TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 49, Heft 4 & Band 50, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 4/2019 & 1/2020 KW - Anerkennungen KW - Zulassungen KW - Richtlinien KW - Festlegungen PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508230 SN - 0340-7551 VL - 49 & 50 IS - 4/2019 & 1/2020 SP - 1 EP - 298 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-50823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Goedecke, Thomas T1 - Industrial leak testing of dangerous goods packagings N2 - The Dangerous Goods Regulations currently do not include limit leakage rates orsensitivity requirements for industrial leak testing procedures that are equivalent tothe bubble test, which is the prescribed test method for design type testing ofdangerous goods packagings. During series production of such packagings, variousmethods are used, which often do not meet the requirements of the bubble test withregard to important criteria.Sensitivity, flow direction, pressure level and automatability are particularly importantfactors when selecting a suitable industrial leak testing method.The following methods are in principle both suitable and equally effective as thebubble test: pressure rise test (vacuum chamber), ultrasonic bubble leak detectionand gas detection methods (pressure technique by accumulation and vacuumchamber technique).To ensure a uniform test level during design type testing and production line leaktesting and therefore a comparable safety level as required by the Dangerous GoodsRegulations, it is necessary to include a more precise specification in these regula-tions. This requires, on the one hand, information about the sensitivity of the bubbletest and, on the other hand, the inclusion of a list of suitable, equally effective indus-trial test methods with their specific boundary conditions. T2 - 22nd IAPRI World Packaging CY - Online meeting KW - Bubble test KW - Dangerous goods packagings KW - Industrial leak testing KW - Leakproofness test KW - Series production PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-507521 DO - https://doi.org/10.1002/pts.2502 SP - 1 EP - 14 PB - Wiley AN - OPUS4-50752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Ackermann, M. A1 - Senkel, U. T1 - Staubdichtheit von Gefahrgutsäcken und -FIBC - Überblick über Probleme in der derzeitigen Transportpraxis N2 - Gemäß den internationalen Gefahrgutvorschriften müssen Säcke und flexible Großpackmittel (Flexible Intermediate Bulk Container - FIBC) für feste Gefahrgüter staubdicht sein. In der Praxis der stichpunktartigen Kontrollen von Gefahrguttransporten durch die Autobahnpolizei Münster werden jedoch immer wieder Austritte von pulverförmigen oder körnigen Gefahrgütern aus eigentlich intakten Säcken und FIBC detektiert. Es wird ein Überblick über die im Jahr 2019 festgestellten Gefahrgutaustritte aus diesen Arten von Gefahrgutverpackungen gegeben. Darauf aufbauend wird eine systematische Einordnung hinsichtlich betroffener Bauarten und eine Diskussion möglicher Lösungsansätze vorgenommen. KW - Gefahrgutverpackungen KW - Staubdichtheit KW - Gefahrgutsäcke KW - FIBC KW - Gefahrgutkontrollen PY - 2020 SN - 2191-007 VL - 10 IS - 3 SP - 10 EP - 15 PB - VDI Fachmedien GmbH & Co. KG CY - Düsseldorf AN - OPUS4-50717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Fallversuche zur Bewertung von Fallfundamenten - Ausblick auf Untersuchungen der BAM N2 - Oft verfügen Produktionsstätten über bereits verbaute Fallfundamente, die nicht das geforderte Massenverhältnis von 1:50 aufweisen. Gemäß ADR ist jedoch auf dem Niveau der Musterprüfung zu prüfen. Es ist daher fraglich, ob die Prüfungen im Rahmen der Eigenüberwachung und die Baumusterprüfungen vergleichbare Ergebnisse liefern, wenn die Fallfundamente unterschiedlich beschaffen sind. Ziel der Untersuchungen ist daher die Entwicklung eines Untersuchungs- und Prüfkonzepts für bereits verbaute Fallfundamente für Gefahrgutverpackungen im Rahmen einer ingenieurwissenschaftlichen Promotionsarbeit. T2 - 33. Sitzung des BAM AK Prüfstellen CY - Online meeting DA - 16.09.2020 KW - Gefahrgutverpackungen KW - Fallfundamente PY - 2020 AN - OPUS4-51250 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Schüttwinkelmessungen - Ausblick auf Untersuchungen der BAM N2 - Es ist bislang noch keine einheitliche Vorgehensweise und kein bestimmtes Prüfverfahren für die Schüttwinkelmessung festgelegt. Bei den Prüffüllgütern handelt es sich nicht nur um gefährliche Ersatzfüllgüter, sondern zum Teil auch um gefährliche Originalfüllgüter. Es liegen noch keine systematische Untersuchungen darüber vor, welche der in den Prüfstellen gängigen Methoden sich prinzipiell für die Anwendung bei bestimmten Extremfällen von Füllgütern eignen. Ziel der Untersuchungen ist daher ein systematischer Vergleich bei der Anwendung verschiedener in den Prüfstellen gängiger Schüttwinkelmessmethoden. T2 - 33. Sitzung des BAM AK Prüfstellen CY - Online meeting DA - 16.09.2020 KW - Gefahrgutverpackungen KW - Schüttwinkel PY - 2020 AN - OPUS4-51248 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Fallversuche zur Bewertung von Fallfundamenten - Ausblick auf Untersuchungen der BAM N2 - Es wird ein Ausblick auf Untersuchungen der BAM gegeben, die im Rahmen einer ingenieurwissenschaftlichen Promotionsarbeit durchgeführt werden sollen. T2 - 40. Sitzung des ERFA Verpackungen CY - Online meeting DA - 05.11.2020 KW - Gefahrgutverpackungen KW - Fallfundamente PY - 2020 AN - OPUS4-51543 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Industrial leak testing of dangerous goods packagings N2 - The Dangerous Goods Regulations currently do not include limit leakage rates or sensitivity requirements for industrial leak testing procedures that are equivalent to the bubble test, which is the prescribed test method for design type testing of dangerous goods packagings. During series production of such packagings, various methods are used which often do not reach the sensitivity of the bubble test. Based on a suitable pragmatic approach, its sensitivity under industrial conditions can be considered 10-4 Pa m³/s (SLR). For the selection of a suitable industrial leak testing method, however, factors other than the sensitivity are also important, for example flow direction, pressure level and automatability. The following methods are in principal suitable and equally effective as the bubble test: pressure rise test (vacuum chamber), ultrasonic bubble leak detection and gas detection methods (pressure technique by accumulation and vacuum chamber technique). To ensure a uniform test level during design type testing and production line leak testing and therefore a comparable safety level as required by the Dangerous Goods Regulations, it is necessary to include a more precise specification in these regulations. On the one hand, this requires an information about the sensitivity of the bubble test, on the other hand, the inclusion of a list of suitable, equally effective industrial test methods with their specific boundary conditions T2 - 22nd IAPRI World Packaging Online Conference CY - Online meeting DA - 15.06.2020 KW - Bubble test KW - Dangerous goods packagings KW - Industrial leak testing KW - Leakproofness test KW - Series production PY - 2020 AN - OPUS4-51132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 51, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/2021 KW - Anerkennungen KW - Zulassungen KW - Richtlinien KW - Festlegungen PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-533350 SN - 0340-7551 VL - 51 IS - 3 SP - 111 EP - 134 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-53335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pampel, Jonas T1 - Natrium- und Lithium-Metall-Batterien - Wie gefährlich sind sie wirklich N2 - Das Verhalten von Batteriezellen bei Beschädigung ist von hoher Bedeutung für die Einschätzung der Sicherheit bei Transport, Lagerung sowie Verwendung. Vor allem im Zusammenhang mit dem exponentiell wachsenden Sektor der Lithium-Batterien kam es in der Vergangenheit immer wieder zu kritischen Vorfällen. Hierbei haben Lithium-Metall-Batterien, welche elementares Lithium enthalten, den Ruf besonders gefährlich zu sein. Um dieses Thema bewerten zu können, werden im Vortrag die Unterschiede zwischen Lithium-Ionen- und Lithium-Metall-Batterien erläutert und experimentelle Studien des Verhaltens von aktuellen Systemen bei Schädigung verglichen. Darüber hinaus wird auf die Eigenschaften sowie das Sicherheitsverhalten von zukünftigen Lithium- bzw. Natrium-Batterien eingegangen. T2 - Fachkonferenz Lithiumbatterien - Logistik, Lagerung und Entsorgung CY - Online meeting DA - 26.01.2021 KW - Lithium-Batterien KW - Sicherheit KW - Thermisches Durchgehen KW - Natrium-Batterien PY - 2021 AN - OPUS4-54055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pampel, Jonas T1 - Neues aus der Welt der Lithiumbatterien: Jüngste Forschungsergebnisse und deren Auswirkungen auf die Beförderung und Lagerung N2 - Das Verhalten von Batteriezellen bei Beschädigung ist von hoher Bedeutung für die Einschätzung der Sicherheit bei Transport, Lagerung sowie Verwendung. Die Auswirkungen bei Schädigung hängen natürlich von der Art der Zelle, jedoch auch vom Ladezustand und der Schädigungsmethode ab. Im Vortrag werden die Schädigungsversuche von Einzelzellen sowie Propagationsversuche an der BAM für verschieden Ladezustände präsentiert. Des Weiteren werden die aktuellen Vorgaben/Empfehlungen bezüglich der Lagerung von Lithium-Batterien kurz dargestellt. Darüber hinaus werden die neusten Entwicklung bezüglich der Vorgaben für den Transports von Natrium-Ionen-Batterien vorgestellt und diskutiert. T2 - 18. Gefahrgut Technik Tage CY - Berlin, Germany DA - 18.11.2021 KW - Lithium-Batterien KW - Sicherheit KW - Thermisches Durchgehen KW - Batterie-Lagerung KW - Batterie-Transport PY - 2021 AN - OPUS4-54078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bloi, L. M. A1 - Hippauf, F. A1 - Boenke, T. A1 - Rauche, M. A1 - Paasch, S. A1 - Schutjajew, K. A1 - Pampel, Jonas A1 - Schwotzer, F. A1 - Dörfler, S. A1 - Althues, H. A1 - Oschatz, M. A1 - Brunner, E. A1 - Kaskel, S. T1 - Mechanistic insights into the reversible lithium storage in an open porous carbon via metal cluster formation in all solid-state batteries N2 - Porous carbons are promising anode materials for next generation lithium batteries due to their large lithium storage capacities. However, their highsloping capacity during lithiation and delithiation as well as capacity fading due to intense formation of solid electrolyte interphase (SEI) limit their gravimetric and volumetric energy densities. Herein we compare a microporous carbide-derived carbon material (MPC) as promising future anode for all solid-state batteries with a commercial high-performance hard carbon anode. The MPC obtains high and reversible lithiation capacities of 1000 mAh g−1carbon in half-cells exhibiting an extended plateau region near 0 V vs. Li/Li+ preferable for full-cell application. The well-defined microporosity of the MPC with a specific surface area of >1500 m2 g−1 combines well with the argyrodite-type electrolyte (Li6PS5Cl) suppressing extensive SEI formation to deliver high coulombic efficiencies. Preliminary full-cell measurements vs. nickel-rich NMC-cathodes (LiNi0.9Co0.05Mn0.05O2) provide a considerably improved average potential of 3.76 V leading to a projected energy density as high as 449 Wh kg−1 and reversible cycling for more than 60 cycles. 7Li Nuclear Magnetic Resonance spectroscopy was combined with ex-situ Small Angle X-ray Scattering to elucidate the storage mechanism of lithium inside the carbon matrix. The formation of extended quasi-metallic lithium clusters after electrochemical lithiation was revealed. KW - All solid-state battery KW - Microporous carbon KW - Lithium battery KW - Anode PY - 2022 DO - https://doi.org/10.1016/j.carbon.2021.11.061 SN - 0008-6223 VL - 188 SP - 325 EP - 335 PB - Elsevier Ltd. AN - OPUS4-54079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts-und Mitteilungsblatt, Band 51, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/2021 KW - Anerkennungen KW - Zulassungen KW - Gefahrgutregeln KW - Festlegungen KW - Richtlinien PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527760 SN - 0340-7551 VL - 51 IS - 1 SP - 1 EP - 70 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-52776 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Goedecke, Thomas T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2021 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 UR - https://whova.io/email/click/d11d7d6cf1c84dfdc8c12349468fe91c/c9af5bcf002312cff80d9b962d1014e4/ SN - 978-1-63821-160-0 SP - 390 EP - 405 PB - IAPRI CY - East Lansing, Michigan, USA AN - OPUS4-52786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - 30th IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2020 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 AN - OPUS4-52827 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Thomas, Goedecke T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. KW - Bags KW - Dangerous goods packagings KW - Leak KW - Particles KW - Sift-proofness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527287 DO - https://doi.org/10.1002/pts.2575 SN - 0894-3214 VL - 34 IS - 7 SP - 435 EP - 446 PB - Wiley AN - OPUS4-52728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schutjajew, K. A1 - Pampel, Jonas A1 - Zhang, W. A1 - Antonietti, M. A1 - Oschatz, M. T1 - Influence of pore architecture and chemical structure on the sodium storage in nitrogen‐doped hard carbons N2 - Hard carbon is the material of choice for sodium ion battery anodes. Capacities comparable to those of lithium/graphite can be reached, but the understanding of the underlying sodium storage mechanisms remains fragmentary. A two‐step process is commonly observed, where sodium first adsorbs to polar sites of the carbon (“sloping region”) and subsequently fills small voids in the material (“plateau region”). To study the impact of nitrogen functionalities and pore geometry on sodium storage, a systematic series of nitrogen‐doped hard carbons is synthesized. The nitrogen content is found to contribute to sloping capacity by binding sodium ions at edges and defects, whereas higher plateau capacities are found for materials with less nitrogen content and more extensive graphene layers, suggesting the formation of 2D sodium structures stabilized by graphene‐like pore walls. In fact, up to 84% of the plateau capacity is measured at potentials less than 0 V versus metallic Na, that is, quasimetallic sodium can be stabilized in such structure motifs. Finally, gas physisorption measurements are related to charge discharge data to identify the energy storage relevant pore architectures. Interestingly, these are pores inaccessible to probe gases and electrolytes, suggesting a new view on such “closed pores” required for efficient sodium storage. KW - Sodium Ion Batteries KW - Hard Carbon KW - Storage Mechanism KW - Anode PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-522529 DO - https://doi.org/10.1002/smll.202006767 VL - 17 IS - 48 SP - 2006767 PB - Wiley Online Library AN - OPUS4-52252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Schüttwinkeluntersuchungen nach Vorlagerung bei 23 °C und 50 % r. F. N2 - In den von der BAM anerkannten Prüfstellen kommen derzeit unterschiedliche Methoden der Schüttwinkelmessung zum Einsatz. Es ist unklar, welche dieser Methoden sich prinzipiell für welche Füllgüter eignen. Daher werden derzeit systematische Untersuchungen an der BAM durchgeführt, die im folgenden vorgestellt werden. T2 - 34. Sitzung des BAM AK Prüfstellen CY - Online meeting DA - 28.09.2021 KW - Gefahrgutverpackungen KW - Schüttwinkel KW - Fließfähigkeit KW - Hausner-Faktor PY - 2021 AN - OPUS4-53414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Vogler, Nico A1 - Goedecke, Thomas T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. KW - Sift-proofness KW - Powders KW - Flowability KW - Flow properties KW - Angle of repose KW - Hausner ratio PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552990 DO - https://doi.org/10.1002/pts.2678 SP - 1 EP - 18 PB - Wiley online library AN - OPUS4-55299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Fließeigenschaften von festen Gefahrgütern - Vergleich der Messung des Schüttwinkels und der Bestimmung des Hausner-Faktors N2 - Fazit: Nachteile der Schüttwinkel-Messmethoden: Einschränkungen bei der Anwendbarkeit auf Füllgüter mit bestimmten Eigenschaften; Die einzelnen Methoden liefern dann unterschiedliche Ergebnisse (statist. signifikante Abweichung der Mittelwerte); Schlechte Wiederholbarkeit; Bedienereinfluss spielt Rolle; Gewährleistung des Arbeitsschutzes schwierig; Bestimmung des Hausner-Faktors: Keins dieser Defizite Mögliche Abhilfemaßnahmen: Prüfbericht und Zulassungsschein sollten zumindest die Methode angeben, die zur Messung des Schüttwinkels 𝛼 eingesetzt wurde; Einheitliches Verfahren zur Schüttwinkelmessung (DIN-Methode)? Umstellung des Systems auf einen alternativen Parameter zur Bestimmung der Fließeigenschaften: Hausner-Faktor 𝐻: Bessere Wiederholbarkeit der Ergebnisse; Zuverlässige Anwendbarkeit auch auf Extremfälle von Schüttgütern; Sicherere Handhabung von Gefahrgütern T2 - 35. Sitzung des BAM AK Prüfstellen CY - Berlin, Germany DA - 21.09.2022 KW - Gefahrgutverpackungen KW - Schüttwinkel KW - Hausner-Faktor KW - Pulver PY - 2022 AN - OPUS4-55810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Schlick-Hasper, Eva A1 - Müller, Karsten A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. T1 - Development of an analysis and testing concept for the evaluation of impact targets in the mechanical safety testing of dangerous goods packagings N2 - The mechanical and geometrical properties of impact targets greatly influence the outcome of a drop test. The International Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) as well as ISO 2248 describe the characteristics of impact targets for drop tests of dangerous goods packagings. According to these regulations, the impact target’s surface needs to be unyielding, under testing conditions non-deformable, flat, and integral with a mass at least 50 times that of the heaviest packaging to be tested. The problem is that many production facilities, especially manufacturers of corrugated fibreboard boxes, do not have their own testing device with the required 50 times mass ratio of the impact target for a regulation compliant drop test during series production. Furthermore, at UN level it is considered necessary to revise these requirements. In the present paper, the impact target requirements are examined in detail and compared with those in other technical areas (e.g., impact target for container for the transport of radioactive materials). A research method is being developed to investigate the dependency between the mass ratio of the packaging and the target as well as the damage resistance of a drop tested package in relation to specific design characteristics. The results are of high relevance for industry purposes and intended to ensure a uniform level of safety assessment for the mechanical testing of dangerous goods packagings. KW - Corrugated fibreboard boxes KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Structural dynamics PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-549660 DO - https://doi.org/10.1002/pts.2656 SN - 0894-3214 SN - 1099-1522 VL - 35 IS - 9 SP - 689 EP - 700 PB - Wiley CY - New York, NY AN - OPUS4-54966 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Development of an analysis and testing concept for the evaluation of impact targets in the mechanical safety testing of dangerous goods packagings N2 - The mechanical and geometrical properties of impact targets greatly influence the outcome of a drop test. The International Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) as well as ISO 2248 describe the characteristics of impact targets for drop tests of dangerous goods packagings. According to these regulations, the impact target’s surface needs to be unyielding, under testing conditions non-deformable, flat, and integral with a mass at least 50 times that of the heaviest packaging to be tested. The problem is that many production facilities, especially manufacturers of corrugated fibreboard boxes, do not have their own testing device with the required 50 times mass ratio of the impact target for a regulation compliant drop test during series production. Furthermore, at UN level it is considered necessary to revise these requirements. In the present paper, the impact target requirements are examined in detail and compared with those in other technical areas (e.g., impact target for container for the transport of radioactive materials). A research method is being developed to investigate the dependency between the mass ratio of the packaging and the target as well as the damage resistance of a drop tested package in relation to specific design characteristics. The results are of high relevance for industry purposes and intended to ensure a uniform level of safety assessment for the mechanical testing of dangerous goods packagings. T2 - IAPRI Bangkok 2022, 23rd World Packaging Conference CY - Online meeting DA - 12.06.2022 KW - Corrugated fibreboard boxes KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Structural dynamics PY - 2022 AN - OPUS4-55121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. T2 - IAPRI Bangkok 2022 23rd World Packaging Conference CY - Online meeting DA - 12.06.2022 KW - Sift-proofness KW - Powders KW - Flow properties KW - Flowability KW - Angle of repose KW - Hausner ratio PY - 2022 AN - OPUS4-55103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Olscher, C. A1 - Jandric, A. A1 - Zafiu, C. A1 - Part, Florian T1 - Evaluation of marker materials and spectroscopic methods for tracer-based sorting of plastic wastes N2 - Plastics are a ubiquitous material with good mechanical, chemical and thermal properties, and are used in all industrial sectors. Large quantities, widespread use, and insufficient management of plastic wastes lead to low recycling rates. The key challenge in recycling plastic waste is achieving a higher degree of homogeneity between the different polymer material streams. Modern waste sorting plants use automated sensor-based sorting systems capable to sort out commodity plastics, while many engineering plastics, such as polyoxymethylene (POM), will end up in mixed waste streams and are therefore not recycled. A novel approach to increasing recycling rates is tracer-based sorting (TBS), which uses a traceable plastic additive or marker that enables or enhances polymer type identification based on the tracer’s unique fingerprint (e.g., fluorescence). With future TBS applications in mind, we have summarized the literature and assessed TBS techniques and spectroscopic detection methods. Furthermore, a comprehensive list of potential tracer substances suitable for thermoplastics was derived from the literature. We also derived a set of criteria to select the most promising tracer candidates (3 out of 80) based on their material properties, toxicity profiles, and detectability that could be applied to enable the circularity of, for example, POM or other thermoplastics. KW - Circular economy KW - Post-consumer plastic waste KW - Plastic waste recycling KW - Tracer-based sorting KW - Sensor-based sorting KW - Spectroscopy KW - Fluorescent markers KW - Thermoplastics KW - Polyoxymethylene PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-555624 DO - https://doi.org/10.3390/polym14153074 SN - 2073-4360 VL - 14 SP - 1 EP - 20 PB - MDPI CY - Basel AN - OPUS4-55562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Bewertung von Fallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen N2 - Bericht über die Vorgehensweise der systematischen Untersuchungen zur Entwicklung angepasster Kriterien für die Bewertung von Aufprallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen T2 - AK Prüfstellen CY - Berlin, Germany DA - 21.09.2022 KW - Fallprüfung KW - Aufprallfundament KW - Gefahrgutverpackung KW - Fallfundament KW - Mechanische Sicherheitsprüfung PY - 2022 AN - OPUS4-55842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Bewertung von Fallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen N2 - Bericht über die Vorgehensweise der systematischen Untersuchungen zur Entwicklung angepasster Kriterien für die Bewertung von Aufprallfundamenten in der mechanischen Sicherheitsprüfung von Gefahrgutverpackungen T2 - ERFA Verpackungen CY - Berlin, Germany DA - 22.09.2022 KW - Fallprüfung KW - Aufprallfundament KW - Gefahrgutverpackung KW - Fallfundament KW - Mchanische Sicherheitsprüfung PY - 2022 AN - OPUS4-55843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Damage assessment of complete, filled fibreboard boxes in regulative vertical impact tests by dropping N2 - Due to the high damping mechanical properties of fibreboard materials, corrugated fibreboard boxes are widely used as transport packages of dangerous goods. Since there is a hazard of vertical impact within the distribution system, drop tests are performed as design type tests to assess the package’s ability to withstand damage. However, there is little information in this context regarding the mechanical response of a filled fibreboard box. This work aims to propose a concept utilizing experimental drop test results by means of finite-element (FE) analyses in order to predict the damage resistance of complete, filled corrugated fibreboard boxes which are ready for transportation. T2 - 38th Danubia Adria Symposium on Advances in Experimental Mechanics CY - Poros Island, Greece DA - 20.09.2022 KW - Drop test KW - Dangerous goods packagings KW - Corrugated fibreboard box KW - Finite-element-analysis KW - Explicit transient simulation KW - Crash simulation PY - 2022 AN - OPUS4-55845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 52, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2022 KW - Zulassungen KW - Anerkennungen PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567677 SN - 0340-7551 VL - 52 IS - 4 SP - 405 EP - 460 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings N2 - For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings. KW - Corrugated fibreboard box KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Mechanical response KW - Steel drum KW - Structural dynamics PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576985 DO - https://doi.org/10.1002/pts.2759 SN - 0894-3214 SP - 1 EP - 14 PB - John Wiley & Sons Ltd AN - OPUS4-57698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Goedecke, Thomas T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576552 DO - https://doi.org/10.1002/pts.2756 SN - 0894-3214 SP - 1 EP - 20 PB - Wiley AN - OPUS4-57655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings N2 - For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings. T2 - 31st IAPRI Members’ conference CY - Mumbai, India DA - 22.05.2023 KW - Drop test KW - Structural dynamics KW - Dangerous goods packagings KW - Impact target KW - Vibration analysis PY - 2023 AN - OPUS4-57715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. T2 - 31st IAPRI Members' Conference CY - Navi Mumbai, India DA - 22.05.2023 KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 AN - OPUS4-57619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - FEA of the mechanical response of installed impact target foundations in drop tests of dangerous goods packagings N2 - Packagings for the transport of dangerous goods need to meet special requirements to get an approval. This includes free fall drop testing onto an essentially unyielding surface as a means to assess a package’s resistance to mechanical damage. A main requirement for drop tests is that the impact target’s mass shall be at least 50 times that of the heaviest package to be tested. Nevertheless, many manufacturers do not possess foundation structures with the required mass ratio. Previous evidence highlights that the mass ratio is not a decisive criterion on its own. Parameters such as the impact target foundation’s connection and the impulse experienced by the impacting object are essential as well. However, these factors are not easily verifiable since experimental measurements are not possible at most facilities. The objective of this work is to provide a detailed analysis on the interaction between impact target foundation and subgrade in dynamic impact testing using validated finite-element (FE) models. This research is highly beneficial for industrial application since it allows manufacturers to make informed predictions about the mechanical response of installed impact target foundations. T2 - FEMS EUROMAT 2023 CY - Frankfurt a. M., Germany DA - 03.09.2012 KW - Dangerous goods packagings KW - Drop test KW - Foundation KW - Structural dynamics PY - 2023 AN - OPUS4-58213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Internationale Gefahrguttage Hamburg 2024 CY - Hamburg, Germany DA - 26.02.2024 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-59682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Die Gefahrgutregeln der BAM - Wichtige Handlungsanleitungen für die Praxis rund um Verpackungen, IBC und Großverpackungen für den Transport gefährlicher Güter N2 - Im Vortrag werden die Gefahrgutregeln der BAM vorgestellt, die für den Bereich Verpackungen, Großpackmittel und Großverpackungen relevant sind. Es wird ein Ausblick auf zukünftige Entwicklungen gegeben. T2 - 18. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 18.11.2021 KW - BAM-GGR KW - Gefahrgutregeln KW - Gefahrgutverpackungen PY - 2021 AN - OPUS4-58896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Nutzung von Recycling-Kunststoffen für die Produktion von Gefahrgutverpackungen – aktueller Stand der Norm ISO 16103 N2 - Im Vortrag wird der Stand der Weiterentwicklung der ISO 16103 dargestellt, in der Regelungen zur Qualitätssicherung bei der Herstellung von Recycling-Kunststoffen und daraus hergestellter Gefahrgutverpackungen enthalten sind. Darüber hinaus wird auf die Verbindungen zu den UN Model Regulations und zum ADR eingegangen und welche Konsequenzen sich daraus für die Zulassung und die Anerkennung des Qualitätssicherungsprogramms ergeben. T2 - 19. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 16.11.2023 KW - ISO 16103 KW - Recycling-Kunststoffe KW - Gefahrgutverpackungen PY - 2023 AN - OPUS4-58894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neitsch, Marcel T1 - Gefahrgutverpackungen richtig verwenden N2 - Im Vortrag wird an Praxisbeispielen auf die richtige Nutzung von Gefahrgutverpackungen einschl. der Bewertung der UN-Kennzeichen und anderer vom Gefahrgutrecht vorgeschriebener Kennzeichen eingegangen. T2 - 09. Gefahrgut-Infomarkt CY - Online meeting DA - 16.05.2022 KW - Gefahrgutverpackungen KW - ADR KW - UN-Kennzeichen KW - Gefahrguttransport PY - 2022 AN - OPUS4-58895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Ablauf des Zustimmungsverfahrens zu alternativen Methoden zum Wasserbad in der BAM N2 - Dieser Vortrag gibt einen Überblick über den Ablauf zur Zustimmung alternativer Methoden der Dichtheitsprüfung für gefüllte Druckgaspackungen nach ADR 6.2.6.3.2. T2 - IGA-Herbstforum CY - Frankfurt am Main, Germany DA - 24.11.2023 KW - Druckgaspackungen KW - Zustimmung KW - Alternative Dichtheitsprüfverfahren PY - 2023 AN - OPUS4-59032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - el Dsoki, Chalid T1 - Hitzebeständigkeit von Funkgeräten N2 - Lithium-Akkus können bei großer Hitzeeinwirkung thermisch durchgehen. Und doch sind sie in vielen Geräten der Feuerwehr verbaut, zum Beispiel in Funkgeräten. Ein Sicherheitsrisiko beim Löscheinsatz? KW - Funkgeräte Löscheinsatz PY - 2023 IS - 12 SP - 64 EP - 66 AN - OPUS4-59075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapiere KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-58710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Katja A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln. T2 - Stuttgarter Gefahrguttag CY - Stuttgart, Germany DA - 24.10.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-58711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva T1 - Vergleichende Schüttwinkelmessungen an festen Gefahrgütern N2 - Die in den von der BAM anerkannten Prüfstellen für Gefahrgutverpackungen gängigen Schüttwinkel-Messmethoden werden verglichen, anhand der Messung an fünf pulverförmigen oder körnigen Stoffen mit gefährlichen Eigenschaften. Zusätzlich wird die Untersuchung des Einflusses einer unterschiedlichen klimatischen Vorlagerung vorgenommen. T2 - 36. Sitzung des BAM AK Prüfstellen CY - Berlin, Germany DA - 12.09.2023 KW - Schüttwinkel KW - Pulver KW - Schüttgüter KW - Fließfähigkeit PY - 2023 AN - OPUS4-58278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rieck, Arielle A1 - Schwarz, Irina T1 - Electrochemical CO2 reduction (CO2RR) coupled to gas fermentation with acetogenic bacteria N2 - For the realization of a sustainable energy economy, it is of great importance to develop CO2 -neutral methods producing multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels. A promising method to alleviate the greenhouse effect and thereby forming value-added chemicals or syngas as an energy carrier, is through the electrochemical CO2 reduction reaction (CO2RR). In this work, a bioelectrotechnological approach is developed, in which the CO2RR reaction products (CO and H2) are directly fed to bacteria (acetogens), who use them as “reduction equivalents” to further metabolize CO2 to valuable carbon compounds. Therefore, a bio-electrochemical system consisting of a bioreactor coupled to a CO2 electrolysis cell will be established. Currently, scarce catalysts such as Ag and Au are used as for the CO2RR which may hamper the use of decentral CO2 conversion technology for cost reasons. The technological viability of the bacteria-assisted electrolysis depends on the usage of efficient, biocompatible, and selective electrocatalysts prepared from inexpensive precursors. Porous transition metal and nitrogen co-doped carbons (M-N-Cs) have emerged as precious-metal free electrocatalysts for the direct electrochemical reduction of CO2 into CO and are excellent candidates for scale-up and deployment in technological applications. Furthermore, Co/Ni/Zn functioning as the catalytically active sites will be used, as they are expected to depict non-bactericidal properties in contrast to Cu and Ag catalysts. The non-bactericidal property could e.g., allow for application within the hybrid device (bio-electrochemical system), without the need to separate bacteria and cathode catalyst. The MNCs with the most promising electrocatalytic activity and selectivity will be evaluated in abiotic conditions in the hybrid bio-electrochemical reactor system. T2 - DFG Summer School Workshop CY - Hamburg, Germany DA - 01.09.2022 KW - Katalysator KW - CO2 Reduktion KW - Bioelectrochemical CO2 reduction PY - 2022 AN - OPUS4-56618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rieck, Arielle A1 - Schwarz, Irina T1 - Valorization of CO2 by electrocatalytic reduction coupled to acetogens via multiple electron carriers (Ecat-acetogens) N2 - For the realization of a sustainable energy economy, it is of great importance to develop CO2 -neutral methods producing multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels. A promising method to alleviate the greenhouse effect and thereby forming value-added chemicals or syngas as an energy carrier, is through the electrochemical CO2 reduction reaction (CO2RR). In this work, a bioelectrotechnological approach is developed, in which the CO2RR reaction products (CO and H2) are directly fed to bacteria (acetogens), who use them as “reduction equivalents” to further metabolize CO2 to valuable carbon compounds. Therefore, a bio-electrochemical system consisting of a bioreactor coupled to a CO2 electrolysis cell will be established. Currently, scarce catalysts such as Ag and Au are used as for the CO2RR which may hamper the use of decentral CO2 conversion technology for cost reasons. The technological viability of the bacteria-assisted electrolysis depends on the usage of efficient, biocompatible, and selective electrocatalysts prepared from inexpensive precursors. Porous transition metal and nitrogen co-doped carbons (M-N-Cs) have emerged as precious-metal free electrocatalysts for the direct electrochemical reduction of CO2 into CO and are excellent candidates for scale-up and deployment in technological applications. Furthermore, Co/Ni/Zn functioning as the catalytically active sites will be used, as they are expected to depict non-bactericidal properties in contrast to Cu and Ag catalysts. The non-bactericidal property could e.g., allow for application within the hybrid device (bio-electrochemical system), without the need to separate bacteria and cathode catalyst. The MNCs with the most promising electrocatalytic activity and selectivity will be evaluated in abiotic conditions in the hybrid bio-electrochemical reactor system. T2 - DFG Summer School Workshop CY - Hamburg, Germany DA - 01.09.2022 KW - CO2 Reduktion KW - MNC catalyst KW - Clostridium ragsdalei PY - 2022 AN - OPUS4-56619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-57114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Tscheuschner, Frank T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln T2 - Internationale Gefahrgut-Tage Hamburg 2023 CY - Hamburg, Germany DA - 27.02.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-57115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Johann, Sergej A1 - Kadoke, Daniel A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Zehn, Manfred W. T1 - Damage assessment of complete, filled fibreboard boxes in regulative vertical impact tests by dropping N2 - Due to the high damping mechanical properties of fiberboard materials, corrugated fiberboard boxes are widely used as transport packagings of dangerous goods. Since there is risk of vertical impact within the distribution system, drop tests are performed as design type tests to assess a package’s ability to withstand damage. In this context, however, little is known regarding the transient mechanical response of a filled fiberboard box. The reason is that the nature of the packaging material presents challenges in identifying the deformation mechanisms experimentally. The aim of this work is to provide a framework for predicting the damage resistance of complete, filled corrugated fiberboard boxes which are ready for transportation. Therein, drop test finite-element simulations are used and validated by experimental results. These numerical calculation models are a valuable tool for virtual product development and contribute to the optimization of the design cycle. KW - Finite-element-method KW - Digital image correlation KW - Dangerous goods packagings KW - Corrugated fiberboard box KW - Drop test PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575050 DO - https://doi.org/10.1016/j.matpr.2023.04.679 SP - 1 EP - 11 PB - Elsevier Ltd. AN - OPUS4-57505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John T1 - Fließeigenschaften fester Gefahrgüter vor dem Hintergrund der Sicherheit beim Gefahrguttransport in Gefahrgutverpackungen - Teil 2: Vergleichende Schüttwinkeluntersuchungen N2 - In den deutschen Zulassungen für Gefahrgutverpackungen muss der minimale Schüttwinkel angegeben werden, für den die Verpackung verwendet werden darf. Dieser fungiert als Maß für die Fließeigenschaften pulverförmiger oder körniger Stoffe und ist wichtig für die Sicherheit beim Gefahrguttransport. In den Prüfstellen existiert jedoch eine Reihe von Messmethoden für diese Kenngröße. In der Vergangenheit war hierbei unklar, welche dieser Methoden für welche Prüffüllgüter prinzipiell geeignet sind. Die BAM nahm dies zum Anlass, die gebräuchlichen Messmethoden systematisch zu untersuchen. Dieser Artikel gibt einen Gesamtüberblick über die Ergebnisse und stellt die Schlussfolgerungen für die Prüfpraxis in den anerkannten Prüfstellen für Gefahrgutverpackungen dar. KW - Schüttwinkel KW - Gefahrgut KW - Fließeigenschaften PY - 2024 SN - 2191-007 VL - 14 IS - 09-10 SP - 19 EP - 24 PB - VDI Fachmedien GmbH und Co. KG CY - Düsseldorf AN - OPUS4-60986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John T1 - Fließeigenschaften fester Gefahrgüter vor dem Hintergrund der Sicherheit beim Gefahrguttransport in Gefahrgutverpackungen - Teil 1: Einführung N2 - Die Fließeigenschaften fester Gefahrgüter spielen für die Sicherheit beim Gefahrguttransport eine wichtige Rolle. Diese haben einen Einfluss sowohl auf die mechanische Sicherheit der verwendeten Verpackung als auch auf die Freisetzung fester Substanzen unter normalen Beförderungsbedingungen aufgrund ungenügender Staubdichtheit. Bei festen Gefahrgütern kann es sich entweder um pulverförmige oder um körnige Stoffe handeln. Um der sicherheitsrelevanten Bedeutung der Fließeigenschaften fester Füllgüter Rechnung zu tragen, muss in den deutschen Zulassungen für Gefahrgutverpackungen der minimale Schüttwinkel angegeben werden, für welche die Verpackung verwendet werden darf. In der Praxis der Prüfstellen existiert jedoch eine Reihe von Messmethoden für diese Kenngröße. In der Vergangenheit war hierbei unklar, welche dieser Methoden für welche Prüffüllgüter prinzipiell geeignet sind. Es ist jedoch essenziell, die Vor- und Nachteile sowie die Grenzen der einzelnen Verfahren zu kennen. Dieser Artikel gibt eine Einführung in die Thematik und in experimentelle Untersuchungen, die in der BAM durchgeführt wurden, um eine Klärung herbeizuführen. Die Ergebnisse dieser Versuche werden in einem Folgeartikel vorgestellt. KW - Schüttwinkel KW - Gefahrgut KW - Fließeigenschaften PY - 2024 VL - 14 IS - 07-08 SP - 23 EP - 29 PB - VDI Fachmedien GmbH und Co. KG CY - Düsseldorf AN - OPUS4-60985 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos T1 - Drop test simulation of packaging for dangerous goods: Investigation of appropriate drop height adjustment N2 - In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision which is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, e.g., plastic deformation. In this work, a test stand is developed for measuring the change in kinetic energy of different packaging designs and filling substances in regulative drop tests. The experimental results are used to validate finite-element (FE) models so that packaging properties can be varied in simulated drop test scenarios. The findings intend to describe the appropriate drop height adjustment of the respective packaging with same design but deviating gross mass to produce comparable mechanical response. The results are highly beneficial for testing laboratories, approval issuing authorities and packaging institutes confronted with the problem of testing packages with gross masses other than those to be approved. T2 - 24th IAPRI World Conference CY - Valencia, Spain DA - 17.06.2024 KW - Dangerous goods packagings KW - FEM KW - Drop test KW - Mechanical response PY - 2024 AN - OPUS4-60607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hong, H. A1 - Part, Florian A1 - Nowack, B. T1 - Prospective dynamic and probabilistic material flow analysis of graphene-based materials in Europe from 2004 to 2030 N2 - As industrial demand for graphene-based materials (GBMs) grows, more attention falls on potential environmental risks. The present article describes a first assessment of the environmental releases of GBMs using dynamic probabilistic material flow analysis. The model considered all current or expected uses of GBMs from 2004 to 2030, during which time there have already been significant changes in how the graphene mass produced is distributed to different product categories. Although the volume of GBM production is expected to grow exponentially in the coming years, outflow from the consumption of products containing GBMs shows only a slightly positive trend due to their long lifetimes and the large in-use stock of some applications (e.g., GBM composites used in wind turbine blades). From consumption and end-of-life phase GBM mass flows in 2030, estimates suggest that more than 50% will be incinerated and oxidized in waste plants, 16% will be landfilled, 12% will be exported out of Europe, and 1.4% of the annual production will flow to the environment. Predicted release concentrations for 2030 are 1.4 ng/L in surface water and 20 μg/kg in sludge-treated soil. This study’s results could be used for prospective environmental risk assessments and as input for environmental fate models. KW - Graphene KW - Graphene-based material (GBM) KW - Material flow analysis KW - Exposure modeling PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-568843 DO - https://doi.org/10.1021/acs.est.2c04002 SN - 0013-936X SN - 1520-5851 VL - 56 SP - 13798 EP - 13809 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-56884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick‐Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, Manfred W. T1 - Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass N2 - In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision that is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, for example, plastic deformation. In this work, a test stand KW - Corrugated fibreboard box KW - Dangerous goods packagings KW - Drop test KW - Impact target KW - Mechanical response KW - Structural dynamics PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614138 DO - https://doi.org/10.1002/pts.2858 SP - 1 EP - 18 PB - Wiley AN - OPUS4-61413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 50, Heft 2 & 3 T3 - Amts- und Mitteilungsblatt der BAM - 2/2020 & 3/2020 KW - Anerkennungen KW - Zulassungen KW - Gefahrgutregeln KW - Festlegungen KW - Richtlinien PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-512342 SN - 0340-7551 VL - 50 IS - 2 & 3 SP - 1 EP - 151 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-51234 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 50, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2020 KW - Gefahrgutregeln KW - Anerkennungen KW - Zulassungen KW - Richtlinien KW - Festlegungen PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527351 SN - 0340-7551 VL - 50 IS - 4 SP - 451 EP - 474 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-52735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 51, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/2021 KW - Anerkennungen KW - Zulassungen KW - Gefahrgutregeln KW - Festlegungen KW - Richtlinien KW - Gebührenverordnung KW - Preis- Leistungsverzeichnis PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-529061 SN - 0340-7551 VL - 51 IS - 2 SP - 71 EP - 110 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-52906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 52, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/2022 PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545287 SN - 0340-7551 VL - 52 IS - 1 SP - 1 EP - 54 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-54528 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 52, Heft 2 T3 - Amts- und Mitteilungsblatt der BAM - 2/2022 KW - Festlegungen KW - Zulassungen KW - Richtlinien KW - Anerkennungen PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550917 SN - 0340-7551 VL - 52 IS - 2 SP - 55 EP - 158 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 51, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2021 PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-541902 SN - 0340-7551 VL - 51 IS - 4 SP - 135 EP - 158 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-54190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 52, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/2022 KW - Anerkennungen KW - Zulassungen KW - Richtlinien PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-558323 SN - 0340-7551 VL - 52 IS - 3 SP - 159 EP - 404 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-55832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 53, Heft 1 T3 - Amts- und Mitteilungsblatt der BAM - 1/2023 KW - Anerkennungen KW - Zulassungen KW - Richtlinien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-574038 SN - 0340-7551 VL - 53 IS - 1 SP - 1 EP - 340 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-57403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 53, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/2023 KW - Anerkennungen KW - Zulassungen KW - Richtlinien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-585302 SN - 0340-7551 VL - 53 IS - 3 SP - 463 EP - 516 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-58530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 53, Heft 4 T3 - Amts- und Mitteilungsblatt der BAM - 4/2023 KW - Anerkennungen KW - Zulassungen PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-592823 SN - 0340-7551 VL - 53 IS - 4 SP - 517 EP - 540 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-59282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Die Aufgaben der BAM im Gefahrgutbereich - ein Überblick N2 - Die BAM ist eine der zuständigen Behörden im Gefahrgutbereich in Deutschland und nach der Gefahrgutverordnung Straße, Eisenbahn und Binnenschifffahrt (GGVSEB) und der Gefahrgutverordnung See (GGVSee) für diverse Aufgaben zuständig, wie z. B. große Teile der Klassifizierung gefährlicher Güter, die Verwendung, Prüfung, und Zulassung von Gefahrgutverpackungen oder auch die Verwendung, den Bau und die Prüfung von Gefahrguttanks. Sie berät die Bundesregierung bei der Ausrichtung der Gefahrgutpolitik durch Mitarbeit im Ständigen Ausschuss Gefahrgutbeförderung (AGGB) des Gefahrgut-Verkehrs-Beirates beim BMV und wirkt nach dem Erlass über die BAM im Einvernehmen mit dem BMWK in nationalen und internationalen Regel setzenden Gremien und Normungsgremien mit. Damit leistet sie einen wertvollen Beitrag zur Sicherheit im Gefahrgutbereich. T2 - 35. Münchner Gefahrgut-Tage CY - Munich, Germany DA - 25.05.2025 KW - Gefahrgut KW - Zuständige Behörde KW - GGVSEB KW - GGVSee KW - AGGB KW - Normung PY - 2025 AN - OPUS4-64051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Lengas, Nikolaos T1 - Parameter study of impact targets in the drop test of packaging for dangerous goods N2 - Within the transportation chain, impact loading of dangerous goods packagings can happen. Thus, a package’s resistance against mechanical damage needs to be assessed. In the context of dangerous goods transport, drop tests are used for damage assessment as a part of packaging approval. Hence, a horizontal, flat unyielding surface must be provided to ensure maximum damage on impact and univocal test results. Leading adopted regulations like ADR/RID reference ISO 2248 to specify the requirements for the impact surface. The main requirement states that the impact surface must belong to an impact target with a mass at least 50 times higher than that of the heaviest package to be tested. However, many manufacturers in Germany, especially manufacturers of fibreboard boxes, do not have their own testing device with the required mass ratio for the drop test. Furthermore, the necessity of requirement revision has been addressed at UN level. It is unclear if mass ratio is the decisive criterion or if alternative design parameters can be defined to guarantee rigidity of the impact surface. The focus of the research reported in this thesis lays in the development and implementation of an analysis and testing concept for a comprehensive investigation of impact targets in drop testing. To this end, an experimental setup consisting of regulation compliant model impact targets is used in drop tests with two packaging types of significantly different mechanical properties. The variation of drop test parameters, such as the mass ratio, provides new insights into their respective significance in the drop test outcome. In addition, experimental findings are enhanced with numerical Finite-Element (FE) analyses to propose new improved criteria which incorporate all relevant influencing factors. In this way, firstly, critical impact target designs can be identified, and secondly, the kinetic energy of a real impact target in a drop test can be reliably approximated and compared to the respective theoretical threshold derived from a worst-case assumption. Thus, the rigid mass ratio currently specified in ISO 2248 can be regarded obsolete. The results of this work are highly beneficial for industrial application since they form the basis for introducing a standardized method for evaluating impact targets, replacing the 50 times mass ratio requirement. This would enable manufacturing and testing facilities to ensure a uniform level of safety assessment and to avoid the considerably high construction costs of impact targets with mass ratio of 1:50 in relation to packaging gross masses of several hundred kilograms. Hence, to make the results attained under laboratory conditions usable in practical application, preliminary investigations of the mechanical response of installed impact targets are conducted. For this purpose, important factors such as the interaction between impact target and ground in dynamic impact testing conditions are examined using validated FE models to establish an evaluation method. The investigations aim to create the basis for the revision of ISO 2248 and to define a standardized reference method for impact target characterization. KW - Drop test KW - Structural dynamics KW - Dangerous goods packaging KW - Mass ratio KW - Finite-element-method PY - 2025 DO - https://doi.org/10.14279/depositonce-24333 SP - 1 EP - 189 CY - Berlin AN - OPUS4-64090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Neue Brandlasten - neue Aufgaben für die Feuerwehr N2 - Die zunehmende Verbreitung von elektrischen Energiespeicher und Flüssiggasspeicher ermöglichen eine erfolgreiche Transition zu einer CO2 neutralen Energieversorgung. Allerdings bringen neue Energiespeicher mit hohen Energiedichten auch zusätzliche Herausforderungen für die Feuerwehr der Zukunft mit sich. Insbesondere Lithiumbatterien können bei falscher Handhabung zum thermischen Durchgehen führen. Dies kann katastrophale Auswirkungen mit sich bringen. Der Umstieg auf Wasserstoff als neuen Energieträger birgt ebenfalls zusätzliche Risiken und Unsicherheiten für die Einsatzkräfte. Daher ist die Lageeinschätzung und der möglichen Gefahren am Einsatzort für die Feuerwehrkräfte essenziell notwendig. T2 - Transfer on fire CY - Ludwigsfelde, Germany DA - 14.08.2024 KW - Lithiumbatterien KW - Sicherheit von Energieträgern KW - Gefahrguttransport PY - 2024 AN - OPUS4-61502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Untersuchungen für den Transport gekühlter Batterien Vorstellung des Nageltests N2 - Im Zusammenhang mit den Untersuchungen zu den Möglichkeiten von gekühlten Transporten von Lithiumbatterien werden unterschiedliche Zerstörungsmethoden vorgestellt und diskutiert. Insbesondere wird dabei das neu entwickelte Nageltool und die vorläufigen Untersuchungen für den Einfluss von Ultratiefkühlung auf unbeschädigte Lithiumbatterien vorgestellt. T2 - ERFA-Verpackungen CY - Berlin, Germany DA - 22.09.2022 KW - Lithiumbatterien KW - Thermal Runaway KW - Gefahrguttransport KW - Nageltest PY - 2022 AN - OPUS4-56759 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Untersuchungen für den Transport gekühlter Batterien Vorstellung des Nageltests N2 - Im Zusammenhang mit den Untersuchungen zu den Möglichkeiten von gekühlten Transporten von Lithiumbatterien werden unterschiedliche Zerstörungsmethoden vorgestellt und diskutiert. Insbesondere wird dabei das neu entwickelte Nageltool vorgestellt. T2 - Fachkonferenz Lithiumbatterien CY - Goettingen, Germany DA - 28.04.2022 KW - Lithiumbatterien KW - Thermal Runaway KW - Gefahrguttransport KW - Nageltest PY - 2022 AN - OPUS4-56758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Schulz-Forberg, Bernd A1 - Eiben, Mario T1 - Transport gefährlicher Güter - Bereitstellung reaktiver Stoffe für Prozesse N2 - Bei dem Transport gefährlicher Güter handelt es sich um Transporte auf dem Land, also der Straße, der Schiene, auf den Binnenwasserstraßen sowie auf der See und in der Luft. Die gefährlichen Güter sind in aller Regel Stoffe, deren herausragende Eigenschaft die Reaktivität ist. „Reaktivität, auch Reaktionsfreudigkeit oder Triebkraft der Stoffe, ist eine Kern-Eigenschaft der chemischen Stoffe, also auch der einzelnen Elemente und Verbindungen, und bezeichnet damit die Fähigkeit der Stoffe, in Wechselwirkung mit anderen Stoffen zu treten, spontan und unter Freisetzung von Energie chemische Reaktionen auszulösen und im Ergebnis neue chemische Stoffe zu bilden. Diese Triebkraft resultiert aus dem Bestreben der Stoffe, möglichst abgeschlossene und damit energetisch günstigere Elektronenhüllen zu schaffen und damit zu erhalten. Im Verlauf der chemischen Reaktion kommt es daher zwischen den Partnermolekülen zum Austausch, d. h. zur Aufnahme und Abgabe von Elektronen und damit zugleich zur gemeinsamen Nutzung der abgeschlossenen Elektronenhülle und zu einem stabilen energetischen Zustand. Reaktive Stoffe haben meist sog. funktionelle Gruppen, also Doppel- oder Dreifachbindungen, oder sie enthalten Chlor-, Sauerstoff- oder Stickstoffatome. Wie es die Begriffe Reaktionsfreudigkeit oder Bildungstrieb andeuten, steckt eine Kraft in den chemischen Stoffen, die sie antreibt, sodass die Reaktionen oft sehr lebhaft bis stürmisch und unter Freisetzung von Wärme verlaufen (exotherme Reaktionen). Verlaufen die Reaktionen sogar explosionsartig, dann kommt es nicht zur Bindung, sondern dann gehen die Moleküle im wahrsten Sinne des Wortes in die Brüche. Friedrich der Große schrieb dazu 1777 an Voltaire: ‚... Was soll ich zu den Chemikern sagen, die, anstatt Gold zu machen, es bei ihren Experimenten in Rauch aufgehen lassen?’ (Voltaire, Friedrich II, Briefwechsel).“ Soweit ein Zitat aus einem Brief von Frau Prof. Dr. Ursula Stephan, Halle, 2024. Im Prinzip werden diese reaktiven Stoffe (gefährliche Güter) entweder zum Lager, zum Handel und somit zum Verbraucher oder zu Prozessanlagen transportiert, in denen sie den wesentlichen Bestandteil der stofflichen Seite in den Reaktoren darstellen. In den unterschiedlichsten Prozessen in der Wirtschaft ist diese Reaktivität der eingesetzten Stoffe unverzichtbare Voraussetzung für erfolgreiche Prozessdurchführungen. Die Vorlesungen der Autoren dieses Buches über den Transport gefährlicher Güter sind seit 2006 an der Hochschule für Wirtschaft und Recht Berlin (HWR), der Hoch-schule Furtwangen (HFU) und der Berliner Hochschule für Technik (BHT, ehemals Beuth Hochschule für Technik) angeboten worden. Die Industrie-und Handelskammern in Berlin und Reutlingen hatten jeweils die Vorlesungen an der HFU und der HWR zeitweise als Ausbildungsstoff und die Vortragenden als Dozenten gleichwertig für die Vorbereitung zur Prüfung für den Gefahrgutbeauftragten für die Straße nach der Gefahrgutbeauftragtenverordnung (GbV) anerkannt. Die Studierenden konnten sich nach absolvierter Vorlesung direkt bei der IHK zur Prüfung anmelden, ohne einen weiteren Kurs bei einem von der IHK anerkannten Schulungsveranstalter zu absolvieren. Mit diesem Buch soll das komplexe und umfangreiche System zur Beförderung gefährlicher Güter für den Leser aufgeschlossen werden, was auch die Managementebene einschließt. Die Regulierung bestimmter Vorgänge findet nach Austausch vieler Ideen im inter-nationalen Raum statt und wirkt dann auch in den unmittelbaren Bereich der Firmen, einschließlich der kleinen und mittleren Unternehmen (KMU), zurück. Das Thema muss verstanden werden, und zwar in der Sache und im Prozess des Werdegangs. Hierzu finden sich hilfreiche Texte, die für das Management für zukünftiges Vorgehen wertvoll sein können. Auch, wenn sich das Buch grundsätzlich auf die Beförderung gefährlicher Güter auf der Straße bezieht, können die meisten Angaben auch auf die Vorschriften für die anderen Verkehrsträger (Schiene, Binnenschifffahrt, Seeschifffahrt und den zivilen Luftverkehr) angewandt werden. Auch wird an dieser Stelle deutlich darauf hingewiesen, dass das Buch keinen Anspruch auf vollständige Abbildung der Gefahrgutvorschriften, insbesondere des ADR, erhebt. Vielmehr wird auf die wichtigsten Aspekte hingewiesen, die aus Sicht der Autoren für das Verstehen und den Umgang mit den Vorschriften essenziell sind. KW - Gefahrgut KW - ADR KW - UN Recommendations on the Transport of Dangerous Goods KW - ICAO TI KW - IMDG-Code KW - RID KW - ADN KW - Safety and Security in Transport PY - 2025 SN - 978-3-662-71449-2 SN - 978-3-662-71450-8 DO - https://doi.org/10.1007/978-3-662-71450-8 VL - 2025 SP - I EP - 241 PB - Springer Vieweg CY - Berlin AN - OPUS4-64028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Die Aufgaben der BAM als zuständige Behörde im Gefahrgutbereich in Deutschland N2 - Die BAM ist zuständige Behörde in Deutschland für bestimmte Aufgaben im Gefahrgutbereich, die u. a. in § 8 der Gefahrgutverordnung Straße, Eisenbahn und Binnenschifffahrt (GGVSEB) und § 12 der Gefahrgutverordnung See (GGVSee) aufgeführt sind und hauptsächlich von den Abteilungen 2 und 3 wahrgenommen werden. So ist die BAM bspw. die in Deutschland für die Zulassung von Verpackungen und Tanks oder auch die Einstufung bestimmter gefährlicher Güter zuständige Stelle. Die BAM arbeitet des Weiteren als Kompetenzbehörde national und international in den entsprechenden Gremien mit und berät das BMDV in der Rechtsfortentwicklung der internationalen Vorschriften für den Gefahrguttransport. Dies geschieht u. a. durch die Mitarbeit im Ständigen Ausschuss Gefahrgutbeförderung (AGGB) des Gefahrgut-Verkehrs-Beirats beim BMDV und den zugehörigen Arbeitsgruppen, oder auch das Erstellen von Anträgen für Rechtsänderungen in den internationalen Vorschriften der Vereinten Nationen (UN) bzw. der Wirtschaftskommission für Europa der UN (UNECE) im Auftrag des BMDV. Die Beratung der betroffenen Wirtschaft und die Normungsarbeit sind weitere wichtige Themen. Die Expertise der BAM wird insbesondere durch Forschung im Gefahrgutbereich erhalten und weiter ausgebaut. Im Rahmen des Vortrags werden drei Forschungsbereiche vorgestellt, von denen zwei für die Energiewende von großer Bedeutung sind. T2 - 10. Deutsche Gefahrgut-Sicherheitstage CY - Nürburg, Germany DA - 13.09.2023 KW - Gefahrgut KW - Zuständige Behörde KW - Transport gefährlicher Güter KW - Gremienarbeit KW - Normung KW - Forschung KW - Gesetzliche Aufgaben PY - 2023 AN - OPUS4-58350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Simon, Katja A1 - Eiben, Mario A1 - Damm, David A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - 19. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 16.11.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapier KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-59106 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT N2 - Es werden die Anwendungen des Gefahrgutdatenpools der BAM aufgezeigt, der ein zentrales Informationssystem für den Transport gefährlicher Güter darstellt. T2 - Münchner Gefahrguttage 2023 CY - Munich, Germany DA - 15.05.2023 KW - BAM-Liste KW - Datenbank GEFAHRGUT KW - Gefahrgut-Schnellinfo KW - Gefahrgutdatenpool KW - Gefahrguttransport KW - Informationssystem KW - Kurzinfo KW - Modul für Beförderungspapiere KW - Modul für radioaktive Stoffe KW - BAM List KW - Dangerous Goods Database KW - Dangerous Goods Quickinfo KW - Radioactive Materials Module KW - Transport Documents Module PY - 2023 AN - OPUS4-57530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln T2 - Münchner Gefahrguttage 2023 CY - Munich, Germany DA - 15.05.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-57531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Eiben, Mario T1 - Fachinformationssystem Datenbank GEFAHRGUT - Modul für Beförderungspapiere N2 - Die Vorteile bei der Erstellung von Beförderungspapieren mit dem Modul der Datenbank GEFAHRGUT werden dargestellt. Dazu zählen u.a. die einfache Erstellung eines Beförderungspapieres für Stückgut im Straßenverkehr durch Nutzung eines Schritt-für-Schritt-Assistenten, bei dem z. B. grundsätzliche Verbote der Zusammenladung und -packung geprüft werden. Bei der Auswahl der Verpackung werden bei Einzelverpackungen und IBCs nur Verpackungen/IBCs angeboten, die für den jeweiligen Stoff zulässig sind. T2 - Internationale Gefahrgut-Tage Hamburg CY - Hamburg, Germany DA - 17.02.2020 KW - Datenbank GEFAHRGUT KW - Gefahrgut KW - Modul für Beförderungspapiere KW - Gefahrguttransport KW - Dangerous Goods Database KW - Dangerous Goods KW - Transport Documents Modul KW - Dangerous Goods transport PY - 2020 AN - OPUS4-50442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Sichere Beförderung von Batterien - Klassifizierung und Verpackung N2 - Die Präsentation gibt einen Überblick über die Aufgaben der BAM als zuständige Behörde im Gefahrgutbereich, insbesondere, was die Beförderung von Lithiumbatterien betrifft. Es wird ein Überblick über die erforderlichen Prüfungen für Gefahrgutverpackungen, die entsprechenden Bauarten (Verpackungen und Großverpackungen) inkl. UN-Kennzeichen gegeben und anschließend auf die Aufgaben im Bereich Lithiumbatterien eingegangen. Hierbei werden folgende Fragen beantwortet: 1. Welche Eintragungen (UN-Nummern) gibt es im Gefahrgutrecht? 2. Welche Prüfungen sind für Lithiumbatterien und -zellen erforderlich? 3. Welche Sondervorschriften und Verpackungsanweisungen gelten für intakte, gebrauchte und kritisch-defekte Lithiumbatterien? 4. Wie müssen die Versandstücke gekennzeichnet und bezettelt werden?). T2 - Lehrgang "Moderne elektrochemische Energiespeicher" der Bundeswehr CY - Mannheim, Germany DA - 16.09.2024 KW - Lithiumbatterien KW - Natrium-Ionen-Batterien KW - Gefahrgut KW - Verpackungen KW - Gesetzliche Aufgaben der BAM KW - Kritisch-defekte Batterien PY - 2024 AN - OPUS4-61587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Farahbakhsh, Mahin A1 - Simon, Katja A1 - Eiben, Mario A1 - Damm, David A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Fachinformationssystem Datenbank GEFAHRGUT - Hilfe bei der Kennzeichnung der Umweltgefahr N2 - Möglichkeiten der Datenbank GEFAHRGUT und des Gefahrgutdatenservices die Notwendigkeit der Kennzeichnung der Umweltgefahr zu ermitteln. T2 - 19. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 16.11.2023 KW - Datenbank KW - Fachinformationssystem KW - Gefahrgut KW - Kennzeichnung KW - Umweltgefahr KW - Dangerous goods KW - Database KW - Environmentally hazardous substance KW - Labelling KW - Specialised information system PY - 2023 AN - OPUS4-59107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario T1 - Die Aufgaben der BAM als zuständige Behörde im Gefahrgutbereich in Deutschland N2 - Auszug aus den gesetzlichen Aufgaben, Mitarbeit in Gremien und aktuellen Forschungsarbeiten der BAM im Bereich "Beförderung gefährlicher Güter". T2 - 31. Münchner Gefahrgut-Tage CY - Online meeting DA - 10.05.2021 KW - Beförderung gefährlicher Güter KW - Gefahrgut KW - Gesetzliche Aufgaben KW - Forschung KW - Gremienarbeit KW - Zuständige Behörde PY - 2021 AN - OPUS4-52647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Lithium-Ionen-Batterien: Aktuelles aus der Forschung Optimierungsmöglichkeiten beim Transport kritisch-defekter Batterien N2 - Durch den gekühlte Transport von kritisch defekten Lithium-Batterien können Zellen unterhalb ihrer initialen Reaktionstemperatur inert und ohne thermisches Durchgehen sicher transportiert werden. Allerdings kann das Auftauen von kritischen Zellen je nach Beständigkeit der Kurzschlusses dennoch zum thermischen Durchgehen führen. Zusätzlich sollte ein direkter Kontakt mit dem Kühlmedium sollte unterbunden werden, da dieses sonst in die Zellen eindringen kann. Anhand der vorgestellten Ergebnisse zeigt sich zudem keine allgemeingültige sichere Transporttemperatur. T2 - IAA Transportation CY - Hannover, Germany DA - 19.09.2024 KW - Thermal runaway KW - Low temperature KW - Lithium-ion batteries KW - Abuse testing PY - 2024 AN - OPUS4-62320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Kalte Kiste - Tieftemperatur Transport eine sichere Option für kritische Batterien? N2 - Obwohl Batterien und im Besonderen Lithiumbatterien bei normaler Benutzung sicher sind, kann ein Fehlerfall zu einem katastrophalen Event führen. Dabei können giftige Gase frei werden und es kann bis zum Brand der gesamten Batterie kommen. Daher muss der Transport beschädigter Batterien unter sicheren Bedingungen erfolgen. Die Zuständigkeit für den sicheren Transport kritisch defekter Batterien in Deutschland hat die BAM inne. In diesem Zusammenhang erforscht die BAM an sicheren Transportbedingungen, welche im Rahmen dieser Präsentation vorgestellt werden. Dabei zeigen Lithiumbatterien unterhalb einer individuellen Temperatur keinerlei Reaktionen bei kritischer Beschädigung. Diese Temperatur wird als initiale Reaktionstemperatur (IRT) definiert. Ferner kann diese IRT mit einem einfachen elektrischen Test bestimmt werden. Ein Auftauen nach der kritischen Beschädigung kann dennoch zum thermischen Durchgehen (TR) führen. Dieser kann jedoch zusätzlich auch lokal begrenzt auftreten. Das Schockfrosten während des laufenden TR führt nicht immer dazu, dass der TR gestoppt wird. T2 - VDA AK Gefahrgutbeauftragte CY - Berlin, Germany DA - 11.02.2025 KW - Lithiumbatterien KW - Batteriesicherheit KW - Gekühlter Transport PY - 2025 AN - OPUS4-63347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaeger, Carsten T1 - Umfassende Analyse von Leachables aus rezyklierten HDPE-Kanistern N2 - Weitestgehendes Recycling vorhandener Materialien und Produkte ist ein wesentlicher Bestandteil der Kreislaufwirtschaft. Verpackungen auf Kunststoffbasis, darunter Behälter für Lebensmittel und Getränke, aber auch für die Lagerung und den Transport von Chemikalien und Gefahrgütern, werden derzeit größtenteils aus fossilen Rohstoffen hergestellt. Doch selbst für diese „kontaktempfindlichen“ Produkte besteht weiterhin das Ziel der Nachhaltigkeit durch den Einsatz von Recyclingmaterialien. Diese sehr aktuelle Diskussion findet derzeit im Rahmen der EU-Verpackungs- und Verpackungsabfallverordnung (PPWR) statt, die voraussichtlich noch in diesem Jahr abgeschlossen sein wird. Bei Verpackungen für den Transport gefährlicher Güter sind die Sicherheitseigenschaften der Behälter aus „neuen“ Materialien, einschließlich Polyethylen (PE), gut bekannt und werden im Rahmen ihrer Bauartzulassung getestet. Über ihre Gegenstücke aus Recyclingmaterialien ist jedoch weitaus weniger bekannt. Abgesehen von Materialschwächung kann der Eintrag von Rückständen in recycelte Kunststoffe zu einer Verunreinigung der Waren in der Verpackung führen. Um diese Lücke zu schließen, haben wir Kanister aus hochdichtem PE (HDPE) aus Post-Consumer-Abfällen auf die Freisetzung von Kunststoffzusätzen und Verunreinigungen untersucht. Mithilfe eines umfassenden, nicht zielgerichteten Ansatzes mit hochauflösender Massenspektrometrie (HRMS) konnten wir je nach Art der gelagerten Chemikalie und Lagerdauer 895 verschiedene Komponenten detektieren. Die meisten Komponenten waren alleinig oder in wesentlich höherer Konzentration in recyceltem HDPE als in herkömmlichem HDPE nachzuweisen. 154 der Komponenten konnten identifiziert und auf ihre funktionale Verwendung hin analysiert werden. Interessanterweise ergab diese Analyse „Kosmetik“, „Duftstoffe“ und „Geschmacksstoffe“ als Hauptassoziationen neben bekannten und erwarteten Verwendungen im Bereich „Kunststoffe“. Dies deutete auf einen erheblichen Eintrag von Fremdverunreinigungen in das Produkt hin. Rezyklierte Kanister zeigten damit deutliche Nachteile im Vergleich zu herkömmlichen Kanistern. Eine detaillierte Bewertung der Ergebnisse im Hinblick auf die Materialsicherheit in diesem Produktsegment steht noch aus. T2 - Erfahrungsaustausch Verpackungen 2024 CY - Berlin, Germany DA - 17.09.2024 KW - Extractables & Leachables KW - Hochauflösende Massenspektrometrie KW - Nontarget-Analyse KW - Gefahrgutbehälter PY - 2024 AN - OPUS4-61057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eiben, Mario A1 - Tscheuschner, Frank A1 - Stahl, Michael T1 - Gefahrgut-Daten und -Recherche DGG-Info gebührenfrei im Internet N2 - Im Zuge ihrer Open-Source-Strategie stellt die BAM die neue Recherche (DGG-Info) und den Gefahrgut-Datenservice unter www.dgg.bam.de gebührenfrei zur Verfügung. Sie leistet damit einen wichtigen Beitrag zur digitalen Transformation und Standardisierung im Gefahrgutbereich. T2 - Gefahrgut-Techik-Tage Berlin CY - Berlin, Germany DA - 13.11.2025 KW - Gefahrgut KW - Gefahrgutdaten KW - Gefahrgutrecherche KW - Datenbank GEFAHRGUT KW - Dangerous goods KW - Dangerous goods data KW - Dangerous goods research KW - Dangerous goods database PY - 2025 AN - OPUS4-64807 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Bethke, John T1 - Verfahren zur Anerkennung und Anwendung alternativer Prüfverfahren im Rahmen der Baumusterprüfung sowie der Fertigungsüberwachung von Gefahrgutverpackungen N2 - Diese BAM-Gefahrgutregel gilt für alternative Prüfverfahren im Rahmen der Durchführung der Baumusterprüfungen sowie der Fertigungsüberwachung (Eigenüberwachung und Überwachungsbegehungen nach BAM-GGR 001) von Verpackungen, Großpackmitteln (IBC) und Großverpackungen für den Transport gefährlicher Güter. KW - Prüfverfahren KW - Baumusterprüfung KW - Fertigungsüberwachung KW - Gefahrgutverpackungen PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644530 UR - https://tes.bam.de/TES/Content/DE/Downloads/ggr-025_allgemeinverf%C3%BCgung.pdf?__blob=publicationFile VL - BAM-GGR 025 SP - 1 EP - 5 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - Revision 0 AN - OPUS4-64453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - You, Zengchao A1 - Hoffmann, V. A1 - Morcillo, Dalia A1 - Agudo Jácome, Leonardo A1 - Leonhardt, Robert A1 - Winckelmann, Alexander A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Abad Andrade, Carlos Enrique T1 - Investigation of aluminum current collector degradation in lithium-ion batteries using glow discharge optical emission spectrometry N2 - In this work, we employed glow discharge optical emission spectrometry (GD-OES) depth profiling as a fast and semi-quantitative method to investigate the aluminum (Al) current collector degradation in commercial lithium cobalt oxide (LCO) pouch cells with no Al2O3 pretreatment. After battery aging, a heterogeneous deposit was found on the surface of the cathode. Gray hotspot areas within an extensive pale white region were formed. Consistent with energy dispersive X-ray (EDX) analysis of micro-cross sections milled via targeted focused ion beam (FIB), an Al-containing layer of approximately 3 µm can be observed using GD-OES. We attribute one main cause of this layer is the degradation of the Al current collector. The nonuniform growth of this layer was investigated by performing GD-OES depth profiling at different in-plane positions. We found that the gray area has a higher mass concentration of Al, probably in metallic form, whereas the white area was probably covered more homogeneously with Al2O3, resulting from the inhomogeneous distribution of the pitting positions on the current collector. Compared to FIB-EDX, GD-OES enables a faster and more convenient depth profile analysis, which allows the more productive characterization of lithium-ion batteries (LIBs), and consequently benefits the development of preferable battery materials. KW - GD-OES KW - depth profiles KW - Li-ion battery KW - battery aging mechanism KW - current collector corrosion PY - 2023 DO - https://doi.org/10.1016/j.sab.2023.106681 SN - 0584-8547 VL - 205 SP - 106681 PB - Elsevier B.V. CY - Amsterdam, Netherlands AN - OPUS4-57383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Schmidt, Anita T1 - Verfahren zur Erfüllung der zusätzlichen Prüfanforderungen für den Transport kritisch-defekter Lithiumbatterien N2 - Die BAM-Gefahrgutregel BAM-GGR 024 regelt das Verfahren zur Erfüllung der zusätzlichen Prüfanforderungen für den Transport kritisch-defekter Lithiumbatterien. Die BAM als zuständige Behörde für den Transport kritisch-defekter Lithiumbatterien in Deutschland hat dieses Verfahren nach ADR, RID und ADN SV 376 i.V. mit P911 und LP906 festgelegt. KW - Gefahrgutverpackungen KW - Gefahrguttransport PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-623368 UR - https://tes.bam.de/TES/Content/DE/Downloads/ggr-024.pdf?__blob=publicationFile VL - BAM-GGR 024 SP - 1 EP - 13 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - Revision 1 AN - OPUS4-62336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Duffner, Eric A1 - el Dsoki, Chalid A1 - John, Sebastian A1 - Schmidt, Anita A1 - Mair, Georg W. A1 - Loechner, Derek A1 - Drousch, Björn T1 - Sicherheitstechnische Bewertung thermischer Betriebsbelastung auf sicherheitskritische Ausrüstung am Beispiel von Composite-Atemluftflaschen und Lithiumbatterien N2 - Ziel des Vorhabens war es, den Einfluss der realen Temperaturbelastung auf Atemschutzflaschen und Lithiumbatterien in Funkgeräten (FG) im Löscheinsatz von Rettungskräften zu ermitteln und deren Auswirkung auf die Alterung und Lebensdauer sowie die potenziellen Gesundheitsgefahren bei deren Nutzung besser beurteilen zu können und Handlungshilfen abzuleiten. Im Rahmen dieses Vorhabens wurden zum einen unterschiedlich thermisch gealterte Composite-Atemluftflaschen systematisch hinsichtlich ihrer Restfestigkeiten untersucht. Zum anderen wurden Lithiumbatterien aus FG hinsichtlich der Einwirkung von kritischen Temperaturen untersucht, ab denen es zu einem thermischen Durchgehen der Batterien kommen kann. Für diese beiden wichtigen Komponenten, Lithiumbatterien und Composite-Atemluftflaschen, wurden kritische Temperatur-Zeit-Profile ermittelt, die Auswirkungen durch geeignete Methodiken untersucht und die sich ergebenden Gefährdungen für den Träger bewertet. Als Methodische Vorgehensweise wurden durch Realversuche die tatsächlichen und zuvor durch Literatur-recherche ermittelten Temperaturprofile verifiziert und auf deren Grundlage die Laborbelastungen abgeleitet. Um den Eigenschaften der aus Faserverbundwerkstoffen hergestellten Composite-Atemluftflaschen Rechnung zu tragen, wurden an zwei repräsentativen Baumustern unterschiedlicher Hersteller Stichprobengruppen unterschiedlicher thermischer Belastung ausgesetzt und hinsichtlich ihrer verbleibenden Restfestigkeitsabnahme geprüft und mit thermisch unbelasteten Baumustern verglichen. Neben den statischen Berstversuchen wurden auch kombinierte Alterungs- und Restfestigkeitsuntersuchungen an zyklisch belasteten Behältern durchgeführt. Die FG wurden thermisch sowohl statischen als auch zyklischen Belastungen ausgesetzt und mit Kapazitätsmessungen begleitet. Die statischen Versuche dienten dem Zweck, die maximale thermische Belastbarkeit der Akkus zu ermitteln, bei der noch kein Versagen auftritt. Bei den zyklischen Versuchen wurde der Temperaturverlauf bei Löscheinsätzen so nah wie möglich im Labor nachgestellt. Hierbei wurden die Akkus wiederholt einem Belastungsprofil mit konstanter Temperatur ausgesetzt und nach einigen Intervallen die Restkapazitäten am Akku gemessen und so die Degradation bestimmt. Als Fazit der im Rahmen dieses Vorhabens durchgeführten Untersuchungen an zwei repräsentativen Baumustern von Atemschutzflaschen kann gefolgert werden, dass die thermischen Belastungen abhängig vom Baumuster einen z.T. deutlichen Einfluss auf die Restfestigkeiten der Atemschutzflaschen haben. Höhere thermische Exposition ist, zumindest an den untersuchten Atemschutzflaschen, deutlich zu erkennen und die Flaschen können durch die zuständigen Gerätewarte leicht ausgesondert und ersetzt werden. Die thermischen Belastungen, wie sie im Rettungseinsatz auftreten, waren für die untersuchten Atemschutzflaschen und die Rettungskräfte nicht kritisch sind. Die langjährige Erfahrung etablierter Hersteller dürfte hier aber nicht ohne Einfluss sein. Es ist somit kein Grund erkennbar, von der Verwendung der leichteren Typ 4 Atemschutzflaschen abzuraten, wenn Atemschutzflaschen, die visuell erkennbare thermische Einwirkungen (Farbänderungen, Materialschmelzungen o.ä.) aufweisen, unmittelbar ersetzt werden. Die Ergebnisse an den FG zeigen, dass trotz hoher Temperaturen keine Selbstentzündung der Lithiumbatterien ausgelöst wird. Der Kapazitätsverlust der Batterien infolge der Belastung führt ebenfalls nicht zu einem Funktionsausfall. Es konnte gezeigt werden, dass die Kapazitätsbestimmung als zuverlässiges und geeignetes Kriterium für die Sicherheitsbewertung der Akkus herangezogen werden kann, wenn die Kapazitätsmessung bei gleichbleibenden Bedingungen (gleiche Raumtemperaturen, gleiche Messgeräte, etc.) stattfindet. Es wird empfohlen, die Akkus ab einer Restkapazität von unter 80% zu tauschen. Als schnelle und sehr einfache Überprüfung kann eine Sichtprüfung an den FG stattfinden. Die im Projekt verwendeten FG zeigten eine Verformung der Kunststoffhülle bei zu hohen Belastungen. N2 - The aim of the project was to determine the influence of the real temperature load on breathing apparatus cylinders and Lithium batteries in radio devices in firefighting operations by rescue services and to be able to better assess their effect on ageing and service life time as well as the potential health hazards and to derive guidelines for action. As part of this project, composite breathing air cylinders that had undergone different thermal ageing processes were systematically analysed with regard to their residual strength. as a second use case, lithium batteries used in radio devices were analysed with regard to the effect of critical temperatures above which thermal runaway of the batteries can occur. Critical temperature-time profiles were determined for these two important components, lithium batteries and composite breathing air cylinders, the effects for the user were analysed using suitable methods and the resulting hazards for the wearer were assessed. As a methodical approach, the actual temperature profiles previously determined by literature research were first verified in real tests and the laboratory loads were derived on this basis. In order to take into account the properties of composite breathing air cylinders made of fibre composites, sample groups were subjected to different thermal loads and examined with regard to their residual strength reduction and in comparison to thermally unloaded samples from two representative samples from different manufacturers. In addition to the static burst tests, combined ageing and residual strength tests were also carried out on cyclic loaded cylinders. The radio devices were subjected to both static and cyclic thermal loads with accompanying capacity measurements. The purpose of the static tests was to determine the maximum thermal load capacity of the batteries at which no failure occurs. In the cyclic tests, practical conditions were simulated as closely as possible in the laboratory. For this purpose, the batteries were repeatedly subjected to a load profile at a constant temperature and the residual capacity of the battery was measured after several intervals to determine the degradation. As a conclusion of the tests carried out on two representative types of breathing apparatus cylinders as part of this project, it can be concluded that the thermal loads have a sometimes significant influence on the residual strength of the breathing apparatus cylinders, depending on the type. Higher thermal exposure is clearly recognizable, at least on the breathing apparatus cylinders tested, and the cylinders can be easily remove and replaced by the responsible equipment maintainers. The thermal loads that occur during rescue operations were not critical for the tested breathing protection cylinders and the rescue teams. However, the many years of experience of established manufacturers should not be without influence here. There is therefore no reason to advise against the use of the lighter Type 4 breathing protection breathing apparatus cylinders if cylinders with visually recognizable thermal effects (color changes, material melting, etc.) are replaced immediately. The results on the radio devices showed that determination of the capacity can serve as a suitable criterion for the safety assessment for the batteries. The loss of capacity of the batteries as a result of the load also does not lead to a functional failure. The capacity determination can be used as a reliable and suitable criterion for the safety assessment of the batteries if the capacity measurement is carried out under constant conditions (same room temperatures, same measuring devices, etc.). It is recommended to replace the batteries when the remaining capacity is below 80%. A visual inspection of the radio devices can be carried out as a quick and very simple check. The radio devices used in the project showed deformation of the plastic casing when subjected to excessive loads. KW - Composite KW - Atemluftflaschen KW - Litiumbatterien KW - Funkgeräte KW - Thermische Belastung KW - Rettungskräfte KW - Feuerwehr KW - PSA KW - DGUV PY - 2024 UR - https://www.dguv.de/ifa/forschung/projektverzeichnis/ff-fp0462.jsp N1 - Abschlussbericht zum Vorhaben mit der Projekt-Nr. FF-FP 0462 (CoLiBri), Laufzeit 01.03.2021–29.02.2024, Bericht vom 15.04.2024 SP - 1 EP - 66 PB - Deutsche Gesetzliche Unfallversicherung (DGUV) CY - Berlin AN - OPUS4-59877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Naumann, Kathrin A1 - Tichter, Tim A1 - Nielsen, Rasmus S. A1 - Seger, Brian A1 - Hansen, Ole A1 - Chorkendorff, Ib A1 - Vesborg, Peter C. K. T1 - Protection Materials on III–V Semiconductors for Photoelectrochemical CO Reduction N2 - Tantalum oxide (TaOx) and amorphous titanium dioxide (TiO2) are employed as protection materials for commercial GaInP/GaAs/Ge triple-junction solar cells to facilitate the unbiased photoelectrochemical reduction of carbon monoxide on nanostructured copper particles. It has been found that a photoelectrode protected by a 150 nm-thick layer of TiO2, capped with 8 nm TaOx, and decorated with copper nanocubes in the size of 150 nm can successfully drive the photoelectrochemical conversion of carbon monoxide to ethylene. Implemented into a photoelectrochemical flow reactor, which continuously supplies the active interface with CO-saturated electrolyte, the device achieves a faradaic efficiency of 24% under AM1.5G conditions. Direct attachment of the copper nanocubes to a protection layer of TiO2 in the absence of TaOx results in a strong hydrogen evolution reaction (HER) and no CO reduction products are found. This unexpected loss in selectivity is studied via post-operando X-ray photoemission spectroscopy and ion-scattering spectroscopy. No modifications in the redox state of TiO2 orsigns of H intercalation are found, while the preferential redeposition of small Cu nanoparticles is considered possible. This increasein HER appears specific for TiO2, as additional, purely electroanalytical experiments using tantalum oxide or carbon as a support layer for Cu nanocubes can produce ethylene effectively. KW - Photoelectrochemistry KW - Carbon Monoxide Reduction KW - Protection Material KW - Multi‐junction KW - Copper Catalyst PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618712 DO - https://doi.org/10.1021/acs.jpcc.4c04782 SP - 1 EP - 10 PB - American Chemical Society (ACS) AN - OPUS4-61871 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Certification and approvals of dangerous goods packaging in Germany N2 - Germany and China cooperate in a GIZ project - initiated and supported by the BMDV - in comparing their systems of dangerous goods packagings. T2 - Sino-German Workshop on Dangerous Goods Packaging CY - Online meeting DA - 24.11.2023 KW - Dangerous goods packagings KW - Transport KW - ADR PY - 2023 AN - OPUS4-59276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prenner, Stefanie A1 - Part, Florian A1 - Jandric, Aleksander A1 - Bordes, Arnaud A1 - Leonhardt, Robert A1 - Jung-Waclik, Sabine A1 - Huber-Humer, Marion ED - Djebali, Ridha T1 - Enabling Circular Business Models: Preconditions and Key Performance Indicators for the Market Launch of Repurposed Second‐Life Lithium‐Ion Batteries From Electric Vehicles N2 - With the rise of electric vehicles (EVs) and thus lithium‐ion batteries (LIBs), the number of end‐of‐life (EoL) LIBs after their first life in EVs is about to increase significantly. These end‐of‐first‐life (EoFL) EV LIBs still have sufficient energy density for less‐demanding second‐life applications like stationary battery energy storage systems (BESSs) or mobile applications (e.g., forklifts, tools). Repurposing EoFL EV LIBs extends their lifespan, offering sustainability benefits and supporting several United Nations (UN) Sustainable Development Goals (SDGs). However, prevailing market entry barriers, such as high repurposing costs, little information on battery history and aging, or lacking performance indicators, hinder the widespread implementation of second‐life applications. Thus, this study aims to identify preconditions for considering and selecting useful EoFL LIBs and to determine key performance indicators (KPIs) to minimize economic risks for a successful second‐life market launch. KPIs were rated according to importance using a Likert scale, and reference values were introduced. A mixed‐methods approach, using expert interviews, an exploratory workshop, and an online survey, was applied. Twelve important preconditions were identified, with the “availability of information on battery specification” and “compliance with standards and regulations” considered very important. In addition, 12 KPIs were derived, covering six economic, three environmental, and three technical and safety‐related indicators. The KPIs “state of safety (SoS)” and “resource savings (Rsav)” were rated as highly important. Overall, the findings provide performance measurement guidance for repurposing companies, facilitating the market launch and adoption of second‐life applications. Future research can build on these results and investigate variations among different battery types, ultimately promoting a circular economy. KW - Lithium-Ion battery KW - Key performance indicators KW - Circular economy KW - Electric vehicle KW - Sustainability PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-619167 DO - https://doi.org/10.1155/er/8331870 SP - 1 EP - 19 PB - Wiley AN - OPUS4-61916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Rechtliche Grundlagen und Entwicklungen im Bereich des Transports von Lithiumbatterien N2 - Als zuständige Behörde im Bereich des Transports von Lithiumbatterien und Ressortforschungsanstalt ist die BAM sowohl an der Rechtsfortentwicklung beteiligt als auch an der hierfür benötigten Forschung. Aktuelle Themen, Forschungsprojekte und deren Ergebnisse werden vorgestellt. T2 - 1. Fachkonferenz Transport von Lithiumbatterien CY - Munich, Germany DA - 12.07.2024 KW - LIthiumbatterien PY - 2024 AN - OPUS4-62329 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Transport von defekten Lithiumbatterien: Umsetzungspraxis der neuen Rechtsvorschriften, Wo besteht Forschungsbedarf? N2 - Transport von defekten Lithiumbatterien - die BAM setzt die Vorschriften des internationalen Gefahrguttransportrechts für defekte Lithiumbatterien um. Um die Kompetenz hierfür sicherzustellen, bedarf es eigener Forschungstätigkeit. Auch im zuständigen UN Gremium werden Untersuchungen durchgeführt, an denen die BAM beteiligt ist. T2 - Fachkonferenz Lithiumbatterien CY - Göttingen, Germany DA - 22.01.2020 KW - Lithiumbatterien KW - Gefahrguttransport KW - ADR PY - 2020 AN - OPUS4-50806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prenner, Stefanie A1 - Part, Florian A1 - Jung-Waclik, Sabine A1 - Bordes, Arnaud A1 - Leonhardt, Robert A1 - Jandric, Aleksander A1 - Schmidt, Anita A1 - Huber-Humer, Marion T1 - Barriers and framework conditions for the market entry of second-life lithium-ion batteries from electric vehicles N2 - Transition to circular economy for lithium-ion batteries used in electric vehicles requires integrating multiple stages of the value cycle. However, strategies aimed at extending the lifetime of batteries are not yet sufficiently considered within the European battery industry, particularly regarding repurposing. Using second-life lithium-ion batteries (SLBs) before subsequent recycling can offer several advantages, such as the development of sustainable business models, the reduction of emissions, and alignment with UN Sustainable Development Goals 7, 12, and 13. Using expert and problem-centred interviews along with an exploratory workshop, this study guides stakeholders in the battery sector by illustrating the necessary changes for a more holistic circular economy. Moreover, an extended political, economic, social, technological, environmental, legal, and additionally safety-related (PESSTEL) analysis approach is carried out, which has not yet been used in this context. In this process, barriers, as well as necessary institutional framework conditions and organisational requirements for a successful market entry of SLB applications are investigated. Among others, key barriers relate to the competition with first-life applications and safety concerns. SLBs require high manual labour costs for repurposing, along with expenses for expired warranties and re-certifications. Ownership structures in traditional business models often result in SLBs and their corresponding usage data staying under the control of the manufacturers. Market viability, however, requires a level playing field for both first-life and second-life operators as well as circular battery and data-sharing business models. Gathering data on the ageing performance and performing improved safety testing according to test protocols facilitates the reliable assessment of SLBs. KW - Electric vehicle KW - Circular economy KW - Market entry barrier KW - Repurposing KW - Second-life lithium-ion battery KW - Second-life battery energy storage system PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614543 DO - https://doi.org/10.1016/j.heliyon.2024.e37423 VL - 10 IS - 18 SP - 1 EP - 15 PB - Elsevier Ltd. AN - OPUS4-61454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Caianiello, Carlo A1 - Tichter, Tim A1 - Arenas, Luis F. A1 - Wilhelm, René T1 - Toward Symmetric Organic Aqueous Flow Batteries: Triarylamine‐Based Bipolar Molecules and Their Characterization via an Extended Koutecký–Levich Analysis N2 - Symmetric organic flow batteries (SOFBs) can potentially address membrane crossover problems by employing bipolar redox‐active organic molecules (BROMs). Herein, a triarylamine (TAA) skeleton was chosen as a posolyte moiety for a new class of bipolar molecules for pH‐neutral aqueous flow batteries (FBs). Pyridinium and viologen derivatives were tethered to the posolyte moiety, and the new compounds were characterized. Cyclic voltammetry revealed that only viologen with a highly hydrophilic substituent, connected to the TAA moiety via a Zincke reaction, could be reversibly reduced. Varying the supporting electrolyte concentration on the selected derivative revealed water solubility as a challenge for further development. The selected derivative, MeO‐TPA‐Vi‐DMAE, was subjected to hydrodynamic voltammetry, and a modified Koutecký–Levich analysis was developed to investigate the observed potential‐dependent currents at the hydrodynamically dominated region, which are often seen with redox‐active organic molecules. This model discarded a purely Ohmic effect, showing a useful Levich slope at a certain overpotential before the onset of a secondary reaction. TAA‐based BROMs hold promise for pH‐neutral aqueous SOFBs, and the results will guide the design of new derivatives. The three‐term Koutecký–Levich relation here introduced will be useful not only to develop BROM‐based FBs but will most likely appeal to a much broader audience. KW - Redox Flow Batteries KW - Koutecký-Levich Analysis KW - Rotating Disc Electrode KW - Redox-active Bipolar Molecules KW - Electrode Kinetics PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-631476 DO - https://doi.org/10.1002/chem.202500815 SN - 1521-3765 SP - 1 EP - 15 PB - Wiley VHC-Verlag AN - OPUS4-63147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Umgang mit defekten Lithiumbatterien - Transport und Lagerung N2 - Während es umfangreiche Transportvorschriften für Lithiumbatterien und auch defekte Lithiumbatterien gibt, gibt es aktuell keine Lagervorschriften. Jedoch sind hier einige Aktivitäten und Ansätze zu verzeichnen, die ebenfalls vorgestellt werden. Ein Schwerpunkt liegt dabei auf e-bike Akkus. T2 - VdS-Fachtagung "Lithium-Batterien: Brand- und Arbeitsschutz" CY - Collogne, Germany DA - 17.09.21 KW - Lithium Batterien KW - Transport KW - Lagerung KW - E-bike Akkus PY - 2021 AN - OPUS4-54180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Thermal Investigations on Battery Safety N2 - The transportation and storage of lithium-ion batteries (LIB) — damaged or in an undefined state — is a major safety concern for regulatory institutions. Damaged LIBs pose the risk of a so-called thermal runaway (TR), a strongly exothermic reaction with the formation of gases, flames or even an explosion of the battery. The relevance of this issue is underlined by the number of fires that have occurred at recycling centers in the recent past. One solution to circumvent a TR is given by thermal passivation (i.e. deep-freezing) of batteries. Practically, this method is already used and temperatures below -60 °C are considered safe. In this talk, the parameter battery safety is revisited under the premise of heat-transfer and activation energies. At first, mechanically initiated TRs are compared for different cell chemistries, cell sizes, and temperatures, revealing that the threshold of thermal passivation is vastly system specific. Combining these results with differential scanning calorimetry underlines that the hazard potential of a battery is not necessarily eliminated by freezing the electrolyte. Instead, the potential for a TR needs to be regarded as a multivariant function of energy content, cell-voltage, chemical stability, and electrokinetic performance. Since the latter parameter is known to be vastly temperature-dependent, it is addressed in detail by a low-temperature electrokinetic study of different types of LIB. In this context, it is demonstrated that batteries are kinetically active even at temperatures well below the freezing point of the electrolyte and that their instantaneous power output is resembled sufficiently via Arrhenius´ law. To get a detailed understanding of cell-specific heat release during and prior to a TR, data from accelerated rate calorimetry will be discussed for various cell types at different state of charge and state of health. This will eventually provide a conclusive picture how a cell-internal TR-propagation takes place and which parameters need to be deliberately tuned under the premise of battery safety. T2 - 26. Kalorimetrietge CY - Leipzig, Germany DA - 11.06.2025 KW - Thermal passivation of batteries KW - Critically defective batteries KW - Differential scanning calorimetry KW - High-speed nail penetration KW - Accelerated rate calorimetry PY - 2025 AN - OPUS4-65058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Analytical solutions for the impedance of symmetrically distributed relaxation processes N2 - Distribution of relaxation times (DRT) analysis of impedance data is a powerful tool for unravelling entangled relaxation processes. However, reconstructing the DRT function from experimental data is an ill-posed inversion problem which suffers from noisy input and, hence, assigns a pseudo-signal to any kind of noise. To circumvent the resulting overfitting, different methods have been proposed, which are usually based on regularization. Alternatively, carefully selected distributed basis functions (e.g. Gauss-type, Cauchy-type, Matern-type) can be included in the algorithm of DRT reconstruction. This concept originates from the work of Cuicci and coworkers and has been implemented in their great software package DRT-tools. While this works exceptionally well for minimizing the demand on regularization, it must be kept in mind that the impedance of real-world relaxation processes of the constant phase element type is not represented by any of the resulting DRT functions. Bridging this gap was therefore the motivation for the present study. We derived analytical solutions for the impedance of several different types of distribution functions. The resulting impedances are compared with classical relaxation models and special features are pinpointed. The choice of an optimized basis function for reconstructing the DRT from experimentally acquired impedance data will improve electrochemical analysis in future work. Additionally, analytical solutions may be used for assigning a physical origin to the distributed behaviour in the impedance of certain types of electrodes. T2 - Bunsentagung CY - Leipzig, Germany DA - 17.03.2025 KW - Electrochemical Impedance Spectroscopy KW - Distribution of Relaxation Times KW - Cauchy Distribution KW - Gaussian Distribution KW - Cole-Cole Relaxation PY - 2025 AN - OPUS4-62894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharpmann, Philippa T1 - Tracing overdischarge-induced degradation in lithium-ion cells using cyclic voltammetry and differential voltage analysis N2 - Differential voltage analysis (DVA) and cyclic voltammetry (CV) are powerful electroanalytical techniques. While CV can be used to study the kinetics of electron transfer reactions [1], DVA can visualise phase transitions by correlating the opencircuit voltage and exchanged charge [2]. Recently, DVA receives an increasing attention in the battery community for characterising full-cell setups. In contrast, CV is less prominent for batteries, yet the prevalently used technique for ex-situ characterisations of novel electrode materials in half-cell configuration. In this study, we have investigated the overdischarge process of LiFePO4 pouch cells – which is usually presumed to result in a decomposition of the solid electrolyte interphase (SEI) and a corrosion of the copper current collector – in a complementary electrochemical analysis which uses both, CV and DVA in full-cell mode. For this purpose, CV consisting of three low sweep-rate scans and DVA of three low current rate cycles was performed. Degradation was traced by successive CV/DVA sequences during, pre- and post-overdischarge which allowed to pinpoint the features, the limitations, and similarities of both techniques. In this manner, we demonstrate that CV can successfully identify the dynamics of degradation processes, indicating that an irreversible side reaction starts at cell voltages below 0.55 V. For this reason, this study underlines that CV can be effectively used for spotting dynamic degradation mechanisms which are hardy seen in DVA. This may pave the way for further analysis which can be used for fingerprinting characteristic degradation. T2 - 124. Bunsentagung 2025 CY - Leipzig, Germany DA - 17.03.2025 KW - Differential Voltage Analysis KW - Cyclic Voltammetry KW - Batteries PY - 2025 AN - OPUS4-65055 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tichter, Tim A1 - Tichter, Alex A1 - Andrae, Dirk A1 - Roth, Christina T1 - Simulating cyclic voltammetry at rough electrodes by the digital-simulation–deconvolution–convolution algorithm N2 - The influence of electrode roughness on diffusional cyclic voltammetry (CV) is investigated from a theoretical perspective. For this purpose, the digital-simulation–deconvolution–convolution (DSDC) algorithm, initially developed for the simulation of CV at porous electrodes, is subjected to three substantial modifications. First, by employing adaptive numerical resolution and sample volumina, the computational demand of the digital simulation (DS) step is reduced significantly. Second, by modifying the Douglas–Gunn algorithm of the DS-step to operate on an arbitrarily incremented spatial grid perpendicular to the macroscopically planar electrode surface, the bulk of the fluid can be treated with an exponentially increasing spatial discretization which uses computational power even more efficiently. The third modification is an optimization of the computationally demanding deconvolution step which is used to extract the mass-transfer function from the data computed in the DS-step. This, initially recursive procedure, is replaced by a three-step sequence consisting of (I) a numerical Laplace transformation (NLT) on an exponentially expanding time-grid, (II) a Laplace-domain integration (LDI) and finally (III) a numerical inversion of Laplace transformation (NILT) using the Gaver–Stehfest (GS) inversion formula. Based on this novel strategy for CV simulation, the effects of electrode roughness are thoroughly investigated. It is demonstrated that for an ideally reversible reaction the effects of electrode roughness on the CV response are insignificant at common experimental timescales. In contrast, for scenarios with electrochemically quasi-reversible (or irreversible) kinetics, the apparent rate constants are allegedly upscaled by the area ratio 𝜓 = 𝐴rough∕𝐴planar . This manifests in a lower peak-to-peak separation without a distortion of the shape of the voltammetric profile. This behavior is finally explained in a quantitative manner in terms of convolution-sums and mass-transfer functions which ultimately puts the parameter electrode roughness into the semianalytical framework of convolutive modeling. KW - Rough electrodes KW - Electrode kinetics and Peak-to-Peak separation KW - Vanadium redox-flow batteries KW - Convolutive modeling KW - Digital-simulation KW - Numerical inversion of Laplace transformation KW - Gaver–Stehfest inversion formula PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614620 DO - https://doi.org/10.1016/j.electacta.2024.145175 VL - 508 SP - 1 EP - 17 PB - Elsevier B.V. AN - OPUS4-61462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharpmann, Philippa T1 - Exploring the effects of accelerated ageing on lithium- and sodium-ion cells N2 - Lithium-iron-phosphate (LFP) and sodium-ion batteries (SIBs) offer safe and cost-effective options for energy storage. In this study, the effects of continuous electrical stress, including high current loads and overdischarge, during cyclic ageing are investigated by tracing capacity loss and Coulombic efficiency during cycling of both cell types. Additionally, differential voltage analysis of pseudo open-circuit voltage discharges is utilised for degradation mode analysis. The results show that electrical stress accelerates degradation in both LFPs and SIBs, with high current rates potentially triggering plating or even cell failure in SIBs. Overdischarging primarily intensifies ageing by promoting accelerated solid electrolyte interphase growth. T2 - Doktorandenseminar der Technischen Universität Berlin CY - Berlin, Germany DA - 29.09.2025 KW - Lithium-ion -batteries KW - Sodium-ion-batteries KW - Electrical stress KW - Differential voltage analysis KW - Plating PY - 2025 AN - OPUS4-65057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scharpmann, Philippa T1 - Electrochemical characterisation of degradation mechanisms in lithium- and sodium-ion batteries during overdischarge N2 - Lithium-iron-phosphate (LFP) and sodium-ion batteries (SIBs) are promising technologies for energy storage systems due to their safe handling and cost-effectiveness. SIBs can be discharged to 0V without the safety concerns associated with lithium-ion batteries' copper current collector oxidation. However, overdischarging both types of batteries may decompose and subsequently rebuild the solid electrolyte interphase (SEI), leading to irreversible capacity loss and degradation. This study performs an in-situ analysis of the overdischarge process of LiFePO4 pouch and Na-ion cylindrical cells. Therefore, the cells are characterised for three low C-rate constant current or three slow-scan voltage cycles. While the voltage range of the manufacturer’s specifications is chosen for the first and third cycle, for the second cycle the minimum voltage is modified to 0.5V (LFP) and 0V (SIB), respectively. This enables tracing the degradation during the overdischarge, as well as through a comparison of the results pre- and post-overdischarging. For this purpose, the study employs two electrochemical characterisation techniques: differential voltage analysis (DVA) and cyclic voltammetry (CV). While cyclic voltammetry allows for the study of the kinetics of electron transfers [1], DVA enables the assessment of lithium distribution homogeneity and capacity degradation [2]. In both cells, the characterisation shows significant differences before and after overdischarging, indicating lasting changes through the decomposition and rebuilding of the SEI. This comparative study elucidates the overdischarge-induced degradation in sodium- and lithium-ion batteries, highlighting the utility of CV and DVA in analysing degradation mechanisms. T2 - Advanced Battery Power CY - Aachen, Germany DA - 02.04.2025 KW - Battery degradation KW - Overdischarge KW - Solid electrolyte interphase PY - 2025 AN - OPUS4-65056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neues Klassifizierungssystem N2 - Das neue Klassifizierungssystem für Lithiumbatterien nach Gefährlichkeit wird auch große Auswirkungen hinsichtlich der Verpackungsvorschriften haben. Worauf sich Hersteller und Anwender im Gefahrguttransport schon jetzt einstellen können, wird vorgestellt. Weiterhin werden hierzu die Forschungsergebnisse der BAM vorgestellt. T2 - BAM Erfa Verpackungen CY - Berlin, Germany DA - 17.09.2024 KW - Lithiumbatterien KW - Gefahrguttransport PY - 2024 AN - OPUS4-62333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien - Transport und Sicherheit N2 - Regularien und Anforderungen (zum Transport) von Lithiumbatterien. T2 - 6. Photovoltaik-Betriebs- und Sicherheitstagung CY - Berlin, Germany DA - 24.11.2022 KW - Lithiumbatterien KW - Regularien KW - Energiespeicher KW - Transport PY - 2022 AN - OPUS4-56744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neue Regeln - Klassifizierungsregeln: Was tut sich auf UN-Ebene? - TRGS 520: Es tut sich etwas auf nationaler Ebene N2 - Die Entwicklungen der Regelwerke auf nationaler und internationaler Ebene werden vorgestellt. Die BAM ist hier beteiligt und trägt mit zahlreichen Versuchsergebnissen bei, die hier erläutert werden. T2 - Fachkonferenz Lithiumbatterien CY - Göttingen, Germany DA - 23.01.2023 KW - Lithiumbatterien KW - Prüfung KW - Regelwerksentwicklung PY - 2023 AN - OPUS4-59275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Safety in transport of Li-ion batteries N2 - Safety in transport is the pre-requisite for bringing Lithium-ion batteries on the market. In order to consider the different types and degree of hazards, UN has set out to define a new classification system based on testing. BAM has participated in the test rounds and presents here the results. T2 - Technical Workshop on Advanced Materials Challenges and Standardisation Needs for Net Zero Technologies (AMCSNZT-2023) CY - New Delhi, India DA - 09.10.2023 KW - Lithium-ion batteries KW - Propagation testing KW - Safety PY - 2023 AN - OPUS4-59274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -