TY - JOUR
A1 - Ibrahim, B.
A1 - McMahon, Dino Peter
A1 - Hufsky, F.
A1 - Beer, M.
A1 - Ding, L.
A1 - Le Mercier, P.
A1 - Palmarini, M.
A1 - Thiel, V.
A1 - Marz, M.
T1 - A new era of virus bioinformatics
N2 - Despite the recognized excellence of virology and bioinformatics, these two communities have interacted surprisingly sporadically, aside from some pioneering work on HIV-1 and influenza. Bringing together the Expertise of bioinformaticians and virologists is crucial, since very specific but fundamental computational approaches are required for virus research, particularly in an era of big data. Collaboration between virologists and bioinformaticians is necessary to improve existing analytical tools, cloud-based systems, computational resources, data sharing approaches, new diagnostic tools, and bioinformatic training. Here, we highlight current progress and discuss potential avenues for future developments in this promising era of virus bioinformatics. We end by presenting an overview of current technologies, and by outlining some of the Major challenges and Advantages that bioinformatics will bring to the field of virology.
KW - Bioinformatics virology viruses software
PY - 2018
DO - https://doi.org/10.1016/j.virusres.2018.05.009
SN - 0168-1702
SN - 1872-7492
VL - 251
SP - 86
EP - 90
PB - Elsevier
CY - Amsterdam
AN - OPUS4-45880
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ibrahim, B.
A1 - Arkhipova, K.
A1 - Andeweg, A.C.
A1 - Posada-Céspedes, S.
A1 - Enault, F.
A1 - Gruber, A.
A1 - Koonin, E.V.
A1 - Kupczok, A.
A1 - Lemey, P.
A1 - McHardy, A.C.
A1 - McMahon, Dino Peter
A1 - Pickett, B.E.
A1 - Robertson, D.L.
A1 - Scheuermann, R.H.
A1 - Zhernakova, A.
A1 - Zwart, M.P.
A1 - Schönhuth, A.
A1 - Dutilh, B.E.
A1 - Marz, M.
T1 - Bioinformatics meets virology: The European virus bioinformatics center's second annual meeting
N2 - The Second Annual Meeting of the European Virus Bioinformatics Center (EVBC), held in Utrecht, Netherlands, focused on computational approaches in virology, with topics including (but not limited to) virus discovery, diagnostics, (meta-)genomics, modeling, epidemiology, molecular structure, evolution, and viral ecology. The goals of the Second Annual Meeting were threefold: (i) to bring together virologists and bioinformaticians from across the academic, industrial, professional, and training sectors to share best practice; (ii) to provide a meaningful and interactive scientific environment to promote discussion and collaboration between students, postdoctoral fellows, and both new and established investigators; (iii) to inspire and suggest new research directions and questions. Approximately 120 researchers from around the world attended the Second Annual Meeting of the EVBC this year, including 15 renowned international speakers. This report presents an overview of new developments and novel research findings that emerged during the meeting.
KW - Bioinformatics
KW - Software
KW - Virology
KW - Viruses
PY - 2018
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-458814
DO - https://doi.org/10.3390/v10050256
SN - 1999-4915
VL - 10
IS - 5
SP - 256, 1
EP - 19
PB - MDPI
AN - OPUS4-45881
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Stock, S. C.
A1 - Köster, M.
A1 - Dippold, M. A.
A1 - Nájera, F.
A1 - Matus, F.
A1 - Merino, C.
A1 - Boy, J.
A1 - Spielvogel, S.
A1 - Gorbushina, Anna
A1 - Kuzyakov, Y.
T1 - Environmental drivers and stoichiometric constraints on enzyme activities in soils from rhizosphere to continental scale
N2 - Microbial activity and functioning in soils are strongly limited by carbon (C) availability, of which a great proportion is released by living roots. Rhizodeposition and especially root exudates stimulate microbial activity and growth, and may shift the stoichiometric balance between C, N, and P. Thereby, exudates heighten microbial nutrient demand and acquisition of N and P from organic matter, leading to an increase in enzyme production. Aim of this study was to determine environmental controls of extracellular enzyme production, and hence on potential enzyme activities (Vmax) and substrate affinities (Km). To determine the controlling factors, we worked on four spatial scales from the microscale (i.e. rhizosphere) through the mesoscale (i.e. soil depth) and landscape scale (relief positions), and finally to the continental scale (1200 km transect within the Coastal Cordillera of Chile). Kinetics of seven hydrolyzing enzymes of the C, N, and P cycles (cellobiohydrolase, β‑glucosidase, β‑xylosidase, β‑N‑acetylglucosaminidase, leucine‑aminopeptidase, tyrosine‑aminopeptidase, and acid phosphatase) were related to soil texture, C and N contents, pH, and soil moisture via redundancy analysis (RDA). Potential activities of C, N, and P acquiring enzymes increased up to 7-times on the continental scale with rising humidity of sites and C and N contents, while substrate affinities simultaneously declined. On the landscape scale, neither Vmax nor Km of any enzyme differed between north and south slopes. From top- to subsoil (down to 120 cm depth) potential activities decreased (strongest of aminopeptidases under humid temperate conditions with up to 90%). Substrate affinities, however, increased with soil depth only for N and P acquiring enzymes. Affinities of cellobiohydrolase and β‑xylosidase, on the contrary, were 1.5- to 3-times higher in top- than in subsoil. Potential activities of N and P acquiring enzymes and β‑glucosidase increased form bulk to roots. Simultaneously, substrate affinities of N and P acquiring enzymes declined, whereas affinities of β‑glucosidase increased. These trends of activities and affinities in the rhizosphere were significant only for acid phosphatase. The RDA displayed a strong relation of potential activities of C and P acquiring enzymes and β‑N‑acetylglucosaminidase to C and N contents in soil as well as to the silt and clay contents. Aminopeptidase activity was mainly dependent on soil moisture and pH. We conclude that substrate availability for microorganisms mainly determined enzyme activity patterns on the continental scale by the humidity gradient. Patterns on the meso- and microscale are primarily controlled by nutrient limitation, which is induced by a shift of the stoichiometric balance due to input of easily available C by roots in the rhizosphere.
KW - Extracellular enzymes
KW - Stoichiometric homeostasis
KW - Rhizosphere effect
KW - Nutrient acquisition
KW - Multi-scale study
PY - 2018
DO - https://doi.org/10.1016/j.geoderma.2018.10.030
SN - 0016-7061
SN - 1872-6259
VL - 2019
IS - 337
SP - 973
EP - 982
PB - Elsevier B.V.
AN - OPUS4-46829
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pokharel, R.
A1 - Gerrits, Ruben
A1 - Schuessler, J. A.
A1 - Frings, P. J.
A1 - Sobotka, R.
A1 - Gorbushina, Anna
A1 - von Blanckenburg, F.
T1 - Magnesium stable isotope fractionation on a cellular level explored by cyanobacteria and black fungi with implications for higher plants
N2 - In a controlled growth experiment we found that the cyanobacterium Nostoc punctiforme has a bulk cell 26Mg/24Mg ratio (expressed as δ26Mg) that is −0.27‰ lower than the growth solution at a pH of ca. 5.9. This contrasts with a recently published δ26Mg value that was 0.65‰ higher than growth solution for the black fungus Knufia petricola at similar laboratory conditions, interpreted to reflect loss of 24Mg during cell growth. By a mass balance model constrained by δ26Mg in chlorophyll extract we inferred the δ26 Mg value of the main Mg compartments in a cyanobacteria cell: free cytosolic Mg (−2.64‰), chlorophyll (1.85‰), and the nonchlorophyll-bonded Mg compartments like ATP and ribosomes (−0.64‰). The lower δ26Mg found in Nostoc punctiforme would thus result from the absence of significant Mg efflux during cell growth in combination with either (a) discrimination against 26Mg during uptake by desolvation of Mg or transport across protein channels or (b) discrimination against 24Mg in the membrane transporter during efflux. The model predicts the preferential incorporation of 26Mg in cells and plant organs low in Mg and the absence of isotope fractionation in those high in Mg, corroborated by a compilation of Mg isotope ratios from fungi, bacteria, and higher plants.
KW - Cyanobacteria
KW - Black fungi
KW - Nostoc punctiforme
KW - Knufia petricola
KW - Magnesium
PY - 2018
DO - https://doi.org/10.1021/acs.est.8b02238
SN - 1520-5851
SN - 0013-936X
VL - 52
IS - 21
SP - 12216
EP - 12224
PB - ACS Publications
AN - OPUS4-46832
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Davis, Hannah
A1 - Meconcelli, Stefania
A1 - Radek, R.
A1 - McMahon, Dino Peter
T1 - Termites shape their collective behavioural response based on stage of infection
N2 - Social insects employ a range of behaviours to protect their colonies against disease, but little is known about how such collective behaviours are orchestrated. This is especially true for the social Blattodea (termites). We developed an experimental approach that allowed us to explore how the social response to disease is co-ordinated by multistep host-pathogen interactions. We infected the eastern subterranean termite Reticulitermes flavipes with the entomopathogenic fungus Metarhizium anisopliae, and then, at different stages of infection, reintroduced them to healthy nestmates and recorded behavioural responses. As expected, termites groomed pathogen-exposed individuals significantly more than controls; however, grooming was significantly elevated after fungal germination than before, demonstrating the importance of fungal status to hygienic behaviour. Significantly, we found that cannibalism became prevalent only after exposed termites became visibly ill, highlighting the importance of host condition as a cue for social hygienic behaviour. Our study reveals the presence of a coordinated social response to disease that depends on stage of infection. Specifically, we show how the host may play a key role in triggering its own sacrifice. Sacrificial self-flagging has been observed in other social insects: our results demonstrate that termites have independently evolved to both recognize and destructively respond to sickness.
KW - Social
KW - Immunity
KW - Cannibalism
KW - Entomopathogen
PY - 2018
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-463239
DO - https://doi.org/10.1038/s41598-018-32721-7
SN - 2045-2322
VL - 8
SP - 14433, 1
EP - 10
PB - Nature
CY - London
AN - OPUS4-46323
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Oprzeska-Zingrebe, E. A.
A1 - Meyer, Susann
A1 - Roloff, Alexander
A1 - Kunte, Hans-Jörg
A1 - Smiatek, J.
T1 - Influence of compatible solute ectoine on distinct DNA structures: thermodynamic insights into molecular binding mechanisms and destabilization effects
N2 - In nature, the cellular environment of DNA includes not only water and ions, but also other components and co-solutes, which can exert both stabilizing and destabilizing effects on particular oligonucleotide conformations. Among them, ectoine, known as an important osmoprotectant organic co-solute in a broad range of pharmaceutical products, turns out to be of particular relevance. In this article, we study the influence of ectoine on a short single-stranded DNA fragment and on double-stranded helical B-DNA in aqueous solution by means of atomistic molecular dynamics (MD) simulations in combination with molecular theories of solution. Our results demonstrate a conformation-dependent binding behavior of ectoine, which favors the unfolded state of DNA by a combination of electrostatic and dispersion interactions. In conjunction with the Kirkwood–Buff theory, we introduce a simple Framework to compute the influence of ectoine on the DNA melting temperature. Our findings reveal a significant linear decrease of the melting temperature with increasing ectoine concentration, which is found to be in qualitative agreement with results from denaturation experiments. The outcomes of our Computer simulations provide a detailed mechanistic rationale for the surprising destabilizing influence of ectoine on distinct DNA structures.
KW - Ectoine
KW - DNA
KW - Thermodynamic
KW - Melting temperature
PY - 2018
DO - https://doi.org/10.1039/c8cp03543a
SN - 1463-9076
SN - 1463-9084
VL - 20
IS - 40
SP - 25861
EP - 25874
PB - Royal Society of Chemistry
AN - OPUS4-46327
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Urbanczyk, M.M.
A1 - Bester, K.
A1 - Borho, N.
A1 - Schoknecht, Ute
A1 - Bollmann, U.E.
T1 - Influence of pigments on phototransformation of biocides in paints
N2 - Biocides are commonly applied to construction materials such as facade renders and paints in order to protect them from microbial spoilage. These renders and paints are exposed to weathering conditions, e.g., sunlight and rain. Pigments are interacting intensively with the spectrum of the incoming light; thus, an effect of paint pigments on phototransformation rates and reaction pathways of the biocides is hypothesized.
In this study, the phototransformation of four commonly used biocides (carbendazim, diuron, octylisothiazolinone (OIT) and terbutryn) in four different paint formulations differing solely in pigments (red and black iron oxides, white titanium dioxide, and one pigment-free formulation) were investigated. Paints surfaces were irradiated under controlled conditions. The results show that biocides degrade most rapidly in the pigment-free formulation. The degradation in the pigment-free formulation followed a first-order kinetic model with the respective photolysis rate constants: kp,Diuron=0.0090 h−1, kp,OIT=0.1205 h−1, kp,Terbutryn=0.0079 h−1.
Carbendazim concentrations did not change significantly. The degradation was considerably lower in the pigment-containing paints. The determination of several phototransformation products of terbutryn and octylisothiazolinone showed different transformation product ratios dependent on the pigment. Consequently, pigments not only reflect the incoming light, but also interact with the biocide photodegradation.
KW - OIT
KW - Terbutryn
KW - Indirect photolysis
KW - Construction materials
PY - 2019
DO - https://doi.org/10.1016/j.jhazmat.2018.10.018
SN - 0304-3894
VL - 364
SP - 125
EP - 133
PB - Elsevier
AN - OPUS4-46328
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Marchant, H. K.
A1 - Tegetmeyer, H. E.
A1 - Ahmerkamp, S.
A1 - Holtappels, M.
A1 - Lavik, G.
A1 - Graf, J.
A1 - Schreiber, Frank
A1 - Mussmann, M.
A1 - Strous, M.
A1 - Kuypers, M. M. M.
T1 - Metabolic specialization of denitrifiers in permeable sediments controls N2O emissions
N2 - Coastal oceans receive large amounts of anthropogenic fixed nitrogen (N), most of which is denitrified in the sediment before reaching the open ocean. Sandy sediments, which are common in coastal regions, seem to play an important role in catalysing this N‐loss. Permeable sediments are characterized by advective porewater transport, which supplies high fluxes of organic matter into the sediment, but also leads to fluctuations in oxygen and nitrate concentrations. Little is known about how the denitrifying communities in these sediments are adapted to such fluctuations. Our combined results indicate that denitrification in eutrophied sandy sediments from the world's largest tidal flat system, the Wadden Sea, is carried out by different groups of microorganisms. This segregation leads to the formation of N2O which is advectively transported to the overlying waters and thereby emitted to the atmosphere. At the same time, the production of N2O within the sediment supports a subset of Flavobacteriia which appear to be specialized on N2O reduction. If the mechanisms shown here are active in other coastal zones, then denitrification in eutrophied sandy sediments may substantially contribute to current marine N2O emissions.
KW - Nitrous oxide
KW - Denitrification
KW - Cross-feeding
PY - 2018
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-463061
UR - https://onlinelibrary.wiley.com/doi/full/10.1111/1462-2920.14385
DO - https://doi.org/10.1111/1462-2920.14385
SN - 1462-2920
SN - 1462-2912
VL - 20
IS - 12
SP - 4486
EP - 4502
PB - John Wiley & Sons Ltd
AN - OPUS4-46306
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Heisterkamp, I.
A1 - Gartiser, S.
A1 - Kalbe, Ute
A1 - Bandow, N.
A1 - Gloßmann, A.
T1 - Assessment of leachates from reactive fire-retardant coatings by chemical analysis and ecotoxicity testing
N2 - The environmental compatibility of reactive fire-retardant coatings (intumescent paints) was investigated by a combination of leaching and ecotoxicological tests. Three representative fire-retardant coating systems were tested using two leaching procedures: “Horizontal Dynamic Surface Leaching Test” (DSLT) and the “Intermittent Immersion Test” (IIT). All eluate fractions (8 for DSLT and 9 for IIT) were analyzed for pH, conductivity, concentration of total organic carbon and selected anions und cations. Additionally, a GC-MS screening of selected fractions was conducted for identification of organic compounds. Eluate fractions 1 + 2 and fraction 7 of the DSLT were analyzed in four ecotoxicological tests (algae, daphnia, fish egg, luminescent bacteria) and in one genotoxicity test (umu). Concentration of most analytes was rather low or below limit of detection for many eluates. Analytes detected in eluates of all three products are Zn, Ba, SO4(2−) and PO4(3−). Release patterns do not indicate a general trend: some compounds show maximum release in the first fractions while for others the maximum was observed in later test stages. Ecotoxic effects in eluates were found, which were higher in the eluate fraction 7 (maximum lowest ineffective dilution for luminescent bacteria (LIDL) 256) than in the eluate fraction 1 + 2 (maximum LIDL = 24). The sensitivity of the test systems was very different with highest effects for luminescent bacteria, followed by algae and daphnia and without effects in the fish egg test and umu test. A biotest battery for the comprehensive assessment is therefore advisable.
KW - Construction products regulation (CPR)
KW - Intumescent coating
KW - Fire-retardant paint
KW - Leaching
KW - Ecotoxicity
PY - 2019
DO - https://doi.org/10.1016/j.chemosphere.2019.03.044
SN - 0045-6535
SN - 1879-1298
VL - 226
SP - 85
EP - 93
PB - Elsevier
AN - OPUS4-47696
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Vogel, Christian
A1 - Sekine, R.
A1 - Steckenmesser, D.
A1 - Lombi, E.
A1 - Herzel, Hannes
A1 - Zuin, L.
A1 - Wang, D.
A1 - Felix, R.
A1 - Adam, Christian
T1 - Combining diffusive gradients in thin films (DGT) and spectroscopic techniques for the determination of phosphorus species in soils
N2 - A wide range of methods are used to estimate the plant-availability of soil phosphorus (P). Published research has shown that the diffusive gradients in thin films (DGT) technique has a superior correlation to plant-available P in soils compared to standard chemical extraction tests. In order to identify the plantavailable soil P species, we combined DGT with infrared and P K- and L2,3-edge X-ray adsorption near edge structure (XANES) spectroscopy. This was achieved by spectroscopically investigating the dried binding layer of DGT devices after soil deployment. All three spectroscopic methods were able to distinguish between different kinds of phosphates (poly-, trimeta-, pyro- and orthophosphate) on the DGT binding layer. However, infrared spectroscopy was most sensitive to distinguish between different types of adsorbed inorganic and organic phosphates. Furthermore, intermediates of the time-resolved hydrolysis of trimetaphosphate in soil could be analyzed.
KW - Phosphorus plant-availability
KW - X-ray adsorption near-edge structure (XANES) spectroscopy
KW - Infrared spectroscopy
KW - Diffusive gradients in thin films (DGT)
PY - 2019
DO - https://doi.org/10.1016/j.aca.2019.01.037
SN - 0003-2670
VL - 1057
SP - 80
EP - 87
PB - Elsevier
AN - OPUS4-47471
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Uhlig, S.
A1 - Colson, B.
A1 - Schoknecht, Ute
T1 - A mathematical approach for the analysis of data obtained from the monitoring of biocides leached from treated materials exposed to outdoor conditions
N2 - Leaching processes are responsible for the release of biocides from treated materials into the environment.
Adequate modeling of emission processes is required in order to predict emission values in the framework of the risk assessment of biocidal products intended for long-term service life. Regression approaches have been applied to data obtained from the long-term monitoring of biocide emissions in experiments involving semi-field conditions. Due to the complex interaction of different underlying mechanisms such as water and biocide diffusion and desorption, however, these attempts have proven to be of limited usefulness e at least, for the available biocide emission data. It seems that the behavior of the biocide emission curve depends to a considerable extent on whichever underlying mechanism is slowest at a given point in time, thus limiting the amount of biocide available for release. Building on results obtained in the past few years, the authors propose a criterion for determining which mechanism controls the leaching process at a given point in time based on the slope of the log-log emission curve. In addition, a first-order approximation of this slope value is presented which displays advantages both in terms of computability and interpretability. Finally, an algorithm for the determination of breakpoints in the slope of the log-log emission curve is presented for the demarcation of phases within which one mechanism acts as a limiting factor.
KW - Biocides
KW - Leaching
KW - Weathering
KW - Mathematical analysis
PY - 2019
DO - https://doi.org/10.1016/j.chemosphere.2019.04.102
SN - 0045-6535
SN - 1879-1298
VL - 228
SP - 271
EP - 277
PB - Elsevier
AN - OPUS4-47886
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Recknagel, Sebastian
A1 - Bresch, Harald
A1 - Kipphardt, Heinrich
A1 - Resch-Genger, Ute
A1 - Koch, Matthias
A1 - Rosner, M.
T1 - Trends in selected fields of reference material production
N2 - For more than 110 years, BAM has been producing reference materials for a wide range of application fields. With the development of new analytical methods and new applications as well as continuously emerging more stringent requirements of laboratory accreditation with regard to quality control and metrological traceability, the demand and requirements for reference materials are increasing. This trend article gives an overview of general developments in the field of reference materials as well as developments in selected fields of application in which BAM is active. This includes inorganic and metal analysis, gas analysis, food and consumer products, and geological samples. In addition to these more traditional fields of application, developments in the areas of optical spectroscopy, particulary fluorescence methods, and nanomaterials are considered.
T2 - 150 years BAM: Science with impact
CY - Berlin, Germany
DA - 01.01.2021
KW - Reference material
KW - ISO REMCO
KW - Gas analysis
KW - Food
KW - Nanomaterials
KW - Fluorescence
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-548407
DO - https://doi.org/10.1007/s00216-022-03996-7
SN - 1618-2642
SN - 1618-2650
VL - 414
IS - Topical collection: Analytical methods and applications in the materials and life sciences
SP - 4281
EP - 4289
PB - Springer
CY - Berlin
AN - OPUS4-54840
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Singh, Amit Kumar
A1 - Mishra, Biswajit
A1 - Sinha, Om Prakash
T1 - Reduction Kinetics of Fluxed Iron Ore Pellets Made of Coarse Iron Ore Particles
N2 - The present work demonstrates a sustainable approach of using relatively coarser iron ore particles for ironmaking. The motivation is to reduce the energy consumption in the milling of the iron ore by utilizing coarser iron ore particles (+0.05 mm) and to select a suitable binder for improving pellet properties. Iron ore fines in the range of 0.05–0.25 mm was selected and classified into three size ranges. Fluxed iron ore pellets were prepared using lime as a binder for the basicity of 0, 1, and 2. Reduction of these pellets with a packed bed of coal fines was performed in the temperature range of 900–1200 °C for a duration of 30–120 min. The direct reduction kinetics of the iron ore pellets were studied by employing diffusion and chemical reaction control models to the experimental data. The results show that pellets made with coarser iron ore particles have improved reduction behavior and kinetics. The reduction reaction is found to be a mixed control. The activation energy for the reduction reaction varies from 44.3 to 74.76 kJ mol−1 as iron ore particle size decreases from 0.25 to 0.05 mm and basicity increases from 0 to 2.
KW - Materials Chemistry
KW - Metals and Alloys
KW - Process Metallurgy
KW - Iron making
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598326
DO - https://doi.org/10.1002/srin.202300669
SN - 1611-3683
IS - 2300669
SP - 1
EP - 9
PB - Wiley VHC-Verlag
AN - OPUS4-59832
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schwibbert, Karin
A1 - Richter, Anja M.
A1 - Krüger, Jörg
A1 - Bonse, Jörn
T1 - Laser-Textured Surfaces: A Way to Control Biofilm Formation?
N2 - Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria-repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria-repellent surfaces lies in the contactless and aseptic large-area laser-processing of technical surfaces. Tailored surface textures, enabled by different laser-processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state-of-the-art review of laser-surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser-processed surfaces, the challenges of anti-microbial surface designs are discussed, and future directions will be outlined.
KW - Antibacterial surfaces
KW - Biofilms
KW - Laser processing
KW - Laser-induced periodic surface structures (LIPSS)
KW - Microbial adhesions
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-588260
DO - https://doi.org/10.1002/lpor.202300753
SN - 1863-8899
SP - 1
EP - 41
PB - Wiley-VCH GmbH
CY - Weinheim
AN - OPUS4-58826
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Stohl, Leonie
A1 - Manninger, Tanja
A1 - von Werder, Julia
A1 - Dehn, F.
A1 - Gorbushina, Anna
A1 - Meng, Birgit
T1 - Bioreceptivity of concrete - A review
N2 - Materials that support natural biodiversity on their surfaces can compensate for human activities that have a negative impact on nature and thus contribute to a carbon-neutral and nature-positive world. Specifically designing bioreceptive materials which favor the growth of biofilms on their surface is an approach complementing conventional, macroscopic green façades. But what exactly characterizes a bioreceptive substrate and how do biofilm and substrate interact? How and why does a spontaneous colonization and the formation of biofilms take place? What are biofilms and how can they be established in a laboratory setting? How can this existing knowledge be transferred to the artificial stone concrete so that this material can be tuned to increase (or decrease) its bioreceptivity?
This review paper aims at summarizing the existing state of knowledge on bioreceptive concrete and pointing out inconsistencies and contradictions which can only be removed by more interdisciplinary research in the field.
KW - Bioreceptivity
KW - Biofilm
KW - Green facades
KW - Developing building materials
KW - Surface interactions
KW - Concrete
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-581685
DO - https://doi.org/10.1016/j.jobe.2023.107201
SN - 2352-7102
VL - 76
SP - 1
EP - 17
PB - Elsevier
AN - OPUS4-58168
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Tavernaro, Isabella
A1 - Scholtz, Lena
A1 - Genger, C.
A1 - Welker, P.
A1 - Schreiber, Frank
A1 - Meyer, Klas
A1 - Resch-Genger, Ute
T1 - Dual color pH probes made from silica and polystyrene nanoparticles and their performance in cell studies
N2 - Ratiometric green–red fluorescent nanosensors for fluorometrically monitoring pH in the acidic range were designed from 80 nm-sized polystyrene (PS) and silica (SiO2) nanoparticles (NPs), red emissive reference dyes, and a green emissive naphthalimide pH probe, analytically and spectroscopically characterized, and compared regarding their sensing performance in aqueous dispersion and in cellular uptake studies. Preparation of these optical probes, which are excitable by 405 nm laser or LED light sources, involved the encapsulation of the pH-inert red-fuorescent dye Nile Red (NR) in the core of self-made carboxylated PSNPs by a simple swelling procedure and the fabrication of rhodamine B (RhB)-stained SiO2-NPs from a silane derivative of pH-insensitive RhB. Subsequently, the custom-made naphthalimide pH probe, that utilizes a protonation-controlled photoinduced electron transfer process, was covalently attached to the carboxylic acid groups at the surface of both types of NPs. Fluorescence microscopy studies with the molecular and nanoscale optical probes and A549 lung cancer cells confirmed the cellular uptake of all probes and their penetration into acidic cell compartments, i.e., the lysosomes, indicated by the switching ON of the green naphthalimide fluorescence. This underlines their suitability for intracellular pH sensing, with the SiO2-based nanosensor revealing the best performance regarding uptake speed and stability.
KW - Sensors
KW - Silica and polystyrene nanoparticles
KW - pH probe
KW - Fluorescence spectroscopy
KW - Cell studies
KW - Dye
KW - Particle synthesis
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-569198
DO - https://doi.org/10.1038/s41598-023-28203-0
SN - 2045-2322
VL - 13
IS - 1
SP - 1321
EP - 1336
PB - Nature
CY - London
AN - OPUS4-56919
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Richter, Matthias
A1 - Horn, Wolfgang
A1 - Juritsch, Elevtheria
A1 - Klinge, A.
A1 - Radeljic, L.
A1 - Jann, Oliver
T1 - Natural building materials for interior fitting and refurbishment - What about indoor emissions?
N2 - Indoor air quality can be adversely affected by emissions from building materials, consequently having a negative impact on human health and well-being. In this study, more than 30 natural building materials (earth dry boards and plasters, bio-based insulation materials, and boards made of wood, flax, reed, straw, etc.) used for interior works were investigated as to their emissions of (semi-) volatile organic compounds ((S)VOC), formaldehyde, and radon. The study focused on the emissions from complete wall build-ups as they can be used for internal Partition walls and the internal insulation of external walls. Test chambers were designed, allowing the compounds to release only from the surface of the material facing indoors under testing Parameters that were chosen to simulate model room conditions. The emission test results were evaluated using the AgBB evaluation scheme, a procedure for the health-related evaluation of construction products and currently applied for the approval of specific groups of building materials in Germany.
Seventeen out of 19 sample build-ups tested in this study would have passed this scheme since they generally proved to be low-emitting and although the combined emissions of multiple materials were tested, 50% of the measurements could be terminated before half of the total testing time.
KW - Bio-based insulation
KW - Earthen building materials
KW - Volatile organic compounds
KW - Semivolatile organic compounds
KW - Radon
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-519634
DO - https://doi.org/10.3390/ma14010234
VL - 14
IS - 1 (Special issue: Measurement of the environmental impact of materials)
SP - 234-1
EP - 234-14
PB - MDPI
CY - Basel
AN - OPUS4-51963
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Liaskos, C.
A1 - Rhoderick, G.
A1 - Hodges, J.
A1 - Possolo, A.
A1 - Wilke, Olaf
T1 - Pilot comparison CCQM-P177 - monoterpenes in nitrogen at 2.5 nmol/mol - final report
N2 - Growing awareness of the impact of monoterpenes on climate, atmospheric chemistry, and indoor air quality has necessitated the development of measurement standards to globally monitor and control their emissions. For National Metrology Institutes to develop such standards, it is essential that they demonstrate measurement equivalence for assigned values at the highest levels of accuracy. This report describes the results of a pilot comparison for 4 key monoterpene species: α-pinene, 3-carene, R-limonene and 1,8-cineole, at a nominal amount-of-substance fraction of 2.5 nmol mol-1. The objective of this comparison is to evaluate participant capabilities to measure trace-level monoterpenes using their own calibration techniques.
KW - Pilot comparison
KW - CCQM
KW - Monoterpene
KW - Accuracy
PY - 2020
DO - https://doi.org/10.1088/0026-1394/57/1A/08018
SN - 0026-1394
SN - 1681-7575
VL - 57
IS - 1A
SP - 08018-1
EP - 08018-21
PB - IOP Science
AN - OPUS4-51111
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Even, Morgane
A1 - Hutzler, C.
A1 - Wilke, Olaf
A1 - Luch, A.
T1 - Emissions of volatile organic compounds from polymer-based consumer products: comparison of three emission chamber sizes
N2 - The ISO 16000 standard series provide guidelines for emission measurements of volatile organic compounds (VOCs) from building materials. However, polymer-based consumer products such as toys may also release harmful substances into indoor air. In such cases, the existing standard procedures are unsuitable for official control laboratories due to high costs for large emission testing chambers. This paper aims at developing and comparing alternative and more competitive methods for the emission testing of consumer products. The influence of the emission chamber size was investigated as smaller chambers are more suited to the common size of consumer products and may help to reduce the costs of testing. Comparison of the performance of a 203 l emission test chamber with two smaller chambers with the capacity of 24 l and 44 ml, respectively, was carried out by using a polyurethane reference material spiked with 14 VOCs during the course of 28 days. The area-specific emission rates obtained in the small chambers were always similar to those of the 203 l reference chamber after a few hours. This implies that smaller chambers can provide at least useful numbers on the extent of polymer-based consumer product emissions into indoor air, thereby supporting meaningful exposure assessments.
KW - Comparison
KW - Consumer products
KW - Emission chamber
KW - Reference material
KW - Volatile organic compounds
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-493697
DO - https://doi.org/10.1111/ina.12605
VL - 30
IS - 1
SP - 40
EP - 48
PB - Wiley VCH-Verlag
AN - OPUS4-49369
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Steger, S.
A1 - Horn, Wolfgang
A1 - Eggert, G.
A1 - Krekel, C.
T1 - Are cellulose ethers safe for the conservation of artwork? New insights in their VOC activity by means of Oddy testing
N2 - Cellulose ethers, like methyl cellulose (MC) or hydroxypropyl cellulose (HPC), are widely used in conservation. They also occur as additives and rheology modifiers in various products like dispersions or gels. Do such products release harmful volatile organic compounds (VOC) during their accelerated aging? A mass testing series utilizing the Oddy test of 60 commercial cellulose ethers ranks the products in safe for permanent use (P, no corrosion), only for temporary use (T, slight corrosion), and unsuitable at all (F, heavy corrosion). Results show that 55% of the products passed the test whereas 33% are for temporary use as slight corrosion occurred on at least one metal coupon and only 11% failed the Oddy test. Raman measurements of the corrosion products identified oxides like massicot, litharge, cuprite, and tenorite among carbonates (hydrocerussite, plumbonacrite), and acetates like basic lead acetate, lead acetate trihydrate as well as lead formate as main phases. For example, commercial, industrial Klucel® G (HPC) scored a T rating through slight corrosion on the lead coupon. Basic lead acetate among other phases indicates the presence of acetic acid. Additional measurements of the sample with thermal desorption GC–MS utilizing the BEMMA scheme confirm the high acetic acid outgassing and reveal the presence of a small amount of formaldehyde.
KW - Cellulose ether
KW - Corrosion
KW - Oddy test
KW - VOC
KW - BEMMA
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547591
DO - https://doi.org/10.1186/s40494-022-00688-4
SN - 2050-7445
VL - 10
IS - 1
SP - 1
EP - 12
PB - Springer Open
AN - OPUS4-54759
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jovičević-Klug, Matic
A1 - Souza Filho, Isnaldi R.
A1 - Springer, Hauke
A1 - Adam, Christian
A1 - Raabe, Dierk
T1 - Green steel from red mud through climate-neutral hydrogen plasma reduction
N2 - AbstractRed mud is the waste of bauxite refinement into alumina, the feedstock for aluminium production1. With about 180 million tonnes produced per year1, red mud has amassed to one of the largest environmentally hazardous waste products, with the staggering amount of 4 billion tonnes accumulated on a global scale1. Here we present how this red mud can be turned into valuable and sustainable feedstock for ironmaking using fossil-free hydrogen-plasma-based reduction, thus mitigating a part of the steel-related carbon dioxide emissions by making it available for the production of several hundred million tonnes of green steel. The process proceeds through rapid liquid-state reduction, chemical partitioning, as well as density-driven and viscosity-driven separation between metal and oxides. We show the underlying chemical reactions, pH-neutralization processes and phase transformations during this surprisingly simple and fast reduction method. The approach establishes a sustainable toxic-waste treatment from aluminium production through using red mud as feedstock to mitigate greenhouse gas emissions from steelmaking.
KW - Multidisciplinary
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594424
DO - https://doi.org/10.1038/s41586-023-06901-z
SN - 0028-0836
VL - 625
IS - 7996
SP - 703
EP - 709
PB - Springer Science and Business Media LLC
AN - OPUS4-59442
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Maulas, Kryzzyl M.
A1 - Paredes, Charla S.
A1 - Tabelin, Carlito Baltazar
A1 - Jose, Mark Anthony
A1 - Opiso, Einstine M.
A1 - Arima, Takahiko
A1 - Park, Ilhwan
A1 - Mufalo, Walubita
A1 - Ito, Mayumi
A1 - Igarashi, Toshifumi
A1 - Phengsaart, Theerayut
A1 - Villas, Edrhea
A1 - Dagondon, Sheila L.
A1 - Metillo, Ephrime B.
A1 - Uy, Mylene M.
A1 - Manua, Al James A.
A1 - Villacorte-Tabelin, Mylah
T1 - Isolation and Characterization of Indigenous Ureolytic Bacteria from Mindanao, Philippines: Prospects for Microbially Induced Carbonate Precipitation (MICP)
N2 - Microbially induced carbonate precipitation (MICP), a widespread phenomenon in nature, is gaining attention as a low-carbon alternative to ordinary Portland cement (OPC) in geotechnical engineering and the construction industry for sustainable development. In the Philippines, however, very few works have been conducted to isolate and identify indigenous, urease-producing (ureolytic) bacteria suitable for MICP. In this study, we isolated seven, ureolytic and potentially useful bacteria for MICP from marine sediments in Iligan City. DNA barcoding using 16s rDNA identified six of them as Pseudomonas stutzeri, Pseudomonas pseudoalcaligenes, Bacillus paralicheniformis, Bacillus altitudinis, Bacillus aryabhattai, and Stutzerimonas stutzeri but the seventh was not identified since it was a bacterial consortium. Bio-cementation assay experiments showed negligible precipitation in the control (without bacteria) at pH 7, 8, and 9. However, precipitates were formed in all seven bacterial isolates, especially between pH 7 and 8 (0.7–4 g). Among the six identified bacterial species, more extensive precipitation (2.3–4 g) and higher final pH were observed in S. stutzeri, and B. aryabhattai, which indicate better urease production and decomposition, higher CO2 generation, and more favorable CaCO3 formation. Characterization of the precipitates by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) and attenuated total reflectance Fourier transform spectroscopy (ATR-FTIR) confirmed the formation of three carbonate minerals: calcite, aragonite, and vaterite. Based on these results, all six identified indigenous, ureolytic bacterial species from Iligan City are suitable for MICP provided that the pH is controlled between 7 and 8. To the best of our knowledge, this is the first report of the urease-producing ability and potential for MICP of P. stutzeri, P. pseudoalcaligenes, S. stutzeri, and B. aryabhattai.
KW - Calcium carbonate
KW - Microbially induced carbonate precipitation (MICP)
KW - Ureolytic bacteria
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600888
DO - https://doi.org/10.3390/min14040339
VL - 14
IS - 4
SP - 1
EP - 15
PB - MDPI
AN - OPUS4-60088
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kromer, C.
A1 - Schwibbert, Karin
A1 - Radunz, S.
A1 - Thiele, Dorothea
A1 - Laux, P.
A1 - Luch, A.
A1 - Tschiche, H.R.
T1 - ROS generating BODIPY loaded nanoparticles for photodynamic eradication of biofilms
N2 - Bacterial biofilms can pose a serious health risk to humans and are less susceptible
to antibiotics and disinfection than planktonic bacteria. Here, a novel method
for biofilm eradication based on antimicrobial photodynamic therapy utilizing
a nanoparticle in conjunction with a BODIPY derivative as photosensitizer was
developed. Reactive oxygen species are generated upon illumination with
visible light and lead to a strong, controllable and persistent eradication of
both planktonic bacteria and biofilms. One of the biggest challenges in biofilm
eradication is the penetration of the antimicrobial agent into the biofilm and
its matrix. A biocompatible hydrophilic nanoparticle was utilized as a delivery
system for the hydrophobic BODIPY dye and enabled its accumulation within the
biofilm. This key feature of delivering the antimicrobial agent to the site of action
where it is activated resulted in effective eradication of all tested biofilms. Here,
3 bacterial species that commonly form clinically relevant pathogenic biofilms
were selected: Escherichia coli, Staphylococcus aureus and Streptococcus
mutans. The development of this antimicrobial photodynamic therapy tool for
biofilm eradication takes a promising step towards new methods for the much
needed treatment of pathogenic biofilms.
KW - Biofilm
KW - Antimicrobials
KW - Photodynamic therapy
KW - BODIPY
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-587588
DO - https://doi.org/10.3389/fmicb.2023.1274715
SN - 1664-302X
VL - 14
SP - 1
EP - 15
AN - OPUS4-58758
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Protasov, E
A1 - Noah, J O
A1 - Kästle Silva, J O
A1 - Mies, U S
A1 - Hervé, V
A1 - Dietrich, C
A1 - Lang, K
A1 - Mikulski, L
A1 - Platt, K
A1 - Poehlein, A
A1 - Köhler-Ramm, T
A1 - Miambi, E
A1 - Boga, H I
A1 - Feldewert, C
A1 - Ngugi, G K
A1 - Plarre, Rüdiger
A1 - Sillam-Dussès, D
A1 - Šobotník, J
A1 - Daniel, R
A1 - Brune, A
T1 - Diversity and taxonomic revision of methanogens and other archaea in the intestinal tract of terrestrial arthropods
N2 - Methane emission by terrestrial invertebrates is restricted to millipedes, termites, cockroaches, and scarab beetles. The arthropod-associated archaea known to date belong to the orders Methanobacteriales, Methanomassiliicoccales, Methanomicrobiales, and Methanosarcinales, and in a few cases also to nonmethanogenic Nitrososphaerales and Bathyarchaeales. However, all major host groups are severely undersampled, and the taxonomy of existing lineages is not well developed. Full-length 16S rRNA gene sequences and genomes of arthropod-associated archaea are scarce, reference databases lack resolution, and the names of many taxa are either not validly published or under-classified and require revision. Here, we investigated the diversity of archaea in a wide range of methane-emitting arthropods, combining phylogenomic analysis of isolates and metagenome-assembled genomes (MAGs) with amplicon sequencing of full-length 16S rRNA genes. Our results allowed us to describe numerous new species in hitherto undescribed taxa among the orders Methanobacteriales (Methanacia, Methanarmilla, Methanobaculum, Methanobinarius, Methanocatella, Methanoflexus, Methanorudis, and Methanovirga, all gen. nova), Methanomicrobiales (Methanofilum and Methanorbis, both gen. nova), Methanosarcinales (Methanofrustulum and Methanolapillus, both gen. nova), Methanomassiliicoccales (Methanomethylophilaceae fam. nov., Methanarcanum, Methanogranum, Methanomethylophilus, Methanomicula, Methanoplasma, Methanoprimaticola, all gen. nova), and the new family Bathycorpusculaceae (Bathycorpusculum gen. nov.). Reclassification of amplicon libraries from this and previous studies using this new taxonomic framework revealed that arthropods harbor only CO2 and methyl-reducing hydrogenotrophic methanogens.
Numerous genus-level lineages appear to be present exclusively in arthropods,suggesting long evolutionary trajectories with their termite, cockroach, and millipede hosts, and a radiation into various microhabitats and ecological nichesprovided by their digestive tracts (e.g., hindgut compartments, gut wall, or anaerobic protists). The distribution patterns among the different host groups are often complex, indicating a mixed mode of transmission and a parallel evolution of invertebrate and vertebrate-associated lineages.
KW - Nitrososphaerales
KW - Archaea
KW - Methanogens
KW - Gut microbiota
KW - Termites
KW - Cockroaches
KW - Millipedes
KW - Bathyarchaeia
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-588230
DO - https://doi.org/10.3389/fmicb.2023.1281628
SN - 1664-302X
VL - 14
SP - 1
EP - 21
PB - Frontiers
AN - OPUS4-58823
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dombinov, V.
A1 - Herzel, Hannes
A1 - Meiller, M.
A1 - Müller, F.
A1 - Willbold, S.
A1 - Zang, J. W.
A1 - da Fonseca-Zang, W. A.
A1 - Adam, Christian
A1 - Klose, H.
A1 - Poorter, H.
A1 - Jablonowski, N. D.
A1 - Schrey, S. D.
T1 - Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability
N2 - Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K2SO4, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
KW - Combustion and gasification
KW - Phosphate extractability and availability
KW - X-ray diffraction (XRD)
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567632
DO - https://doi.org/10.3389/fpls.2022.1041924
SN - 1664-462X
VL - 13
SP - 1
EP - 13
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-56763
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Valentin, Jules D. P.
A1 - Altenried, Stefanie
A1 - Varadarajan, Adithi R.
A1 - Ahrens, Christian H.
A1 - Schreiber, Frank
A1 - Webb, Jeremy S.
A1 - van der Mei, Henny C.
A1 - Ren, Qun
T1 - Identification of Potential Antimicrobial Targets of Pseudomonas aeruginosa Biofilms through a Novel Screening Approach
N2 - Pseudomonas aeruginosa is an opportunistic pathogen of considerable medical importance, owing to its pronounced antibiotic tolerance and association with cystic fibrosis and other life-threatening diseases. The aim of this study was to highlight the genes responsible for P. aeruginosa biofilm tolerance to antibiotics and thereby identify potential new targets for the development of drugs against biofilm-related infections. By developing a novel screening approach and utilizing a public P. aeruginosa transposon insertion library, several biofilm-relevant genes were identified. The Pf phage gene (PA0720) and flagellin gene (fliC) conferred biofilm-specific tolerance to gentamicin. Compared with the reference biofilms, the biofilms formed by PA0720 and fliC mutants were completely eliminated with a 4-fold-lower gentamicin concentration. Furthermore, the mreC, pprB, coxC, and PA3785 genes were demonstrated to play major roles in enhancing biofilm tolerance to gentamicin. The analysis of biofilm-relevant genes performed in this study provides important novel insights into the understanding of P. aeruginosa antibiotic tolerance, which will facilitate the detection of antibiotic resistance and the development of antibiofilm strategies against P. aeruginosa.
KW - Antimicrobial resistance
KW - Bacteria
KW - Biofilms
KW - Pseudomonas aeruginosa
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570205
DO - https://doi.org/10.1128/spectrum.03099-22
SP - 1
EP - 5
PB - ASM Journals
AN - OPUS4-57020
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Aumont, Cedric
A1 - Beránková, T.
A1 - McMahon, Dino Peter
A1 - Radek, R.
A1 - Akama, P. D.
A1 - Sillam-Dussès, D.
A1 - Sobotnik, J.
ED - Scholtz, G.
T1 - The ultrastructure of the rostral gland in soldiers of Verrucositermes tuberosus (Blattodea: Termitidae: Nasutitermitinae)
N2 - The soil-feeding habit is an evolutionary novelty found in some advanced groups of termites. The study of such groups is important to revealing interesting adaptations to this way-of-life. The genus Verrucositermes is one such example, characterized by peculiar outgrowths on the head capsule, antennae and maxillary palps, which are not found in any other termite. These structures have been hypothesized to be linked to the presence of a new exocrine organ, the rostral gland, whose structure has remained unexplored.
We have thus studied the ultrastructure of the epidermal layer of the head capsule of Verrucositermes tuberosus soldiers.We describe the ultrastructure of the rostral gland, which consists of class 3 secretory cells only. The dominant secretory organelles comprise rough endoplasmic reticulum and Golgi apparatus, which provide secretions delivered to the surface of the head, likely made of peptide-derived components of unclear function. We discuss a possible role of the rostral gland of soldiers as an adaptation to the frequent encounter with soil pathogens during search for new food resources.
KW - Soil-feeding habit
KW - Advanced groups of termites
KW - New exocrine organ
KW - Rostral gland
KW - Epidemal layer
KW - Peptide-derived components
PY - 2023
DO - https://doi.org/10.1016/j.asd.2023.101238
SN - 1467-8039
VL - 73
SP - 1
EP - 5
PB - Elsevier Ltd.
CY - London, UK
AN - OPUS4-57046
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ruyle, B.
A1 - Pickard, H.
A1 - Schultes, L.
A1 - Fredriksson, F.
A1 - Heffernan, A.
A1 - Knappe, D.
A1 - Lord, H.
A1 - Meng, P.
A1 - Mills, M.
A1 - Ndungu, K.
A1 - Roesch, Philipp
A1 - Rundberget, J.T.
A1 - Tettenhorst, D.
A1 - Van Buren, J.
A1 - Vogel, Christian
A1 - Westerman, D.
A1 - Yeung, L.
A1 - Sunderland, E.
T1 - Interlaboratory Comparison of Extractable Organofluorine Measurements in Groundwater and Eel (Anguilla rostrata): Recommendations for Methods Standardization
N2 - Research on per- and polyfluoroalkyl substances (PFAS) frequently incorporates organofluorine measurements, particularly because they could support a class-based approach to regulation. However, standardized methods for organofluorine analysis in a broad suite of matrices are currently unavailable, including a method for extractable organofluorine (EOF) measured using combustion ion chromatography (CIC). Here, we report the results of an international interlaboratory comparison. Seven laboratories representing academia, government, and the private sector measured paired EOF and PFAS concentrations in groundwater and eel (Anguilla rostrata) from a site contaminated by aqueous film-forming foam. Among all laboratories, targeted PFAS could not explain all EOF in groundwater but accounted for most EOF in eel. EOF results from all laboratories for at least one replicate extract fell within one standard deviation of the interlaboratory mean for groundwater and five out of seven laboratories for eel. PFAS spike mixture recoveries for EOF measurements in groundwater and eel were close to the criterion (±30%) for standardized targeted PFAS methods. Instrumental operation of the CIC such as replicate sample injections was a major source of measurement uncertainty. Blank contamination and incomplete inorganic fluorine removal may introduce additional uncertainties. To elucidate the presence of unknown organofluorine using paired EOF and PFAS measurements, we recommend that analysts carefully consider confounding methodological uncertainties such as differences in precision between measurements, data processing steps such as blank subtraction and replicate analyses, and the relative recoveries of PFAS and other fluorine compounds.
KW - Extractable organic fluorine
KW - Per- and Polyfluoroalkyl substances (PFAS)
KW - Combustion ion chromatography (CIC)
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-587726
DO - https://doi.org/10.1021/acs.est.3c04560
SN - 0013-936X
VL - 57
IS - 48
SP - 20159
EP - 20168
PB - American Chemical Society (ACS)
AN - OPUS4-58772
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jiang, Shixiong
A1 - Marco, H. G.
A1 - Scheich, Nina
A1 - He, S.
A1 - Wang, Z.
A1 - Gäde, G.
A1 - McMahon, Dino Peter
T1 - Comparative analysis of adipokinetic hormones and their receptors in Blattodea reveals novel patterns of gene evolution
N2 - Adipokinetic hormone (AKH) is a neuropeptide produced in the insect corpora cardiaca that plays an essential role in mobilising carbohydrates and lipids from the fat body to the haemolymph. AKH acts by binding to a rhodopsin-like G protein-coupled receptor (GPCR), the adipokinetic hormone receptor (AKHR). In this study, we tackle AKH ligand and receptor gene evolution as well as the evolutionary origins of AKH gene paralogues from the order Blattodea (termites and cockroaches). Phylogenetic analyses of AKH precursor sequences point to an ancient AKH gene duplication event in the common ancestor of Blaberoidea, yielding a new group of putative decapeptides. In total, 16 different AKH peptides from 90 species were obtained. Two octapeptides and seven putatively novel decapeptides are predicted for the first time. AKH receptor sequences from 18 species, spanning solitary cockroaches and subsocial wood roaches as well as lower and higher termites, were subsequently acquired using classical molecular methods and in silico approaches employing transcriptomic data. Aligned AKHR open reading frames revealed 7 highly conserved transmembrane regions, a typical arrangement for GPCRs.
Phylogenetic analyses based on AKHR sequences support accepted relationships among termite, subsocial (Cryptocercus spp.) and solitary cockroach lineages to a large extent, while putative post-translational modification sites do not greatly differ between solitary and subsocial roaches and social termites. Our study provides important information not only for AKH and AKHR functional research but also for further analyses interested in their development as potential candidates for biorational pest control agents against invasive termites and cockroaches.
KW - Adipokinetic hormone
KW - Adipokinetic hormone receptor
KW - ‘Green’ pesticide
KW - Neuropeptide
KW - Termite
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-579141
DO - https://doi.org/10.1111/imb.12861
SN - 0962-1075
SP - 1
EP - 19
PB - Wiley online library
CY - London, UK
AN - OPUS4-57914
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chacón, Luz
A1 - Kuropka, B.
A1 - González-Tortuero, E.
A1 - Schreiber, Frank
A1 - Rojas-Jiménez, K.
A1 - Rodríguez-Rojas, A.
T1 - Mechanisms of low susceptibility to the disinfectant benzalkonium chloride in a multidrug-resistant environmental isolate of Aeromonas hydrophila
N2 - Excessive discharge of quaternary ammoniumdisinfectants such as benzalkonium chloride (BAC) into aquatic systems can trigger several physiological responses in environmental microorganisms. In this study, we isolated a less-susceptible strain of Aeromonas hydrophila to BAC, designated as INISA09, froma wastewater treatment plant in Costa Rica. We characterized its phenotypic response upon exposure to three dierent concentrations of BAC and characterizedmechanisms related to its resistance using genomic and proteomic approaches. The genome of the strain, mapped against 52 dierent sequenced A. hydrophila strains, consists of approximately 4.6Mb with 4,273 genes. We found a massive genome rearrangement and thousands of missense mutations compared to the reference strain A. hydrophila ATCC 7966.
We identified 15,762 missense mutations mainly associated with transport, antimicrobial resistance, and outer membrane proteins.
In addition, a quantitative proteomic analysis revealed a significant upregulation of several efflux pumps and the downregulation of porins when the strain was exposed to three BAC concentrations.Other genes related tomembrane fatty acid metabolism and redox metabolic reactions also showed an altered expression.
Our findings indicate that the response of A. hydrophila INISA09 to BAC primarily occurs at the envelop level, which is the primary target of BAC. Our study elucidates the mechanisms of antimicrobial susceptibility in aquatic environments against a widely used disinfectant and will help better understand howbacteria can adapt to biocide pollution. To our knowledge, this is the first study addressing the resistance to BAC in an environmental A. hydrophila isolate. We propose that this bacterial species could also serve as a new model to study antimicrobial pollution in aquatic environments.
KW - Antimicrobial resistance
KW - Bacteria
KW - Disinfection
KW - Biocides
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-578555
DO - https://doi.org/10.3389/fmicb.2023.1180128
SN - 1664-302X
VL - 14
SP - 1
EP - 18
PB - Frontiers SA
CY - Lausanne
AN - OPUS4-57855
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zweigle, J.
A1 - Capitain, C.
A1 - Simon, Fabian Michael
A1 - Roesch, Philipp
A1 - Bugsel, B.
A1 - Zwiener, C.
T1 - Non-extractable PFAS in functional textiles − Characterization by complementary methods: oxidation, hydrolysis, and fluorine sum parameters
N2 - Per- and polyfluoroalkyl substances (PFAS) are widely used for durable water-repellent finishing of different fabrics and textiles like outdoor clothing, carpets, medical textiles and more. Existing PFAS extraction techniques followed by target analysis are often insufficient in detecting widely used side-chain fluorinated polymers (SFPs) that are barely or non-extractable. SFPs are typically copolymers consisting of a non-fluorinated backbone with perfluoroalkyl side-chains to obtain desired properties. We compared the accessible analytical information and performance of complementary techniques based on oxidation (dTOP assay, PhotoTOP), hydrolysis (THP assay), standard extraction, extractable organic fluorine (EOF), and total fluorine (TF) with five functional textiles and characterized 7 further textiles only by PhotoTOP oxidation. The results show that when applied directly to textile samples, oxidation by dTOP and PhotoTOP and also hydrolysis by the THP are able to capture large fractions of the TF in form of perfluoroalkyl side-chains present in the textiles while methods relying on extracts (EOF, target and non-target analysis) were much lower (e.g., factor ~25-50 lower). The conversion of large fractions of the measured TF into PFCAs or FTOHs from fluorinated side chains is in contrast to previous studies. Concentrations ranged from 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
KW - Industrial and Manufacturing Engineering
KW - Strategy and Management
KW - General Environmental Science
KW - Renewable Energy, Sustainability and the Environment
KW - Building and Construction
KW - Calcium sulfate
KW - Gypsum
KW - Bassanite
KW - Scattering
KW - Raman
KW - In situ
KW - Synchrotron
KW - BESSY
KW - MySpot
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594698
UR - https://www.sciencedirect.com/science/article/pii/S0959652624004591#appsec1
DO - https://doi.org/10.1016/j.jclepro.2024.141012
SN - 0959-6526
VL - 440
SP - 1
EP - 12
PB - Elsevier B.V.
AN - OPUS4-59469
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Liu, Xiangju
A1 - Huang, Yanliang
A1 - Li, Jianzheng
A1 - Yang, Dan
A1 - Xu, Yong
A1 - Kunte, Hans-Jörg
T1 - Effect of microbial hydrogen consumption on the hydrogen permeation behaviour of AISI 4135 steel under cathodic protection
N2 - The feasibility of microbial hydrogen consumption to mitigate the hydrogen embrittlement (HE) under different cathodic potentials was evaluated using the Devanathan-Stachurski electrochemical test and the hydrogen permeation efficiency h. The hydrogen permeation efficiency h in the presence of strain GA-1 was lower than that in sterile medium. The cathodic potential inhibited the adherence of strain GA-1 to AISI 4135 steel surface, thereby reducing the hydrogen consumption of strain GA-1. The adherent GA-1 cells were capable of consuming ‘cathodic hydrogen’ and reducing the proportions of absorbed hydrogen, indicating that it is theoretically possible to control HE by hydrogen-consuming microbes.
KW - Energy Engineering and Power Technology
KW - Condensed Matter Physics
KW - Fuel Technology
KW - Renewable Energy, Sustainability and the Environment
PY - 2020
DO - https://doi.org/10.1016/j.ijhydene.2019.12.058
SN - 1879-3487
VL - 45
IS - 7
SP - 4054
EP - 4064
PB - Elsevier BV
CY - New York, NY
AN - OPUS4-59319
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Huang, Yanliang
A1 - Liu, Xiangju
A1 - Zhang, Qichao
A1 - Xu, Yong
A1 - Kunte, Hans-Jörg
A1 - De Marco, Roland
T1 - Hydrogen release from carbon steel in chloride solution under anodic polarization
N2 - The hydrogen permeation current increase was noticed for carbon steel in 0.5 mol/L NaCl solution under strong anodic potentials, which is contrary to the common understanding. Hydrogen permeation under cathodic potentials has been widely studied because of possible hydrogen embrittlement failures of high strength steels in seawater, but investigations of anodic polarization on hydrogen permeation are fairly rare, as the hydrogen evolution reaction shall be retarded. To corroborate the observed phenomenon, experiments were conducted using both as-received and vacuum-annealed sheet specimens. It was verified that the observed phenomena originated from the released hydrogen in traps by metal dissolution under anodic polarization.
KW - Energy Engineering and Power Technology
KW - Condensed Matter Physics
KW - Fuel Technology
KW - Renewable Energy, Sustainability and the Environment
PY - 2020
DO - https://doi.org/10.1016/j.ijhydene.2019.11.218
SN - 1879-3487
VL - 45
IS - 4
SP - 3307
EP - 3315
PB - Elsevier BV
CY - New York, NY
AN - OPUS4-59322
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mrkwitschka, Paul
A1 - Rühle, Bastian
A1 - Kuchenbecker, Petra
A1 - Löhmann, Oliver
A1 - Lindemann, Franziska
A1 - Hodoroaba, Vasile-Dan
T1 - Embedding and cross-sectioning as a sample preparation procedure for accurate and representative size and shape measurement of nanopowders
N2 - Reliable measurement of the size of polydisperse, complex-shaped commercial nanopowders is a difficult but necessary task, e.g., for regulatory requirements and toxicity risk assessment. Suitable methods exist for the accurate characterization of the size of non-aggregated, stabilized, spherical and monodisperse nanoparticles. In contrast, industrial nanoscale powders usually require dedicated sample preparation procedures developed for the analysis method of choice. These nano-powders tend to agglomerate and/or aggregate, a behavior which in combination with an innate broad particle size distribution and irregular shape often significantly alters the achievable accuracy of the measured size parameters. The present study systematically tests two commercially available nanoscale powders using different sample preparation methods for correlative analysis by scanning electron microscopy, dynamic light scattering, Brunauer–Emmet–Teller method and differential mobility analysis. One focus was set on the sample preparation by embedding nanoparticles in carbon-based hot-mounting resin. Literature on this topic is scarce and the accuracy of the data extracted from cross sections of these particles is unclearly stated. In this paper systematic simulations on the deviation of the size parameters of well-defined series of nanoparticles with different shapes from the nominal value were carried out and the contributing factors are discussed.
KW - Nanopowder
KW - Electron microscopy
KW - Sample preparation
KW - Cross-sectioning
KW - Cerium oxide
KW - Zinc oxide
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-593289
DO - https://doi.org/10.1038/s41598-023-51094-0
SN - 2045-2322
VL - 14
SP - 1
EP - 10
PB - Springer Nature
CY - London
AN - OPUS4-59328
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schraut, Katharina
A1 - Adamczyk, Burkart
A1 - Adam, Christian
A1 - Stephan, Dietmar
A1 - Meng, Birgit
A1 - Simon, Sebastian
A1 - von Werder, Julia
A1 - Hirsch, Tamino
A1 - Manninger, Tanja
T1 - Effect of gypsum on the hydration of fused cement clinker from basic oxygen furnace slag
N2 - Fused cement clinker can be produced from molten basic oxygen furnace slag (BOFS) by way of a reductive thermochemical treatment. During the thermochemical treatment, oxidic iron is reduced to metallic iron and separated. The resulting low-iron slag has a chemical and mineralogical composition similar to ordinary Portland cement (OPC) clinker. In this study, the hydraulic reactivity of the fused clinker from BOFS with and without gypsum was investigated using isothermal calorimetry, differential scanning calorimetry, in situ X-ray diffraction and powder X-ray diffraction. Furthermore, a synthetic fused clinker without foreign ions and fused clinker produced by a mixture of both materials was studied. The hydraulic reaction of the fused clinker from BOFS was considerably slower than that of OPC. However, the reaction can be accelerated by adding gypsum as a sulfate carrier. Furthermore, the results showed an increased reaction rate with decreasing content of foreign ions such as Fe, P or Mn.
KW - General Materials Science
KW - Building and Construction
PY - 2024
DO - https://doi.org/10.1680/jadcr.23.00070
SN - 0951-7197
SP - 1
EP - 19
PB - Telford
AN - OPUS4-59391
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hamann, Christopher
A1 - Piehl, Patrick
A1 - Weingart, Eric
A1 - Stolle, Dirk
A1 - Al-Sabbagh, Dominik
A1 - Ostermann, Markus
A1 - Auer, Gerhard
A1 - Adam, Christian
T1 - Selective removal of zinc and lead from electric arc furnace dust by chlorination–evaporation reactions
N2 - Re-melting of scrap in an electric arc furnace (EAF) results in the accumulation of filter dust from off-gas treatment that predominantly consists of iron and zinc oxides. Filter dust is classified as hazardous waste due to its high contents of potentially toxic or ecotoxic elements such as Pb, Cr, Cd, and As. A promising processing route for this waste is selective chlorination, in which the non-ferrous metal oxides are chlorinated and selectively evaporated in form of their respective chlorides from the remaining solids via the process gas flow. Here, we investigate stepwise thermochemical treatment of EAF dust with either waste iron(II) chloride solution or hydrochloric acid at 650, 800, and 1100 ◦C. The Zn and Pb contents of the thermochemically processed EAF dust could be lowered from 29.9% and 1.63% to 0.09% and 0.004%, respectively. Stepwise heating allowed high separation between zinc chloride at the 650 ◦C step and sodium-, potassium-, and lead-containing chlorides at higher temperatures. Furthermore, the lab-scale results were transferred to the use of an experimental rotary kiln highlighting the possibilities of upscaling the presented process. Selective chlorination of EAF dust with liquid chlorine donors is, therefore, suggested as a potential recycling method for Zn-enriched steelworks dusts.
KW - Electric arc furnace dust
KW - Zinc
KW - Selective Chlorination
KW - Hazardous waste
KW - Resource Recovery
PY - 2024
DO - https://doi.org/10.1016/j.jhazmat.2023.133421
SN - 0304-3894
VL - 465
SP - 1
EP - 13
PB - Elsevier
AN - OPUS4-59345
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Even, Morgane
A1 - Juritsch, Elevtheria
A1 - Richter, Matthias
T1 - On the use of Carbograph 5TD as an adsorbent for sampling VVOCs: validation of an analytical method
N2 - A standardised method for the analysis of very volatile organic compounds (VVOCs) in indoor air is still missing. This study evaluates the use of Carbograph 5TD as an adsorbent for 60 compounds (47 VVOCs + 13 VOCs) by comparing their recoveries with different spiking modes. The influence of the spiking of the tubes in dry nitrogen, humidified air or along the whole flushing duration mimicking real sampling was investigated. 49 substances (36 VVOCs from C1 to C6) had recoveries over 70% on the adsorbent in humidified air and were validated. The linearity of the calibration curves was verified for every spiking mode and the limits of detection (LOD) and quantification (LOQ) were determined. The LOQs were lower than the existing indoor air guideline values. The robustness of the method was considered by studying the influence of the sampling volume, the sampling flow rate, the humidity level and the storage of the tubes. In general, the most volatile or polar substances were the less robust ones. The combined measurement uncertainty was calculated and lies below 35% for a vast majority of the substances. An example of an emission chamber test using polyurethane foam is shown: Carbograph 5TD performs much better than Tenax® TA for VVOCs and emissions from n-butane were quantified with combined measurement uncertainty.
KW - VVOC
KW - Gas chromatography
KW - Thermal desorption
KW - Air sampling
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-581113
DO - https://doi.org/10.1039/D3AY00677H
VL - 15
IS - 31
SP - 3810
EP - 3821
AN - OPUS4-58111
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mazumdar, Tilomatta
A1 - Bartholomäus, A.
A1 - McMahon, Dino Peter
ED - Rokas, A.
T1 - Draft Genome of the Entomopathogenic Fungus Metarhizium robertsii DSM 1490
N2 - Metarhizium robertsii DSM 1490 is a generalist entomopathogenic fungus.
The mechanisms of pathogenesis of such fungi in insects like termites are not completely understood. Here, we report the draft genome sequence, as sequenced on the Oxford Nanopore platform. The genome has a GC% of 47.82 and a size of 45,688,865 bp
KW - Draft Genome
KW - Entomopathogenic Fungus
KW - Metarhizium robertsii DSM 1490
KW - Mechanisms of pathogenesis
KW - Infecting a number of insects,
KW - Close proximity to colonies
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-573186
DO - https://doi.org/10.1128/mra.01267-22
SN - 2576-098X
VL - 2023
SP - 1
EP - 2
PB - ASM Journals
CY - Nashville, USA
AN - OPUS4-57318
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Heisterkamp, I.
A1 - Gartiser, S.
A1 - Schoknecht, Ute
A1 - Happel, O.
A1 - Kalbe, Ute
A1 - Kretzschmar, M.
A1 - Ilvonen, O.
T1 - Investigating the ecotoxicity of construction product eluates as multicomponent mixtures
N2 - The release of hazardous compounds from construction products can harm human health and the environment. To improve the sustainability of construction materials, the leaching of substances from construction products and their potential environmental impact should be assessed. Twenty-seven construction products from different product groups were examined with a combination of standardized leaching tests (dynamic surface leaching test and percolation test) and biotests (algae, daphnia, fish egg, luminescent bacteria, umu and Ames fluctuation tests). To identify the released substances, extensive qualitative and quantitative chemical analyses were performed, including gas chromatographic and liquid chromatographic screening techniques.
Results: Many of the tested eluates caused signifcant ecotoxic efects. Particularly high ecotoxicities were observed for grouts (lowest ineffective dilution (LID) up to 16384) and cork granules (LID up to 24578). The results of ecotoxicity tests allow the prioritization of the eluates that should be subjected to detailed chemical analyses. Organic screening by different methods and ranking the identifed substances based on recorded hazard classification is a suitable approach to identify the relevant toxic substances.
Conclusions: Determining the ecotoxicity of eluates from construction products records the summary effect of all leachable substances. This instrument is especially useful for construction products of complex and largely unknown composition. The ecotoxicological and the chemical–analytical approach complement each other in an ideal way to characterize the potential hazard of eluates from construction products and to identify the environmentally hazardous components in these eluates. Our results confirm that the proposed harmonized methods for testing eluate toxicity are an adequate and applicable procedure to move toward a more sustainable way of building and to reduce toxic effects of construction products in their use phase in the environment.
KW - Construction products
KW - Building materials
KW - Ecotoxicity
KW - Biotests
KW - Leaching
KW - Eluates
KW - Chemical analysis
KW - Analytical screening techniques
KW - Mixture toxicity
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-568864
DO - https://doi.org/10.1186/s12302-023-00711-w
VL - 35
IS - 1
SP - 1
EP - 20
PB - Springer
AN - OPUS4-56886
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Herbig, B.
A1 - Jörres, R. A.
A1 - Schierl, R.
A1 - Simon, M.
A1 - Langner, Jeanette
A1 - Seeger, Stefan
A1 - Nowak, D.
A1 - Karrasch, S.
T1 - Psychological and cognitive effects of laser printer emissions: A controlled exposure study
N2 - The possible impact of ultrafine particles from laser printers on human health is controversially discussed although there are persons reporting substantial symptoms in relation to these emissions. A randomized, single-blinded, cross-over experimental design with two exposure conditions (high-level and low-level exposure) was conducted with 23 healthy subjects, 14 subjects with mild asthma, and 15 persons reporting symptoms associated with laser printer emissions. To separate physiological and psychological effects, a secondary physiologically based categorization of susceptibility to particle effects was used. In line with results from physiological and biochemical assessments, we found no coherent, differential, or clinically relevant effects of different exposure conditions on subjective complaints and cognitive performance in terms of attention, short-term memory, and psychomotor performance. However, results regarding the psychological characteristics of participants and their situational perception confirm differences between the participants groups: Subjects reporting symptoms associated with laser printer emissions showed a higher psychological susceptibility for adverse reactions in line with previous results on persons with multiple chemical sensitivity or idiopathic environmental intolerance. In conclusion, acute psychological and cognitive effects of laser printer emissions were small and could be attributed only to different participant groups but not to differences in exposure conditions in terms of particle number concentrations.
KW - Cognitive performance
KW - Exposure
KW - Idiopathic environmental intolerance
KW - Laser printer emission
KW - Multiple chemical sensitivity
KW - Subjective complaints
PY - 2018
DO - https://doi.org/10.1111/ina.12429
SN - 1600-0668
SN - 0905-6947
VL - 28
IS - 1
SP - 112
EP - 124
PB - John Wiley & Sons, Inc.
CY - 111 RIVER ST, HOBOKEN 07030-5774, NJ USA
AN - OPUS4-43945
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Even, Morgane
A1 - Wilke, Olaf
A1 - Kalus, Sabine
A1 - Schultes, P.
A1 - Hutzler, C.
A1 - Luch, A.
T1 - Formaldehyde emissions from wooden toys: Comparison of different measurement methods and assessment of exposure
N2 - Formaldehyde is considered as carcinogenic and is emitted from particleboards and plywood used in toy manufacturing. Currently, the flask method is frequently used in Europe for market surveillance purposes to assess formaldehyde release from toys, but its concordance to Levels measured in emission test chambers is poor. Surveillance laboratories are unable to afford laborious and expensive emission chamber testing to comply with a new amendment of the European Toy Directive; they need an alternative method that can provide reliable results. Therefore, the application of miniaturised emission test chambers was tested. Comparisons between a 1 m3 emission test chamber and 44 mL microchambers with two particleboards over 28 days and between a 24 L desiccator chamber and the microchambers with three puzzle samples over 10 days resulted in a correlation coefficient r2 of 0.834 for formaldehyde at steady state. The correlation between the results obtained in microchambers vs. flask showed a high variability over 10 samples (r2: 0.145),
thereby demonstrating the error-proneness of the flask method in comparison to methods carried out under ambient parameters. An exposure assessment was also performed for three toy puzzles: indoor formaldehyde concentrations caused by puzzles were not negligible (up to 8 µg/m3), especially when more conservative exposure scenarios were considered.
KW - EN 717-3
KW - Formaldehyde
KW - Wooden toys
KW - Emission test chamber
KW - Flask method
KW - Microchamber
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520196
DO - https://doi.org/10.3390/ma14020262
VL - 14
IS - 2 (Special issue: Measurement of the environmental impact of materials)
SP - 262-1
EP - 262-16
PB - MDPI
AN - OPUS4-52019
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wilke, Olaf
A1 - Horn, Wolfgang
A1 - Richter, Matthias
A1 - Jann, Oliver
T1 - Volatile organic compounds from building products - Results from six round robin tests with emission test chambers conducted between 2008 and 2018
N2 - Emission testing of volatile organic compounds (VOC) from materials and products is commonly based on emission test chamber measurements. To ensure the comparability of results from different testing laboratories, their measurement performance must be verified. For this purpose, Bundesanstalt für Materialforschung und -prüfung (BAM) organizes an international proficiency test (round robin test, RRT) every two years using well-characterized test materials (one sealant, one furniture board, and four times a lacquer) with defined VOC emissions. The materials fulfilled the requirements of homogeneity, reproducibility, and stability. Altogether, 36 VOCs were included of which 33 gave test chamber air concentrations between 13 and 83 µg/m3. This is the typical concentration range to be expected and to be quantified when performing chamber tests. Three compounds had higher concentrations between 326 and 1105 µg/m3. In this paper, the relative standard deviations (RSD) of BAM round robin tests since 2008 are compared and the improvement of the comparability of the emission chamber testing is shown by the decrease of the mean RSD down to 28 % in 2018. In contrast, the first large European interlaboratory comparison in 1999 showed a mean RSD of 51 %.
KW - Construction product
KW - Emission test chamber
KW - Interlaboratory comparison
KW - Proficiency testing
KW - Rround robin test
KW - VOC emission
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-526139
DO - https://doi.org/10.1111/ina.12848
VL - 31
IS - 6
SP - 2049
EP - 2057
PB - Wiley
AN - OPUS4-52613
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - de Krom, I.
A1 - Heikens, D.
A1 - Horn, Wolfgang
A1 - Wilke, Olaf
A1 - Richter, Matthias
A1 - Baldan, A.
T1 - Metrological generation of SI-traceable gas-phase standards and reference materials for (semi-) volatile organic compounds
N2 - EN 16516 sets specifications for the determination of emissions into indoor air from construction products. Reliable, accurate and International System of Unit (SI)-traceable measurement results of the emissions are the key to consumer protection. Such measurement results can be obtained by using metrologically traceable reference materials. Gas-phase standards of volatile organic compounds (VOCs) in air can be prepared by a variety of dynamic methods according to the ISO 6145 series. However, these methods are not always applicable for semi-VOCs (SVOCs) due to their high boiling point and low vapour pressure. Therefore, a novel dynamic gas mixture generation system has been developed. With this system gas-phase standards with trace level VOCs and SVOCs in air can be prepared between 10 nmol mol−1 and 1000 nmol mol−1. The VOCs and SVOCs in this study have normal boiling points ranging from 146 °C to 343 °C. Metrologically traceable reference materials of the gas-phase standard were obtained by sampling of the VOC gas-phase standard into Tenax TA® sorbent material in SilcoNert® coated stainless steel tubes. Accurately known masses between 10 ng and 1000 ng per VOC were sampled. These reference materials were used to validate the dynamic system. Furthermore, the storage and stability periods of the VOCs in the reference materials were determined as these are crucial characteristics to obtain accurate and SI-traceable reference materials. In a round robin test (RRT), the reference materials were used with the aim of demonstrating the feasibility of providing SI-traceable standard reference values for SVOCs for interlaboratory comparison purposes. Based on the results from the validation, the storage and stability studies and the RRT, gas-phase standards and reference materials of VOCs and SVOCs with relative expanded uncertainties between 5% and 12% (k = 2) have been developed. These reference standards can be used as calibrants, reference materials or quality control materials for the analysis of VOC emissions.
KW - SVOC
KW - Dynamic calibration gas mixtures
KW - Reference materials
KW - Indoor air
KW - Thermal desorption
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-565978
DO - https://doi.org/10.1088/1361-6501/aca704
VL - 34
IS - 3
SP - 1
EP - 13
PB - IOP Publishing
AN - OPUS4-56597
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sanchez-Martin, Pedro
A1 - Becker, Roland
A1 - Toepel, J.
A1 - Gorbushina, Anna
T1 - An improved test for the evaluation of hydrocarbon degradation capacities of diesel-contaminating microorganisms
N2 - The development of a test to evaluate the degradation of semi-volatile fuels as diesel by microorganisms is presented. This method is based on the principles described in the CEC-L-103 Standard procedure that is exclusively meant for testing the biodegradability of non-volatile lubricants. Therefore, significant modifications involve aseptic conditions for testing specific microorganisms and conducting the test in closed vessels avoiding evaporation losses, while fuel quantification using gas chromatography-flame ionization detection (GC-FID) is retained. It is suggested that the modified procedure should enable routine application for semi-volatile hydrocarbon-based fuels. GC-FID provides additionally valuable information on the alteration of fuel component patterns during biodegradation. The procedure was successfully tested using two bacteria (Pseudomonas aeruginosa and Sphingomonas sp.) and two yeasts (Moesziomyces sp. and Candida sp.) isolated from real diesel contamination cases. All tested microorganisms caused a significant degradation of diesel fuel achieving hydrocarbon degradation percentages ranging from 23% to 35%. Specific aspects on the test modification and prospects for further modification regarding targeted investigations in the field of fuel contamination by microorganisms are briefly discussed.
KW - Biofouling
KW - Bacteria
KW - Fungi
KW - CEC-L-103
KW - GC-FID
KW - Reference organisms
PY - 2018
DO - https://doi.org/10.1016/j.ibiod.2018.01.009
SN - 0964-8305
VL - 129
SP - 89
EP - 94
PB - Elsevier
AN - OPUS4-44524
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Becker, Roland
A1 - Scholz, Philipp
A1 - Jung, Christian
A1 - Weidner, Steffen
T1 - Thermo-Desorption Gas Chromatography-Mass Spectrometry for investigating the thermal degradation of polyurethanes
N2 - Thermo-Desorption Gas Chromatography-Mass Spectrometry (TD-GC-MS) was used to investigate the thermal degradation of two different polyurethanes (PU). PU samples were heated at different heating rates and the desorbed products were collected in a cold injection system and thereafter submitted to GC-MS. Prospects and limitations of the detection and quantification of semi-volatile degradation products were investigated. A temperature dependent PU depolymerization was
found at temperatures above 200 °C proved by an increasing release of 1,4-butanediol and methylene diphenyl diisocyanate (MDI) representing the main building blocks of both polymers. Their release was monitored quantitatively based on external calibration with authentic compounds. Size Exclusion Chromatography (SEC) of the residues obtained after thermodesorption confirmed the initial competitive degradation mechanism indicating an equilibrium of crosslinking and depolymerization as previously suggested. Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry of SEC fractions of thermally degraded PUs provided additional hints on degradation mechanism.
KW - Thermo-desorption
KW - Mass spectrometry
KW - Polyurethanes
KW - Thermal degradation
PY - 2023
DO - https://doi.org/10.1039/D3AY00173C
SN - 1759-9660
SP - 1
EP - 6
PB - Royal Society for Chemistry
AN - OPUS4-57307
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Cunliffe, A. J.
A1 - Askew, P. D.
A1 - Stephan, Ina
A1 - Iredale, G.
A1 - Cosemans, P.
A1 - Simmons, L. M.
A1 - Verran, J.
A1 - Redfern, J.
T1 - How do we determine the efficacy of an antibacterial surface? A review of standardised antibacterial material testing methods
N2 - Materials that confer antimicrobial activity, be that by innate property, leaching of biocides or design features (e.g., non-adhesive materials) continue to gain popularity to combat the increasing and varied threats from microorganisms, e.g., replacing inert surfaces in hospitals with copper. To understand how efficacious these materials are at controlling microorganisms, data is usually collected via a standardised test method. However, standardised test methods vary, and often the characteristics and methodological choices can make it difficult to infer that any perceived antimicrobial activity demonstrated in the laboratory can be confidently assumed to an end-use setting. This review provides a critical analysis of standardised methodology used in academia and industry, and demonstrates how many key methodological choices (e.g., temperature, humidity/moisture, airflow, surface topography) may impact efficacy assessment, highlighting the need to carefully consider intended antimicrobial end-use of any product.
KW - Antimicrobial materials
KW - Antimicrobial testing
KW - ISO 22196
KW - Antimicrobial surfaces
KW - Antibacterial coatings
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-532138
DO - https://doi.org/10.3390/antibiotics10091069
SN - 2079-6382
VL - 10
IS - 9
SP - 1
EP - 14
PB - MDPI
CY - Basel
AN - OPUS4-53213
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Stephan, Ina
A1 - Dimke, Thomas
A1 - Guterman, R.
A1 - Smith, C. A.
A1 - Cataldo, V. A.
T1 - Antibacterial and degradable thioimidazolium poly(ionic liquid)
N2 - New antibacterial agents are urgently required to fight the emergence of antibiotic-resistant bacteria. We recently synthesized the first thioimidazolium ionene, which has antibacterial properties and can degrade in various media. This dual functionality is crucial in order to limit the environmental impact of these biocides. We have found that our polymer is stronger than benzalkonium chloride (BAC) against Pseudomonas aeruginosa and also readily degrades in the presence of base, while remaining stable in acidic environments. These results highlight a new emerging class of antibacterial degradable polymers.
KW - Ionic liquid
KW - Antibacterial polymer
KW - Amphiphilic polymer
KW - Thioimidazolium
KW - Degradable polymer
KW - Polyioinic liquid
PY - 2020
DO - https://doi.org/10.1021/acssuschemeng.0c02666
VL - 8
IS - 22
SP - 8419
EP - 8424
PB - ACS Publications
AN - OPUS4-50982
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Usmani, S.
A1 - Voss, L.
A1 - Stephan, Ina
A1 - Hübert, Thomas
A1 - Kemnitz, E.
T1 - Improved Durability of Wood Treated with Nano Metal Fluorides against Brown-Rot and White-Rot Fungi
N2 - Low-water soluble metal fluorides such as magnesium fluoride (MgF2) and calcium Fluoride (CaF2) were evaluated for decay protection of wood. Initially, the biocidal efficacy of nano metal fluorides (NMFs) against wood destroying fungi was assessed with an in-vitro agar test. The results from the test showed that agar medium containing MgF2 and CaF2 was more efficient in preventing fungal decay than stand-alone MgF2 or CaF2. These metal fluorides, in their nanoscopic form synthesized using fluorolytic sol-gel synthesis, were introduced into the sapwood of Scots pine and beech wood and then subjected to accelerated ageing by leaching (EN 84). MAS 19F NMR and X-ray micro CT images showed that metal fluorides were present in treated wood, unleached and leached. Decay resistance of Scots pine and beech wood treated with NMFs was tested against Wood destroying fungi Rhodonia placenta and Trametes versicolor in accordance with EN 113. Results revealed that mass losses were reduced to below 3% in wood treated with the combination of MgF2 and CaF2.
It is concluded that NMFs provide full protection to wood even after it has been leached and can be used as wood preservatives in outdoor environments.
KW - Nanoparticles
KW - Fluoride
KW - Wood protection
KW - Fluorolytic sol-gel synthesis
KW - Brown-rot fungi
KW - White-rot fungi
KW - Basidiomycetes
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543877
DO - https://doi.org/10.3390/app12031727
VL - 12
IS - 3
SP - 1
EP - 11
PB - MDPI
AN - OPUS4-54387
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Redfern, J.
A1 - Tucker, J.
A1 - Simmons, L.
A1 - Askew, P.
A1 - Verran, J.
A1 - Stephan, Ina
T1 - Environmental and experimental factors affecting efficacy testing on nonporous plastic antimicrobial surfaces
N2 - Test methods for efficacy assessment of antimicrobial coatings are not modelled on a hospital environment, and instead use high humidity (>90%) high temperature (37 ◦C), and no airflow. Therefore, an inoculum will not dry, resulting in an antimicrobial surface exhibiting prolonged antimicrobial activity, as moisture is critical to activity. Liquids will dry quicker in a hospital ward, resulting in a reduced antimicrobial efficacy compared to the existing test, rendering the test results artificially favourable to the antimicrobial claim of the product. This study aimed to assess how hospital room environmental conditions can affect the drying time of an inoculum, and to use this data to inform test parameters for antimicrobial efficacy testing based on the hospital ward. The drying time of different droplet sizes, in a range of environmental conditions likely found in a hospital ward, were recorded (n = 630), and used to create a model to inform users of the experimental conditions required to provide a drying time similar to what can be expected in the hospital
ward. Drying time data demonstrated significant (p < 0.05) variance when humidity, temperature, and airflow were assessed. A mathematical model was created to select environmental conditions for in vitro antimicrobial efficacy testing. Drying time in different environmental conditions demonstrates that experimental set-ups affect the amount of time an inoculum stays wet, which in turn may affect the efficacy of an antimicrobial surface. This should be an important consideration for hospitals and other potential users, whilst future tests predict efficacy in the intended end-use environment.
KW - Method development
KW - Standardisation
KW - Antimicrobial test
KW - Environmental conditions
KW - Hospital premises
PY - 2018
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-472699
DO - https://doi.org/10.3390/mps1040036
SN - 2409-9279
VL - 1
IS - 4
SP - 36, 1
EP - 10
PB - MDPI
CY - Internet open accsess
AN - OPUS4-47269
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - He, Zhiming
A1 - Dechesne, Arnaud
A1 - Schreiber, Frank
A1 - Zhu, Yong-Guan
A1 - Larsson, Joakim
A1 - Smets, Barth
T1 - Understanding Stimulation of Conjugal Gene Transfer by Nonantibiotic Compounds: How Far Are We?
N2 - A myriad of nonantibiotic compounds is released into the environment, some of which may contribute to the dissemination of antimicrobial resistance by stimulating conjugation. Here, we analyzed a collection of studies to (i) identify patterns of transfer stimulation across groups and concentrations of chemicals, (ii) evaluate the strength of evidence for the proposed mechanisms behind conjugal stimulation, and (iii) examine the plausibility of alternative mechanisms. We show that stimulatory nonantibiotic compounds act at concentrations from 1/1000 to 1/10 of the minimal inhibitory concentration for the donor strain but that stimulation is always modest (less than 8-fold). The main proposed mechanisms for stimulation via the reactive oxygen species/SOS cascade and/or an increase in cell membrane permeability are not unequivocally supported by the literature. However, we identify the reactive oxygen species/SOS cascade as the most likely mechanism. This remains to be confirmed by firm molecular evidence. Such evidence and more standardized and high-throughput conjugation assays are needed to create technologies and solutions to limit the stimulation of conjugal gene transfer and contribute to mitigating global antibiotic resistance.
KW - Antibiotic resistance
KW - Horizontal gene transfer
KW - Conjugation
KW - Chemicals
PY - 2024
DO - https://doi.org/10.1021/acs.est.3c06060
SP - 1
EP - 14
PB - ACS Publications
AN - OPUS4-60105
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sichler, Theresa Constanze
A1 - Adam, Christian
A1 - Becker, Roland
A1 - Sauer, Andreas
A1 - Ostermann, Markus
A1 - Barjenbruch, M.
T1 - Phosphorus determination in sewage sludge: comparison of different aqua regia digestion methods and ICP-OES, ICP-MS and photometric determination
N2 - Phosphorus recycling from sewage sludge will be obligatory in Germany from 2029. Phosphorus content determination in sewage sludge is crucial to assess the prescribed recycling rates. Currently, German law regards sample preparation using aqua regia digestion in a microwave or under reflux conditions as well as instrumental phosphorus determination by ICP-OES, ICP-MS, or photometric determination with ammonium molybdate as equivalent. However, it is questionable whether these methods are indeed equivalent regarding phosphorus quantification in sludges near the limit of 20 g/kg for mandatory recycling. To answer this question, 15 sewage sludges of 11 different wastewater treatment plants were investigated with all permitted method (digestion and measurement) combinations. Moreover, one sewage sludge was also examined in an interlaboratory comparison (ILC) with 28 participants. This study shows that the above-mentioned methods differ in some cases significantly but across all method combinations and sludges, phosphorus recovery was between 80 and 121% after normalization to the grand mean (average of 15 sludges between 85 and 111%). The ILC and the examination of 15 sludges produced largely similar results. There is a tendency to higher phosphorus recovery after microwave digestion compared to reflux digestion and ICP-OES measurements determine higher phosphorus contents than ICP-MS and photometric phosphorus determination. As a result, the authors recommend ICP-OES determination of phosphorus in sewage sludge after microwave digestion.
KW - Sewage sludge
KW - ICP-OES
KW - Phosphous recovery
KW - ICP-MS
KW - Photometric P determination
KW - Interlaboratory comparison
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-558869
DO - https://doi.org/10.1186/s12302-022-00677-1
VL - 34
IS - 99
SP - 1
EP - 14
PB - Springer
AN - OPUS4-55886
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Lasota, S.
A1 - Horn, M.
A1 - Noll, M.
A1 - Stephan, Ina
A1 - Otto, W.
T1 - Copper in wood preservatives delayed wood decomposition and shifted soil fungal but not bacterial community composition
N2 - Copper-based fungicides are routinely used for wood and plant protection, which can lead to an enrichment of copper-tolerant microbial communities in soil. To investigate the effect of such wood preservatives on the soil fungal and bacterial community compositions, five different vineyard and fruit-growing soil environments were evaluated using incubation studies over time. Pine sapwood specimens were impregnated with either water or different biocide treatment solutions containing a mixture of copper, triazoles, and quaternary ammonium compounds (CuTriQAC), a mixture of triazoles and quaternary ammonium compounds (TriQAC), or copper alone (Cu). Specimens were incubated in soil from each sample site for 8, 16, 24, and 32 weeks. The effects of preservative treatment on the modulus of elasticity (MOE) of the wood specimens and on the soil fungal as well as bacterial community composition at the soil-wood interface were assessed by quantitative PCR and amplicon sequencing of the fungal internal transcribed spacer (ITS) region and bacterial 16S rRNA gene. Specimens impregnated with CuTriQAC and Cu showed decreased MOE and reduced fungal and bacterial copy numbers over time compared to those impregnated with water and TriQAC. Fungal but not bacterial community composition was significantly affected by wood preservative treatment. The relative abundance of members of the family Trichocomaceae compared to other genera increased in the presence of the Cu and CuTriQAC treatments at three sites, suggesting these to be Cu-tolerant fungi. In conclusion, the copper-containing treatments resulted in marginally increased MOE, lowered microbial gene copy numbers compared to those in the TriQAC and water treatments, and thus enhanced wood protection against soil microbial wood degradation
KW - 16S rRNA gene
KW - ITS region
KW - Amplicon sequencing
KW - Community composition
KW - Copper-based wood preservatives
KW - Soil incubation study
PY - 2019
DO - https://doi.org/10.1128/AEM.02391-18
SN - 1098-5336
SN - 0099-2240
VL - 85
IS - 4
SP - e02391-18, 1
EP - 13
PB - American Society for Microbiology
CY - Washington, DC
AN - OPUS4-47370
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Guterman, R.
A1 - Miao, H.
A1 - Cataldo, V. A.
A1 - Antonietti, M.
A1 - Dimke, Thomas
A1 - Stephan, Ina
T1 - Thioimidazolium salts as a platform for nonvolatile alkylators and degradable antiseptics
N2 - ABSTRACT: A collection of thioimidazolium salts were synthesized and used as a new class of nonvolatile alkylating agents. Their nonvolatility prevents exposure during use or handling and are thus drastically safer than conventional alkylating agents. We discovered that thioimidazolium Iodide salts cannot release volatile compounds in the solid state, but instead only decompose when molten. Since decomposition proceeds via alkyl iodide elimination, SN2 of iodide on the thioimidazolium cation is constrained in the solid state, and instead can occur only upon melting when ions are mobile. By smart design of these alkylators, the melting point and thus the decomposition temperature of these salts can be increased from 106 to 169 °C and release negligible volatile organic compounds prior to melting. Thioimidazolium-bis(trifluoromethanesulfonyl)imide (TFSI) ionic liquids act as a completely nonvolatile and air-stable TFSI-based alkylating agent and can be used for high-throughput Synthesis of TFSI ionic liquids without solvent. Alkyl groups from methyl to dodecyl can be transferred to a nucleophile and the product purified by sublimation of the thione byproduct, which can then be recycled. We also found that thioimidazolium salts with a dodecyl chain are bactericidal, yet can hydrolyze in water to form benign neutral products, and thus wont accumulate in the environment. These results demonstrate that thioimidazolium salts are a designable platform for the pursuit of safer and more environmentally friendly alkylating and antiseptic agents.
KW - Alkylating agents
KW - Decomposition point
KW - Melting point
KW - Nonvolatile
KW - One-step ionic liquids synthesis
KW - Antiseptic agents
PY - 2018
DO - https://doi.org/10.1021/acssuschemeng.8b03874
SN - 2168-0485
VL - 6
IS - 11
SP - 15434
EP - 15440
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-46904
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Brischke, C.
A1 - Bollmus, S.
A1 - Melcher, E.
A1 - Stephan, Ina
T1 - Biological durability and moisture ynamics of Dawn redwood (Metasequoia glyptostroboides) and Port Orford cedar (Chamaecyparis lawsoniana)
N2 - Numerous non-native tree species are given attention with respect to the reforestation of calamity areas in Europe. Among them, several species may form durable wood which can be used for outdoor applications, but differences in wood durability are expected between original and European growth sites. This study aimed at examining the biological durability against wooddestroying fungi and water permeability of German-grown Dawn redwood (Metasequoia glyptostroboides) and Port Orford cedar (Chamaecyparis lawsoniana). The heartwood of both wood species was assigned to durability class 4 (DC 4, less durable) in soil contact and DC 1–4 (very to less durable) against wood-destroying basidiomycetes. However, according to the Meyer-Veltrup model, their material resistance dose was notably higher compared to the reference species Norway spruce (Picea abies), and the resulting service life of above ground structures should be a multiple of the reference.
KW - Natural durability
KW - Fungal decay
KW - Moisture performance
KW - Permeability
KW - Resistance model
KW - Water uptake
PY - 2022
DO - https://doi.org/10.1080/17480272.2022.2101941
SN - 1748-0272
SP - 1
EP - 11
PB - Taylor & Francis
CY - London
AN - OPUS4-55490
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Franziska, Pietsch
A1 - Nordholt, Niclas
A1 - Heidrich, Gabriele
A1 - Schreiber, Frank
T1 - Prevalent Synergy and Antagonism Among Antibiotics and Biocides in Pseudomonas aeruginosa
N2 - Antimicrobials can exert specific physiological effects when used in combination that are different from those when applied alone. While combination effects have been extensively mapped for antibiotic-antibiotic combinations, the combination effects of antibiotics with antimicrobials used as biocides or antiseptics have not been systematically investigated. Here, we investigated the effects of combinations of antibiotics (meropenem, gentamicin, and ciprofloxacin) and substances used as biocides or antiseptics [octenidine, benzalkonium chloride, cetrimonium bromide, chlorhexidine, Povidone-iodine, silver nitrate (AgNO3), and Ag-nanoparticles] on the planktonic growth rate of Pseudomonas aeruginosa. Combination effects were investigated in growth experiments in microtiter plates at different concentrations and the Bliss interaction scores were calculated. Among the 21 screened combinations, we find prevalent combination effects with synergy occurring six times and antagonism occurring 10 times. The effects are specific to the antibiotic-biocide combination with meropenem showing a tendency for antagonism with biocides (6 of 7), while gentamicin has a tendency for synergy (5 of 7). In conclusion, antibiotics and biocides or antiseptics exert physiological combination effects on the pathogen P. aeruginosa. These effects have consequences for the efficacy of both types of substances and potentially for the selection of antimicrobial resistant strains in clinical applications with combined exposure (e.g., wound care and coated biomaterials).
KW - Synergy
KW - Antagonism
KW - Suppression
KW - Biocides
KW - Antibiotics
KW - Pseudomonas aeruginosa
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520845
DO - https://doi.org/10.3389/fmicb.2020.615618
VL - 11
SP - Article 615618
PB - Frontiers
CY - Lausanne
AN - OPUS4-52084
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tang, Chi-Long
A1 - Seeger, Stefan
T1 - Measurement of sub-4 nm particle emission from FFF-3D printing with the TSI Nano Enhancer and the Airmodus Particle Size Magnifier
N2 - The emission of ultrafine particles from small desktop Fused Filament Fabrication (FFF) 3D printers has been frequently investigated in the past years. However, the vast majority of FFF emission and exposure studies have not considered the possible occurrence of particles below the typical detection limit of Condensation Particle Counters and could have systematically underestimated the total particle emission as well as the related exposure risks. Therefore, we comparatively measured particle number concentrations and size distributions of sub-4 nm particles with two commercially available diethylene glycol-based instruments – the TSI 3757 Nano Enhancer and the Airmodus A10 Particle Size Magnifier. Both instruments were evaluated for their suitability of measuring FFF-3D printing emissions in the sub-4 nm size range while operated as a particle counter or as a particle size spectrometer. For particle counting, both instruments match best when the Airmodus system was adjusted to a cut-off of 1.5 nm. For size spectroscopy, both instruments show limitations due to either the fast dynamics or rather low levels of particle emissions from FFF-3D printing in this range. The effects are discussed in detail in this article. The findings could be used to implement sub-4 nm particle measurement in future emission or exposure studies, but also for the development of standard test protocols for FFF-3D printing emissions.
KW - Air pollution
KW - Ultrafine particles
KW - Sub-4nm particles
KW - FFF-3D printing
KW - Emission testing
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-595952
DO - https://doi.org/10.1080/02786826.2024.2320430
SN - 0278-6826
VL - 58
IS - 6
SP - 644
EP - 656
PB - Taylor & Francis
CY - London
AN - OPUS4-59595
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Seeger, Stefan
A1 - Osan, J.
A1 - Czömpöly, O.
A1 - Gross, A.
A1 - Stosnach, H.
A1 - Stabile, L.
A1 - Ochsenkuehn-Petropoulou, M.
A1 - Tsakanika, L.
A1 - Lymperopoulou, T.
A1 - Goddard, S.
A1 - Fiebig, M.
A1 - Gaie-Levrel, F.
A1 - Kayser, Y.
A1 - Beckhoff, B.
T1 - Quantification of Element Mass Concentrations in Ambient Aerosols by Combination of Cascade Impactor Sampling and Mobile Total Reflection X-ray Fluorescence Spectroscopy
N2 - Quantitative chemical analysis of airborne particulate matter (PM) is vital for the understanding of health effects in indoor and outdoor environments, as well as for enforcing EU air quality regulations. Typically, airborne particles are sampled over long time periods on filters, followed by lab-based analysis, e.g., with inductively coupled plasma mass spectrometry (ICP-MS). During the EURAMET EMPIR AEROMET project, cascade impactor aerosol sampling is combined for the first time with on-site total reflection X-ray fluorescence (TXRF) spectroscopy to develop a tool for quantifying particle element compositions within short time intervals and even on-site. This makes variations of aerosol chemistry observable with time resolution only a few hours and with good size resolution in the PM10 range. The study investigates the proof of principles of this methodological approach. Acrylic discs and silicon wafers are shown to be suitable impactor carriers with sufficiently smooth and clean surfaces, and a non-destructive elemental mass concentration measurement with a lower limit of detection around 10 pg/m3 could be achieved. We demonstrate the traceability of field TXRF measurements to a radiometrically calibrated TXRF reference, and the results from both analytical methods correspond satisfactorily.
KW - TXRF
KW - Reference method
KW - Cascade impactor
KW - Ambient aerosols
KW - Particles
KW - Air quality monitoring
KW - Element mass concentration
KW - Size resolved chemical composition
KW - Time resolved chemical composition
KW - ICP-MS
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521860
UR - http://www.aerometproject.com/
DO - https://doi.org/10.3390/atmos12030309
SN - 2073-4433
VL - 12
IS - 3
SP - 309
EP - 337
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-52186
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Horender, S.
A1 - Auderset, K.
A1 - Quincey, P.
A1 - Seeger, Stefan
A1 - Skov, S. N.
A1 - Dierschel, K.
A1 - Smith, T. O.M.
A1 - Williams, K.
A1 - Aegerter, C. C.
A1 - Kalbermatter, D. M.
A1 - Gaie-Levrel, F.
A1 - Vasilatou, K.
T1 - Facility for production of ambient-like model aerosols (PALMA) inthe laboratory: application in the intercomparison of automated PMmonitors with the reference gravimetric method
N2 - A new facility has been developed which allows for a stable and reproducible production of ambient-like model aerosols (PALMA) in the laboratory. The set-up consists of multiple aerosol generators, a custom-made flow tube homogeniser, isokinetic sampling probes, and a system to control aerosol temperature and humidity. Model aerosols containing elemental carbon, secondary organic matter from the ozonolysis of α-pinene, inorganic salts such as ammonium sulfate and ammonium nitrate, mineral dust particles,and water were generated under different environmental conditions and at different number and mass concentrations. The aerosol physical and chemical properties were characterised with an array of experimental methods, including scanning mobility particle sizing, ion chromatography, total reflection X-ray fluorescence spectroscopy and thermo-optical analysis. The facility is very versatile and can find applications in the calibration and performance characterisation of aerosol instruments monitoring ambient air. In this study, we performed, as proof of concept, an intercomparison of three different commercial PM (particulate matter) monitors (TEOM1405, DustTrak DRX 8533 and Fidas Frog) with the gravimetric reference method under three simulated environmental scenarios. The results are presented and compared to previous field studies. We believe that the laboratory-based method for simulating ambient aerosols presented here could provide in the future a useful alternative to time-consuming and expensive field campaigns, which are often required for instrument certification and calibration.
KW - Model aerosols
KW - Intercomparison
KW - PM monitors
KW - Aerosol gravimetry
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521342
DO - https://doi.org/10.5194/amt-14-1225-2021
VL - 14
IS - 2
SP - 1225
EP - 1238
PB - Copernicus Publications
AN - OPUS4-52134
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tang, Chi-Long
A1 - Seeger, Stefan
T1 - Systematic ranking of filaments regarding their particulate emissions during fused filament fabrication 3D printing by means of a proposed standard test method
N2 - The diversity of fused filament fabrication (FFF) filaments continues to grow rapidly as the popularity of FFF-3D desktop printers for the use as home fabrication devices has been greatly increased in the past decade. Potential harmful emissions and associated health risks when operating indoors have induced many emission studies. However, the lack of standardization of measurements impeded an objectifiable comparison of research findings. Therefore, we designed a chamber-based standard method, i.e., the strand printing method (SPM), which provides a standardized printing procedure and quantifies systematically the particle emission released from individual FFF-3D filaments under controlled conditions. Forty-four marketable filament products were tested. The total number of emitted particles (TP) varied by approximately four orders of magnitude (1E9 ≤ TP ≤ 1E13), indicating that origin of polymers, manufacturer-specific additives, and undeclared impurities have a strong influence. Our results suggest that TP characterizes an individual filament product and particle emissions cannot be categorized by the polymer type (e.g., PLA or ABS) alone. The user's choice of a filament product is therefore decisive for the exposure to released particles during operation. Thus, choosing a filament product awarded for low emissions seems to be an easily achievable preemptive measure to prevent health hazards.
KW - Emission test method
KW - FFF-printing
KW - Particle emission
KW - Indoor air quality
KW - FFF-filament
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545087
DO - https://doi.org/https://doi.org/10.1111/ina.13010
SN - 1600-0668
VL - 32
IS - 3
SP - 1
EP - 12
PB - Wiley
CY - Hoboken, New Jersey, USA
AN - OPUS4-54508
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tang, Chi-Long
A1 - Seeger, Stefan
A1 - Röllig, Mathias
T1 - Improving the comparability of FFF-3D printing emission data by adjustment of the set extruder temperature
N2 - Fused filament fabrication (FFF) is a material extrusion-based technique often used in desktop 3D printers. Polymeric filaments are melted and are extruded through a heated nozzle to form a 3D object in layers. The extruder temperature is therefore a key parameter for a successful print job but also one of the main emission driving factors as harmful pollutants (e.g., ultrafine particles) are formed by thermal polymer degradation. The awareness of potential health risks has increased the number of emission studies in the past years. However, studies usually refer their calculated emission data to the printer set extruder temperature for comparison purposes. In this study, we used a thermocouple and an infrared camera to measure the actual extruder temperature and found significant temperature deviations to the displayed set temperature among printer models. Our result shows that printing the same filament feedstocks with three different printer models and with identical printer set temperature resulted in a variation in particle emission of around two orders of magnitude. A temperature adjustment has reduced the variation to approx. one order of magnitude. Thus, it is necessary to refer the measured emission data to the actual extruder temperature as it poses a more accurate comparison parameter for evaluation of the indoor air quality in user scenarios or for health risk assessments.
KW - Ultrafine particles
KW - Infrared thermography
KW - Thermocouple
KW - Indoor air quality
KW - FFF-3D printer
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-572842
DO - https://doi.org/10.1016/j.aeaoa.2023.100217
VL - 18
SP - 100217
PB - Elsevier Ltd.
CY - Amsterdam, Niederlande
AN - OPUS4-57284
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bucar, K.
A1 - Malet, J.
A1 - Stabile, L.
A1 - Pražnikar, J.
A1 - Seeger, Stefan
A1 - Žitnik, M.
T1 - Statistics of a Sharp GP2Y Low-Cost Aerosol PM Sensor Output Signals
N2 - In this work, we characterise the performance of a Sharp optical aerosol sensor model GP2Y1010AU0F. The sensor was exposed to different environments: to a clean room, to a controlled atmosphere with known aerosol size distribution and to the ambient atmosphere on a busy city street. During the exposure, the output waveforms of the sensor pulses were digitised, saved and a following offline analysis enabled us to study the behaviour of the sensor pulse-by-pulse. A linear response of the sensor on number concentration of the monosized dispersed PSL particles was shown together with an almost linear dependence on particle diameters in the 0.4 to 4 micrometer range.
The gathered data about the sensor were used to predict its response to an ambient atmosphere, which was observed simultaneously with a calibrated optical particle counter.
KW - Aerosol
KW - Partikel
KW - Aerosolsensor
KW - Luftgüte
KW - Umweltmessung
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517466
DO - https://doi.org/10.3390/s20236707
SN - 1424-8220
VL - 20
IS - 23
SP - 6707
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-51746
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ahlawat, A.
A1 - Seeger, Stefan
A1 - Gottschalk, Martin
A1 - Tuch, T.
A1 - Wiedensohler, A.
T1 - Observation of systematic deviations between Faraday cup aerosol electrometers for varying particle sizes and flow rates - results of the AEROMET FCAE workshop
N2 - Condensation particle counters (CPCs) are widely used for the measurement of aerosol particle number concentrations in the size range from approximately 3 nm to 3 μm. For an SI-traceable calibration of the size-dependent counting efficiency, which is advisable on a regular basis and required in several applications, Faraday cup aerosol electrometers (FCAEs) are considered to be a suitable SI-traceable reference.While the volumetric aerosol inlet flowrate and the electrical current measurement in FCAEs can be related to respective SI references, inter-comparison exercises for FCAEs are still performed on a regular basis to establish reliable uncertainty budgets and to further investigate the influences of designs and operational parameters on comparability. This is strongly demanded in the international community of metrological institutes and aerosol calibration facilities around the world, which provide CPC calibrations. In the present study, the performance of FCAEs was investigated,using Ag test aerosol particles with a 30 nm particle diameter by varying the inlet flowrates from 0.5 l min−1 to 4 l min−1. From our experimental results, significant deviations were observed in FCAE currents at sample flowrates smaller than 1.5 l min−1. It is recommended that these discrepancies should be quantified before an FCAE is used for CPC calibration at low sample flowrates and small particle sizes in the sub-30 nm size range.
KW - Faraday cup aerosol electrometer
KW - CPC calibration
KW - Inter-comparison
KW - Aerosol measurement instruments
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531315
DO - https://doi.org/10.1088/1681-7575/ac0710
SN - 1681-7575
SN - 0026-1394
VL - 58
IS - 5
SP - 1
EP - 8
PB - Institute of Physics (IOP)
CY - Bristol, UK
AN - OPUS4-53131
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Vigna, L.
A1 - Gottschalk, Martin
A1 - Cacocciola, N.
A1 - Verna, A.
A1 - Marasso, S. L.
A1 - Seeger, Stefan
A1 - Pirri, C.F.
A1 - Cocuzza, M.
T1 - Flexible and reusable parylene C mask technology for applications in cascade impactor air quality monitoring systems
N2 - The development of traceable new methodologies to quantify elemental air pollutants in particulate matter (PM) supports modernization of methods used in air quality monitoring networks in Europe. In the framework of the EURAMET EMPIR AEROMET II project, the combination of cascade impactor aerosol sampling and total reflection X-ray fluorescence elemental spectroscopy (TXRF) was investigated. This technique requires a traceable calibration based on reference samples. This paper describes a new, simple and effective method to produce such reference samples using flexible, reusable, and low-cost parylene C shadow masks, fabricated by photolithographic steps. These shadow masks can be used to produce reference samples that mimic the Dekati cascade impactor’s deposition patterns by applying as-prepared micro stencils to 30 mm acrylic substrates and evaporating a reference material (Ti) in arrangements of thin circular dots. The highly flexible direct patterning of acrylic discs with reference material, otherwise impossible with conventional photolithography, allows multiple reusing of the same micro stencils. The aspect ratios of the dots could be repeated with an error less than 4 %. A first set of standard reference samples for the 13 stages of the Dekati cascade impactor was produced and preliminary TXRF measurements of the deposited Ti masses were performed. The centricity of the deposition patterns turned out to be an important parameter for the quality of the TXRF results. The parylene mask technology for the production of reference samples turns out to be a promising new approach for the traceable calibration of TXRF spectrometers for the quantification of element concentrations in environmental aerosol samples but, due to its great versatility, it could be used for several other micropatterning applications on conventional and unconventional substrates.
KW - AEROMET II
KW - Aerosol
KW - Parylene C
KW - Reference samples
KW - Flexible shadow masks
KW - Cascade impactor
KW - Air quality monitoring
KW - Micropatterning
KW - Mask fabrication
KW - Elemental aerosol analysis
KW - TXRF
PY - 2022
DO - https://doi.org/10.1016/j.mne.2022.100108
SN - 2590-0072
VL - 14
SP - 1
EP - 19
PB - Elsevier B.V.
CY - Amsterdam
AN - OPUS4-54252
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Beyer, Sebastian
A1 - Schürmann, Robin
A1 - Feldmann, Ines
A1 - Blocki, A.
A1 - Bald, Ilko
A1 - Schneider, Rudolf
A1 - Emmerling, Franziska
T1 - Maintaining Stable Zeolitic Imidazolate Framework (ZIF) Templates during Polyelectrolyte Multilayer Coating
N2 - Equipping ZIF particles with a polyelectrolyte membrane provides functional groups at their interface, enabling further conjugations necessary for applications such as targeted drug delivery. Previous approaches to coat ZIF particles with polyelectrolytes led to surface corrosion of the template material. This work overcomes previous limitations by performing a Layer-by-Layer (LbL) polyelectrolyte coating onto ZIF-8 and ZIF-67 particles in nonaqueous environment. Using the 2-methylimidazolium salt of polystyrensulfonic acid instead of the acid itself and polyethyleneimine in methanol led to intact ZIF particles after polyelectrolyte coating. This was verified by electron microscopy. Further, zetapotential and atomic force microscopy measurements confirmed a continuous polyelectrolyte multilayer built up. The here reported adaption to the well-studied (LbL) polyelectrolyte selfassembly process provides a facile method to equip ZIF particles with a nanometer thin polyelectrolyte multilayer membrane.
KW - Zeolithe
KW - Molecular Organic Frameworks
KW - MOF
KW - ZIF
KW - Layer-by-Layer
KW - Beschichtung
KW - Polyelektrolyt
PY - 2018
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-447729
DO - https://doi.org/10.1016/j.colcom.2017.11.004
SN - 2215-0382
VL - 22
SP - 14
EP - 17
PB - Elsevier B.V.
CY - Amsterdam, NL
AN - OPUS4-44772
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gerrits, Ruben
A1 - Pokharel, R.
A1 - Breitenbach, Romy
A1 - Radnik, Jörg
A1 - Feldmann, Ines
A1 - Schuessler, J.A.
A1 - von Blanckenburg, F.
A1 - Gorbushina, Anna
A1 - Schott, J.
T1 - How the rock-inhabiting fungus K. petricola A95 enhances olivine dissolution through attachment
N2 - Free-living and mycorrhizal fungi are able to enhance the weathering of rock and other solid substrates. Deciphering the exact mechanisms of these natural processes requires their experimental simulation. Moreover, by performing these simulations with genetically amenable rock-weathering fungi, one can knock-out certain fungal traits and consequently identify their weathering-relevant function. Here, the effect of the rock-inhabiting fungus, Knufia petricola A95, on the dissolution kinetics of an Fe-bearing olivine (Mg1.86Fe0.19SiO4) is investigated at 25 °C and pH 6 using reproducible batch and mixed flow experiments. The availability of a melanin-deficient mutant (ΔKppks) of K. petricola A95, which produces more extracellular polymeric substances (EPS) than the wild type (WT), enables the comparative study of the role of melanin and EPS in olivine dissolution. In abiotic dissolution experiments, the olivine dissolution rate decreased considerably over time at pH 6 but not at pH 3.5. This inhibition of abiotic olivine dissolution at pH 6 was most likely caused by the in-situ oxidation of ferrous Fe and/or the precipitation of ferric hydroxides at the olivine surface. In corresponding biotic experiments at pH 6, both the wild type K. petricola and its melanin-deficient mutant ΔKppks solubilised and bound significant amounts of Fe released by olivine dissolution. Fe oxidation and precipitation were thus prevented and olivine dissolution proceeded faster than in the abiotic experiments. By sequestering Fe directly at the olivine surface, the attached wild type K. petricola cells were particularly efficient at preventing the oxidation of Fe at the mineral surface: the slowdown of olivine dissolution almost completely disappeared. The attachment capacity of these wild type cells is most likely mediated by wild type-specific EPS. Our presented experimental systems allow the oxidation of mineral-released Fe and include a rock-inhabiting fungus, thus simulating chemical, physical and biological conditions that set dissolution rates in a way that is relevant to natural ecosystems.
KW - Black fungi
KW - Bio-weathering
KW - Forsterite
KW - Knock-out mutant
KW - Extracellular polymeric substances
KW - Melanin Adhesion
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509332
DO - https://doi.org/10.1016/j.gca.2020.05.010
VL - 282
SP - 76
EP - 97
PB - Elsevier Ltd.
AN - OPUS4-50933
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nordholt, Niclas
A1 - O'Hara, Kate
A1 - Resch-Genger, Ute
A1 - Blaskovich, M.
A1 - Rühle, Bastian
A1 - Schreiber, Frank
T1 - A fluorescently labelled quaternary ammonium compound (NBD-DDA) to study resistance mechanisms in bacteria
N2 - Quaternary ammonium compounds (QACs) are widely used as active agents in disinfectants, antiseptics, and preservatives. Despite being in use since the 1940s, there remain multiple open questions regarding their detailed mode-of-action and the mechanisms, including phenotypic heterogeneity, that can make bacteria less susceptible to QACs. To facilitate studies on resistance mechanisms towards QACs, we synthesized a fluorescent quaternary ammonium compound, namely N-dodecyl-N,N-dimethyl-[2-[(4-nitro-2,1,3-benzoxadiazol-7-yl)amino]ethyl]azanium-iodide (NBD-DDA). NBD-DDA is readily detected by flow cytometry and fluorescence microscopy with standard GFP/FITC-settings, making it suitable for molecular and single-cell studies. As a proof-of-concept, NBD-DDA was then used to investigate resistance mechanisms which can be heterogeneous among individual bacterial cells. Our results reveal that the antimicrobial activity of NBD-DDA against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa is comparable to that of benzalkonium chloride (BAC), a widely used QAC, and benzyl-dimethyl-dodecylammonium chloride (BAC12), a mono-constituent BAC with alkyl-chain length of 12 and high structural similarity to NBD-DDA. Characteristic time-kill kinetics and increased tolerance of a BAC tolerant E. coli strain against NBD-DDA suggest that the mode of action of NBD-DDA is similar to that of BAC. As revealed by confocal laser scanning microscopy (CLSM), NBD-DDA is preferentially localized to the cell envelope of E. coli, which is a primary target of BAC and other QACs. Leveraging these findings and NBD-DDA‘s fluorescent properties, we show that reduced cellular accumulation is responsible for the evolved BAC tolerance in the BAC tolerant E. coli strain and that NBD-DDA is subject to efflux mediated by TolC. Overall, NBD-DDA’s antimicrobial activity, its fluorescent properties, and its ease of detection render it a powerful tool to study resistance mechanisms of QACs in bacteria and highlight its potential to gain detailed insights into its mode-of-action.
KW - Antimicrobial resistance
KW - Bacteria
KW - Disinfection
KW - Biocides
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-563811
DO - https://doi.org/10.3389/fmicb.2022.1023326
SN - 1664-302X
IS - 13
SP - 1
EP - 13
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-56381
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Li, M.
A1 - Schlaich, C.
A1 - Zhang, J.
A1 - Donskyi, Ievgen
A1 - Schwibbert, Karin
A1 - Schreiber, Frank
A1 - Xia, Y.
A1 - Radnik, Jörg
A1 - Schwerdtle, T.
A1 - Haag, R.
T1 - Mussel-inspired multifunctional coating for bacterial infection prevention and osteogenic induction
N2 - Bacterial infection and osteogenic integration are the two main problems that cause severe complications after surgeries. In this study, the antibacterial and osteogenic properties were simultaneously introduced in biomaterials, where copper nanoparticles (CuNPs) were generated by in situ reductions of Cu ions into a mussel-inspired hyperbranched polyglycerol (MI-hPG) coating via a simple dip-coating method. This hyperbranched polyglycerol with 10 % catechol groups’ modification presents excellent antifouling property, which could effectively reduce bacteria adhesion on the surface. In this work, polycaprolactone (PCL) electrospun fiber membrane was selected as the substrate, which is commonly used in biomedical implants in bone regeneration and cardiovascular stents because of its good biocompatibility and easy post-modification. The as-fabricated CuNPs-incorporated PCL membrane [PCL-(MI-hPG)-CuNPs] was confirmed with effective antibacterial performance via in vitro antibacterial tests against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and multi-resistant E. coli. In addition, the in vitro results demonstrated that osteogenic property of PCL-(MI-hPG)-CuNPs was realized by upregulating the osteoblast-related gene expressions and protein activity. This study shows that antibacterial and osteogenic properties can be balanced in a surface coating by introducing CuNPs.
KW - Mussel-inspired coating
KW - CuNPs
KW - Multi-resistant bacteria
KW - Antibacterial
KW - Antifouling
KW - Osteogenesis
PY - 2021
DO - https://doi.org/10.1016/j.jmst.2020.08.011
SN - 1005-0302
VL - 68
SP - 160
EP - 171
PB - Elsevier Ltd.
AN - OPUS4-51519
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kayser, Y.
A1 - Gross, A.
A1 - Hönicke, P.
A1 - Osan, J.
A1 - Pollakowski-Herrmann, B.
A1 - Seeger, Stefan
A1 - Beckhoff, B.
T1 - Reliable chemical analysis of aerosols by reference-free X-ray spectrometry for monitoring airborne particulate matter
N2 - The physical and chemical analysis of aerosols using reliable and physically traceable methods is important for the thorough investigation of airborne particles to support a better understanding of their origin as well as their health and climate impacts. Within the European Metrology Research AeroMet project,the aim of hysikalisch–Technische Bundesanstalt’s (PTB) X-ray spectrometry group is to develop and establish traceable and reliable X-ray methods to measure the elemental mass deposition per unit area, the elemental composition,and the chemical binding state of particulate matter supported by a flat substrate. This approach can substantially contribute to support quantitative analytical methods during on-site measurement campaigns where portable Instrumentation is employed by qualifying suitable calibration samples for commercial analytical X-ray instruments and by investigating samples collected during the field campaign.
KW - AEROMET project
KW - X-Ray analysis
KW - TXRF
KW - Aerosols
KW - Particles
KW - Air pollution
KW - Elemental composition
PY - 2020
UR - https://www.spectroscopyonline.com/view/reliable-chemical-analysis-of-aerosols-by-reference-free-x-ray-spectrometry-for-monitoring-airborne-particulate-matter
SN - 0887-6703
VL - 35
IS - 10
SP - 42
EP - 46
PB - MJH Life Sciences
CY - Cranbury, NJ
AN - OPUS4-53357
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Völzke, Jule L.
A1 - Hodjat Shamami, Parya
A1 - Gawlitza, Kornelia
A1 - Feldmann, Ines
A1 - Zimathies, Annett
A1 - Meyer, Klas
A1 - Weller, Michael G.
T1 - High-Purity Corundum as Support for Affinity Extractions from Complex Samples
N2 - Nonporous corundum powder, known as an abrasive material in the industry, was functionalized covalently with protein binders to isolate and enrich specific proteins from complex matrices. The materials based on corundum were characterized by TEM, ESEM, BET, DLS, EDS, and zeta potential measurements. The strong Al-O-P bonds between the corundum surface and amino phosphonic acids were used to introduce functional groups for further conjugations. The common crosslinker glutaraldehyde was compared with a hyperbranched polyglycerol (PG) of around 10 kDa. The latter was oxidized with periodate to generate aldehyde groups that can covalently react with the amines of the surface and the amino groups from the protein via a reductive amination process. The amount of bound protein was quantified via aromatic amino acid analysis (AAAA). This work shows that oxidized polyglycerol can be used as an alternative to glutaraldehyde. With polyglycerol, more of the model protein bovine serum albumin (BSA) could be attached to the surface under the same conditions, and lower non-specific binding (NSB) was observed. As a proof of concept, IgG was extracted with protein A from crude human plasma. The purity of the product was examined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). A binding capacity of 1.8 mg IgG per gram of corundum powder was achieved. The advantages of corundum include the very low price, extremely high physical and chemical stability, pressure resistance, favorable binding kinetics, convenient handling, and flexible application.
KW - Corundum
KW - Sapphire
KW - Affinity chromatography
KW - Antibodies
KW - Self-assembled monolayers (SAM)
KW - Polyglycerol
KW - Dendrimer
KW - Nonspecific binding (NSB)
KW - Purification
KW - Solid-phase extraction (SPE)
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-559342
DO - https://doi.org/10.3390/separations9090252
VL - 9
IS - 9
SP - 1
EP - 13
PB - MDPI
CY - Basel
AN - OPUS4-55934
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Seeger, Stefan
A1 - Brödner, Doris
A1 - Jacobi, T.
A1 - Rasch, Fabian
A1 - Rothhardt, Monika
A1 - Wilke, Olaf
T1 - Emissions of fine and ultrafine particles and volatile organic compounds from different filament materials operated on a low-cost 3D printer
T1 - Emissionen feiner und ultrafeiner Partikel sowie flüchtiger organischer Verbindungen beim Einsatz verschiedener Filamentmaterialien in einem „low-cost“-3D-Drucker
N2 - 3D-printing or additive manufacturing has many promising and unique advantages. Especially low cost molten polymer Deposition Printers are increasingly populär in the private and educational sector.
Their environmental friendliness can be questioned due to recently reported ultrafine particle and suspected VOC emissions, To further investigate 3D-printing as a potential indoor air pollution source we characterized fine and ultrafine particle emissions from a molten polymer deposition printer producing a 3D object with ten marketable polymer filament materials under controlled conditions in a test chamber. VOC emissions from the filaments have also been compared. Using a straightforward emission model time dependent and averaged particle emission rates were determined. The results indicate that under comparable conditions some filament materials produce mainly ultrafine particles up to an average rate of 1013 per minute. This value is in the upper ränge of typical indoor ultrafine particle sources (e.g. Smoking, frying, candle light, laser printer). The observed material-specific rates differ by five Orders of magnitude. Filament-specific gaseous emissions of organic compounds such as bisphenol A, styrene and others were also detected.
Our results suggest a detailed evaluation of related risks and considering protective measures such as housing and filtering.
N2 - 3D-Druck oder additive Herstellungsverfahren haben eine Menge vielversprechender und einzigartiger Vorteile. Insbesondere günstige 3D-Drucker für Polymere werden im privaten und ausbildenden Bereich zunehmend beliebter. Ihre Umweltfreundlichkeit kann aufgrund jüngst berichteter Emissionen ultrafeiner Partikel und vermuteter VOC-Emissionen infrage gestellt werden. Um 3D-Drucker für Polymere als mögliche Quelle von Innenraumluftverunreinigungen weiter zu untersuchen, charakterisierten wir die Emissionen feiner und ultrafeiner Partikel bei der Herstellung eines 3D-Objekts unter Verwendung zehn marktgängiger Polymerfilamente unter kontrollierten Bedingungen in einer Emissionsprüfkammer. Die VOC-Emissionen der verschiedenen Filamente wurden ebenfalls verglichen. Die zeitabhängigen und gemittelten Partikelemissionsraten wurden durch Anwendung eines einfachen Emissionsmodells bestimmt. Die Ergebnisse zeigen, dass unter vergleichbaren Bedingungen einige Filamente mit einer mittleren Rate von 10
KW - Emission
KW - Ultrafine particles
KW - VOC
KW - 3D printer
PY - 2018
SN - 0949-8036
SN - 0039-0771
VL - 78
IS - 3
SP - 79
EP - 87
PB - Springer-VDI-Verl.
CY - Düsseldorf
AN - OPUS4-44954
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Breitenbach, Romy
A1 - Gerrits, Ruben
A1 - Dementyeva, Polina
A1 - Knabe, Nicole
A1 - Schumacher, Julia
A1 - Feldmann, Ines
A1 - Radnik, Jörg
A1 - Ryo, M.
A1 - Gorbushina, Anna
T1 - The role of extracellular polymeric substances of fungal biofilms in mineral attachment and weathering
N2 - The roles extracellular polymeric substances (EPS) play in mineral attachment and weathering were studied using genetically modified biofilms of the rock-inhabiting fungus Knufia petricola strain A95. Mutants deficient in melanin and/or carotenoid synthesis were grown as air-exposed biofilms. Extracted EPS were quantified and characterised using a combination of analytical techniques. The absence of melanin affected the quantity and composition of the produced EPS: mutants no longer able to form melanin synthesised more EPS containing fewer pullulan-related glycosidic linkages. Moreover, the melanin-producing strains attached more strongly to the mineral olivine and dissolved it at a higher rate. We hypothesise that the pullulan-related linkages, with their known adhesion functionality, enable fungal attachment and weathering. The released phenolic intermediates of melanin synthesis in the Δsdh1 mutant might play a role similar to Fe-chelating siderophores, driving olivine dissolution even further. These data demonstrate the need for careful compositional and quantitative analyses of biofilm-created microenvironments.
KW - Biofilms
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-549025
DO - https://doi.org/10.1038/s41529-022-00253-1
SN - 2397-2106
VL - 6
SP - 1
EP - 11
PB - Springer Nature
CY - London
AN - OPUS4-54902
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nordholt, Niclas
A1 - Kanaris, Orestis
A1 - Schmidt, Selina
A1 - Schreiber, Frank
T1 - Persistence against benzalkonium chloride promotes rapid evolution of tolerance during periodic disinfection
N2 - Biocides used as disinfectants are important to prevent the transmission of pathogens, especially during the current antibiotic resistance crisis. This crisis is exacerbated by phenotypically tolerant persister subpopulations that can survive transient antibiotic Treatment and facilitate resistance evolution. Here, we show that E. coli displays persistence against a widely used disinfectant, benzalkonium chloride (BAC). Periodic, persister-mediated failure of disinfection rapidly selects for BAC tolerance, which is associated with reduced cell Surface charge and mutations in the lpxM locus, encoding an enzyme for lipid A biosynthesis.
Moreover, the fitness cost incurred by BAC tolerance turns into a fitness benefit in the presence of antibiotics, suggesting a selective advantage of BAC-tolerant mutants in antibiotic environments. Our findings highlight the links between persistence to disinfectants and resistance evolution to antimicrobials.
KW - Persistence
KW - Biocides
KW - Evolution
KW - Cross-resistance
KW - Biocide tolerance
KW - Disinfection
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-538532
DO - https://doi.org/10.1038/s41467-021-27019-8
SN - 2041-1723
VL - 12
IS - 1
SP - 6792
PB - Springer
AN - OPUS4-53853
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dittrich, Maria
A1 - Paulo, Carlos
A1 - Knabe, Nicole
A1 - Sturm, Heinz
A1 - Zaitsev, Vladimir
A1 - Gorbushina, Anna
T1 - Microscopic Raman study of fungal pigment using the genetically amenable rock inhabitant Knufia petricola as a model organism
N2 - Fungal pigments such as melanin and carotenoids are distinctive markers of animal and plant pathogenic fungi as well as their environmental relatives. These complex pigments play important roles in pathogenicity and stress tolerance while also being useful as biomarkers. Accordingly, it is important to be able to identify in situ the pigments in black fungi, a group of clinical and environmental importance. In this study, wild-type and genetically modified strains of Knufia petricola A95 and wild fungal cells attached to ancient rock were investigated for their spectroscopic and microscopic Raman features and morphological appearance. Knockout mutants of melanin synthesis genes pks1 (polyketide synthase), sdh1 (scytalone dehydratase), and both pks1 and the carotenoid synthesis gene phd1 (phytoene desaturase) were studied We applied two different Raman microscopes using two lasers, with 633 nm and 488 nm wavelengths. We analyzed and compared Raman spectra between the measured reference substances and the mutant and wild-type strains. In the wild strain WT:A95, the peaks close to melanin peals were found at 1353 cm−1 and 1611 cm−1. There are no characteristic melanin peaks at 1580–1600 cm−1 and around 1350 cm−1 at the spectrum of the Δpks1/Δphd1 mutant and the Δsdh1 mutant. The Δpks1 mutant spectrum has the peaks at the beta-carotene v2 C-C in-plane stretch at 1155 cm−1 and v3 C-CH3 deformation at 1005 cm−1. The peaks of carotenoids and melanin were found in all mutants and the wild strain, except the Δpks1/Δphd1 mutant. Raman spectra allow for discrimination between the various pigments. Hence, interactions between natural fungal melanin, as well as other protective pigments, and complex environmental matrices can be characterized on a range of spatial and temporal scales.
KW - Raman Spectroscopy
KW - Instrumentation
KW - Analytical Chemistry
KW - Knufia petricola
KW - Confocal microscopy
KW - Atomic and Molecular Physics and Optics
PY - 2023
DO - https://doi.org/10.1016/j.saa.2023.123250
SN - 1386-1425
VL - 303
SP - 1
EP - 11
PB - Elsevier BV
AN - OPUS4-58792
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tavasolyzadeh, Zeynab
A1 - Tang, Peng
A1 - Hahn, Marc Benjamin
A1 - Hweidi, Gada
A1 - Nordholt, Niclas
A1 - Haag, Rainer
A1 - Sturm, Heinz
A1 - Topolniak, Ievgeniia
T1 - 2D and 3D Micropatterning of Mussel‐Inspired Functional Materials by Direct Laser Writing
N2 - AbstractThis work addresses the critical need for multifunctional materials and substrate‐independent high‐precision surface modification techniques that are essential for advancing microdevices and sensing elements. To overcome existing limitations, the versatility of mussel‐inspired materials (MIMs) is combined with state‐of‐the‐art multiphoton direct laser writing (DLW) microfabrication. In this way, 2D and 3D MIM microstructures of complex designs are demonstrated with sub‐micron to micron resolution and extensive post‐functionalization capabilities. This study includes polydopamine (PDA), mussel‐inspired linear, and dendritic polyglycerols (MI‐lPG and MI‐dPG), allowing their direct microstructure on the substrate of choice with the option to tailor the patterned topography and morphology in a controllable manner. The functionality potential of MIMs is demonstrated by successfully immobilizing and detecting single‐stranded DNA on MIM micropattern and nanoarray surfaces. In addition, easy modification of MIM microstructure with silver nanoparticles without the need of any reducing agent is shown. The methodology developed here enables the integration of MIMs in advanced applications where precise surface functionalization is essential.
KW - Direct laser writing
KW - Mussel-inspired materials
KW - Polyglycerol
KW - Polydopamine
KW - Micropatterning
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-588778
DO - https://doi.org/10.1002/smll.202309394
SN - 1613-6829
SP - 1
EP - 12
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-58877
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nordholt, Niclas
A1 - van Heerden, J. H.
A1 - Bruggeman, F. J.
T1 - Biphasic Cell-Size and Growth-Rate Homeostasis by Single Bacillus subtilis Cells
N2 - The growth rate of single bacterial cells is continuously disturbed by random fluctuations in biosynthesis rates and by deterministic cell-cycle events, such as division, genome duplication, and septum formation.
It is not understood whether, and how, bacteria reject these growth-rate disturbances. Here, we quantified growth and constitutive protein expression dynamics of single Bacillus subtilis cells as a function of cell-cycle progression. We found that, even though growth at the population level is exponential, close inspection of the cell cycle of thousands of single Bacillus subtilis cells reveals systematic deviations from exponential growth.
Newborn cells display varying growth rates that depend on their size. When they divide, growth-rate Variation has decreased, and growth rates have become birth size independent. Thus, cells indeed compensate for growth-rate disturbances and achieve growth-rate homeostasis. Protein synthesis and growth of single cells displayed correlated, biphasic dynamics from cell birth to division. During a first phase of variable duration, the absolute rates were approximately constant and cells behaved as sizers. In the second phase, rates increased, and growth behavior exhibited characteristics of a timer strategy. These findings demonstrate that, just like size homeostasis, growth-rate homeostasis is an inherent property of single cells that is achieved by cell-cycle-dependent rate adjustments of biosynthesis and growth.
KW - Bacterial cell cycle
KW - Single cell microbiology
KW - Bacillus subtilis
KW - Growth-rate homeostasis
KW - Biphasic growth
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-510689
DO - https://doi.org/10.1016/j.cub.2020.04.030
VL - 30
IS - 12
SP - 2238
EP - 2247
PB - Cell Press
AN - OPUS4-51068
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Blasenbauer, D.
A1 - Huber, F.
A1 - Lederer, J.
A1 - Quina, M.
A1 - Blanc-Biscarat, D.
A1 - Bogush, A.
A1 - Bontempi, E.
A1 - Blondeau, J.
A1 - Chimenos, J.
A1 - Dahlbo, H.
A1 - Fagerqvist, J.
A1 - Giro-Paloma, J.
A1 - Hjelmar, O.
A1 - Hyks, J.
A1 - Keaney, J.
A1 - Lupsea-Toader, M.
A1 - O’Caollai, C.
A1 - Orupõld, K.
A1 - Pajak, T.
A1 - Simon, Franz-Georg
A1 - Svecova, L.
A1 - Syc, M.
A1 - Uvang, R.
A1 - Vaajasaari, K.
A1 - van Caneghem, J.
A1 - van Zomeren, A.
A1 - Vasarevičius, S.
A1 - Wégner, K.
A1 - Fellner, J.
T1 - Legal situation and current practice of waste incineration bottom ash utilisation in Europe
N2 - Almost 500 municipal solid waste incineration plants in the EU, Norway and Switzerland generate about 17.6 Mt/a of incinerator bottom ash (IBA). IBA contains minerals and metals. Metals are mostly separated and sold to the scrap market and minerals are either disposed of in landfills or utilised in the construction sector. Since there is no uniform regulation for IBA utilisation at EU level, countries developed own rules with varying requirements for utilisation. As a result from a cooperation network between European experts an up-to-date overview of documents regulating IBA utilisation is presented. Furthermore, this work highlights the different requirements that have to be considered. Overall, 51 different parameters for the total content and 36 different parameters for the emission by leaching are defined. An analysis of the defined parameter reveals that leaching parameters are significantly more to be considered compared to total content parameters. In order to assess the leaching behaviour nine different leaching tests, including batch tests, up-flow percolation tests and one diffusion test (monolithic materials) are in place.
A further discussion of leaching parameters showed that certain countries took over limit values initially defined for landfills for inert waste and adopted them for IBA utilisation. The overall utilisation rate of IBA in construction works is approximately 54 wt%. It is revealed that the rate of utilisation does not necessarily depend on how well regulated IBA utilisation is, but rather seems to be a result of political commitment for IBA recycling and economically interesting circumstances.
KW - Bottom ash
KW - Leaching tests
KW - Utilisation
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-500161
DO - https://doi.org/10.1016/j.wasman.2019.11.031
SN - 0956-053X
VL - 102
SP - 868
EP - 883
PB - Elsevier Ltd.
CY - Amsterdam
AN - OPUS4-50016
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Simon, Franz-Georg
A1 - Kalbe, Ute
T1 - Measurement of the Environmental Impact of Materials
N2 - This Special Issue, ‘Measurement of the Environmental Impact of Materials’, is focused on the impact that materials have on the environmental compartments of soil, water and air. Leaching and emission processes, including underlying mechanisms, are a recurring topic in most published articles in the present Special Issue. Contributions have come from three continents and numerous countries (USA, Germany, France, Latvia, Poland, Russia, Japan, Korea and Thailand) indicating the global dimension of the subject.
KW - Leaching
KW - Recycling
KW - Nano-materials
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545099
DO - https://doi.org/10.3390/ma15062208
SN - 1996-1944
VL - 15
IS - 6
SP - 1
EP - 3
PB - MDPI
CY - Basel
AN - OPUS4-54509
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chubarenko, B.
A1 - Domnin, D.
A1 - Simon, Franz-Georg
A1 - Scholz, Philipp
A1 - Leitsin, V.
A1 - Tovpinets, A.
A1 - Karmanov, K.
A1 - Esiukova, E.
T1 - Change over Time in theMechanical Properties of Geosynthetics Used in Coastal Protection in the South-Eastern Baltic
N2 - The most massive design on the Baltic shore used geosynthetic materials, the landslide protection construction in Svetlogorsk (1300 m long, 90,000 m2 area, South-Eastern Baltic, Kaliningrad Oblast, Russian Federation) comprises the geotextile and the erosion control geomat coating the open-air cliff slopes. Due to changes in elastic properties during long-term use in the open air, as well as due to its huge size, this structure can become a non-negligible source of microplastic pollution in the Baltic Sea. Weather conditions affected the functioning of the structure, so it was assessed that geosynthetic materials used in this outdoor (open-air) operation in coastal protection structures degraded over time. Samples taken at points with different ambient conditions (groundwater outlet; arid places; exposure to the direct sun; grass cover; under landslide) were tested on crystallinity and strain at break. Tests showed a 39–85% loss of elasticity of the polymer filaments after 3 years of use under natural conditions. Specimens exposed to sunlight are less elastic and more prone to fail, but not as much as samples taken from shaded areas in the grass and under the landslide, which were the most brittle.
KW - Geosynthetics
KW - Microplastic
KW - Degradation
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567978
UR - https://www.mdpi.com/2077-1312/11/1/113
DO - https://doi.org/10.3390/jmse11010113
SN - 2077-1312
VL - 11
IS - 1
SP - 1
EP - 14
PB - MDPI
CY - Basel
AN - OPUS4-56797
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Abis, M.
A1 - Bruno, M.
A1 - Simon, Franz-Georg
A1 - Grönholm, R.
A1 - Hoppe, M.
A1 - Kuchta, K.
A1 - Fiore, S.
T1 - A Novel Dry Treatment for Municipal Solid Waste Incineration Bottom Ash for the Reduction of Salts and Potential Toxic Elements
N2 - The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4.
The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%), chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
KW - Bottom ash
KW - Dry treatment
KW - Potential toxic elements
KW - Salts
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527963
DO - https://doi.org/10.3390/ma14113133
SN - 1996-1944
VL - 14
IS - 11
SP - 3133
PB - MDPI
CY - Basel
AN - OPUS4-52796
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Simon, Franz-Georg
A1 - Scholz, Philipp
T1 - Assessment of the Long-Term Leaching Behavior of Incineration Bottom Ash: A Study of Two Waste Incinerators in Germany
N2 - The long-term leaching behavior of incineration bottom ash (IBA) was studied with large-scale samples from two German waste incinerators with grate technology. The observation period was up to 281 days. The aging processes proceeded faster in the outdoor storage of the samples. The dominant factor in the leaching behavior is the pH, which starts at values above 12 and decreases to values below 10 (outdoors, <11 indoors). Most heavy metals exhibit minimum solubility in this pH range. The solubility of Sb depends on the prevailing Ca concentration, due to the formation of low-soluble Ca antimonate. The very low sulfate concentrations observed in the leaching tests with fresh IBA could be explained by the presence of ettringite. In the course of the aging reaction, ettringite is transformed into gypsum. The results from batch tests were compared with those from column tests, showing reasonable agreement. Leaching dynamics can be better followed with column tests. All results confirm that the use of IBA is possible under German law.
KW - Aging
KW - Incineration bottom ash
KW - Leaching
KW - Secondary building materials
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591599
DO - https://doi.org/10.3390/app132413228
SN - 2076-3417
VL - 13
IS - 24
SP - 1
EP - 15
PB - MDPI AG
CY - Basel
AN - OPUS4-59159
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bandow, N.
A1 - Aitken, M. D.
A1 - Geburtig, Anja
A1 - Kalbe, Ute
A1 - Piechotta, Christian
A1 - Schoknecht, Ute
A1 - Simon, Franz-Georg
A1 - Stephan, Ina
T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives?
N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented.
KW - Environmental simulations
KW - Polymer-based products
KW - Artificial weathering
KW - Degradation
KW - Leaching
KW - Soil contact
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310
DO - https://doi.org/10.3390/ma13122709
SN - 1996-1944
VL - 13
IS - 12
SP - Paper 2709, 22
PB - MDPI
CY - Basel, Switzerland
AN - OPUS4-50931
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pienkoß, Fabian
A1 - Abis, M.
A1 - Bruno, M.
A1 - Grönholm, R.
A1 - Hoppe, M.
A1 - Kuchta, K.
A1 - Fiore, S.
A1 - Simon, Franz-Georg
T1 - Heavy metal recovery from the fine fraction of solid waste incineration bottom ash by wet density separation
N2 - This work is aimed at exploring the recovery of heavy metals from the fine fraction of solid waste incineration bottom ash.
For this study, wet-discharged bottom ash fine-fraction samples from full-scale treatment plants in Germany and Sweden were analyzed. The potential for the recovery of heavy metal compounds was investigated through wet density-separation with a shaking table. The feed materials were processed without any pre-treatment and the optimum processing conditions were determined by means of design of experiments. Tilt angle and stroke frequency were identified as the most relevant parameters, and the optimum settings were − 7.5° and 266 rpm, respectively. The obtained balanced copper enrichments (and yields) were 4.4 (41%), 6.2 (28%) and 2.4 (23%). A maximum copper enrichment of 14.5 with 2% yield was achieved, providing a concentrate containing 35.9 wt.% relevant heavy metal elements. This included 26.3 wt.% iron, 4.3 wt.% zinc and 3.8 wt.% copper. In conclusion, density separation with shaking tables can recover heavy metals from bottom ash fine fractions. Medium levels of heavy metal enrichment (e.g., for Cu 2.7–4.4) and yield (Cu: 26–41%) can be reached simultaneously.
However, the separation performance also depends on the individual bottom ash sample.
KW - Bottom ash
KW - Density separation
KW - Circular economy
KW - Design of experiments
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-538569
DO - https://doi.org/10.1007/s10163-021-01325-1
SN - 1438-4957
SN - 1611-8227
VL - 24
SP - 364
EP - 377
PB - Springer Nature
CY - Heidelberg
AN - OPUS4-53856
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hodgkinson, I.
A1 - Maletz, R.
A1 - Simon, Franz-Georg
A1 - Dornack, C.
T1 - Mini-review of waste-to-energy related air pollution and their limit value regulations in an international comparison
N2 - The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europe suggest being possible. Emerging economies, such as India and China, have shown efforts to improve their environmental protection standards but still have room to improve. This could be set in relation to other industrial emitting processes and therefore could be used to assess the relevance of this industry sector to the national emission inventories.
KW - Waste incineration
KW - Waste-to-energy
KW - Limit values
KW - Regulation
KW - Emission
KW - Air pollution control
PY - 2021
DO - https://doi.org/10.1177/0734242X211060607
SN - 0734-242X
SN - 1096-3669
VL - 40
IS - 7
SP - 849
EP - 858
PB - Sage Publishing
CY - London
AN - OPUS4-53858
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholz, Philipp
A1 - Putna-Nimane, I.
A1 - Barda, I.
A1 - Liepina-Leimane, I.
A1 - Strode, E.
A1 - Kileso, A.
A1 - Esiukova, E.
A1 - Chubarenko, B.
A1 - Purina, I.
A1 - Simon, Franz-Georg
T1 - Environmental impact of geosynthetics in coastal protection
N2 - Geosynthetic materials are applied in measures for coastal protection. Weathering or any damage of constructions, as shown by a field study in Kaliningrad Oblast (Russia), could lead to the littering of the beach or the sea (marine littering) and the discharge of possibly harmful additives into the marine environment. The ageing behavior of a widely used geotextile made of polypropylene was studied by artificial accelerated ageing in water-filled autoclaves at temperatures of 30 to 80 °C and pressures of 10 to 50 bar. Tensile strength tests were used to evaluate the progress of ageing, concluding that temperature rather than pressure was the main factor influencing the ageing of geotextiles. Using a modified Arrhenius equation, it was possible to calculate the half-life for the loss of 50% of the strain, which corresponds to approximately 330 years. Dynamic surface leaching and ecotoxicological tests were performed to determine the possible release of contaminants. No harmful effects on the test organisms were observed.
KW - Geosynthetics
KW - Geotextiles
KW - Dynamic surface leaching test
KW - Artificial ageing
KW - Marine littering
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520576
DO - https://doi.org/10.3390/ma14030634
SN - 1996-1944
VL - 14
IS - 3 (Special issue: Measurement of the environmental impact of materials)
SP - 634-1
EP - 634-13
PB - MDPI
CY - Basel
AN - OPUS4-52057
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Roesch, Philipp
A1 - Schinnen, Andrea
A1 - Riedel, Maren
A1 - Sommerfeld, Thomas
A1 - Sawal, G.
A1 - Bandow, N.
A1 - Vogel, Christian
A1 - Kalbe, Ute
A1 - Simon, Franz-Georg
T1 - Investigation of pH-dependent extraction methods for PFAS in (fluoropolymer-based) consumer products: A comparative study between targeted and sum parameter analysis
N2 - Here, we report a comparative study of different sum parameter analysis methods for the extraction of per- and polyfluoroalkyl substances (PFAS) from manufactured consumer products, which can be measured by combustion ion chromatography (CIC). Therefore, a hydrolysis-based extraction method was further developed, which accounts for the addition of hydrolyzable covalently bound polyfluoroalkylated side-chain polymers (SFPs) to the extractable organic fluorine portion of the mass balance proposed as "hydrolyzable organically bound fluorine" (HOF). To test this hypothesis, the method was applied to 39 different consumer products containing fluoropolymers or monomeric PFAS taken from four different categories: outdoor textiles, paper packaging, carpeting, and permanent baking sheets. We also evaluated the method's efficiency by extracting four synthesized fluorotelomer polyacrylate reference compounds. The total fluorine (TF) and extractable organically bound fluorine (EOF) values were measured through CIC using established protocols. The TF values ranged from sub-ppb to %-levels, depending on the compound class. All samples showed results for hydrolyzed organofluorine (HOF) between 0.03 and 76.3 μg/g, while most EOF values were lower (C8 (e.g. 580 µg/kg dw PFOS for Soil1), whereas the consumer product samples showed a more uniform distribution with regard to chain lengths from C4 to C8. Independent from quantified PFAS amounts via target analysis, µ-XRF mapping combined with µ-XANES spectroscopy was successfully applied to detect both point-specific concentration maxima and evenly distributed surface coatings of fluorinated organic contaminants in the corresponding samples.
KW - PFAS
KW - XRF
KW - LC-MS/MS
KW - XANES
KW - Fluoride
KW - Soil
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576109
DO - https://doi.org/10.1039/D3EM00107E
SN - 2050-7887
SP - 1
EP - 12
PB - Royal Society of Chemistry
AN - OPUS4-57610
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -