TY - JOUR A1 - Pisonero, J. A1 - Traub, Heike A1 - Cappella, Brunero A1 - Álvarez-Llamas, C. A1 - Méndez, A. A1 - Richter, Silke A1 - Ruiz Encinar, J. A1 - Costa-Fernandez, J. M. A1 - Bordel, N. T1 - Exploring quantitative cellular biomaging and assessment of CdSe/ZnS quantum dots cellular uptake in single cells, using ns-LA-ICP-SFMS N2 - High spatially resolved quantitative bioimaging of CdSe/ZnS Quantum Dots uptake in two kinds of cells is investigated combining laser ablation inductively coupled plasma mass spectrometry and the spatially resolved analysis of dried pL-droplets from a solution with a known concentration of Quantum Dots. Single cells and dried pL-droplets are morphologically characterized by Atomic Force Microscopy. A number concentration of CdSe/ZnS QDs between 3.5 104 and 48 104 is estimated to be uptaken by several selected single cells, after being incubated in the presence of a QDs suspension added to a standard cell culture medium. Mono-elemental bioimaging at subcellular resolution seems to show a higher number concentration of the CdSe/ZnS QDs in the cytosol around the cell nucleus. KW - LA-ICP-SFMS KW - Fast single pulse response KW - Quantitative bioimaging KW - Cellular uptake KW - HT22 KW - HeLa KW - Single cell KW - pL-droplets KW - CdSe/ZnS quantum Dots KW - AFM PY - 2021 DO - https://doi.org/10.1016/j.talanta.2021.122162 SN - 0039-9140 VL - 227 SP - 122162 PB - Elsevier B.V. AN - OPUS4-52121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia T1 - Lithium isotope analysis combining atomic absorption spectroscopy and machine learning N2 - In this poster for the SCIX Conference, we apply an analytical procedure based on the monitoring of the lithium isotope through the partially resolved isotope shift in the electronic transition 22P<-22S around wavelength 670.80 nm using high-resolution continuum source atomic absorption spectrometer (HR-CS-AAS) in combination with machine learning (ML) for the determination of Li Isotope ratio analysis. T2 - SCIX Conference CY - Providence, RI, USA DA - 26.09.2021 KW - Lithium isotope KW - High-resolution continuum source atomic absorption spectrometer KW - Machine learning PY - 2021 AN - OPUS4-53686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Abad Andrade, Carlos Enrique T1 - The use of reference materials to improve the calibration strategy in glow discharge optical emission spectroscopy with machine learning N2 - Glow discharge optical emission spectroscopy (GD-OES) is a technique for the analysis of solids such as metals, semiconductors, and ceramics. A low-pressure glow discharge plasma is applied in this system, which ‘sputters’ and promotes the sample atoms to a higher energy state. When the atoms return to their ground state, they emit light with characteristic wavelengths, which a spectrometer can detect. Thus, GD-OES combines the advantages of ICP-OES with solid sampling techniques, which enables it to determine the bulk elemental composition and depth profiles. However, direct solid sampling methods such as glow-discharge spectroscopy require reference materials for calibration due to the strong matrix effect. Reference materials are essential when the accuracy and reliability of measurement results need to be guaranteed to generate confidence in the analysis. These materials are frequently used to determine measurement uncertainty, validate methods, suitability testing, and quality assurance. In addition, they guarantee that measurement results can be compared to recognized reference values. Unfortunately, the availability of certified reference materials suited to calibrate all elements in different matrix materials is limited. Therefore various calibration strategies and the preparation of traceable matrix-matched calibration standards will be discussed. Machine learning is an essential component of the growing field of data science. Through statistical methods, algorithms are trained to make classifications or predictions, uncovering key insights within data mining projects. Therefore, it was tried in our work to combine GD-OES with machine learning strategies to establish a new and robust calibration model, which can be used to identify the elemental composition and concentration of metals from a single spectrum. For this purpose, copper reference materials from different manufacturers, which contain various impurity elements, were investigated using GD-OES. The obtained spectra information are evaluated with different algorithms (e.g., gradient boosting and artificial neural networks), and the results are compared and discussed in detail. T2 - Winter Conference on Plasma Chemistry 2022 CY - Tucson, AZ, USA DA - 17.01.2022 KW - GDOES KW - Machine learning KW - Reference materials KW - Calibration KW - Cooper PY - 2022 AN - OPUS4-56497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Abad Andrade, Carlos Enrique T1 - What does GD-OES reveal about the aging and manufacturing processes of lithium-ion batteries? N2 - Glow-Discharge Optical Emission Spectroscopy (GD-OES), a powerful analytical technique, sheds light on the two critical aspects of lithium-ion batteries (LIBs): manufacturing and aging 1, 2. We optimized cell production in manufacturing by adjusting parameters, including cathode doping, electrolyte concentration, and pressing force. GD-OES provided in-depth elemental composition and homogeneity analysis, which is crucial for identifying optimal manufacturing conditions. These findings were validated by electrochemical impedance spectroscopy, confirming the quality of the manufactured batteries. Shifting the focus to aging, we use GD-OES for fluorine depth profiling, a key element in understanding polymer and electrolyte degradation. However, fluorine presents analytical challenges. We addressed this by substituting argon with a neon:argon mixture, which significantly enhanced fluorine detection sensitivity. This advancement not only improves accuracy but also holds the potential to guide sustainable and cost-efficient manufacturing strategies. Through its versatility, GD-OES has proven to be a powerful tool for not only optimizing LIB manufacturing processes but also gaining deeper insights into their aging mechanisms. This research extends beyond academic interest, offering tangible benefits for the industry by translating into improved battery quality, extended lifespan, and overall performance. T2 - The 6th International Glow Discharge Spectroscopy Symposium CY - Liverpool, United Kingdom DA - 21.04.2024 KW - GD-OES KW - Depth profiles KW - Lithium KW - Battery KW - Fluorine KW - Aging KW - Manufacturing KW - Glow-discharge PY - 2024 AN - OPUS4-59945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Monavari, Mehran A1 - Prellwitz, Matthias A1 - Koch, Claudia A1 - van de Kreeke, Johannes A1 - Melzer, Michael A1 - Richter, Silke T1 - The Digital Reference Material Document: From Paper Certificates to Interoperable Data Objects in Digital Quality Infrastructure N2 - Reference materials (RMs) are essential for traceable and reliable measurements in science and industry, yet their certificate/document remain largely paper-based. The Digital Reference Material Document (DRMD) project at BAM introduces a transformative approach by converting traditional RM certificates/documents into machine-interpretable, XML-based digital assets. Building on the Digital Calibration Certificate framework, DRMDs encode ISO 33401 requirements and integrate semantic standards like D-SI and material identifiers. These digital documents support automated data exchange, integration into laboratory systems, and interoperability e.g. via asset administration shells and data spaces. The paper presents the DRMD schema concept, and outlines the path toward international harmonization and large-scale deployment, positioning DRMDs as a cornerstone of a digital quality infrastructure. T2 - IMEKO TC-6 International Conference on Metrology and Digital Transformation - M4DConf 2025 DA - 03.09.2025 KW - Digital Reference Material Document KW - Quality Infrastructure KW - Reference Material Certificate KW - DRMD PY - 2025 UR - https://www.m4dconf.org/ UR - https://www.sciencedirect.com/journal/measurement-digitalization SP - 1 EP - 6 AN - OPUS4-64269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Keynote: Towards a digital ecosystem for quality infrastructure: DCC, digital reference material documents and beyond N2 - The transition from a document-based to a data-driven quality infrastructure (QI) that is networked, automated, and intelligent will significantly enhance efficiency and transparency. More importantly, the digitalization of QI strengthens trust in safety and quality. To achieve this, BAM together with Germany’s central QI institutions partnered in the initiative QI-Digital to jointly establish a digital ecosystem for QI. This initiative leverages recognized standards and latest technologies to seamlessly integrate QI procedures, processes, and tools, facilitating cross-system networking among stakeholders in QI. Through concrete use cases and projects, the initiative develops, tests, and demonstrates practical solutions. This talk will provide insights into the comprehensive roadmap for the digital transformation of QI, illustrating diverse areas of action. The talk specifically highlights the potential of data spaces for a digital QI. It further provides a deep dive into machine-readable quality documents, focusing on digital reference material documents (DRMDs): Based on the digital calibration certificate (DCC), the XML schema developed at BAM incorporates ISO 17034 requirements in a computer-readable format, offering significant process improvements. DRMDs enable direct integration into laboratory information systems, reduce manual data entry errors, and enhance traceability. Standardized data formats simplify information exchange between systems and refine quality control. To expedite market adoption, BAM has developed a software tool for creating DRMDs and an AI tool for converting existing PDF certificates into DRMDs. These demonstrators, along with the inclusion of DRMDs in the reference materials database COMAR, showcase their functionality and potential to a broader community. T2 - IMEKO Joint Conference (TC8 - TC11 - TC24) CY - Torino, Italy DA - 14.09.2025 KW - Qualitätsinfrastruktur KW - Digitalisierung KW - Digital transformation KW - Data spaces KW - Digital product passport KW - Digitaler Produktpass PY - 2025 AN - OPUS4-64274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Entwicklungen zur Circular Economy in Rechssetzung und Normung N2 - Zusammenfassung der Implementierung von Circular Economy Prinzipien in der Rechtssetzung und Normung. Schwerpunkte sind das EU-Produktrecht, Bewertungsmethoden zur Zirkularität von Produkten und angekündigte EU-Rechtsrahmen und ihre Ausgestaltung. T2 - Industrieforum Global Environmental Compliance CY - Online meeting DA - 06.11.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung KW - Ecodesign PY - 2025 AN - OPUS4-64601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Teutenberg, Thorsten A1 - Blöth, Anton A1 - Bolling, Janina A1 - Kuch, Susanne A1 - Meyer, Lena A1 - Rösch, Richard T1 - Auf dem Weg in die digitale Transformation N2 - Die Digitalisierung in der Laborbranche stellt eine komplexe Herausforderung dar – nicht zuletzt aufgrund zahlreicher Einzelprojekte und vieler proprietärer Insellösungen. Um eine konsequente und wirkungsvolle Labordigitalisierung und Prozessautomatisierung zu erreichen, braucht es eine übergreifende Sichtbarkeit und Vernetzung bestehender Initiativen. Diese Notwendigkeit haben verschiedene Akteure der Laborbranche erkannt und, angestoßen durch die Initiative QI-Digital, den Digital LabHub ins Leben gerufen. Ziel ist es, eine Plattform für Wissensaustausch und -transfer, gegenseitige Unterstützung und praxisnahe Umsetzung zu schaffen – offen für Labore aller Branchen und Anwendungsfelder. Der Digital LabHub soll gezielte Hilfestellung beim Einstieg in die Digitalisierung bieten, Labore zukunftssicher aufstellen und dabei helfen, regulatorische Anforderungen zu erfüllen. KW - Digitale Transformation KW - Digitalisierung KW - Kalibrierlabor KW - Prüflabor KW - QI-Digital KW - Qualitätsinfrastruktur PY - 2025 UR - https://analyticalscience.wiley.com/content/article-do/auf-dem-weg-die-digitale-transformation SP - 1 EP - 3 PB - Wiley Analytical Science CY - Weinheim AN - OPUS4-64482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blöth, Anton A1 - Bolling, Janina A1 - Teutenberg, Thorsten A1 - Meyer, Lena T1 - Digital LabHub - Gemeinsam die digitale Transformation der Laborbranche vorantreiben N2 - Als zentrale Drehscheibe für Information und Vernetzung begleitet der Digital LabHub Labore auf dem Weg der digitalen Transformation: praxisnah, kollaborativ und zukunftsorientiert. Die Drehscheibe bietet Orientierung, fördert den Austausch und macht bestehende Initiativen sichtbar. Der Digital LabHub bringt Akteure aus der und um die Laborbranche zusammen, um Wissen zu teilen, Synergien zu schaffen und Innovationen voranzutreiben. T2 - QI-Digital Forum 2025 CY - Berlin, Germany DA - 08.10.2025 KW - Digitale Transformation KW - Digitalisierung KW - Kalibrierlabor KW - Prüflabor KW - QI-Digital KW - Qualitätsinfrastruktur PY - 2025 AN - OPUS4-64481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - SMART Standards und digitale Qualitätsinfrastruktur N2 - Die digitale Transformation der Qualitätsinfrastruktur (QI) bietet vielfältige Potentiale für mehr Effizienz, Transparenz und Vertrauen bei der Sicherung und dem Nachweis der Qualität von Produkten und Anwendungen. SMART Standards sind dabei ein wesentlicher Baustein im komplexen digitalen Ökosystem einer solchen modernen QI. Ihre wirksame Integration erfordert klare Anwendungsszenarien und Anforderungen. Der Vortrag bietet einen Überblick über eine moderne QI und ihr digitales Ökosystem. Insbesondere die Rolle von SMART Standards wird herausgearbeitet. Mithilfe von zwei Use Cases aus der BAM - Additive Fertigung und Zulassung von Transportbehältern für radioaktive Stoffe - werden User Stories vorgestellt. Dieser einführende Vortrag soll im Workshop des IDiS Plenums als Grundlage für die Entwicklung weiterer User Stories und Ableitung von Anforderungen an SMART Standards dienen. T2 - 14. IDiS Plenum CY - Berlin, Germany DA - 07.10.2025 KW - Qualitätsinfrastruktur KW - SMART Standards KW - Digitalisierung KW - QI-Digital PY - 2025 AN - OPUS4-64528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Die Rolle der ESPR bei der Transformation zu einer Circular Economy N2 - Die Präsentation fasst die aktuellen Entwicklungen zur Umsetzung einer Circular Economy in der EU zusammen. Besonderes Augenmerk wird auf die aktuelle Ausgestaltung der Rechtslandschaft, sowie Möglichkeiten der wissenschaftsbasierten Politikberatung und rechtsetzungsbegleitenden Normung gelegt. Beendet wird der Vortrag mit einem Überblick über zukünftige Verknüpfungen zum Circular Economy Act, Advanced Materials Act, Single Market Strategy der Europäischen Kommission sowie dem Digitalen Produktpass. T2 - Sustainability Heroes 2025 CY - Online meeting DA - 25.11.2025 KW - Circular economy KW - Rechtssetzung KW - Normung KW - Politikberatung KW - Ecodesign PY - 2025 AN - OPUS4-64884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bresch, Harald T1 - The digital product passport N2 - This presentation contains information for industry and the scientific communitiy about the new digital product passport and the demands from the EU. Furthermore a short overview is given about the different supporting activities which are currently under developement by BAM. T2 - 3. Netzwerktag Cluster Nanotechnologie CY - Würzburg, Germany DA - 02.07.2025 KW - DPP KW - ESPR KW - Product Passport KW - Ökodesignrichtlinie KW - DMP PY - 2025 AN - OPUS4-64964 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klaus, Christian A1 - Soruco Aloisio, Ricardo A1 - Koch, Claudia A1 - Prellwitz, Matthias T1 - Towards Safety and Accuracy of Hydrogen Refuelling Stations through Digital Twins N2 - This paper presents digital quality infrastructure methods for hydrogen refueling stations using the Asset Administration Shell as a standardized digital twin. Implemented at BAM’s test platform, it integrates real-time sensor data, calibration certificates, and compliance documents to support traceable, interoperable asset management. In combination with AI and semantic tools, the system will enable predictive maintenance, remote audits, and improved safety. This approach reduces downtime, enhances transparency, and offers a scalable model demonstrating the potential of digital twins in advancing metrological traceability and operational efficiency in hydrogen technologies. T2 - IMEKO TC-6 International Conference on Metrology and Digital Transformation - M4DConf 2025 CY - Benevento, Italy DA - 03.09.2025 KW - Datenintregration KW - IT KW - Verwaltungsschale KW - Infrastruktur KW - OT KW - Open Source KW - Software PY - 2025 UR - https://www.m4dconf.org/ UR - https://www.sciencedirect.com/journal/measurement-digitalization SP - 1 EP - 6 AN - OPUS4-64951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schutter, Jan David A1 - Eberhardt, Karl A1 - Elert, Anna Maria A1 - Radnik, Jörg A1 - Geißler, Daniel A1 - Özcan Sandikcioglu, Özlem T1 - Synthesis and characterization of lipopolysaccharide (LPS) anchored polystyrene microparticles as a synthetic model system for attachment studies N2 - Outer membrane lipopolysaccharides (LPS) play a crucial role in determining attachment behavior and pathogenicity of bacteria. The aim of this study was to develop a simple procedure for anchoring bacterial lipopolysaccharides to polystyrene (PS) microparticles as a model system for in situ attachment studies. By using a swellcapture methodology, commercially available LPS of Pseudomonas aeruginosa (strain ATCC 27316 serotype 10.22) was anchored onto PS microparticles in a proof-of-concept study. A detailed chemical and morphological characterization has proven the success of LPS incorporation. It was shown that the coverage and structure of the LPS film was concentration dependent. The procedure can easily be adapted to LPS of other bacterial strains to generate a synthetic model toolkit for attachment studies. KW - Bacterial lipopolysaccharides KW - Pseudomonas aeruginosa KW - Polystyrene microparticles KW - Swell-capture KW - Biomimicry PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-579818 DO - https://doi.org/10.1016/j.colsurfb.2023.113301 SN - 0927-7765 VL - 226 SP - 1 EP - 7 PB - Elsevier B.V. AN - OPUS4-57981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT ED - Koch, Claudia T1 - Eignung des Rechtsrahmens für eine digitalisierte Qualitätsinfrastruktur - Rechtswissenschaftliche Studie im Rahmen der Initiative QI-Digital N2 - Vor dem Hintergrund zunehmender Digitalisierung der Wirtschaft und weiterer Lebensbereiche ergeben sich große Potentiale für neue digitale Lösungen in der Qualitätsinfrastruktur (QI), sowohl auf technischer als auch prozessualer Ebene zwischen Akteuren. Diese betreffen Unternehmen (Hersteller/Inverkehrbringer/Betreiber) genauso wie Behörden/öffentliche Verwaltung (Genehmiger, Marktüberwacher, u.a.), privatwirtschaftliche Konformitätsbewerter und andere Stakeholder. Der bestehende Rechtsrahmen - von europäischen Richtlinien im Rahmen des New Legislative Frameworks, über bundesdeutsche Gesetzgebung, technische Regeln bis hin zu kommunalen Verordnungen – kann dabei jedoch mitunter so gestaltet sein, dass dieser die Einführung und Nutzung neuer, digitaler Lösungen behindert. Dies kann diverse Anwendungsbereiche betreffen – von Produktsicherheit, über Umwelt- und Verbraucherschutz, hin zu Handelsrecht. Die Studie untersucht systematisch die Eignung des bestehenden Rechtsrahmens für eine digitalisierte QI, insbesondere mit Hinblick auf mögliche Hürden und Anpassungsbedarfen. Zudem wird die Anwendbarkeit von Reallaboren als Testräumen für Innovation und Regulierung auf Fragestellungen der digitalen QI untersucht. KW - Qualitätsinfrastruktur KW - Qualitätssicherung KW - Digitalisierung KW - Digitale Transformation KW - New Legislative Framework KW - Rechtsetzung KW - Rechtsrahmen KW - Reallabor PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-632444 DO - https://doi.org/10.26272/opus4-63244 N1 - Ein Projekt im Rahmen der Initiative QI-Digital, gefördert vom Bundesministerium für Wirtschaft und Energie (www.qi-digital.de). SP - 1 EP - 143 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-63244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - You, Zengchao A1 - Hoffmann, V. A1 - Morcillo, Dalia A1 - Agudo Jácome, Leonardo A1 - Leonhardt, Robert A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Abad Andrade, Carlos Enrique T1 - Investigation of aluminum current collector degradation in lithium-ion batteries using glow discharge optical emission spectrometry N2 - In this work, we employed glow discharge optical emission spectrometry (GD-OES) depth profiling as a fast and semi-quantitative method to investigate the aluminum (Al) current collector degradation in commercial lithium cobalt oxide (LCO) pouch cells with no Al2O3 pretreatment. After battery aging, a heterogeneous deposit was found on the surface of the cathode. Gray hotspot areas within an extensive pale white region were formed. Consistent with energy dispersive X-ray (EDX) analysis of micro-cross sections milled via targeted focused ion beam (FIB), an Al-containing layer of approximately 3 µm can be observed using GD-OES. We attribute one main cause of this layer is the degradation of the Al current collector. The nonuniform growth of this layer was investigated by performing GD-OES depth profiling at different in-plane positions. We found that the gray area has a higher mass concentration of Al, probably in metallic form, whereas the white area was probably covered more homogeneously with Al2O3, resulting from the inhomogeneous distribution of the pitting positions on the current collector. Compared to FIB-EDX, GD-OES enables a faster and more convenient depth profile analysis, which allows the more productive characterization of lithium-ion batteries (LIBs), and consequently benefits the development of preferable battery materials. KW - GD-OES KW - depth profiles KW - Li-ion battery KW - battery aging mechanism KW - current collector corrosion PY - 2023 DO - https://doi.org/10.1016/j.sab.2023.106681 SN - 0584-8547 VL - 205 SP - 106681 PB - Elsevier B.V. CY - Amsterdam, Netherlands AN - OPUS4-57383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT ED - Koch, Claudia ED - Kuch, S. ED - Blöth, A. T1 - Digitale Qualitätsinfrastruktur in Prüf- und Kalibrierlaboren - Vom Trend zum Tagesgeschäft - Ergebnisbericht zum Dialogprozess N2 - Wie kann die Laborwelt als Teil der Qualitätsinfrastruktur (QI) in Deutschland erfolgreich und nachhaltig digitalisiert werden? Was bedeutet das für einen wichtigen Teil dieser Architektur, der Konformitätsbewertung in Prüf- und Kalibrierlaboren? Wo liegen dort die Steine und Hürden auf dem Weg in den digitalen Laboralltag? Und vor allem: Was braucht es, damit die Branche ihre Arbeitsabläufe, Werkzeuge und Prozesse transformieren und die nächsten Schritte in Richtung Ende-zu-Ende digitalisierter Prozesse bis hin zu neuen Geschäftsmodellen gehen kann? Das sind die Leitfragen, zu denen sich über 100 Vertreter:innen aus unterschiedlichen Bereichen der QI- und Labor-Community mit Expert:innen aus den Reihen der Initiative QI-Digital in vier digitalen Praxiswerkstätten austauschten. Der Ergebnisbericht fasst die zentralen Erkenntnisse über Zielbilder, Bedarfe und Anforderungen aus der Praxiswelt zusammen und beinhaltet ein Set an Handlungsempfehlungen zu Maßnahmen, die die digitale Transformation der QI und der Labore vorantreiben können. KW - Qualitätsinfrastruktur KW - Laboratorien KW - Digitalisierung KW - Prüflabor KW - Kalibrierlabor KW - Konformitätsbewertung PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612645 DO - https://doi.org/10.26272/opus4-61264 SP - 1 EP - 64 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung genormter Managementsysteme N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen. Ende 2019 wurden in einer ersten Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung von Managementsystemen und ihren Wirkungen befragt. Diese umfasste weit verbreitete genormte Managementsysteme wie ISO 9001 und ISO 14001 genauso wie bisher wenig untersuchte Systeme wie die ISO 50001 oder ISO/IEC 27001. Es konnten 180 Fragebögen für die vorliegende Studie ausgewertet werden. KW - QI-FoKuS KW - Managementsysteme KW - ISO 9001 KW - ISO/IEC 27001 KW - ISO 50001 KW - ISO 14001 KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-510831 SN - 978-3-9818564-3-9 DO - https://doi.org/10.26272/opus4-51083 VL - 1 SP - 1 EP - 44 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mirtsch, Mona A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Blind, K. T1 - Die Nutzung und Wirkung der Norm ISO/IEC 27001 für Informationssicherheit in Unternehmen in Deutschland N2 - Das Ziel der Initiative QI-FoKuS ist es, eine Datenbasis für neue wissenschaftliche Erkenntnisse zu Einflussfaktoren und Effekten in der Konformitätsbewertung und Akkreditierung zu schaffen und hierbei insbesondere auch auf aktuelle Trends und Entwicklungen einzugehen. Von Januar bis März 2020 wurden in einer Online-Erhebung Unternehmen verschiedener Branchen und Größenklassen in Deutschland zur Nutzung und den Wirkungen ihres zertifizierten Managementsystems für Informationssicherheit nach ISO/IEC 27001 befragt. Es konnten 125 vollständig ausgefüllte Fragebögen für die vorliegende Studie ausgewertet werden. KW - Managementsysteme KW - ISO/IEC 27001 KW - Informationssicherheit KW - Zertifizierung KW - Konformitätsbewertung KW - Akkreditierung KW - QI-FoKuS PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517922 DO - https://doi.org/10.26272/opus4-51792 VL - 2 SP - 1 EP - 28 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Blind, K. T1 - CORONA-MONITOR - Auswirkungen der Corona-Pandemie auf Konformitätsbewertung und Konformitätsbewertungsstellen in Deutschland N2 - Die Studie fasst Ergebnisse einer Befragung von Konformitätsbewertungsstellen zu deren Lage und den Aussichten während der Corona-Pandemie zusammen. Besondere Schwerpunkte wurden auf die wirtschaftlichen Auswirkungen und die Arbeitsfähigkeit, aber auch auf die Resilienz und die Wirkungen auf die Digitalisierung gelegt. KW - Corona KW - COVID-19 KW - Resilienz KW - Qualitätsinfrastruktur KW - Prüfung KW - Zertifizierung KW - Kalibrierung KW - Inspektion KW - Labor KW - Laboratorium KW - Studie KW - Befragung KW - Digitalisierung PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-518276 UR - www.qi-fokus.de DO - https://doi.org/10.26272/opus4-51827 VL - 3 SP - 1 EP - 26 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -