TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 - Was ändert sich für Prüf- und Kalibrierlaboratorien? N2 - Die Revision der ISO/IEC 17025 ist abgeschlossen. Der Vortrag gibt einen Überblick über die Einflüsse auf die neue Norm und die Veränderungen, die die neue Ausgabe mit sich bringt. T2 - DGUV-Workshop CY - St. Augustin, Germany DA - 01.03.2018 KW - Konformitätsbewertung KW - ISO/IEC 17025 KW - Prüflaboratorien KW - Akkreditierung PY - 2018 AN - OPUS4-44358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno A1 - Schlegel, Moritz-Caspar A1 - Akkerman, Floris A1 - Simo, Anne T1 - Evaluation of performance tests of range hoods used for the European energy efficiency label N2 - Several models of range hoods were tested by independent and accredited testing institutes. The results have been compared to the information declared by the manufacturer on the energy efficiency label and the product fiche. The measured electric power input of the lighting System and the measured grease absorption factor often differed significantly from the declared values. The reasons for these observations and the necessary steps to ensure accurate measurements and a meaningful EU energy efficiency label are elucidated. It is suggested that the ranges of the lighting efficiency classes are readjusted to fit the nowadays prevalent LED technology. Furthermore the tolerance in the regulation for the nominal electric power input of the lighting could be extended by a minimum absolute tolerance. The grease absorption test method may need a rework to achieve a satisfying accuracy. T2 - EEDAL 2017 CY - Irvine, California, USA DA - 13.09.2017 KW - Energy label KW - Range hood KW - Cooking fume extractor PY - 2018 SN - 978-92-79-77173-6 DO - https://doi.org/10.2760/68449 SN - 1018-5593 IS - Part III SP - 1065 EP - 1072 AN - OPUS4-43831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Wie weiter in Ressourcenfragen? N2 - Entwicklung der gesetzlichen Anforderungen an die Ressourceneffizienz und aktuelle Aktivitäten der Europäischen Kommission. T2 - Praxisworkshop Marktüberwachung CY - Gernsbach, Germany DA - 16.05.2018 KW - Ressourcen KW - Energiepolitik KW - Ökodesign PY - 2018 AN - OPUS4-44950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ringleben-Fricke, Thomas A1 - Schlegel, Moritz-Caspar T1 - Einführung in die Nutzung der Internetplattform Erfahrungsaustausch N2 - Einführungsveranstaltung zur Nutzung einer Internetplattform für die Marktüberwachung (erstellt von einer AG des BLA EVPG/EnVKG, Vorsitz HH und BAM) T2 - Praxisworkshop Marktüberwachung CY - Gernsbach, Germany DA - 16.05.2018 KW - Internetplattform KW - Marktüberwachung KW - Ökodesign KW - Energieverbrauchskennzeichnung PY - 2018 AN - OPUS4-44951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Neues Energielabel N2 - Warum gibt es ein neues Label und welche Änderungen ergeben sich daraus? Kurzvortrag anlässlich der VZBV-Veranstaltung "Mehr Transparenz für Verbraucher durch Energielabel und Energieausweis" im Rahmen der Berliner Energietage 2018 T2 - Berliner Energietage 2018 CY - Berlin, Germany DA - 07.05.2018 KW - Energieverbrauchskennzeichnung KW - Verbraucherschutz KW - Energieeffizienz PY - 2018 AN - OPUS4-44869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona ED - Jakobs, K. ED - O'Connor, R.V. T1 - The Role of Conformity Assessment in the Digital Transformation: Focusing on Cybersecurity N2 - Digital transformation and especially the dramatic rise of products and services connected to the Internet of Things raise the questions on how to deal with the increasing risks related to Privacy and Cybersecurity. Presumably, these risks seem to be insufficiently reflected in the European Union’s current regulative system – by being neither part of the traditional definition of a safe product nor part of product-specific vertical or horizontal directives. Certification based on standards as underlying requirements has been identified by policymakers as an instrument to address this issue. The latest European draft regulation aims at increasing security and trust in ICT products and services, and reducing current European market fragmentation with a new Cybersecurity Certification Framework. Based on the results of a qualitative analysis of stakeholder statements on the current proposal on the Cybersecurity Act, this paper discusses elements of the proposed Cybersecurity Certification Framework. As a theoretical background, this paper provides definitions of the terms Safety, IT-security, and Cybersecurity, presents selected Cybersecurity-related standards and provides an outlook on future challenges to Conformity Assessment in the digital transformation. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Conformity Assessment KW - Cybersecurity KW - Certification KW - IT-Security PY - 2018 SN - 978-3-95886-229-6 VL - 2018 SP - 183 EP - 202 PB - Verlagshaus Mainz GmbH Aachen CY - Aachen AN - OPUS4-45686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mirtsch, Mona T1 - The Role of Conformity Assessment in the Digital Transformation: Focusing on Cybersecurity N2 - Digital transformation and especially the dramatic rise of products and services connected to the Internet of Things raise the questions on how to deal with the increasing risks related to Privacy and Cybersecurity. Presumably, these risks seem to be insufficiently reflected in the European Union’s current regulative system – by being neither part of the traditional definition of a safe product nor part of product-specific vertical or horizontal directives. Certification based on standards as underlying requirements has been identified by policymakers as an instrument to address this issue. The latest European draft regulation aims at increasing security and trust in ICT products and services, and reducing current European market fragmentation with a new Cybersecurity Certification Framework. Based on the results of a qualitative analysis of stakeholder statements on the current proposal on the Cybersecurity Act, this paper discusses elements of the proposed Cybersecurity Certification Framework. As a theoretical background, this paper provides definitions of the terms Safety, IT-security, and Cybersecurity, presents selected Cybersecurity-related standards and provides an outlook on future challenges to Conformity Assessment in the digital transformation. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Cybersecurity KW - Certification KW - Conformity Assessment KW - IT-Security PY - 2018 AN - OPUS4-45687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simo, Anne A1 - Knieschewski, Arno A1 - Palkowski, Carsten T1 - NAPE Unterstützung der Marktüberwachung N2 - Ergebnisse und Erkenntnisse aus dem NAPE-Projekt "Unterstützung der Marktüberwachung" T2 - Abteilungskolloquium CY - Berlin, Germany DA - 31.10.2018 KW - Energieeffizienz PY - 2018 AN - OPUS4-46541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Gut Ding braucht Weile - Ressourceneffizienz im Ökodesign und das „Winterpaket“ N2 - Die Kreislaufwirtschaftsinitiative der Europäischen Kommission fordert klar grundlegende Aspekte der Kreislaufwirtschaft in bereits bestehende Rechtsrahmen einzubetten. Anforderungen zur gesetzlich vorgeschriebenen Lebensdauer, Reparierbarkeit und Recyclingfähigkeit von Produkten sollen zukünftig auf europäischer Ebene ins Leben gerufen werden. Ein geeignetes Spielfeld ist die Ökodesign-Richtlinie. Momentan regelt sie primär die Energieeffizienz von energieverbrauchsrelevanten Produkten, doch der Fokus wird aktuell um Anforderungen an den nachhaltigen Einsatz von Ressourcen erweitert. Bei den gegenwärtigen Aktivitäten im Ökodesign steht der Normungsauftrag M/543 im Zentrum. Es wurde 2015 von der Europäischen Kommission an CEN/CENELEC vergeben und später stieß auch ETSI dazu. Bislang sind acht generische EN-Normen und zwei Fachberichte (Technical Report (TR)) geplant. Sie sollen grundlegende Aspekte der Nachhaltigkeit von energieverbrauchsrelevanten Produkten, die von der Ökodesign-Richtlinie betroffen sind, abdecken. Trotz der zu erwartenden hohen Reichweite dieses Vorhabens scheinen die Inhalte und der eigentliche Zweck der zu erarbeitenden Normen vielen Marktakteuren noch nicht vollständig bekannt zu sein. Daher hat ein nationaler Zentralverband eingeladen zu berichten. In dem Vortrag werden Antworten auf folgende Fragen gegeben: Warum im Ökodesign? Was ist geplant? Was ist betroffen? Worum geht es in den Normen? T2 - AK-Sitzung CY - ZVEI, Frankfurt a. Main, Germany DA - 19.09.2018 KW - Normung KW - Ressourceneffizienz KW - Ökodesign KW - Kreislaufwirtschaft PY - 2018 AN - OPUS4-45992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno T1 - Berichterstattung – Nape Projekt N2 - Ergebnisse zur modifizierten Fettabscheidung und das weitere Vorgehen wurden vorgestellt. T2 - AK 513.2.5 Dunstabzugshauben Sitzung am 06.03.2018 CY - Frankfurt am Main, Germany DA - 06.03.2018 KW - Normung KW - Dunstabzugshauben KW - Fettabscheidegrad KW - Produktprüfungen PY - 2018 AN - OPUS4-46426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Thiele, Joachim T1 - Meilensteine des deutschen Akkreditierungssystems - Beiträge des Deutschen Akkreditierungsrates DAR - 04. März 1991 bis 31. Dezember 2009 N2 - Diese Studie soll aufzeigen, wie sich das Akkreditierungswesen in Deutschland über einen Zeitraum von mehr als 25 Jahren entwickelt hat. Die Bundesanstalt für Materialforschung und -prüfung (BAM) und der Deutsche Akkreditierungsrat DAR haben bei dieser Entwicklung wichtige Beiträge geleistet. Leitmotiv dieser Studie ist eine These des Philosophen Udo Marquard, zitiert im Vorwort der BAM Chronik 1871-1996, „Die neue Welt kann nicht sein ohne die alten Fertigkeiten – Zukunft braucht Herkunft“. Die Erfahrungen bei der Entwicklung des deutschen Akkreditierungssystems sollen zusammengefasst werden, um Schlussfolgerungen für die Zukunft ableiten zu können, da bisher keine zusammenfassende und überblicksmäßige Darstellung des gesamten Entwicklungsprozesses vorhanden ist. Ziele dieser Studie sind die Darstellungen — der Beiträge des deutschen Akkreditierungssystems zur gegenseitigen Anerkennung von Zertifikaten und Prüfberichten in der EU zur Mitgestaltung des gemeinsamen Marktes der EU und zum Abbau internationaler tarifärer Handelshemmnisse, - der Komplexität von Akkreditierung und Konformitätsbewertungsvorgängen in einzelnen Problemkreisen, - der Entwicklung des deutschen Akkreditierungssystems von den Anfängen bis zur Tätigkeitsaufnahme der Deutschen Akkreditierungsstelle (DAkkS GmbH) am 1. Januar 2010, - der Rolle des Deutschen Akkreditierungsrates (DAR) (04.03.1991 bis 31.12.2009) anhand wichtiger Eckdaten und Hauptergebnisse aus seinem Präsidium und den vier Ausschüssen, ATF DAR-Ausschuss für Technische Fragen AIZ DAR-Ausschuss für Internationale Zusammenarbeit AZ DAR-Ausschuss für Zusammenarbeit gesetzlich geregelter und gesetzlich nicht geregelter Bereich ABT DAR-Ausschuss für Begutachtertraining - der Wege zum Finden eines nationalen Konsenses mit mehreren privaten und staatlichen Akkreditierungsstellen, um eine einheitliche Außenvertretung in internationalen Gremien zu gewährleisten, - der ständigen Bemühungen um enge Zusammenarbeit zwischen gesetzlich nicht geregeltem und gesetzlich geregeltem Bereich, - der Aktivitäten und Ergebnisse, um zu einem einheitlichen deutschen Akkreditierungssystem zu gelangen, der Rolle der BAM im deutschen Akkreditierungswesen, der Entstehung des BAM-Akkreditierungssystems (BAS) und seine Überleitung in das Deutsche Akkreditierungssystem Prüfwesen (DAP), - der Führung der Geschäftsstelle des DAR und des Akkreditierungsbeirats (AKB) des Bundesministerium für Wirtschaft und Energie (BMWi) (2006 bis 2009 und ab 2010) - der Tätigkeiten des BAM-Evaluierungsausschusses. KW - Akkreditierung KW - Zertifizierung KW - Qualitätssicherung KW - Qualitätsmanagement KW - Konformitätsbewertung PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-477911 SN - 978-3-9818564-0-8 SP - 1 EP - 231 PB - Eigenverlag BAM CY - Berlin AN - OPUS4-47791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia ED - Jakobs, K. ED - O'Connor, R. V. T1 - Standardization for the Industrial Internet of Things: Engagement by China, Germany and the USA N2 - Standardization is a major challenge for a successful digital transformation of manufacturing. Industry and governments have put this topic on their agenda and stakeholders worldwide are engaged in various Standard Development Organizations, consortia and fora, seeking to shape the standards for the Industrial Internet of Things (IIoT). This paper for the first time analyzes how well participants from the USA, China and Germany are actually represented and engaged in standards development for the IIoT. Using quantitative metrics, the study specifically investigates standardization activities for Wireless Sensor Networks at the Internet Engineering Taskforce (IETF). The results are divergent: Measuring the authorships of IETF Internet-Drafts, China’s successful catch-up in international standardization is confirmed, having even outperformed the USA. When it comes to the authorship of the actual standards at IETF, China could not assert its top position. Here, US authors are leading, followed by German participants. The paper discusses different engagement patterns in depth and analyzes the national economic, institutional and political backgrounds that influence them. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Wireless Sensor Networks KW - IETF KW - Standards PY - 2018 SN - 978-3-95886-229-6 SP - 145 EP - 164 PB - Verlagshaus Mainz GmbH Aachen CY - Aachen AN - OPUS4-45496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia T1 - Standardization for the Industrial Internet of Things: Engagement by China, Germany and the USA N2 - Standardization is a major challenge for a successful digital transformation of manufacturing. Industry and governments have put this topic on their agenda and stakeholders worldwide are engaged in various Standard Development Organizations, consortia and fora, seeking to shape the standards for the Industrial Internet of Things (IIoT). This paper for the first time analyzes how well participants from the USA, China and Germany are actually represented and engaged in standards development for the IIoT. Using quantitative metrics, the study specifically investigates standardization activities for Wireless Sensor Networks at the Internet Engineering Taskforce (IETF). The results are divergent: Measuring the authorships of IETF Internet-Drafts, China’s successful catch-up in international standardization is confirmed, having even outperformed the USA. When it comes to the authorship of the actual standards at IETF, China could not assert its top position. Here, US authors are leading, followed by German participants. The paper discusses different engagement patterns in depth and analyzes the national economic, institutional and political backgrounds that influence them. T2 - 23rd EURAS Annual Standardisation Conference "Standards for a Smarter Future" CY - Dublin, Irland DA - 13.06.2018 KW - Wireless Sensor Networks KW - Standards KW - IETF PY - 2018 AN - OPUS4-45497 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - van de Kreeke, Johannes A1 - Pradel, Rita T1 - COMAR, where do you go? N2 - Currently BAM is undertaking efforts to recode the COMAR database and redefine its profile. These efforts are explained and placed into the broader perspective of the international RM market. T2 - REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY CY - Yekaterinburg, Russian Federation DA - 11.09.2018 KW - Reference materials KW - Proficiency testing KW - COMAR KW - EPTIS KW - RM and PT PY - 2018 AN - OPUS4-46175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - van de Kreeke, Johannes A1 - Pradel, Rita T1 - COMAR database: current efforts N2 - Currently BAM is making efforts to recode COMAR, the database for CRMs and reshape its profile as a database intended for qualitatively top-of-the-market CRMs. These efforts are highlighted and placed into the broad perspective of the international RM markets. A link to EPTIS, the database for PT schemes as a blueprint for the recoding is provided. T2 - BERM-15: International Symposium on Biological and Environmental Reference Materials CY - Berlin, Germany DA - 24.09.2018 KW - Reference materials KW - Proficiency testing KW - COMAR KW - EPTIS KW - RM and PT PY - 2018 AN - OPUS4-46179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Analysis of the operation of accreditation bodies in Europe N2 - The presentation gives an overview of the PMBT-Management tool and ist first application with eight European accreditation bodies. T2 - EUROLAB TCQA Meeting 2018 CY - Berlin, Germany DA - 15.11.2018 KW - Accreditation KW - EFQM Excellence Model KW - Benchmarking PY - 2018 AN - OPUS4-46613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten A1 - Zottl, A. T1 - Dynamische Energieeffizienzprüfung von Wärmepumpen N2 - Die bisher üblichen Verfahren zur Bewertung der Effizienz einer Wärmepumpe durch Labormessungen berücksichtigen kaum transiente Zustände. Können dynamische Bewertungsverfahren im Labor ein realistischeres Verhalten im Feld wiederspiegeln und damit zu sinnvolleren Entscheidungen führen? T2 - Chillventa 2018 CY - Nuremberg, Germany DA - 15.10.2018 KW - Wärmepumpen KW - Energieeffizienz KW - Dynamische Prüfung KW - Methodenentwicklung KW - Energielabel PY - 2018 AN - OPUS4-46343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunderkötter, Jan T1 - Qualitätssicherung im Labor auf Grundlage der ISO/IEC 17025 N2 - Die Begriffe Qualität und Kompetenz im Labor werden beleuchtet und der Inhalt der ISO/IEC 17025 dargestellt und erläutert. T2 - Herbstschule 2018 Qualitätssicherung in der Analytischen Chemie CY - Berlin, Germany DA - 29.10.2018 KW - Qualitätssicherung KW - Akkreditierung KW - Konformitätsbewertung KW - ISO/IEC 17025 PY - 2018 AN - OPUS4-46849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Nicht nur „unter Strom“ - Ressourceneffizienz im Ökodesign N2 - Zusammenfassung des aktuellen Standes der Entwicklungen im Ökodesign mit dem Schwerpunkt auf zukünftige Geltungsbereiche. T2 - Abteilungskolloquium Abetilung S CY - BAM AH, Berlin, Germany DA - 28.06.2018 KW - Ressourceneffizienz KW - Kreislaufwirtschaft KW - Ökdoesign KW - Rechtssetzung PY - 2018 AN - OPUS4-46156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Vries, H. A1 - Jacobs, K. A1 - Egyedi, T. A1 - Eto, M. A1 - Fertig, S. A1 - Kanevskaia, O. A1 - Klintner, L. A1 - Koch, Claudia A1 - Mijatovic, I. A1 - Mirtsch, Mona A1 - Morone, P. A1 - Orviska, M. A1 - Riillo, C. A1 - Scaramuzzino, G. ED - Jacobs, K. T1 - Standardization: Towards an agenda for research N2 - Standardization research is a fairly new and is a still-evolving field of research, with possibly major practical ramifications. This article presents a summary of the authors’ subjective views of the most pressing research topics in the field. These include, among others, standards (e.g. incorporation of ethical issues), the potential impact of standards, the corporate management of standardization and legal issues like Intellectual Property Rights (IPR). In addition, gaps have been identified with a respect to a basic understanding of standardization, suggesting a need for better education in the field. KW - EURAS KW - Impact of standards KW - Intellectual property rights (IPR) KW - Research agenda KW - Standardization research PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-467873 DO - https://doi.org/10.4018/IJSR.2018010104 SN - 2470-8542 VL - 16 IS - 1 SP - 52 EP - 59 PB - IGI Global AN - OPUS4-46787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -