TY - JOUR A1 - You, Zengchao A1 - Hoffmann, V. A1 - Morcillo, Dalia A1 - Agudo Jácome, Leonardo A1 - Leonhardt, Robert A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Abad Andrade, Carlos Enrique T1 - Investigation of aluminum current collector degradation in lithium-ion batteries using glow discharge optical emission spectrometry N2 - In this work, we employed glow discharge optical emission spectrometry (GD-OES) depth profiling as a fast and semi-quantitative method to investigate the aluminum (Al) current collector degradation in commercial lithium cobalt oxide (LCO) pouch cells with no Al2O3 pretreatment. After battery aging, a heterogeneous deposit was found on the surface of the cathode. Gray hotspot areas within an extensive pale white region were formed. Consistent with energy dispersive X-ray (EDX) analysis of micro-cross sections milled via targeted focused ion beam (FIB), an Al-containing layer of approximately 3 µm can be observed using GD-OES. We attribute one main cause of this layer is the degradation of the Al current collector. The nonuniform growth of this layer was investigated by performing GD-OES depth profiling at different in-plane positions. We found that the gray area has a higher mass concentration of Al, probably in metallic form, whereas the white area was probably covered more homogeneously with Al2O3, resulting from the inhomogeneous distribution of the pitting positions on the current collector. Compared to FIB-EDX, GD-OES enables a faster and more convenient depth profile analysis, which allows the more productive characterization of lithium-ion batteries (LIBs), and consequently benefits the development of preferable battery materials. KW - GD-OES KW - depth profiles KW - Li-ion battery KW - battery aging mechanism KW - current collector corrosion PY - 2023 DO - https://doi.org/10.1016/j.sab.2023.106681 SN - 0584-8547 VL - 205 SP - 106681 PB - Elsevier B.V. CY - Amsterdam, Netherlands AN - OPUS4-57383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zink, Simon Yoyo A1 - Rasheed, Mariam T1 - Building DPP Capabilities in SMEs: A TOE-based Empirical Investigation N2 - The implementation of the Digital Product Passport (DPP) under the EU’s Ecodesign for Sustainable Products Regulation (ESPR) aims to enhance transparency, traceability, and sustainability within the value chain. While the DPP promises substantial benefits, its adoption poses significant challenges – especially for small and medium-sized enterprises (SMEs). These firms, which make up 99% of non-financial enterprises in the EU, often face resource constraints that hinder technology implementation. Given the impending mandatory application of DPPs across almost all products groups, SMEs risk market exclusion unless they can successfully build the required capabilities. This research identifies determinants influencing SMEs adoption of DPPs by leveraging the Technology-Organization-Environment (TOE) framework. Specifically, it assesses technological readiness, organizational factors, and external environmental conditions as primary drivers of capability development necessary for effective DPP adoption. Employing a quantitative approach adapted from Mikalef et al. (2022), the study utilizes a survey and structural equation modeling to empirically evaluate how these determinants interact to shape SMEs’ DPP capabilities. This represents the first quantitative application of the TOE framework explicitly addressing capability formation in the context of DPP adoption. Findings from this research will reveal specific technological, organizational, and environmental factors which are instrumental in enabling SMEs to comply with regulatory mandates and effectively manage product data in a DPP context. Practical implications include the identification of capability gaps and targeted policy recommendations to support SMEs. The study aims to foster digital transformation, enhance supply chain sustainability, and ensure broad compliance with emerging EU sustainability regulations. T2 - Colloquium CY - Berlin, Germany DA - 27.06.2025 KW - Digital Product Passport KW - Structural equation analysis KW - SME KW - TOE framework KW - Resource-based view PY - 2025 AN - OPUS4-65443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR ED - Imbert, E. ED - Ladu, Luana T1 - Special issue "Metrics for sustainable chemistry" N2 - This special issue addresses the current need to enhance the conceptual and empirical implementation of sustainability assessment methodologies and related metrics within the GSC (Green and Sustainable Chemistry), collecting 7 papers. KW - Green and sustainable chemistry (GSC) KW - Special issue KW - Sustainability assessment methodologies PY - 2022 UR - https://www.sciencedirect.com/journal/current-opinion-in-green-and-sustainable-chemistry/special-issue/103FS5FCQ68 SN - 2452-2236 SP - 100160 EP - 100844 PB - Elsevier CY - Amsterdam AN - OPUS4-60022 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT ED - Koch, Claudia T1 - Eignung des Rechtsrahmens für eine digitalisierte Qualitätsinfrastruktur - Rechtswissenschaftliche Studie im Rahmen der Initiative QI-Digital N2 - Vor dem Hintergrund zunehmender Digitalisierung der Wirtschaft und weiterer Lebensbereiche ergeben sich große Potentiale für neue digitale Lösungen in der Qualitätsinfrastruktur (QI), sowohl auf technischer als auch prozessualer Ebene zwischen Akteuren. Diese betreffen Unternehmen (Hersteller/Inverkehrbringer/Betreiber) genauso wie Behörden/öffentliche Verwaltung (Genehmiger, Marktüberwacher, u.a.), privatwirtschaftliche Konformitätsbewerter und andere Stakeholder. Der bestehende Rechtsrahmen - von europäischen Richtlinien im Rahmen des New Legislative Frameworks, über bundesdeutsche Gesetzgebung, technische Regeln bis hin zu kommunalen Verordnungen – kann dabei jedoch mitunter so gestaltet sein, dass dieser die Einführung und Nutzung neuer, digitaler Lösungen behindert. Dies kann diverse Anwendungsbereiche betreffen – von Produktsicherheit, über Umwelt- und Verbraucherschutz, hin zu Handelsrecht. Die Studie untersucht systematisch die Eignung des bestehenden Rechtsrahmens für eine digitalisierte QI, insbesondere mit Hinblick auf mögliche Hürden und Anpassungsbedarfen. Zudem wird die Anwendbarkeit von Reallaboren als Testräumen für Innovation und Regulierung auf Fragestellungen der digitalen QI untersucht. KW - Qualitätsinfrastruktur KW - Qualitätssicherung KW - Digitalisierung KW - Digitale Transformation KW - New Legislative Framework KW - Rechtsetzung KW - Rechtsrahmen KW - Reallabor PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-632444 DO - https://doi.org/10.26272/opus4-63244 N1 - Ein Projekt im Rahmen der Initiative QI-Digital, gefördert vom Bundesministerium für Wirtschaft und Energie (www.qi-digital.de). SP - 1 EP - 143 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-63244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT ED - Koch, Claudia ED - Kuch, S. ED - Blöth, A. T1 - Digitale Qualitätsinfrastruktur in Prüf- und Kalibrierlaboren - Vom Trend zum Tagesgeschäft - Ergebnisbericht zum Dialogprozess N2 - Wie kann die Laborwelt als Teil der Qualitätsinfrastruktur (QI) in Deutschland erfolgreich und nachhaltig digitalisiert werden? Was bedeutet das für einen wichtigen Teil dieser Architektur, der Konformitätsbewertung in Prüf- und Kalibrierlaboren? Wo liegen dort die Steine und Hürden auf dem Weg in den digitalen Laboralltag? Und vor allem: Was braucht es, damit die Branche ihre Arbeitsabläufe, Werkzeuge und Prozesse transformieren und die nächsten Schritte in Richtung Ende-zu-Ende digitalisierter Prozesse bis hin zu neuen Geschäftsmodellen gehen kann? Das sind die Leitfragen, zu denen sich über 100 Vertreter:innen aus unterschiedlichen Bereichen der QI- und Labor-Community mit Expert:innen aus den Reihen der Initiative QI-Digital in vier digitalen Praxiswerkstätten austauschten. Der Ergebnisbericht fasst die zentralen Erkenntnisse über Zielbilder, Bedarfe und Anforderungen aus der Praxiswelt zusammen und beinhaltet ein Set an Handlungsempfehlungen zu Maßnahmen, die die digitale Transformation der QI und der Labore vorantreiben können. KW - Qualitätsinfrastruktur KW - Laboratorien KW - Digitalisierung KW - Prüflabor KW - Kalibrierlabor KW - Konformitätsbewertung PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612645 DO - https://doi.org/10.26272/opus4-61264 SP - 1 EP - 64 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -