TY - CONF A1 - Hein, Sebastian T1 - Ansätze und Herausforderungen für das QM-System einer Ressortforschungseinrichtung N2 - Die BAM betreibt ein QM-System, das stark an der DIN EN ISO/IEC 17025 orientiert ist und welches in den meisten Fachabteilungen durch Akkreditierungen untersetzt wird. Mit der Zunahme der Forschungsaktivitäten in den letzten Jahren ist der DFG-Kodex zur Sicherstellung der Guten wissenschaftlichen Praxis deutlicher in den Fokus des Qualitätsmanagements gerückt. Der Vortrag zeigt auf, welche QM-Anforderungen an die Leistungen der BAM gestellt werden und mit welchen Instrumenten sie diese umsetzt, so dass Gute wissenschaftliche Praxis und Akkreditierungen gut harmonieren können. T2 - QM-Seminar; Robert-Koch-Institut CY - Berlin, Germany DA - 21.01.2020 KW - Qualitätsmanagement KW - Gute wissenschaftliche Praxis PY - 2020 AN - OPUS4-50311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Riedel, Jens A1 - Vogl, Jochen A1 - Panne, Ulrich A1 - Abad Andrade, Carlos Enrique T1 - Atomic absorption spectrometry with machine learning as a tool for lithium isotope analysis N2 - The general interest in the implementation of renewable energies, particularly in the development of lithium-ion batteries, makes lithium a key element to be analyzed. We are working to develop this tool to determine if the isotopic effect of lithium has an impact on battery aging. T2 - SALSA Konferenz CY - Berlin, Germany DA - 16.09.2021 KW - Atomic absorption spectrometry KW - Battery KW - Machine learning KW - Lithium KW - Isotope PY - 2021 AN - OPUS4-53693 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knieschewski, Arno T1 - Cheaper compliance verification for the energy label of tumble dryers N2 - The energy label is a tool that informs the consumer about the energy consumption of certain appliances. The tumble dryer is one of these appliances that were considered relevant for receiving an energy label in the European Union. All classes and values on the energy label are stated by the manufacturers. In order to guarantee that the manufacturers do not cheat and appliances are labeled correctly, the stated values are checked by the market surveillance of each country in compliance verification tests. However, in the case of tumble dryers these compliance verification tests are very expensive and can only be realized for a small sample size out of models which are available on the market. The fewer compliance verification tests are carried out, the higher is the chance that there are incorrectly labeled appliances on the market. Therefore, a modification of the test standard for tumble dryers has been analyzed which would reduce the costs of a performance test by at least 11 %. T2 - WSED 2018 - World Sustainable Energy Days CY - Wels, Austria DA - 28.02.2018 KW - Tumble dryer KW - Energy label KW - Test standard PY - 2018 AN - OPUS4-47473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bischoff, Tristan T1 - Heat storage testing method with realistic operating conditions N2 - Development of a new testing method for comparing efficient stratified heat storages. T2 - World sustainable energy days CY - Online meeting DA - 21.06.2021 KW - Heat storage KW - Stratification KW - Testing Methods KW - Exergy KW - Load profile PY - 2021 AN - OPUS4-52791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Abad Andrade, Carlos Enrique A1 - Riedel, Jens A1 - Vogl, Jochen A1 - Panne, Ulrich T1 - Lithium isotope analysis combining atomic absorption spectroscopy and machine learning N2 - In this poster for the SCIX Conference, we apply an analytical procedure based on the monitoring of the lithium isotope through the partially resolved isotope shift in the electronic transition 22P<-22S around wavelength 670.80 nm using high-resolution continuum source atomic absorption spectrometer (HR-CS-AAS) in combination with machine learning (ML) for the determination of Li Isotope ratio analysis. T2 - SCIX Conference CY - Providence, RI, USA DA - 26.09.2021 KW - Lithium isotope KW - High-resolution continuum source atomic absorption spectrometer KW - Machine learning PY - 2021 AN - OPUS4-53686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Blind, K. T1 - Testbeds for standardization in the IIoT N2 - The poster presents our research findings on the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - EU BRIDGIT2 Project - National Event Bridging the Innovation Gap Between Research & Market Impact using Standardisation CY - Dublin, Ireland DA - 11.09.2019 KW - Normen KW - Normung KW - Standards KW - Standardization KW - Industrie 4.0 KW - Testumgebung KW - IIoT KW - Testbed PY - 2019 AN - OPUS4-50086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Blind, K. T1 - Testbeds for standardization in the IIoT N2 - The poster presents our research findings on the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - BRIDGIT2 conference at NSAI CY - Dublin, Irland DA - 11.09.2019 KW - IIoT KW - Normen KW - Industrie 4.0 KW - Standards KW - Normung KW - Standardization KW - Testbed PY - 2019 AN - OPUS4-48937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -