TY - CONF A1 - Koch, Claudia ED - Jakobs, K. ED - O'Connor, R. V. T1 - Standardization for the Industrial Internet of Things: Engagement by China, Germany and the USA N2 - Standardization is a major challenge for a successful digital transformation of manufacturing. Industry and governments have put this topic on their agenda and stakeholders worldwide are engaged in various Standard Development Organizations, consortia and fora, seeking to shape the standards for the Industrial Internet of Things (IIoT). This paper for the first time analyzes how well participants from the USA, China and Germany are actually represented and engaged in standards development for the IIoT. Using quantitative metrics, the study specifically investigates standardization activities for Wireless Sensor Networks at the Internet Engineering Taskforce (IETF). The results are divergent: Measuring the authorships of IETF Internet-Drafts, China’s successful catch-up in international standardization is confirmed, having even outperformed the USA. When it comes to the authorship of the actual standards at IETF, China could not assert its top position. Here, US authors are leading, followed by German participants. The paper discusses different engagement patterns in depth and analyzes the national economic, institutional and political backgrounds that influence them. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Wireless Sensor Networks KW - IETF KW - Standards PY - 2018 SN - 978-3-95886-229-6 SP - 145 EP - 164 PB - Verlagshaus Mainz GmbH Aachen CY - Aachen AN - OPUS4-45496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Standardization for the Industrial Internet of Things: Engagement by China, Germany and the USA N2 - Standardization is a major challenge for a successful digital transformation of manufacturing. Industry and governments have put this topic on their agenda and stakeholders worldwide are engaged in various Standard Development Organizations, consortia and fora, seeking to shape the standards for the Industrial Internet of Things (IIoT). This paper for the first time analyzes how well participants from the USA, China and Germany are actually represented and engaged in standards development for the IIoT. Using quantitative metrics, the study specifically investigates standardization activities for Wireless Sensor Networks at the Internet Engineering Taskforce (IETF). The results are divergent: Measuring the authorships of IETF Internet-Drafts, China’s successful catch-up in international standardization is confirmed, having even outperformed the USA. When it comes to the authorship of the actual standards at IETF, China could not assert its top position. Here, US authors are leading, followed by German participants. The paper discusses different engagement patterns in depth and analyzes the national economic, institutional and political backgrounds that influence them. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Wireless Sensor Networks KW - Standards KW - IETF PY - 2018 AN - OPUS4-45497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Standardization for the Industrial Internet of Things: Engagement by China, Germany and the USA N2 - Standardization is a major challenge for a successful digital transformation of manufacturing. Industry and governments have put this topic on their agenda and stakeholders worldwide are engaged in various Standard Development Organizations, consortia and fora, seeking to shape the standards for the Industrial Internet of Things (IIoT). This paper for the first time analyzes how well participants from the USA, China and Germany are actually represented and engaged in standards development for the IIoT. Using quantitative metrics, the study specifically investigates standardization activities for Wireless Sensor Networks at the Internet Engineering Taskforce (IETF). The results are divergent: Measuring the authorships of IETF Internet-Drafts, China’s successful catch-up in international standardization is confirmed, having even outperformed the USA. When it comes to the authorship of the actual standards at IETF, China could not assert its top position. Here, US authors are leading, followed by German participants. The paper discusses different engagement patterns in depth and analyzes the national economic, institutional and political backgrounds that influence them. T2 - The 3rd International Symposium on Standardization and Governance CY - Changsha, China DA - 10.07.2018 KW - Wireless Sensor Networks KW - Standards KW - IETF PY - 2018 AN - OPUS4-45498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno A1 - Schlegel, Moritz-Caspar A1 - Akkerman, Floris A1 - Simo, Anne T1 - Evaluation of performance tests of range hoods used for the European energy efficiency label N2 - Several models of range hoods were tested by independent and accredited testing institutes. The results have been compared to the information declared by the manufacturer on the energy efficiency label and the product fiche. The measured electric power input of the lighting System and the measured grease absorption factor often differed significantly from the declared values. The reasons for these observations and the necessary steps to ensure accurate measurements and a meaningful EU energy efficiency label are elucidated. It is suggested that the ranges of the lighting efficiency classes are readjusted to fit the nowadays prevalent LED technology. Furthermore the tolerance in the regulation for the nominal electric power input of the lighting could be extended by a minimum absolute tolerance. The grease absorption test method may need a rework to achieve a satisfying accuracy. T2 - EEDAL 2017 CY - Irvine, California, USA DA - 13.09.2017 KW - Energy label KW - Range hood KW - Cooking fume extractor PY - 2018 SN - 978-92-79-77173-6 DO - https://doi.org/10.2760/68449 SN - 1018-5593 IS - Part III SP - 1065 EP - 1072 AN - OPUS4-43831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno T1 - Berichterstattung – Nape Projekt N2 - Ergebnisse zur modifizierten Fettabscheidung und das weitere Vorgehen wurden vorgestellt. T2 - AK 513.2.5 Dunstabzugshauben Sitzung am 06.03.2018 CY - Frankfurt am Main, Germany DA - 06.03.2018 KW - Normung KW - Dunstabzugshauben KW - Fettabscheidegrad KW - Produktprüfungen PY - 2018 AN - OPUS4-46426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno T1 - Cheaper compliance verification for the energy label of tumble dryers N2 - The energy label is a tool that informs the consumer about the energy consumption of certain appliances. The tumble dryer is one of these appliances that were considered relevant for receiving an energy label in the European Union. All classes and values on the energy label are stated by the manufacturers. In order to guarantee that the manufacturers do not cheat and appliances are labeled correctly, the stated values are checked by the market surveillance of each country in compliance verification tests. However, in the case of tumble dryers these compliance verification tests are very expensive and can only be realized for a small sample size out of models which are available on the market. The fewer compliance verification tests are carried out, the higher is the chance that there are incorrectly labeled appliances on the market. Therefore, a modification of the test standard for tumble dryers has been analyzed which would reduce the costs of a performance test by at least 11 %. T2 - WSED 2018 - World Sustainable Energy Days CY - Wels, Austria DA - 28.02.2018 KW - Tumble dryer KW - Energy label KW - Test standard PY - 2018 AN - OPUS4-47473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno T1 - Unterstützung der Marktüberwachung N2 - Es werden Ergebnisse des NAPE Projekts bezüglich Wäschetrockner und Dunstabzugshauben vorgestellt. T2 - 6. Jour Fixe - Unterstützung der Marktüberwachung CY - Berlin, Germany DA - 23.03.2018 KW - NAPE KW - Wäschetrockner KW - Dunstabzugshauben PY - 2018 AN - OPUS4-47474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hein, Sebastian T1 - Qualitätsmanagement im Wissenschaftsbereich N2 - Die Empfehlungen der Deutschen Forschungsgemeinschaft (DFG) zur Sicherung guter wissenschaftlicher Praxis werden dargestellt und mit Maßnahmen der Qualitätssicherung ergänzt. T2 - Herbstschule 2018 Qualitätssicherung in der analytischen Chemie CY - Berlin, Germany DA - 29.10.2018 KW - Gute wissenschaftliche Praxis KW - Qualitätsmanagement PY - 2018 AN - OPUS4-47065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 - Was ändert sich für Prüf- und Kalibrierlaboratorien? N2 - Die Revision der ISO/IEC 17025 ist abgeschlossen. Der Vortrag gibt einen Überblick über die Einflüsse auf die neue Norm und die Veränderungen, die die neue Ausgabe mit sich bringt. T2 - DGUV-Workshop CY - St. Augustin, Germany DA - 01.03.2018 KW - Konformitätsbewertung KW - ISO/IEC 17025 KW - Prüflaboratorien KW - Akkreditierung PY - 2018 AN - OPUS4-44358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Analysis of the operation of accreditation bodies in Europe N2 - The presentation gives an overview of the PMBT-Management tool and ist first application with eight European accreditation bodies. T2 - EUROLAB TCQA Meeting 2018 CY - Berlin, Germany DA - 15.11.2018 KW - Accreditation KW - EFQM Excellence Model KW - Benchmarking PY - 2018 AN - OPUS4-46613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -