TY - JOUR A1 - Sauer, Hannah A1 - Okpeke, Bright E. A1 - Dzielendziak, Agnieszka S. A1 - Eberwein, Robert A1 - Baetcke, Lars A1 - Ehlers, Sören T1 - Comparative life cycle assessment of vacuum insulation panel core materials for liquid hydrogen storage tanks – glass bubbles compared to conventional core materials N2 - The environmental performance of insulation materials for liquid hydrogen storage tank application is important to the development of sustainable supply chains. As new materials keep evolving, there is a need to assess their environmental impact. Therefore, this study investigates the environmental sustainability and circularity of cryogenic insulation concepts, namely vacuum insulation panels (VIPs), exclusively focussing on their core materials. Employing a cradle-to-grave life cycle assessment model, the VIP core materials are investigated with a special focus on glass bubbles. Based on the results, the global warming potential of the considered core materials, namely, glass bubbles, silica aerogel, fumed silica, expanded perlite, glass fibre, and polyurethane foam is 9.21∗10^−2, 7.00, 2.50∗10^−1, 3.63∗10^−2, 6.68∗10^−2, and 1.88 kg CO2 eq. per functional unit, respectively. In general, silica aerogel and polyurethane foam are the least environmentally friendly materials, while the most sustainable is expanded perlite, followed by glass fibre, glass bubbles, and fumed silica. KW - LH2 KW - Insulation KW - Cryogenic storage tank KW - Life Cycle Assessment PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655445 DO - https://doi.org/10.1016/j.ijhydene.2026.153937 SN - 0360-3199 VL - 219 SP - 1 EP - 11 PB - Elsevier Ltd. AN - OPUS4-65544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon T1 - Between Homogenous and Heterogenous Catalysis: Single-Atom-Catalysts N2 - Catalysis is a very important process in chemistry as it lowers the energy barrier for chemical reactions. This saves energy and/or some reactions are only possible with a catalyst under the desired conditions (temperature and pressure). Catalysts can be roughly categorized depending on the phase they interact with the substrates in heterougenous and heterogenous catalyst T2 - RÅC international summer school CY - Varberg, Sweden DA - 14.08.2022 KW - Single-atom-catalyst KW - Electrochemistry KW - Porous carbons PY - 2022 AN - OPUS4-61983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon T1 - XAS for structural characterization of atomically dispersed materials N2 - metal and nitrogen enriched carbons (M-N-C) are promising electrocatalysts for small molecule activation. It is proposed that the nitrogen is forming a stabilizing N4-site for the catalytically active metal. This can be proven by XAS measurements to confirm the coordination sphere around the metal. T2 - Bessy User Meeting CY - Online meeting DA - 08.12.2024 KW - Single-atom-catalyst KW - Structural characterization KW - Porous carbons PY - 2022 AN - OPUS4-61994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Holistic Experimentation in the HExX-Lab N2 - Through bottom-up, comprehensive digitalisation of all aspects of an experiment, the HEX-lab improves the trustworthiness (traceability, reproducibility, quality) of scientific findings. The five main parts that make up a materials science experiment, i.e. Sample preparation, Measurements, Processing, Analysis, and Interpretation, each have been addressed in thorough and unique ways in this lab, building up a foundation for a wide range of materials science collaborations. Improvements span the spectrum. Hardware developments include new sample environments and stages, such as grazing incidence motion towers, electrochemistry cells and flow-through holders, electronic components such as safety interlocks and multipurpose I/O controllers, and liquid handling systems such as coolant flow cross-over systems. Software developments include: 1) a new comprehensive control system operating on both the RoWaN as well as the MOUSE allowing for full Python control and sequencing of all experimentation, 2) Automated scripts for instrument optimization, sample alignments and measurements, 3) revamped data pipelines and analysis software, standalone or launched as part of operations sequencing dashboards on servers, and 4) meticulously structured archival datafiles, fully documenting sample preparation, measurements, processing and analyses. These allow for holistic databases and dashboards to be constructed to investigate the links between synthesis parameters and resulting morphology. This poster will highlight some of the tools and techniques developed and available in the HEX-lab over the years, from sample environments to overarching experiment and data organisation structures. T2 - Materials Science Core Facility Synergy Forum 2025 CY - Bremen, Germany DA - 26.02.2025 KW - Digitalization KW - Holistic experiments KW - Traceability KW - Data provenance PY - 2025 AN - OPUS4-62675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias T1 - Großbrandversuche von Elektrofahrzeugen zum Transport Gefährlicher Güter N2 - Der zunehmende Einsatz von batterieelektrischen Transportfahrzeugen (Battery Electric Transport Vehicles – BETVs) im Verkehrswesen wirft Sicherheitsfragen beim Transport gefährlicher Güter auf. Obwohl Batteriebrände auf Zell-, Modul- und Fahrzeugebene umfassend untersucht wurden, fehlen systematische Daten zu deren thermischen Auswirkungen auf Gefahrgutverpackungen. Um diese Lücke zu schließen, führt die Bundesanstalt für Materialforschung und -prüfung (BAM) auf ihrem Testgelände Technische Sicherheit (BAM-TTS) groß angelegte Brandtests durch, in denen konservative Unfallszenarien mit unterschiedlichen Zellchemien und -kapazitäten nachgestellt werden. Die Tests kombinieren fahrzeugbedingte Brandlasten mit standardisierten Propan-Referenzbränden und erfassen mittels hochauflösender Instrumente zentrale Messgrößen wie Wärmefluss, Temperatur und Strahlung. Der daraus entstehende Datensatz liefert erstmals eine direkte Quantifizierung der thermischen Auswirkungen von BETV-Bränden auf Verpackungen und unterstützt Expertengremien bei der Bewertung, ob bestehende regulatorische Anforderungen für alternative Antriebssysteme weiterhin angemessen sind. T2 - Informationsaustausch zur verkehrsrechtlichen Aufsicht bei der Beförderung radioaktiver Stoffe CY - Salzgitter, Germany DA - 03.02.2026 KW - Batteriebrand KW - IAEA KW - Gefahrgut KW - Transport PY - 2026 AN - OPUS4-65626 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Shu-Han T1 - MOF-derived Synthetic Carbon Anode Materials for Sodium-Ion Batteries N2 - Metal-organic frameworks (MOFs), particularly the zeolitic imidazolate framework (ZIF) family, are attractive precursors for advanced energy-storage materials. Upon pyrolysis, ZIFs can be transformed into electrically conductive carbon materials while preserving their original particle morphology, which is crucial for achieving high-performance sodium-ion battery anodes. Despite these advantages, large-scale implementation remains challenging due to the need for synthesis routes that balance performance, cost, and sustainability. The present study addresses these challenges by developing environmentally benign and economically feasible strategies for the scalable production of ZIF-8-derived carbon anodes suitable for industrial applications. T2 - Batterieforum Deutschland 2026 CY - Berlin, Germany DA - 20.01.2026 KW - Sodium-ion battery KW - Negative electrode KW - Metalorganic frameworks PY - 2026 AN - OPUS4-65644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Petitdemange, Eliot A1 - Zhu, Jinjie A1 - Pedersen, Angus A1 - Parker, Joseph A1 - Balaghi, Esmael A1 - Li, Shaohua A1 - Favero, Silvia A1 - Ignacio Martínez, José A1 - Haigh, Sarah A1 - Titirici, Maria-Magdalena A1 - Fischer, Anna A1 - Barrio, Jesús T1 - High-Yield Synthesis of Fe-NC Electrocatalysts Using Mg2+ Templating and Schiff-Base Porous Organic Polymers N2 - The decoupled synthesis of Fe-NC single-site electrocatalysts mediated by Lewis acids enables high active site density and utilization. However, current approaches often rely on small organic molecules and suffer from low synthesis yields due to the high Lewis acid-to-precursor ratios required to achieve highly porous carbons. Here, a porous organic polymer (POP) based on 2,4,6-Triaminopyrimidine (TAP) is utilized as a carbon-nitrogen-based scaffold for the synthesis of Fe─NC electrocatalysts. By tuning the amounts of MgCl2 ·6H2O used both as porogen and active site templating agent, synthetic yields exceeding 45% are achieved, a significant improvement compared to the 6% yield from the molecular analogue and the highest reported forMg2+ templated systems. Subsequent low-temperature exchange with Fe leads to atomically dispersed FeNx, minimizing Fe aggregation. The resulting materials exhibit high specific surface areas (>1000 m2 g−1) with micro-, meso-, and macropores, which promote mass transport and active site accessibility. Compared to Fe─NC synthesized via direct pyrolysis of Fe-coordinated POP, the decoupled method enables significantly higher catalytic activity in both alkaline and acidic media, and delivers 1 A cm−2 at 0.687 ± 0.004 VRHE in an alkaline gas diffusion electrode, highlighting its potential for practical oxygen reduction devices. KW - Porous Organic Polymers KW - Single Atom KW - Oxygen reduction PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652618 DO - https://doi.org/10.1002/adfm.202518944 SN - 1616-3028 SP - 1 EP - 15 PB - Wiley-VCH GmbH AN - OPUS4-65261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hickel, Tilmann A1 - Waske, Anja A1 - Tehranchi, Ali A1 - Bhattacharya, Biswajit A1 - Stawski, Tomasz M. A1 - Fellinger, Tim-Patrick A1 - Mehmood, Asad A1 - Witt, Julia A1 - Ozcan, Ozlem A1 - Guilherme Buzanich, Ana A1 - Kumar, Sourabh A1 - Mishra, Rajesh Kumar A1 - Holzer, Marco A1 - Stucchi de Camargo, Andrea Simone A1 - Agudo Jácome, Leonardo A1 - Manzoni, Anna A1 - Fantin, Andrea A1 - John, Elisabeth A1 - Hodoroaba, Vasile-Dan A1 - Bührig, Sophia A1 - Murugan, Jegatheesan A1 - Marschall, Niklas A1 - George, Janine A1 - Darvishi Kamachali, Reza A1 - Maaß, Robert A1 - Emmerling, Franziska T1 - Chemically complex materials enable sustainable high-performance materials N2 - Chemically complex materials (CCMats) 􀀀 including high-entropy alloys, oxides, and related multi-principal element systems 􀀀 offer a paradigm shift in materials design by leveraging chemical diversity to simultaneously optimize functional, structural, and sustainability criteria. The vastness of the compositional and structural space in CCMats propels the field into an expanding exploratory state. To reconcile functional and structural performance across this immense parameter space remains an open challenge. This Perspective evaluates the opportunities and challenges associated with harnessing chemical complexity across a broad spectrum of applications, such as hydrogen storage, ionic conductors, catalysis, magnetics, dielectrics, semiconductors, optical materials, and multifunctional structural systems. It is delineated how three central design strategies: targeted substitution (SUB), defect engineering (DEF), and diversity management (DIV) enable the reconciliation of high functional performance with long-term structural stability and environmental responsibility. Advances in computational thermodynamics, microstructure simulations, machine learning, and multimodal characterization are accelerating the exploration and optimization of CCMats, while robust data infrastructures and automated synthesis workflows are emerging as essential tools for navigating their complex compositional space. By fostering cross-disciplinary knowledge transfer and embracing data-driven design, CCMats are poised to deliver next-generation materials solutions that address urgent technological, energy, and environmental demands. KW - Chemically complex materials KW - Structural stability KW - Functional performance KW - Design strategies KW - Sustainability PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655598 UR - https://www.sciencedirect.com/science/article/pii/S1359028626000033?via%3Dihub DO - https://doi.org/10.1016/j.cossms.2026.101256 SN - 1359-0286 VL - 42 SP - 1 EP - 26 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-65559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid (HNO3) on HDPE jerrycans – comparison of outdoor and lab test N2 - A damaging action of HNO3-55% only occurs in combination with its decomposition into nitrous gases, which can be caused by UV radiation. In a laboratory test, transparent HDPE jerrycans have been exposed to both UV radiation and 55 wt-% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The respective damages are compared with FTIR spectroscopy in ATR and HT-gel permeation chromatography (GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. The gradual increase in oxidative damage shows the good reproducibility of the lab exposure. The decomposition of nitric acid into nitrous gases by UV radiation – as well as the jerrycan oxidation – is also observed at lower HNO3 concentration (28 wt- %). Similar results are obtained after outdoor tests. Again, the damage occurs only after combined exposure, in contrast to the exposures to UV only and to HNO3 only, which were conducted in parallel. Outdoor exposures are most readily accepted as they represent possible end-use conditions. However, the reproducibility of these exposures is poor due to the large temporal variations in weather. There are also several safety risks, which is why the number of replicates remains limited. Since the outdoor and lab exposure tests show the same qualitative results, it is appropriate to conduct systematic studies in the laboratory. After 6 days of lab exposure, the oxidation damage is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. It should be noted that this amount can also occur in two sunny weeks. T2 - 24th iapri World Packaging Conference CY - Valencia, Spain DA - 17.06.2024 KW - Ppolyethylene KW - UV exposure KW - Nitric acid KW - Oxidation PY - 2024 VL - 2 SP - 30 EP - 37 PB - ITENE AN - OPUS4-60414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon A1 - Mehmood, Asad A1 - de Oliveira Guilherme Buzanich, Ana A1 - Emmerling, Franziska A1 - Fellinger, Tim-Patrick A1 - Thomas, A. T1 - Characterization of Solid-State Complexes by XAS N2 - Atomically dispersed metal-nitrogen doped carbons (M-N-C) are promising catalysts for the activation of small molecules such as O2 and CO2. These single atom catalysts (SAC) operate at the interface between homogenous and heterogenous catalysts. Currently, many examples of M-N-C are known with good oxygen reduction reaction activity but lacking a controlled synthesis of the specific active sites of the precatalyst. Recently, our group facilitated the synthesis of pure pyrrolic M-N4 sites using Zn ions as imprinters.[1] These amorphous materials obtained by active site imprinting method are characterized at the BAMline (Bessy II) by X-ray absorption spectroscopy (XAS). In-situ/operando measurements will be crucial in future work for a better understanding of the dynamic changes of the active site. T2 - InSynX Workshop 2023 CY - Sao Paulo, Brazil DA - 06.03.2023 KW - Solid-State Complexes PY - 2023 AN - OPUS4-58933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scholl, Juliane A1 - Scharpmann, Philippa A1 - Bagheri, Abbas A1 - Lisec, Jan A1 - Meiers, Emelie A1 - Jaeger, Carsten A1 - Leonhardt, Robert A1 - Haase, Hajo A1 - Koch, Matthias T1 - Beyond the lab: Real-world composition of commercial Li-ion battery electrolytes N2 - This study presents a systematic, characterization of electrolytes from commercial lithium-ion batteries (LIB), encompassing 90 batteries from leading global manufacturers across diverse formats and application sectors. An integrated, complementary mass spectrometric workflow combining LC–MS/MS, GC–MS, and high-resolution MS was employed. To ensure robust structural annotation, molecular identifications were assigned confidence levels following Schymanski et al. (2014). Across all formats, PF6− was confirmed as the dominant Li+ counterion, frequently coexisting with BF4−, PO2F2−, and bis(fluorosulfonyl)imide (FSI−), forming binary and ternary salt systems optimized for both conductivity and safety. Solvent systems revealed the widespread use of propylene carbonate (PC) combined with diverse carbonate mixtures, demonstrating trends in performance optimization specific to cell format. A variety of additives were identified, reflecting a clear shift towards multifunctional, synergistic additive packages and the gradual replacement of fluorinated species with environmentally safer alternatives. Cycling studies demonstrated that electrolyte degradation mechanisms are strongly influenced by electrode composition and additive chemistry, with oxidative degradation pathways dominating. Together, these findings provide rare empirical insight into the evolving formulation strategies of electrolytes in commercial LIB, still employing classic carbonates and LiPF6, but highlighting a trend toward safer, more robust, and sustainable electrolyte architectures by using synergistic multifunctional systems. KW - Mass Spectrometry KW - Lithium-ion batteries KW - Electrolyte degradation PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656254 DO - https://doi.org/10.1016/j.jpowsour.2026.239739 SN - 0378-7753 VL - 673 SP - 1 EP - 13 PB - Elsevier B.V. AN - OPUS4-65625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werner, Jan A1 - Böttcher, Nils A1 - Soderer, Hannes T1 - Batterieelektrisch betriebene FL/AT-Fzg.-Vorschriften und Sicherheit N2 - Überblick über Vorschriftenlage, Technik der Batterien und aktuelle Forschung. Aufzeigen bestehender Unschärfen in der Rechtslage, Sicherheitsfragestellungen zu Batterietechnik sowie Interaktion mit Gefahrgut. T2 - E-Mobilität in der Chemielogistik CY - Duisburg, Germany DA - 04.03.2026 KW - Batterieelektrische Antriebe KW - Gefahrgut KW - ADR KW - Unfallfeuer KW - Wärmeübertragung KW - Lithium Ionen Batterien PY - 2026 AN - OPUS4-65663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Kick-off LiBaTra - WP4: Safety Tests N2 - Die BAM ist Projektpartner im vom BMWE geförderten Verbundvorhaben LiBaTra („Lithium-Ionen-Batterie Transport und sichere Deaktivierung für das Recycling“). Weitere Projektpartner neben der BAM sind die Universität Braunschweig mit dem iPAT (Institut für Partikeltechnik) sowie die Firmen Siemens Energy SE sowie No Canary. Die BAM bearbeitet das Teilvorhaben „Risikobestimmung tiefenentladener Energiespeicher“ (FKZ: 03EI6145A-D). Die Präsentation gibt die wesentlichen Arbeitsinhalte des Teilvorhabens der BAM wieder. T2 - Kick-off Meeting des Verbundvorhabens LiBaTra CY - Online meeting DA - 17.02.2026 KW - Auswirkungsbetrachtungen KW - Elektrische Energiespeicher KW - Lithium-Ionen-Batterie KW - Stationäre Energiespeicher KW - Thermisches Durchgehen PY - 2026 AN - OPUS4-65657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid on high‐density polyethylene containers as a laboratory test N2 - In a laboratory test, transparent high‐density polyethylene (HDPE) jerrycans have been exposed to both UV radiation and 55 wt‐% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The damages are compared with FTIR spectroscopy in ATR and HT‐gel permeation chromatography(GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. This is caused by the decomposition of nitric acid into nitrous gases by UV radiation, which is also observed at lower concentrations (28 wt‐%). After 6 days of laboratory exposure, this is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. The gradual increase in oxidative damage shows the reproducibility of the test. KW - Molecular mass distribution KW - High-density polyethylene KW - Nitric acid KW - UV radiation PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550141 DO - https://doi.org/10.1002/pts.2673 SN - 0894-3214 VL - 35 IS - 10 SP - 729 EP - 735 PB - Wiley CY - New York, NY AN - OPUS4-55014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ammerman, D. J. A1 - Bignell, J. L. A1 - Bjorkman, G. S. A1 - Breach, M. R. A1 - Broz, V. A. A1 - Jordan, J. A1 - Kuehner, S. A1 - Molitoris, D. P. A1 - Reinhardt, W. A1 - Rigato, A. B. A1 - Rosvall, E. S. A1 - Sakalaukus Jr., P. J. A1 - Shih, P. Y.-K. A1 - Siromani, D. A1 - Snow, S. D. A1 - Tso, C.-F. A1 - Yaksh, M. C. A1 - Zencker, Uwe A1 - Zhang, X. T1 - Guidance document - Use of explicit finite element analysis for the evaluation of radioactive material transport packages and storge casks in energy-limited impact events N2 - The purpose of this document is to provide guidance for developing quality finite element models to ensure, with reasonable certainty, that the model produces accurate results for comparison with the strain-based or stress-based acceptance criteria of Section III, Division 3 of the ASME Boiler and Pressure Vessel Code, but could be applicable to other Sections of the Code or other codes. Models developed following the guidance provided in this document meet the definition of a "Quality Model," as described in Paragraph EE 1240 of the Nonmandatory Appendix EE (Strain-Based Acceptance Criteria Definitions and Background Information). It cannot be emphasized enough, however, that the guidance supplied here does not constitute requirements. Rather, the intent of the guidance is to give practical direction to analysts (i.e., this is not a set of regulatory requirements). This guidance document is an "evolving" document. It will undergo revision as computing capability and FEA techniques progress, and as example problems are developed. KW - Computational modeling KW - Explicit dynamics PY - 2025 SN - 978-0-7918-7749-4 VL - NTB-6 SP - 1 EP - 153 PB - Americal Society of Mechanical Engineers (ASME) CY - New York, NY ET - 2025 AN - OPUS4-65759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pedersen, Angus A1 - Zhu, Jinjie A1 - Barrio, Jesús A1 - Parker, Joseph A1 - Hunter, Robert D. A1 - Haigh, Sarah J. A1 - Fellinger, Tim-Patrick A1 - Stephens, Ifan E. L. A1 - Titirici, Maria-Magdalena T1 - Contribution of Mg-templated porosity to activity and durability in Fe–N–C O 2 reduction catalysts N2 - Atomically dispersed Fe in N-doped carbon (Fe–N–C) catalysts are leading platinum-group-metal-free candidates for the O2 reduction reaction in proton exchange membrane fuel cells (PEMFCs). Zeolitic imidazolate framework (ZIF-8) derived Fe–N–C present the most promising performance; however, they possess a narrow distribution of small micropores, which limits active site accessibility. Here, to induce hierarchical porosity in Fe–N–C, we report a systematic study on MgCl2·6H2O-templated ZIF-8-derived Fe–N–C catalysts for the O2 reduction reaction. MgCl2·6H2O addition induced complete Zn removal, collapse of the ZIF-8 framework, and formation of large micro- and mesopores, with graphene-like structures. N content was markedly reduced, with conversion from pyridinic to pyrrolic N species. Rotating disc electrode tests showed a progressive increase in O2 reduction activity with MgCl2·6H2O, which is strongly correlated (R2 = 0.98) to the formation of large micropores and small mesopores (1–4 nm). This introduces an indirect structure–activity design principle for Fe–N–Cs. The enhanced Fe–N–C porosity also leads to increased degradation rates under accelerated stress test conditions, which we attributed to the oxidation of disordered carbon domains and active Fe loss. This study highlights a key trade-off between porosity-driven O2 reduction activity and durability in Fe–N–C catalysts. KW - Porosity KW - Single atom KW - Oxygen reduction PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657549 DO - https://doi.org/10.1039/d5ma01488c SN - 2633-5409 SP - 1 EP - 8 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaeger, Carsten T1 - Untargeted Analysis of Leachables Released from Recycled Polyethylene Canisters N2 - Recycling existing materials and products as far as possible is an integral part of the circular economy. Plastic-based packaging, including containers for food and beverages but also for storing and transporting chemicals and dangerous goods, are presently made to a wide range from fossil resources. However, even for these “contact sensitive” products, there is still the aim of sustainability using recycled materials. For packings for the transport of dangerous goods, safety characteristics of the containments made from the “virgin” materials including polyethylene (PE) are well known and tested within the frame of their design type approval. Much less, however, is known about their counterparts made from recycled materials. Apart from material weaking, incorporation of residues into recycled plastics can cause contamination of the goods inside the packaging. To fill this gap, we have evaluated high-density PE (HDPE) canisters made from post-consumer waste towards release of plastic additives and contaminants such as residues from former contents. Using a comprehensive untargeted high-resolution mass spectrometry (HRMS) approach as well as thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC/MS), we detected up to 870 distinct components depending on the type of stored chemical and storage duration. Most of the components were unique to or released in significantly higher amounts from recycled HDPE compared to conventional HDPE. 129 of the components could be identified and analyzed for functional use. The analysis revealed “cosmetics”, “fragrance” and “flavoring” as major associations next to known and expected uses in the field of “plastics”, indicating significant introduction of foreign contaminants into the product. We present details on the compound classes involved and discuss consequences for political targets on increasing recycling rates in this product segment. T2 - International Conference on Non-Target Screening CY - Erding, Germany DA - 13.10.2025 KW - Extractables KW - Leachables KW - Untargeted analysis KW - Recycling KW - Polyethylene PY - 2025 AN - OPUS4-65742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -