TY - CONF A1 - Balscheit, Hagen T1 - Buckling Design of Soil Embedded Piles N2 - Monopiles sind die gängigste Gründungskonstruktion für Offshore-Windkraftanlagen, doch größere Turbinen erfordern Pfahldurchmesser über 10 m und Pfahllängen über 60 m, was das Risiko von lokalem Beulen in den eingebetteten Bereichen erhöht. Aktuelle Richtlinien berücksichtigen die Pfahl-Boden-Interaktion nicht ausreichend so dass nur ein vollständig numerischer GMNIA-Nachweis geführt werden kann. Für derartige Berechnungsmodelle fehlen allerdings derzeit noch validierungswerte für eingebettete Schalen. Experimente im Rahmen des VERBATIM-Projekts schließen diese Lücke. T2 - Phd Conference Univiersity Innsbruck CY - Innsbruck, Austria DA - 05.02.2025 KW - Buckling KW - Wind Energy KW - Monopile Foundation PY - 2025 AN - OPUS4-62534 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - KI-unterstützte Begutachtung der Behältersicherheit N2 - Die BAM führt sicherheitswissenschaftliche Begutachtungen von Gefahrgutbehältern durch, die mechanische, thermische, abschirmende und transportbezogene Analysen sowie Materialbewertungen und experimentelle Prüfungen umfassen. Diese Begutachtungen basieren auf umfassenden Sicherheitsberichten und Betriebsdokumentationen, die zahlreiche verknüpfte Dokumente und Daten enthalten. Änderungen an Komponenten oder regulatorischen Vorgaben können große Auswirkungen auf den Prüfumfang haben. Das Projekt sieht vor, die Datenanalyse und -bereitstellung mittels KI-Ansätzen zu verbessern. Es sollen Methoden zur automatischen Analyse und Verknüpfung komplexer Dokumentationen entwickelt werden. Ziel ist es, die Effizienz und Sicherheit der Datenanalyse und späteren Sicherheitsbewertung zu steigern, menschliche Fehler zu minimieren und die Qualität der Sicherheitsbewertungen zu verbessern. Die Qualität der Datenbereitstellung aus Zeichnungen, Tabellen, Texten und Berechnungen ist entscheidend für die Verarbeitung digitaler Formate der Behälterdokumentation. Ein neuro-symbolischer KI-Ansatz kombiniert neuronale Netze und symbolische KI, um die komplexen Inhalte zu analysieren und zu verknüpfen, was für die spätere Sicherheitsbewertung der Gefahrgutbehälter entscheidend ist. In vortrainierten Large Language Models (LLMs) fehlen für diesen Anwendungsfall spezifische fachliche Daten zur Behältersicherheit was zu fehlerhaften Ergebnissen führen kann. Für die Datenbereitstellung und Analyse im Zuge einer Sicherheitsbewertung gilt es dieses auszuschließen. Hierzu soll die RAG-Architektur (Retrieval-Augmented Generation) im Zusammenspiel mit LLMs angewendet werden. Dieser neue Ansatz der natürlichen Sprachverarbeitung und generativen KI soll die Stärken vortrainierter Sprachmodelle mit Fachwissen und Informationen aus Datenbanken und Dokumentensammlungen kombinieren. Die generierten Ergebnisse sollen dabei zusammen mit den verwendeten Quellen bereitgestellt werden, um eine fundierte und nachvollziehbare Basis für die Sicherheitsbewertung bilden. T2 - Informationsaustausch zur verkehrsrechtlichen Aufsicht bei der Beförderung radioaktiver Stoffe CY - Bonn, Germany DA - 04.02.2025 KW - KI KW - RAG KW - LLM PY - 2025 AN - OPUS4-62538 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Krankenhagen, Rainer A1 - Chaudhuri, Somsubhro A1 - Stamm, Michael A1 - Lapšanská, Ivana A1 - Aderhold, J. A1 - Schlüter, F. T1 - EvalTherm – Evaluierung der passiven Thermografie für die Zustandsbewertung von Rotorblättern an Windenergieanlagen N2 - Der Bericht gibt einen Überblick über im Rahmen des Projektes durchgeführte Forschungsarbeiten sowie ausgewählte Ergebnisse. Er wurde zusammen mit dem FhI für Holzforschung (WKI) erstellt. KW - Rotorblattinspektion KW - Passive Thermografie KW - Feldmessungen KW - Windturbine PY - 2025 N1 - Schlussbericht des Projektes N1 - Laufzeit: 1.9.2020 – 31.8.2024 N1 - Das Verbundprojekt wurde im Rahmen des 7. Energieforschungsprogramms "Innovationen für die Energiewende" gefördert N1 - Das Vorhaben wurde mit Mitteln des Bundesministeriums für Wirtschaft und Klima unter dem Förderkennzeichen 03EE3035A/B gefördert SP - 1 EP - 67 PB - Technische Informationsbibliothek (TIB) CY - Hannover AN - OPUS4-62647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nietzke, Jonathan T1 - H2HohlZug: Standardisation of a New, Cost-effective Method for Material Characterisation for the Hydrogen Economy N2 - The feasibility of the method for slow strain tensile tests has been demonstrated in several studies, leading to the establishment of the ISO/TC 164/SC 1/WG 9 ISO committee for its standardisation. Questions have emerged during this process, that currently prevent the method from being standardised for hydrogen testing. These questions relate to specimen geometry, specimen manufacturing and gas quality and are being systematically addressed in the TransHyDE-H2HohlZug project. T2 - TrasnsHyDE Abschlusskonferenz CY - Berlin, Germany DA - 25.03.2025 KW - Hydrogen KW - Hydrogen Embrittlement KW - High-Pressure Gaseous Gas KW - Hollow Specimen Technique KW - TransHyDE KW - H2HohlZug PY - 2025 AN - OPUS4-62823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rodricks, Carol T1 - Recyclable or One-Way Composites? Evaluating the Durability of Elium vs. Epoxy Glass Fibre Composites N2 - Fibre-reinforced polymers are widely used, particularly in lightweight construction, due to their high strength-to-weight ratio and versatility. The expansion of wind turbines calls for ever-lighter materials, and polymer matrix composites are well-positioned to meet this need, offering the necessary strength and long-term durability with reduced weight. However, conventional thermoset composites, such as epoxy-based systems, pose significant recycling challenges as they cannot be easily reprocessed or remoulded. A promising alternative is Elium, a novel thermoplastic resin that offers mechanical properties similar to thermoset polymers while providing the added benefit of chemical recyclability through solvolysis in acetone. This raises an important question: can a recyclable Elium composite match or even surpass the durability of a conventional epoxy composite, particularly in demanding structural applications? In our study, we compare the fatigue performance of Elium (191SA, 151-XO) glass fibre composites to conventional epoxy (RIMR 135, RIMH 137) glass fibre composites. Results indicate that Elium composites demonstrate superior fatigue resistance compared to their epoxy counterparts. The combination of enhanced fatigue durability and chemical recyclability highlights the potential of Elium composites as a sustainable alternative to conventional epoxy-based systems for long-term structural applications. T2 - Materials Week 2025 CY - Frankfurt am Main, Germany DA - 02.04.2025 KW - Polymer matrix composites KW - Recycling KW - Elium KW - Fatigue performance PY - 2025 AN - OPUS4-62936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spindlegger, Anna A1 - Slotyuk, Lyubov A1 - Jandric, Aleksander A1 - De Souza, Ricardo Gabbay A1 - Prenner, Stefanie A1 - Part, Florian T1 - Environmental performance of second-life lithium-ion batteries repurposed from electric vehicles for household storage systems N2 - Repurposing lithium-ion batteries has proven to be a promising solution to address the rising number of end-of-life batteries that can be used for second-life energy storage systems and thus extend their service life. While previous research has provided valuable insights into the environmental benefits of battery repurposing, there is still a need to examine the repurposing process more thoroughly, in order to make well-informed decisions on the implementation of second-life battery storage systems. Therefore, this study examines the influence of different repurposing strategies on the environmental performance of second-life battery energy storage systems. A life cycle assessment was conducted, analysing four repurposing cases relating to the exchange of components, namely i) new battery management system and module casing (Base case), ii) new battery management system and reuse of module casing (Case 1), iii) new module casing and reuse of battery management system (Case 2) and iv) reuse of module casing and battery management system (Case 3). These impacts were compared to a storage system with new batteries, to determine the potential environmental benefits and identify the most suitable repurposing strategy. Our findings demonstrate significant environmental benefits of second-life battery energy storage systems across various impact categories and repurposing cases. The Base case and Case 1 resulted in environmental benefits across all impact categories. The highest benefits were observed for metal depletion with savings of 58 % and 61 %, respectively. Increased savings were obtained for Case 2 and Case 3. However, environmental drawbacks were identified for freshwater and marine ecotoxicity. In particular, Case 2 resulted in the highest drawbacks of -22 % and -16 %, respectively. These can be attributed to the allocation procedure, particularly affecting the recycling credits of battery management system recycling. The full allocation of end-of-life impacts and consequently the recycling credits to the second-life battery has not only led to a substantial increase in overall savings, but also resulted in impact categories that originally had disadvantages becoming those with the highest environmental savings. This study demonstrates the importance of carefully selecting repurposing strategies for second-life energy storage systems to maximize their environmental benefits and avoid drawbacks. Additionally, the results highlight the substantial influence of allocation procedures on overall environmental impacts, underscoring the need for clearer methodological guidance on addressing the multifunctionality of repurposed batteries. KW - Life cycle assessment KW - Repurposing KW - Second-life battery KW - Lithium-ion battery KW - Battery energy storage system KW - Circular economy PY - 2025 DO - https://doi.org/10.1016/j.spc.2025.01.003 SN - 2352-5509 VL - 54 SP - 227 EP - 240 PB - Elsevier CY - Amsterdam AN - OPUS4-62940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chaudhuri, Somsubhro A1 - Junker, Birgit T1 - Infrared thermography as an inspection tool for wind turbine rotor blades N2 - With the rapid expansion of wind turbine construction, rotor blades have increasingly been identified as a primary cause of turbine downtime and failure. This has led to a growing demand for inspection technologies through which energy production losses can be minimised—particularly in comparison to conventional methods such as rope-access inspections—and through which sub-surface blade conditions can be assessed to detect damage or failure in advance. Infrared thermography has been considered as a promising non-contact, full-field inspection method that can be applied to rotor blades in both operational and idle states. In this presentation, delivered at BladesEurope 2025, the physical mechanisms that give rise to thermal contrast during thermographic inspection were explained, as this contrast enables the detection and visualisation of structural features. Results obtained from a collaborative project between BAM and Statkraft Norway were presented, followed by the validation of a finite element simulation through experiments conducted in a climate chamber.” T2 - BladesEurope Forum 2025 CY - Edinburgh, Scotland DA - 29.04.2025 KW - Thermography KW - Wind energy KW - Inspection KW - Windenergie anlage rotorblätte KW - Damage detection PY - 2025 AN - OPUS4-63060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nagel, Thomas A1 - Rühaak, Wolfram A1 - Amann, Florian A1 - Bracke, Guido A1 - Buske, Stefan A1 - Kowalski, Julia A1 - Reiche, Sönke A1 - Schäfer, Thorsten A1 - Scheytt, Traugott A1 - Stumpf, Thorsten A1 - Völzke, Holger A1 - Wellmann, Florian A1 - Kolditz, Olaf T1 - Deep geological disposal - Editorial to the topical collection N2 - The subsurface geological environment, historically a key source of fossil and mineral resources, has seen a significant broadening of its potential applications in recent years, with increasing emphasis on its use for energy production and storage. A critical factor in utilizing subsurface space is ensuring the sustainability of management practices, with particular attention to the potential environmental impacts that may result. The current Topical Collection on Deep Geological Disposal places greater emphasis on the geotechnical aspects of geological disposal, with a particular focus on the safe isolation of hazardous materials, including radioactive waste. The Topical Collection on Deep Geological Disposal covers both experimental (laboratory and in-situ) and theoretical studies of various geotechnical applications, such as geological disposal of radioactive or other materials, e.g. coal-based solid waste, carbon dioxide sequestration in fractured reservoirs, and brine solutions, but also aspects of uranium mining. The articles in the Topical Collections are arranged under the following headings: – Fundamental studies – Experimental studies – Numerical studies KW - Disposal KW - Radioactive Waste KW - Geology PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-624955 DO - https://doi.org/10.1007/s12665-024-12075-2 SN - 1866-6299 VL - 84 IS - 3 SP - 1 EP - 6 PB - Springer Nature AN - OPUS4-62495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strangfeld, Christoph A1 - Müller-Vahl, H. F. A1 - Nayeri, C. N. A1 - Paschereit, C. O. A1 - Greenblatt, D. T1 - Airfoil synchronous surging and pitching N2 - Combined surging and pitching of an airfoil at the identical frequency (i.e. synchronously), at four different phase differences, was investigated theoretically and experimentally. The most general unsteady theoretical formulation was adopted to calculate the lift coefficient, and then extended to explicitly compute the unsteady bound vortex sheet. This was used for comparison with experiments and facilitated the computation of both Joukowsky and impulsive-pressure lift contributions. Experiments were performed using a symmetric 18 % thick airfoil in an unsteady wind tunnel at an average Reynolds number of 3.0*10^5 , with a free-stream oscillation amplitude of 51 %, an angle-of-attack range of 2° +- 2° and a reduced frequency of 0.097. In general, excellent correspondence was observed between theory and experiment, representing the first direct experimental validation of the general theory. It was shown, both theoretically and experimentally, that the lift coefficient was not accurately represented by independent superposition of surging and pitching effects, due to variations in the instantaneous effective reduced frequency not accounted for during pure pitching. Deviations from theory, observed at angle-of-attack phase leads of 90° and 180°, were attributed to bursting of separation bubbles during the early stages of the acceleration phase. The largest deviations occurred when the impulsive-pressure lift contribution was small relative to the Joukowsky contribution, because the latter was most affected by bubble bursting. Bubble bursting resulted in large form-drag oscillations that occurred at identical phase angles within the oscillation cycle, irrespective of the phase difference between surging and pitching, as well as in the absence of pitching. KW - Unsteady aerodynamics KW - Dynamic stall KW - Separation bubble KW - Bubble bursting PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630068 DO - https://doi.org/10.1017/jfm.2025.220 SN - 1469-7645 VL - 1009 SP - 1 EP - 33 PB - Cambridge University Press (CUP) AN - OPUS4-63006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brunner, Nanine T1 - Digital Certificates: Enabling Automation in Quality Assurance and Metrological Traceability N2 - This presentation describes how the Digital Calibration Certificate (DCC) for temperature was implemented in the accredited calibration laboratory at BAM. It includes an overview of the integration of the digital calibration symbol (digital seal) to ensure authenticity, integrity, and traceability of the certificate. The DCC is provided in a structured XML format, enabling machine-readability and seamless data integration into digital processes. A demonstrator developed within the QI-Digital project is presented to showcase the practical advantages of the DCC over traditional paper or PDF-based certificates — including automation, data security, and improved usability in digital quality infrastructure systems. T2 - Sensor and Measurement Science International (SMSI) CY - Nuremberg, Germany DA - 05.05.2025 KW - DCC KW - QI Digital KW - Demonstrator KW - SMSI in Nürnberg 2025 PY - 2025 AN - OPUS4-63100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -