TY - RPRT A1 - Stephan, Ina A1 - Boenke, Viola A1 - Drecker, Sigrid T1 - Weiterentwicklung und Verbesserung des Konzeptes zur Begrenzung von Konservierungsmitteln für Produkte mit dem Blauen Engel N2 - Im Rahmen des Forschungsvorhabens wurde die biologische Prüfmethode der Checkliste zur stoffli-chen Bewertung im Rahmen des Aufnahmeverfahrens für weitere Topfkonservierungsmittel in den Anhang 1 zur Vergabegrundlage RAL-UZ102 „Emissionsarme Innenwandfarben“ überarbeitet. Der Test für den Einsatz von Konservierungsmitteln in seiner jetzigen Fassung besteht seit nahezu 20 Jah-ren und erfolgt ausschließlich an weißer Dispersionsfarbe für den Innenraum. Die hierbei ermittelten Höchstmengen für den Einsatz von Topfkonservierern werden z.Zt. auch auf andere Innenraumbau-produkte übertragen. Ziel war es zu klären, ob die Anforderungen an die Topfkonservierung bei Far-ben tatsächlich für andere Innenraumbauprodukte übernommen werden können. Die im Vorhaben durchgeführten Versuche deuten darauf hin, dass dies nicht ohne weiteres möglich ist. Nach Rückspra-che mit Vertretern aus der Industrie wurde das Keimspektrum für die Prüfung zudem um Hefe- und Schimmelpilze erweitert. Des Weiteren wurde eine künstliche Alterung eingeführt und überprüft, ob dies einen Einfluss auf den Gehalt an Isothiazolinonen hat. Die Konzentration von Isothialzolinonen wurde mittels Ultra-Hochleistungsflüssigkeitschromatographie kontrolliert und hinsichtlich einer Kor-relation mit dem Wachstum von Mikroorganismen ausgewertet. Da die in den Innenraumbauproduk-ten zugesetzten Isothiazolinone als Kontaktallergene bekannt sind, ist es ein Ziel des „Blauen Engel“-Umweltzeichens, die geringste erforderliche Menge an Konservierungsmittel in den Produkten zu ver-wenden, ohne die positive Auswirkung der Topfkonservierung zu gefährden. Daher sind die Optimie-rung der Leistungsstärke von Konservierungsmitteln und die Kontrolle der Hygiene im Herstellungs-prozess von zunehmender Bedeutung. Um Einblicke in den Herstellungsprozess von Farben zu gewin-nen, wurden im Rahmen des Vorhabens vier Farbwerke besichtigt, in denen weiße Innenraumfarben produziert werden, die mit dem Umweltzeichen „Blauer Engel“ ausgezeichnet sind. Gemeinsam mit den Fachleuten vor Ort wurde diskutiert, welche Maßnahmen zur Verbesserung der Werkshygiene er-griffen werden können, um den Einsatz von Topfkonservierern möglichst gering zu halten. Des Weite-ren wurde in dem Forschungsvorhaben untersucht, ob eine schnellere Bestimmung der Keimzahl in den Rohstoffen mittels quantitativer Polymerasekettenreaktion bereits im Farbwerk realisierbar ist. KW - Methode KW - Isothiazolinone KW - Gebindekonservierung KW - Bakterien KW - Schimmel KW - Wirksamkeit KW - Biozide PY - 2020 SN - 1862-4804 VL - 54 SP - 4 EP - 149 PB - Umweltbundesamt CY - Dessau AN - OPUS4-50972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - European Food Safety Authority (EFSA), A1 - European Centre for Disease Prevention and Control (ECDC), A1 - European Chemicals Agency (ECHA), A1 - European Environment Agency (EEA), A1 - European Medicines Agency (EMA), A1 - European Commission's Joint Research Centre (JRC), T1 - Annex to: Scientific report 'Impact of the use of azole fungicides, other than as human medicines, on the development of azole-resistant Aspergillus spp.' doi:10.2903/j.efsa.2025.9200 - Annex E - Detailed answer to Term of Reference 5 'Environmental hotspots' and Term of Reference 6 'Prevention and control options' N2 - The widespread use of azole compounds in various sectors has led to the emergence of azole-resistant Aspergillus fumigatus (ARAf), which poses a significant challenge for treating fungal infections, especially in immunocompromised patients. Certain environmental conditions and practices, particularly in agricultural settings and the use of azoles as biocides, have been identified as hotspots for the selection and dispersal of azole-resistant strains of Aspergillus spp. Factors contributing to the selection of resistance include the use of azoles in crop protection, wood preservation and, to a much lesser extent, veterinary medicine. For plant protection products (PPPs), a number of scenarios (green waste of indoor-grown vegetables, uses with the production of wet pomace used as fertiliser, maize or sugar beet silage, and field heaps including flower bulbs) are deemed high risk for hotspot development. Based on EU authorised use patterns, these scenarios are characterised by the hazard characteristics of the azole fungicides in terms of activity against the wild-type Aspergillus spp. compared to resistant strains, substrate characteristics and residue levels, and environmental conditions that promote the growth of the fungus. For biocidal azole applications, products (biocidal product [BP]) for temporary preservation of freshly cut wood have been identified to have the potential for hotspot formation because freshly cut wood allows the growth of Aspergillus spp., and azole concentrations in treated wood are above the predicted no effect concentration (PNEC) for resistance selection (PNECres) and below the minimum inhibitory concentration (MIC) of ARAf for most analysed products on the EU market. Following identification of environmental hotspots, the report recommends measures to prevent the selection of azole-resistant strains in the environment, including controlled storage of organic waste, proper waste management, and responsible use and disposal of azole-treated products. Azole use in veterinary medicinal products (VMPs) represents a very small percentage of total azole use and is unlikely to be a significant source of selection of resistance in the environment. As such, the focus for mitigating resistance should be on other uses of azoles. The report stresses the importance of ongoing surveillance to monitor the presence of ARAf in the environment and to inform risk assessments and management strategies. As industrial chemicals, the azole substances are mostly used as intermediates (precursors) to manufacture yet a different substance, are formulated into a mixture or are reported to be manufactured as active substances in PPP, BP or VMP (therefore already covered above). There are only a few industrial azole substances with widespread use, and as for the moment, there is no evidence from the literature that industrial azoles would be a source of a possible hotspot; thus, the industrial chemicals were not further investigated. There are several areas where further research is needed, including understanding the environmental conditions that support the growth of Aspergillus spp. in different agricultural matrices or on wood, assessing human exposure to resistant strains, regional waste practices and the impact of active substance combinations for azole resistance selection. There is also a need for more comprehensive data on the use and quantities of azole-containing products. Furthermore, industrial substances with widespread use and having antifungal effects, e.g. an antidandruff substance in cosmetics, could be further investigated. Measures were identified that could be implemented with respect to the use of azole fungicides in PPPs as well as in BPs and with respect to the storage, processing and disposal of crop (waste) materials containing azole residues to prevent or minimise the selection of environmental resistance or to minimise the spread of resistant Aspergillus spp. to patients. Any measures that slow down or prevent growth in the presence of azoles, sporulation and dispersal of Aspergillus spp. should be encouraged. A coordinated effort among various stakeholders, including farmers, manufacturers, industrial users, waste managers, regulatory bodies and scientists, is essential to effectively address the challenge of azole resistance in A. fumigatus. KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance KW - Azoles KW - Fungi KW - Wood preservatives PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652187 UR - https://doi.org/10.5281/zenodo.14223436 DO - https://doi.org/10.5281/zenodo.14223435 SP - 1 EP - 76 PB - Zenodo CY - Geneva AN - OPUS4-65218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -