TY - JOUR A1 - Asna Ashari, Parsa A1 - Blind, Knut T1 - The effects of hydrogen research and innovation on international hydrogen trade N2 - Climate change and the pressure to decarbonize, as well as energy security concerns, have drawn the attention of policymakers and the industry to hydrogen energy. To ad-vance the hydrogen economy at a global scale, research and innovation progress is of significant importance, among others. However, previous studies have provided only lim-ited quantitative evidence of the effects of research and innovation on the formation of a global hydrogen market. Instead, they postulate rather than empirically support this rela-tionship. Therefore, this study analyzes the effects of research and innovation measured by scientific publications, patents, and standards on bilateral hydrogen trade flows for 32 countries between 1995 and 2019 in a gravity model of trade, using regression analyses and Poisson Pseudo Maximum Likelihood (PPML) estimation. The main results of the PPML estimation show that research and innovation progress is indeed associated with increased trade, especially with patenting and (international) standardization enhancing hydrogen export volumes. As policy implications, we derive that increased public R&D funding can help increase the competitiveness of hydrogen energy and boost market growth, along with infrastructure support and harmonized standards and regulations. KW - Hydrogen supply KW - Global hydrogen market KW - Research and innovation KW - Push and pull effects KW - Hydrogen policies PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594875 DO - https://doi.org/10.1016/j.enpol.2023.113974 SN - 0301-4215 VL - 186 SP - 1 EP - 15 PB - Elsevier B.V. AN - OPUS4-59487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schischke, Karsten A1 - Rückschloss, Jana A1 - Schlegel, Moritz-C. A1 - Zöllinger, Jonathan A1 - Nissen, Nils F. A1 - Schneider-Ramelow, Martin T1 - The European Union’s Energy Label for Smartphones: Does it guide consumers to make environmentally sustainable choices? N2 - The European Commission adopted an EU Energy Label for smartphones and tablets in June 2023. For the first time, the EU Energy Label will depict, among energy efficiency, also a reparability score, battery endurance, battery lifetime, drop resistance and dust and water ingress protection. However, does the multitude of parameters bear the risk to confuse consumers instead of triggering environmentally sustainable purchase decisions? In a survey in Germany, consumers were asked to make a choice when the label does not clearly identify the environmentally better product. Instead, energy efficiency has to be valued against reparability, reliability against energy efficiency, and reparability against reliability. The sustainability lever of the different aspects is not the same, as e.g. lifetime extension has a much more positive environmental impact than energy efficiency in case of mobile devices. Therefore, the question remains, whether consumers intuitively make the right choice. Results of the survey indicate that consumers interpret the complex label in the desired manner and value those aspects higher, which indeed have a more positive effect on the environment. T2 - 13th International Conference on Consumer Electronics CY - Berlin, Germany DA - 03.09.2023 KW - Energy efficiency KW - EU Energy Labelling KW - Reparability KW - Reliability KW - ESPR PY - 2023 UR - https://ieeexplore.ieee.org/document/10375619 DO - https://doi.org/10.1109/ICCE-Berlin58801.2023.10375619 SP - 1 EP - 6 PB - IEEE AN - OPUS4-59318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Asna Ashari, Parsa T1 - Exploring the Technological Innovation System for Hydrogen Technologies - Four Essays on the Roles of Research, Innovation, and Safety N2 - Presentation of the doctoral thesis held at the PhD Colloquium of the Chair of Innovation Management, Freie Universität Berlin. Hydrogen has recently come into political and industrial focus due to its potential to advance the transition to a net-zero economy. Despite this recognized potential, the market ramp-up of hydrogen technologies has not yet been realized at large. Therefore, this thesis attempts to investigate how advances in hydrogen research, innovation, and safety link up to market formation using the Technological Innovation Systems (TIS) and Quality Infrastructure (QI) frameworks. Thereupon, the thesis formulates several recommendations for transitioning to a hydrogen economy. T2 - PhD Colloquium of the Chair of Innovation Management (Freie Universität Berlin) CY - Berlin, Germany DA - 09.01.2024 KW - Hydrogen KW - Research and innovation KW - Innovation system KW - Safety PY - 2024 AN - OPUS4-59400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gottinger, A. A1 - Ladu, Luana A1 - Blind, K. T1 - Standardization in the context of science and regulation: An analysis of the Bioeconomy N2 - Standards play a crucial role in the transition to more sustainable production and consumption models by promoting the development of new markets for innovative products. In the case of the bioeconomy, standards are particularly relevant to ensure the sustainability of products and processes. Hence, standards represent an essential strategic tool to foster sustainable development. Furthermore, the standard-setting process brings together different stakeholders, which encourages research and the transfer of knowledge to industrial practice. In particular, scientific publications assist the standardisation process by providing scientific evidence. This study investigates the role of science and regulation in the bioeconomy standardisation process. It first provides a general analysis of bioeconomy-related standards, followed by an analysis of the regulations and publications referenced in the standards. Our analysis discloses a strong use of scientific knowledge in the bioeconomy standardisation process and demonstrates the readiness to integrate novel academic findings into revised versions of the standards. In addition, it reveals that the interaction between science and regulation is an important driver for standardisation activities around the bioeconomy, needed to support sustainable transitions. KW - Bioeconomy KW - Standardisation KW - Knowledge Use KW - Socio-technical Transition PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599899 DO - https://doi.org/10.1016/j.envsci.2023.06.013 VL - 147 SP - 188 EP - 200 PB - Elsevier AN - OPUS4-59989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Imbert, E. A1 - Ladu, Luana T1 - Editorial - Metrics for sustainable chemistry N2 - This special issue addresses the current need to enhance the conceptual and empirical implementation of sustainability assessment methodologies and related metrics within the GSC (Green and Sustainable Chemistry), collecting 7 papers. KW - Green and sustainable chemistry (GSC) KW - Special issue KW - Sustainability assessment methodologies PY - 2023 DO - https://doi.org/10.1016/j.cogsc.2023.100844 SN - 2452-2236 VL - 43 SP - 1 EP - 3 PB - Elsevier CY - Amsterdam AN - OPUS4-59990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - OITB Quality Assurance concept and minimum requirements for testing services offered on the Metabuilding platform N2 - A brief description of the Quality Assurance concept of the Metabuilding Labs Open Ivvovation Test Bed (OITB) and presentation of the minimum requirements for testing services offered on the Metabuilding platform, wehich were elaborated in 2 workshops in summer 2023. T2 - 4th General Meeting of the Metabuilding Labs project (Horizon 2020) CY - Valladolid, Spain DA - 10.10.2023 KW - Open Innovation Test Bed KW - Metabuilding Labs PY - 2023 AN - OPUS4-58566 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - O3BET Quality Protocols N2 - Presentation of the process-oriented approach for the development of the quality protocolls (standard operation procedures and work instructions) for the O3BETs. O3BETs are innovative testing facilities for building envelopes which are developed in the course of the Metabuilding Labs EU Horizon 2020 project. T2 - 4th General Meeting of the Metabuilding Labs project (Horizon 2020) CY - Valladolid, Spain DA - 10.10.2023 KW - Open Innovation Test Bed KW - Metabuilding Labs KW - O3BET PY - 2023 AN - OPUS4-58567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blind, Knut T1 - Transitions in the mobility sector: Empirical evidence from hydrogen fuel cell, electric, and internal combustion engine vehicles N2 - This presentation was held at the 14th International Sustainability Transitions Conference 2023 in Utrecht. Against the backdrop of the sustainability transition of economies worldwide, decarbonizing road traffic is high on the agenda. This has focused the interest of policymakers and automobile manufacturers on sustainable, zero-emission powertrain technologies. Among these technologies, hydrogen fuel cell (FC) vehicles have a positive climate impact, given that their hydrogen is produced from renewable energy. However, FC vehicles have not yet gained significant market shares. Therefore, based on the technological innovation systems (TIS) approach, this study analyzes how FC vehicles are influenced by EVs and internal combustion engine (ICE) vehicles as their context structures. To operationalize the technology relations between our focal FC-TIS and its context structures, we use the sum of international publications, patents filed at the European Patent Office, and international ISO and IEC standards as indicators for each technology. Our results show that the FC-TIS is dominated by its context structures, especially regarding commercially relevant patents and international standards. Therefore, we conclude that the FC-TIS is in its formative life-cycle phase and identify the need for intensified patenting and standardization in relation to the competing EVs and ICE vehicles. T2 - 14th International Sustainability Transitions Conference 2023 CY - Utrecht, Netherlands DA - 30.08.2023 KW - Fuel cell vehicles KW - Publications KW - Patents KW - Standards KW - Technological innovation system (TIS) KW - Technology interaction PY - 2023 AN - OPUS4-59332 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsroadmap Circular Economy - Inhalte und Ansätze zur Umsetzung N2 - Der Vortrag umfasst eine Einsortierung der Circular Economy in der Normung, skizziert die Inhalte der DIN/DKE/VDI-Normungsroadmap Circular Economy bezüglich Digitalisierung, Elektrotechnik und IKT sowie Batterien und zeigt Schnittstellen zur Politik. Zum Schluss zeigt der Vortrag erste Ansätze zur Umsetzung der in der Normungsroadmap beschriebenen Normungsbedarfe. T2 - EXFO 2023 Global Environmental Compliance - Ecodesign & Nachhaltigkeit CY - Online meeting DA - 23.03.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normung KW - Ressourceneffizienz KW - Materialeffizienz PY - 2023 AN - OPUS4-57205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normative Kernbedarfe einer Circular Economy N2 - Vorstellung von Schlüsselgremien und Aktivitäten bzgl. der Schaffung einer normativen und untergesetzlichen Basis zur Etablierung einer Circular Economy. T2 - Fraunhofer IZM AK Rechtskonformes Umweltmanagement CY - Berlin, Germany DA - 28.02.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Produkteffizienz KW - Materialeffizienz KW - Europäische Kommission PY - 2023 AN - OPUS4-57054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rüdenauer, I. A1 - Quack, D. A1 - Schlegel, Moritz-Caspar T1 - kWh versus Euro – What is the most effective way to inform about efficient products? N2 - Energy efficient products often have a higher purchase price than less efficient alternatives. However, the life cycle costs are often lower due to the lower operating costs. From a purely economic point of view, efficient appliances are not only more ecological but often also more economical and, accordingly, should be purchased more frequently than less efficient appliances. However, this is not always the case. Information deficits are one of the major reasons of this discrepancy: the purchase price is visible during the purchasing process, but the follow-up costs are not, at least not in their exact amount. The EU Energy Label can be considered as a solution to close this gap. During the past decades, there has been a discussion on whether it would be better to communicate the monetary costs associated with energy consumption, since their calculation by the consumer is difficult or needs a high level of cognitive effort. In this study, experiments and field studies on a total of 19 product groups were evaluated with regard to the question of whether the indication of costs instead of physical units affects the decision-making process of the consumer. It has been assessed under which circumstances it might positively influence the purchase decision of the customer, i.e. helping him or her to arrive at a more “energy efficient” decision. Overall, the results indicate that monetary claims possibly exceed the effect of claims on a physical basis when the costs or the differences between the alternatives available seem “relevant” to the consumer. T2 - EEDAL’21 CY - Toulouse, France DA - 01.06.2021 KW - Energy Labelling KW - Ecodesign PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570454 SN - 978-92-76-99908-9 DO - https://doi.org/10.2760/356891 SP - 358 EP - 367 AN - OPUS4-57045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Status of task 8.5 - quality assurance N2 - The presentation was given at the virtual general meeting of the Horizon 2020 project "Metabuilding Labs" to inform the partners about the status of the development of the quality management documentation of MBLabs. T2 - Metabuilding Labs General Meeting March 8th & 9th CY - Online meeting DA - 8.3.2023 KW - Quality Management KW - Metabuilding Labs PY - 2023 AN - OPUS4-57122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunderkötter, Jan T1 - Eurachem - a network and expert forum for young scientists N2 - Eurachem is an international network of national organisations having the objective of establishing a system for the international traceability of chemical measurements and the promotion of good quality practices. It also provides a forum for discussing common problems and exchanging information on quality assurance issues in analytical chemistry. The presentation will explain how Eurachem is organised, the requirements for participation and the opportunities for collaboration and networking. In particular, it will discuss why Eurachem offers an interesting network for young scientists to exchange experiences and further their own education. T2 - Doktorandenseminar der GDCh CY - Mannheim, Germany DA - 31.07.2024 KW - Eurachem KW - Network PY - 2024 AN - OPUS4-60923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Alić, Jasna A1 - Schlegel, Moritz-Caspar A1 - Emmerling, Franziska A1 - Stolar, Tomislav T1 - Meeting the UN Sustainable Development Goals with Mechanochemistry N2 - Chemistry traditionally relies on reactions in solution, but this method is increasingly problematic due to the scale of chemical processes and their economic and environmental impact. Handling residual chemical waste, including solvents, incurs significant costs and environmental pressure. Conversely, novel chemical approaches are needed to address pressing societal issues such as climate change, energy scarcity, food insecurity, and waste pollution. Mechanochemistry, a sustainable chemistry discipline that uses mechanical action to induce chemical reactivity without bulk solvents, is a hot topic in academic research on sustainable and green chemistry. Given its fundamentally different working principles from solution chemistry, mechanochemistry offers more efficient chemical processes and the opportunity to design new chemical reactions. Mechanochemistry has a profound impact on many urgent issues facing our society and it is now necessary to use mechanochemistry to address them. This Minireview aims to provide a guide for using mechanochemistry to meet the United Nations (UN) Sustainable Development Goals (SDGs), thereby contributing to a prosperous society. Detailed analysis shows that mechanochemistry connects with most UN SDGs and offers more cost‐efficiency than other approaches together with a superior environmental performance. KW - Mechanochemistry KW - SDGs PY - 2024 DO - https://doi.org/10.1002/anie.202414745 SP - 1 EP - 3 PB - Wiley AN - OPUS4-61108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlegel, Moritz-Caspar A1 - Rockland, Ulrike A1 - Harrer, Andrea T1 - Informationsmaterial zu Wartung und Betrieb von Getränkekühlern N2 - „Getränkekühler optimal einsetzen“: So sparen Sie die Energiekosten und schonen das Klima. Wussten Sie, dass Sie durch den Einsatz eines effizienten Getränkekühlers (Energieeffizienzklasse B) ca. 114 € pro Jahr sparen im Vergleich zu einem weniger effizienten Gerät (Energieeffizienzklasse D)? Aber nicht immer gibt es die Möglichkeit ein Neugerät anzuschaffen. Oft werden die Kühlgeräte von Getränkeherstellern zur Präsentation ihrer Waren zur Verfügung gestellt. Trotzdem tragen am Ende die Betreiber:innen die Betriebskosten der Geräte. Aber auch beim Einsatz Ihres weniger effizienten Getränkekühler gibt es verschiedene Möglichkeiten, die Energiekosten zu senken. Beispielsweise kann schon der Einsatz einer Zeitschaltuhr zu einer Stromreduzierung von bis zu 50 Prozent oder auch die richtige Platzierung der Geräte an kühlen Orten ohne Zugluft zu einem geringeren Strombedarf von bis zu 30% führen. In unserer Checkliste für die Aufstellung und das Betreiben von Getränkekühlgeräten zeigen wir Ihnen einfache Schritte, um den Energieverbrauch schnell zu senken. KW - Getränkekühler PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-561581 SP - 1 EP - 2 CY - Berlin AN - OPUS4-56158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Circular Economy - Materialeffizienznormen und -leitfäden N2 - Deutschland befindet sich inmitten eines umfassenden Transformationsprozesses hin zu einer klimaneutralen und nachhaltigen Wirtschaft und Gesellschaft. Sowohl das Erreichen der Klimaziele als auch die Anpassung an die Folgen des Klimawandels fordern ein rasches, bestimmtes und gleichzeitiges Handeln in vielen Sektoren und Lebensbereichen. Normen und Standards können einen wichtigen Beitrag zum Erreichen dieser Ziele leisten. So haben Normungsorganisationen weltweit mit der ISO London Declarationeinen Pakt zur Unterstützung des Klimas geschlossen. Das bestehende Normenwerk muss auf Klimawandel-Tauglichkeit überprüft und eine Überarbeitung angestoßen werden. Der Klimawandel als Querschnittsthema betrifft alle Wirtschaftszweige, und daher bieten DIN, DKE und VDI mit dieser durch Impulsvorträge eingeleiteten Diskussionsreihe eine Plattform zum Austausch über Normung als Werkzeug zum Thema Klima mit allen Akteuren. T2 - DIN/DKE/VDI-Frühstücksreihe: Klima und Normung CY - Berlin, Germany DA - 08.11.2022 KW - Circular Economy KW - Ökodesign KW - Materialeffizienz KW - Ressourceneffizienz KW - Energieeffizienz KW - Produktdesign PY - 2022 AN - OPUS4-56183 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurster, S. A1 - Ladu, Luana T1 - Triple-C: A Tridimensional Sustainability-Oriented Indicator for Assessing Product Circularity in Public Procurement N2 - Various microlevel circular economy indicators for assessing sustainability and, partly, additional sustainability characteristics have been developed, but an integrated solution considering the environmental, social, and economic pillars remains a research gap. Method: Based on a multimethod approach, including surveys and the analysis of existing sustainability assessment methodologies and standards, this paper proposes a concept for a multidimensional circular economy indicator tailored to public procurers. It relies on attractive existing building blocks including: the ecological scarcity method, European and international sustainability standards and indicators,and the STAR-ProBio-IAT concept. Results: This article presents the concept of the composite indicator Triple-C, consisting of 20 elements and aimed at facilitating sustainable circular public procurement. It is intended to be incorporated into software that facilitates sustainable product decisions among public procurers in Germany. Conclusions: We propose a generic indicator concept covering all three (environmental, social, and economic) sustainability pillars. More research and additional standards are needed to develop the Triple-C concept further into product-specific applications. KW - Circular economy KW - Sustainability assessment KW - Circularity KW - Ecological scarcity method KW - Life-cycle assessment KW - LCA KW - Life-cycle costing KW - LCC KW - Social sustainability KW - Indicators PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-564115 DO - https://doi.org/10.3390/su142113936 VL - 14 IS - 21 SP - 1 EP - 23 PB - MDPI CY - Berlin AN - OPUS4-56411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-C. T1 - Considerations for an overall Material Efficiency Index N2 - The material efficiency of products is increasingly addressed in the consumer communication of manufacturers (associations) and as well by policy makers. For instance, EU policies, such as the European Green Deal or the Circular Economy Action Plan, include and indicate sustainability measures related to material efficiency. The strategies and measures address product efficiency far beyond energy efficiency, which has been prioritized and effectively improved due to past policy measures. Now the material efficiency of products is to be increased by considering aspects such as durability, reparability and recyclability. The European Commission has already started to address these material efficiency topics in regulations within the Ecodesign regulatory framework. There is also discussion where and how sustainable product characteristics can be labelled for the information of consumers. A regulation has been passed that requires an energy label including a repairability index for smartphones starting in 2025. Further product groups and product properties such as recyclability and use of post-consumer recycled material might follow. So, the question arises: Should information be combined to reduce the complexity for consumers? Is there potential to develop a consumer labelling including additional sustainability aspects of products such as reuse, refurbishing, remanufacturability? This study analyses opportunities to better flag recyclability, recycled content, durability and reparability. Since the indices are intended to direct consumption toward the most material- and resource-efficient products, the study also presents an approach how these indices could be merged into an overall material efficiency index - possibly a starting point for minimum material efficiency requirements or a labelling opportunity under upcoming Ecodesign-related regulations. T2 - EEDAL'24 - 12th International Conference on Energy Efficiency in Domestic Appliances and Lighting CY - Kitakyushu, Japan DA - 07.10.2024 KW - Material efficiency KW - Recyclability KW - Durability KW - Reparability KW - Ecodesign KW - ESPR PY - 2024 AN - OPUS4-61653 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bianchi, M. A1 - Cascavilla, A. A1 - Clavell Diaz, J. A1 - Ladu, Luana A1 - Palacino Blazquez, Barbara A1 - Menger, Pierre A1 - Staffieri, Eleonora A1 - Yilan, Gülsah Yilan T1 - Circular bioeconomy: A review of empirical practices across implementation scales N2 - The European Commission has endorsed the transition to a circular bioeconomy as a crucial initiative to achieve a sustainable and climate-neutral European Union. However, this transition is inherently complex, as it involves environmental and social risks, physical limitations, and trade-offs between different dimensions of sustainability. In this context, effective monitoring and modelling of the bioeconomy are essential tools to inform decision-making at various implementation scales. This article reviews empirical research on the monitoring and modelling of the bioeconomy and their implications for decision-making across three main implementation scales: macro (national-global level); meso (regional-city level); and micro (single product, company level). The contribution of this research is twofold: First, it explores existing gaps in the field through the lens of policy implementation levels. Research gaps include the uneven distribution of indicators among sustainability pillars, the lack of standardised monitoring frameworks at the meso and micro levels, and attribution issues in bioeconomy modelling. Second, the article outlines a comprehensive research agenda, indicating specific research lines and their relevance to different implementation scales. Key research avenues, significant at all implementation scales, include enhancing the life cycle perspective, visualising trade-offs and synergies between Sustainable Development Goals, monetising externalities, and further delving into social aspects. KW - Bioeconomy KW - Circular Economy KW - Sustainable Transition KW - Bioeconomy Monitoring Framework KW - Bioeconomy Indicators KW - Life cycle management PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612357 DO - https://doi.org/10.1016/j.jclepro.2024.143816 VL - 477 SP - 1 EP - 16 PB - Elsevier AN - OPUS4-61235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - The Metabuilding Labs approach to Quality Assurance – Standard Operating Procedures and Work Instructions for the O3BETs N2 - The development of the Standard Operating Procedures and Work Instructions for the O3BETs by setting up 3 working roups during Summer 2024 aredescribed. Major achievements are shown and future work is outlined. T2 - 6th General Meeting Metabuilding Labs CY - Szentender, Hungary DA - 26.11.2024 KW - Open innovation test bed KW - Metabuilding Labs KW - Quality management PY - 2024 AN - OPUS4-61866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -