TY - CONF A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Aufschluss, Trennung und Recycling von ressourcenrelevanten Metallen aus Rückständen thermischer Prozesse mit innovativen Verfahren T2 - Jahrestreffen der Fachgruppe Abfallbehandlung und Wertstoffrückgewinnung CY - Frankfurt am Main, Germany DA - 2013-02-20 PY - 2013 AN - OPUS4-27753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, T. ED - Meyers, R.A. T1 - Sustainable remediation methods for metals and radionuclides N2 - Glossary Biomineralization A process by which living organisms produce minerals. - Chernobyl Ukrainian city site of the largest nuclear power plant accident in history. - Cut-off-wall Underground structure designed to prevent the flow of water. - DART Deep aquifer remediation tool. - Diffusion Movement of ions and molecules from places of higher concentration to places of lower concentration. - Electrochemical remediation Remediation technologies comprising electrochemical transport and transformation methods. - Electrokinetic screens Structures used to prevent radionuclides from diffusing from the polluted area into the environment. - Electromigration Transport of charged ions or ion complexes in solution. - Electroosmosis Movement of liquid relative to a charged stationary surface, - Electrophoresis Movement of charged particles relative to a stationary fluid. - Enhanced electrochemical remediation Use of pH control and additives to improve removal efficiency. - EURT East Urals Radioactive Trail area contaminated due to a nuclear accident. - Natural attenuation (NA) Remediation relying entirely on natural processes. - Permeable reactive barriers Passive in situ treatment zones of reactive material that degrades or immobilizes contaminants as groundwater flows through it. - Phytoremediation Soil remediation using living plants and their associated microorganisms. - Radionuclide or radioisotope An atom with an unstable nucleus whose excess energy is available to be imparted to a newly-created radiation particle within the nucleus or to an atomic electron. - Total material requirement (TMR) Sum of domestic and imported primary natural resources and their hidden flows. KW - Groundwater remediation KW - Radionuclides PY - 2013 SN - 978-1-4419-0852-0 U6 - http://dx.doi.org/10.1007/SpringerReference_226449 SP - 1 EP - 36 PB - Springer CY - Berlin Heidelberg AN - OPUS4-28517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg ED - Rüppel, U. T1 - Kreislauf von Ressourcen N2 - Die Materialflüsse in Industriegesellschaften sind von enormer Größe. Im Jahr 2008 betrug der direkte Materialeinsatz (direct material input, DMI) (Czichos et al., 2008) in Deutschland 1687 Millionen Tonnen (Daten von destatis, 2010). Dazu gehören Energieträger (Kohle, Öl, Gas), Erze, Baumaterialien, Industrieminerale und Biomasse. Knapp 36 % davon (605 Millionen t) werden importiert. Mit zu berücksichtigen sind bei den Materialflüssen auch die nicht verwerteten Rohstoffentnahmen (z.B. Abraum im Bergbau, Bodenaushub, Bergematerial, Verbleib von Holzabfallen im Wald), die sich für die inländische Rohstoflentnahme auf 2229 Millionen Tonnen beliefen. Die nicht verwerteten Rohstoffentnahmen bei den Importen sind mehr als der Faktor 4 höher (2543 Millionen t) (Buyny et al., 2009). Auf der Outputseite geht von diesen riesigen Mengen der größere Anteil in den Bestand (net addition to stock, 637 Millionen t), der nächst größere Anteil in den Export (388 Mt). Immerhin 256 Millionen Tonnen werden durch dissipative Nutzung in der Umwelt verteilt. Die Bilanz geht auf, wenn man Gase auf der Inputseite und Emissionen in die Atmosphäre auf der Outputseite (Verbrennung von fossilen Rohstoffen zu CO2 und Wasser) berücksichtigt. An diesen Zahlen erkennt man, dass Ressourcen nur in beschränkten Maß im Kreislauf geführt werden, sonst wäre der Zuwachs zum urbanen Lager nicht so groß. T2 - 2. Darmstädter Ingenieurkongress Bau und Umwelt CY - Darmstadt, Germany DA - 12.03.2013 KW - Ressourcen KW - Ressourcenproduktivität KW - Recycling-Baustoffe PY - 2013 SN - 978-3-8440-1747-2 SN - 0945-067X SP - 697 EP - 700 PB - Shaker Verlag GmbH AN - OPUS4-27927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Holm, Olaf A1 - Berger, Wolfgang T1 - Resource recovery from urban stock, the example of cadmium and tellurium from thin film module recycling N2 - Raw material supply is essential for all industrial activities. The use of secondary raw material gains more importance since ore grade in primary production is decreasing. Meanwhile urban stock contains considerable amounts of various elements. Photovoltaic (PV) generating systems are part of the urban stock and recycling technologies for PV thin film modules with CdTe as semiconductor are needed because cadmium could cause hazardous environmental impact and tellurium is a scarce element where future supply might be constrained. The paper describes a sequence of mechanical processing techniques for end-of-life PV thin film modules consisting of sandblasting and flotation. Separation of the semiconductor material from the glass surface was possible, however, enrichment and yield of valuables in the flotation step were non-satisfying. Nevertheless, recovery of valuable metals from urban stock is a viable method for the extension of the availability of limited natural resources. KW - Flotation KW - Cadmium KW - Tellurium KW - Thin film technology KW - Sand blasting PY - 2013 U6 - http://dx.doi.org/10.1016/j.wasman.2012.12.025 SN - 0956-053X VL - 33 IS - 4 SP - 942 EP - 947 PB - Pergamon Press CY - New York, NY AN - OPUS4-29312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Recovery of metals from waste, an example for the resource cycle N2 - Bottom ash from municipal solid waste incineration (MSWI) consists of elemental metals in considerable amounts. The fine fraction < 4 mm additionally contains chemically bound metals (oxides, carbonates, silicates). Separation prospects with techniques as in ore processing (flotation, density separation, bioleaching, hydrothermal solution) are discussed. During alteration after wet extraction mineral material with hydraulic properties form coatings on almost all particles of the bottom ash and complicate separation procedures. In addition bottom ash from MSWI is a heterogeneous material. For sufficient enrichment different concerted treatment steps seemed to be essential associated with an uncertainty of economic viability. The utilisation of metal compounds present in bottom ash as secondary raw material depends on the energy- and resource-efficiency of the enrichment processes. Therefore energy and material flow considerations are presented. T2 - WRF 2013 - World Resources Forum conference CY - Davos, Switzerland DA - 06.10.2013 KW - Recyclable material KW - Recycling technology KW - Environmental technology KW - Waste management PY - 2013 UR - http://www.atr.bam.de/de/medien/2013_simon_wrf.pdf SP - 1 EP - 6 AN - OPUS4-32011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Rostasche - Durch Aufschluss, Trennung und Rückgewinnung von Metallen aus Rückständen thermischer Prozesse kann die Metallausbeute erhöht werden N2 - In den Rückständen thermischer Verfahren sind als Folge des Verbrennungsprozesses Metalle sowohl in elementarer wie auch in chemisch gebundener Form enthalten. Früher wurde Eisenschrott vor allem deshalb mit Magneten abgetrennt, weil sonst die Verwertung als Baustoff erschwert war. Nichteisen-Metalle – bei Rostasche aus einer Müllverbrennungsanlage (MVA) sind dies hauptsächlich Kupfer und Aluminium – können mit der Wirbelstromtechnik abgetrennt werden. Auf diese Weise sinken auch die Gehalte an umweltrelevanten Schwermetallen. Allerdings werden die kleinen Korngrößen und die chemisch gebundenen Metallen (etwa Oxide oder Carbonate) bisher in der Aufbereitung nicht erfasst. Im vorliegenden Beitrag werden die verfahrenstechnische Potenziale aufgezeigt, mit denen die Metallausbeute erhöht werden kann. KW - Rostasche KW - Wirbelstromabscheidung KW - Flotation PY - 2013 SN - 1868-9531 VL - 26 IS - 3 SP - 31 EP - 37 PB - Rhombos-Verlag CY - Berlin AN - OPUS4-29321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Aufschluss, Trennung und Rückgewinnung von Metallen aus Rückständen thermischer Prozesse - Verdoppelung der Metallausbeute aus MVA-Rostasche N2 - In den Rückständen thermischer Verfahren sind bedingt durch den Verbrennungsprozess Metalle sowohl in elementarer wie auch in chemisch gebundener Form enthalten. Früher wurde Eisenschrott vor allem deshalb mit Magneten abgetrennt, weil sonst die Verwertung als Baustoff erschwert war. Nichteisen-Metalle, bei Rostasche aus einer Müllverbrennungsanlage (MVA) sind dies hauptsächlich Kupfer und Aluminium, können mit der Wirbelstromtechnik abgetrennt werden. Auf diese Weise sinken auch die Gehalte an umweltrelevanten Schwermetallen. Allerdings werden die kleinen Korngrößen und die chemische gebundenen Metallen (z.B. Oxide oder Carbonate) bisher in der Aufbereitung nicht erfasst. Der Beitrag befasst sich mit den verfahrenstechnischen Potenzialen zur Erhöhung der Metallausbeute. KW - Rostasche KW - Aufbereitung KW - Flotation KW - Dichtesortierung KW - Nichteisenmetalle PY - 2013 SN - 978-3-935317-99-3 SP - 297 EP - 310 PB - TK-Verl. AN - OPUS4-29168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Recovery of metals from waste, an example for the resource cycle T2 - ICEM11, 11th International Conference on Ecomaterials CY - Hanoi, Vietnam DA - 2013-11-11 PY - 2013 AN - OPUS4-32095 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf A1 - Simon, Franz-Georg T1 - Recovery of copper from small grain sizes of municipal solid waste incineration bottom ash by means of density separation N2 - Small grain sizes of municipal solid waste incineration (MSWI) bottom ash (BA) contain elemental and chemically bonded metals in appreciable amounts, especially copper. As different copper species have in general a higher density compared to the prevalent minerals, processes for density separation seemed to be favorable for the recovery of copper. Investigations with a centrifugal classifier were therefore carried out with BA from MWSI which have been used for a few years as the covering material for a landfill. The results show an appreciable enrichment of the precious copper. The concentrates contained up to 60 mg/kg copper in the dry weight (DW) (in general about 30 – 40 mg/kg DW) with enrichment factors of around 20 and a copper recovery of up to 50 % (in general around 20 %). A test series in order to evaluate the potential benefit for sequential processing illustrate the low efficiency for a further processing of the tailings. T2 - SUM 2014 - 2nd Symposium on Urban Mining CY - Bergamo, Italy DA - 19.052014 KW - Municipal solid waste incineration (MSWI) KW - Density separation KW - Bottom ash (BA) KW - Copper PY - 2014 SN - 9788862650311 SP - 1 EP - 7 PB - CISA Publisher CY - Padova, Italy AN - OPUS4-37308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Recovery of non-ferrous metals from MSW IBA by means of mechanical processes T2 - International VDI Conference Metals and Minerals Recovery from IBA CY - Düsseldorf, Germany DA - 2014-10-14 PY - 2014 AN - OPUS4-35230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -