TY - CONF A1 - Schlick-Hasper, Eva T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. T2 - IAPRI Bangkok 2022 23rd World Packaging Conference CY - Online meeting DA - 12.06.2022 KW - Sift-proofness KW - Powders KW - Flow properties KW - Flowability KW - Angle of repose KW - Hausner ratio PY - 2022 AN - OPUS4-55103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Olscher, C. A1 - Jandric, A. A1 - Zafiu, C. A1 - Part, Florian T1 - Evaluation of marker materials and spectroscopic methods for tracer-based sorting of plastic wastes N2 - Plastics are a ubiquitous material with good mechanical, chemical and thermal properties, and are used in all industrial sectors. Large quantities, widespread use, and insufficient management of plastic wastes lead to low recycling rates. The key challenge in recycling plastic waste is achieving a higher degree of homogeneity between the different polymer material streams. Modern waste sorting plants use automated sensor-based sorting systems capable to sort out commodity plastics, while many engineering plastics, such as polyoxymethylene (POM), will end up in mixed waste streams and are therefore not recycled. A novel approach to increasing recycling rates is tracer-based sorting (TBS), which uses a traceable plastic additive or marker that enables or enhances polymer type identification based on the tracer’s unique fingerprint (e.g., fluorescence). With future TBS applications in mind, we have summarized the literature and assessed TBS techniques and spectroscopic detection methods. Furthermore, a comprehensive list of potential tracer substances suitable for thermoplastics was derived from the literature. We also derived a set of criteria to select the most promising tracer candidates (3 out of 80) based on their material properties, toxicity profiles, and detectability that could be applied to enable the circularity of, for example, POM or other thermoplastics. KW - Circular economy KW - Post-consumer plastic waste KW - Plastic waste recycling KW - Tracer-based sorting KW - Sensor-based sorting KW - Spectroscopy KW - Fluorescent markers KW - Thermoplastics KW - Polyoxymethylene PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-555624 DO - https://doi.org/10.3390/polym14153074 SN - 2073-4360 VL - 14 SP - 1 EP - 20 PB - MDPI CY - Basel AN - OPUS4-55562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Bewertung von Fallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen N2 - Bericht über die Vorgehensweise der systematischen Untersuchungen zur Entwicklung angepasster Kriterien für die Bewertung von Aufprallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen T2 - AK Prüfstellen CY - Berlin, Germany DA - 21.09.2022 KW - Fallprüfung KW - Aufprallfundament KW - Gefahrgutverpackung KW - Fallfundament KW - Mechanische Sicherheitsprüfung PY - 2022 AN - OPUS4-55842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Bewertung von Fallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen N2 - Bericht über die Vorgehensweise der systematischen Untersuchungen zur Entwicklung angepasster Kriterien für die Bewertung von Aufprallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen T2 - ERFA Verpackungen CY - Berlin, Germany DA - 22.09.2022 KW - Fallprüfung KW - Aufprallfundament KW - Gefahrgutverpackung KW - Fallfundament KW - Mchanische Sicherheitsprüfung PY - 2022 AN - OPUS4-55843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Damage assessment of complete, filled fibreboard boxes in regulative vertical impact tests by dropping N2 - Due to the high damping mechanical properties of fibreboard materials, corrugated fibreboard boxes are widely used as transport packages of dangerous goods. Since there is a hazard of vertical impact within the distribution system, drop tests are performed as design type tests to assess the package’s ability to withstand damage. However, there is little information in this context regarding the mechanical response of a filled fibreboard box. This work aims to propose a concept utilizing experimental drop test results by means of finite-element (FE) analyses in order to predict the damage resistance of complete, filled corrugated fibreboard boxes which are ready for transportation. T2 - 38th Danubia Adria Symposium on Advances in Experimental Mechanics CY - Poros Island, Greece DA - 20.09.2022 KW - Drop test KW - Dangerous goods packagings KW - Corrugated fibreboard box KW - Finite-element-analysis KW - Explicit transient simulation KW - Crash simulation PY - 2022 AN - OPUS4-55845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 52, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2022 KW - Zulassungen KW - Anerkennungen PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567677 SN - 0340-7551 VL - 52 IS - 4 SP - 405 EP - 460 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings N2 - For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings. KW - Corrugated fibreboard box KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Mechanical response KW - Steel drum KW - Structural dynamics PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576985 DO - https://doi.org/10.1002/pts.2759 SN - 0894-3214 SP - 1 EP - 14 PB - John Wiley & Sons Ltd AN - OPUS4-57698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Goedecke, Thomas T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576552 DO - https://doi.org/10.1002/pts.2756 SN - 0894-3214 SP - 1 EP - 20 PB - Wiley AN - OPUS4-57655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings N2 - For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings. T2 - 31st IAPRI Members’ conference CY - Mumbai, India DA - 22.05.2023 KW - Drop test KW - Structural dynamics KW - Dangerous goods packagings KW - Impact target KW - Vibration analysis PY - 2023 AN - OPUS4-57715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. T2 - 31st IAPRI Members' Conference CY - Navi Mumbai, India DA - 22.05.2023 KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 AN - OPUS4-57619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - FEA of the mechanical response of installed impact target foundations in drop tests of dangerous goods packagings N2 - Packagings for the transport of dangerous goods need to meet special requirements to get an approval. This includes free fall drop testing onto an essentially unyielding surface as a means to assess a package’s resistance to mechanical damage. A main requirement for drop tests is that the impact target’s mass shall be at least 50 times that of the heaviest package to be tested. Nevertheless, many manufacturers do not possess foundation structures with the required mass ratio. Previous evidence highlights that the mass ratio is not a decisive criterion on its own. Parameters such as the impact target foundation’s connection and the impulse experienced by the impacting object are essential as well. However, these factors are not easily verifiable since experimental measurements are not possible at most facilities. The objective of this work is to provide a detailed analysis on the interaction between impact target foundation and subgrade in dynamic impact testing using validated finite-element (FE) models. This research is highly beneficial for industrial application since it allows manufacturers to make informed predictions about the mechanical response of installed impact target foundations. T2 - FEMS EUROMAT 2023 CY - Frankfurt a. M., Germany DA - 03.09.2012 KW - Dangerous goods packagings KW - Drop test KW - Foundation KW - Structural dynamics PY - 2023 AN - OPUS4-58213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Internationale Gefahrguttage Hamburg 2024 CY - Hamburg, Germany DA - 26.02.2024 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-59682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Die Gefahrgutregeln der BAM - Wichtige Handlungsanleitungen für die Praxis rund um Verpackungen, IBC und Großverpackungen für den Transport gefährlicher Güter N2 - Im Vortrag werden die Gefahrgutregeln der BAM vorgestellt, die für den Bereich Verpackungen, Großpackmittel und Großverpackungen relevant sind. Es wird ein Ausblick auf zukünftige Entwicklungen gegeben. T2 - 18. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 18.11.2021 KW - BAM-GGR KW - Gefahrgutregeln KW - Gefahrgutverpackungen PY - 2021 AN - OPUS4-58896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Nutzung von Recycling-Kunststoffen für die Produktion von Gefahrgutverpackungen – aktueller Stand der Norm ISO 16103 N2 - Im Vortrag wird der Stand der Weiterentwicklung der ISO 16103 dargestellt, in der Regelungen zur Qualitätssicherung bei der Herstellung von Recycling-Kunststoffen und daraus hergestellter Gefahrgutverpackungen enthalten sind. Darüber hinaus wird auf die Verbindungen zu den UN Model Regulations und zum ADR eingegangen und welche Konsequenzen sich daraus für die Zulassung und die Anerkennung des Qualitätssicherungsprogramms ergeben. T2 - 19. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 16.11.2023 KW - ISO 16103 KW - Recycling-Kunststoffe KW - Gefahrgutverpackungen PY - 2023 AN - OPUS4-58894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Gefahrgutverpackungen richtig verwenden N2 - Im Vortrag wird an Praxisbeispielen auf die richtige Nutzung von Gefahrgutverpackungen einschl. der Bewertung der UN-Kennzeichen und anderer vom Gefahrgutrecht vorgeschriebener Kennzeichen eingegangen. T2 - 09. Gefahrgut-Infomarkt CY - Online meeting DA - 16.05.2022 KW - Gefahrgutverpackungen KW - ADR KW - UN-Kennzeichen KW - Gefahrguttransport PY - 2022 AN - OPUS4-58895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Ablauf des Zustimmungsverfahrens zu alternativen Methoden zum Wasserbad in der BAM N2 - Dieser Vortrag gibt einen Überblick über den Ablauf zur Zustimmung alternativer Methoden der Dichtheitsprüfung für gefüllte Druckgaspackungen nach ADR 6.2.6.3.2. T2 - IGA-Herbstforum CY - Frankfurt am Main, Germany DA - 24.11.2023 KW - Druckgaspackungen KW - Zustimmung KW - Alternative Dichtheitsprüfverfahren PY - 2023 AN - OPUS4-59032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - el Dsoki, Chalid T1 - Hitzebeständigkeit von Funkgeräten N2 - Lithium-Akkus können bei großer Hitzeeinwirkung thermisch durchgehen. Und doch sind sie in vielen Geräten der Feuerwehr verbaut, zum Beispiel in Funkgeräten. Ein Sicherheitsrisiko beim Löscheinsatz? KW - Funkgeräte Löscheinsatz PY - 2023 IS - 12 SP - 64 EP - 66 AN - OPUS4-59075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapiere KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-58710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-58711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Schüttwinkelmessungen an festen Gefahrgütern N2 - Die in den von der BAM anerkannten Prüfstellen für Gefahrgutverpackungen gängigen Schüttwinkel-Messmethoden werden verglichen, anhand der Messung an fünf pulverförmigen oder körnigen Stoffen mit gefährlichen Eigenschaften. Zusätzlich wird die Untersuchung des Einflusses einer unterschiedlichen klimatischen Vorlagerung vorgenommen. T2 - 36. Sitzung des BAM AK Prüfstellen CY - Berlin, Germany DA - 12.09.2023 KW - Schüttwinkel KW - Pulver KW - Schüttgüter KW - Fließfähigkeit PY - 2023 AN - OPUS4-58278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rieck, Arielle A1 - Schwarz, Irina T1 - Electrochemical CO2 reduction (CO2RR) coupled to gas fermentation with acetogenic bacteria N2 - For the realization of a sustainable energy economy, it is of great importance to develop CO2 -neutral methods producing multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels. A promising method to alleviate the greenhouse effect and thereby forming value-added chemicals or syngas as an energy carrier, is through the electrochemical CO2 reduction reaction (CO2RR). In this work, a bioelectrotechnological approach is developed, in which the CO2RR reaction products (CO and H2) are directly fed to bacteria (acetogens), who use them as “reduction equivalents” to further metabolize CO2 to valuable carbon compounds. Therefore, a bio-electrochemical system consisting of a bioreactor coupled to a CO2 electrolysis cell will be established. Currently, scarce catalysts such as Ag and Au are used as for the CO2RR which may hamper the use of decentral CO2 conversion technology for cost reasons. The technological viability of the bacteria-assisted electrolysis depends on the usage of efficient, biocompatible, and selective electrocatalysts prepared from inexpensive precursors. Porous transition metal and nitrogen co-doped carbons (M-N-Cs) have emerged as precious-metal free electrocatalysts for the direct electrochemical reduction of CO2 into CO and are excellent candidates for scale-up and deployment in technological applications. Furthermore, Co/Ni/Zn functioning as the catalytically active sites will be used, as they are expected to depict non-bactericidal properties in contrast to Cu and Ag catalysts. The non-bactericidal property could e.g., allow for application within the hybrid device (bio-electrochemical system), without the need to separate bacteria and cathode catalyst. The MNCs with the most promising electrocatalytic activity and selectivity will be evaluated in abiotic conditions in the hybrid bio-electrochemical reactor system. T2 - DFG Summer School Workshop CY - Hamburg, Germany DA - 01.09.2022 KW - Katalysator KW - CO2 Reduktion KW - Bioelectrochemical CO2 reduction PY - 2022 AN - OPUS4-56618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rieck, Arielle A1 - Schwarz, Irina T1 - Valorization of CO2 by electrocatalytic reduction coupled to acetogens via multiple electron carriers (Ecat-acetogens) N2 - For the realization of a sustainable energy economy, it is of great importance to develop CO2 -neutral methods producing multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels. A promising method to alleviate the greenhouse effect and thereby forming value-added chemicals or syngas as an energy carrier, is through the electrochemical CO2 reduction reaction (CO2RR). In this work, a bioelectrotechnological approach is developed, in which the CO2RR reaction products (CO and H2) are directly fed to bacteria (acetogens), who use them as “reduction equivalents” to further metabolize CO2 to valuable carbon compounds. Therefore, a bio-electrochemical system consisting of a bioreactor coupled to a CO2 electrolysis cell will be established. Currently, scarce catalysts such as Ag and Au are used as for the CO2RR which may hamper the use of decentral CO2 conversion technology for cost reasons. The technological viability of the bacteria-assisted electrolysis depends on the usage of efficient, biocompatible, and selective electrocatalysts prepared from inexpensive precursors. Porous transition metal and nitrogen co-doped carbons (M-N-Cs) have emerged as precious-metal free electrocatalysts for the direct electrochemical reduction of CO2 into CO and are excellent candidates for scale-up and deployment in technological applications. Furthermore, Co/Ni/Zn functioning as the catalytically active sites will be used, as they are expected to depict non-bactericidal properties in contrast to Cu and Ag catalysts. The non-bactericidal property could e.g., allow for application within the hybrid device (bio-electrochemical system), without the need to separate bacteria and cathode catalyst. The MNCs with the most promising electrocatalytic activity and selectivity will be evaluated in abiotic conditions in the hybrid bio-electrochemical reactor system. T2 - DFG Summer School Workshop CY - Hamburg, Germany DA - 01.09.2022 KW - CO2 Reduktion KW - MNC catalyst KW - Clostridium ragsdalei PY - 2022 AN - OPUS4-56619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-57114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-57115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Johann, Sergej A1 - Kadoke, Daniel A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Zehn, Manfred W. T1 - Damage assessment of complete, filled fibreboard boxes in regulative vertical impact tests by dropping N2 - Due to the high damping mechanical properties of fiberboard materials, corrugated fiberboard boxes are widely used as transport packagings of dangerous goods. Since there is risk of vertical impact within the distribution system, drop tests are performed as design type tests to assess a package’s ability to withstand damage. In this context, however, little is known regarding the transient mechanical response of a filled fiberboard box. The reason is that the nature of the packaging material presents challenges in identifying the deformation mechanisms experimentally. The aim of this work is to provide a framework for predicting the damage resistance of complete, filled corrugated fiberboard boxes which are ready for transportation. Therein, drop test finite-element simulations are used and validated by experimental results. These numerical calculation models are a valuable tool for virtual product development and contribute to the optimization of the design cycle. KW - Finite-element-method KW - Digital image correlation KW - Dangerous goods packagings KW - Corrugated fiberboard box KW - Drop test PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575050 DO - https://doi.org/10.1016/j.matpr.2023.04.679 SP - 1 EP - 11 PB - Elsevier Ltd. AN - OPUS4-57505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -