TY - CONF A1 - Fuentes, Elsa A1 - Prieto, Beatriz A1 - Gorbushina, Anna T1 - Mixed model biofilm: interactions between algae, fungi and cyanobacteria and their effects on granite biodeterioration N2 - Granite, despite being one of the most widely used rocks for building material cultural heritage, is also one of the least studied. Previous works have shown that environmental parameters modulated by climate change will lead to changes in the microbial composition of biofilms grown on stone, but also to changes in the production of EPS, in the composition of pigments and, as a consequence, in the biodeterioration processes that this rock undergoes (Fuentes, 2023). Considering that the colonisation process is highly dynamic, small changes in climatic conditions can lead to the formation of different types of biofilms and diverse interactions between species. Knowing the contribution of the different organisms to the deterioration process is important both to anticipate the consequences that climate change will have on the deterioration of the granite, but also when addressing the processes of recolonization after cleaning, to ensure an improvement of the present situation. So, in order to continue my line of research on granite biodeterioration, the aim of this new project is to study the contribution of each type of organism (green algae, cyanobacteria and fungi) to the process of granite deterioration as well as the specific effect on each mineral, in addition to its role in the resilience and response of biofilms to environmental changes. With this main objective, the effect of the type of substrate on the composition of a model mixed biofilm formed by the fungus Knufia petricola, the algae Jaagichlorella sp. and the cyanobacterium Synechocystis sp. will be studied. The results obtained on granite will be compared with those obtained with other lithic types such as marble or limestone. Furthermore, it will be observed if the different ratios between organisms lead to changes in the capacity of these organisms to generate biodeterioration and to buffer climatic changes. Finally, the susceptibility of each mineral that makes up the granite - quartz, feldspars, micas - to biodeterioration mediated by each type of organism will be analysed. To address these questions, on the one hand, the response of the mixed biofilms as a whole will be evaluated by means of confocal microscopy, PAM, as well as the quantification of pigments and EPS, and on the other hand, the effect of these organisms on the deterioration of the substrates, through the use of SEM and TEM, which will allow the assessment of both the changes in porosity and the appearance of deterioration in the surface layers of the rock. This research will deepen the knowledge of the processes of granite deterioration, which have been limitedly studied in relation to microorganisms; but also aims to provide the scientific community with a model mixed biofilm to increase the reproducibility between experiments, one of the main limitations of this field of study. T2 - 19th International Biodeterioration and Biodegradation Symposium CY - Berlin, Germany DA - 09.09.2024 KW - Biofilm KW - Stone KW - Algae KW - Fungi KW - Cyanobacteria KW - Cultural heritage PY - 2024 AN - OPUS4-62272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerrits, Ruben T1 - Genetic engineering of a black rock-inhabiting fungus shows its strengths and weaknesses  N2 - Environmental black fungi are known to inhabit anthropogenic habitats like marble monuments, solar panels, indoor walls and even washing machines. These pests are generally assumed to persist and grow in these environments due to their melanin production and oligotrophic lifestyle, respectively. We aimed to confirm these assumptions and to find methods to mitigate their substrate colonisation and deterioration by looking at their ability to produce melanin and take up iron, the latter being a general weakness of aerobes. This was done by means of selecting one species, Knufia petricola, and applying CRISPR/Cas9-mediated genome editing techniques. This showed that K. petricola produces one siderophore; deletion of its encoding gene showing no strong phenotypic effects. Deletion of the other iron uptake mechanism – reductive iron assimilation (RIA) – did however cause a strong growth deficiency at iron depleted conditions. Both together reveal that K. petricola has a weak siderophore and relies on RIA to acquire iron, reflecting a natural habitat free of competition for iron. This comes at a price: K. petricola but also other black fungi isolated from solar panels are extremely sensitive to mediocre iron chelators, offering us a mitigation strategy. Melanin, although adsorbing and reducing iron, did not have an observable effect on iron uptake. The pigment did however affect the fungal ability to withstand desiccation: pigment-deficient mutants were not able to withstand a prolonged incubation in a desiccator. This is a clear advantage in the colonisation of dry subaerial surfaces. T2 - 12th International Mycological Congress (IMC12) CY - Maastricht, Netherlands DA - 12.08.2024 KW - Iron uptake KW - Black fungi KW - Melanin PY - 2024 AN - OPUS4-62269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerrits, Ruben T1 - Genetic engineering of melanised fungi to study the role of melanin in mineral weathering and metal corrosion N2 - Melanins are organic, dark pigments produced by many organisms. Fungi either fix these pigments in their cell wall or secrete them into their environment to protect themselves against an array of physicochemical stresses (e.g., UV irradiation, desiccation, ...). However, melanins can also adsorb metals like iron and therefore might have a role in the fungal capacity to deteriorate iron-containing minerals and metals. To study this, we focus on the fungi Knufia petricola, a rock-inhabiting fungus with melanised cell walls which deteriorates minerals, and Amorphotheca resinae, a soil-borne fungus able to secrete melanin, degrade alkane-containing fuels, and corrode metals. The broader significance of this work lies in the mitigation of climate change via the negative emission technology enhanced rock weathering for the former to the mitigation of corrosion of biofuel infrastructure for the latter. Genes of K. petricola involved in melanin synthesis and iron uptake were deleted and down- and up- regulated to generate strains with a different melanin content and ability to take up iron. These strains and the wild type (WT) were exposed to a growth solution containing the iron-magnesium silicate olivine of which dissolution rates were obtained by measuring aqueous Mg concentrations using ICP-OES. Thus, the specific mineral deterioration mechanisms of melanised fungi were identified. Abiotically, these experiments showed that iron oxidation at the surface inhibits olivine dissolution. K. petricola was able to enhance dissolution when this abiotic inhibition is strongest (at pH 6) but prevented dissolution when this inhibition is weakest (at pH 4). The fungus therefore dissolves olivine by interacting with the oxidised iron at the olivine surface. Its iron uptake pathways do not seem to be involved as mutants deficient in iron uptake dissolved olivine at the same rate as the WT. The higher dissolution rates of a mutant which secretes a melanin precursor and the lower rates of a melanin-deficient mutant, however, indicate that the iron-adsorbing and -reducing capacities of melanin play a key role. This hypothesis is further supported by carbon steel corrosion experiments with six strains of A. resinae isolated from anthropogenic and natural environments. Their varying ability to secrete melanin correlated with their corrosion rates. We now plan to develop CRISPR/Cas9-mediated genome editing techniques for A. resinae to figure out whether this correlation is also a causation. In summary, our data show that the iron-binding capacity of melanins enables fungi to deteriorate iron-containing substrates at a higher rate. T2 - IBBS19 CY - Berlin, Germany DA - 09.09.2024 KW - Black fungi KW - Weathering KW - Corrosion PY - 2024 AN - OPUS4-61171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gerrits, Ruben T1 - Quantifying and modelling growth of a subaerial black fungus N2 - Environmental, black fungi are known for their oligotrophic lifestyle and melanin production and are ubiquitous colonisers of natural and anthropogenic subaerial surfaces like marble monuments, washing machine soap dispensers and solar panels. Even though their growth is generally unappreciated, prevention or inhibition thereof is still to be accomplished. We have chosen the genetically amenable, black fungus Knufia petricola as a model species to study these organisms. Our goal is simple: the quantitative description of its growth on various environmental conditions to create a mathematical model using the iDynoMiCS 2.0 platform which could allow the development of a mitigation strategy. The conditions to be tested are the quantity and type of carbon and nitrogen sources, the pH and the presence of neighbouring colonies. First results showed that colonies grown on agar have the highest extension rates at pH 5, 0.01M NO3 or NH4, and 0.1M glucose or sucrose. Interestingly, extension rates but also CO2 production was unaffected by an increase in the concentration of the C-source from 0.01M to 0.1M. On a microscale, we observed that medium containing more C resulted in a higher quantity of branches produced by a single cell and not in a higher single cell growth rate. This rapidly results in a more compact microcolony versus the more extended colonies on C-deficient media. We believe that such deeper knowledge on the growth of black fungi will help mitigate their material colonisation and deterioration. T2 - IMC12 CY - Maastricht, Netherlands DA - 09.08.2024 KW - Black fungi KW - Modelling KW - Carbon and nitrogen limitation PY - 2024 AN - OPUS4-61170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Golian, M. J. A1 - Friedman, D. A. A1 - Harrison, M. A1 - McMahon, Dino Peter A1 - Buellesbach, J. T1 - Chemical and transcriptomic diversity do not correlate with ascending levels of social complexity in the insect order Blattodea N2 - AbstractEusocial insects, such as ants and termites, are characterized by high levels of coordinated social organization. This is contrasted by solitary insects that display more limited forms of collective behavior. It has been hypothesized that this gradient in sociobehavioral sophistication is positively correlated with chemical profile complexity, due to a potentially increased demand for diversity in chemical communication mechanisms in insects with higher levels of social complexity. However, this claim has rarely been assessed empirically. Here, we compare different levels of chemical and transcriptomic complexity in selected species of the order Blattodea that represent different levels of social organization, from solitary to eusocial. We primarily focus on cuticular hydrocarbon (CHC) complexity, since it has repeatedly been demonstrated that CHCs are key signaling molecules conveying a wide variety of chemical information in solitary as well as eusocial insects. We assessed CHC complexity and divergence between our studied taxa of different social complexity levels as well as the differentiation of their respective repertoires of CHC biosynthesis gene transcripts. Surprisingly, we did not find any consistent pattern of chemical complexity correlating with social complexity, nor did the overall chemical divergence or transcriptomic repertoire of CHC biosynthesis genes reflect on the levels of social organization. Our results challenge the assumption that increasing social complexity is generally reflected in more complex chemical profiles and point toward the need for a more cautious and differentiated view on correlating complexity on a chemical, genetic, and social level. KW - Chemical ecology KW - Ecological genetics KW - Entomology KW - Evolutionary ecology PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-608260 DO - https://doi.org/10.1002/ece3.70063 SN - 2045-7758 VL - 14 IS - 8 SP - 1 EP - 13 PB - Wiley AN - OPUS4-60826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gorbushina, Anna T1 - From rocks to riches: Knufia petricola as model and expression platform N2 - Black fungi belong to different classes of Ascomycota but evolved similar morpho-physiological adaptations such as yeast-like growth and constitutive melanin formation to colonize extreme competition-free environments. They are ubiquitously found on air-exposed surfaces, from ancient marble monuments to modern solar panels. The rock inhabitant Knufia petricola was chosen to become a model for these extremotolerant black fungi. Plasmid-based and ribonucleoprotein-based CRISPR/Cas9 techniques were introduced to precisely introduce one to multiple double strand breaks into the DNA to modify, replace or add sequences to the genome either using the available selection marker systems (hygR, natR, genR, baR, suR) or by marker-free approaches. Multiplexing is very efficient, allowing for four or more simultaneous genome editing events. The newly generated cloning vectors containing the Tet on construct for doxycycline-controlled gene expression, and the validated sites in the K. petricola genome for color-selectable (pks1, phs1, ade2) or neutral insertion (igr1 to 5) of expression constructs complete the reverse genetics toolbox. One or multiple endogenous or heterologous genes can be expressed on demand from different genomic loci or from a single construct by using 2A self-cleaving peptides. We thus can express genes from synthetic clusters in a non-pigmented background (Δpks1/Δphs1). The fact that K. petricola only produces few secondary metabolites (DHN melanin, carotenoids, mycosporines and a siderophore) and plant cell-wall degrading enzymes but is capable to take the burden of acetyl-CoA-consuming metabolism and protein secretion renders K. petricola a promising host for the expression of heterologous genes encoding high-end secondary metabolites and enzymes. T2 - 12th International Mycological Congress (IMC12) CY - Maastricht, Netherlands DA - 11.08.2024 KW - Fungus KW - Genetic engineering KW - Heterologous gene expression KW - Cell factory PY - 2024 AN - OPUS4-60838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gordon, Nehemia A1 - Patrick, Andrist A1 - Hahn, Oliver A1 - Vasileiadis, Pavlos D. A1 - Calvillo, Nelson A1 - Rabin, Ira T1 - Did the Original Scribes Write the Distigmai in Codex Vaticanus B of the Bible (Vat. gr. 1209)? N2 - The fourth-century Greek Bible manuscript Codex Vaticanus B (Vat. gr. 1209) contains pairs of horizontally aligned marginal dots known as distigmai, which correspond to textual variants in other manuscripts. The production of the distigmai has been variously dated to the 4th or 16th centuries. A fourth-century date would prove the early existence of hundreds of textual variants, many of which are otherwise only witnessed by later manuscripts. Near infrared microscope reflectography combined with micro-X-ray fluorescence spectroscopy proved that the distigmai, both those categorized as “apricot” (which are visually similar to the ink of the original main text) and “chocolate” (which are visually similar to the reinking of the main text) were written with ink(s) made from chemically purified vitriol, a process that only became standard in the 16th century. As a result, there is no reasonable chance that the distigmai were written in the fourth century. Horizontal lines that have been hypothesized to function as text-critical obeloi were written in the same ink as the original main text, which differs completely from that of the distigmai. In other words, the distigmai and horizontal lines tested were not produced during the same writing session and are separated by more than 1,000 years, making it impossible for them to have functioned as conjoining text-critical symbols in the 4th century. KW - Bible manuscripts KW - New Testament KW - Paratextual features KW - Textual criticism KW - Obelos KW - Septuagint KW - XRF KW - Greek palaeography PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-622902 DO - https://doi.org/10.1163/27728641-00302005 SN - 2772-8633 VL - 3 IS - 2 SP - 125 EP - 156 PB - Brill CY - Leiden AN - OPUS4-62290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grimmer, Christoph T1 - Development, application and measurement uncertainty of emission reference materials N2 - Volatile organic compounds (VOCs) emitted by furniture and building materials can cause health issues. For an improvement of indoor air quality low emitting materials should be used. Quality assurance and –control (QA/QC) measures require an emission reference material (ERM) with a predictable emission rate of VOCs. The idea is to use porous materials as ERM, which store the VOCs inside their pores and emit them constantly. T2 - Webinar Metrology for Indoor Air Quality Reference materials for QA/QC of the emission test chamber procedure CY - Online meeting DA - 11.04.2024 KW - Emission reference materials KW - Indoor air quality KW - Materials emissions test KW - VOC PY - 2024 AN - OPUS4-59963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grimmer, Christoph A1 - Richter, Matthias A1 - Neuhaus, T. A1 - Prinz, Carsten A1 - Strzelczyk, Rebecca Skadi A1 - Colakoglu, Irem A1 - Horn, Wolfgang T1 - Towards a multi-VOC emission reference material with temporally constant emission profile for QA/QC of materials emission testing procedures N2 - Emission reference materials (ERMs) are sought after to further control and improve indoor air quality. The impregnation of porous materials with volatile organic compounds (VOCs) is a promising approach to produce ERMs. Different VOCs were used to impregnate various porous materials (mainly zeolites, activated carbons and a metal organic framework). The influence of different methodological parameters and material properties were studied to optimize the impregnation procedure and to find the best material/VOC combination. The impregnation procedure remains quite irreproducible, nevertheless, very good ERM candidates were identified. Two materials (zeolite 4 and AC 1 impregnated with n-hexadecane) showed a very stable emission over 14 days (<10 % change). Another material (AC 1 impregnated with toluene) showed a declining emission profile but with a very good in-batch reproducibility and a storage stability of up to 12 months. KW - Emission reference material KW - Porous materials KW - Indoor air quality KW - Emission test chamber KW - CO2 assisted impregnation KW - EN 16516 PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612238 DO - https://doi.org/10.1016/j.chemosphere.2024.143437 SN - 1879-1298 VL - 366 SP - 1 EP - 8 PB - Elsevier AN - OPUS4-61223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grzelec, Małgorzata A1 - Haas, Sylvio A1 - Helman-Ważny, Agnieszka T1 - Application of scanning small-angle X-ray scattering in the identification of sheet formation techniques in historical papers N2 - Among writing substrates produced historically in different regions of the world, paper is one of the most complex materials. Its complexity results not only from a variety of highly processed ingredients, which can be used in its production, but also from a variety of methods in which these materials are combined to form the fibrillar network referred to as paper. While material identification methods are well established in the analysis of historical papers, the identification of manufacturing technologies is still an under-researched topic, that requires the development of appropriate methods and measurement protocols. This paper reports on the results of a research project aimed at the application of synchrotron scanning small angle X-ray scattering (SAXS) method in the characterization of paper structure, with emphasis on the assessment of fibrillar orientation as a marker characteristic for different, historical papermaking technologies. The main objective of this study consists of the development of a measurement protocol involving the SAXS technique complemented by other analytical methods in the characterization of the fibrous paper structure. KW - SAXS KW - Paper analysis KW - Papermaking technology KW - Fiber orientation PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651594 DO - https://doi.org/10.1007/s00339-024-08157-4 SN - 0947-8396 VL - 131 IS - 1 SP - 1 EP - 16 PB - Springer Science and Business Media LLC AN - OPUS4-65159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -