TY - CONF A1 - Meng, Xiangmeng T1 - A statistical assessment of the laser energy absorption and keyhole stability in high-power laser welding N2 - The behavior of the weld pool in high-power laser beam welding is significantly influenced by laser absorption and keyhole stability, which determines the final weld qualities. However, their dynamic features and multi-coupled interactions make in-depth analyses difficult. This study addresses the challenges by conducting a thorough statistical evaluation of the effects of welding parameters on laser absorption and keyhole fluctuations, using experimental investigations and a well-validated numerical model. From a statistical aspect, the laser energy distribution and the keyhole collapse, commonly considered to be highly time-varying, show clear regularities. Three distinct regions of the time-averaged energy distribution are identified. The possibility of the keyhole collapse positions obeys a universal normal distribution. The statistical data show greater potential in revealing some well-known, industry-related but unclearly explained findings, such as the saturation of the weld penetration with increasing heat input and the physical basis of the contributions of different welding parameters in the porosity reduction. T2 - 78th IIW Annual Assembly CY - Genoa, Italy DA - 22.06.2025 KW - Laser beam welding KW - Energy absorption KW - Keyhole stability PY - 2025 AN - OPUS4-64810 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chaurasia, Prashant Kumar A1 - Fabry, Çağtay A1 - Pittner, Andreas A1 - De, Amitava A1 - Rethmeier, Michael T1 - Automated in situ monitoring and analysis of process signatures and build profiles during wire arc directed energy deposition N2 - Wire arc directed energy deposition (DED-Arc) is an emerging metal additive manufacturing process to build near-net shaped metallic parts in a layer-by-layer with minimal material wastage. Automated in situ monitoring and fast-responsive analyses of process signatures and deposit profiles during DED-Arc are in ever demand to print dimensionally consistent parts and reduce post-deposition machining. A comprehensive experimental investigation is presented here involving real-time synchronous measurement of arc current, voltage, and the deposit profile using a novel multi-sensor monitoring framework integrated with the DED-Arc set-up. The recorded current–voltage transients are used to estimate the time-averaged arc power, and energy input in real time for an insight of the influence of wire feed rate and printing travel speed on the deposit characteristics. A unique attempt is made to represent the geometric profiles of the single-track deposits in a generalized mathematical form corresponding to a segmented ellipse, which has exhibited the minimum root-mean-square error of 0.03 mm. The dimensional inconsistency of multi-track deposits is evaluated quantitatively in terms of waviness using build profile monitoring and automated estimation, which is found to increase with an increase in step-over ratio and energy input. For the multi-track mild steel deposits, the suitable range of step-over ratio for the minimum surface waviness is observed to lie between 0.6 and 0.65. Collectively, the proposed framework of synchronized process monitoring and real-time analysis provides a pathway to achieve dimensionally consistent and defect-free parts, and highlights the potential for closed-loop control systems for a wider industrial application of DED-Arc. KW - Additive Manufacturing KW - Arc welding KW - DED-arc KW - Real-time monitoring and control KW - Dimensional inconsistency PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642029 DO - https://doi.org/10.1007/s40964-025-01333-9 SN - 2363-9512 SP - 1 EP - 20 PB - Springer Science and Business Media LLC CY - Cham AN - OPUS4-64202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas T1 - Life cycle assessment of fusion welding processes methodology and implementation N2 - Fusion welding processes in manufacturing are resource-intensive, creating a significant opportunity to reduce their environmental impact. While the environmental effects of these processes are qualitatively understood, quantitatively assessing the key influencing parameters remains challenging. This study presents a welding-specific methodology leveraging life cycle assessment (LCA) to quantitatively measure the environmental footprint of fusion welding technologies. The proposed approach identifies and evaluates the critical parameters that influence the environmental performance of various welding methods, including conventional joint welding and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. By incorporating real-time resource consumption data, the methodology provides a novel framework for directly linking process parameters to environmental impacts. This research offers a precise and quantitative analysis of the ecological effects of welding processes, supporting their optimization and promoting the development of more sustainable manufacturing practices. T2 - European welding association - executive meeting 2 CY - Milano, Italy DA - 03.12.2024 KW - Life cycle assessment KW - Fusion welding KW - Sensitivity study PY - 2024 AN - OPUS4-62018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas T1 - Automated arc welding and quality assessment of large scale support structures for offshore wind turbines N2 - Offshore wind energy is a key driver in achieving a carbon dioxide-free industrial sector over the coming decades. However, the foundation systems for offshore wind plants significantly influence the overall installation process, alongside regulatory challenges. The adoption of lightweight design principles in steel construction, such as the use of dissolved load-bearing structures known as jacket foundations, holds substantial promise for reducing resource use, particularly the required volume of steel. This presentation focuses on the complete digitalization of the welding manufacturing and testing processes, enabling fully automated production and quality assessment of tubular nodes, which are critical components of jacket foundation structures. Additionally, the study examines the correlation between seam geometry and fatigue strength through numerical simulations inspired by bionic design principles. It demonstrates that tubular nodes can be welded entirely automatically while accommodating geometric tolerances. Moreover, seam geometries can be precisely manufactured according to the numerical models, significantly enhancing the service life of the structures. Finally, the resource efficiency and reduction in carbon dioxide emissions resulting from these advancements are analyzed through a life-cycle assessment, highlighting the environmental benefits of this approach. T2 - 77th IIW Annual Assembly and International Conference, C-XII: Arc Welding Processes and Production Systems CY - Rhodos, Greece DA - 07.07.2024 KW - Offshore wind KW - Support structures KW - Light-weight construction KW - Automated arc welding PY - 2024 AN - OPUS4-62016 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chaurasia, Prashant Kumar T1 - Automated In-situ Monitoring and Analysis of Process Signatures and Build Profile During Arc-based Directed Energy Deposition N2 - Automated in-situ synchronous monitoring and analysis of key process signatures during arc-based directed energy deposition (DED) process are the key challenges for layer-by-layer printing of large-scale parts. An attempt is presented here for real-time monitoring of process transients, deposit profile, and quantitative assessment of arc power, energy input and its influence on deposit dimensions. The workflow including setup, job generation and data analysis is fully automated in Python to allow large scale experiments with fast analysis results. T2 - 2nd Online Young Welding Professional International Conference CY - Online meeting DA - 06.02.2025 KW - Additive Manufacturing KW - Arc welding KW - DED-arc KW - Monitoring KW - Deposition profile PY - 2025 AN - OPUS4-62663 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hälsig, André A1 - Eßbach, Tim-Bernd A1 - Scharf-Wildenhain, Ronny A1 - Altobelli, Martin Gabriel A1 - Phadnis, Prathamesh Jayant A1 - Hensel, Jonas A1 - Fabry, Çağtay A1 - Pittner, Andreas A1 - Armansyah, T1 - Qualitätssicherung beim Lichtbogenschweißen N2 - Der fortschreitende Trend der Automatisierung und Dokumentation sowie die wirtschaftliche und technische Optimierung von Fügeaufgaben machen es notwendig, Sensoren zielführend in bestehende und vorhandene Anlagentechnik zu integrieren. Jedoch bietet die reine Datenerfassung alleine nur einen geringen Mehrwert. Erst durch eine optimierte Datenspeicherung, eine intelligente sowie automatische Datenauswertung und -bewertung entsteht ein echter Nutzen für den industriellen Anwender. Zur Qualifizierung einer standardisierbaren Herangehensweise der Qualitätssicherung beim Lichtbogenschweißen wurden mit einer nationalen Arbeitsgruppe bestehende Unstetigkeiten der Qualitätsbeeinflussung geschweißter Bauteile aufgeschlüsselt und definiert. Parallel dazu wurde ein automatisiertes Schweißsystem mit hochgenauer Messtechnik (u. a. Stromstärke, Spannung, Drahtvorschub, Thermokamera, Geometriescanner usw.) ausgerüstet und validiert. Hierfür wurde die Open-Source-Technologie WelDX der BAM genutzt. Anschließend wurden bewusst fehlerhaft geschweißte Nähte im Vergleich zu fehlerfreien Referenzschweißungen hergestellt, Messdaten erfasst und analysiert. Im Rahmen dieses Beitrags werden erste Ergebnisse und Erkenntnisse in Bezug auf die Detektion und Bewertung von Unstetigkeiten beim Lichtbogenschweißen dargestellt. Dabei wurde deutlich, dass alternative Darstellungs- und Analysemethoden wie die Anwendung der Mahalanobis-Distanz im Stromstärke-Spannungs-Diagramm eine eindeutigere Korrelation zwischen Unstetigkeiten und Prozesssignalen ermöglichen. T2 - DVS CONGRESS 2025 CY - Essen, Germany DA - 16.09.2025 KW - Lichtbogenschweißen KW - Qualitätssicherung KW - Forschungsdatenmanagement KW - WelDX PY - 2025 SN - 978-3-96144-298-0 VL - 401 SP - 76 EP - 85 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-64565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fabry, Çağtay T1 - WelDX Projektvorstellung N2 - Der Vortrag gibt eine Übersicht über die fortlaufende Entwicklung des WelDX Projektes an der BAM. Die Notwendigkeit des Datenaustausches für die deutsche Forschungslandschaft im Bereich des Lichtbogenschweißens wird motiviert und die wesentlichen Funktionen der weldx Python-Bibliothek anhand von Forschungsbeispielen dargestellt. T2 - Sitzung des DVS Fachausschuss FA03 - Lichtbogenschweißen CY - Ilmenau, Germany DA - 13.05.2025 KW - Forschungsdatenmanagement KW - Lichtbogenschweißen KW - Digitalisierung KW - Weldx PY - 2025 AN - OPUS4-63278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fabry, Çağtay T1 - Welding Process Data Management - openBIS workflows and lab integration N2 - Arc welding processes are an important manufacturing technology applied to a wide range of critical materials and components such as offshore constructions, pressure vessels and additive manufacturing. Data management for experimental arc welding research faces the challenge of constantly changing experimental setups, incorporating a wide range of custom sensor integrations. Measurements include timeseries process and temperature recordings, 3D-geometry data and video recordings of the process from a sub-millisecond scale to multiple hour-long experiments. In addition, various manual pre-processing steps of the workpieces need to be considered to track the complete manufacturing process and its analysis – from raw materials to final dataset and publication. As a unified RDM system, the BAM Data Store offers the capability to incorporate all steps – albeit not without its own challenges. The talk gives an overview of the different workflows and processing steps along the welding experiments together with their integration into the BAM Data Store. Current solutions and ongoing integration work is explained and discussed. This includes the direct integration and upload of automated processing steps into the Data Store from different machines and sensors using custom Python APIs. Ultimately the complete processing chain across multiple internal steps should be represented in the Data Store. T2 - openBIS user group meeting 2025 CY - Berlin, Germany DA - 22.09.2025 KW - Data Store KW - Openbis KW - Research Data Management KW - Research data KW - Digitalisation PY - 2025 AN - OPUS4-64203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas A1 - Brauser, Stephan T1 - Herausforderungen und Lösungen für das robotergestützte Schweissen von Stahlrohrknoten für Offshore Wind Jackets N2 - Die Offshore-Windenergie spielt eine wichtige Rolle beim angestrebten Übergang zu einer emissionsfreien Industrie während der nächsten Jahrzehnte. Allerdings beeinflusst die Gründung der Offshore-Windanlagen den gesamten Installationsprozess. Die Anwendung von Leichtbauprinzipien im Stahlbau, wie beispielsweise die Verwendung von aufgelösten Tragstrukturen, sogenannten Jacket-Fundamenten, bietet ein großes Potenzial zur Reduzierung des Ressourcenverbrauchs, insbesondere im Hinblick auf die benötigte Stahlmenge. Der Vortrag befasst sich daher mit der vollständigen Digitalisierung der schweißtechnischen Fertigungs- und Prüfkette. Ziel ist es, eine vollautomatische Fertigung sowie Qualitätsprüfung von Rohrknoten zu ermöglichen. Diese stellen ein Schlüsselelement von Jacket-Fundamenten dar. Des Weiteren wird der Zusammenhang zwischen der Geometrie der Schweißnaht und der resultierenden Ermüdungsfestigkeit durch numerische Methoden unter Einbeziehung bionischer Prinzipien bewertet. Es wird gezeigt, dass rohrförmige Knoten unter Berücksichtigung von Geometrietoleranzen vollautomatisch geschweißt werden können. Die Schweißnahtform konnte gemäß den numerischen Modellen hergestellt werden, was ein großes Potenzial für eine verlängerte Lebensdauer bietet. Anschließend erfolgt eine Bewertung der Verbesserungen bei der Ressourceneffizienz und der Verringerung des CO2-Fußabdrucks durch ein Life Cycle Assessment. T2 - Schweissen in der maritimen Technik und im Ingenieurbau CY - Hamburg, Germany DA - 24.05.2023 KW - Offshore Windenergie KW - Fertigung KW - Leichtbau KW - Aufgelöste Tragstrukturen KW - Schweißen KW - Ermüdungsfestigkeit PY - 2023 AN - OPUS4-59498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pittner, Andreas A1 - Winterkorn, René T1 - Life cycle assessment of fusion welding processes considering upstream and downstream process steps N2 - In manufacturing, fusion welding processes consume significant resources, presenting a significant opportunity for reducing environmental impact. Although there is a qualitative understanding of the environmental implications of these processes, a quantitative assessment of key parameters remains complex. This study introduces a welding-specific methodology that employs life cycle assessment (LCA) to quantitatively evaluate the environmental footprint of fusion welding technologies. Our approach identifies and analyses the principal parameters affecting the environmental performance of various welding techniques, including traditional joint welding and additive manufacturing via the Direct Energy Deposition-Arc (DED-Arc) process. Real-time resource usage data is integrated to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact. This facilitates the advancement of sustainable manufacturing practices. T2 - Joining Smart Technologies - International Automotive Conference CY - Wels, Austria DA - 10.05.2023 KW - Life Cycle Assessment KW - Arc welding KW - Additive manufacturing KW - DED-Arc PY - 2023 AN - OPUS4-59494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Artinov, Antoni T1 - A General Analytical Solution for Two-Dimensional Columnar Crystal Growth during Laser Beam Welding of Thin Steel Sheets N2 - The main solidification parameters, namely the crystal axis, the growth rate, and the cross-sectional area of the columnar crystal control the primary microstructure and thus the final weld seam properties. Limited understanding of solidification parameters due to complexities in experimental and theoretical weld pool boundary determination and its mathematical description. Application of local Lamé curves for efficient weld pool boundary reconstruction Derivation of general analytical solutions for the main solidification parameters of a two-dimensional columnar crystal growth during laser beam welding of thin steel sheets. The Lamé curves approximation technique was successfully applied for the reconstruction of the rear part of the two-dimensional steady-state weld pool boundary. General analytical expressions for the main solidification parameters, namely the crystal axis, the growth rate and the cross-sectional area of the crystal were derived. The derived expressions and herewith obtained results were verified and validated by comparing them to known theoretical solutions and experimental measurements. Dimensionless analysis of the influence of the size and shape of the rear weld pool boundary on the solidification parameters was provided. The derived general solutions and the analysis provided allow for critical welding parameters to be estimated and adapted accordingly to improve the welding process. T2 - 3rd International Conference on Advanced Joining Processes CY - Braga, Portugal DA - 19.10.2023 KW - Laser beam welding KW - Analytical solution KW - Columnar crystal growth PY - 2023 AN - OPUS4-59174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - El-Sari, B. A1 - Biegler, M. A1 - Gook, S. A1 - Rethmeier, Michael T1 - KI zur Prozessüberwachung im Unterpulverschweißen N2 - Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren. KW - Unterpulverschweißen KW - Künstliche Intelligenz KW - Prozessüberwachung KW - Körperschall PY - 2024 SP - 1 EP - 2 AN - OPUS4-59483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -