TY - CONF A1 - Schmidt, Anita T1 - Neues Klassifizierungssystem N2 - Das neue Klassifizierungssystem für Lithiumbatterien nach Gefährlichkeit wird auch große Auswirkungen hinsichtlich der Verpackungsvorschriften haben. Worauf sich Hersteller und Anwender im Gefahrguttransport schon jetzt einstellen können, wird vorgestellt. Weiterhin werden hierzu die Forschungsergebnisse der BAM vorgestellt. T2 - BAM Erfa Verpackungen CY - Berlin, Germany DA - 17.09.2024 KW - Lithiumbatterien KW - Gefahrguttransport PY - 2024 AN - OPUS4-62333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien - Transport und Sicherheit N2 - Regularien und Anforderungen (zum Transport) von Lithiumbatterien. T2 - 6. Photovoltaik-Betriebs- und Sicherheitstagung CY - Berlin, Germany DA - 24.11.2022 KW - Lithiumbatterien KW - Regularien KW - Energiespeicher KW - Transport PY - 2022 AN - OPUS4-56744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neue Regeln - Klassifizierungsregeln: Was tut sich auf UN-Ebene? - TRGS 520: Es tut sich etwas auf nationaler Ebene N2 - Die Entwicklungen der Regelwerke auf nationaler und internationaler Ebene werden vorgestellt. Die BAM ist hier beteiligt und trägt mit zahlreichen Versuchsergebnissen bei, die hier erläutert werden. T2 - Fachkonferenz Lithiumbatterien CY - Göttingen, Germany DA - 23.01.2023 KW - Lithiumbatterien KW - Prüfung KW - Regelwerksentwicklung PY - 2023 AN - OPUS4-59275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Safety in transport of Li-ion batteries N2 - Safety in transport is the pre-requisite for bringing Lithium-ion batteries on the market. In order to consider the different types and degree of hazards, UN has set out to define a new classification system based on testing. BAM has participated in the test rounds and presents here the results. T2 - Technical Workshop on Advanced Materials Challenges and Standardisation Needs for Net Zero Technologies (AMCSNZT-2023) CY - New Delhi, India DA - 09.10.2023 KW - Lithium-ion batteries KW - Propagation testing KW - Safety PY - 2023 AN - OPUS4-59274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien im Seeschiffsverkehr: lassen sich zukünftig Brände verhindern? N2 - Ausgehend von der Vielzahl an Bränden im Seeverkehr, die Lithiumbatteriebränden zugeschrieben werden, wird betrachtet, wie ein sichererer Transport von Lithiumbatterien im Seeverkehr erfolgen kann und inwiefern die BAM durch Ihre Mitarbeit in der Regelwerksentwicklung und Forschung dazu beiträgt. T2 - KLIB Mitgliederforum CY - Frankfurt am Main, Germany DA - 19.03.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Seeverkehr KW - Sicherheit PY - 2024 AN - OPUS4-62324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Simulating diffusional cyclic voltammetry at rough electrodes by means of the DSDC algorithm N2 - Electrode roughness is an exceptionally important, yet oftentimes overlooked factor in electrokinetic analysis and catalyst research. Essentially any electroanalytical experiment involving an electrode with a surface which is not perfectly smooth will be subjected to more or less severe effects of roughness. This includes any circumstance where electrodes are decorated with micro- or nanoparticles and is therefore relevant for a plethora of experimental scenarios. Since the roughness-related gain in surface area scales the reaction rate – and thus the current – it is an inherently non-straightforward task to assess intrinsic electrode kinetics from experimental data of rough structures. In other words, a significant overestimation of kinetic constants may arise when rough electrodes are employed and kinetics are analyzed under the assumption of perfectly planar surfaces. For this reason, it is fundamentally interesting to approach electrode roughness from a purely theoretical point of view, since surface roughness and kinetics can be tuned in a deliberate manner for separating their individual contributions. In this study, we propose a strategy for the simulation of the most common electroanalytical technique – cyclic voltammetry – at mesoscopically rough surfaces. For this purpose, our previously introduced digital simulation - deconvolution - convolution (DSDC) algorithm [1] is employed. By modifying, the Douglas--Gunn algorithm, which is used in the digital simulation step to operate on an arbitrarily incremented spatial grid, a high numerical resolution near the electrode/electrolyte boundary and a larger spatial discretization in the bulk of the electrolyte can be used. This provides a fine resolution of artifacts of surface roughness and efficiently utilizes computational power. As a consequence, simulations can be performed on real-space data of rough electrodes which is obtained from atomic force microscopy (AFM). It is demonstrated that for an ideally reversible reaction the effects of electrode roughness on the CV response are insignificant. In contrast, for practically relevant scenarios with electrochemically irreversible or quasi-reversible kinetics, the apparent rate constants are allegedly upscaled by the area-ratio Arough/Aplanar up to a certain threshold. Qualitatively, this manifests in a lower peak-to-peak separation without a distortion of the shape of the voltammetric profile. As soon as the surface profile becomes much deeper than wide, a distortion of the CV response occurs which is associated with an increasingly finite diffusion domain. This behavior is finally explained in terms of convolution-sums and mass-transfer functions and provides a quantitative interpretation of roughness effects. T2 - Electrochemistry 2024 CY - Braunschweig, Germany DA - 16.09.2024 KW - Rough electrodes KW - Convolutive Modeling KW - Digital Simulation KW - Cyclic voltammetry KW - Redox-Flow Batteries PY - 2024 AN - OPUS4-62308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Frühwarnsystem für EV-Batterien: Prädiktion des Thermischen Durchgehens von Lithium-Ionen-Speichern N2 - Kritisch defekte Lithium-Ionen Batterien bergen ein signifikantes Gefährdungspotenzial, da die Möglichkeit eines so genannten thermischen Durchgehens (TD) besteht. Dabei handelt es sich um eine autoamplifizierende Reaktion, welche zu einer unkontrollierten Erwärmung mit Rauch- und Flammenerscheinung oder gar einer Explosion führt. Insbesondere bei großen Batterien mit einer Kapazität von über 100 kWh, stellt ein TD ein sehr großes Schadensereignis dar. Folglich gilt es, dieses Ereignis strikt zu vermeiden. Im Rahmen der Präsentation werden aktuelle Arbeiten der BAM im Bereich der TD-Früherkennung vorgestellt. T2 - Gefahrguttag 2024 CY - Hannover, Germany DA - 19.09.2024 KW - Thermisches Durchgehen KW - Lithium-Ionen Batterien KW - Automotive Anwendungen PY - 2024 AN - OPUS4-62309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Natrium-Ionen Batterien N2 - Der Bedarf an Forschung der Bundesoberbehörden zu Natrium-Batterien als neues Thema wurde identifiziert. Hier kann die BAM jedoch bereits zahlreiche Untersuchungen im Rahmen des BAM-internen Projekts "SIB-Links" vorweisen. T2 - BoB Bundes-Oberbehörden CY - Online meeting DA - 10.06.2024 KW - Natrium-Ionen Batterien PY - 2024 AN - OPUS4-62325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien - Transport und Sicherheit N2 - Fachwissen zum Transport und sicherem Umgang mit Lithiumbatterien ist eine essentielle für die Arbeit der Gefahrgutbeauftragten der Polizei. Dabei geht e nicht nur um selbstgenutzte Geräte sondern häufig auch um sichergestellte und möglicherweise beschädigte Geräte / Akkus. Diese müssen bestmöglich vor Datenverlust bewahrt werden, gleichzeitig ist die Sicherheit für die zuständigen Mitarbeiter unabdingbar. Der Vortrag dient dazu, die Zuhörer in die Lage zu versetzen, fallbezogene Entscheidungen für Maßnahmen für den sicheren Umgang und den Transport zu treffen. T2 - Polizeiakademie Niedersachsen Gefahrgutbeauftragte CY - Dannenberg, Germany DA - 10.12.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Lagerung PY - 2024 AN - OPUS4-62331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Moench, Lars A1 - Rausch, Talea T1 - Vorstellung des Berichtes Batteriezellenherstellung des Arbeitskreises Elektrische Energiespeichersysteme der Kommission für Anlagensicherheit N2 - In der Kommission Anlagensicherheit (KAS) Arbeitsgruppe Elektrische Energiespeicher wurde ein Bericht erstellt, der den Stand der Technik für die Batteriezellproduktion in Deutschland widerspiegelt und die Einstufung nach Störfallverordnung mittels einer Liste aller enthaltenen Stoffe ermöglicht. Dieser wird vorgestellt und die Anwendung der maßgeblich durch die BAM erstellte Liste erläutert. T2 - UBA Fachbereichgespräch CY - Online meeting DA - 24.10.2024 KW - Störfallverordnung KW - Batterie-Zellproduktion KW - LIthiumbatterien KW - Anlagensicherheit PY - 2024 AN - OPUS4-62327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Krug von Nidda, Jonas A1 - Schmidt, Anita A1 - Bruno, Giovanni T1 - Quantification of the Deep Discharge Induced Asymmetric Copper Deposition in Lithium‐Ion Cells by Operando Synchrotron X‐Ray Tomography N2 - AbstractLithium‐ion cells connected in series are prone to an electrical safety risk called overdischarge. This paper presents a comprehensive investigation of the overdischarge phenomenon in lithium‐ion cells using operando nondestructive imaging. The study focuses on understanding the behavior of copper dissolution and deposition during overdischarge, which can lead to irreversible capacity loss and internal short‐circuits. By utilizing synchrotron X‐ray computed tomography (SXCT), the concentration of dissolved and deposited copper per surface area is quantified as a function of depth of discharge, confirming previous findings. The results also highlight for the first time a nonuniform distribution pattern for copper deposition on the cathode. This research provides insights for safer battery cell design. KW - Lithium Ion Batteries KW - Deep Discharge KW - Computer Tomography KW - Copper Deposition KW - Litium Ion Cells PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-592717 DO - https://doi.org/10.1002/admt.202301246 SP - 1 EP - 7 PB - Wiley AN - OPUS4-59271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Bau, Alexander A1 - Setzchen, Max A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Krug von Nidda, Jonas T1 - High Precision Nail‐Penetration Setup for the Controlled Thermal Runaway Initiation of Lithium‐Ion Cells at Very Low Temperatures N2 - A high precision nail‐penetration (NP) tool for characterizing the mechanically induced thermal‐runaway (TR) of lithium‐ion battery (LIB) cells in a defined range of temperatures down to −140 °C was developed. To understand the cell specific behavior at low temperatures aiming at the determination of safe handling conditions, different scenarios are analyzed. First, accuracy tests of the NP‐tool regarding motion and penetration depth are conducted with cylindrical cells at different temperatures. Thus, postmortem computer tomographic (CT) images are compared to the data measured with the newly integrated 3‐axis force sensor which is further combined with a high‐resolution position sensor. The herein developed setup allows evaluation of the NP‐metrics at an accuracy of ±1 pierced electrode layer without CT‐scans. Further NP examinations at 20 °C of fully charged cylindrical lithium nickel manganese cobalt oxide cells reveal a reproducible minimum damage as a reliable TR‐trigger. Moreover, NP‐tests at low temperature disclose a relation of the short circuit conductivity and TR‐reactions during subsequent rethermalization to room temperature. Finally, the implementation of a novel fixture for a controlled very fast cooling of LIB‐cells during critical damage opens the way to investigate the individual steps during a TR and, thus, to gain important information of the specific TR‐mechanism of different LIB‐cells. KW - Battery Safety KW - High-precision nail penetration KW - Lithium-ion batteries KW - Abuse testing KW - Thermal runaway PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598127 DO - https://doi.org/10.1002/ente.202301379 SN - 2194-4288 SP - 1 EP - 13 PB - Wiley VHC-Verlag AN - OPUS4-59812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leonhardt, Robert A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Rieck, Arielle A1 - Markötter, Henning A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Tichter, Tim A1 - Krug von Nidda, Jonas T1 - Exploring the electrochemical and physical stability of lithium-ion cells exposed to liquid nitrogen N2 - The transport and storage of lithium-ion (Li-ion) batteries — damaged or in an undefined state — is a major safety concern for regulatory institutions, transportation companies, and manufacturers. Since (electro)chemical reactivity is exponentially temperature-dependent, cooling such batteries is an obvious measure for increasing their safety. The present study explores the effect of cryogenic freezing on the electrochemical and physical stability of Li-ion cells. For this purpose, three different types of cells were repeatedly exposed to liquid nitrogen (LN2). Before and after each cooling cycle, electrical and electrochemical measurements were conducted to assess the impact of the individual freezing steps. While the electrochemical behavior of the cells did not change significantly upon exposure to LN2 , it became apparent that a non-negligible number of cells suffered from physical changes (swelling) and functional failures. The latter defect was found to be caused by the current interrupt device of the cylindrical cells. This safety mechanism is triggered by the overpressure of expanding nitrogen which enters the cells at cryogenic temperatures. This study underlines that the widely accepted reversibility of LN2 -cooling on a material scale does not allow for a direct extrapolation toward the physical integrity of full cells. Since nitrogen enters the cell at cryogenic temperatures and expands upon rethermalization, it can cause an internal overpressure. This can, in turn, lead to mechanical damage to the cell. Consequently, a more appropriate temperature condition — less extreme than direct LN2 exposure — needs to be found KW - Lithium-ion battery KW - LN2 cooling KW - Battery characterization PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599248 DO - https://doi.org/10.1016/j.est.2024.111650 VL - 89 SP - 1 EP - 7 PB - Elsevier B.V. AN - OPUS4-59924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttcher, Nils A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Schmidt, Anita A1 - Kowal, J. A1 - Lu, Y. A1 - Krug von Nidda, Jonas A1 - Bruno, Giovanni T1 - Visualization of stepwise electrode decomposition in a nail penetrated commercial lithium-ion cell using low-temperature synchrotron X-ray computed tomography N2 - The transition towards zero carbon emissions in power generation hinges on the integration of efficient electrical energy storage systems, with lithium-ion batteries (LIBs) positioned as a pivotal technology. While generally safe, deviations in their operational guidelines due to manufacturing defects or misuse can lead to critical safety concerns, notably thermal runaway (TR) events. Internal short circuits (ISCs) are primary initiators of TR within LIBs. For abuse testing, ISCs are often triggered by nail penetration. This study explores the morphological changes and mechanisms underlying ISC-induced TR in LIBs using operando synchrotron X-ray computed tomography (SXCT) at subzero temperatures. A novel cryogenic setup was developed to control a stepwise temperature increase in the damaged sample while monitoring electrochemical characteristics and simultaneously enabling acquisition of high-resolution SXCT images. The findings reveal that conducting nail penetration at minus 80°C prevents immediate TR, enabling detailed analysis of subsequent structural and electrochemical behavior during controlled thawing. Thus, the initiation of TR processes at localized ISC sites has been observed, evidenced by voltage fluctuations and morphological changes, such as cathode material cracking and decomposition. These results underscore the importance of temperature control in mitigating TR risks and provide critical insights into the internal dynamics of LIBs under abusive conditions. The developed cryogenic SXCT methodology offers a powerful tool for non-destructive, high-resolution investigation of battery failure mechanisms, contributing to the enhancement of LIB safety. KW - Tomography KW - X-ray imaging KW - Lithium-ion battery PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-611327 DO - https://doi.org/10.1016/j.jpowsour.2024.235472 VL - 623 SP - 1 EP - 10 PB - Elsevier CY - New York, NY AN - OPUS4-61132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Hazard-Based Classification of Lithium-Ion Cells and Batteries N2 - Next to performance features, safety aspects of lithium-ion batteries (LIBs) are a crucial research field. The abuse/misuse of a LIB can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR). Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a TR-propagation. Due to the risk of a TR, special measures need to be applied while handling, storing, and transporting batteries. According to current transport regulations, all different types of lithium-ion and lithium metal cells/batteries (by means of cell format, cathode chemistry, etc.) require the same transport conditions regardless of the intensity of their reaction during abuse tests. To allow more differentiated transport requirements, the United Nations (UN) Subcommittee Transport of Dangerous Goods created an Informal Working Group (IWG) on the topic of a hazard-based classification of LIBs. BAM is one of nine laboratories working on the development of a respective classification scheme including appendant test protocols. Herein, we discuss the latest results of our safety tests on commercial LIB-cells employing the test protocols developed in the UN-IWG. Single cell tests are analysed regarding different hazardous features during the TR, e.g., cell temperature, flame occurrence, and gas amount. Next to the general occurrence of a propagation, the propagation speed is analysed by propagation tests. In total, the presented results are gathered from over 200 tests. Next to the classification of the tested cells, the data set obtained is analysed in respect to the cells’ key features, such as cell energy, state of charge and cathode type. Generally, the presented results can increase the overall understanding of the TR-mechanism supporting the design of advanced safety measures on cell level in the future. T2 - International Battery Safety Workshop CY - Ulm, Germany DA - 28.09.2023 KW - Battery Classification KW - Safe Transport KW - Thermal Runaway KW - Lithium Ion Batteries PY - 2023 AN - OPUS4-59269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttcher, Nils A1 - Sander, Luise A1 - Ulbricht, Alexander A1 - Widjaja, Martinus Putra A1 - Fellinger, Tim-Patrick A1 - Schmidt, Anita A1 - Krug von Nidda, Jonas T1 - Sodium-ion battery research @ BAM (I): investigating the thermal runaway behaviour of commercial sodium-ion battery cells N2 - Commercially available sodium-ion battery (SIB) cells, with energy densities comparable to lithium-ion battery (LIB) cells based on LiFePO4, were investigated regarding their safety behaviour under thermal abuse conditions. Tests were carried out in an inert atmosphere. The SIB-cells went into thermal runaway (TR), intriguingly, even at a rather low state of charge of 30%. The TR-event was coupled with a pronounced jelly roll ejection, challenging the interpretation of the TR-diagrams. These findings highlight the necessity of incorporating SIB-cells into the ongoing safety classification discussions for LIB-cells. KW - Sodium Ion Batteries KW - Thermal Runaway KW - Battery safety PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647652 DO - https://doi.org/10.1039/d5se00687b SN - 2398-4902 VL - 9 IS - 21 SP - 5832 EP - 5838 PB - Royal Society of Chemistry (RSC) AN - OPUS4-64765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharpmann, Philippa A1 - Leonhardt, Robert A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Tichter, Tim A1 - Krug von Nidda, Jonas T1 - Exploring restrictive overdischarge cycling as a method to accelerate characteristic ageing in lithium-ion cells N2 - This study presents a test protocol that greatly accelerates the ageing process of lithium-ion battery cells comprising a positive electrode of nickel manganese cobalt oxide while preserving their characteristic degradation upon cyclic ageing. Applying a repetitive restricted overdischarge, resulting in a depth of discharge larger than 100%, a capacity loss of 20% is achieved over five times faster compared to conventional cycling. The well-known overdischarge degradation phenomenon of copper current collector dissolution is deliberately prevented by setting a discharge cutoff voltage above the theoretical threshold of copper oxidation. Hence, the accelerated degradation can be primarily connected to solid electrolyte interphase growth. A comparative assessment of the ageing dynamics using electrochemical impedance spectroscopy and differential voltage analysis hints towards similar, characteristic degradation processes during accelerated and conventional ageing. A post-ageing examination of the electrical behaviour (i.e., coulombic and energy efficiency, capacity fade) under reference conditions reveals very little to no lasting damages caused by overdischarging. Additionally, post-mortem analysis discloses no increased copper dissolution when comparing cells subjected to accelerated and conventional ageing. Generally, the developed ageing method appears suitable for providing cells with a defined state of health at a reasonable timescale without altering the main degradation mechanisms significantly. KW - Lithium-ion cell KW - Accelerated ageing KW - Overdischarge KW - Degradation processes KW - Differential voltage analysis KW - Electrochemical impedance spectroscopy PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650917 DO - https://doi.org/10.1016/j.jpowsour.2025.239072 SN - 0378-7753 VL - 665 SP - 1 EP - 9 PB - Elsevier B.V. AN - OPUS4-65091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leonhardt, Robert T1 - Characterization of overdischarge-related degradation in commercial sodium-ion cells N2 - Sodium-ion batteries (SIBs) have recently gained significant attention as a cost-effective and sustainable alternative to lithium-ion batteries for large-scale energy storage applications and battery-electric vehicles. With their ability to be fully discharged to 0 V, they allow much safer handling and transport. The reversibility of such a complete discharge is, however, debated as the solid electrolyte interphase (SEI) formed by commonly used electrolytes in SIBs becomes unstable at low full-cell voltages. In the present study, the effects of overdischarging SIBs and the implications on their long-term impedance degradation are investigated for commercial SIB-cells, comprising sodium nickel manganese iron oxide (NaNi0.33Mn0.33Fe0.33O2) as cathode active material. During the study, extensive characterization measurements (e.g., electrochemical impedance spectroscopy, open-circuit voltage analysis, etc.) were performed at various stages of degradation. This allows the monitoring of the electrochemical characteristics of the tested SIBs. Notably, the long-term degradation behavior of the cells was significantly affected, indicating lasting changes in the passivating properties of the altered SEI. Finally, the results show that overdischarging can indeed cause irreversible changes in sodium-ion batteries, emphasizing the need to enhance their stability at low full-cell voltages to make the best possible use of their potential safety features. T2 - SBS6 – International Sodium Battery Symposium CY - Dresden, Germany DA - 03.09.2025 KW - Overdischarge of sodium ion batteries KW - Solid electrolyte interphase KW - Impedance spectroscopy KW - Battery degradation and aging PY - 2025 AN - OPUS4-65066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cornelio, Andrea T1 - NASICON Electrolytes for Room-Temperature Sodium-Sulfur Batteries with NaK Alloy Negative Electrode Interface N2 - The aim of the research is to develop a novel NASICON (NA Super Ionic CONductor) electrolyte for room-temperature (RT) sodium-sulfur (Na-S) cells employing a liquid sodium-potassium (NaK) alloy at the negative-electrode interface. The NaK alloy can improve the interfacial contact between the sodium-metal electrode and the solid electrolyte. The synthesized NASICON material must be stable with the alkali-metal alloy and provide good electrochemical performance at RT. T2 - 6th Sodium Battery Symposium CY - Dresden, Germany DA - 03.09.2025 KW - Solid Electrolyte KW - NASICON KW - Solid-state batteries KW - Sodium conductors KW - Material synthesis PY - 2025 AN - OPUS4-64080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leonhardt, Robert T1 - Deconvoluting the impact of early-life abuse conditions on the degradation of lithium-ion cells N2 - The successful repurposing of degraded lithium-ion (Li-ion) batteries in second-life applications is a vital step towards achieving a circular economy. While reusing aged Li-cells is a promising way of mitigating their overall environmental footprint, it is crucial to anticipate their future safety and performance characteristics . Unfortunately, predicting these properties is a cumbersome task, essentially caused by limited knowledge of the interference of different degradation modes in the cells’ first life. To still enable estimating of these parameters from a current state, the present study systematically investigates the impacts of abusive conditions in an early phase of the cells’ life on their subsequent degradation behavior. For this purpose, individual Li-cells are initially stressed by different measures such as overcharging, deep-discharging, plating, and deliberate combinations of the aforementioned methods. Electrochemical performance indicators are monitored during subsequent cycling of the cells which provides insights into the interdependencies of different degradation modes induced by specific stress conditions. In this manner, it is clarified whether or not the total degradation can be determined by a convolution or a superposition of individual deterioration effects and, thus, be described as a multidimensional state function. This knowledge will finally contribute to a better understanding of the performance and safety behavior of degraded Li-ion batteries which can help to successfully implement them into second-life applications. T2 - ECS Gothenburg CY - Gothenburg, Sweden DA - 08.10.2023 KW - Li-ion batteries KW - Early-life overstress KW - Ageing PY - 2023 AN - OPUS4-59221 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leonhardt, Robert T1 - Exploring the safety behavior of lithium-ion cells aged at elevated temperatures N2 - Understanding the safety characteristics of aged Lithiumion (Li-ion) batteries is essential for their effective integration into second-life applications. The SafeLiBatt project is a research initiative focused on evaluating safety-related parameters of these batteries. The presented study elucidates the impact of a cells’ state of health (SOH) on its safety behavior. Four highpower pouch cells (Li-NMC622) were exposed to elevated temperatures to achieve accelerated ageing. Subsequent thermal abuse tests were utilized to assess crucial parameters related to the thermal runaway (TR). When compared to their non-aged (begin of life, BOL) analogs, the aged cells implicated a TR-onset lowered by about 10 – 20 K. T2 - Advanced Battery Power 2023 CY - Aachen, Germany DA - 26.04.2023 KW - li-ion batteries KW - ageing KW - battery ageing PY - 2023 AN - OPUS4-59220 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Links Between Electrode Properties and Cell Performance in Commercial Sodium-Ion Batteries N2 - Our latest results of commercially purchased cylindrical sodium ion battery (SIB) cells will be presented. Two different cell types were dissasembled and thouroughly characterized on electrode as well as on material level. Both cell types comprise aluminum current collectors for anode and cathode, respectively. Furthermore, geometric electrode parameters, such as electrode size, thickness and loading, will be presented and linked to the electrical data-sheet values. Further in-depth characterization on material level revealed that both cathode active materials are composed of a cobalt free Ni-Mn-Fe-oxide. Interestingly, the cathode particles significantly differ in shape and size between the two cell types. Both anode active materials are graphite-free, and the particle structure points in both cases to a biomass-derived hard carbon material. Based on gas chromatography mesaurements coupled with mass spectrometry (GC-MS), both cell types utilize a mixture of carbonates as electrolyte, however, contain different conductive salts. Moreover, the measured, characteristic electrical features, e.g., capacity, Coulombic efficiency, and initial cycle life, will be discussed. Intriguingly, the cycling stability greatly differs between the cell types. Presumably, this behaviour can be mainly linked to the different morphology of the cathode active material. Overall, the work can give important insights in the composition and electrical behabiour of currently available SIB-cells. T2 - Sodium Battery Symposium (SBS-6) CY - Dresden, Germany DA - 03.09.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-64411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Multi-Scale Analysis of Commercially Available Sodium-Ion Cells N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cells with different specification were compared regarding electrode size, thickness and further parameters. Furthermore, the composition of the active materials and electrolyte was investigated and compared. T2 - Solid State Ionics (SSI) CY - London, United Kingdom DA - 15.07.2024 KW - Sodium Ion-Cells KW - Multi-Scale PY - 2024 AN - OPUS4-60764 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Linking Material and Electrode Properties to the Cell Performance of Two Types of Commercially Available SIBs N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - WISPER - Women in Science Promoting Energy Research CY - London, UK DA - 21.05.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-63284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Determination of safe handling and transport conditions of critically damaged lithium battery cells at low temperatures N2 - Lithium batteries are the key technology for the successful implementation of the energy transition. Nevertheless, the consequences of thermal runaway of lithium batteries pose the greatest safety risk. In particular, the transport of damaged lithium batteries poses special challenges in order to minimize the effects of thermal runaway. By developing a precision nail test rig, the positive effects of cooling damaged lithium batteries can be investigated and safe transport temperatures identified. T2 - Advanced Battery konference CY - Aachen, Germany DA - 26.04.2023 KW - Lithium-Ion Battery Safety and Testing PY - 2023 AN - OPUS4-59207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, D. A1 - Low, J. L. A1 - Li, Y.-S. A1 - Arcon, I. A1 - Koyutürk, B. A1 - Wagner, F. A1 - Ruiz-Zepeda, F. A1 - Gaberscek, M. A1 - Paulus, B. A1 - Fellinger, Tim-Patrick T1 - Resolving the Dilemma of Fe-N-C Catalysts by the Selective Synthesis of Tetrapyrrolic Active Sites via an Imprinting Strategy N2 - Combining the abundance and inexpensiveness of their constituent elements with their atomic dispersion, atomically dispersed Fe−N−C catalysts represent the most promising alternative to precious-metal-based materials in proton Exchange membrane (PEM) fuel cells. Due to the high temperatures involved in their synthesis and the sensitivity of Fe ions toward carbothermal reduction, current synthetic methods are intrinsically limited in type and amount of the desired, catalytically active Fe−N4 sites, and high active site densities have been out of reach (dilemma of Fe−N−C catalysts). We herein identify a paradigm change in the synthesis of Fe−N−C catalysts arising from the developments of other M−N−C single-atom catalysts. Supported by DFT calculations we propose fundamental principles for the synthesis of M−N−C materials. We further exploit the proposed principles in a novel synthetic strategy to surpass the dilemma of Fe−N−C catalysts. The selective formation of tetrapyrrolic Zn−N4 sites in a tailor-made Zn−N−C material is utilized as an active-site imprint for the preparation of a corresponding Fe−N−C catalyst. By successive low- and high-temperature ion exchange reactions, we obtain a phase-pure Fe−N−C catalyst, with a high loading of atomically dispersed Fe (>3 wt %). Moreover, the catalyst is entirely composed of tetrapyrrolic Fe−N4 sites. The density of tetrapyrrolic Fe−N4 sites is more than six times as high as for previously reported tetrapyrrolic single-site Fe−N−C fuel cell catalysts. KW - Fe-N-C catalyst KW - Precious-group metal-free catalyst KW - Tetrapyrrolic active-site KW - Single-site catalyst KW - Fuel cell KW - Carbon materials PY - 2021 DO - https://doi.org/10.1021/jacs.1c04884 SN - 1520-5126 VL - 143 IS - 43 SP - 18010 EP - 18019 PB - American Chemical Society AN - OPUS4-53657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koyutürk, B. A1 - Farber, E. A1 - Wagner, F. A1 - Fellinger, Tim-Patrick A1 - Eisenberg, D. T1 - A simple decagram-scale synthesis of an atomically dispersed, hierarchically porous Fe–N–C catalyst for acidic ORR N2 - Carbons doped with iron and nitrogen (Fe–N–Cs) are highly promising electrocatalysts for energy conversion reactions in the oxygen, nitrogen and carbon cycles. Containing no platinum group metals, they nevertheless compete with platinum-based catalysts in crucial fuel cell reactions, such as oxygen reduction in acid. Yet deployment of Fe–N–Cs in fuel cells requires also a flow-enhancing pore structure, and a scalable synthesis procedure – a rarely-met combination of requirements. We now report such a simple synthesis of over 10 g of an Fe–N–C catalyst with high activity towards oxygen reduction in acid. Atomically-dispersed Fe–N4 active sites were designed orthogonally and simultaneously with hierarchical micro-, meso- and macroporosity, by exploiting a dual role of magnesium ions during pyrolysis. Combining the “active site imprinting” and “self-templating” strategies in a single novel magnesium iminodiacetate precursor yielded a catalyst with high specific surface area (SSA > 1600 m2 g−1), a flow-enhancing hierarchical porosity, and high relative abundance of the most desirable D1-type Fe–N4 sites (43%, by Mössbauer spectroscopy at 4.2 K). Despite the relatively low iron contents, the catalysts feature halfwave potentials up to 0.70 V vs. RHE at pH 1 and a mass activity of 1.22 A g−1 at 0.8 V vs. RHE in RDE experiments. Thanks to the simple and scalable synthesis, this active and stable catalyst may serve as a workhorse in academic and industrial research into atomically-dispersed ORR electrocatalysis. KW - Catalysis KW - Fe-N-C catalysts KW - Fuel Cells KW - Electrochemistry PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550113 DO - https://doi.org/10.1039/d2ta00925k SN - 2050-7488 SP - 1 EP - 10 PB - Royal Society of Chemistry AN - OPUS4-55011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Titirici, M. A1 - Baird, S. G. A1 - Sparks, T. D. A1 - Yang, S. M. A1 - Brandt-Talbot, A. A1 - Hosseinaei, O. A1 - Harper, D. P. A1 - Parker, R. M. A1 - Vignolini, S. A1 - Berglund, L. A. A1 - Li, Y. A1 - Gao, H.-L. A1 - Mao, L.-B. A1 - Yu, S.-H. A1 - Díez, N. A1 - Ferrero, G. A. A1 - Sevilla, M. A1 - Szilágyi, P. Á. A1 - Stubbs, C. J. A1 - Worch, J. C. A1 - Huang, Y. A1 - Luscombe, C. K. A1 - Lee, K.-Y. A1 - Luo, H. A1 - Platts, M. J. A1 - Tiwari, D. A1 - Kovalevskiy, D. A1 - Fermin, D. J. A1 - Au, H. A1 - Alptekin, H. A1 - Crespo-Ribadeneyra, M. A1 - Ting, V. P. A1 - Fellinger, Tim-Patrick A1 - Barrio, J. A1 - Westhead, O. A1 - Roy, C. A1 - Stephens, I. E. L. A1 - Nicolae, S. A. A1 - Sarma, S. C. A1 - Oates, R. P. A1 - Wang, C.-G. A1 - Li, Z. A1 - Loh, X. J. A1 - Myers, R. J. A1 - Heeren, N. A1 - Grégoire, A. A1 - Périssé, C. A1 - Zhao, X. A1 - Vodovotz, Y. A1 - Earley, B. A1 - Finnveden, G. A1 - Björklund, A. A1 - Harper, G. D. J. A1 - Walton, A. A1 - Anderson, P. A. T1 - The sustainable materials roadmap N2 - Our ability to produce and transform engineered materials over the past 150 years is responsible for our high standards of living today, especially in the developed economies. Yet, we must carefully think of the effects our addiction to creating and using materials at this fast rate will have on the future generations. The way we currently make and use materials detrimentally affects the planet Earth, creating many severe environmental problems. It affects the next generations by putting in danger the future of economy, energy, and climate. We are at the point where something must drastically change, and it must change NOW. We must create more sustainable materials alternatives using natural raw materials and inspiration from Nature while making sure not to deplete important resources, i.e. in competition with the food chain supply. We must use less materials, eliminate the use of toxic materials and create a circular materials economy where reuse and recycle are priorities. We must develop sustainable methods for materials recycling and encourage design for disassembly. We must look across the whole materials life cycle from raw resources till end of life and apply thorough life cycle assessments based on reliable and relevant data to quantify sustainability. KW - Electrochemistry KW - Fe-N-C catalysts KW - Fuel cells KW - Catalysis PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550126 DO - https://doi.org/10.1088/2515-7639/ac4ee5 SN - 2515-7639 VL - 5 IS - 3 SP - 1 EP - 98 PB - IOP Publishing CY - Bristol AN - OPUS4-55012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rappsilber, Tim A1 - Yusfi, Nawar A1 - Krüger, Simone A1 - Hahn, S.-K. A1 - Fellinger, Tim-Patrick A1 - Krug von Nidda, Jonas A1 - Tschirschwitz, Rico T1 - Meta-analysis of heat release and smoke gas emission during thermal runaway of lithium-ion batteries N2 - Herein a meta-analysis of 76 experimental research papers from 2000 to 2021 is given about possible effects on the thermal runaway of lithium-ion battery cells. Data on the hazards of gas emissions and released heat are related to each other and differentiated by cell properties such as, cell geometry, cathode type or state of charge. Quantitative information on the total heat release in the range of 2.0–112.0 kJ Wh−1, the peak heat release rate in the range of 0.006–2.8 kW Wh−1and the smoke gas emission were extracted, normalized in terms of cell energy (Wh), combined in a data library and compared graphically. The total amount of gas emitted (3–48 mmol Wh−1) as well as the released amount of carbon monoxide (1–161 mg Wh−1) and hydrogen fluoride (2–197 mg Wh−1) were investigated as a function of the state of charge and cell geometry. The analysis reveals that the measured values are significantly influenced by the types of calorimeters and smoke gas analyzers used as well as by the type of thermal runaway trigger. This meta-analysis can serve as an important basis for any risk assessment of lithium-ion batteries. KW - Lithium-ion battery KW - Thermal runaway KW - Cathode active material KW - Heat release KW - Smoke gas emission PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-568071 DO - https://doi.org/10.1016/j.est.2022.106579 SN - 2352-152X VL - 60 SP - 1 EP - 15 PB - Elsevier CY - Amsterdam AN - OPUS4-56807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pampel, Jonas T1 - Investigating the thermal runaway behaviour of commercial lithium ion batteries: Influence of initiation mode and state of charge N2 - Lithium ion batteries (LIBs) are omnipresent in our daily lives. LIBs power our laptops and mobile phones, are the energy storage of choice for the electrification of vehicles, and play a vital role in the layout of the storage devices needed for the balancing of the grid. Research groups all over the world work on the improvement of LIBs, e.g., an increase in energy density and cycle-life as well as a decrease in costs. In recent years, investigations concerning the LIB’s safety continuously gain importance, especially, pushed by incidents with electric vehicles. They are multiple levels at which safety measures can be implemented, i.e., material, cell, battery and system level. Accordingly, the behaviour of LIBs under abuse/misuse conditions are often investigated on those levels. Here, we focus on the safety on cell level. Generally, the abuse/misuse leads to an increase in heat in the cell at worst triggering a chain of exothermic reactions. Hence, the cell’s temperature rapidly increases leading to the so-called thermal runaway (TR) possibly accompanied by flames and/or explosion of the cell. Herein, different hazardous features during the TR of different commercial cells are analysed such as temperature, flames, projectiles and toxic gases. In order to gain further insights on the parameters influencing the TR, different type of initiation modes, e.g., external heating, overcharging, nail penetration and external short circuiting are utilized. Moreover, the state of charges (SOCs) are varied to differ the amount of electrical energy present in the cells. Next to the characteristic of the TR of a single cell, the investigation of the propagation of the TR from one cell to another is an important parameter, as a battery is usually composed of multiple cells. Due to the close packaging of the single cells, the TR of one cell is often able to initiate the TR of the surrounding cells, finally, causing the TR of the whole battery. Herein, the propagation ability is studied depending on the cell type and SOC. Finally, the results will be used to formulate (cell specific) conditions for a safe transport of LIBs. Moreover, the gained knowledge can support the development of advanced measures to increase the safety on cell level in the future. T2 - Advanced Battery Power Conference CY - Online meeting DA - 28.01.2021 KW - Abuse Tests KW - Lithium-Batteries KW - Thermal Runaway PY - 2021 AN - OPUS4-54060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Commercially Available Sodium-Ion Cells: Links between Material and Electrode Properties and the electrochemical Performance N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - MATSUS Conference 2025 CY - Sevilla, Spain DA - 03.03.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Linking Material and Electrode Properties to the Cell Performance of Commercially Available SIBs N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells.[1,2] Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Advanced Battery Power 2025 CY - Aachen, Germany DA - 01.04.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Comparison of Commercially Available SIBs: Linking Material and Electrode Properties to Cell Performance N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Batterieforum 2025 CY - Berlin, Germany DA - 21.01.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Löschwasseruntersuchungen bei Bränden von Energiespeichern mit Lithium-Ionen-Zellen (LöwE) N2 - Die Untersuchung der Zusammensetzung des Löschwassers bei Bränden von Lithium-Ionen-Batterien ist von hohem Interesse. Bisher sind nur wenige bzw. unzureichende Studien in diesem Themenfeld vorhanden. T2 - BAM-UBA-Behördenerfahrungsaustausch 2023 CY - Berlin, Germany DA - 12.06.2023 KW - Lithium-Ionen-Batterien KW - Löschwasser KW - Sicherheit PY - 2023 AN - OPUS4-59273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Linking Key Features of Commercial Lithium-Ion Cells to Thermal Runaway Effects and Propagation Behavior N2 - Lithium-ion batteries (LIBs) are essential for the electrification of vehicles and play an important role for stationary storage units needed for grid-balancing. Research groups all over the world work on the improvement of LIBs regarding an increase in energy density as well as cycle-life and a decrease in costs. Next to these research topics, a continuously uprising and crucial field is safety features of LIBs, which can be implemented at different levels, such as material, cell, battery and system level. The abuse/misuse of a LIB can cause an internal release of heat which can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR), possibly leading to flames and/or explosion of the cell. Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a so-called propagation, possibly, causing the TR of the whole battery. Ideally, easily obtainable key features of a certain cell – such as cathode type, cell format, cell energy and state of charge (SOC) - could allow the prediction of its behaviour under abuse conditions. In the present study, we will discuss the latest result of our safety tests on cell level employing an external heater as TR-trigger. Single cell tests will be analysed regarding different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, gas amount and gas composition. Moreover, the possibility of a TR-propagation and the respective propagation speed will be gained from propagation tests utilizing six cells with identical SOC. In total, the study comprises over 200 tests on cell level. The gained data set is analysed in respect to the cell parameters, such as cell format, cell energy, SOC and the cathode type as well as the atmosphere (air vs. N2) present during the test. A special focus is put on the discussion of general conclusions linking cell parameters to TR-effects and propagation behaviour. The findings regarding common conclusions between key features and TR-effects can enable a rather facile selection process of cells/batteries for certain applications according to specific safety targets. Moreover, it allows to choose cell-specific safety measures, suitable during operation. In further works, the study will be extended to end-of-first life cells yielding important conclusions regarding crucial safety aspects for the implementation of those cells in 2nd-life application. Generally, the presented results can increase the overall understanding of the TR mechanism supporting the design of advanced measures to enhance the safety on cell level in the future. T2 - 224th ECS Meeting CY - Gothenburg, Sweden DA - 08.10.2023 KW - Lithium Ion Batteries KW - Thermal Runaway KW - Propagation KW - Safety PY - 2023 AN - OPUS4-59268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharpmann, Philippa T1 - In-situ Quantification of the Ageing Dynamics in Lithium-Ion Cells up to Failure-Near Conditions N2 - Implementing end-of-life (EOL) lithium-ion batteries from automotive applications in stationary energy storages is of utmost relevance for a sustainable handling of scarce resources. Beneficial from an economic and ecological perspective, such second-life applications urgently require a guarantee for safe operation. Unlike the state of health (SOH), defined by classical performance indicators such as capacity and voltage, the state of safety (SOS) of an aged battery cannot be assessed straightforward. Its determination requires a plethora of cells to be tested which is a particular challenge for new technologies with limited access to EOL batteries. For providing cells with a defined SOH at a reasonable timescale, we herein propose a novel method of greatly accelerating the ageing process of lithium-ion batteries. In a preliminary test series, lithium-ion NMC pouch cells are exposed to incrementally increasing temperatures, current rates and/or states of charge (SOC), until thermal runaway is induced. In this manner, the critical state in proximity to cell failure is spotted for individual and combined stress parameters. Based on this knowledge, cell-specific test parameters for heavily accelerated ageing are developed. In this protocol, electrical abuse conditions are defined by over/under charging and high current rates. Typically, the cells are cycled utilizing a depth of discharge above 100 %. The accelerated aging dynamics under these critical conditions are monitored by systematic capacity, open circuit voltage and electrochemical impedance spectroscopy (EIS) measurements. This enables a comparative assessment of the electrical behaviour, following conventional vs. heavily accelerated ageing. Such knowledge will in turn help to define the threshold to which cyclic ageing can be accelerated without changing the characteristic degradation mechanisms of lithium-ion batteries. T2 - 244th ECS Meeting CY - Gothenburg, Sweden DA - 08.10.2023 KW - Lithium-Ion Battery KW - Safety KW - Ageing PY - 2023 AN - OPUS4-61490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Low Temperature Tomographic In-Situ and Operando Studies in Energy Research N2 - Using low temperatures empowers in-depth investigations of abuse processes in Li-ion cells. A thermal runaway (TR) can be suppressed also on material level at low temperatures.The rethermalization of a critical damaged cell not always leads to a TR. Using the snyergies at BAM enables now In-depth investigation of low temperature inertisation mechanisms in commercial Lithium-Ion-Batteries. In future the synergies will be used for in-depth investigation of other abuse processes in commercial cells e.g., plating or aeging. T2 - HZB Usermeeting CY - Berlin, Germany DA - 11.12.2024 KW - Lithiumbatteries KW - Thermal Runaway KW - Sychrotron computer tomopgrahy KW - Low temperature PY - 2024 AN - OPUS4-62300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Investigating thermal runaway effects and propagation behaviour of various types of commercial lithium-ion cells N2 - Lithium-ion battery (LIB) powered devices, such as laptops, mobile phones and power tools are ubiquitous in our daily lives. Moreover, LIBs are essential for the electrification of vehicles, and play an important role for stationary storage units needed for grid-balancing. The improvement of LIBs, in terms of increasing energy density as well as cycle-life and decreasing costs, is tackled by numerous research groups all over the world. In the last years, research regarding safety aspects has steadily gained more interest. The safety of LIBs can be implemented at different levels, such as material, cell, battery and system level. The abuse/misuse of an LIB can lead to an internal increase in heat which can trigger a chain of exothermic reactions on cell level. Thus, the cell temperature increases dramatically causing the so-called thermal runaway (TR). This process can lead to flames and/or explosion of the cell. Furthermore, the TR of one cell can initiate the TR of adjacent cells causing the so-called propagation, possibly, leading to the TR of the whole battery. Herein, we will show the latest result of our safety tests on cell level employing an external heater as TR-trigger. Regarding single cell tests, we will compare different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, and toxic gases, depending on the cell format, cell energy and the cathode type. The same cell parameters will be used to discuss the results of the propagation tests. Moreover, the influence of the state of charge (SOC) and the present atmosphere (air vs. N2) as well as the repeatability will be discussed. Overall, the study comprises over 180 tests on cell level. The findings regarding the TR behaviour can be used to create a hazard-classification scheme of LIBs, e.g., allowing the definition of (cell type specific) conditions for a safe transport. Furthermore, the results can increase the general understanding of the TR mechanism promoting the development of advanced measures to enhance the safety on cell level in the future. T2 - Advanced Battery Power 2023 CY - Aachen, Germany DA - 27.04.2023 KW - Thermal Runaway KW - Lithium Ion Batteries KW - Safety PY - 2023 AN - OPUS4-59267 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim A1 - Böttcher, Nils A1 - Schmidt, Anita A1 - Krug von Nidda, Jonas T1 - Exploring the Low-Temperature Threshold for Reactions in Commercial Lithium-Ion Cells N2 - Low-temperature passivation of lithium-ion batteries (LIBs) can reduce the probability of thermal runaway events [1]. In this context, we explore the thermal threshold at which reactions in commercial Li-cells become feasible. It is found that electrochemical reactions take place even below the first phase transition of the electrolyte. Finally, it is concluded that the passivation temperature for all samples in our study does not require cryogenic conditions which is of great relevance for defining the conditions for a safe transportation. T2 - Advanced Battery Power Konferenz CY - Münster, Germany DA - 10.04.2024 KW - Batteries KW - Thermal passivation KW - Arrhenius-law KW - Cyclic voltammetry KW - Chronoamperometry PY - 2024 AN - OPUS4-62307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Visualizing the progression of the thermal runaway in lithium-ion-cells by controlled abuse tests at low temperatures N2 - Due to their increasing energy density, lithium-ion-batteries (LIBs) play a key role in the traffic energy transition. Regarding their safety behavior, the main challenge of LIB-cells remains the thermal runaway (TR) process. In situ/operando investigations of the TR on commercial cells is possible with radiographic and computer tomographic measurements. Nonetheless, high resolution visualization of the TR persists as a challenge due to the high progression speed of the TR-process itself. Generally, performing abuse tests at cryogenic temperatures allows to slow down or even prevent the TR. Nevertheless, not all abuse methods are suitable for TR investigations at low temperatures. Nail penetration is an appropriate option, however, contains numerous unknown parameters and therefore suffers regarding reproducibility. Herein, a self-developed high precision nail-penetration-setup is introduced, approaching the necessary mechanically reproducibility with controlled temperatures down to -190°C. The setup allows the preparation of critically abused, however, at cryogenic temperatures stable LIB-cells. These cells were controlled rethermalized to room temperature during synchrotron x-ray computer tomography (SXCT) with a pixel size up to 0.7 μm. During this measurement, the temperature and voltage of the cell is monitored allowing the visualization of the initial internal cell reactions. This study reveals the relation between internal reactions and cell voltage. Finally, the developed set-up enables in-depth analysis of thermal runaway behavior down to material level for various commercial battery cells in the future. T2 - International Battery Safety Workshop CY - Ulm, Germany DA - 28.09.2023 KW - Thermal Runaway KW - Lithium Ion Batteries KW - Computer Tomography PY - 2023 AN - OPUS4-59270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Markötter, Henning T1 - In situ tomographic imaging with hard x rays at Bamline (BESSY II) N2 - The BAMline at the synchrotron X-ray source BESSY II (Berlin, Germany) is supporting researchers especially in materials science [1]. As a non-destructive characterization method, synchrotron X-ray imaging, especially tomography (SXCT) with hard X-Rays, plays an important role in structural 3D characterization. The imaging capabilities allow for in-situ and operando experiments. In this presentation the equipment, data handling pipeline as well as various examples from material science are presented. In series-connected lithium-ion cells are susceptible to an electrical safety hazard called over-discharge. Here the behavior of copper dissolution and deposition during over-discharge is presented, which leads to irreversible loss of capacity and internal short circuits. The concentration of dissolved and deposited copper is quantified. Also, a non-uniform distribution pattern of copper deposition on the cathode is shown. The second example deals with an Al alloy 7017 customized for a 3d-printing process by means of laser-based powder bed fusion (PBF-LB) technique. These advanced alloys have a significantly higher modulus of elasticity than conventional Al alloys, making them attractive for applications requiring high stiffness. SXCT during In-situ tensile tests confirmed that fracture initiation strongly depends on defects created during printing. However, the cracks are deflected from decohesion around inclusions/precipitates embedded in the Al matrix, increasing ductility. Low temperature cofired ceramic (LTCC) multilayer housings offer 3D-circuits for a wide range of applications in telecommunications, microsystems and sensor technology. Such housings are produced by combining structured and metallized ceramic layers using tape-casting and multilayer technology. The characterization of the integrity, deformation, defects, and positioning of the internal metal features was carried out using in-situ SXCT at up to 950°C. A high-precision nail penetration tool was developed to characterize the mechanically induced thermal runaway (TR) of lithium-ion battery (LIB) cells in a dynamic temperature range down to -190 °C. To investigate safety-specific low-temperature transport conditions, the damaged cells were tomographically imaged during thawing. T2 - ICTMS - International Conference on Materials and Structures 2024 CY - Cape Town, South Africa DA - 01.07.2024 KW - Synchrotron radiation KW - X-ray tomography KW - Li-ion battery PY - 2024 AN - OPUS4-60658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharpmann, Philippa T1 - Segregating the Degradation Mechanisms in Lithium-Ion Cells during Strongly Accelerated Ageing with Critically Extended Voltage Ranges N2 - Repurposing end-of-life (EOL) lithium-ion batteries from mobile applications, such as electric vehicles, is of utmost importance for a sustainable handling of scarce resources. For an economically and ecologically desirable reuse of aged batteries in second-life applications, a guarantee for safe and reliable operation is urgently required. However, the assessment of the state of safety (SOS) is not straightforward, as multiple abuse cases, variables and interactions need to be considered [1]. Therefore, defining safety parameters and test procedures, as well as determining the SOS requires a plethora of aged cells to be tested. In this study, a novel method of greatly accelerating the ageing process of lithium-ion batteries is proposed. Overcharging and overdischarging are embedded in cyclic ageing, continuously employing a depth of discharge larger than 100 %. Different electrical abuse conditions (overcharge, overdischarge, high current rates) are applied on lithium-ion NMC and LFP pouch cells in a preliminary test series. In this manner, the cells are stressed until a cell failure or a thermal runaway is induced. Thus, the critical state in proximity to a cell failure is spotted for individual and combined stress parameters. Based on this knowledge, a test protocol for strongly accelerated ageing with cell-specific, abusive electrical parameters is developed. The aging dynamics under these critical conditions are monitored by systematic capacity, open circuit voltage and electrochemical impedance spectroscopy (EIS) measurements. This enables an assessment of the degradation mechanisms induced by overdischarge and overcharge cycling. A special focus is set on the comparative assessment of the electrical behaviour, following conventional vs. greatly accelerated ageing. This novel method is suitable for providing cells with a defined SOH at a reasonable timescale. Furthermore, the results are of high relevance for the evaluation to which degree cyclic ageing can be accelerated without changing the characteristic degradation mechanisms of lithium-ion batteries. T2 - Advanced Battery Power Conference 2024 CY - Münster, Germany DA - 10.04.2024 KW - Lithium-Ion Battery KW - Safety KW - Ageing PY - 2024 AN - OPUS4-61492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Single Cell Exchange in Battery Packs – Sustainability vs. Safety Aspects N2 - Lithium-ion batteries usually consist of numerous individual cells. There is ongoing discussion about enhancing sustainability by considering the replacement of heavily aged or damaged cells. Nevertheless, the planned replacement of individual cells poses significant challenges in ensuring the required reliability and safety of the refurbished device. T2 - KLIB Gesprächsrunde Batteriesysteme CY - Online meeting DA - 16.05.2023 KW - Lithium Ion Batteries KW - Lithium Ion Cells KW - Cell Exchange KW - Safety KW - Sustainability PY - 2023 AN - OPUS4-59272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leonhardt, Robert A1 - Krug von Nidda, Jonas A1 - Andrae, Dirk A1 - Schmidt, Anita A1 - Kowal, Julia A1 - Tichter, Tim T1 - Reconstructing the distribution of relaxation times with analytical basis functions N2 - The present work proposes the implementation of non-singular basis functions into the algorithm for reconstructing the distribution of relaxation times (DRT) function of impedance data. These functions reflect the dispersed and asymmetrical nature of non-ideal capacitive–resistive processes. Inclusion is achieved by combining the singular Debye distribution basis with distributed relaxation functions, such as those derived from the analytical models of Cole–Cole and Havriliak–Negami. The shapes of the introduced basis functions are described by constant parameters, for which an empirical optimization approach is provided alongside. Using synthetic impedance data of non-ideal capacitive–resistive processes subjected to white noise, it is shown that the demand for regularization can be reduced significantly by using distributed bases. To underline the practical relevance of non-singular basis functions in DRT reconstruction, an experimental study comprising 100 sodium-ion and 80 lithium-ion ommercial cells is presented. In this context, it is shown that auxiliary information from the non-ideal nature of real-world electrochemical processes is outsourced into the basis and, hence, easily filtered out of the resulting DRT. This facilitates the separation of single processes without post-DRT curve fitting and thus improves the interpretation and classification of impedance data significantly. KW - Electrochemical Impedance Spectroscopy; KW - Distribution of relaxation times KW - Basis function KW - Cole-Cole KW - Cole-Davidson KW - Havriliak-Negami PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-635486 DO - https://doi.org/10.1016/j.jpowsour.2025.237403 SN - 0378-7753 VL - 652 SP - 1 EP - 11 PB - Elsevier B.V. AN - OPUS4-63548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Markötter, Henning T1 - Tomographic Imaging Capabilities with hard X-Rays at BAMline (Bessy II) N2 - The BAMline at the synchrotron X-ray source BESSY II (Berlin, Germany) is supporting researchers especially in materials science. As a non-destructive characterization method, synchrotron X-ray imaging, especially tomography with hard X-Rays, plays an important role in structural 3D characterization. The imaging capabilities allow for in-situ and operando experiments. In this presentation the equipment, data handling pipeline as well as various examples from material science are presented. T2 - Correlative Materials Characterization Workshop 2023 CY - Brno, Czech Republic DA - 09.11.2023 KW - Tomography KW - X-ray imaging KW - Li-ion battery PY - 2023 AN - OPUS4-58958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dayani, Shahabeddin A1 - Markötter, Henning A1 - Schmidt, Anita A1 - Widjaja, Martinus Putra A1 - Bruno, Giovanni T1 - Multi-level X-ray computed tomography (XCT) investigations of commercial lithium-ion batteries from cell to particle level N2 - Adopting X-ray computed tomography (XCT) for ex-situ characterization of battery materials has gained interest in the past decade. The main goal of this paper is to demonstrate the effectiveness of several X-ray computer tomography techniques to study commercial batteries. General guidelines are provided to select the most suitable imaging equipment and parameters for investigations of lithium-ion batteries, spanning the length scales from cell to electrode, down to particle level. Relevantly, such parameters would also be suitable for operando experiments. Safety mechanisms and manufacturing inconsistencies at cell level as well as defects and inhomogeneity in cathode and anode is illustrated and quantified. Furthermore, relation of beam energy and sample-detector-distance on contrast retrieved from attenuation and phase shift is inspected using Synchrotron XCT. KW - Non-destructive testing KW - X-ray computed tomography KW - Synchrotron X-ray computed tomography KW - Lithium-ion battery PY - 2023 DO - https://doi.org/10.1016/j.est.2023.107453 SN - 2352-152X VL - 66 SP - 107453 PB - Elsevier Ltd. AN - OPUS4-57512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pfaff, Jonas A1 - Schopferer, Sebastian A1 - Markötter, Henning A1 - Rack, Alexander A1 - Bruno, Giovanni A1 - Schmidt, Anita A1 - Tichter, Tim A1 - Böttcher, Nils T1 - High-speed synchrotron radiography of nail penetration-induced thermal runaway: Understanding the explosive behavior of commercial sodium-ion batteries with NFM cathode N2 - The dynamics of mechanically initiated thermal runaway (TR) events in cylindrical 18650 cells with NFM (Na(Ni1/3Fe1/3Mn1/3)O2), LFP (LiFePO4), and NMC532 (LiNi1/2Mn1/3Co1/5O2) cathode chemistries were investigated using high-speed synchrotron X-ray imaging. Structural similarity index measures (SSIM) were employed to identify and track rapid structural changes. In this manner, thermal decompositions and internal propagation dynamics, influencing the safety mechanisms of the cells, were studied. This lead to two major findings: (I) Among NFM, LFP, and NMC532 cells, the TR-characteristics differ significantly in temperature and internal propagation speed. Internal safety mechanisms appear, however, visually similar. Among all samples, LFP cells exhibit higher safety performance concerning the initiation of TR by nail penetration and the progression of TR. (II) The NFM cells used in this study displayed an almost explosive TR. This finding appears counterintuitive on a first glance, since sodium-ion batteries are usually considered safe. High-speed imaging revealed that the explosive TR is not necessarily caused by the thermochemical decomposition reactions, but rather by a failure of the venting mechanism. This results in a significant pressure buildup within the cell upon TR initiation and eventually a severely violent TR. These results underline that battery safety depends on many factors and not solely on optimized cell chemistries or materials. KW - High-speed X-ray radiography KW - Synchrotron X-rays KW - 18650 KW - SIB KW - Na-NFM KW - Structure similarity index measure PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642649 DO - https://doi.org/10.1016/j.powera.2025.100188 SN - 2666-2485 VL - 36 SP - 1 EP - 7 PB - Elsevier Ltd. AN - OPUS4-64264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Eine sichere Zukunft für Lithium-Ionen Batterien N2 - Eine sichere Zukunft hat eine Technologie dann, wenn sie die Gesellschaft auch von ihrer Sicherheit überzeugen kann. Dies ist insbesondere für Lithiumbatterien von hoher Bedeutung. Die BAM trägt auf den verschiedene Ebenen auf vielfältige Art und Weise dazu bei, diese Sicherheit zu untersuchen und zu verbessern. T2 - 4. Batterieforum Berlin Brandenburg CY - Potsdam, Germany DA - 22.11.2024 KW - LIthiumbatterien KW - Sicherheit PY - 2024 AN - OPUS4-62328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Lithium und Natrium Ionen Batterien: Eine Frage der Sicherheit - Aktuelle und zukünftige Herausforderungen für die Kreislaufwirtschaft N2 - Der Markt für Energiespeicher befindet sich in einer Phase intensiver technologischer Diversifizierung. Neben etablierten Lithium-Ionen-Batterien gewinnen neue Systeme wie Natrium-Ionen-Batterien und künftige Technologien, z.B. Festkörperbatterien, zunehmend an Bedeutung. Dies stellt neue Anforderungen an Handhabung, Logistik und insbesondere das Recycling respektiver Systeme. Gleichwohl die Batterieverordnung einen künftigen Einsatz von Rezyklat in bei der Herstellung von Batterien vorsieht, ist bislang wenig darüber bekannt, wie sich recycelte Materialien auf Batteriesicherheit-, Leistungsfähigkeit- und Lebensdauer auswirken. Alternativ zu einem direkten Recycling gewinnt ebenso die Verlängerung der Batterielebensdauer durch so genannte „Second-life Anwendungen“ zunehmend an Interesse. Durch verbesserte Methoden zur Vorhersage von Lebensdauer, Restlebensdauer und Betriebssicherheit könnten Batterien länger im Einsatz gehalten werden, was zunehmend Ressourcen schonen würde. Im Rahmen dieses Vortrages werden die o.g. Themen in einem umfassenden Kontext des Gesamtsystems „Batterie“ diskutiert und aktuelle Entwicklungen aus einem regulatorischen und wissenschaftlichen Blickwinkel zusammenfassend dargelegt. T2 - TraWeBa-Kongress CY - Leipzig, Germany DA - 13.05.2025 KW - Recycling von Batterien KW - Thermisches Durchgehen KW - Second-Life Anwendungen KW - Batteriekreisläufe PY - 2025 AN - OPUS4-65076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neuartige Akku‘s/Batterien – Inhaltsstoffe und Reaktionsprodukte N2 - Die Inhaltsstoffe von Batterien sowie die Reaktionsprodukte beim Thermischen Durchgehen werden vorgestellt. T2 - 28. Sitzung der BfR-Kommission „Bewertung von Vergiftungen CY - Berlin, Germany DA - 04.04.2022 KW - Lithiumbatterien KW - Inhaltsstoffe PY - 2022 AN - OPUS4-56755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Second life für E-Akkus N2 - Um die Nachhaltigkeit von Lithiumbatterien zu gewährleisten, kommt neben dem Recycling der Rohstoffe auch eine Weiternutzung von für die Erstanwendung nicht mehr ausreichend leistungsstarken Batterien aus der Erstanwendung in Frage. Dabei sind auch Sicherheitsaspekte zu beachten. T2 - Berlin Science Week 2021 CY - Online meeting DA - 10.11.21 KW - Lithium Batterien KW - Recycling KW - Second Life KW - State of Safety PY - 2021 AN - OPUS4-54178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Handling and Transport of defective lithiumbatteries N2 - Safe handling and transport of Lithiumbatteries is fundamental for their global trade and use. BAM is the German competent authority responsible for the transport of defective lithium batteries and as such approves transport conditions and packaging for the transport. Also BAM is providing the test protocol for fire testing of packagings. Results and topics around safe transport are described and discussed. T2 - Sino-German Workshop on Dangerous Goods Packaging CY - Online meeting DA - 27.11.2024 KW - Lithium batteries PY - 2024 AN - OPUS4-62330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Aktuelle Versuche der BAM N2 - Da die Exkursion zur BAM pandemiebedingt entfallen musste, wurden verschiedene Versuche aus den Bereichen Verpackungen und Lithiumbatterien online vorgestellt T2 - 18. Gefahrgut-Technik-Tage Berlin 2021 CY - Berlin, Germany DA - 18.11.21 KW - Gefahrgutverpackungen KW - Kisten aus Wellpappe KW - Fallprüfung KW - Lithiumbatterien PY - 2021 AN - OPUS4-54179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien: Anforderungen für die Beförderung von beschädigten Batterien und Überblick über die UN TDG Arbeitsgruppe zur gefahrenbasierten Klassifizierung N2 - Lithiumbatterien: Anforderungen für die Beförderung von beschädigten Batterien und Überblick über die UN TDG Arbeitsgruppe zur gefahrenbasierten Klassifizierung BAM ist beteiligt in den Arbeitsgruppen und stellt eigene Prüfergebnisse vor. T2 - IAA 2022 Transportation, Gefahrguttag des BMDV, "Aktuelle Entwicklungen im Gefahrgutrecht und Erhöhung der Sicherheit von Gefahrgutfahrzeugen" CY - Hannover, Germany DA - 21.09.2022 KW - Lithiumbatterien KW - Energiespeicher KW - UN TDG Lithiumbatterien PY - 2022 AN - OPUS4-56742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Herausforderung: Verpackungen von Lithiumbatterien N2 - Je nach Zustand bestehen unterschiedliche Anforderungen an Verpackungen zum Transport von Lithiumbatterien. Hierbei sind bestimmte Prüfungen und Kriterien zu betrachten. Aktuell besteht insbesondere der Bedarf an Verpackungen für kritisch defekte Batterien. Innovative Lösungen sind gefordert. T2 - Workshop AG Future Markets New Energy Packaging CY - Online meeting DA - 12.03.2021 KW - Lithium Batterien KW - Gefahrgutverpackungen PY - 2021 AN - OPUS4-54181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by glow-discharge optical emission spectroscopy N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - Adlershofer Forschungsforum 2022 CY - Berlin, Germany DA - 11.11.2022 KW - Lithium Ion Batteries KW - GD-OES KW - FIB KW - SEM KW - EDX PY - 2022 AN - OPUS4-56246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Anita T1 - Batterien sicherer machen - Interview N2 - Im Batterietestzentrum der BAM werden Untersuchungen durchgeführt, um die Sicherheit von Lithiumbatterien bewerten zu können. Dies ermöglicht der BAM, die Politik zu beraten und die Regelwerksentwicklung kompetent mitzugestalten. KW - Lithiumbatterien KW - Gefahrgut KW - Sicherheit PY - 2024 SN - 0016-5808 IS - 9 SP - 8 EP - 9 PB - Storck CY - Hamburg AN - OPUS4-62335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Sicherheit von Lithium-und Natrium-Batterien - Brandprüfungen und Sicherheitsmaßnahmen N2 - Die Präsentation gibt einen ganzheitlichen Überblick im sicheren Umgang mit elektrochemischen Energiespeichertechnologien. Ferner enthält diese Präsentation einen Überblick über die aktuell an der BAM durchgeführten Forschungsprojekte und hoheitlichen Aufgaben mit Bezug diesen Energiespeichern T2 - Lehrgang "Moderne elektrochemische Energiespeicher" (905350) CY - Mannheim, Germany DA - 16.09.2024 KW - Lithiumbatterien KW - Thermal Runaway KW - Sicherheit KW - Natriumbatterien PY - 2024 AN - OPUS4-62302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Electroanalytical experiments at macroporous electrodes for redox-flow batteries N2 - Macroporous carbon felts (CFs) are the prevalently used electrode material for redox-flow batteris. Owing to their large internal surface area, these structures can efficiently drive the Faradaic reactions in a RFB. However, the electrochemical characterization of novel CFs, or modified CF-materials is a cumbersome task. This is essentially related to the complex mass-transport phenomena which are convoluted with the electrode kinetics. This talk will focus on ex-situ cyclic voltammetry and operando electrochemical impedance spectroscopy as electroanalytical techniques for porous RFB electrodes. Common pitfalls in the voltammetric analysis of CFs are elucidated and recent strategies for modeling and evaluating CV experiments on porous structures are introduced. Finally, a method based on electrochemical impedance spectroscopy is introduced which allows for an operando fingerprinting of electrochemical reactions in a vanadium-based RFB. T2 - Flow4U-Event CY - Eindhoven, Netherlands DA - 08.04.2024 KW - Porous Electrodes KW - Redox-Flow Batteries KW - Digital Simulation KW - Convolutive modeling KW - Impedance Spectroscopy KW - Distribution of Relaxation Times PY - 2024 AN - OPUS4-62304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - The DSDC Algorithm - A Universal Strategy for Simulating Voltammetry of Rough and Porous Electrodes N2 - Porous electrodes or electrodes with rough surfaces offer a multitude of tailored applications. The theoretical treatment of such structures is, however, challenging since their voltammetric profile is a convolution of the time-dependent current with an inherently random mass-transfer function. Since the latter quantity has no analytical solution, the classical convolutive techniques cannot be applied. Therefore, simulations have been based on severe simplifications of the diffusion space [1,2] or were performed by means of digital simulation. Unfortunately, the latter approach becomes computationally prohibitive when a large and/or highly resolved, three-dimensional diffusion space needs to be considered. To mitigate these problems, we introduce the digital simulation, deconvolution, convolution (DSDC) algorithm, consisting of four successive steps [3]. Firstly, the three-dimensional image of the electrode under investigation is extracted via micro X-ray computed tomography (µ-CT) or atomic-force microscopy (AFM). Subsequently, the purely mass-transfer controlled current of this spatial template is generated by means of digital simulation. In the third and fourth steps, the mass-transfer function is extracted for a set of discrete points in time by numerical deconvolution and finally used for classical convolutive simulations. In this manner, any simplification of the diffusion domain becomes obsolete and the advantages of digital simulation and convolutive modelling are most favourably combined. Finally, this DSDC-algorithm provides an interdisciplinary connection of ex-situ imaging and in-situ electrochemistry which results in excellent agreement of simulated and experimentally acquired data. T2 - Bunsentagung 2024 CY - Aachen, Germany DA - 25.03.2024 KW - Porous Electrodes KW - Convolutive Modeling KW - Digital Simulation KW - Diffusion KW - Redox-Flow Batteries PY - 2024 AN - OPUS4-62303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leonhardt, Robert T1 - Impedance-based characterization of the overstress-related degradationin alkali metal-ion cells N2 - The successful repurposing of degraded alkali metal-ion batteries in second-life applications is a vital step towards achieving a circular economy. While reusing aged cells is a promising way of mitigating their overall environmental footprint, it is crucial to anticipate their future safety and performance characteristics. Unfortunately, predicting these properties is a cumbersome task, essentially caused by limited knowledge of the interference of different degradation modes in the cells’ first life. To still enable estimating of these parameters from a current state, the present study systematically investigates the impact of abusive conditions in an early phase of the cells’ life on their subsequent degradation behavior. For this purpose, individual lithium-ion and sodium-ion cells are initially stressed by different measures such as deep-discharging, high-temperature conditions, and deliberate combinations of the aforementioned methods. Electrochemical performance indicators are monitored during subsequent cycling of the cells, which provides insights into the interdependencies of different degradation modes induced by specific stress conditions. In this manner, it is clarified whether or not the total degradation can be determined by a convolution or a superposition of individual deterioration effects and thus, be described as a multidimensional state function. This knowledge will finally contribute to a better understanding of the performance and safety behavior of degraded batteries which can help to successfully implement them into second-life applications. T2 - Doktorandenseminar der Technischen Universität Berlin CY - Berlin, Germany DA - 30.09.2025 KW - Alkali metal-ion batteries KW - Electrochemical performance indicators PY - 2025 AN - OPUS4-65068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Lithiumbatterien, Natrium-Ionen Batterien, Festkörperbatterien - Wohin geht die Regelwerksentwicklung? N2 - Der Markt für Energiespeicher befindet sich in einer Phase intensiver technologischer Diversifizierung. Neben etablierten Lithium-Ionen-Batterien gewinnen neue Systeme wie Natrium-Ionen-Batterien und künftige Technologien wie Festkörperbatterien zunehmend an Bedeutung. Dies stellt jedoch neue Anforderungen an die Handhabung und Logistik respektiver Systeme und rückt die Klassifizierung von Batterien nach Gefährlichkeit stärker in den Fokus. In diesem Kontext gilt es Transportprozesse zu vereinfachen und simultan die Sicherheit zu erhöhen. Im Rahmen dieses Vortrags werden aktuelle und kommende Batterietechnologien vorgestellt, die essenziellen Hürden bei deren Handhabung, Transport und Lagerung zusammenfassend dargestellt und ein umfassender Ausblick auf die Regelwerksentwicklung gegeben. Schwerpunkte liegen dabei auf I) der Entwicklung dedizierter Methoden für die Einordnung in Kategorien defekte und kritisch defekte Batteriesysteme, II) Passivierende Verfahren (thermisch und/oder elektrisch) für einen sicheren Transport und III) der Optimierung der Wertschöpfungskette des Gesamtsystems „Batterie“ durch effizientere Batteriekreisläufe und Recyclingverfahren. T2 - Zweite Fachkonferenz Transport und Lagerung von Lithiumbatterien 2025 CY - Augsburg, Germany DA - 03.07.2025 KW - Batteriesicherheit KW - Gekühlter Transport von Batterien KW - Tieftemperaturpassivierung KW - Regelwerksentwicklung KW - Wertschöpfungskette und Batterierecycling PY - 2025 AN - OPUS4-65078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - „Batterien“ Gefahrgutrechtliche Entwicklung für die Anwendung N2 - Der Markt für Energiespeicher bietet eine kontinuierlich wachsende, technologische Vielfalt. Neben etablierten Lithium-Ionen-Batterien gewinnen alternative Systeme wie Natrium-Ionen-Batterien zunehmend an Bedeutung. Jene Entwicklung steigert aktuell die Anforderungen an Regularien für Logistik und Handhabung ebendieser Systeme und bedarf einer dedizierten jedoch gleichwohl praktikablem Klassifizierung unterschiedlicher Batterien nach deren Gefährlichkeit. Genau dies ist der Schwerpunkt der vorliegenden Präsentation. Ein besonderer Fokus liegt dabei auf dem sicheren Transport kritisch defekter Batteriesysteme durch thermische Passivierung und/oder gezieltes Tiefentladen. Explizit werden aktuelle und zukünftige Batterietechnologien vorgestellt, die wesentlichen Herausforderungen bei Handhabung, Transport und Lagerung zusammengefasst und ein umfassender Ausblick auf die Weiterentwicklung der relevanten Regelwerke gegeben. T2 - 35. Münchner Gefahrgut-Tage CY - Munich, Germany DA - 26.05.2025 KW - Batteriesicherheit KW - Thermisches Durchgehen KW - Tieftemperaturpassivierung KW - Initiale Reaktionstemperatur KW - Gekühlter Transport von (kritisch) defekten Batterien PY - 2025 AN - OPUS4-65077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia T1 - High-resolution absorption isotopic spectrometry as a tool for aging studies of Li-ion batteries N2 - Lithium (Li) is the key element in the manufacturing of batteries. Isotopic study of Li may help to identify the causes of battery aging due to isotopic fractionation during charge/discharge cycles. Isotopic ratio determination is based on monitoring the isotopic components of lithium by their spin-orbit coupling and its isotopic shift of about 15 pm for the 22P←22S electronic transition around 670.788 nm. In this work, we propose improvements to our previous work [1] by using a higher-resolution double echelle modular spectrometer (HR-DEMON II) coupled to a continuum source graphite furnace atomic absorption spectrometer (HR-CS-GF-AAS) for the isotopic analysis of Li. The data analysis was carried out by using a decision-tree-based ensemble machine learning (ML) algorithm (XGBoost). A set of samples with 6Li isotope amount fractions ranging from 0.0004 to 0.99 mol mol-1 was used for the algorithm's training. Subsequently, the procedure was validated by a set of stock chemicals (Li2CO3, LiNO3, LiCl, and LiOH) and a BAM candidate reference material, a cathode material (NMC111). Finally, the ML model was applied to determine the isotope ratio of geological samples, including anorthosite, granite, soil, rhyolite, nepheline syenite, and basalt and battery samples. These samples were measured as digested without any further purification step. Improvements in the optical resolution resolve the lithium isotopic components of the atomic spectra. In the studied geological samples, were found δ7Li values between -0.5 and 4.5 ‰ with a precision range of 1 to 2 ‰. In addition, the proposed method was validated with multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS), and these results are comparable and compatible. T2 - Caltech-BAM Meeting CY - Online meeting DA - 10.08.2022 KW - Lithium isotope KW - Machine learning KW - Battery KW - High-resolution absorption isotopic spectrometry PY - 2022 AN - OPUS4-56380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Chemical characterization of aging processes in high energy-density lithium-ion batteries N2 - Introduction Lithium-ion batteries (LIBs) are one key technology to overcome the climate crisis and energy transition challenges. Demands of electric vehicles on higher capacity and power drives research on innovative cathode and anode materials. These high energy-density LIBs are operated at higher voltages, leading to increased electrolyte decay and the current collectors' degradation. Even though this fundamental corrosion process significantly affects battery performance, insufficient research is being done on the aluminum current collector. Fast and convenient analytical methods are needed for monitoring the aging processes in LIBs. Methods In this work glow-discharge optical emission spectrometry (GD-OES) was used for depth profile analysis of aged cathode material. The measurements were performed in pulsed radio frequency mode. Under soft and controlled plasma conditions, high-resolution local determination (in depth) of the elemental composition is possible. Scanning electron microscopy (SEM) combined with a focused ion beam (FIB) cutting and energy dispersive X-ray spectroscopy (EDX) was used to confirm GD-OES results and obtain additional information on elemental distribution. Results The aging of coin cells manufactured with different cathode materials (LCO, LMO, NMC111, NMC424, NMC532, NMC622, and NMC811) was studied. GD-OES depth profiling of new and aged cathode materials was performed. Quantitative analysis was possible through calibration with synthetic standards and correction by sputter rate. Different amounts of aluminum deposit on the cathode surface were found for different materials. The deposit has its origin in the corrosion of the aluminum current collector. The results are compatible with results from FIB-EDX. However, GD-OES is a faster and less laborious analytical method. Therefore, it will accelerate research on corrosion processes in high energy-density batteries. Innovative aspects - Quantitative depth profiling of cathode material -Monitoring of corrosion processes in high energy-density lithium-ion batteries - Systematic investigation of the influence of different cathode materials T2 - ANAKON 2023 CY - Vienna, Austria DA - 11.04.2023 KW - Lithium Ion Batteries KW - GD-OES KW - Depth-profiling PY - 2023 AN - OPUS4-58586 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by glow-discharge optical emission spectroscopy N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs.[1] Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - European Winter Conference on Plasma Spectrochemistry (EWCPS 2023) CY - Ljubljana, Slovenia DA - 29.01.2023 KW - Lithium-ion batteries KW - Aging mechanisms KW - Depth-profiling PY - 2023 AN - OPUS4-56992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Role of the Authority in the Approval Process of Packaging N2 - In Germany, BAM is the competent authority in the field of dangerous goods transport. The international dangerous goods transportation rules are presented and their adaptation into German law is described. BAM is responsible for dangerous goods packaging testing, manufacturer surveillance, packaging approvals and inspection of IBC and provides “Gefahrgutregeln” (GGR) to define the processes, e.g. of dangerous goods packagings approvals and surveillance.” T2 - Sino-German Workshop on Dangerous Goods Packaging CY - Online meeting DA - 18.11.2022 KW - Gefahrgutverpackungen KW - Zulassung KW - ADR PY - 2022 AN - OPUS4-56754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by GD-OES N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - Empa Group Meeting CY - Dübendorf, Switzerland DA - 22.11.2022 KW - Lithium Ion Batteries KW - GD-OES KW - FIB KW - SEM KW - EDX PY - 2022 AN - OPUS4-56584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - A Journey From Formula Student to Research at BAM N2 - In this presentation, the battery and cell test center of BAM is introduced to the Berlin Motion Lab. Points of intersection are identified, and interested students are familiarized with BAM’s research priorities in the field of batteries. The aim is to foster interaction and to inspire young researchers to engage with technologically relevant topics. T2 - Berlin Deep Tech Nexus Meetup CY - Berlin, Germany DA - 26.02.2025 KW - Battery safety KW - BAM-academy KW - Qualification programme for PhD students at BAM KW - Advanced (battery) safety topics PY - 2025 AN - OPUS4-65079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Oelze, Marcus A1 - Leonhardt, Robert A1 - Schmidt, Anita A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Vogl, Jochen A1 - Panne, Ulrich A1 - Abad Andrade, Carlos Enrique T1 - Exploring Age-Induced Lithium Isotope Fractionation in Lithium-Ion Batteries using Microwave-Induced Cold Nitrogen Plasma Mass Spectrometry N2 - This study explores Microwave-Inductively Coupled Atmospheric-pressure Plasma Mass Spectrometry (MICAP-MS) as a cost-effective alternative to Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) for analyzing lithium isotopic composition in lithium-ion batteries (LIBs). We investigate the performance of MICAP-MS in measuring Li isotope ratios in new and aged commercial lithium cobalt oxide (LCO) batteries. Our results show that MICAP-MS, operating under cold plasma conditions at 800 W with an 8 mm torch position, achieves results metrologically compatible with MC-ICP-MS, with a precision ranging from 0.6‰ to 3.4‰ for δ7Li values. MICAP-MS benefits from a dielectric resonator for uniform plasma, better ion velocity control, and higher energy efficiency. Optimal settings were identified with dwell times of 10 ms for 6Li and 1 ms for 7Li. The study of LIBs revealed that 6Li migrates towards the anode over multiple charge–discharge cycles, causing 7Li to accumulate in the cathode, a fractionation effect that becomes more pronounced with prolonged cycling. MICAP-MS provides a cost-effective, precise alternative to MC-ICP-MS, with lower operational costs and enhanced portability, advancing the study of isotopic fractionation and aging in lithium-ion batteries. KW - MICAP-MS KW - Lithium KW - Battery aging KW - Lithium isotopes KW - Nitrogen plasma KW - Isotope fractionation KW - lithium cobalt oxide KW - LCO PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643777 DO - https://doi.org/10.1039/d4ja00324a SN - 0267-9477 SP - 1 EP - 11 PB - Royal Society of Chemistry (RSC) AN - OPUS4-64377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Forschung der BAM zu Lithiumbatterien: Schwerpunkt Anwendungsebene N2 - Für den Transport von Lithiumbatterien als Gefahrgut sind Kenntnisse über deren Verhalten und möglichen Schutz in Form von Verpackungen essentiell. Die aktuellen Forschungsergebnisse der BAM der letzten 2 Jahre werden dem Fachpublikum vorgestellt. T2 - BAM Erfa Verpackungen CY - Berlin, Germany DA - 17.09.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Gefahrverpackungen PY - 2024 AN - OPUS4-62332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Anita T1 - Irrungen, Wirrungen und Lichtblicke - Überarbeitung des Gefahrguttransportrechts für Lithium- und Natrium-Ionen-Batterien N2 - Die Überarbeitung des Gefahrgutrechts hinsichtlich der Einstufung von Lithium- und Natrium - Ionen Batterien nach Gefährlichkeit trägt so einige Stilblüten - wie zuletzt den Vorschlag von 135 neuen UN Nummern für Lithiumbatterien. Die BAM trägt mit ihrer Kompetenz aus eigenen Untersuchungen und Forschung dazu bei, dass die deutsche Delegation bei den Vereinten Nationen, wo die Regelwerke weiterentwickelt werden, gezielte Vorschläge einbringen kann. Der Artikel beschreibt die aktuellen Entwicklungen. KW - Lithiumbatterien KW - Gefahrguttransport KW - Regelwerksentwicklung PY - 2024 VL - 2024 IS - 6 SP - 29 EP - 32 PB - Verkehrs-Verlag J. Fischer GmbH & Co. KG CY - Düsseldorf AN - OPUS4-62334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Nominal and Off-Nominal Battery / High Energy Storage Testing Off-Nominal cell and battery testing at BAM N2 - The abuse testing of electrochemical energy storage systems poses a major safety challenge. Thanks to its core competence in ensuring safety in technology and chemistry, BAM has the capabilities to carry out safety tests from small to large scale. Tests up to approx. 200Wh (lithium-ion batteries) can be carried out in the cell test center and abuse tests up to 20kWh are possible in the open field test on the TTS. T2 - Europe Energy Storage Safety Summit CY - Petten, Netherlands DA - 08.10.2024 KW - Battery Safety KW - Abuse testing KW - Lithium-ion batteries KW - Safety critical tests PY - 2024 AN - OPUS4-62321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neues Klassifizierungssystem für Lithiumbatterien N2 - Um Lithiumbatterien sicherer aber gleichzeitig auch dem Gefährdungszustand angemessener und damit wirtschaftlich effizienter transportieren zu können, wird aktuell bei UN ein Klassifizierungssystem nach Gefährlichkeit ausgearbeitet. Als eine der intensiv mitarbeitenden zuständigen Behörden weltweit hat die BAM zahlreiche Untersuchungen selbst durchgeführt und arbeitet an Lösungsansätzen mit. T2 - Gefahrguttag des BMDV im Rahmen der IAA CY - Hannover, Germany DA - 19.09.2024 KW - Lithiumbatterien KW - Klassifizierung KW - Gefahrguttransport KW - Gefährlichkeit PY - 2024 AN - OPUS4-62326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Linking material and electrode properties to the cell performance of commercially available sodium-ion cells N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regard to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells.[1,2] Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Batterieforum Deutschland 2026 CY - Berlin, Germany DA - 20.01.2026 KW - Electrochemical Energy Storage KW - Battery KW - Sodium-ion-battery KW - EES KW - Energy Storage PY - 2026 AN - OPUS4-65588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Umfassende Analyse von Leachabels aus rezyklierten HDPE-Kanistern N2 - Es wurde untersucht, welche Substanzen aus rHDPE-Post-Consumer-Rezyklat herausgelöst und nachgewiesen werden können (Non-Target-Analytik). Die Substanzen wurden sowohl chemisch als auch anwendungsbezogen systematisiert. Diskutiert wurde die Nutzung der Ergebnisse zur Festlegung von Qualitätskriterien von rHDPE sowie zur Verbesserung des mechanischen Recycling-Prozesses. T2 - 20. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 13.11.2025 KW - rHDPE KW - Rezyklat KW - Leachables PY - 2025 AN - OPUS4-64852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. T1 - Simulationsdaten zur photooxidativen Beanspruchung an verschiedenen geografischen Freibewitterungs-Standorten N2 - Freibewitterungen weisen grundsätzlich eine hohe Variabilität der jeweiligen Intensität der Beanspruchungsparameter auf; sie sind nicht einfach wiederholbar. Um dennoch die Ergebnisse einer Beanspruchung vergleichen zu können, ist eine aussagekräftige Charakterisierung der Freibewitterung wichtig. Traditionell werden Daten bekannter Einflussgrößen wie Globalstrahlung, Temperatur oder Feuchtewerte herangezogen. Obwohl man weiß, dass diese Größen an den exponierten Oberflächen wechselwirken und kombiniert als Mikroklima Einfluss auf Degradationsprozesse nehmen, werden schon aus Praktikabilitätsgründen diese separat als klimatische Messgrößen angegeben. Die Aussagekraft dieser Daten ist mäßig. Ziel dieses Beitrags ist es, die Aussagekraft und damit Vergleichbarkeit zu erhöhen, indem diese Messdaten als Stundendaten zu Wirkintegralen vorverarbeitet und jahresweise akkumuliert werden. Betrachtet wird dafür der Prozess der Photooxidation, da dieser Alterungs-mechanismus bei allen Kunststoffen auftritt. Für eine einfache Modellierung wird die wirksame UV-Bestrahlung, gewichtet mit einer Arrhenius-abhängigen Ober¬flächen-temperatur (TOF), über den Beanspruchungszeitraum von hier je einem Jahr akkumuliert. Die Idee einer solchen Messgröße für photooxidative Ober¬flächen¬alterung wurde bereits vorgestellt [1]. Dort wurde ein Gerät vor¬geschlagen, mit dem dieser Wert für verschieden absorbierende Oberflächen für die Dauer einer Exposition akkumuliert wird, und ergänzend eine Abschätzung der Betauungs¬zeiten dieser Referenz-Oberflächen erfolgen könnte. Hier soll es um eine rechnerisch generierte Zusammenstellung dieser photo¬oxidativen 1-Jahres-Alterungswerte für verschiedene Standorte gehen. Ein Temperaturfaktor erfasst dabei den Einfluss der Strahlungserwärmung auf eine weiße, graue bzw. schwarze Referenzoberflächen, spiegelt also die Kopplung von solarer Strahlung und Temperatur wider [1]. Ermittelt wird er aus Stunden¬daten der Globalstrahlung und der Lufttemperatur. Die spektrale Wirkung wird aus Sonnenhöhenständen entsprechend der geografischen Breite mit Hilfe der FastRT-Oberfläche [2] als PiT·h-Wert abgeschätzt [3]. Anhand der errechneten Jahreswerte können die Schweregrade der photo¬oxidativen Beanspruchung an den verschiedenen Standorten unmittelbar verglichen werden. Die gezeigten Simulationsdaten für ein solches „elektronisches Referenzmaterial“ für photooxidative Degradation zeigen die prinzipielle Möglichkeit einer Kartografierung solcher Daten auf. T2 - 53. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 26.03.2025 KW - Polymer 3R, UV, Bestrahlung, Bewitterung PY - 2025 SN - 978-3-9826129-2-8 VL - 53 SP - 19 EP - 28 PB - Gesellschaft für Umweltsimulation e.V. CY - 76327 Pfinztal (Berghausen) AN - OPUS4-62902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Trubiroha, Peter A1 - Wachtendorf, Volker T1 - Significance of new data pairs for irradiance and (surface) temperature N2 - There is consent that UV irradiance and temperature at the place of photodegradation are the most important environmental parameters in weathering, along with humidity. This contribution shows how an improvement in the measurement data situation can improve the significance and comparability of outdoor exposures. Photooxidative ageing is calculated using sample polymers for which the corresponding modelling data (Exposure Response Functions, ERF) is available. The mean square deviations are estimated, which result from using different spectral irradiances and different spectral sensitivities, both of the sensors and the polymers. It will be shown here how the significance of the irradiance values increases with increasing approximation of the spectral sensitivities of the sensor and polymer. Also, the mean square deviations are estimated, which result from using different activation energies and surface temperatures. A selection of different variables to describe the weathering exposure is created. The potential of either individual values or data pairs is evaluated in terms of significance or correlation to the calculated photooxidative ageing. Recording hourly data also enables subsequent evaluations of individual test specimens, adapted to the respective colour or to determine activation energies. An accumulated value, calculated from PIT-radiometer irradiance and a suited surface temperature, can provide a comparison of different outdoor exposures over different locations or years. Thus, a characterisation of the weathering exposure would be related to a reference spectral sensitivity (much closer to a polymer than that of a common UV radiometer), one reference activation energy, and different surface temperature scenarios with, on the one hand, graded solar absorptions (white / grey / black) and, on the other hand, different thermal couplings (coated metal / thick plastic). This results in three values each for plastic samples and coated metals (light / grey / dark). It will never be possible to accurately predict the weathering tests for individual samples (with their specific sensitivities), but the proposed approaches can go a long way towards the comparability of outdoor weathering exposures. T2 - 10th European Weathering Symposium EWS CY - Graz, Austria DA - 11.09.2024 KW - Polymer 3R KW - Outdoor weathering PY - 2024 SN - 978-3-9826129-1-1 SP - 121 EP - 133 PB - Stober Medien GmbH CY - Eggenstein AN - OPUS4-61291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Significance of new data pairs for irradiance and (surface) temperature N2 - There is consent that UV irradiance and temperature at the place of photodegradation are the most important environmental parameters in weathering, along with humidity. This contribution shows how an improvement in the measurement data situation can improve the significance and comparability of outdoor exposures. Photooxidative ageing is calculated using sample polymers for which the corresponding modelling data (Exposure Response Functions, ERF) is available. The mean square deviations are estimated, which result from using different spectral irradiances and different spectral sensitivities, both of the sensors and the polymers. It will be shown here how the significance of the irradiance values increases with increasing approximation of the spectral sensitivities of the sensor and polymer. Also, the mean square deviations are estimated, which result from using different activation energies and surface temperatures. A selection of different variables to describe the weathering exposure is created. The potential of either individual values or data pairs is evaluated in terms of significance or correlation to the calculated photooxidative ageing. Recording hourly data also enables subsequent evaluations of individual test specimens, adapted to the respective colour or to determine activation energies. An accumulated value, calculated from PIT-radiometer irradiance and a suited surface temperature, can provide a comparison of different outdoor exposures over different locations or years. Thus, a characterisation of the weathering exposure would be related to a reference spectral sensitivity (much closer to a polymer than that of a common UV radiometer), one reference activation energy, and different surface temperature scenarios with, on the one hand, graded solar absorptions (white / grey / black) and, on the other hand, different thermal couplings (coated metal / thick plastic). This results in three values each for plastic samples and coated metals (light / grey / dark). It will never be possible to accurately predict the weathering tests for individual samples (with their specific sensitivities), but the proposed approaches can go a long way towards the comparability of outdoor weathering exposures. T2 - 10th European Weathering Symposium EWS CY - Graz, Austria DA - 11.09.2024 KW - Polymer 3R KW - Outdoor weathering PY - 2024 AN - OPUS4-61292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Engelhard, Carsten T1 - Advances in Analytical Chemistry and Mass Spectrometry to Support a Sustainable and Circular Economy N2 - Recent advances in analytical chemistry have significantly supported efforts to realize a sustainable circular economy and circular chemistry. By enabling rapid materials analysis and characterization of materials transformation throughout their life cycle, analytical methods are playing a key role in supporting waste reduction, resource recovery, pollution monitoring, and sustainable manufacturing. In this presentation, recent developments in analytical chemistry and analytical instrumentation to support a sustainable and circular economy will be reviewed and selected contributions from our laboratories will be discussed. For example, high-resolution mass spectrometry combined with chromatography is an indispensable tool for the identification and characterization of plastics. To support the transition from linear to circular chemistry, whichs prioritizes reuse, recycling, and resource efficiency, accurate and detailed chemical information about plastic materials is essential. Here, targeted and non-targeted screening approaches help to characterize, for example, the quality and safety of recycled plastics. In addition, green analytical chemistry has emerged as a topic of interest, emphasizing the use of solvent-free and low-energy methods to minimized environmental impact during analysis. Here, ambient desorption/ionization high-resoluton mass spectrometry (ADI-MS) is considered a very attractive tool because it dos not require chromatography or large amounts of solvent, reduces sample preparation time, and produces virtually no chemical waste. Here, a solvent-free, plasma-based ADI-MS method is presented, which was carefuly developed for the direct identification and fast screening of per- and polyfluoroalkyl substances (PFAS). PFAS are a large class of thousands of synthetic chemicals that are used worldwide. However, growing environmental and human health concerns in the last two decades have led to more stringent regulatory requirements and the development of quantitative analytical methods for PFAS detection. Today, standardized and powerful methods exist, e.g., for the determination PFAS in water, sludge, compost, soil, and drinking water. While liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is often used, sample preparation, solvent consumption, and total analysis times can be challenging. Here, ADI-MS is considered interesting, because it requires only minimal sample preparation and little solvent consumption. In this work, a plasma-based pin-to-capillary flowing atmospheric-pressure afterglow source (FAPA) is used for the direct desorption/ionization of PFAS from thin-layer chromatography (TLC) plates. Selected PFAS samples were directly probed on functionalized TLC surfaces without a preceding planar chromatography step. In addition, direct analysis of PFAS mixtures and selected matrices was performed with little solvent consumption, no sample preparation and short analysis time. T2 - XXII European Conference on Analytical Chemistry (EUROANALYSIS) CY - Barcelona, Spain DA - 31.08.2025 KW - Mass Spectrometry KW - Extractables & Leachables KW - Non-Targeted Analysis KW - PFAS KW - FAPA-MS PY - 2025 AN - OPUS4-65275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Giehl, A. A1 - Schönlein, A. A1 - Feil, F. T1 - Normenvorschlag zur Bewitterung transparenter oder transluzenter Kunststoffe N2 - Aufgrund des tieferen Eindringens der solaren Strahlung treten bei transparenten und bei transluzenten (durchscheinenden) Kunststoffen veränderte Bedingungen gegenüber opaken Proben auf. Dies kann zu speziellen Effekten und damit zu einem abweichenden Bewitterungsverhalten führen. Auch aus Mangel an geeigneten Normen werden diese Effekte häufig vernachlässigt. Deshalb initiiert der DIN-FNK auf ISO-Ebene ein entsprechendes Dokument. Die Norm ist in der Form eines Technical Reports geplant. In einem ersten Teil sollen die Besonderheiten transparenter oder transluzenter Kunststoffe erläutert werden, um den Nutzer für mögliche Probleme zu sensibilisieren. Im zweiten Teil werden Empfehlungen für Bestrahlung oder Bewitterung herausgearbeitet. In einem dritten Teil geht es dann um Besonderheiten bei der Messung von Eigenschaftsänderungen transparenter bzw. transluzenter Kunststoffe. In informativen Anhängen sollen verschiedene Beispiele die Thematik illustrieren. T2 - 51. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 29.03.2023 KW - Bewitterung KW - Polymer 3R KW - Bestrahlung KW - UV PY - 2023 SN - 978-3-9818507-8-9 SP - 39 EP - 46 PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal (Berghausen) AN - OPUS4-57271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Simulationsdaten zur photooxidativen Beanspruchung an verschiedenen geografischen Freibewitterungs-Standorten N2 - Freibewitterungen weisen grundsätzlich eine hohe Variabilität der jeweiligen Intensität der Beanspruchungsparameter auf; sie sind nicht einfach wiederholbar. Um dennoch die Ergebnisse einer Beanspruchung vergleichen zu können, ist eine aussagekräftige Charakterisierung der Freibewitterung wichtig. Traditionell werden Daten bekannter Einflussgrößen wie Globalstrahlung, Temperatur oder Feuchtewerte herangezogen. Obwohl man weiß, dass diese Größen an den exponierten Oberflächen wechselwirken und kombiniert als Mikroklima Einfluss auf Degradationsprozesse nehmen, werden schon aus Praktikabilitätsgründen diese separat als klimatische Messgrößen angegeben. Die Aussagekraft dieser Daten ist mäßig. Ziel dieses Beitrags ist es, die Aussagekraft und damit Vergleichbarkeit zu erhöhen, indem diese Messdaten als Stundendaten zu Wirkintegralen vorverarbeitet und jahresweise akkumuliert werden. Betrachtet wird dafür der Prozess der Photooxidation, da dieser Alterungs-mechanismus bei allen Kunststoffen auftritt. Für eine einfache Modellierung wird die wirksame UV-Bestrahlung, gewichtet mit einer Arrhenius-abhängigen Ober¬flächen-temperatur (TOF), über den Beanspruchungszeitraum von hier je einem Jahr akkumuliert. Die Idee einer solchen Messgröße für photooxidative Ober¬flächen¬alterung wurde bereits vorgestellt [1]. Dort wurde ein Gerät vor¬geschlagen, mit dem dieser Wert für verschieden absorbierende Oberflächen für die Dauer einer Exposition akkumuliert wird, und ergänzend eine Abschätzung der Betauungs¬zeiten dieser Referenz-Oberflächen erfolgen könnte. Hier soll es um eine rechnerisch generierte Zusammenstellung dieser photo¬oxidativen 1-Jahres-Alterungswerte für verschiedene Standorte gehen. Ein Temperaturfaktor erfasst dabei den Einfluss der Strahlungserwärmung auf eine weiße, graue bzw. schwarze Referenzoberflächen, spiegelt also die Kopplung von solarer Strahlung und Temperatur wider [1]. Ermittelt wird er aus Stunden¬daten der Globalstrahlung und der Lufttemperatur. Die spektrale Wirkung wird aus Sonnenhöhenständen entsprechend der geografischen Breite mit Hilfe der FastRT-Oberfläche [2] als PiT·h-Wert abgeschätzt [3]. Anhand der errechneten Jahreswerte können die Schweregrade der photo¬oxidativen Beanspruchung an den verschiedenen Standorten unmittelbar verglichen werden. Die gezeigten Simulationsdaten für ein solches „elektronisches Referenzmaterial“ für photooxidative Degradation zeigen die prinzipielle Möglichkeit einer Kartografierung solcher Daten auf. T2 - 53. Jahrestagung der GUS CY - Stutensee, Germany DA - 26.3.2025 KW - Polymer 3R KW - UV KW - Bestrahlung KW - Bewitterung PY - 2025 AN - OPUS4-62903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Digitale Umweltsimulation am Beispiel der Photooxidation von Polymeren N2 - Die Umweltwirkungen auf ein Material werden als Überlapp der Funktionskurven von Materialempfindlichkeit und einwirkenden Umweltparametern betrachtet. Wenn entweder die Empfindlichkeit oder die Beanspruchungen Null sind, ergibt sich auch keine Umweltwirkung und bei beidseitig Werten größer Null das jeweilige Produkt der beiden. Die Akkumulation der nicht-reversiblen Effekte über die Zeit und allen Eigenschaftsänderungen entspricht der Alterung des Materials für den jeweiligen Expositionszeitraum. Die digitale Umweltsimulation gliedert sich hier in drei Teilaspekte. Ein erster, rein materialwissenschaftlicher Teil hat die Aufgabe, alle relevanten Materialempfindlichkeiten experimentell zu quantifizieren. Ein zweiter – unter Umständen numerischer Teil – hat die Aufgabe, das Bauteil und seine Einbaulage zu digitalisieren und aus den makroskopischen Umgebungsbedingungen die relevanten mikroklimatischen Umweltparameter für alle Oberflächen- oder Volumenelemente zu bestimmen. In einem dritten Teil werden die Einwirkungen über den betrachteten Zeitraum berechnet und kumuliert. Dieses Konzept, das auf den so genannten Expositions-Reaktions-Funktionen (ERF) basiert, wird an Beispielen der Photoxidation erläutert. Dieses Vorgehen wurde schon beim ViPQuali-Projekt als Numerische Umweltsimulation umgesetzt. Überprüft werden muss das Modell unbedingt an einer realitätsnahen Validierungsbeanspruchung. Hier werden die ermittelten ERFs mit über den kompletten Beanspruchungszeitraum geloggten Umweltparametern gekoppelt, um die berechnete mit der experimentell erfahrenen Alterungswirkung zu vergleichen. Nur so kann sichergestellt sein, dass alle für die Anwendungsumgebung relevanten Materialempfindlichkeiten einbezogen wurden. T2 - 52. Jahrestagung der GUS CY - Blankenloch, Germany DA - 26.03.2024 KW - Polymer 3R KW - UV KW - Bestrahlung KW - Bewitterung PY - 2024 AN - OPUS4-59831 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Gedanken, Tipps & Tricks zu künstlichen Bewitterungsprüfungen N2 - Die Fragestellung kann nur exemplarisch dargestellt werden, aber ist hoffentlich auch für langjährige Praktiker in den ausgewählten Punkten interessant. Es sollen für folgende Bereiche Beispiele gegeben werden: Probenvorbereitung, Testvorbereitung, Testdurchführung und Auswertung. T2 - 53. Jahrestagung der GUS 2025; Umwelteinflüsse erfassen, simulieren, bewerten. CY - Stutensee, Germany DA - 26.03.2025 KW - Künstliche Bewitterung KW - Umweltsimulation KW - Wechseltemperaturen KW - Prüfung KW - UV KW - Feuchte KW - Beregnung PY - 2025 AN - OPUS4-62862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Combined impact of UV radiation and nitric acid (HNO3) on HDPE jerrycans – comparison of outdoor and lab test N2 - A damaging action of HNO3-55% only occurs in combination with its decomposition into nitrous gases, which can be caused by UV radiation. In a laboratory test, transparent HDPE jerrycans have been exposed to both UV radiation and 55 wt-% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The respective damages are compared with FTIR spectroscopy in ATR and HT-gel permeation chromatography (GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. The gradual increase in oxidative damage shows the good reproducibility of the lab exposure. The decomposition of nitric acid into nitrous gases by UV radiation – as well as the jerrycan oxidation – is also observed at lower HNO3 concentration (28 wt- %). Similar results are obtained after outdoor tests. Again, the damage occurs only after combined exposure, in contrast to the exposures to UV only and to HNO3 only, which were conducted in parallel. Outdoor exposures are most readily accepted as they represent possible end-use conditions. However, the reproducibility of these exposures is poor due to the large temporal variations in weather. There are also several safety risks, which is why the number of replicates remains limited. Since the outdoor and lab exposure tests show the same qualitative results, it is appropriate to conduct systematic studies in the laboratory. After 6 days of lab exposure, the oxidation damage is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. It should be noted that this amount can also occur in two sunny weeks. T2 - 24th iapri World Packaging Conference CY - Valencia, Spain DA - 17.06.2024 KW - UV exposure KW - Nitric acid KW - Polyethylene KW - Oxidation PY - 2024 AN - OPUS4-60416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - PE-Rezyklat Einsatz in Gefahrgutbehältern? N2 - In diesem Vortrag geht es darum zu beschreiben, ob Rezyklat für PE Behälter gefüllt mit Gefahrgut Anwendung finden darf. Kanister aus Neuware und Rezyklat wurden verschiedenen Untersuchungen unterzogen. Es wurde der Feststoff und Leachable getestet. Methoden sind TED-GC/MS und GC-HRMS. Proben der Leachable wurden nach 1 und 4 Wochen genommen und die Peakanzahl vergleichen dargestellt. Als Lösemittel wurden Wasser, Ethanol, EtOAc, Ammoniak und HNO3 verwendet. T2 - Fachaustausch Projekt GeSKAR CY - Dessau, Germany DA - 10.01.2025 KW - Gefahrgutbehälter KW - Rezyklat PY - 2025 AN - OPUS4-62396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Wägner, Yannick A1 - Geburtig, Anja T1 - Gedanken, Tipps & Tricks zu künstlichen Bewitterungsprüfungen N2 - Die Fragestellung kann nur exemplarisch dargestellt werden, aber ist hoffentlich auch für langjährige Praktiker in den ausgewählten Punkten interessant. Es sollen für folgende Bereiche Beispiele gegeben werden: Probenvorbereitung, Testvorbereitung, Testdurchführung und Auswertung. T2 - 53. Jahrestagung der GUS 2025 CY - Stutensee-Blankenloch bei Karlsruhe, Germany DA - 26.03.2025 KW - Wechseltemperaturen KW - Künstliche Bewitterung KW - Prüfung KW - UV KW - Feuchte KW - Beregnung PY - 2025 SN - 978-3-9826129-2-8 VL - 53 SP - 253 EP - 257 PB - Gesellschaft für Umweltsimulation e.V. CY - 76327 Pfinztal (Berghausen) AN - OPUS4-62861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bandow, N. A1 - Aitken, M. D. A1 - Geburtig, Anja A1 - Kalbe, Ute A1 - Piechotta, Christian A1 - Schoknecht, Ute A1 - Simon, Franz-Georg A1 - Stephan, Ina T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives? N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented. KW - Environmental simulations KW - Polymer-based products KW - Artificial weathering KW - Degradation KW - Leaching KW - Soil contact PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310 DO - https://doi.org/10.3390/ma13122709 SN - 1996-1944 VL - 13 IS - 12 SP - Paper 2709, 22 PB - MDPI CY - Basel, Switzerland AN - OPUS4-50931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Gorbushina, Anna A1 - Plarre, Rüdiger A1 - Stephan, Ina T1 - Umweltsimulation an der BAM – Grundlegende Ansätze mit Beispielen aus der natürlichen Umwelt N2 - Drei grundlegend verschiedene Ansätze für Umweltsimulation werden an Beispielen illustriert: (i) Ganzheitlicher Ansatz - Nachstellen von Umweltmilieus im Labor Ziel ist hier das Nachstellen von (kombinierten) Umweltbedingungen im Labor; die Umweltparameter werden mit all ihren Wechselwirkungen aufgebracht. Hauptnutzen ist eine gegenüber der natürlichen Beanspruchung erhöhte Reproduzierbarkeit der Umweltbedingungen. Hat man sein Laborsetup entwickelt, ist es auf verschiedene Materialien anwendbar. Unter solchen Laborbedingungen ermittelte Lebensdauern sind dabei nicht auf die typischerweise sehr variablen Real-Umweltbedingungen übertragbar. (ii) Parametrisierter Ansatz - Ermittlung einzelner Materialempfindlichkeiten Hierbei werden im Labor die Wirkungen separater Umweltparameter auf Materialien nachgestellt. Für eine solche Separation der Einflussfaktoren ist insbesondere die Aufschlüsselung möglicher Wechselwirkungen der Umwelt-parameter (z.B. Mikroklima an bestrahlten Oberflächen) erforderlich. Einzelne (meist Alterungs-) Empfindlichkeiten können qualitativ nachgewiesen werden oder sogar – als Beanspruchungs-Wirkungs-Funktionen – quantifiziert werden, was einen wesentlichen Schritt in Richtung der Digitalisierung der Material¬prüfung darstellt. Insbesondere ist dann auch eine Lebensdauer-vorhersage für vorgegebene Zeitreihen der Beanspruchungs¬parameter umsetzbar. (iii) Rückwirkungen auf die Umwelt Umweltbeanspruchungen können zur Freisetzung von Schadstoffen in die Umwelt führen. Durch die Nachstellung kritischer, aber realitätsnaher Einsatzszenarien kann die Menge an freigesetzten Substanzen abgeschätzt werden. Egal, welcher Ansatz verfolgt wird – ein Vergleich mit der oder einer Real-beanspruchung ist unerlässlich, ebenso wie die Messdatenaufzeichnung (data logging) aller potenziell relevanten Beanspruchungsparameter während dieser Realbeanspruchung. Obwohl die naturnahe Umwelt – sowohl in der BAM als auch bei der GUS – gegenüber der technischen Umwelt eher untergeordnet auftritt, werden zur Illustration Beispiele aus der naturnahen Umwelt verwendet. T2 - 50. Jahrestagung der GUS CY - Online meeting DA - 23.03.2022 KW - Umweltsimulation PY - 2022 SN - 978-3-9818507-7-2 SP - 79 EP - 89 AN - OPUS4-55015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Digitale Umweltsimulation am Beispiel der Photooxidation von Polymeren N2 - Die Umweltwirkungen auf ein Material werden als Überlapp der Funktionskurven von Materialempfindlichkeit und einwirkenden Umweltparametern betrachtet. Wenn entweder die Empfindlichkeit oder die Beanspruchungen Null sind, ergibt sich auch keine Umweltwirkung und bei beidseitig Werten größer Null das jeweilige Produkt der beiden. Die Akkumulation der nicht-reversiblen Effekte über die Zeit und allen Eigenschaftsänderungen entspricht der Alterung des Materials für den jeweiligen Expositionszeitraum. Die digitale Umweltsimulation gliedert sich hier in drei Teilaspekte. Ein erster, rein materialwissenschaftlicher Teil hat die Aufgabe, alle relevanten Materialempfindlichkeiten experimentell zu quantifizieren. Ein zweiter – unter Umständen numerischer Teil – hat die Aufgabe, das Bauteil und seine Einbaulage zu digitalisieren und aus den makroskopischen Umgebungsbedingungen die relevanten mikroklimatischen Umweltparameter für alle Oberflächen- oder Volumenelemente zu bestimmen. In einem dritten Teil werden die Einwirkungen über den betrachteten Zeitraum berechnet und kumuliert. Dieses Konzept, das auf den so genannten Expositions-Reaktions-Funktionen (ERF) basiert, wird an Beispielen der Photoxidation erläutert. Dieses Vorgehen wurde schon beim ViPQuali-Projekt als Numerische Umweltsimulation umgesetzt. Überprüft werden muss das Modell unbedingt an einer realitätsnahen Validierungsbeanspruchung. Hier werden die ermittelten ERFs mit über den kompletten Beanspruchungszeitraum geloggten Umweltparametern gekoppelt, um die berechnete mit der experimentell erfahrenen Alterungswirkung zu vergleichen. Nur so kann sichergestellt sein, dass alle für die Anwendungsumgebung relevanten Materialempfindlichkeiten einbezogen wurden. T2 - 52. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 26.03.2024 KW - UV KW - Polymer 3R KW - Bewitterung KW - Bestrahlung PY - 2024 SN - 978-3-9826129-0-4 SP - 31 EP - 40 PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal (Berghausen) AN - OPUS4-59830 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meurer, Maren T1 - Is olypropylene relevant for microplastic analytics? N2 - Nowadays, in every terrestrial and aquatic ecosystem, even in the remotest areas, small residues of plastics, the so called microplastic (MP) can be found. MPs are particles with a size of 1-1000 µm (ISO/TR 21960:2020), mainly containing synthetic polymers like polyethylene (PE), polypropylene (PP), polystyrene (PS) or polyethylene terephthalate (PET). Even styrene-butadiene rubber (SBR) as an indication for tire wear is included due to similar particle formation. To understand the MPs consequences to the environment, it is of high priority to capture its extent of contamination. It is surprising that in the analysis of polymer masses in environmental samples, PE, PS and SBR are often detected, but only small amounts of PP, although this is the second most commonly produced standard plastic and many MP particles originate from carelessly disposed packaging materials. This presentation provides hypotheses about the reasons of rare PP identification and mass quantification in environmental samples. Different investigations of pristine PP and representative environmental samples, including the pre-treatment by Accelerated Solvent Extraction (ASE) or with density separation followed by the thermal extraction / desorption gas chromatography-mass spectrometry (TED-GC/MS) are presented. The results are discussed according to the material properties and a possible degradation mechanism under different weathering conditions which indicate less stability under relevant storage conditions. T2 - Society of Environmental Toxicology and Chemistry CY - Dublin, Ireland DA - 30.04.2023 KW - Sample preparation KW - Polypropylene KW - Microplastic KW - Degradation PY - 2023 AN - OPUS4-57474 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid (HNO3) on HDPE jerrycans – comparison of outdoor and lab test N2 - A damaging action of HNO3-55% only occurs in combination with its decomposition into nitrous gases, which can be caused by UV radiation. In a laboratory test, transparent HDPE jerrycans have been exposed to both UV radiation and 55 wt-% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The respective damages are compared with FTIR spectroscopy in ATR and HT-gel permeation chromatography (GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. The gradual increase in oxidative damage shows the good reproducibility of the lab exposure. The decomposition of nitric acid into nitrous gases by UV radiation – as well as the jerrycan oxidation – is also observed at lower HNO3 concentration (28 wt- %). Similar results are obtained after outdoor tests. Again, the damage occurs only after combined exposure, in contrast to the exposures to UV only and to HNO3 only, which were conducted in parallel. Outdoor exposures are most readily accepted as they represent possible end-use conditions. However, the reproducibility of these exposures is poor due to the large temporal variations in weather. There are also several safety risks, which is why the number of replicates remains limited. Since the outdoor and lab exposure tests show the same qualitative results, it is appropriate to conduct systematic studies in the laboratory. After 6 days of lab exposure, the oxidation damage is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. It should be noted that this amount can also occur in two sunny weeks. T2 - 24th iapri World Packaging Conference CY - Valencia, Spain DA - 17.06.2024 KW - Ppolyethylene KW - UV exposure KW - Nitric acid KW - Oxidation PY - 2024 VL - 2 SP - 30 EP - 37 PB - ITENE AN - OPUS4-60414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scholl, Juliane A1 - Scharpmann, Philippa A1 - Bagheri, Abbas A1 - Lisec, Jan A1 - Meiers, Emelie A1 - Jaeger, Carsten A1 - Leonhardt, Robert A1 - Haase, Hajo A1 - Koch, Matthias T1 - Beyond the lab: Real-world composition of commercial Li-ion battery electrolytes N2 - This study presents a systematic, characterization of electrolytes from commercial lithium-ion batteries (LIB), encompassing 90 batteries from leading global manufacturers across diverse formats and application sectors. An integrated, complementary mass spectrometric workflow combining LC–MS/MS, GC–MS, and high-resolution MS was employed. To ensure robust structural annotation, molecular identifications were assigned confidence levels following Schymanski et al. (2014). Across all formats, PF6− was confirmed as the dominant Li+ counterion, frequently coexisting with BF4−, PO2F2−, and bis(fluorosulfonyl)imide (FSI−), forming binary and ternary salt systems optimized for both conductivity and safety. Solvent systems revealed the widespread use of propylene carbonate (PC) combined with diverse carbonate mixtures, demonstrating trends in performance optimization specific to cell format. A variety of additives were identified, reflecting a clear shift towards multifunctional, synergistic additive packages and the gradual replacement of fluorinated species with environmentally safer alternatives. Cycling studies demonstrated that electrolyte degradation mechanisms are strongly influenced by electrode composition and additive chemistry, with oxidative degradation pathways dominating. Together, these findings provide rare empirical insight into the evolving formulation strategies of electrolytes in commercial LIB, still employing classic carbonates and LiPF6, but highlighting a trend toward safer, more robust, and sustainable electrolyte architectures by using synergistic multifunctional systems. KW - Mass Spectrometry KW - Lithium-ion batteries KW - Electrolyte degradation PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656254 DO - https://doi.org/10.1016/j.jpowsour.2026.239739 SN - 0378-7753 VL - 673 SP - 1 EP - 13 PB - Elsevier B.V. AN - OPUS4-65625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Kick-off LiBaTra - WP4: Safety Tests N2 - Die BAM ist Projektpartner im vom BMWE geförderten Verbundvorhaben LiBaTra („Lithium-Ionen-Batterie Transport und sichere Deaktivierung für das Recycling“). Weitere Projektpartner neben der BAM sind die Universität Braunschweig mit dem iPAT (Institut für Partikeltechnik) sowie die Firmen Siemens Energy SE sowie No Canary. Die BAM bearbeitet das Teilvorhaben „Risikobestimmung tiefenentladener Energiespeicher“ (FKZ: 03EI6145A-D). Die Präsentation gibt die wesentlichen Arbeitsinhalte des Teilvorhabens der BAM wieder. T2 - Kick-off Meeting des Verbundvorhabens LiBaTra CY - Online meeting DA - 17.02.2026 KW - Auswirkungsbetrachtungen KW - Elektrische Energiespeicher KW - Lithium-Ionen-Batterie KW - Stationäre Energiespeicher KW - Thermisches Durchgehen PY - 2026 AN - OPUS4-65657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid on high‐density polyethylene containers as a laboratory test N2 - In a laboratory test, transparent high‐density polyethylene (HDPE) jerrycans have been exposed to both UV radiation and 55 wt‐% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The damages are compared with FTIR spectroscopy in ATR and HT‐gel permeation chromatography(GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. This is caused by the decomposition of nitric acid into nitrous gases by UV radiation, which is also observed at lower concentrations (28 wt‐%). After 6 days of laboratory exposure, this is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. The gradual increase in oxidative damage shows the reproducibility of the test. KW - Molecular mass distribution KW - High-density polyethylene KW - Nitric acid KW - UV radiation PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550141 DO - https://doi.org/10.1002/pts.2673 SN - 0894-3214 VL - 35 IS - 10 SP - 729 EP - 735 PB - Wiley CY - New York, NY AN - OPUS4-55014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaeger, Carsten T1 - Untargeted Analysis of Leachables Released from Recycled Polyethylene Canisters N2 - Recycling existing materials and products as far as possible is an integral part of the circular economy. Plastic-based packaging, including containers for food and beverages but also for storing and transporting chemicals and dangerous goods, are presently made to a wide range from fossil resources. However, even for these “contact sensitive” products, there is still the aim of sustainability using recycled materials. For packings for the transport of dangerous goods, safety characteristics of the containments made from the “virgin” materials including polyethylene (PE) are well known and tested within the frame of their design type approval. Much less, however, is known about their counterparts made from recycled materials. Apart from material weaking, incorporation of residues into recycled plastics can cause contamination of the goods inside the packaging. To fill this gap, we have evaluated high-density PE (HDPE) canisters made from post-consumer waste towards release of plastic additives and contaminants such as residues from former contents. Using a comprehensive untargeted high-resolution mass spectrometry (HRMS) approach as well as thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC/MS), we detected up to 870 distinct components depending on the type of stored chemical and storage duration. Most of the components were unique to or released in significantly higher amounts from recycled HDPE compared to conventional HDPE. 129 of the components could be identified and analyzed for functional use. The analysis revealed “cosmetics”, “fragrance” and “flavoring” as major associations next to known and expected uses in the field of “plastics”, indicating significant introduction of foreign contaminants into the product. We present details on the compound classes involved and discuss consequences for political targets on increasing recycling rates in this product segment. T2 - International Conference on Non-Target Screening CY - Erding, Germany DA - 13.10.2025 KW - Extractables KW - Leachables KW - Untargeted analysis KW - Recycling KW - Polyethylene PY - 2025 AN - OPUS4-65742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -