TY - CONF A1 - Nordholt, Niclas T1 - Bacterial resistance evolution on antimicrobial surfaces: Mechanistic insights from a standardizable method N2 - Introduction: Antimicrobial surfaces and coatings (AMCs) are important to prevent the spread of pathogens, especially in hygiene-sensitive areas. However, the evolution and selection of bacterial resistance to AMCs may threaten their efficacy in the long term. In addition, resistance evolution to AMCs may pose the risk for the development of cross-resistance to antibiotics. The assessment of unacceptable resistance risks during the authorization of AMCs is hampered by the lack of standardized test methods that quantify the adaptability of exposed bacteria to AMCs. Objectives: • To develop a standardizable method to determine resistance evolution of bacteria on AMCs (ALEE-AMC) • To assess performance and robustness of ALEE-AMC in a ring trial • To uncover the mechanisms underlying evolution of resistance to a metallic copper AMC • To use ALEE-AMC to assess the evolution of resistance on a novel, nano-particle-based AMC Methods: ALEE-AMC was developed based on an international standard to determine the efficacy of antimicrobial surfaces (ISO 22196). In the ALEE-AMC test, adaptive laboratory evolution is conducted by repeated cycles of AMC exposure and re-growth of surviving cells, selecting for increased survival, followed by isolation of evolved clones. Metallic copper was used as a reference AMC and Escherichia coli as a model microorganism in the ring trial. Evolved E. coli populations from the ring trial partners were subjected to phenotypic (antimicrobial susceptibility testing, ISO 22196) and genotypic (whole genome sequencing) characterization. ALEE-AMC will be used to assess the evolution of resistance on a novel, nano-particle-based AMC currently under development. Findings: The results of the ALEE-AMC ring trial show that repeated exposure to a metallic copper AMC can reproducibly select for reduced copper susceptibility in individual evolutionary lineages across ring trial participants. However, failure to adapt in individual lineages was also observed in all trials. Isolated evolved E. coli clones exhibited increased survival upon exposure to copper surfaces. Adaptation to copper did not induce cross-resistance to antibiotics because the antibiotic susceptibility of copper-adapted clones did not increase above the clinical breakpoint. Whole genome sequencing of the evolved E. coli revealed a high diversity of mutations, including mutations in genes involved in survival to antibiotics. These results indicate the existence of multiple, underexplored evolutionary pathways towards increased survival of antimicrobial copper surfaces. Conclusion: ALEE-AMC offers a standardizable platform to assess the risk of resistance development towards novel and existing AMCs, including nano-particle-based and metallic copper AMCs. Specifically, using ALEE-AMC provided insights into evolvable survival mechanisms to copper AMCs and its consequences for antimicrobial resistance. T2 - FEMS MICRO 2025 CY - Mailand, Italy DA - 14.07.2025 KW - Biocides KW - Antimicrobial surfaces KW - Biocide resistance KW - Standardization KW - ISO 22196 KW - Evolution PY - 2025 AN - OPUS4-63837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kupke, Johannes A1 - Brombach, Julian A1 - Fang, Yuwen A1 - Wolf, Silver A. A1 - Thrukonda, Lakshmipriya A1 - Ghazisaeedi, Fereshteh A1 - Kuropka, Benno A1 - Hanke, Dennis A1 - Semmler, Torsten A1 - Nordholt, Niclas A1 - Schreiber, Frank A1 - Tedin, Karsten A1 - Lübke-Becker, Antina A1 - Steiner, Ulrich K. A1 - Fulde, Marcus T1 - Heteroresistance in Enterobacter cloacae complex caused by variation in transient gene amplification events N2 - Heteroresistance (HR) in bacteria describes a subpopulational phenomenon of antibiotic resistant cells of a generally susceptible population. Here, we investigated the molecular mechanisms and phenotypic characteristics underlying HR to ceftazidime (CAZ) in a clinical Enterobacter cloacae complex strain (ECC). We identified a plasmid-borne gene duplication-amplification (GDA) event of a region harbouring an ampC gene encoding a β-lactamase bla DHA-1 as the key determinant of HR. Individual colonies exhibited variations in the copy number of the genes resulting in resistance level variation which correlated with growth onset (lag times) and growth rates in the presence of CAZ. GDA copy number heterogeneity occurred within single resistant colonies, demonstrating heterogeneity of GDA on the single-cell level. The interdependence between GDA, lag time and antibiotic treatment and the strong plasticity underlying HR underlines the high risk for misdetection of antimicrobial HR and subsequent treatment failure. KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-627057 DO - https://doi.org/10.1038/s44259-025-00082-7 VL - 3 IS - 1 SP - 1 EP - 14 PB - Springer AN - OPUS4-62705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lee, Mihyun A1 - Wiesli, Luzia A1 - Schreiber, Frank A1 - Ivask, Angela Ivask A1 - Ren, Qun T1 - Quantitative Assessment of Microbial Transmission onto Environmental Surfaces Using Thermoresponsive Gelatin Hydrogels as a Finger Mimetic under In Situ-Mimicking Conditions N2 - Surface-mediated transmission of pathogens plays a key role in healthcare-associated infections. However, proper techniques for its quantitative analysis are lacking, making it challenging to develop novel antimicrobial and anti-fouling surfaces to reduce pathogen spread via environmental surfaces. This study demonstrates a gelatin hydrogel-based touch transfer test, the HydroTouch test, to evaluate pathogen transmission on high-touch surfaces under semi-dry conditions. The HydroTouch test employs gelatin as a finger mimetic, facilitating testing with pathogenic bacteria under controlled conditions. The thermoresponsive sol–gel transition of gelatin allows easy recovery and quantification of bacteria before and after testing. The HydroTouch test demonstrates that methicillin-resistant Staphylococcus aureus has a high transmission efficiency of ≈16% onto stainless steel, compared to <3% for Escherichia coli or Pseudomonas aeruginosa. Polyurethane surfaces exhibit strong resistance to bacterial contamination with a transmission efficiency of ≈0.6%, while polytetrafluoroethylene shows a transmission efficiency approximately four times higher than polyurethane. Additionally, quaternary ammonium-based antimicrobial coatings reduce the transmission efficiency of live bacteria on stainless steel to ≈4% of the original level. The HydroTouch test provides a reliable method for assessing pathogen transmission on various surfaces under semi-dry settings, supporting the development of effective antimicrobial, anti-transmission coatings to reduce healthcare-associated infections. KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-624566 DO - https://doi.org/10.1002/adhm.202403790 SN - 2192-2659 SP - 1 EP - 10 PB - Wiley VHC-Verlag AN - OPUS4-62456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - Phenotypic heterogeneity in bacterial lag times and antibiotic tolerance induced by the disinfectant glutaraldehydePhenotypic heterogeneity in bacterial lag times and antibiotic tolerance induced by the disinfectant glutaraldehyde N2 - Phenotypic heterogeneity in clonal bacterial populations can be considered a preliminary stage of functional differentiation, which may increase population fitness in fluctuating environments. Here, we investigated how transient exposure of clonal bacterial populations to residual amounts of a commonly used disinfectant, glutaraldehyde (GTA), induces phenotypic heterogeneity, ensuring survival of the population upon sudden challenge with high doses of antibiotics. Using the ScanLag system, we found that exposure to GTA resulted in wide lag-time distributions across different bacterial isolates of E. coli, S. aureus, and P. aeruginosa. Importantly, this was associated with elevated levels of survival (i.e. tolerance) towards lethal doses of antibiotics. As revealed by RNAseq in E. coli, GTA exposure caused global transcriptome remodeling, with more than 1200 differentially expressed genes of diverse biological functions. Several of these genes that were not previously associated with antibiotic tolerance or persistence induced, when overexpressed alone, antibiotic tolerance without showing a lag phenotype. This suggests that exposure to GTA induces unspecific, lag-dependent and specific, lag-independent tolerance to antibiotics in clonal bacterial populations. These findings have implications for 1.) settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and 2.) for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments because of the trade-off that arises from exiting lag and resuming growth as fast as possible and maintaining antibiotic tolerance. This trade-off may be weakened by phenotypically heterogeneous clonal populations as induced by GTA. T2 - FAST REAL Project Meeting Tartu CY - Tartu, Estonia DA - 16.06.2025 KW - Biocides KW - Biocide resistance KW - Phenotypic heterogeneity KW - Glutaraldehyde KW - Disinfectants PY - 2025 AN - OPUS4-63834 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nordholt, Niclas T1 - Evolution and mechanistic basis of disinfectant tolerance in E. coli N2 - Disinfectants are important to provide hygiene in sensitive areas, to prevent the spread of infections and to preserve materials from biodeterioration. Bacteria can survive disinfection through phenotypic and genotypic adaptation. Phenotypic heterogeneity may be linked to the ability to evolve disinfectant tolerance. The genetic factors which determine the survival of disinfection remain largely unknown. Here, we investigate the effects of phenotypic heterogeneity on the evolvability of disinfectant tolerance. Furthermore, using a whole-genome CRISPRi-library, we uncover genetic determinants that are important for the survival of disifenction. T2 - µClub Seminar Berlin CY - Berlin, Germany DA - 23.05.2025 KW - Biocides KW - Heterogeneity KW - Biocide resistance KW - Evolution KW - Disinfectants PY - 2025 AN - OPUS4-63833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Mechanisms and evolution of resistance to antimicrobial biocides N2 - Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution, selection and transmission of AMR. These processes are impacted by pollution with antibiotics. However, antimicrobial biocides used as disinfectants and material preservatives are major pollutants exceeding the antibiotic market in terms of chemical diversity and mass. The aim of our work is to understand the mechanisms and risks of biocides for resistance and antibiotic cross-resistance evolution in bacteria to optimize their application and safeguard their efficacy. Our work shows that biocides have the potential to affect evolutionary processes towards AMR by increasing the rates of de-novo mutation and conjugation. Importantly, widely used compounds such as chlorhexidine and quaternary ammonium compounds (QACs) affect rates of mutation and conjugation at environmentally relevant concentrations. Furthermore, we show that single-cell phenotypic heterogeneity regarding tolerance (persistence) determines survival against specific biocides including QACs and isopropanol. Mechanistic investigations reveal that known antibiotic persister mechanisms contribute to persister formation to biocides. The evolution of high-level tolerance to different biocides is linked to the initial persister level and the evolution of specific genetically encoded mechanisms related to properties of the cell envelope. Biocide-tolerant strains have a selective advantage in the presence of environmentally-relevant concentrations of antibiotics, which could lead to the stabilization of biocide tolerance in environments where biocides and antibiotics co-occur (e.g. wastewater, animal stables). Taken together, our work shows the importance of assessing the contribution of biocides on evolution and selection of AMR in the environment. T2 - EMBO Symposium on Mechanisms of drug resistance and tolerance in bacteria, fungi, and cancer CY - Heidelberg, Germany DA - 18.03.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance PY - 2025 AN - OPUS4-64866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanaris, Orestis T1 - Consequences of benzalkonium chloride tolerance on the development of antibiotic resistance in E. coli N2 - Biocides are used in large amounts in industrial, medical, and domestic settings. Benzalkonium chloride (BAC) is a commonly used biocide, for which previous research revealed that Escherichia coli can rapidly adapt to tolerate BAC-disinfection, with consequences for antibiotic susceptibility. However, the consequences of BAC-tolerance for selection dynamics and resistance evolution to antibiotics remain unknown. Here, we investigated the effect of BAC-tolerance in E. coli on its response upon challenge with different antibiotics. Competition assays showed that subinhibitory concentrations of ciprofloxacin - but not ampicillin, colistin and gentamicin - select for the BAC-tolerant strain over the BAC-sensitive ancestor at a minimal selective concentration of 0.0013-0.0022 µg∙mL-1. In contrast, the BAC-sensitive ancestor was more likely to evolve resistance to ciprofloxacin, colistin and gentamicin than the BAC-tolerant strain when adapted to higher concentrations of antibiotics in a serial transfer laboratory evolution experiment. The observed difference in the evolvability of resistance to ciprofloxacin was partly explained by an epistatic interaction between the mutations conferring BAC-tolerance and a knockout mutation in ompF encoding for the outer membrane porin F. Taken together, these findings suggest that BAC-tolerance can be stabilized in environments containing low concentrations of ciprofloxacin, while it also constrains evolutionary pathways towards antibiotic resistance. T2 - µClub Seminar CY - Berlin, Germany DA - 23.05.2025 KW - Biocides KW - AMR KW - Resistance evolution PY - 2025 AN - OPUS4-64658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocides as drivers for the evolution of antimicrobial resistance N2 - This presentation provides an overview about how biocides drive the evolution of antimicrobial resistance during application and as pollutants in the environment. The presentation shows that biocides can lead to heterogeneous killing, facilitating tolerance evolution. This evolution is related to decreased susceptibility to antibiotics and has potential for co-selection. In contrast, evolved tolerance can limit antibiotic evolvability via epistatic interactions. Moreover, biocides can co-select for antibiotic resistance in wastewater and affect rates of mutation and horizontal gene transfer. Biocides and antibiotics show strong combination effects with consequences for selection of antibiotic resistance. T2 - Novel strategies and considerations in fighting pathogens CY - Tartu, Estonia DA - 16.06.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 AN - OPUS4-64867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocides as drivers for the Selection and evolution of antimicrobial resistance N2 - Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution, selection and transmission of AMR. These processes are impacted by pollution with antibiotics. However, antimicrobial biocides used as disinfectants and material preservatives are major pollutants exceeding the antibiotic market in terms of chemical diversity and mass. The aim of our work is to understand the mechanisms and risks of biocides for resistance and antibiotic cross-resistance evolution in bacteria to optimize their application and safeguard their efficacy. We use adaptive laboratory evolution experiments, phenotypic characterization, single-cell analysis, whole genome sequencing, and competition experiments to investigate AMR evolution and selection of the model organism E. coli in the presence of biocides. Our work shows that biocides have the potential to affect evolutionary processes towards AMR by increasing the rates of de-novo mutation and conjugation. Importantly, widely used compounds such as chlorhexidine and quaternary ammonium compounds (QACs) affect rates of mutation and conjugation at environmentally relevant concentrations. Furthermore, we show that single-cell phenotypic heterogeneity regarding tolerance (persistence) determines survival against specific biocides including QACs and isopropanol. Mechanistic investigations reveal that known antibiotic persister mechanisms contribute to persister formation to biocides. The evolution of high-level tolerance to different biocides is linked to the initial persister level and the evolution of specific genetically encoded mechanisms related to properties of the cell envelope. Biocide-tolerant strains have a selective advantage in the presence of environmentally-relevant concentrations of antibiotics, which could lead to the stabilization of biocide tolerance in environments where biocides and antibiotics co-occur (e.g. wastewater, animal stables). Taken together, our work shows the importance of assessing the contribution of biocides on evolution and selection of AMR in the environment. T2 - 10th Symposium on Antimicrobial Resistance in Animals and the Environment (ARAE) CY - Berlin, Germany DA - 30.06.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 AN - OPUS4-64869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Biocides as drivers for the evolution of antimicrobial resistance N2 - This presentation provides an overview about how biocides drive the evolution of antimicrobial resistance during application and as pollutants in the environment. The presentation shows that biocides can lead to heterogeneous killing, facilitating tolerance evolution. This evolution is related to decreased susceptibility to antibiotics and has potential for co-selection. In contrast, evolved tolerance can limit antibiotic evolvability via epistatic interactions. Moreover, biocides can co-select for antibiotic resistance in wastewater and affect rates of mutation and horizontal gene transfer. Biocides and antibiotics show strong combination effects with consequences for selection of antibiotic resistance. T2 - Vorstellungsvortrag zur Habilitation FU Berlin CY - Berlin, Germany DA - 15.05.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Standardization PY - 2025 AN - OPUS4-64873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -