TY - CONF A1 - Piechotta, Christian A1 - Hein, Sebastian A1 - von Törne, Jannik Wipert A1 - Kaminski, Katja A1 - Klyk-Seitz, Urszula-Anna T1 - NSO-Heterozyklen – Zwischen Rattengift und Normung N2 - Warfarin als ein Vertreter der NSO-Hetereozyklen, ist seit den 1950er Jahren einer der bekanntesten Gerinnungshemmer. Beim Menschen wird es bis heute zur Vorbeugung von Thrombose und der Behandlung von Vorhofflimmern und Arrhythmie eingesetzt. Doch schon einige Jahre vor der FDA Zulassung als Medikament wurde es zur Bekämpfung von Nagetieren eingesetzt. Bis heute wurde es nur teilweise durch weitaus wirksamere antikoagulante Rodentizide (ARs) der zweiten Generation, sogenannte Superwarfarine, ersetzt. In der Fachliteratur finden sich zahlreiche Beispiele für sekundäre und tertiäre Vergiftung mit ARs bei Wildtieren und anderen Nichtzieltieren. Bisher ist relativ wenig über die Bioakkumulation, Persistenz und Toxizität von ARs und deren Transformationsprodukten (TPs) in der terrestrischen und aquatischen Umwelt, sowie der Nahrungskette bekannt. Um Einblicke in mögliche Transformations- und Abbauprozesse von Warfarin zu erhalten und um Umwelteinflüsse zu simulieren, wurde es in einer elektrochemischen Reaktorzelle oxidativ umgesetzt und mittels Massenspektrometrie analysiert. Hinsichtlich der Wasseraufbereitung in Kläranlagen wurden technisch relevante Simulationsverfahren wie Chlorung, UV-Bestrahlung und Ozonung angewendet um potentielle Eliminierungswege aufzuklären. Gebildete Transformationsprodukte wurden daher mittels unterschiedlicher chromatografischer Verfahren getrennt, massenspektrometrisch analysiert und verglichen. T2 - MS-Tage CY - Düsseldorf, Germany DA - 03.12.2019 KW - GC-MS KW - Warfarin KW - NSO-Heterozyklen PY - 2019 AN - OPUS4-49974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Palkowski, Carsten A1 - Zottl, A. A1 - Malenkovic, I. A1 - Simo, Anne T1 - Fixing efficiency values by unfixing compressor speed: Dynamic test method for heat pumps N2 - The growing market penetration of heat pumps indicates the need for a performance test method that better reflects the dynamic behavior of heat pumps. In this contribution, we developed and implemented a dynamic test method for the evaluation of the seasonal performance of heat pumps by means of laboratory testing. Current standards force the heat pump control inactive by fixing the compressor speed. In contrast, during dynamic testing, the compressor runs unfixed while the heat pump is subjected to a temperature profile. The profile consists of the different outdoor temperatures of a typical heating season based on the average European climate and also includes temperature changes to reflect the dynamic behavior of the heat pump. The seasonal performance can be directly obtained from the measured heating energy and electricity consumption making subsequent data interpolation and recalculation with correction factors obsolete. The method delivers results with high precision and high reproducibility and could be an appropriate method for a fair rating of heat pumps. KW - Heat pump KW - Dynamic test method KW - Seasonal performance factor KW - Variable frequency drive KW - Energy label PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-476944 DO - https://doi.org/10.3390/en12061045 SN - 1996-1073 VL - 12 IS - 6 SP - 1045, 1 EP - 16 PB - MDPI CY - Basel, Switzerland AN - OPUS4-47694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Zottl, A. T1 - Dynamische Energieeffizienzprüfung von Wärmepumpen N2 - Die bisher üblichen Verfahren zur Bewertung der Effizienz einer Wärmepumpe durch Labormessungen berücksichtigen kaum transiente Zustände. Können dynamische Bewertungsverfahren im Labor ein realistischeres Verhalten im Feld wiederspiegeln und damit zu sinnvolleren Entscheidungen führen? T2 - Chillventa 2018 CY - Nuremberg, Germany DA - 15.10.2018 KW - Wärmepumpen KW - Energieeffizienz KW - Dynamische Prüfung KW - Methodenentwicklung KW - Energielabel PY - 2018 AN - OPUS4-46343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - von Schwarzenberg, Stefan A1 - Simo, Anne T1 - Dynamic testing to better reflect real use for the seasonal performance of air conditioners N2 - In this contribution, a dynamic test method to determine the seasonal performance of invertertype air conditioners has been developed and verified. In comparison to current test standards, where test modes for fixing the compressor speed are required, a dynamic approach is applied with unfixed compressor speed and thus better reflects the performance of air conditioners under real operating conditions. The dynamic tests are conducted in two calorimeter chambers. The indoor chamber is kept at a constant temperature whereas the outdoor chamber is subjected to a temperature profile based on the climate BIN-distribution, representing the reference cooling demand. The proposed dynamic test considers the dynamic control of an air conditioner and delivers results which could indicate the units' performance in the field. T2 - 25th International Congress of Refrigeration 2019 CY - Montréal, Canada DA - 25.09.2019 KW - Seasonal Performance Factor KW - Inverter-type Air Conditioner KW - Dynamic Test Method KW - Real Use Behavior PY - 2019 SN - 978-2-36215-035-7 SN - 1025-9031 SP - 672, 3891 EP - 3899 PB - International Institute of Refrigeration IIR CY - Paris AN - OPUS4-48865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Simo, Anne T1 - Quick Seasonal Performance Testing for Heat Pumps N2 - To determine the seasonal performance of heat pumps for energy labelling this study proposes a two-point-method that could conceivably be an alternative to the European standard EN 14825 and similar test standards such as ISO 13256. Heat pumps were tested in line with the EN 14825. The reduction of measurement points, from between five to seven (EN 14825) to only two (two-point-method), leads to 60 % savings in cost and time. It is shown that the shortened method can be used to determine the seasonal energy efficiency of heat pumps with the same degree of precision compared to EN 14825. T2 - ECEEE Summer Study 2019 CY - Hyerès, France DA - 03.06.2019 KW - Heat pump KW - Energy label KW - Testing KW - Coefficient of performance KW - Screening PY - 2019 SP - 1547 EP - 1552 AN - OPUS4-48275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Palkowski, Carsten A1 - Schwarzenberg, S. A1 - Simo, Anne T1 - Seasonal cooling performance of air conditioners: The importance of independent test procedures used for MEPS and labels N2 - Minimum energy performance standards and labels are commonly used tools to reduce the household energy use thus mitigating greenhouse gas emissions. However, the technical foundation for minimum energy performance standards and labels are test procedures for rating and testing of appliances. To de- termine the seasonal cooling performance of air conditioners, the current test standards require fixing of the compressor speed of the units to achieve steady-state conditions; this way of operation, how- ever, differs from real-life use. To make the seasonal cooling performance testing better reflect the real use conditions, this study proposes a compensation method which can be conducted independently from manufacturer data and still allows modulation of the tested units. Our results show that the tested units behave differently under part-load conditions, which results in a lower energy efficiency rating for some of the tested devices. KW - Air conditioner KW - Independent test method KW - Real use behavior KW - Seasonal energy efficiency ratio KW - Minimum energy performance standards KW - Energy label PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-485813 DO - https://doi.org/10.1016/j.ijrefrig.2019.05.021 SN - 0140-7007 VL - 104 SP - 417 EP - 425 PB - Elsevier AN - OPUS4-48581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Test methods for air conditioners N2 - Comparison of test methods for air conditioners that are currently discussed in standardization. The limitations of the current standard are shown and different options for the further development of the standard are presented T2 - Arbeitsgruppensitzung des Fachverbands Gebäude-Klima CY - Online meeting DA - 28.05.2020 KW - air conditioner KW - test method KW - Load-based testing KW - energy label PY - 2020 AN - OPUS4-50829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Wachau, André A1 - Simo, Anne T1 - Test methods for heat pumps N2 - Comparison of different test methods for the determination of the seasonal performance of heat pumps: 1) The current test standard EN14825, 2) the compensation test method and 3) the dynamic test method. T2 - Impact Assessment / Consultation Space and Water Heaters WG2 Testing CY - Online meeting DA - 02.04.2020 KW - Heat pump KW - Energy label KW - Seasonal performance KW - Compensation method KW - Dynamic method PY - 2020 AN - OPUS4-50713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Heat Pumps N2 - Kickoff meeting for the BAM round robin test for load-based heat pump testing T2 - Kickoff meeting BAM RRT for heat pumps CY - Online meeting DA - 26.03.2020 KW - Heat pump KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Air Conditioner N2 - Kickoff meeting for the BAM round robin test for load-based air conditioner testing. T2 - Kickoff meeting BAM RRT for air conditioner CY - Online meeting DA - 26.03.2020 KW - Air conditioner KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Dynamic Test Method - an Update N2 - An update about the dynamic test method for the determination of the seasonal performance of heat pumps given at the CEN/TC 113/WG 7 meeting. T2 - Meeting of CEN/TC 113/WG 7 CY - Courbevoie, France DA - 14.01.2020 KW - Heat pump KW - Dynamic test method KW - Seasonal performance KW - Coefficient of performance PY - 2020 AN - OPUS4-50579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - BAM Round Robin Test for Heat Pumps and Air Conditioners N2 - Preliminary results of the BAM RRTs are given in this presentation. T2 - VHK Meeting CY - Online meeting DA - 11.11.2020 KW - Heat Pumps KW - Air Conditioners KW - Round Robin Test KW - Load-Based Test Method KW - Energy Label PY - 2020 AN - OPUS4-51969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Dynamic Test Method for Heat Pumps and Air Conditioners N2 - Die bisher üblichen Verfahren zur Bewertung der Effizienz einer Wärmepumpe durch Labormessungen berücksichtigen kaum transiente Zustände. Können dynamische Bewertungsverfahren im Labor ein realistischeres Verhalten im Feld wiederspiegeln und damit zu sinnvolleren Entscheidungen führen? N2 - The commonly used methods for evaluating the seasonal performance of heat pumps in the laboratory do not consider transient conditions. Will dynamic test methods be able to better reflect real-life behavior in the field and thus lead to more appropriate decision-making? T2 - EHPA MCO CY - Brussels, Belgium DA - 10.10.2019 KW - Heat pump KW - Inverter-type air conditioner KW - Seasonal performance KW - Energy label PY - 2019 AN - OPUS4-49270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Simo, Anne T1 - Quick Seasonal Performance Testing for Heat Pumps N2 - To determine the seasonal performance of heat pumps for energy labelling this study proposes a two-point-method that could conceivably be an alternative to the European standard EN 14825 and similar test standards such as ISO 13256. Heat pumps were tested in line with the EN 14825. The reduction of measurement points, from between five to seven (EN 14825) to only two (two-point-method), leads to 60 % savings in cost and time. It is shown that the shortened method can be used to determine the seasonal energy efficiency of heat pumps with the same degree of precision compared to EN 14825. T2 - ECEEE Summer Study 2019 CY - Hyerès, France DA - 03.06.2019 KW - Heat pump KW - Energy label KW - Testing KW - Coefficient of performance KW - Screening PY - 2019 AN - OPUS4-48274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Schlegel, Moritz-Caspar A1 - Akkerman, Floris A1 - Simo, Anne T1 - How cool? - Energy label for air conditioners and possibilities for circumvention N2 - In this study, the test method EN 14825 for testing air conditioners is validated by verifying the sensitivity of the seasonal energy efficiency ratio SEER (declared on the energy efficiency label) in relation to the nominal cooling capacity Pdesign. Therefore, the two major parts of the test method, the measurement part and the calculation part, were investigated. Measurements were conducted on several single-split units. The calculation part was subjected to a sensitivity analysis in order to identify the properties of an air conditioner which have a strong influence on the SEER. The analysis revealed that the measurement procedure delivers reproducible results. However, the energy consumption in special operating states, the duration in active-mode and seasonal performance values in active mode (SEERon) significantly affect the sensitivity of the SEER. Especially assumption of short operating times for a cooling active mode leads to large changes in the SEER with varying Pdesign. In addition, the range of power of Pdesign turned out to have an increasing impact on the SEER with decreasing Pdesign. For Pdesign values ≤10 kW, which is the most popular type of ACs in the EU, the sensitivity of the SEER increases tremendously. Especially the determination of the SEER for devices with short operating times in cooling active-mode (350 h) and low values for Pdesign (≤10 kW) cannot be reproduced anymore. In consequence, manufacturer could use the sensitivity of the SEER on Pdesign to artificially “increase” the energy efficiency of their air conditioner for the Energy label about 10 %. T2 - World Sustainable Energy Days CY - Wels, Austria DA - 28.02.2018 KW - Air Conditioner KW - Energy Efficiency KW - Circumvention KW - Energy Label PY - 2018 AN - OPUS4-47480 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Dynamische Methode für die Energieeffizienzprüfung von Wärmepumpen N2 - Vorstellung der Dynamische Wärmepumpenprüfung beim DIN NA-044-00-06 AA T2 - Gremiunssitzung des NA 044-00-06 AA CY - Munich, Germany DA - 19.02.2019 KW - Wärmepumpen KW - Energieeffizienz KW - Dynamische Prüfung PY - 2019 AN - OPUS4-47414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - von Schwarzenberg, Stefan A1 - Simo, Anne T1 - Dynamic testing of air conditioners to better reflect real use N2 - In this contribution, a dynamic test method to determine the seasonal performance of invertertype air conditioners has been developed and verified. In comparison to current test standards, where test modes for fixing the compressor speed are required, a dynamic approach is applied with unfixed compressor speed and thus better reflects the performance of air conditioners under real operating conditions. The dynamic tests are conducted in two calorimeter chambers. The indoor chamber is kept at a constant temperature whereas the outdoor chamber is subjected to a temperature profile based on the climate BIN-distribution, representing the reference cooling demand. The proposed dynamic test considers the dynamic control of an air conditioner and delivers results which could indicate the units’ performance in the field. T2 - 25th International Congress of Refrigeration 2019 CY - Montréal, Canada DA - 25.09.2019 KW - Seasonal Performance Factor KW - Inverter-type Air Conditioner KW - Dynamic Test Method KW - Real Use Behavior PY - 2019 AN - OPUS4-48864 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Dynamic Test Method for Heat Pumps N2 - Vorstellung der Dynamischen Wärmepumpenprüfung beim CEN/TC 113/WG 7 N2 - Presentation of the dynamic test method for the determination of the seasonal performance of heat pumps at CEN/TC 113/WG 7. T2 - Meeting of CEN/TC 113/WG 7 CY - Stockholm, Sweden DA - 23.04.2019 KW - Heat pump KW - Energy label KW - Seasonal performance KW - Coefficient of performance PY - 2019 AN - OPUS4-48308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nitsche, Michael T1 - Federal Research & development supports market surveillance N2 - Example: Testing and rating of heat pumps and air conditioners Example: Surveillance of Toys Example: Safety of compressed gas storage vessels for Hydrogen T2 - EU Market Surveillance Conference 2020 CY - Online meeting DA - 05.11.2020 KW - Market surveillance PY - 2020 AN - OPUS4-51930 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nisi, A. A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Blind, K. T1 - Effetti della pandemia COVID-19 sulle attività di valutazione della conformità svolte da organismi e laboratori accreditati in Italia N2 - Die Studie fasst Ergebnisse einer Befragung von Konformitätsbewertungsstellen in Italien zu deren Lage und den Aussichten während der Corona-Pandemie zusammen. Besondere Schwerpunkte wurden auf die wirtschaftlichen Auswirkungen und die Arbeitsfähigkeit, aber auch auf die Resilienz und die Wirkungen auf die Digitalisierung gelegt. N2 - Lo scoppio della pandemia da Covid-19 ha travolto Italia a inizio anno e i suoi effetti sull’economia sono stati particolarmente pesanti. Proprio per analizzare gli effetti della pandemia sul mercato della valutazione della conformità, lo scorso settembre Accredia, in collaborazione con l’Istituto Federale tedesco della Ricerca e del Collaudo dei Materiali (BAM), la Technische Universität di Berlino e l’Istituto Fraunhofer ISI, ha condotto un’indagine presso gli organismi e i laboratori accreditati in Italia. KW - Corona KW - Konformitätsbewertungsstellen KW - Resilienz KW - COVID-19 KW - Qualitätsinfrastruktur KW - Zertifizierung KW - Kalibrierung KW - Digitalisierung KW - Konformitätsbewertung KW - Laboratorium KW - Prüfung PY - 2020 UR - https://www.accredia.it/pubblicazione/corona-monitor-effetti-della-pandemia-da-covid-19-sulle-attivita-accreditate/ SP - 1 EP - 22 CY - Rom, Italien AN - OPUS4-51975 LA - ita AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Abad Andrade, Carlos Enrique A1 - Riedel, Jens A1 - Vogl, Jochen A1 - Panne, Ulrich T1 - Lithium isotope analysis combining atomic absorption spectroscopy and machine learning N2 - In this poster for the SCIX Conference, we apply an analytical procedure based on the monitoring of the lithium isotope through the partially resolved isotope shift in the electronic transition 22P<-22S around wavelength 670.80 nm using high-resolution continuum source atomic absorption spectrometer (HR-CS-AAS) in combination with machine learning (ML) for the determination of Li Isotope ratio analysis. T2 - SCIX Conference CY - Providence, RI, USA DA - 26.09.2021 KW - Lithium isotope KW - High-resolution continuum source atomic absorption spectrometer KW - Machine learning PY - 2021 AN - OPUS4-53686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Riedel, Jens A1 - Vogl, Jochen A1 - Panne, Ulrich A1 - Abad Andrade, Carlos Enrique T1 - Atomic absorption spectrometry with machine learning as a tool for lithium isotope analysis N2 - The general interest in the implementation of renewable energies, particularly in the development of lithium-ion batteries, makes lithium a key element to be analyzed. We are working to develop this tool to determine if the isotopic effect of lithium has an impact on battery aging. T2 - SALSA Konferenz CY - Berlin, Germany DA - 16.09.2021 KW - Atomic absorption spectrometry KW - Battery KW - Machine learning KW - Lithium KW - Isotope PY - 2021 AN - OPUS4-53693 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Monavari, Mehran A1 - Prellwitz, Matthias A1 - Muth, Thilo A1 - Eichstädt, Sascha A1 - Koch, Claudia T1 - Quality-X: A Federated Digital Ecosystem for the Future Quality Infrastructure N2 - Harmonized and interoperable national Quality Infrastructure (QI) systems are essential for fostering cooperation, promoting mutual trust, and facilitating trade. The true potential of the QI is realized when its elements and actors are seamlessly integrated into a cohesive digital QI ecosystem. Recent developments towards industrial international data spaces enable such an ecosystem but require the integration of QI principles. Recognizing the lack of such a platform, Quality-X aims at setting the stage for the implementation of a QI ecosystem in international data spaces (IDS), GAIA-X and related German and European projects dedicated to secure data sharing. Quality-X is not about the construction of a platform; it is the creation of an inclusive QI ecosystem with harmonized interfaces. Instead of imposing rigid data structures, it prioritizes interoperability. Through the utilization of Decentralized Identifiers (DIDs), Verifiable Credentials, and Identity Hubs, Quality-X seeks seamless interactions across diverse service provider systems. This white paper introduces the concept and vision of Quality-X and discusses the general prerequisites for integrating QI processes within data spaces. Further on, we introduce existing testbeds, which will serve as an experimental proving ground for exploring various use cases related to the implementation of the vision of a QI-Digital. +++ Harmonisierte und interoperable nationale Qualitätsinfrastrukturen (QI) sind für die Förderung der Zusammenarbeit, des gegenseitigen Vertrauens und der Erleichterung des Handels unerlässlich. Das wahre Potenzial der QI kommt zum Tragen, wenn ihre Elemente und Akteure nahtlos in ein kohärentes digitales QI-Ökosystem integriert werden. Die jüngsten Entwicklungen hin zu industriellen internationalen Datenräumen ermöglichen ein solches Ökosystem, erfordern jedoch die Integration von QI-Prinzipien. Angesichts des Fehlens einer solchen Plattform zielt Quality-X darauf ab, die Voraussetzungen für die Umsetzung eines QI-Ökosystems in internationalen Datenräumen (IDS), GAIA-X und verwandten deutschen und europäischen Projekten zum sicheren Datenaustausch zu schaffen. Bei Quality-X geht es nicht um den Aufbau einer Plattform, sondern um die Schaffung eines umfassenden QI-Ökosystems mit harmonisierten Schnittstellen. Anstatt starre Datenstrukturen aufzuerlegen, steht die Interoperabilität im Vordergrund. Durch die Verwendung von dezentralen Identifikatoren (DIDs), überprüfbaren Berechtigungsnachweisen und Identitäts-Hubs strebt Quality-X eine nahtlose Interaktion zwischen verschiedenen Systemen von Dienstleistern an. Dieses Whitepaper stellt das Konzept und die Vision von Quality-X vor und erörtert die allgemeinen Voraussetzungen für die Integration von QI-Prozessen in Datenräumen. Darüber hinaus stellen wir bestehende Testbeds vor, die als experimentelles Versuchsfeld für die Erforschung verschiedener Anwendungsfälle im Zusammenhang mit der Umsetzung der Vision einer QI-Digital dienen sollen. KW - Quality Assurance KW - Quality Infrastructure KW - Data Spaces KW - Digitalization KW - Quality Management KW - Interoperability KW - Verification KW - Identification KW - Certificate KW - Datenräume KW - Qualitätsinfrastruktur KW - Gaia-X KW - Manufacturing-X KW - Catena-X KW - Datenökosystem KW - Qualitätssicherung KW - Qualitätsmanagement PY - 2023 UR - https://www.qi-digital.de/fileadmin/user_upload/website/publikationen/1022_Brosch%C3%BCre_Quality-X_v4.pdf SP - 1 CY - Berlin AN - OPUS4-59354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Pohlisch, Jakob A1 - Blind, K. T1 - International Diffusion of the Information Security Management System Standard ISO/IEC 27001: Exploring the Role of Culture N2 - In the wake of digitalization, organizations are increasingly exposed to risks associated with security breaches and must take measures to preserve the confidentiality, integrity, and availability of information, and to ensure business continuity. The international standard ISO/IEC 27001 assists organizations in setting up, maintaining and continuously improving their information security management systems. However, despite high growth rates, its international diffusion rates are quite heterogeneous. This paper explores why the diffusion of the international management system standard ISO/IEC 27001 differs across countries. We classify the adoption of ISO/IEC 27001 as a ‘preventive organizational innovation’ and draw from diffusion studies of other management system standards and information security research to develop a set of hypotheses. These relate to the impact of cultural dimensions and national ICT development. We use a negative binomial regression model with panel data covering 57 countries over a 12-year period from 2006 to 2017 to test our hypotheses. We find that the cultural dimensions future orientation, power distance, and institutional collectivism as well as high ICT development are driving factors for the diffusion of ISO/IEC 27001. We derive policy recommendations and avenues for future research. T2 - Twenty-Eighth European Conference on Information Systems (ECIS2020) – A Virtual AIS Conference CY - Online meeting DA - 15.06.2020 KW - Information security KW - International diffusion KW - Standards KW - Management system standards KW - ISO/IEC 27001 KW - Preventive innovations KW - Culture KW - GLOBE KW - ICT development index PY - 2020 SP - RP 88 AN - OPUS4-50919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung genormter Managementsysteme N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen. Ende 2019 wurden in einer ersten Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung von Managementsystemen und ihren Wirkungen befragt. Diese umfasste weit verbreitete genormte Managementsysteme wie ISO 9001 und ISO 14001 genauso wie bisher wenig untersuchte Systeme wie die ISO 50001 oder ISO/IEC 27001. Es konnten 180 Fragebögen für die vorliegende Studie ausgewertet werden. KW - QI-FoKuS KW - Managementsysteme KW - ISO 9001 KW - ISO/IEC 27001 KW - ISO 50001 KW - ISO 14001 KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-510831 SN - 978-3-9818564-3-9 DO - https://doi.org/10.26272/opus4-51083 VL - 1 SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung der Norm ISO/IEC 27001 für Informationssicherheit in Unternehmen in Deutschland N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen und hierbei insbesondere auch auf aktuelle Trends und Entwicklungen einzugehen. Von Januar bis März 2020 wurden in einer Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung und den Wirkungen ihres zertifizierten Managementsystems für Informationssicherheit nach ISO/IEC 27001 befragt. Es konnten 125 vollständig ausgefüllte Fragebögen für die vorliegende Studie ausgewertet werden. KW - Managementsysteme KW - ISO/IEC 27001 KW - Informationssicherheit KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung KW - QI-FoKuS PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517922 DO - https://doi.org/10.26272/opus4-51792 VL - 2 SP - 1 EP - 28 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Quality assurance in supply chains during the COVID-19 pandemic: Empirical evidence on organisational resilience of conformity assessment bodies N2 - Global supply chains rely on the compliance and safety of their products, processes, and facilities. These vital services (often referred to as ‘quality assurance’ or ‘conformity assessment’ services) are provided by Conformity Assessment Bodies (CABs). This empirical study explores the impact of the COVID-19 pandemic on CABs as well as their response to the resulting challenges. Data was gathered through an online survey among all accredited CABs in Germany, which resulted in 555 valid responses. Taking a resilience perspective, we reveal that CABs were hit hard by the disruptions caused by the pandemic, albeit to different degrees, in part due to their type of services, size, and sectors served. Furthermore, we find that contingency plans do not directly cushion order declines (as the main indicator of the economic impact of the pandemic) but rather indirectly through helping CABs respond more quickly, which in turn mitigates their order declines. However, our results show that contingency plans can also have adverse effects if they hinder flexible reaction to the crisis. The findings of our study help managers and policymakers learn from the COVID-19 pandemic and improve the resilience of the conformity assessment sector and quality assurance in the event of future crises. KW - Quality Infrastructure KW - Digitalization KW - Testing laboratories KW - Organizational resilience KW - COVID-19 KW - Conformity assessment PY - 2022 DO - https://doi.org/10.1080/14783363.2022.2078189 SP - 1 EP - 23 PB - Taylor & Francis AN - OPUS4-55066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Koch, Claudia T1 - Nutzung und Wirkung von (zertifizierten) Managementsystemen – aktuelle Erkenntnisse N2 - Ergebnisvorstellung im mitgliederexklusiven Webinar der Deutschen Gesellschaft für Qualität - DGQ zur Nutzung und Wirkung von genormten Managementsystemen als die erste Erhebung im Rahmen von QI-FoKuS. Neben der Motivation hinsichtlich der Anwendung verschiedener Normen, die Anforderungen an Managementsysteme darlegen, sowie den Wirkungen werden insbesondere die Zertifizierung für diese Normen sowie daran anknüpfend die Rolle und Funktion der Akkreditierung – und somit verschiedene Bausteine der QI – adressiert. T2 - Mitgliederexklusives Webinar CY - Online meeting DA - 15.10.2020 KW - Management Systeme KW - QI-FoKuS KW - ISO 9001 KW - ISO/IEC 27001 KW - Zertifizierung KW - Kundenaudit KW - Konformitätsbewertung KW - Akkreditierung PY - 2020 AN - OPUS4-51431 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Koch, Claudia T1 - Informationssicherheit in deutschen Unternehmen: Ergebnisse der QI-FoKuS Umfrage zur ISO/IEC 27001 N2 - Ergebnisvorstellung im mitgliederexklusiven Webinar der Deutschen Gesellschaft für Qualität (DGQ) zur Studie: "Nutzung und Wirkung von einem ISMS nach ISO/IEC 27001". Neben Zweck und Design der Studie werden sowohl Hürden bei der Implementierung, fördernde Maßnahmen, die Anwender nützlich finden und die Frage, warum Firmen diese Norm nicht nutzen, erörtert. T2 - Nutzung und Wirkung von einem ISMS nach ISO/IEC 27001 CY - Online meeting DA - 15.04.2021 KW - Zertifizierung KW - Informationssicherheit KW - ISO/IEC 27001 KW - Managementsysteme PY - 2021 AN - OPUS4-52485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Kinne, J. A1 - Blind, K. T1 - Exploring the Adoption of the International Information Security Management System Standard ISO/IEC 27001: A Web Mining-Based Analysis N2 - In the light of digitalization and recent EU policy initiatives, information is an important asset that organizations of all sizes and from all sectors should secure. However, in order to provide common requirements for the implementation of an information security management system, the internationally well-accepted ISO/IEC 27001 standard has not shown the expected growth rate since its publication more than a decade ago.In this article, we apply web mining to explore the adoption of ISO/IEC 27001 through a series of 2664 out of more than 900 000 German firms from the Mannheim Enterprise Panel dataset that refers to this standard on their websites. As a result, we present a “landscape” of ISO/IEC 27001 in Germany, which shows that firms not only seek certifications themselves but often refer on their websites to partners who are certified instead. Consequently, we estimate a probit model and find that larger and more innovative firms are more likely to be certified to ISO/IEC 27001 and that almost half of all certified firms belong to the information and communications technology (ICT) service sector. Based on our findings, we derive implications for policymakers and management and critically assess the suitability of web mining to explore the adoption of management system standards. KW - Adoption KW - Information security KW - Management system standards KW - Standards KW - Web mining PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-513284 DO - https://doi.org/10.1109/TEM.2020.2977815 VL - 68 IS - 1 SP - 87 EP - 100 AN - OPUS4-51328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona A1 - Blind, K. A1 - Koch, Claudia A1 - Dudek, Gabriele T1 - Information security management in ICT and non-ICT sector companies: A preventive innovation perspective N2 - Despite the growing dependence of companies on information technology and the increasingly negative impact of security incidents worldwide, there is little research on the management of information security at the company level. This paper seeks to expand knowledge on the implementation of an information security management system based on the widely used international standard ISO/IEC 27001. We present motives, experienced impacts, and obstacles related to ISO/IEC 27001 implementation using data from a survey of 125 ISO/IEC 27001 certified companies in Germany. Since adoption rates vary between ICT and non-ICT sector companies, we highlight sector-related variations. We classify the adoption of this standard as a preventive organizational innovation and apply Structural Equation Modeling to unearth explanations for the comparatively low adoption of this management system standard among companies outside the ICT sector. We, therefore, derive recommendations for policymakers, standardization, and certification bodies to foster its diffusion. KW - Information Security KW - ISO/IEC 27001 KW - Management system standard KW - Certification KW - Information security management system (ISMS) KW - Preventive Innovation KW - Resource-based-view KW - Institutional theory PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531037 DO - https://doi.org/10.1016/j.cose.2021.102383 SN - 0167-4048 VL - 109 IS - 10 SP - 1 EP - 23 PB - Elsevier Ltd. AN - OPUS4-53103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Blind, K. ED - Jacobs, K. ED - Morone, P. T1 - Exploring the Diffusion of an ISMS Standard N2 - This paper introduces and discusses the applicability of Web Mining of Firm Websites to explore the Diffusion of Management System Standards using the example of an ISMS Standard. T2 - EURAS Conference CY - Rome, Italy DA - 13.06.2019 KW - Management System Standard KW - Information Security KW - Web Mining PY - 2019 SN - 978-3-95886-282-1 VL - 24 SP - 329 EP - 348 PB - Verlagshaus Mainz GmbH CY - Aachen, Germany AN - OPUS4-49031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mirtsch, Mona T1 - Adoption of the information security management system standard ISO/IEC 27001 - A study among German organizations N2 - Against the backdrop of numerous security breaches and cyber-attacks, organizations need to take measures to secure their data and information. However, the well-known management system standard ISO/IEC 27001 for information security has shown a lower adoption rate – in terms of annual ISO survey data – than was previously expected by scholars and practitioners. Through the lens of Rogers' diffusion of innovation theory, we consider the adoption of ISO/IEC 27001 as a 'preventive innovation' and aim to identify factors that help gain a better understanding of its adoption. Therefore, we conducted a survey among German organizations on the use and impact of management system standards, explicitly distinguishing between organizations that implement ISO/IEC 27001 and those that are additionally certified against this standard. This study provides insights and contributes to an advanced understanding of motives, impacts, barriers, and useful measures to increase adoption of ISO/IEC 27001. Our findings may be useful to organizations considering the adoption of this management system standard, to certification bodies providing certification services, and to policymakers seeking means to improve information security in organizations. KW - Management science and operations research KW - ISO/IEC 27001 KW - Management system standard KW - Information security KW - QI-FoKuS KW - Certification PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594704 UR - http://ijqr.net/paper.php?id=1098 DO - https://doi.org/10.24874/ijqr17.03-08 SN - 1800-6450 SN - 1800-7473 VL - 17 IS - 3 SP - 747 EP - 768 PB - Center for Quality, University of Montenegro CY - Podgorica AN - OPUS4-59470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona ED - Jakobs, K. ED - O'Connor, R.V. T1 - The Role of Conformity Assessment in the Digital Transformation: Focusing on Cybersecurity N2 - Digital transformation and especially the dramatic rise of products and services connected to the Internet of Things raise the questions on how to deal with the increasing risks related to Privacy and Cybersecurity. Presumably, these risks seem to be insufficiently reflected in the European Union’s current regulative system – by being neither part of the traditional definition of a safe product nor part of product-specific vertical or horizontal directives. Certification based on standards as underlying requirements has been identified by policymakers as an instrument to address this issue. The latest European draft regulation aims at increasing security and trust in ICT products and services, and reducing current European market fragmentation with a new Cybersecurity Certification Framework. Based on the results of a qualitative analysis of stakeholder statements on the current proposal on the Cybersecurity Act, this paper discusses elements of the proposed Cybersecurity Certification Framework. As a theoretical background, this paper provides definitions of the terms Safety, IT-security, and Cybersecurity, presents selected Cybersecurity-related standards and provides an outlook on future challenges to Conformity Assessment in the digital transformation. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Conformity Assessment KW - Cybersecurity KW - Certification KW - IT-Security PY - 2018 SN - 978-3-95886-229-6 VL - 2018 SP - 183 EP - 202 PB - Verlagshaus Mainz GmbH Aachen CY - Aachen AN - OPUS4-45686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona T1 - The Role of Conformity Assessment in the Digital Transformation: Focusing on Cybersecurity N2 - Digital transformation and especially the dramatic rise of products and services connected to the Internet of Things raise the questions on how to deal with the increasing risks related to Privacy and Cybersecurity. Presumably, these risks seem to be insufficiently reflected in the European Union’s current regulative system – by being neither part of the traditional definition of a safe product nor part of product-specific vertical or horizontal directives. Certification based on standards as underlying requirements has been identified by policymakers as an instrument to address this issue. The latest European draft regulation aims at increasing security and trust in ICT products and services, and reducing current European market fragmentation with a new Cybersecurity Certification Framework. Based on the results of a qualitative analysis of stakeholder statements on the current proposal on the Cybersecurity Act, this paper discusses elements of the proposed Cybersecurity Certification Framework. As a theoretical background, this paper provides definitions of the terms Safety, IT-security, and Cybersecurity, presents selected Cybersecurity-related standards and provides an outlook on future challenges to Conformity Assessment in the digital transformation. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Cybersecurity KW - Certification KW - Conformity Assessment KW - IT-Security PY - 2018 AN - OPUS4-45687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona T1 - Cybersicherheit als eine Voraussetzung für sichere Produkte, Dienstleistungen und Prozesse: Der neue europäische Rechtsakt zur Cybersicherheit N2 - Bedeutung von Cybersicherheit für die Konformitätsbewertung Vorstellung Rechtsakt zur Cybersicherheit [COM(2017)477] vom 13.9.2017 bzw. letzter Entwurf vom 12.3.2019 Ergebnisse einer Analyse der Reaktionen von interessierten Kreisen Kurzvorstellung ausgewählter Normen im Bereich Cybersicherheit T2 - EUROLAB-D Kolloquium CY - BAM, Berlin, Germany DA - 09.04.2019 KW - Cybersicherheit KW - Zertifizierung KW - Cybersecurity Act KW - Cybersecurity PY - 2019 AN - OPUS4-47771 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Pohlisch, Jakob A1 - Blind, K. T1 - International Diffusion of the Information Security Management System Standard ISO/IEC 27001: Exploring the role of culture N2 - In the wake of digitalization, organizations are increasingly exposed to risks associated with security breaches and must take measures to preserve the confidentiality, integrity, and availability of information, and to ensure business continuity. The international standard ISO/IEC 27001 assists organizations in setting up, maintaining and continuously improving their information security management systems. However, despite high growth rates, its international diffusion rates are quite heterogeneous. This paper explores why the diffusion of the international management system standard ISO/IEC 27001 differs across countries. We classify the adoption of ISO/IEC 27001 as a ‘preventive organizational innovation’ and draw from diffusion studies of other management system standards and information security research to develop a set of hypotheses. These relate to the impact of cultural dimensions and national ICT development. We use a negative binomial regression model with panel data covering 57 countries over a 12-year period from 2006 to 2017 to test our hypotheses. We find that the cultural dimensions future orientation, power distance, and institutional collectivism as well as high ICT development are driving factors for the diffusion of ISO/IEC 27001. We derive policy recommendations and avenues for future research. T2 - Twenty-Eighth European Conference on Information Systems (ECIS2020) – A Virtual AIS Conference CY - Online meeting DA - 15.06.2020 KW - Information security KW - International diffusion KW - Standards KW - Management system standards KW - ISO/IEC 27001 KW - Preventive innovations KW - Culture KW - GLOBE KW - ICT development index PY - 2020 AN - OPUS4-50921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Blind, K. T1 - Introducing web mining of firm websites to explore innovation indicators using the example of management system standards N2 - Traditional innovation indicators often lack coverage, granularity as well as timeliness and involve high data collection costs, especially when conducted at a large scale. Based on the assumption that firms publish information about their products and services on their own websites, the Centre for European Economic Research in Mannheim (ZEW) has developed a framework to extract information from German firm websites applying Web Mining using a free-to-use web-scraping tool. Categorized as an intraorganizational procedural innovation, management system standards often lack research especially during the early stages of their diffusion mainly due to low data availability. Therefore, we introduce Web Mining to study the diffusion of the international management system standard ISO/IEC 27001 in Germany. Using the Mannheim Enterprise panel dataset, we first apply Web Mining to identify firms that refer to these and other common management system standards, followed by manual categorization. Second, we estimate a probit model to identify drivers for its implementation. Finally, we derive recommendations for policy makers. T2 - Collaborative research seminar series autumn 2019 CY - Linköping, Schweden DA - 26.11.2019 KW - Management System Standard KW - ISO/IEC 27001 KW - Information security KW - Web Mining PY - 2019 AN - OPUS4-49821 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Dudek, Gabriele T1 - Vorstellung BAM Initiative: QI-FoKuS N2 - Mit QI-FoKuS / Forschung für Konformitätsbewertung und Sicherheit streben wir auf Basis einer wiederkehrenden Befragung von Unternehmen und Konformitätsbewertungsstellen in Deutschland die Schaffung einer besseren Datengrundlage für die Forschung an. Diese soll es erleichtern, wichtige Zusammenhänge evidenzbasiert zu analysieren, um das systemische Zusammenwirken der Elemente der Qualitätsinfrastruktur besser zu verstehen. Dabei sollen zunächst die Elemente Konformitätsbewertung und Akkreditierung besonders im Vordergrund stehen. T2 - Erfahrungsaustausch des VAZ e.V. CY - Berlin, Germany DA - 07.05.2019 KW - Managementsysteme KW - Unternehmensbefragung KW - QI-FoKuS KW - Konformitätsbewertung KW - Zertifizierung PY - 2019 AN - OPUS4-47971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Mirtsch, Mona ED - Mangelsdorf, Axel ED - Weiler, Petra T1 - Konformitätsbewertung im Bereich Cybersicherheit N2 - Das Ziel dieses Kapitels besteht darin, die Rolle von Konformitätsbewertung für die Erhöhung der Cybersicherheit von Produkten, Dienstleistungen und Prozessen zu betrachten. Dazu wird der Begriff Cybersicherheit beleuchtet sowie ausgewählte Cybersicherheitsnormen kurz vorgestellt. Im Folgenden wird der regulative europäische Rahmen für die Konformitätsbewertung aus ordnungspolitischer Sicht sowie der aktuelle Verordnungsentwurf zum Cybersecurity Act dargestellt und kritsch beleuchtet. KW - Cybersicherheit KW - Konformitätsbewertung KW - Cybersecurity Act KW - Normen PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-473829 UR - https://www.degruyter.com/downloadpdf/books/9783110629057/9783110629057-009/9783110629057-009.pdf SN - 978-3-11062-905-7 DO - https://doi.org/10.1515/9783110629057 SP - 141 EP - 164 PB - De Gruyter CY - Berlin, Boston ET - 1 AN - OPUS4-47382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Koch, Claudia T1 - Vorstellung BAM-Initiative QI-FoKuS N2 - Vorstellung der BAM und der Initiative QI-FoKuS bei dem VDA mit einem Schwerpunkt auf die am 30.09.2019 startende Unternehmensbefragung zu Nutzung und Wirkung von Managementsystemen T2 - VDA: Sitzung III / 2019 des Ausschusses Qualitätsmanagement (QMA) CY - Berlin, Germany DA - 25.09.2019 KW - Konformitätsbewertung KW - Managementsysteme KW - ISO/IEC 27001 PY - 2019 AN - OPUS4-49116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona T1 - Web Mining zur Erforschung von Nutzung von Standards und Zertifikaten N2 - Anhand eines Anwendungsbeispiels im Bereich Informationssicherheit wird das Web Mining von Unternehmenswebseiten vorgestellt und diskutiert. T2 - Abteilungsseminar CY - BAM, Berlin DA - 28.01.2019 KW - Management Systeme KW - Web Mining KW - Informationssicherheit PY - 2019 AN - OPUS4-49028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Blind, K. T1 - Exploring the Diffusion of the ISMS Standard ISO/IEC 27001 N2 - We presented and discussed the applicability of Web Mining to explore the Diffusion of Management System Standards, in particular in regards to Information Security T2 - EURAS Conference CY - Rome, Italy DA - 14.06.2019 KW - Diffusion KW - Management system standard KW - Information security KW - Web Mining PY - 2019 AN - OPUS4-49029 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele T1 - Presentation at AVIC-Workshop: BAM initiative QI-FoKuS N2 - QI-FoKuS stands for „Quality Infrastructure – Research for Conformity Assessment and Safety“. Supported by the BMWi, a new recurring survey of companies was launched under this name in end-September 2019 in a joint project between the TU Berlin and the Federal Institute for Materials Research and Testing (BAM). The first company survey deals with the use and certification of management systems with a special focus on information security and the criteria for the selection of certification bodies. T2 - Visit & Workshop of NQI Lab SAMR/AVIC and BAM CY - Berlin, Germany DA - 29.10.2019 KW - Conformity Assessment KW - Information Security KW - Accreditation KW - Certification KW - QI-FoKuS PY - 2019 AN - OPUS4-49477 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona A1 - Blind, K. T1 - Presentation at AVIC-Workshop: Exploring the diffusion of the information security management system standard ISO/IEC 27001 N2 - We explore the adoption and diffusion of the international information security management system standard ISO/IEC 27001 with Web Mining of German firm websites using the Mannheim Enterprise Panel dataset (MUP). T2 - Visit & Workshop of NQI Lab SAMR/AVIC and TU-Berlin CY - Berlin, Germany DA - 31.10.2019 KW - ISO/IEC 27001 KW - Web Mining KW - Information security PY - 2019 AN - OPUS4-49478 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Matschat, Ralf A1 - Richter, Silke A1 - Vogl, Jochen A1 - Kipphardt, Heinrich T1 - On the way to SI traceable primary transfer standards for amount of substance measurements in inorganic chemical analysis N2 - During its 25 years of existence, the Inorganic Analysis Working Group of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM IAWG) has achieved much in establishing comparability of measurement results. Impressive work has been done on comparison exercises related to real-world problems in fields such as ecology, food, or health. In more recent attempts, measurements and comparisons were focused on calibration solutions which are the basis of most inorganic chemical measurements. This contribution deals with the question of how to achieve full and transparent SI traceability for the values carried by such solutions. Within this framework, the use of classical primary methods (CPMs) is compared to the use of a primary difference method (PDM). PDM is a method with a dual character, namely a metrological method with a primary character, based on the bundling of many measurement methods for individual impurities, which lead to materials with certified content of the main component. As in classical methods, where small corrections for interferences are accepted, in PDM, many small corrections are bundled. In contrast to classical methods, the PDM is universally applicable to all elements in principle. Both approaches can be used to certify the purity (expressed as mass fraction of the main element) of a high-purity material. This is where the metrological need of National Metrology Institutes (NMIs) for analytical methods meet the challenges of analytical methods. In terms of methods, glow discharge mass spectrometry (GMDS) with sufficient uncertainties for sufficiently small impurity contents is particularly noteworthy for the certification of primary transfer standards (PTS), and isotope dilution mass spectrometry (IDMS), which particularly benefits from PTS (back-spikes) with small uncertainties, is particularly noteworthy for the application. The corresponding relative uncertainty which can be achieved using the PDM is very low (< 10−4). Acting as PTS, they represent the link between the material aspect of the primary calibration solutions and the immaterial world of the International System of Units (SI). The underlying concepts are discussed, the current status of implementation is summarised, and a roadmap of the necessary future activities in inorganic analytical chemistry is sketched. It has to be noted that smaller measurement uncertainties of the purity of high-purity materials not only have a positive effect on chemical measurements, but also trigger new developments and findings in other disciplines such as thermometry or materials science. KW - Inorganic chemical analysis KW - Primary transfer standards (PTSs) KW - Traceability KW - Classical primary measurement method (CPM) KW - Primary difference measurement method (PDM) KW - Metrology in chemistry PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-572743 DO - https://doi.org/10.1007/s00216-023-04660-4 SN - 1618-2642 SN - 1618-2650 VL - 415 SP - 3057 EP - 3071 PB - Springer CY - Berlin AN - OPUS4-57274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Technology adoption and digital maturity in the conformity assessment industry: Empirical evidence from an international study N2 - Technological innovation and digitalization are transforming industries and organizations worldwide. Digital Maturity Models often serve as a reference point to monitor the digitalization progression through prescribed stages. Yet, little is still understood about (i) how a digital maturity model should be designed and deployed in a specific industry setting and (ii) the association between digital maturity and technology adoption. Building on extant literature and extensive interviews with industry experts, we first develop a digital maturity model in the context of the conformity assessment industry (a globally regulated industry responsible for assessing compliance of organizations with standards and regulations). Second, we implement the model and conduct a survey across 1447 organizations in 15 countries. Our findings reveal that the digital transformation journey of the industry progresses along five stages of maturity (with most organizations in the early/ intermediate stages of digital maturity) with distinctive patterns of technical and managerial practices across all stages. Adoption of technologies is (unsurprisingly) associated with higher digital maturity levels - albeit that association does not hold for complex technologies (such as Blockchain) and is impacted by country specifics (measured by the Digital Skills Gap Index). Our study provides insights into digital maturity and the adoption of technologies in an institutional environment that is highly regulated and conservative, in which high integrity of service provision is primary, and digitalization is a secondary focus of organizations. KW - Digital Maturity KW - Standardisation KW - Digital Maturity Scores KW - Technology Adoption KW - Digital Technologies PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601930 DO - https://doi.org/10.1016/j.techsoc.2024.102564 VL - 77 SP - 1 EP - 12 PB - Elsevier Ltd. AN - OPUS4-60193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Colombia - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Colombia. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Colombian CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-558484 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in the Netherlands - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in the Netherlands. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. The study on Dutch CABs is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-555852 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ladu, Luana A1 - Koch, Claudia A1 - Asna Ashari, Parsa A1 - Blind, K. A1 - Castka, P. T1 - Digitalization in conformity assessment in Peru - A QI-FoKuS study N2 - This report summarizes findings from the first comprehensive study on digitalization in conformity assessment in Peru. The reults are based on data from a survey among conformity assessment bodies (CABs) conducted in 2022. It highlights the digital maturity of the organizations, the motives, benefits and obstacles of digital transformation as well as the actual technology trends. This study is part of a global project that covers various other countries (see www.qi-fokus.de). KW - COVID-19 KW - Calibration KW - Certification KW - Conformity assessment KW - Conformity assessment body KW - Digital transformation KW - Digitalization KW - Laboratory KW - Quality infrastructure KW - TIC KW - Testing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-563417 UR - https://www.qi-fokus.de SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -