - 1435 EP - 1444 PB - Interscience CY - London AN - OPUS4-63926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea A1 - Piechnik, Kira T1 - Vehicle fires: significant fire hazard in transportation infrastructure N2 - The zeolitic imidazole framework-8 (ZIF-8) is a crystalline porous material that has been widely employed as template to fabricate porous nitrogen-doped carbons with high microporosity via thermal treatment at high temperatures. The properties of the carbon scaffold are influenced by the pore structure and chemical composition of the parent ZIF. However, the narrow pore size distribution and microporous nature from ZIF-8 often results in low mesopore volume, which is crucial for applications such as energy storage and conversion. Here we show that insertion of N-heterocyclic amines can disrupt the structure of ZIF-8 and dramatically impact the chemical composition and pore structure of the nitrogen-doped carbon frameworks obtained after high-temperature pyrolysis. Melamine and 2,4,6-triaminopyrimidine were chosen to modify the ZIF-8 structure owing to their capability to both coordinate metal ions and establish supramolecular interactions. Employing a wide variety of physical characterization techniques we observed that melamine results in the formation of a mixed-phase material comprising ZIF-8, Zn(Ac)6(Mel)2 and crystallized melamine, while 2,4,6-triaminopyrimidine induces the formation of defects, altering the pore structure. Furthermore, the absence of heterocyclic amine in the ZIF-8 synthesis leads to a new crystalline phase, unreported to date. The thermal conversion of the modified ZIFs at 1000 °C leads to nitrogen-doped carbons bearing Zn moieties with increased surface area, mesopore volume and varying degree of defects compared to ZIF-8 derived carbon. This work therefore highlights both the versatility of heterocyclic amines to modify the structure of framework materials as well as their role in tuning pore structure in nitrogen-doped carbons, paving the way to targeted design of high-performance electrodes for energy storage and conversion. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Vehicle fires PY - 2025 SP - 1291 EP - 1298 PB - Interscience CY - London AN - OPUS4-63924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR ED - Manzello, Samuel L. ED - Hofmann-Böllinghaus, Anja T1 - Special issue on wildland-urban interface (WUI) fires N2 - Special issue on wild-urban interface (WUI) fires with 25 papers in total. Contributed papers came from all across the globe and included Algeria, Australia, Brazil, China, France, Germany, Japan, Poland, Norway, New Zealand, Spain, Sweden, and the United States of America. The global coverage of contributed papers demonstrated the growing nature of the WUI fire problem. KW - Wildfire PY - 2025 UR - https://onlinelibrary.wiley.com/toc/10991018/2025/49/5 SN - 1099-1018 SN - 0308-0501 VL - 49 IS - 5 SP - 507 EP - 846 PB - Wiley CY - New York, NY AN - OPUS4-63992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechnik, Kira A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea T1 - Characterization and assessment of smoke emissions from smouldering forest fires: a combined experimental and numerical approach N2 - This article builds upon the publication "Comprehensive Laboratory Study on Smoke Gases During the Thermal Oxidative Decomposition of Forest and Vegetation Fuels"1 in Fire and Materials, 2024, summarizing the experimental methodology and highlighting key findings. The study investigates the gas-phase composition of smoke emissions from forest and vegetation fuels. The study focuses on pine-dominated ecosystems in Eastern Germany, with the objective of improving the understanding of wildfire-related gaseous emissions, as a contribution to the German pilot activities within the EU Project TREEADS. Using a modified DIN tube furnace in a bench-scale setup, the investigation centers on gaseous emissions from five trees and two ground cover species, explicitly excluding particulate matter. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, UK DA - 30.06.2025 KW - Wildfire PY - 2025 SP - 288 EP - 294 PB - Interscience CY - London AN - OPUS4-63999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klippel, Andrea A1 - Hofmann-Böllinghaus, Anja T1 - Experimental Analysis of Fire Behaviour in Pine Forests and Agricultural Fields Large Scale Tests conducted within the TREEADS Project N2 - In two large-scale tests fire spread mechanisms in vegetation ground fires were studied in a pine forest and a crop field. Both fires were ignited with a drip torch using a gasoline-diesel mix. The tests were part of the European TREEADS project, specifically in the research work from the German Pilot focusing on Saxony-Anhalt and Brandenburg. These regions are known for dry, sandy soil, with pine trees covering approximately 73% of forested areas in Brandenburg and 48% in Saxony-Anhalt. The results of both experiments make a substantial contribution to optimizing extinguishing methods and strategies and enhancing a continued wildfire research in Germany. The test areas included a 16 x 22 m plot in a Saxony-Anhalt pine forest and a 20 x 100 m plot on a crop field, with fires ignited along a line using a drip torch at both locations. Fire spread was monitored with video and IR cameras mounted on a drone. In the pine forest, 96 thermocouples and gas sensors were attached to trees and a mobile FTIR spectrometer was used for real-time gas measurements. A protective strip was created around the test area using a soil tiller and fire-retardant foam to prevent uncontrolled fire spread. The experiment showed a consistent temperature rise as the fire was ignited and spread. Thermocouple data captured detailed thermal dynamics, while tree-mounted gas sensors recorded significant fluctuations in combustible gases. Real-time gas spectra from the FTIR spectrometer enabled precise smoke analysis. Conducted in stable weather - 23°C, light wind, low soil moisture—this setup improved reproducibility, with a weather station monitoring temperature, humidity and wind conditions to assess fire-environment interactions. After ignition process the fire showed a slow spread and distinct combustion phases. Smouldering was more pronounced in areas with grasses and deadwood, highlighting vegetation-specific burn patterns critical to wildfire research. The experiment showed numerous smouldering and burning spots, with flames igniting and extinguishing repeatedly. However, flame height did not exceed half a meter. Due to substantial smoke production, visibility in the test field was limited and team members wore respirators to collect specific smoke gases such as benzene and formaldehyde for analysis. Field measurements showed flame temperatures exceeding 500°C. Toxic smoke gas concentrations of up to 238 ppm CO were measured, although precise gas capture appeared challenging due to wind turbulence. The second large-scale area in Nauen, a cut wheat field (stubble height approx. 30 cm) was burned, with fire spreading across approximately 700 m². A 20 m ignition line directed flames with the wind. Fire spread was observed using drones equipped with IR cameras. Experiments demonstrated how unpredictable and challenging it is to measure large outdoor fires. To enable a comprehensive theoretical and numerical description of fire dynamics in wildfires, it is essential to conduct further large-scale experiments. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Wildfire KW - Large scale tests PY - 2025 AN - OPUS4-63923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Simon T1 - Predicting Wildfire Propagation in Europe, the Middle East and North Africa using Convolutional Neural Networks with an adjusted Dataset N2 - Wildfires pose a significant threat to ecology, economy, and human lives alike. Droughts and heat waves fueled many fire occurrences in the last years, and the ongoing climate change increases the risk of larger, more devastating events. As part of the TREEADS project, funded by Horizon 2020 (EU), we are developing a wildfire propagation model, which is an important part of possible counter measures to support decision makers and firefighters in their actions against uncontrolled fire spread. With recent advances, machine learning became applicable for wildfire propagation modelling. Once the time-consuming training process is finished, predictions are fast, even on devices with low computational power. On the downside, large datasets are crucial to train robust models, but temporally accurate propagation data of real fire occurrences are sparse. To solve this problem, we reconstructed wildfire propagation in 12-hour intervals for over 5500 events with varying sizes and durations in Europe, the Middle East, and North Africa. Thereto, burned area polygons from the European Forest Fire Information System (EFFIS) database were combined with active fire detection points from the Visible Infrared Imaging Radiometer Suite (VIIRS). The fire spread was reconstructed sequentially according to the revisiting times of VIIRS. This data was coupled with meteorological information from the ERA5 reanalysis product and surface information derived from Sentinel-2, as well as TanDEM-X remote sensing data. The aggregated dataset was then used to build a deep-learning convolutional neural network that captures meteorological effects, elevation, and vegetation on wildfire propagation. To account for the sequentially updated weather data from ERA5, long short-term memory (LSTM) with self-attention was included. In summary, we have constructed a novel wildfire propagation dataset suitable for machine learning purposes and developed a convolutional LSTM network for rapid prediction of fire spread. T2 - AGU24 CY - Washington D.C., USA DA - 09.12.2024 KW - Wildfire KW - Deep Learning KW - Convolutional Neural Network (CNN) KW - Remote Sensing PY - 2024 AN - OPUS4-64767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peters, Simon A1 - Pittrich, Tim A1 - Stelzner, Ludwig A1 - Weise, Frank A1 - Meschke, Günther T1 - Concretes containing blended-cements with reduced carbon-dioxide emissions: A chemo-thermo-hygro-mechanical model for elevated temperatures N2 - A comprehensive analysis aimed at understanding and assessing the high-temperature behavior of concretes containing blended cements (CEM III/A, CEM II/B-Q, and CEM IV), characterized by low carbon-dioxide emissions (during clinker’s production) is necessary to reliably model the damage in the concrete, thermal spalling included. To this purpose, a numerical chemo-thermo-hygro-mechanical model is formulated, to investigate – among other phenomena – heat transmission and pore pressure for different aggregate types. Based on an available hydration model, a dehydration model is established to numerically investigate the evolution of dehydration and porosity at elevated temperatures. Based on the properties of concrete and cement constituents on multiple scales, an analytical homogenization process is proposed to predict the thermal conductivity of the concrete. This process is later validated and implemented into a macroscopic modeling framework. Chemo-thermo-hygro-mechanical analyses show that the dehydration characteristics of blended low carbon-dioxide release cements may increase pore pressure in the concrete by up to 13% compared to the concrete containing ordinary Portland cement. In addition, aggregates exhibiting high thermal conductivity may contribute to a further increase (even more than 35%) in pore pressure compared to aggregates with low thermal conductivity. Last but not least, the proposed model provides the basis for the reduction of the number of the parameters commonly required in the chemo-thermo-hygro-mechanical modeling of cementitious materials. KW - Concrete at high temperature KW - Dehydration KW - Multiscale modeling KW - Thermal conductivity KW - Chemo-hygro-thermal analysis KW - Micromechanics PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-635894 DO - https://doi.org/10.1016/j.cemconcomp.2025.106163 SN - 0958-9465 VL - 163 SP - 1 EP - 17 PB - Elsevier CY - Amsterdam AN - OPUS4-63589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi T1 - Untersuchung von Brandausbreitungsmechanismen bei Waldbränden N2 - Das EU Projekt TREEADS „A Holistic Fire Management Ecosystem for Prevention, Detection and Restoration of Environmental Desasters” beschäftigt sich mit der Erforschung der drei Phasen „Prävention und Bereitschaft“, „Detektion und Reaktion“ und „Aufforsten und Anpassen“ der Waldbrandverhütung. Im Projekt gibt es acht ausgewiesene Pilotregionen, in denen Deutschland auch mit einer Pilotregion in Sachsen-Anhalt bzw. in Brandenburg vertreten ist. Unsere Arbeit auf Charakterisierung des Waldbodens und numerische Simulation wird vorgestellt. T2 - vfdb-Jahresfachtagung 2023 CY - Münster, Germany DA - 15.05.2023 KW - Waldbrand KW - Klimawandel KW - Charakterisierung des Waldbodens KW - Numerische Strömungsmechanik PY - 2023 AN - OPUS4-57621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Waldbrandforschung im EU-Projekt TREEADS N2 - Die Präsentation gibt einen Überblick über die Arbeiten im German Pilot des EU-Projekts TREEADS. Es werden klein-, mittel- und großskalige Versuche an Waldboden mit einheimischer Vegetation durchgeführt. Begleitend werden numerische Untersuchungen durchgeführt, die eine Variation der Parameter, wie Bodenfeuchte, Temperaturen und Wind über die Experimente hinaus erlauben. Die gemessenen Materialparameter dienen als Input für die numerischen Berechnungen. Die numerischen Modelle werden mit den mittel- und großskaligen Experimenten validiert. T2 - Magdeburger-Köthener Brandschutz- und Sicherheitstagung CY - Magdeburg, Germany DA - 14.03.2024 KW - Waldbrand PY - 2024 AN - OPUS4-59897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gnutzmann, Tanja T1 - Brandschutz für Kulturgut: Das Projekt BRAWA N2 - Brände zerstören immer wieder wichtige Kulturgüter und gefährden nationales Kulturerbe. Das Projekt BRAWA erarbeitet neue Strategien und innovative Technologien, um die Brandsicherheit historischer Gebäude zu erhöhen. Dabei basiert das Konzept auf der Vernetzung von Sensoren, die bereits beim Auftreten bestimmter Gase in der Frühphase der Brandentstehung Alarm auslösen. Durch ein neuartiges Helferkonzept soll eine frühe Branderkennung und -bekämpfung ermöglicht werden. T2 - BMBF Innovationsforum "Zivile Sicherheit" 2022 CY - Berlin, Germany DA - 03.05.2022 KW - Brandschutz KW - Kulturgut KW - Historische Gebäude KW - Branddetektion KW - Sensornetzwerk PY - 2022 AN - OPUS4-54828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Europäische Harmonisierung von Brandstatistiken für Wohngebäude N2 - Das EU Projekt EU FireStat SI2.830108, das vom Europäischen Parlament finanziert und von der DG GROW der Europäischen Kommission in Auftrag gegeben wurde, hat aufgearbeitet, welche Terminologie in den europäische Mitgliedsstaaten verwendet wird und die von den Mitgliedstaaten erhobenen Daten über Gebäudebrände zu analysieren. Dabei wurden die Schwierigkeiten bei der Erfassung und die Unterschiede bei der Auslegung ermittelt und eine gemeinsame Terminologie sowie eine Methode zur Erfassung der erforderlichen Daten vorgeschlagen. Folgende Schwerpunkte wurden bearbeitet: Zunächst erfolgte eine Diagnose von Terminologie-, Datenerhebungs- und Auslegungsproblemen, Erhebung der Terminologie und der Datenerfassung, Identifizierung der für die Entscheidungsfindung benötigten Daten, Analyse der Methoden zur Datenerhebung Definition einer gemeinsamen Terminologie, Methodik der Kosten-/Nutzenbewertung zur Unterstützung politischer Entscheidungen, Fallstudie zur Anwendung der Methode der Kosten-/Nutzenbewertung, Beschreibung einer zukünftigen Datenerhebungsmethode. Das Ergebnis des Projekts ist eine Empfehlung, welche Daten in den Mitgliedstaaten erhoben werden sollten, um wissensbasierte Entscheidungen in Bezug auf den Brandschutz zu ermöglichen. Damit wird die Grundlage für Maßnahmen und Initiativen geschaffen, die den Brandschutz und die Brandverhütung der Mitgliedstaaten unterstützen, so dass knappe Ressourcen gezielt eingesetzt werden können. T2 - 69. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes CY - Münster, Germany DA - 15.05.2023 KW - Statistik PY - 2023 SN - 976-3-936050-36-3 VL - 2023 SP - 391 EP - 401 PB - VdS CY - Köln AN - OPUS4-57573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Hofmann-Böllinghaus, Anja ED - Fouad, N. A. T1 - Brandsicherheit von Bussen N2 - Grundsätzlich lässt sich sagen, dass Busbrände relativ häufig auftreten, auch wenn sich das im öffentlichen Bewusstsein nicht unbedingt widerspiegelt. In Deutschland gibt es keine einheitliche Brandstatistik, nach einer eigenen Internetrecherche brennt im Schnitt aber etwa an jedem zweiten Tag ein Bus in Deutschland. Auch eine interne Umfrage eines Verbands von Busbetreibern bestätigte die Häufigkeit von Bränden: Ungefähr 1 Prozent der Busse hatte im Jahr einen Brandfall – wobei hier auch kleinere Ereignisse mitgezählt wurden. Die britische Statistik bestätigt diese Zahlen. Sie führt für die letzten 10 Jahre ca. 11900 Brände pro Jahr in Fahrzeugen, davon ca. 315 pro Jahr in Bussen auf. Brände in Bussen sind für die Passagiere eine große Gefährdung, da sie sich meist sehr schnell ausbreiten. Zwei schwere Brände ereigneten sich in Deutschland 2008 und 2017. KW - Bussicherheit KW - Vorschriften KW - Brandprüfungen PY - 2021 SN - 978-3-433-03295-4 VL - 2021 SP - 386 EP - 398 PB - Ernst und Sohn CY - Berlin AN - OPUS4-53090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Hofmann-Böllinghaus, Anja A1 - Brandt, J. ED - Troitzsch, J. ED - Antonatus, E. T1 - Motor Vehicles N2 - The amount of plastic and synthetic materials is still growing in all sectors of everyday life. In the automotive industry, plastic materials are now widely used in vehicles because of their excellent mechanical properties and their light weight combined with low production costs. However, plastic materials are flammable and can generate toxic smoke gases which can endanger passengers’ lives in the event of fire. KW - Transport KW - Bus fire KW - Safety PY - 2021 SN - 978-1-56990-762-7 VL - 2021 SP - 537 PB - Hanser CY - München ET - 4 AN - OPUS4-53094 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja T1 - Feuer und Rauchausbreitung in Busdepots, Brandverhalten von Bussen N2 - Präsentation zur Problemen der Brandsicherheit bei Busdepots und Empfehlungen zur Verbesserung der Brandsicherheit. T2 - Brandschutz von Bus-Betriebshöfen CY - Cologne, Germany DA - 02.05.2023 KW - Brandschutz PY - 2023 AN - OPUS4-57416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi A1 - Hofmann-Böllinghaus, Anja T1 - TREEADS - Experimente und numerische Simulation zur Brandausbreitung von Vegetationsbränden N2 - Um die Ausbreitungsmechanismen von Vegetationsbränden und besonders bei Bodenbränden besser zu verstehen, wurden die Einflussfaktoren auf die Brandausbreitung näher untersucht. Da die Brandausbreitung auch in starkem Maße von der lokalen Vegetation abhängt, war eine Charakterisierung der lokalen Vegetation und der Bodenverhältnisse wichtig. Die Wetterverhältnisse spielen einerseits im Vorfeld des Brandes durch längere Dürreperioden als auch während des Brandes, z.B. durch den Windeinfluss, zusätzlich eine große Rolle. Durch die numerische Simulation kann eine größere Variation der Einflussgrößen abgebildet werden als durch die zeitlich und finanziell begrenzten experimentellen Möglichkeiten. Für die Berechnungen wird der Fire Dynamic Simulators (FDS) mit dem Paket WFDS verwendet. Dadurch kann mit einem vereinfachten 3-Phasen-Reaktionskinetikmodell, bestehend aus Dehydrierung, Pyrolyse, Kohleoxidation, die Ausbreitung von Vegetationsbränden verschiedener Waldbodenarten untersucht werden. Es wurden dazu 6 typische Pflanzenarten und Bodenproben aus Kiefern-, Buchen und Eichenbeständen ausgewählt. Die gesammelten Waldbodenproben wurden alle hinsichtlich des Wassergehalts, des organischen Gehalts, der Packungsdichte, der Dichte und der statistisch ermittelten Pflanzenartenverteilung charakterisiert. Das kinetische Abbrandverhalten wurde durch Thermogravimetrische Analyse (TGA) untersucht. Alle diese Daten wurden als Eingabeparameter für die Simulation verwendet. Die numerischen Simulationen werden mit Experimenten im kleinen, mittleren und Real-Maßstab validiert. T2 - 70. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes CY - Magdeburg, Germany DA - 06.05.2024 KW - Waldbrand KW - Simulation KW - FDS PY - 2024 SN - 978-3-936050-38-7 SP - 321 EP - 336 PB - VdS CY - Köln ET - 2 AN - OPUS4-60258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Forschung zum Thema Feuer an der BAM N2 - Feuer und deren Auswirkung stellen ein Querschnittsthema über die Aktivitätsfelder der BAM dar. Schwerpunkte stellen dabei Brände in Gebäuden, Industrieanlagen und Lagerräumen, der Vegetation, an Fahrzeugen und Tanks sowie Brände im Zusammenhang mit neuen Energieträgern dar. Im Vortrag werden die einzelnen Themen und exemplarische für deren Erforschung nutzbare Infrastruktur vorgestellt. T2 - Transfer on Fire 2 CY - Luckenwalde, Germany DA - 10.07.2025 KW - Feuer KW - Brandlasten PY - 2025 AN - OPUS4-63686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hofmann-Böllinghaus, Anja A1 - Anderson, J. T1 - Editorial: Special issue facades N2 - Facade fires are of growing concern worldwide. Severe facade fires in different parts of the world as well as activities in many countries regarding the testing of facades show the urgency of the fire safety challenges in façade fires. The need for knowledge and a wide Archive of work in this area has become evident after recent incidents which involved extensive facade fires. These include the tragic fires in Dubai and Grenfell Tower in 2017 in the United Kingdom. In many cases, the widespread live news coverage of the events and size of These fires has emphasized the need for progress in the understanding of the processes involved in these fires and put pressure upon the fire safety engineering community to find effective solutions. KW - Facade fire PY - 2021 DO - https://doi.org/10.1002/fam.3001 SN - 0308-0501 SN - 1099-1018 VL - 45(5) IS - Special issue: Facade fire safety SP - 585 PB - Wiley CY - Oxford AN - OPUS4-53093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi T1 - Influence of local vegetation on ignition and fire spread of vegetation fires-Experimental and numerical approach N2 - To investigate the influence of local vegetation, it goes through two aspects. One is laboratory study, the local vegetation samples were collected and tested for the thermal properties, such as activation energy, heat content and reaction kinetic of pyrolysis and dehydration. At the same time, small and medium scale combustion experiments were conducted to investigate the burning behavior. The other aspect is using the thermal properties as the input parameters for the development of numerical simulation in the computational fluid dynamics (CFD) tool. These models were then be validated with the combustion experiments, as a baseline for the further scaling up of the models, in order to investigate how the parameters influencing the fire spread in a large-scale case numerically. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Wildfire PY - 2025 AN - OPUS4-63933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tóth, Péter A1 - Hofmann‐Böllinghaus, Anja A1 - Dumont, Fabien A1 - Anderson, Johan A1 - Sjöström, Johan A1 - Bergius, Mikael A1 - Chiva, Roman A1 - Lalu, Octavian T1 - Finalisation of the European Approach to Assess the Fire Performance of Facades—Brief Information on the Outcome of the Project N2 - This research was conducted within the framework of project SI2.825082, funded by the European Commission—DG GROW. The project's objective was to finalise a European approach for assessing the fire performance of façades under medium and large fire exposure conditions. The national standards BS 8414‐1:2020/BS 8414‐2:2020 and DIN 4102‐20:2017 served as the foundation for developing the new assessment method. As part of the project, a theoretical round robin, initial testing activities and a large‐scale experimental round robin were carried out. The theoretical round robin aimed to examine how different laboratories interpreted the preliminary assessment method. Subsequently, the initial testing phase explored the design of the fire source, combustion chamber and secondary opening. The experimental round robin involved testing four façade systems across three laboratories using the assessment method documents, resulting in 12 tests for medium‐scale and 12 for large‐scale exposure—24 tests in total. These tests provided data to develop a calibration scheme and define appropriate performance criteria for classification. In this paper, the representatives of the project consortium summarise the research process and outline the proposed testing and evaluation methodology, which is intended to form the foundation of a future European testing standard for façades. The article also highlights the need for further research to establish rules for extended application of test results. KW - Facade KW - Testing PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654731 DO - https://doi.org/10.1002/fam.70042 SN - 0308-0501 SP - 1 EP - 27 PB - John Wiley & Sons Ltd. AN - OPUS4-65473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neugum, Tim T1 - Application of the substructure method to assess the fire resistance of thermally restrained columns N2 - Usually, the fire resistance of load-bearing structural elements is determined by single members testing. A mechanical load is applied to the member in a force-controlled manner and is maintained constant throughout the fire test. After applying the mechanical load, the thermal exposure starts according to the ISO 834 fire curve. In this conventional test method, no interaction between the tested member and the entire building structure is considered. In buildings, the surrounding structure can restrain the thermal expansion of a member in case of fire. This may have both positive and negative effects on the fire resistance of this structural element. Several years ago, the Institute for Sustainability and Innovation in Structural Engineering (ISISE) at the University of Coimbra in Portugal and the Bundesanstalt für Materialforschung und -prüfung (BAM) in Germany carried out fire tests on circular and square steel-reinforced concrete columns with restrained thermal expansion. BAM´s column test furnace allows the specimen to be subjected to thermal exposure and mechanical loading simultaneously. In addition, this device has a substructure test module, which can also provide restrained test conditions. In an ongoing research project at BAM and Technische Universität Braunschweig, the effect of restrained test conditions on the behaviour of steel-reinforced columns under fire exposure is further investigated. The comprehensive test programme of the project includes 14 steel-reinforced concrete columns. Several parameters are varied, i.e., the stiffness representing the surrounding structure of the column, the load level, the eccentricity of the applied load, and the fire exposure to be used. The selection of parameters is based on a real building case study. Furthermore, material tests are carried out to characterize the mechanical properties of the concrete at elevated temperatures, to be included in a numerical simulation. T2 - Vortrag an der Helmut-Schmidt-Universität der Bundeswehr in Hamburg CY - Hamburg, Germany DA - 27.01.2026 KW - Fire tests KW - Steel-reinforced concrete columns KW - Thermal constraint KW - Substructure method KW - Numerical simulation PY - 2026 AN - OPUS4-65431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tabaka, Weronika A1 - Timme, Sebastian A1 - Lauterbach, Tobias A1 - Medina, L. A1 - Berglund, L. A. A1 - Carosio, F. A1 - Duquesne, S. A1 - Schartel, Bernhard T1 - Bench-scale fire stability testing - Assessment of protective systems on carbon fibre reinforced polymer composites N2 - Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) usually demands intermediate-scale or full-scale testing. A bench-scale test is presented as a practicable and efficient method to assess how different fire protective systems improve the structural integrity of CFRPs during fire. The direct flame of a fully developed fire was applied to one side of the CFRP specimen, which was simultaneously loaded with compressive force. Three different approaches (film, non-woven, and coatings) were applied: paper with a thickness in the range of μm consisting of cellulose nanofibre (CNF)/clay nanocomposite, nonwoven mats with thickness in the range of cm and intumescent coatings with a thickness in the range of mm. The uncoated specimen failed after just 17 s. Protection by these systems provides fire stability, as they multiply the time to failure by as much as up to 43 times. The reduced heating rates of the protected specimens demonstrate the reduced heat penetration, indicating the coatings’ excellent heat shielding properties. Bench-scale fire stability testing is shown to be suitable tool to identify, compare and assess different approaches to fire protection. KW - Fire stability KW - Bench-scale fire resistance KW - Carbon fibre reinforced polymer KW - Protective coatings PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-532401 DO - https://doi.org/10.1016/j.polymertesting.2021.107340 SN - 0142-9418 SN - 1873-2348 VL - 102 SP - 7340 PB - Elsevier CY - Amsterdam AN - OPUS4-53240 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jauregui Rozo, Maria A1 - Sunder, S. A1 - Tabaka, Weronika A1 - Klaffke, Benjamin A1 - Ruckdäschel, H. A1 - Schartel, Bernhard T1 - Unveiling aluminum diethyl phosphinate dual identity: Transfer from epoxy resins to glass fiber-reinforced composites N2 - This study examines the transfer of the flame-retardant aluminum diethyl phosphinate (AlPi) from epoxy resins to composites and the impact of AlPi on fire behavior and fire stability. Further, the effects of different particle sizes and the addition of zinc hydroxy stannate (ZHS) and inorganic silicate (InSi) are investigated. The research provides a detailed analysis of the fire behavior, fire stability, pyrolysis, flame-retardant modes of action, and flame retardancy index. Interestingly, the particle sizes did not significantly affect the flammability, fire behavior, or fire stability in the systems investigated. AlPi acts primarily in the gas phase, releasing phosphorus that yields flame inhibition. Adding glass fibers (GFs) to the epoxy resin boosts the flame retardancy in the condensed phase, reducing the heat release rate (HRR), total heat release (THR), and peak heat release rate (PHRR) by about 60%. This improvement is largely due to replacing fuel and forming a protective layer during burning. Despite the differences between thermoset and composite, the study demonstrates an effective transfer of flame-retardant properties from epoxy resins to fiber-reinforced composites, significantly enhancing the flame retardancy performance in both material systems. KW - Aluminum diethyl phosphinate KW - Epoxy resins KW - Fire behavior KW - Fire stability KW - Gas-phase active KW - Glass fiber-reinforced composites KW - Particle sizes PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643013 DO - https://doi.org/10.1002/pc.29911 SN - 1548-0569 SN - 0272-8397 VL - 46 IS - 14 SP - 12981 EP - 12999 PB - Wiley AN - OPUS4-64301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tabaka, Weronika A1 - Meinel, Dietmar A1 - Schartel, Bernhard T1 - Sacrifice Few to Save Many: Fire Protective Interlayers in Carbon- Fiber-Reinforced Laminates N2 - The fire protection of carbon-fiber-reinforced polymer (CFRP) laminates often relies on flame-retardant coatings, but in some applications, their efficacy may diminish upon direct fire exposure due to rapid pyrolysis. This study introduces an innovative approach by integrating protective interlayers within the laminate structure to enhance the fire resistance. Various materials, including ceramic composite WHIPOX, titanium foil, poly(etherimide) (PEI) foil, basalt fibers, rubber mat, and hemp fibers, were selected as protective interlayers. These interlayers were strategically placed within the laminate layout to form a sacrificial barrier, safeguarding the integrity of the composite. Bench-scale fire resistance tests were conducted, where fire (180 kW/m2) was applied directly to the one side of the specimen by a burner while a compressive load was applied at the same time. Results indicate significant prolongation of time to failure for CFRP laminates with protective interlayers, which is up to 10 times longer. This innovative approach represents a potential advance in fire protection strategies for CFRP laminates, offering improved resilience against fire-induced structural failure. KW - Composites in fire KW - Fire resistance KW - Fire retardant interlayers KW - Laminate design KW - Carbon fibre reinforced PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601943 DO - https://doi.org/10.1021/acsomega.4c01408 SN - 2470-1343 VL - 9 IS - 22 SP - 23703 EP - 23712 PB - ACS AN - OPUS4-60194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tabaka, Weronika T1 - Bench-scale fire stability testing - Protective layers in carbon fibre reinforced polymer laminates N2 - Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) composites usually demands intermediate-scale or full-scale testing. In this study, a bench-scale test is presented as a practicable and efficient method to assess the improvement in structural integrity of CFRP with different protective interlayers during fire. T2 - International Conference on Composite Materials (ICCM23) CY - Belfast, UK DA - 30.07.2023 KW - Fire resistance KW - Bench-scale testing KW - Carbon fibre reinforced polymer composite PY - 2023 AN - OPUS4-58099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard T1 - Small but Great – Multifunctional Graphene in Rubber Nanocomposites N2 - A few layer/multilayer graphene (MLG) with a specific surface area of BET ≥ 250 m2/g is proposed as an efficient multifunctional nanofiller for rubbers. The preparation method, i.e., ultrasonically-assisted solution or latex premixing of master batches followed by conventional two-roll milling, strongly influences the dispersion in the elastomeric matrix and is fundamental for the final properties. When homogenously dispersed, single stacks of only approximately 10 graphene sheets, with an aspect ratio of ca. 35, work at low loadings, enabling the replacement of large amounts of carbon black (CB), an increase in efficiency, and a reduction in filler load. The appropriate preparation yielded nanocomposites in which just 3 phr are sufficient to significantly improve the rheological, curing, gas barrier properties, electrical and thermal conductivity, as well as mechanical properties of different rubbers, as shown for chlorine-Isobutylene-Isoprene rubber (CIIR), nitrile-butadiene rubber (NBR), natural rubber (NR), and styrene-butadiene rubber (SBR).[1-5] 3 phr of MLG tripled the Young’s modulus of CIIR, an effect equivalent to 20 phr of CB. The stronger interactions between MLG and NR or SBR also resulted in a reduction in the elongation at break by 20% and 50%, respectively, while the same parameter was hardly changed for CIIR/MLG and NBR/MLG. CIIR/MLG and NBR/MLG were stiffer but just as defomable than CIIR and NBR. The strong reinforcing effect of 3 phr MLG was confirmed by the increase of greater than 10 Shore A in hardness. MLG reduces gas permeability, increases thermal and electrical conductivities, and retards flammability. We investigated MLG also as a synergist for reducing the aluminium trihydrate loading in flame retardant hydrogenated acrylonitrile-butadiene (HNBR), polybutadiene chloroprene (BR/CR), and chlorosulfonated polyethylene rubber(CSM).[6-8] The higher the nanofiller concentration is, the greater the improvement in the properties. For instance, the permeability decreased by 30% at 3 phr of MLG, 50% at 5 phr and 60% at 10 phr, respectively. Moreover, the MLG nanocomposites improve stability of mechanical properties against the effects of weathering. In key experiments an increase in UV-absorption and a pronounced radical scavenging were proved as stabilizing mechanisms. In a nutshell, MLG is an efficient multifunctional nanofiller ready to be used for innovative rubber development. T2 - 34th PDDG Conference CY - Dubrovnik, Croatia DA - 11.06.2023 KW - Graphene KW - Nanocomposites KW - Reinforcement KW - Antioxydant KW - Flame retardant KW - Durability PY - 2023 AN - OPUS4-57693 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard T1 - Multifunctional Elastomer/Graphene Nanocomposites N2 - A few layer/multilayer graphene (MLG) with a specific surface area of BET=250 m2/g is proposed as an efficient multifunctional nanofiller for rubbers. The preparation method, i.e., ultrasonically-assisted solution mixing of master batches followed by two-roll milling, strongly influences the dispersion in the elastomeric matrix and is fundamental for the final properties. When homogenously dispersed, single stacks of only approximately 10 graphene sheets, with an aspect ratio of 34, work at low loadings, enabling the replacement of large amounts of carbon black (CB), an increase in efficiency, and a reduction in filler load. The appropriate preparation yielded nanocomposites in which just 3 phr are sufficient to significantly improve the rheological, curing, gas barrier properties, electrical and thermal conductivity, as well as mechanical properties of different rubbers, as shown for chlorine-Isobutylene-Isoprene rubber (CIIR), nitrile-butadiene rubber (NBR), natural rubber (NR), and styrene-butadiene rubber (SBR). 3 phr of MLG tripled the Young’s modulus of CIIR, an effect equivalent to 20 phr of CB. The stronger interactions between MLG and NR or SBR also resulted in a reduction in the elongation at break by 20% and 50%, respectively, while the same parameter was hardly changed for CIIR/MLG and NBR/MLG. CIIR/MLG and NBR/MLG were stiffer but just as defomable than CIIR and NBR. The strong reinforcing effect of 3 phr MLG was confirmed by the increase of greater than 10 Shore A in hardness. MLG reduces gas permeability, increases thermal and electrical conductivities, and retards flammability, the latter shown by the reduction in heat release rate in the cone calorimeter. We investigated MLG also as a synergist for reducing the aluminium trihydrate loading in flame retardant hydrogenated acrylonitrile-butadiene (HNBR), polybutadiene chloroprene (BR/CR), and chlorosulfonated polyethylene rubber(CSM). The higher the nanofiller concentration is, the greater the improvement in the properties. For instance, the permeability decreased by 30% at 3 phr of MLG, 50% at 5 phr and 60% at 10 phr, respectively. Moreover, the MLG nanocomposites improve stability of mechanical properties against the effects of weathering. In key experiments an increase in UV-absorption and a pronounced radical scavenging were proved as stabilizing mechanisms. In a nutshell, MLG is an efficient multifunctional nanofiller ready to be used for innovative rubber development. T2 - 19th European Polymer Congress, EPF 2022 CY - Prague, Czech Republic DA - 26.06.2022 KW - Graphene KW - Nanocomposite KW - Rubber KW - Elastomer PY - 2022 AN - OPUS4-55196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tabaka, Weronika A1 - Schartel, Bernhard T1 - Less is More: Optimised Fire Performance in Glass Fibre-reinforced Polybutylene Terephthalate Laminates with Concentrated Flame Retardant Top Layer N2 - To achieve optimum fire performance while maintaining mechanical integrity, flame retardants (FR) were strategically concentrated in the surface layer of a two-layer glass fibre-reinforced polybutylene terephthalate (PBT) laminate structure. Three potentially synergistic FR systems were selected to improve the fire performance of glass fibre-reinforced PBT: boehmite (AlOOH) with melamine polyzinc phosphate (MPZnP), aluminium diethyl phosphinates (AlPi) with melamine cyanurate (MC), and expandable graphite (EG) with melamine polyphosphate (MPP). Limited Oxygen Index (LOI) and UL-94 testing highlighted the influence of laminate architecture on flammability. The cone calorimeter results showed that increasing the FR concentration in the top layer significantly reduced both the peak heat release rate (PHRR) and the maximum average rate of heat emission (MARHE), with improvements depending on the specific FR system used. The laminate L-PBT/GF/AlOOH/MPZnP with a 2:2 thickness ratio showed outstanding performance, achieving a 45 % reduction in MARHE compared to composites with uniform FR distribution. This result showcases the superior thermal barrier properties and synergistic behaviour of AlOOH and MPZnP. The fire performance of laminates containing AlPi and MC was strongly influenced by the distribution and concentration of AlPi/MC. The EG/MPP system was found to be highly effective, forming a protective intumescent layer that significantly reduced both HRR and MARHE, demonstrating the effectiveness of strategically concentrating FR in the top layer. KW - Glass fibres KW - PBT KW - Flame retardants KW - Composites KW - Laminates KW - Fire behaviour KW - Flammability PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626381 DO - https://doi.org/10.1016/j.jcomc.2025.100577 SN - 2666-6820 VL - 16 SP - 1 EP - 15 PB - Elsevier CY - Amsterdam AN - OPUS4-62638 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tabaka, Weronika T1 - Bench-scale fire stability testing of carbon fibre reinforced polymer laminates with protective layers N2 - Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) composites usually demands intermediate-scale or full-scale testing. In this study, a bench-scale test is presented as a practicable and efficient method to assess the improvement in structural integrity of CFRP with different protective interlayers during fire. Fire stability is one of the biggest issues of carbon fibre reinforced polymer (CFRP) composites, particularly when they are using in load bearing applications. As soon as the glass transition temperature of polymer matrix (100-200°C) is achieved, the composite loses its structural integrity, what leads to the distortion and failure. The principal fire stability test is based on simultaneous application of fire and mechanical load. Since the carbon fibres can transfer the tensile loads quite well, the compression load is chosen as a required mechanical load for a test. The fire tests were preceded by a static load test at room temperature to determine ultimate failure load. The specimen was loaded with a compression force until the failure load was reached, which was observed as a buckling. For the fire tests, 10% of compression failure load and direct flame of a fully developed fire (heat flux ≈ 180 kW m-2) were applied simultaneously to the specimen, while the time to failure was measured. The possibilities of bench-scale fire stability testing were presented by investigating new types of laminate structures, which exhibit promising flame retardancy and fireproof properties. The new approach of CFRP laminate differs with a protective concept. Every system consists of two different interlayers (titanium foil, thermoplastic foil PEI, ceramic layer WHIPOX, rubber tape Pyrostat, basalt fibres and kenaf fibres), where the one layer constitutes the fireproof protection, that delays the rise of temperature in the rest of laminate, and the second layer provides very good structural connection with carbon fibre layers, thus improves the mechanical integrity of CFRP composite in fire. The time to failure of CFRP composite was 17s. Protective systems significantly enhance the fire stability and increased time to failure by 3 to 10 times. Thicker specimens showed longer resistance time, however CFRP laminate with ceramic layer and titanium foil presented outstanding results and the best performance. The protection with Kenaf and basalt fibres offered a natural fibre solution with also good fire resistance performance Although bench-scale tests are limited with respect to assessing the performance of components and structures, they are valuable in the assessment of different materials concepts. Furthermore, the reduced effort of conducting bench-scale test (lower costs, time, personnel resources) makes it more practical and effective. T2 - 19th European meeting on Fire Retardant Polymeric Materials (FRPM23) CY - Dübendorf, Switzerland DA - 26.06.2023 KW - Fire resistance KW - Carbon fibre reinforced polymer KW - Bench-scale testing PY - 2023 AN - OPUS4-57880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank A1 - An, Q. A1 - Bäßler, Ralph A1 - Hertwig, Andreas A1 - Rehfeldt, Rainer A1 - Hidde, Gundula T1 - Investigation of mechanical stress and B10 exposure on FKM polymer N2 - Biofuels, particularly biodiesel, have gained significant attention as an alternative to traditional fossil fuels in recent years. Unlike diesel, which contains hundreds of compounds, biodiesel only contains a few compounds in the C16-C18 carbon chain. However, the use of biodiesel in automobile and transportation applications can result in problems of degradation or even damage in materials. Among the commonly used polymer materials, fluorocarbon (FKM) shows excellent performance and high stability and compatibility towards oil, diesel, ethanol, and other chemicals. FKM is a family of fluorocarbon-based fluoroelastomer materials, which provide excellent high-temperature and chemical stability compared to other elastomers. As a result, FKM is widely used in chemical processes such as petroleum refining, where it is used for sealings, pumps, and other components. T2 - TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings CY - Orlando, Florida, USA DA - 03.03.2024 KW - B10 exposure KW - FKM polymer PY - 2024 AN - OPUS4-59636 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spitzer, Stefan T1 - Comparative study on standardized ignition sources used for explosion testing N2 - For the determination of safety characteristics of gases, vapors and dusts different types of ignition sources are used in international standards and guidelines. Table 1 compares technical relevant ignition sources with their main features. The paper presents test results of a comparative calorimetric and visual study between four different types of ignition sources. The ignition procedures were analyzed visually with a high-speed camera and electric recordings. In addition to that, the influence of the electrode-orientation, -distance as well as ignition energy on the reproducibility of the exploding wire igniter was tested. The exploding wire is already in use for standardized determination of safety characteristics of gases, first tests on the suitability of the exploding wire igniter for dust testing have been carried out by Scheid et al. Using the exploding wire, the ignition energy can be varied from 2 to 10 000 J (2 x 5 000 J) and thus it could be used for gases, vapors, dusts and hybrid mixtures. Moreover it can be used at high initial pressures and it is the only ignition source with an easily measurable ignition energy release. Furthermore, it does not introduce another chemical reaction into the system. Finally, a proposal for a standard ignition source for explosion tests on hybrid mixtures is derived from the test results. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions CY - Braunschweig, Germany DA - 27.07.2020 KW - Ignition source KW - Exploding Wire KW - Safety characteristics determination KW - Hybrid mixtures PY - 2020 AN - OPUS4-51691 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spitzer, Stefan T1 - Entwicklungen zu Bestimmungsverfahren für sicherheitstechnische Kenngrößen des Explosionsschutzes für hybride Gemische N2 - Zur Bestimmung sicherheitstechnischer Kenngrößen (STK) von hybriden Gemischen (Gemisch aus mindestens zwei brennbaren Phasen, wie z.B. Staub/Gas- oder Gas/Dampf-Gemisch) existieren bislang keine einheitlichen, genormten Prüfmethoden. Die Normen und Regelwerke zur Bestimmung der STK von einphasigen brennbaren Systemen (Staub, Gas, Dampf) unterscheiden sich teilweise erheblich. Beispielsweise sind in den jeweiligen Normen für Stäube, Gase und Dämpfe unterschiedliche Zündquellen und Zündenergien definiert. Des Weiteren unterscheiden sich die in den Normen definierten Prüfabläufe bei der Gemischherstellung. Bei der Entwicklung einer einheitlichen Norm für hybride Gemische muss der Einfluss dieser beiden Parameter ermittelt werden, um die Vergleichbarkeit mit den STK der einzelnen Komponenten Gas, Staub und Dampf gewährleisten zu können und bisherige Erkenntnisse zu hybriden Gemischen interpretieren und bewerten zu können. T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Online meeting DA - 04.11.2020 KW - Hybride Gemische KW - Explodierender Draht KW - Sicherheitstechnische Kenngrößen KW - Zündquellen PY - 2020 AN - OPUS4-51692 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klippel, Andrea A1 - Hofmann‐Böllinghaus, Anja A1 - Piechnik, Kira A1 - Heydick, Lukas A1 - Wu, Hongyi A1 - Köhler, Florian A1 - Klaffke, Benjamin T1 - Experimental Analysis of Fire Behavior in Pine Forests and Agricultural Fields: Large‐Scale Tests Conducted Within the European TREEADS Project N2 - Two large‐scale experiments investigated fire spread mechanisms in vegetation ground fires in a pine forest and an agricultural field within the European TREEADS project. The tests, conducted in Saxony‐Anhalt and Brandenburg, targeted regions with dry, sandy soils and extensive pine stands and aim to improve suppression strategies and wildfire research. The forest experiment was conducted on a 16 × 22 m plot with line ignition using a gasoline‐diesel mix. Fire spread was documented with drone‐based video and infrared imaging. Ninety‐six thermocouples and two gas sensors were mounted on trees, and a mobile FTIR spectrometer enabled real‐time smoke analysis. A tilled and foam‐treated strip prevented uncontrolled spread. Under stable weather conditions (23°C, light wind, low soil moisture), a consistent temperature rise and distinct combustion phases were observed. Smoldering dominated in areas with mosses, grasses, and deadwood, with intermittent flaming, limited flame heights (< 0.5 m), and substantial smoke production. Peak temperatures exceeded 500°C, and CO concentrations reached 238 ppm, though wind turbulence complicated gas sampling. The second experiment on a cut agricultural field near Nauen involved burning approximately 700 m2 using a 20 m ignition line aligned with wind direction. Drone‐based infrared monitoring captured rapid spread on the stubble surface. The results underscore the variability and measurement challenges of outdoor fires and highlight the necessity of continued large‐scale experiments to support physical and numerical wildfire modeling. These findings provide essential empirical data for evaluating vegetation‐specific burning behavior, improving sensor deployment strategies, and refining validation approaches for next‐generation wildfire spread models under central European fuel and weather conditions, and supporting decision‐making in wildfire management. KW - Wildfire KW - Pine KW - Crop PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654199 DO - https://doi.org/10.1002/fam.70045 SN - 0308-0501 SP - 1 EP - 11 PB - Wiley AN - OPUS4-65419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hahn, Sarah‐K. A1 - Gnutzmann, Tanja A1 - Meinert, Marion A1 - Hofmann-Böllinghaus, Anja A1 - Oberhagemann, Dirk A1 - Krause, Ulrich T1 - Incipient Fires—Definition, Detection and Extinguishment by Laypersons N2 - The earlier a fire is noticed, the less developed it is and the easier it can be prevented respectively stopped, even by laypersons. Within the research project ‘TEBRAS’ the incipient phase of fires was investigated in detail. In the course of the project, it became apparent that the definition of what exactly the incipient phase of a fire encompasses is not definite and depends on the disciplines dealing with the subject ‘fire’. Based on the results of a literature review, an inquiry under experts and laypersons as well as practical fire tests a definition for the phenomenon of the incipient fire was developed which divides it into four phases. Driving key factors for each phase are identified considering the main parameters to detect and extinguish the fire. KW - Developing fires KW - Development of fires PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649310 DO - https://doi.org/10.1002/fam.70025 SN - 0308-0501 VL - 50 IS - 1 SP - 3 EP - 10 PB - Wiley AN - OPUS4-64931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hothan, Sascha T1 - Lösungsansätze für neue Herausforderungen im konstruktiven baulichen Brandschutz N2 - Der Klimawandel und die zunehmende Ressourcenknappheit stellen Herausforderungen dar, die in Zukunft grundlegende Anpassungen in der Art des Umgangs mit Rohstoffen, Energie und des Wirtschaftens an die Gesellschaft stellen werden. In der Leichtbaustrategie der Bundesregierung wird zusammenfassend festgestellt, dass der fortschreitende Klimawandel Technologien erfordert, die die Transformation der Wirtschaft, eine ressourcenschonende Wertschöpfung und eine nachhaltige und resiliente Rohstoffversorgung sicherstellen. Aus diesen für alle Wirtschaftszweige sehr allgemein formulierten Anforderungen und vor dem Hintergrund eines wachsenden Bedarfs schnell verfügbarer Bausubstanz, lassen sich konkrete Anforderungen für das Bauwesen ableiten. Es geht um die Reduktion des Ressourcenverbrauchs für die Errichtung und den Betrieb neuer Gebäude sowie die Nach- und Weiternutzung bestehender Bausubstanz. In der Bundesanstalt für Materialforschung und -prüfung (BAM) wurde im Themenfeld Infrastruktur das Aktivitätsfeld Leichtbau ins Leben gerufen, das die Forschungsaktivitäten zum Leichtbau bündelt. Im vorliegenden Beitrag werden ausgewählte Projekte.in Bezug auf den konstruktiven baulichen Brandschutz vorgestellt und die besonderen Herausforderungen verdeutlicht sowie die daraus abgeleiteten technischen Lösungsmöglichkeiten aufgezeigt. T2 - Bauphysikertreffen 2025 -- Hochschule für Technik Stuttgart CY - Stuttgart, Germany DA - 28.11.2025 KW - Brandschutz KW - Leichtbau PY - 2025 AN - OPUS4-65370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wagner, Jan A1 - Häfner, P. A1 - Reimann, H.-A. A1 - Schartel, Bernhard T1 - Valorization of Natural Fibers in Flame Retarded Poly(lactic acid) N2 - Extensive research has explored natural fiber reinforced composites, typically focusing on a single fiber within a polymer matrix. Comprehensive comparisons across different natural fibers in the same polymer, which are critical for industrial material selection, remain limited. This work presents a systematic comparison of untreated hemp, flax, and sisal fibers incorporated at varying fiber lengths and loadings into flame retarded poly(lactic acid) (PLA). Fire behavior, thermal, and mechanical responses were investigated through thermogravimetry, UL 94, and cone calorimetry, alongside crystallinity, molecular weight (MW), and microstructural analysis. Fiber incorporation reduced the peak heat release rate (pHRR) by up to 30 % in 30 wt% hemp, attributed to protective layer formation, but increased flammability in UL 94. A phytic acid melamine salt combined with expandable graphite and 20 wt% hemp produced incomplete combustion at 50 kW/m², raising char residue from 4 to 24 wt% and halving pHRR. Petrella plots revealed that fiber addition alone lowered fire load and flashover propensity as effectively as phytic acid melamine; with hemp, phytic acid and expendable graphite, the flashover hazard and fire load were halved. MW was preserved while crystallinity and modulus increased with fiber content. Hemp delivered the most consistent reinforcement, while optimized processing enabled flax and sisal to improve stiffness. Performance gains were strongest when individual fibers were dispersed via optimized processing, preventing bundle fracture under load. Plasma modification of the fibers improved the maximum tensile strength in the composites. A practical guide is provided for valorizing natural fibers in PLA composites, demonstrating routes to bio-based, compostable materials with improved fire safety and mechanical performance suitable for industrial processing. KW - Poly(lactic acid) KW - Hemp KW - Sisal KW - Flax KW - Flame retardant KW - Phytic acid PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653038 DO - https://doi.org/10.1016/j.mtcomm.2025.114575 SN - 2352-4928 VL - 50 SP - 1 EP - 41 PB - Elsevier Ltd. AN - OPUS4-65303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spitzer, Stefan A1 - Askar, Enis A1 - Krietsch, Arne A1 - Schröder, Volkmar T1 - Comparative study on standardized ignition sources used for explosion testing N2 - For the determination of safety characteristics of gases, vapors and dusts different types of ignition sources are used in international standards and guidelines. Table 1 compares technical relevant ignition sources with their main features. The paper presents test results of a comparative calorimetric and visual study between four different types of ignition sources. The ignition procedures were analyzed visually with a high-speed camera and electric recordings. In addition to that, the influence of the electrode-orientation, -distance as well as ignition energy on the reproducibility of the exploding wire igniter was tested. The exploding wire is already in use for standardized determination of safety characteristics of gases, first tests on the suitability of the exploding wire igniter for dust testing have been carried out by Scheid et al. Using the exploding wire, the ignition energy can be varied from 2 to 10 000 J (2 x 5 000 J) and thus it could be used for gases, vapors, dusts and hybrid mixtures. Moreover it can be used at high initial pressures and it is the only ignition source with an easily measurable ignition energy release. Furthermore, it does not introduce another chemical reaction into the system. Finally, a proposal for a standard ignition source for explosion tests on hybrid mixtures is derived from the test results. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions CY - Online meeting DA - 27.07.2020 KW - Ignition source KW - Exploding Wire KW - Hybrid mixtures KW - Safety characteristics determination PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517908 UR - https://oar.ptb.de/files/download/5f3e662f4c93901010006dbf DO - https://doi.org/10.7795/810.20200724 VL - 13 SP - 864 EP - 875 PB - PTB Physikalisch-Technische Bundesanstalt Braunschweig AN - OPUS4-51790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spitzer, Stefan A1 - Askar, Enis A1 - Krietsch, Arne A1 - Schröder, Volkmar T1 - Entwicklungen zu Bestimmungsverfahren für sicherheitstechnische Kenngrössen hybrider Gemische N2 - Zur Bestimmung sicherheitstechnischer Kenngrößen (STK) von hybriden Gemischen (Gemisch aus mindestens zwei brennbaren Phasen, wie z.B. Staub/Gas- oder Gas/Dampf-Gemisch) existieren bislang keine einheitlichen, genormten Prüfmethoden. Die Normen und Regelwerke zur Bestimmung der STK von einphasigen brennbaren Systemen (Staub, Gas, Dampf) unterscheiden sich teilweise erheblich. Beispielsweise sind in den jeweiligen Normen für Stäube, Gase und Dämpfe unterschiedliche Zündquellen und Zündenergien definiert. Des Weiteren unterscheiden sich die in den Normen definierten Prüfabläufe bei der Gemischherstellung. Bei der Entwicklung einer einheitlichen Norm für hybride Gemische muss der Einfluss dieser beiden Parameter ermittelt werden, um die Vergleichbarkeit mit den STK der einzelnen Komponenten Gas, Staub und Dampf gewährleisten zu können und bisherige Erkenntnisse zu hybriden Gemischen interpretieren und bewerten zu können. T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Online meeting DA - 04.11.2020 KW - Explodierender Draht KW - Sicherheitstechnische Kenngrößen KW - Hybride Gemische PY - 2020 SN - 978-3-18-092376-5 SN - 0083-5560 VL - 2376 SP - 3 EP - 15 PB - VDI Verlag GmbH CY - Düsseldorf AN - OPUS4-51789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spitzer, Stefan A1 - Pandal, Adrián A1 - Rodríguez, Manuel Velasco A1 - Schmidt, Martin A1 - Danzi, Enrico A1 - Dufaud, Olivier A1 - Janovsky, Bretislav T1 - Investigations on different distribution systems for dusts inside the 20L-sphere N2 - The determination of several safety characteristics for dusts requires the dispersion of it in air. This is normally conducted using two vessels, one with an overpressure holding the dust and dispersing it into the second one, where the explosion takes place, through a nozzle. This procedure has the disadvantage that some dusts cannot be conveyed through the nozzle properly. Another disadvantage is that the pressure balancing between the two vessels depends on the dust loading and especially for heavy dusts and high loadings the initial pressure inside the explosion vessel might be reduced. Flocky dusts or dusts that might be dangerous to convey through a thin nozzle with an overpressure (nano powders, zirconium) are also difficult to test according to the existing standards and may not be tested with the standard nozzles, that are so far used for the determination of safety characteristics. One very recent example, testing nitrocellulose, raised the question, whether some dusts even pose a risk being distributed and pressed through a nozzle for the testing device and, in worst case, for the operator. Previous researchers have developed alternative types of nozzles for specific types of dust, but provide limited evaluation of their performance relative to standard nozzles. Additionally, researchers have not provided sufficient geometry so that they can be reproduced by others. One alternative nozzle for the dispersion of flocky or coarse dusts is stated in the ISO standard but not described there either. This article investigates four types of nozzles: The two standard ones that are widely used already, an alternative type, that got introduced into the international standard in 2016 but is still seldomly used and one that was constructed to overcome some of the observed disadvantages. The injection curves are compared with and without dust loadings as well as the explosion characteristics. Eventually, a suggestion is given for different types of dusts. KW - Dust explosions KW - Safety characteristics PY - 2024 DO - https://doi.org/10.1016/j.jlp.2024.105492 SN - 0950-4230 VL - 92 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-61697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schiaroli, Alice A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Ustolin, Federico A1 - Cozzani, Valerio T1 - Modelling the behaviour of cryogenic liquid hydrogen tanks engulfed in fire N2 - The safe use of liquid hydrogen as a clean fuel requires a deep understanding of its behaviour in accident scenarios. Among other scenarios, the possible involvement of cryogenic liquid hydrogen tanks in engulfing fires is of particular concern, due to the potentially severe consequences. This study proposes a computational fluid dynamic model suitable to simulate the behaviour of liquid hydrogen tanks equipped with multi-layer insulation (MLI) engulfed in fire. An original approach has been developed to assess the progressive degradation of the performance of the thermal insulation, that is crucial in determining the tank pressurization and failure. The model is validated against full-scale experimental fire tests. The outcomes of the model reproduce the progressive pressurization and the opening time of the pressure relief valve within 2 % error. The results demonstrate the importance of accounting for the dynamic evolution of the progressive degradation of the insulation when evaluating tank pressurization, and they highlight the limitations of empirical, simplified state-of-the-art approaches. Furthermore, the analysis evidences the key role of the fire temperature in governing tank response, stressing the need for proper fire characterization to support reliable modelling of fire scenarios and the development of emergency planning and mitigation strategies ensuring the structural integrity of liquid hydrogen tanks during fire attacks. KW - LH2 KW - LNG KW - Fire KW - Tank PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652920 DO - https://doi.org/10.1016/j.psep.2025.108319 SN - 0957-5820 VL - 206 SP - 1 EP - 14 PB - Elsevier Ltd. AN - OPUS4-65292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Systems With Cryogenic Liquefied Gases In Fire-Incidents N2 - The volumetric energy density of a gas can be increased by liquefaction, which occurs when the gas is cooled below the saturation point. Liquefied gases of great importance to the energy transition are Liquefied Hydrogen (LH2) and Liquefied Natural Gas (LNG), which can be liquefied at temperatures below 160°C. Systems for storing these gases typically must be overpressure resistant and require thermal super insulations (TSI) to hold cryogenic conditions and minimize boil-off losses from evaporation. TSI with vacuum and MLI or perlites are suitable for many applications involving LNG and LH2. Such systems are typically double-walled structures where the inner wall is in contact with the cryogenic liquefied gas. MLI or perlites are located in the gap between the inner and the outer wall, that is kept under vacuum conditions. This combination of insulations strongly reduces the heat transfer between the environment and the cryogenic liquefied gas. From an economic point of view the systems are well sophisticated. However, knowledge of the behavior of this kind of systems in a typical event such as a fire is limited, but necessary to evaluate the safety of the increasing number of applications. The objective of the research is to determine how TSI behaves at different fire temperatures during fire exposure and afterwards. Special attention is paid to changes in the heat flux, the material properties and vacuum state over time. For this purpose, thermogravimetric analysis (TGA) studies have been carried out. In addition, a test rig was developed that allows testing of TSI at temperatures up to 1000°C under realistic integration conditions and subsequent analysis of the TSI samples. In the test rig the double-wall with vacuum and MLI or perlites inside is simulated. The fire conditions are simulated on one side of the double-wall by adjustable electrical heating elements. This process allows the implementation of repeatable heat flows of up to 100 kW/m². On the other side of the double-wall, cold or cryogenic conditions are simulated with a heat exchanger through which water or the vapor of liquid nitrogen (approx. -196°C) flows. The heat exchanger is also used to determine the heat flux through the double-wall. Thus, the test rig allows thermal loading and performance analysis of TSI samples at the same time. Compared to tests with real cryogenic systems, tests with this experimental setup have the advantage that, first, the instrumentation is easier to realize, and a higher repeatability is ensured. Second, the local heat flow can be determined over time, and the sample of a TSI can be taken non-destructively and thus analyzed. Third, the tests are less risky as well as time+ and material intensive, so that more tests and variants can be investigated with the same budget. Preliminary results obtained considering several types of MLI under vacuum show that all observed typs of MLI can be damaged under strong thermal loading. The damages observed were outgassing, melting, shrinkage, cracking, lump formation, and concomitant local loss of the MLI's function as a radiation shield. However, the study also shows that a damage does not always have an extreme effect on the insulating performance. T2 - IMECE2022 CY - Columbus, Ohio, USA DA - 30.10.2022 KW - LH2 KW - LNG KW - Safety KW - Insulation KW - Tank PY - 2022 AN - OPUS4-56445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dudziak, Mateusz A1 - Dural, Esra A1 - Dey, R. A1 - Ullrich, M. S. A1 - Huth, Christian A1 - Thomson, C. A1 - Schartel, Bernhard T1 - Together We Can: Synergistic Flame Retardancy by Melamine Polyphosphate and Phosphorylated Microalgae in Polylactide Biocomposites N2 - A strategy for enhancing the sustainable flame retardancy of polylactide (PLA) composites by partially replacing melamine polyphosphate (MPP), a commercial flame retardant proposed for PLA, with wastewater polyphosphate-enriched microalgae (P-Algae) has been explored. The incorporation of P-Algae at a 1:1 ratio with MPP leads to a notable synergistic effect, surpassing the expected additive behavior of the individual components. Comprehensive characterization encompassing thermogravimetric analysis coupled with FTIR, pyrolysis combustion flow calorimeter (PCFC), cone calorimeter, oxygen index (LOI), UL-94 tests, and rheological measurements—demonstrates that the presence of this biomaterial can significantly enhance flame retardant performance. Replacing 50% of MPP with P-Algae in PLA resulted in a 17% reduction in peak heat release rate (pHRR) and maintained a V-0 rating in UL-94 testing. The use of P-Algae does not compromise the flame retardancy of PLA but rather contributes positively, offering a promising path toward more sustainable flame-retardant systems. By leveraging naturally derived biomass, this approach aligns with the growing demand for novel eco-friendly technologies in polymer engineering. Insights into an innovative renewable additive as a functional and effective component in flame-retardant biocomposites have been achieved. KW - Flame retardancy KW - Melamine polyphosphate KW - Phosphorus- enriched microalgae KW - Polylactide PLA KW - Synergism PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640539 DO - https://doi.org/10.1002/pat.70350 SN - 1099-1581 SN - 1042-7147 VL - 36 IS - 9 SP - e70350 PB - John Wiley & Sons Ltd. AN - OPUS4-64053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klippel, A. A1 - Hofmann-Böllinghaus, Anja A1 - Piechnik, K. A1 - Gnutzmann, Tanja T1 - Development of toxicity assessment method for bus interior materials N2 - In recent years, fire safety requirements for bus interior materials have been increased and introduced into international regulations. Fire safety requirements for the burning rate, melting and dripping behaviour of interior materials already exist for many years. However, it remains unclear to what extent the release of smoke, combustion products and their toxicity should be limited. Therefore, a research and development project 82.0723 funded by BASt (Federal Highway Research Institute) was initiated to develop a simplified procedure for testing the toxicity and smoke development in case of fire of interior materials used in buses. The scope of the research included calculations to assess the toxicity of fire gases and the derivation of specifications for the formation of practicable limit values for smoke toxicity. Further investigations are needed to derive these limit values for smoke toxicity in order to be applicable for real fire scenarios in buses. T2 - Conference Fire in Vehicles FIVE CY - Stavanger, Norway DA - 24.04.2023 KW - Bus materials PY - 2023 SP - 80 EP - 90 AN - OPUS4-57627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manes, M. A1 - El Houssami, M. A1 - Campbell, R. A1 - Sauca, A. A1 - Rush, D. A1 - Hofmann-Böllinghaus, Anja A1 - Andersson, P. A1 - Wagner, P. A1 - Veeneklaas, J. A1 - van Hees, P. A1 - Guillaume, E. T1 - Closing Data Gaps and Paving the Way for Pan-European Fire Safety Efforts: Part I—Overview of Current Practices for Fire Statistics N2 - The analysis of the current state of fire statistics and data collection in Europe and other countries is needed to increase awareness of how fire incidents affect buildings and to support pan-European fire prevention and fire mitigation measures. The terminology and data collected regarding fire incidents in buildings in the EU Member States were mapped to obtain meaningful datasets to determine common terminology, collection methodology, and data interpretation system. An extensive literature review showed that fire data collection systems have been instrumental in informing firefighting strategies, evidence-based planning, prevention, and educational programmes. Differences and similarities between fire data collection systems were also investigated. The amount and quality of the information in fire statistical recording systems appear to be influenced by the complexity and structure with which the data are collected. The analysis also examined the existing fire statistics in the EU Member States and a few other countries. Finally, a detailed investigation of the number of fires, fire deaths, and injuries from 2009 to 2018 in several countries was examined based on data from a report by CTIF. The trends showed differences attributable to the existing fire statistical practices in terms of terminology and data collection, and interpretation. Part II proposes a common terminology for selected fire statistical variables. The results provide relevant information regarding fire safety at the European level and should be used to guide the development of more uniform fire statistics across Europe. KW - Fire statistics KW - European project PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575711 DO - https://doi.org/10.1007/s10694-023-01415-6 SN - 1572-8099 SP - 1 EP - 44 PB - Springer CY - Heidelberg AN - OPUS4-57571 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - El Houssami, M. A1 - Försth, M. A1 - Fredriksson, H. A1 - Drean, V. A1 - Guillaume, E. A1 - Hofmann-Böllinghaus, Anja A1 - Sandinge, A. T1 - Fire safety of interior materials of buses N2 - This study provides an analysis on the fire safety of passengers and the fire protection of coaches and buses. A brief review of major bus fire incidents, an overview of current regulations in Europe, and their limitations are presented. The study finds that the current small-scale fire test methods described in UN ECE Reg No. 118 need to be replaced by test methods that can assess the reaction to fire of materials when exposed to ignition sources of varying sizes. To address these shortcomings, the study proposed an expert recommendation to update the material fire safety requirements and testing for buses. Additional measures are proposed, derived from objectives and strategies applied in other transport sectors, and can be tested through existing European and international standards, which are widely used by several industries. These measures aim to extend the time with tenable conditions for a safe evacuation in case of fire, reduce the degree of damage to buses, reduce the risk for fast and excessive thermal exposure on modern energy carriers needed for a more sustainable transport sector. KW - Fire KW - Bus interior materials KW - Rregulations PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575700 DO - https://doi.org/10.1002/fam.3134 SN - 1099-1018 SP - 1 EP - 15 PB - Wiley CY - London AN - OPUS4-57570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Piechnik, Kira A1 - Heydick, Lukas A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea T1 - Comprehensive laboratory study on smoke gases during the thermal oxidative decomposition of forest and vegetation fuels N2 - AbstractThis study investigates the composition of smoke gases in forest and vegetation samples to draw conclusions about the actual smoke gas composition during wildfires. The focus is particularly on regions with extensive pine forests, like in Eastern Germany. The relevance of smoke gases is well illustrated by the example of wildfires in Québec, influencing air quality in New York, in 2023. By employing a modified DIN tube furnace, a bench‐scale test set‐up, the research emphasizes the examination of smoke composition from tree species and ground cover, prioritizing gases while disregarding particles. Key smoke gases are identified as CO, CO2, SO2, HCN, C3H4O (acrolein) and CH2O (formaldehyde) and their concentrations are compared with Acute Exposure Guideline Levels (AEGL) limits. Acknowledging the limitations of AEGL usage and the problem with direct quantitative comparison of toxicant concentrations (cf. ISO 29903‐1:2020), the study highlights variations in smoke composition across different samples. The results of the studies reveal a significant disparity in CO concentration between dry and fresh pine needles. Frequently, the AEGLs of key gases are exceeded significantly. The elemental analysis of the barks indicates distinct differences in composition, reflecting in the concentrations of smoke gases. The ratio of 1 mole of substance turnover to the identified key components will be used to determine input parameters for the subsequent numerical simulation. KW - Forest KW - Wildfire KW - Ignition PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-617744 DO - https://doi.org/10.1002/fam.3253 SP - 1 EP - 12 PB - Wiley online library AN - OPUS4-61774 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Hongyi A1 - Buhk, Frederik A1 - Christiani, Ricardo A1 - Hofmann-Böllinghaus, Anja T1 - Influence of local vegetation on ignition and fire spread of vegetation fires-Experimental and numerical approach N2 - Within the framework of the European TREEADS project, Brandenburg and Saxony-Anhalt were designated as model regions. This designation facilitated the investigation of vegetation types, soil structure, and soil dryness. Brandenburg and Saxony-Anhalt are identified as the driest regions in Germany according to the annual mean soil moisture data. In these regions, 48% to 73% of the forests are composed of pine species. The soil profile is characterized by a relatively thin organic layer, measuring between 0.2 and 0.3 meters, underlain by sandy substrates. Consequently, surface and ground fires are more prevalent in these areas compared to other types of fires, such as crown fires. To investigate the influence of local vegetation, it goes through two aspects. One is laboratory study, the local vegetation samples were collected and tested for the thermal properties, such as activation energy, heat content and reaction kinetic of pyrolysis and dehydration. At the same time, small and medium scale combustion experiments were conducted to investigate the burning behavior. The other aspect is using the thermal properties as the input parameters for the development of numerical simulation in the computational fluid dynamics (CFD) tool. These models were then be validated with the combustion experiments, as a baseline for the further scaling up of the models, in order to investigate how the parameters influencing the fire spread in a large-scale case numerically. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Wildfire PY - 2025 SP - 2221 EP - 2225 PB - Interscience CY - London AN - OPUS4-63932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Simon T1 - FireSpread_MedEU N2 - Wildfires are becoming more frequent and severe under the influence of climate change, posing increasing risks to ecosystems, human health, and infrastructure. Accurate spatiotemporal data on wildfire propagation is essential for advancing fire behavior modeling, improving management strategies, and mitigating future impacts. However, existing datasets with both high spatial and temporal resolution are rare, costly, and time-consuming to produce. To address this gap, we present FireSpread_MedEU, a dataset comprising 313 consecutive burned area maps from 102 wildfire events across the Mediterranean and Europe between 2017 and 2023. Burned areas were derived from high-resolution Planet optical satellite imagery (~3 m spatial, mostly daily temporal resolution) using a semi-automated workflow, followed by manual refinement to ensure highest accuracy. Each dataset entry is enriched with detailed metadata and a subjective quality assessment. With its high level of spatiotemporal precision, FireSpread_MedEU provides essential data for the development and validation of machine learning models or wildfire simulation models. It opens new research opportunities in wildfire behavior analysis, risk assessment, and predictive modeling. KW - Wildfire KW - Spread KW - Machine Learning PY - 2025 DO - https://doi.org/10.5281/zenodo.16813435 PB - Zenodo CY - Geneva AN - OPUS4-64768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Festag, Sebastian A1 - Esser, Jonas A1 - Maiworm, Björn A1 - Hofmann-Böllinghaus, Anja T1 - Herausforderungen des modernen Holzbaus: Erste statistische Erkenntnisse aus realen Gebäudebränden in Holzbauweise N2 - Hinsichtlich des Brandschutzes zeigt der durch die Bundesregierung geförderte Holzbau Herausforderungen gegenüber Massivbauweisen. Diese spiegeln sich in Erfahrungen von Feuerwehren wider, aber nun auch in statistischen Untersuchungen der Brandschadenstatistik der Vereinigung zur Förderung des deutschen Brandschutzes sowie der Arbeitsgemeinschaft der Leiterinnen und Leiter der Berufsfeuerwehren (AGBF) und des Deutschen Feuerwehrverbands (DFV). Im Zeitraum von 2013 bis 2017 wurden in der vfdb-Brandschadenstatistik Daten zu 5016 Alarmierungen bei Gebäudebränden in Deutschland systematisch mit einem einheitlichen Erfassungsbogen erfasst und seit 2016 „bemerkenswerte Brandeinsätze“ durch einen Evaluierungsbogen zu Maßnahmen des vorbeugenden Brand- und Gefahrenschutzes von AGBF/DFV. Grundlage des vorliegenden Beitrags sind die Auswertung und der Vergleich beider statistischer Datensätze hinsichtlich der Brände in Gebäuden in Holzbauweise. Es zeigt sich, dass der Holzbau mit brandschutztechnischen Herausforderungen verbunden ist. KW - Brandschutz KW - Brandstatistik PY - 2025 DO - https://doi.org/10.1002/bate.202400078 SN - 1437-0999 VL - 2025 IS - 102 SP - 1 EP - 8 PB - Wiley AN - OPUS4-63000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klippel, A. A1 - Hofmann-Böllinghaus, Anja A1 - Gnutzmann, Tanja A1 - Piechnik, K. T1 - Reaction-to-fire testing of bus interior materials: Assessing burning behaviour and smoke gas toxicity N2 - Although fire safety regulations for buses have been adapted in recent years regarding, for example, fire detection and engine fire suppression systems, the changes in regulations for bus interior materials are minimal. A comparison of fire safety regulations for interior materials in other transport sectors for trains, ships or aircraft reveals a much lower level of requirements for bus materials. Although repeated bus accidents as well as fire statistics show the danger a bus fire can pose to passengers. In particular, the combination of a fire incident and passengers with reduced mobility led to severe disasters in Germany and other European countries. To enhance the fire safety for passengers, the interior bus materials are crucial as the fire development in the bus cabin determines whether escape and rescue is possible. Against this background, bus interior materials were tested in different fire test scenarios. Measurement of a wide variety of parameters, for example, the mass loss, ignition time, smoke gas composition, heat release rate among others were carried out. Tested materials complied to the newest set of requirements. For this purpose, interior materials and their components had to be identified according to their chemical structure. Parts of the tests were funded by BASt (Federal Highway Research Institute) in the project 82.0723/2018. Experimental results show reaction-to-fire behaviour which lead to very limited times for escape and rescue in case of fire in a bus cabin. Based on the studies on fire behaviour and toxicity assessment, recommendations for improved fire safety regulations for interior materials could be made. KW - Burning behaviour KW - Bus interior materials KW - Cone calorimeter KW - DIN tube furnace KW - FTIR spectroscopy KW - Reference values KW - Smoke toxicity PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576085 DO - https://doi.org/10.1002/fam.3108 SN - 1099-1018 VL - 47 IS - 5 SP - 665 EP - 680 PB - Wiley CY - New York, NY AN - OPUS4-57608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Anderson, Johan A1 - Chiva, Roman A1 - Dumont, Fabien A1 - Lalu, Octavian A1 - Hofmann-Böllinghaus, Anja T1 - Assessment of fire performance of facades in a round robin using the European approach N2 - In recent years, an experimental round robin of full-scale façade tests was conducted using the proposed new European approach for assessing the fire performance of façades. The initial results were used to develop a calibration scheme and to propose assessment criteria aligned with appropriate safety levels. During the project, a need emerged to evaluate the stability of the fire source and the Consistency of heat exposure. This paper addresses these concerns by comparing the mass loss rates across a series of tests and analysing averaged temperature readings at various locations on the façade. The findings indicate that the method demonstrates high stability in terms of mass loss rates and provides consistent and appropriate heat exposure. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, UK DA - 30.06.2025 KW - Facade systems KW - Testing PY - 2025 VL - 2025 SP - 562 EP - 572 PB - Interscience CY - London AN - OPUS4-63998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Anderson, J. A1 - Boström, L. A1 - Chiva, R. A1 - Guillaume, E. A1 - Colwell, S. A1 - Hofmann-Böllinghaus, Anja A1 - Toth, P. T1 - European approach to assess the fire performance of façades N2 - Several attempts have been made in the past to develop a European harmonized testing and assessment method for façades before the European commission decided to publish a call for tender on the topic. A project consortium from five countries (Sweden, UK, France, Germany and Hungary) applied to the call for tender and was contracted to develop a European approach to assess the fire performance of façades. 24 sub-contractors and 14 stakeholder entities were part of the project. The objective of the European project was to address a request from the Standing Committee of Construction (SCC) to provide EC Member States regulators with a means to regulate the fire performance of façade systems based on a European Approach agreed by SCC. The initial stages of this Project were focused on establishing a Register of the regulatory requirements in all Member States in relation to the fire Performance of façade systems, and to identify those Member States who have regulatory requirements for the fire performance façade systems which go beyond the current EN 13501 (reaction to fire and fire resistance) classification systems and to collate the details of these additional requirements. After having confirmed the regulatory needs a testing and classification methodology based on BS 8414 and DIN 4102-20 was developed to address the identified key performance and classification characteristics. This paper is a short overview of results the two-year development work, which Final Report published by the European Commission in 2018. KW - Facade KW - Regulation KW - Testing PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530501 DO - https://doi.org/10.1002/fam.2878 SN - 1099-1018 VL - 45(5) IS - Special issue: Facade fire safety SP - 598 EP - 608 PB - Wiley CY - Oxford AN - OPUS4-53050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea T1 - Vehicle Fires: Significant Fire Hazard in Transportation Infrastructure N2 - Vehicle fires in transportation infrastructure such as depots, car parks, tunnels and stations are a recurring phenomenon, with recent years witnessing an alarming number of severe incidents, particularly in vehicle depots. These fires often result in the total loss of both vehicles and buildings, with striking similarities in their progression. Analysis of recent fire events, including a study conducted for the German insurer Provinzial, shows that fires in bus depots, military facilities and car parks tend to spread rapidly and destructively. While building regulations vary across sectors and countries, the fire safety standards for interior materials in road vehicles remain globally harmonized and are based on outdated regulations such as FMVSS 302, which offer only a minimal level of protection. In contrast, materials used in trains, ships, and aircrafts must comply with significantly stricter fire safety standards, which may explain the relatively lower incidence of fires in these sectors. Common fire protection systems in depots, such as sprinklers and vents, often fail to account for the specific characteristics of automotive vehicles, including their watertight design and the rapid development of hot gas layers that accelerate fire spread. Insurance companies have begun to acknowledge these challenges. Given the high flammability, heat release and smoke toxicity of materials commonly used in vehicles, combined with the growing share of combustible plastics over the past decades, this paper argues for a paradigm shift. Instead of relying solely on inhancing building protection, introducing significantly stricter fire safety requirements for vehicle materials could offer a more effective and sustainable approach to safeguarding transportation infrastructure. Ongoing experimental investigations are being conducted to evaluate the reaction to fire behavior of various bus interior materials. These studies focus on the emission of toxic gases during combustion, with particular attention to substances exceeding critical AEGL thresholds. Materials such as polyurethane foams and hard plastics have shown significant variation in their smoke gas profiles, highlighting potential health and safety risks in fire scenarios. The research aims to support the development of safer material choices and regulatory measures. Upon completion of tests with additional materials, all findings will be published to ensure transparent and comprehensive reporting. T2 - Interflam 2025, 16th International Fire Science and Engineering Conference CY - London, United Kingdom DA - 30.06.2025 KW - Vehicle fires KW - Transportation PY - 2025 AN - OPUS4-63922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geoerg, Paul A1 - Schumann, Jette A1 - Holl, Stefan A1 - Holl, Maik A1 - Hofmann-Böllinghaus, Anja T1 - The influence of individual impairments in crowd dynamics N2 - The importance of empirical relations to quantify the movement of pedestrians through a facility has increased during the last decades since performance-based design methods became more common. Bottlenecks are of special interest because of their importance for egress routes and as they result in a reduced capacity. The empirical relations as the density-dependent movement speed or flow rate were derived by studies under laboratory conditions, which were usually conducted with populations of homogeneous characteristics forbetter control of influencing variables. If individual characteristics of a crowd become more heterogeneous, individuals were forced to adapt their individual movement and control individual manoeuvring. These unintended interactions lead to a different shape of the fundamental empirical relations. Here, we present results from a movement study under well-controlled boundary conditions in which participants with and without different characteristics of disabilities participated. To consider the effect of different heterogeneities on the capacity of a facility, fundamental diagrams are generated using the Voronoi method. If participants with visible disabilities (such as using assistive devices) are part of a crowd, significant differences relating to the shape of the empirical Relations and the capacities are found. This indicates that the heterogeneity of a Population leads to an increased interpersonal interaction which results in influenced movement characteristics. KW - Engineering egress data KW - Heterogeneity KW - Human behaviour KW - Movement characteristics KW - Pedestrian dynamics PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508943 DO - https://doi.org/10.1002/fam.2789 SN - 0308-0501 VL - 45 IS - 4 SP - 529 EP - 542 PB - Wiley Online Libary CY - New Jersey, USA AN - OPUS4-50894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Piechnik, Kira A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea T1 - Self‐ignition of forest soil samples demonstrated through hot storage tests N2 - AbstractThe increasing threat of forest fires on a global scale is not only a matter of concern due to the potential harm they may cause to both human and animal life but also due to their significant role in exacerbating climate change. In light of these circumstances, one might inquire as to whether forest soil can self‐ignite and, if so, under what conditions and at what temperatures this phenomenon may occur. This question is being addressed in the German pilot “Fire science of wildfires and safety measures” of the EU project TREEADS, and the first results are presented below. The importance of basic research into the self‐ignition of forest soil cannot be underestimated, as it provides crucial knowledge to prevent forest fires and protect human and animal health. Furthermore, mitigating the occurrence of forest fires can also play a role in reducing greenhouse gas emissions, contributing to global efforts to combat climate change. The procedure of the hot storage test is an effective means of determining whether a material can self‐ignite. During the investigation of six soil samples, it was found that five of them were indeed capable of self‐ignition. In addition to determining whether the material ignites, the modified hot storage test also analyzed the resulting smoke gases and measured their concentration. The research question of whether regional forest soil is capable of self‐ignition can be answered with yes based on these initial tests. Further experiments are needed to determine if self‐ignition causes forest fires. KW - FTIR KW - Hot storage KW - Ignition KW - Soil KW - Wildfire PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594617 DO - https://doi.org/10.1002/fam.3198 SN - 1099-1018 VL - 48 IS - 4 SP - 495 EP - 507 PB - Wiley CY - New York, NY AN - OPUS4-59461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nandish, Ranjith A1 - Knaust, Christian A1 - Hofmann-Böllinghaus, Anja A1 - Gnutzmann, Tanja A1 - Zehfuß, Jochen T1 - Simulation of wood pyrolysis with component-based mechanism N2 - This paper presents a comprehensive fire simulation study that models the pyrolysis process of beech wood using kinetic parameters with the Fire Dynamics Simulator (FDS). The kinetic methodology is based on the application of these kinetic parameters to govern the underlying pyrolysis reactions. The primary objective was to numerically model the pyrolysis process for beech wood using both single-component (single-step, single reaction scheme) and multi-component (single-step, multi-reaction scheme) kinetic reaction schemes. The accuracy of the numerical model was validated by comparing FDS simulation results with experimental data obtained from thermogravimetric analysis (TGA) and cone calorimeter tests. This approach aids in identifying reliable kinetic reaction input parameters for modelling wood fires. A case study was included to demonstrate the implementation of the kinetic reaction schemes. Numerical results from the TGA simulations for the small-scale pure cellulose test using the single-component approach exhibit consistency with the experimental data. Furthermore, the results demonstrated that the multi-component approach more accurately replicates the shape of the experimental curve for beech wood compared to the single-component approach. However, discrepancies in the tail regions of the curves obtained from the FDS simulations showed the need for further improvement in the modelling approach, particularly regarding the exclusion of char oxidation reactions, which needs to be investigated further. KW - Simulation KW - Wood PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639272 DO - https://doi.org/10.1007/s00231-025-03571-7 SN - 0947-7411 VL - 61 IS - 6 SP - 1 EP - 14 PB - Springer Science and Business Media LLC AN - OPUS4-63927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hofmann-Böllinghaus, Anja A1 - Klippel, Andrea A1 - Gnutzmann, Tanja A1 - Kaudelka, Sven A1 - Rabe, Frederik T1 - Influence of modern plastic furniture on the fire development in fires in homes: large-scale fire tests in living rooms N2 - About 80% of all fire fatalities in Germany occur because of fires in homes. It has been known for some time that modern materials (synonym for materials consisting mostly of synthetic polymers) tend to burn differently from older materials (synonym for materials consisting mostly of fibrous cellulosic substances) and it has been acknowledged that the amount of combustible plastics in homes has increased significantly over the last decades. To investigate the influence of modern furniture and ventilation conditions of fires in homes, a series of four large-scale tests in two Living rooms (LRs) with adjacent rooms (ARs) was performed by BAM and the Frankfurt fire service. Two LRs, one with older furniture and one with modern furniture, were tested twice each. Each test started with the ignition of a paper cushion on an upholstered chair. The influence of modern materials on the fire development was investigated, as well as the influence of the ventilation on the fire development. In all settings, an upholstered chair was the first burning item. Results of the test series show that fires in rooms with modern furniture develop faster than fires in rooms with older furniture. This is true for temperature development in the rooms as well as for smoke production. KW - Room fire KW - Furniture KW - Modern KW - Gas analysis KW - Smoke PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527568 DO - https://doi.org/10.1002/fam.2934 VL - 45 IS - 1 SP - 155 EP - 166 PB - Wiley CY - London AN - OPUS4-52756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manes, M. A1 - Sauca, A. A1 - El Houssami, M. A1 - Andersson, P. A1 - McIntyre, C. A1 - Campbell, R. A1 - Rush, D. A1 - Hofmann-Böllinghaus, Anja A1 - Wagner, P. A1 - Leene, M. A1 - Oberhagemann, D. A1 - Jomaas, G. A1 - Grone, F. A1 - Guillaume, E. T1 - Closing Data Gaps and Paving the Way for Pan-European Fire Safety Efforts: Part II—Terminology of Fire Statistical Variables N2 - A well-defined terminology of fire-related variables is important for correct analyses and supporting knowledge-based decisions regarding the evaluation of building fires at the European level. After developing an overview of current practices for fire statistics in Part I, the terminology used and the data collected by the EU Member States and eight other countries regarding fire incidents, property damage and human losses were mapped to increase awareness of their practice and support a comprehensive assessment of several fire statistical datasets. A questionnaire was distributed to relevant authorities responsible for the collection, elaboration/analysis, and fire statistical data publications to define and select the essential variables for an appropriate fire assessment and fire incident description. Based on the results of the questionnaire able to identify the essential fire statistical variables and a detailed analysis of current definitions adopted in the fire statistics of the EU Member States and other countries, a common terminology is proposed to collect the necessary data in the EU Member States and obtain meaningful datasets based on standardised terms and definitions. The results will generate essential outputs to move towards harmonised fire statistics at the EU level and contribute to an appropriate analysis able to improve fire prevention and fire mitigation in building fires. KW - Fire statistics PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575725 DO - https://doi.org/10.1007/s10694-023-01408-5 SN - 1572-8099 SP - 1 EP - 32 PB - Springer CY - Heidelberg AN - OPUS4-57572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Hofmann-Böllinghaus, Anja ED - Vogdt, F. U. T1 - Brandschutz N2 - Grundlagen des vorbeugenden baulichen Brandschutzes KW - Brandprüfungen KW - Bauvorschriften PY - 2022 SN - 978-3-8348-2189-8 SP - 199 EP - 220 PB - Springer ET - 1 AN - OPUS4-54317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR ED - Hofmann-Böllinghaus, Anja ED - Anderson, J. T1 - Special issue: Facade fire safety N2 - Façade fires are of growing concern worldwide. Severe facade fires in different parts of the world as well as activities in many countries regarding the testing of facades show the urgency of the fire safety challenges in façade fires. The need for knowledge and a wide Archive of work in this area has become evident after recent incidents which involved extensive facade fires. These include the tragic fires in Dubai and Grenfell Tower in 2017 in the United Kingdom. In many cases, the widespread live news coverage of the events and size of These fires has emphasized the need for progress in the understanding of the processes involved in these fires and put pressure upon the fire safety engineering community to find effective solutions. KW - Testing KW - Safety PY - 2021 UR - https://onlinelibrary.wiley.com/toc/10991018/2021/45/5 SN - 0308–0501 SN - 1099-1018 VL - 45 IS - 5 SP - 583 EP - 696 PB - Wiley CY - Oxford AN - OPUS4-53102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Eberwein, Robert T1 - Untersuchung der Gefährdung von Personen und Bauwerken in Folge des Versagens von LNG-Kraftstoffspeichern für Fahrzeuge in Tunneln N2 - Liquefied Natural Gas (LNG) aus regenerativen Quellen, stellt einen potenziellen Kraftstoff für den Schwer- und Fernverkehr des Straßenverkehrs dar. Gegenüber seinen positiven Eigenschaften zu dem in diesem Verkehrssektor häufig verwendeten Kraftstoff Diesel birgt der Kraftstoff aber auch Gefahren für Personen und Bauwerke durch seine sehr niedrige Temperatur bei der Speicherung von ca. -160 °C und seine Explosionsfähigkeit in der Gas-Phase. In der Arbeit wurde sich mit der Gefährdung von Personen und Bauwerken hinsichtlich der von LNG ausgehenden Gefahren in Tunneln auseinandergesetzt. Tunnel stellen besonders schützenswerte Bauwerke dar, da aus vorhergehenden Störfällen in Tunneln bekannt ist, dass diese mit hohen Personen-, Bauwerks-, und Volkswirtschaftlichen-Schäden einhergehen können. Untersuchungsschwerpunkt bei der Bewertung von Gefährdungen durch LNG stellte eine Ereigniskaskade bestehend aus Freisetzung, Verdampfung, Stoffausbreitung und Zündung des sich gebildeten explosionsfähigen LNG-Gas/Luft-Gemisches dar. Mit dem Ziel eine solche Ereigniskaskade realitätsnah vorhersagen und zukünftig hierzu Risikoanalysen durchführen zu können wurden innerhalb der Arbeit Parameterstudien sowie Kalibrierungen und Validierungen gegenüber experimentellen Untersuchungen durchgeführt. Mit den Modellen wurden in der Arbeit exemplarische Fallbeispiele zu Störfällen untersucht. Ergebnisse dieser waren, dass Gefährdungen insbesondere von flüssigem LNG nach dessen Freisetzung und der Verbrennung von LNG-Gas/Luft-Gemischen ausgingen. N2 - Liquefied Natural Gas (LNG) from regenerative sources is a potential fuel for heavy and long-distance road traffic. In contrast to its positive properties compared to diesel, which is often used in this transport sector, the fuel also contains hazards from its very low storage temperature of approx. -160 °C and its explosiveness in the gas phase for personal and structural safety. The dissertation dealt with the dangers to persons and infrastructures according to the hazards by LNG in tunnels. Tunnels are especiallyworth protecting structures since it is known from previous incidents in tunnels that they can go hand in hand with high damage to the people, the structure, and the economy. The main focus of the investigation into the assessment of hazards from LNG was an event cascade consisting of release, evaporation, dispersion, and ignition of the explosive LNG-vapor/air-mixture formed. To realistically predict such an event cascade and being able to carry out risk analyzes for this purpose in the future, parameter studies such as calibrations and validations were carried out concerning experimental investigations. Exemplary case studies on incidents were examined in the thesis with the validated models. The results of this were that there were especially hazards in particular from liquid LNG after its release and the combustion of LNG-vapor/air-mixtures. KW - Verflüssigtes Erdgas KW - Erneuerbare Energien KW - Numerische Strömungsmechanik KW - Sicherheitstechnik KW - Liquefied Natural Gas KW - LNG KW - Renewable fuels KW - CFD KW - Safety engineering PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521145 DO - https://doi.org/10.14279/depositonce-11346 SP - 1 EP - 240 PB - TU Berlin CY - Berlin AN - OPUS4-52114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Camplese, Davide T1 - Safety assessment of MLI super-insulation systems for cryogenic liquid-hydrogen tanks in fire scenarios N2 - In the context of green energy transition, cryogenic tanks featuring MLI systems are emerging as a leading solution to store hydrogen in heavy-duty vehicles. However, the integrity of such tanks can be jeopardized by fire. In such a scenario, MLI materials degradation can occur, leaving the tank unprotected from the fire heat flux, with consequent rapid pressurization and a high risk of failure. This study presents an assessment of aluminum-based MLI for liquid hydrogen cryogenic tanks under fire exposure based on the estimation of the time to mechanical failure of the equipment. This is calculated through an innovative model that simulates the thermomechanical response of the tank, including the MLI thermal degradation and the pressure-relief valve (PRV) operation. The application to several case studies that consider a typical LH2 tank featuring a wide range of MLI configurations demonstrated the likelihood of failure in case of exposure to a hydrocarbon pool fire, providing also comprehensive insights into the impact of the insulation characteristics and operating conditions on the time to failure. T2 - 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - LH2 KW - Insulation KW - Tanks KW - Fire KW - LNG PY - 2025 AN - OPUS4-63427 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Modelling Fire Response of Cryogenic Liquid Hydrogen Tanks Equipped with Multilayer Insulation (MLI) Systems N2 - In the context of the growing global interest in hydrogen-based green energy, cryogenic tanks equipped with multi-layer insulation (MLI) are emerging as a leading solution for storing hydrogen in vehicles. The integrity of these systems might be threatened during fire exposure. This can trigger the degradation of the MLI materials and induce rapid pressurization of the tank with a high risk of catastrophic failure. In this work, a novel lumped model to simulate the thermal response of MLI-equipped cryogenic liquid hydrogen tanks is presented. The model integrates the accurate database “Coolprop” for hydrogen thermodynamic properties and sub-models for detailed simulation of MLI degradation, providing a realistic simulation of the experimental data obtained under normal operating conditions. The application of the model to several case studies considering different numbers of MLI layers and tank geometries demonstrates that aluminum-based MLI offers scarce protection in case of exposure to a hydrocarbon poolfire. T2 - CISAP 11 CY - Neapel, Italy DA - 15.09.2024 KW - LH2 KW - LNG KW - Cryogenic storage tank KW - Insulation KW - MLI PY - 2024 DO - https://doi.org/10.3303/CET24111076 SN - 2283-9216 VL - 111 SP - 451 EP - 456 PB - AIDIC The Italian Association of Chemical Engineering AN - OPUS4-61384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -