TY - CONF A1 - Schlick-Hasper, Eva T1 - Ablauf des Zustimmungsverfahrens zu alternativen Methoden zum Wasserbad in der BAM N2 - Dieser Vortrag gibt einen Überblick über den Ablauf zur Zustimmung alternativer Methoden der Dichtheitsprüfung für gefüllte Druckgaspackungen nach ADR 6.2.6.3.2. T2 - IGA-Herbstforum CY - Frankfurt am Main, Germany DA - 24.11.2023 KW - Druckgaspackungen KW - Zustimmung KW - Alternative Dichtheitsprüfverfahren PY - 2023 AN - OPUS4-59032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Container requirements for high-level radioactive waste disposal in rock salt, claystone, and crystalline rock – Outcomes of the research project KoBrA N2 - Suitable containers for receiving high-level radioactive waste are a key elements of every repository system concerning different host rocks like rock salt, claystone and crystalline rock as being considered in Germany. The disposal container design is decisive regarding boundary conditions for the transport, emplacement techniques, and the operational and long-term safety assessment. The systematic derivation of the requirements to be placed on disposal containers forms the basis for a targeted, comprehensible and transparent development of containers that meet the requirements. The presentation summarizes the outcomes of the research project KoBrA. T2 - IGD-TP Symposium CY - Zurich, Switzerland DA - 20.09.2022 KW - Disposal KW - Container KW - Radioactive waste KW - Safety PY - 2022 AN - OPUS4-57021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Transport nach Zwischenlagerung, Besonderheiten des letzten Transports N2 - Transportierbarkeit von Transport- und Lagerbehältern für radioaktive Stoffe, welche nach eine längerfristigen trockenen Zwischenlagerung transportiert werden müssen. Überblick über die aktuellen Regelwerke und Richtlinien sowie die Zeitpläne für das Finden eines Endlagers für hochradioaktive Stoffe und die damit verbundene verlängerte Zwischenlagerung. Des Weiteren werden das für die verlängerte Zwischenlagerung notwendige Alterungsmanagement und die noch erforderlichen Forschungstätigkeiten vorgestellt. T2 - BGZ Fachworkshop Zwischenlagerung CY - Berlin, Germany DA - 16.11.2021 KW - Transportbehälter KW - Radioaktive Stoffe KW - Transport KW - Zwischenlagerung KW - IAEA PY - 2021 AN - OPUS4-60505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Verkehrsrechtliche Betrachtungen Transport- und Lagerbehälter - Wo geht die Reise hin? N2 - Transportierbarkeit von Transport- und Lagerbehältern für radioaktive Stoffe, welche nach eine längerfristigen trockenen Zwischenlagerung transportiert werden müssen. Überblick über die aktuellen Regelwerke und Richtlinien sowie die Zeitpläne für das Finden eines Endlagers für hochradioaktive Stoffe und die damit verbundene verlängerte Zwischenlagerung. Des Weiteren werden das für die verlängerte Zwischenlagerung notwendige Alterungsmanagement und die noch erforderlichen Forschungstätigkeiten vorgestellt. T2 - 10. Symposium Lagerung und Transport radioaktiver Stoffe CY - Hannover, Germany DA - 05.09.2023 KW - Transportbehälter KW - Radioaktive Stoffe KW - Transport KW - Zwischenlagerung KW - IAEA PY - 2023 AN - OPUS4-60506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias T1 - Safety Aspects for Transport Containers with regard to Ageing and Battery Accident Scenarios N2 - In Germany, the search for a final repository for highly radioactive material is currently based on the assumption that interim storage will take considerably longer than was anticipated. At that time, authorization procedures assumed that interim storage would be brief, until the containment systems could be placed in a final repository. For today's new approvals and extensions, the IAEA (International Atomic Energy Agency) regulations for the transport of radioactive material require an assessment of all components and component groups with regard to ageing. To assess the safety requirements not only over the previously envisaged periods but also over long durations, numerous individual parts and component groups must be examined and evaluated for ageing and interactions between materials. The metal seals of a double lid sealing system, for example, are critical components that must be studied with respect to ageing. In a containment system for radioactive material, metal seals must not only undergo classic ageing, but also withstand mechanical influences and radiation over extended periods. In addition to assessments by the applicants, BAM must also independently analyze and evaluate these ageing mechanisms as part of its sovereign mandate. Another challenge in both new approvals and extensions is the assessment of transport regarding changes in the state of the art, which are not synchronously assessed in the regulations. In transporting radioactive material, a classic oil fire has been assumed in a hypothetical accident scenario from the development of the regulations to the present day. Due to the rapid development of propulsion technologies in recent years, such as battery or hydrogen-powered vehicles, investigations must be conducted in the revision process of the IAEA regulations to assess the impact of these new technologies on safety assessments. It is important for the member states of the IAEA to know whether new technologies are covered by the regulations or if changes are necessary to continue issuing international licenses. By focusing on batteries from the material to the cell to the module and the application, BAM contributes to the evaluation of batteries at every step of the chain. In addition to the safety of current and new battery technologies, BAM also endeavors to address issues of compositional trace and sustainable energy materials. T2 - MSD: Leaf CY - Livermore, CA , USA DA - 07.08.2024 KW - Safety Aspects KW - Ageing KW - Accident Scenarios KW - Battery PY - 2024 AN - OPUS4-60851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werner, Jan T1 - Requirements for loading compartments for EX/III vehicles N2 - The current explosives protection requirements of the ADR regulations are based on an outdated state of the art. The lack of clarity leads to uncertainties with existential risks and costs for equipment suppliers and operators of dangerous goods vehicles. In order to promote a revision of the supplementary regulations for EX/III vehicles for the transportation of explosive substances and articles of Class 1 in packages, it is therefore necessary to examine the hazards to which explosive substances and articles are exposed during transportation. To this end, existing design solutions will be examined on the basis of current regulations and their effectiveness against a typical external heat load will be determined. The first step is to characterize the heat input by means of calorimeter tests with typical accident loads. Idealized load scenarios are then to be derived from this, which are to be regarded as a prerequisite for standardization work. In the final step, a draft text for the renewal of the existing ADR regulations is to be drawn up and then coordinated internationally. T2 - UNECE Working Party on Transport of Dangerous Goods By Road WP.15 CY - Geneva, Switzerland DA - 05.11.2024 KW - EX/III KW - Dangerous Goods KW - ADR KW - Transport KW - Fire PY - 2024 AN - OPUS4-61640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - On the structure of doped carbon electrodes N2 - Carbon-based materials are promising electrodes for energy applications. Herein an overview of morphological and chemical features of such carbon materials is given. It is further shown how morphological and chemical features must be devonvoluted to be able to elucidate structure-performance realtionships that are critical to the improvement of the materials for applications such as batteries or fuel cells. T2 - TEC Summer Seminar 2022 CY - Monte Isola, Italy DA - 06.09.2022 KW - Carbon KW - M-N-C KW - Electrocatalysis KW - Energy storage PY - 2022 AN - OPUS4-61935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Metal chloride activation revisited: a sol-gel process to functional carbons N2 - Porous carbon materials are known for their applicability in important areas such as sorption, catalysis and electrochemistry (e.g. fuel cell catalysts, supercapacitor or battery electrodes). It was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR), with the potential to reach performances of practical need one day. A key strategy towards improvement for this aim comprises the generation of advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. My group is developing novel sol-gel type strategies that are using molten salts or molten acids as unconventional reaction medium for the porogenesis in doped carbons, thereby revisiting classic activation techniques.[1,2] Carbon materials with extra high surface area of ~2800 m2 g-1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained.[3] It turns out that the meso- and macrostructure is generated by means of phase separation rather than leaching reactions. However, chemical reactions between the carbon precursor and the melt are also involved. The salt cations Mg2+ and Zn2+ act as template ions, which results in metal coordination sites, embedded into the carbon structure.[4,5] The imprinted structure may be utilized as catalytically active site by performing ion-exchange reactions. The novel preparation strategy towards highly active electrocatalysts will be presented for Mg and Zn and further discussed for lighter elements. T2 - Carbon Chemistry and Materials Conference 2022 CY - Rome, Italy DA - 10.10.2024 KW - Activated carbon KW - Salt templating PY - 2022 AN - OPUS4-61936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Structure-Performance Relations of PGM-free Electrocatalysts for PEM Fuel Cells N2 - Proton-exchange membrane fuel cells are amongst the most promising energy conversion technologies today. Herein non-precious iron-coordinated nitrogen doped carbons (Fe-N-Cs) as well as metal-free nitrogen-doped carbons (NDCs) are very promising alternatives for Pt-based cathode catalysts. The early reports on the application of such materials date back to the 1960´s when Jasinski demonstrated that - similar to natural porphyrins - N-coordinated transition metal complexes can be active sites for the ORR.1 The preparation of Fe-N-Cs was strongly optimized over the years; still they typically remain with harsh reaction conditions that complicate the selective formation of active FeN4 sites. Until recently, the employment of pyrolytic temperatures was a dogma for the synthesis of FeN4 sites, however coming with unfavorable side reactions. To avoid those harmful side reaction a limit of maximum ≈3 wt.% of Fe (depending on the precursor) was reached, which was also limiting the progress in catalyst performance for this class of materials.2, 3 Since 2006 it was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR).4 Both, NDCs and Fe-N-Cs nowadays show the potential to reach performances of practical need, where NDC seem to be promising only for alkaline conditions, while Fe-N-Cs show promise independent of the pH.5, 6 For both PGM-free catalysts, high performance requires advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. Results and Discussion My group is developing novel synthetic strategies e.g. using molten salts or molten acids as unconventional reaction medium for the preparation of carbons materials.7, 8 Carbon materials with tunable very high surface area of ~2800 m2 g-1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained. Fig. 1: Scheme of the porogenesis mechanism for NDCs by phase separation in of molten salt carbonization (a) to obtain tunable high surface area and porous carbon materials with varying nitrogen content (b). It turned out that such NDCs synthesized in presence of Mg2+ or Zn2+ give rise to a high degree of pyridinic and pyrrolic sites and outstanding ORR activity in alkaline conditions. The salt cations Mg2+ or Zn2+ act as template ions, which results in tetrapyrrolic functional groups embedded into the carbon structure. Based on this, we recently introduced a mild procedure to synthesize Fe-N-C, which leads to active-site formation at low temperatures due to coordination of Fe ions to the tetrapyrrolic functional groups of NDCs.2, 3 Figure 2: Scheme of the Active-Site Imprinting Strategy. A pyrolytic template-ion reaction forms a tetrapyrrolic functional group within the carbon framework (first step). Exchange of the template ion T (with T=Mg2+ or Zn2+) with Fe results in tetrapyrrolic Fe-N-C. The synthesis strategy of active-site imprinting and transmetalation is decoupling the preparation of NDCs from the preparation of the active sites and therefore breaks with the dogma of Fe-N-Cs preparation, circumventing the limitation to 3 wt.% of Fe.9 After a thermal activation step the Fe-N-Cs derived from active site imprinting show very good performance of ORR in acidic conditions, both on the half-cell (rotating disc electrode) and full-cell (5cm2 PEM single cell) level. Figure 3: a) Rotating disk electrode measurements show the large increase in ORR activity and low amount of peroxide formed by exchange of Zn to Fe coordinated to tetrapyrrolic NDC, especially when followed by a second heat treatment. b) Single cell PEMFC H2-O2 tests show a peak power density above 0.4 W cm-2 at a catalyst loading of 2 mg cm-2. Active-site imprinting is currently used by many groups worldwide, successfully pushing the performance of Fe-N-Cs forward, with higher Fe loadings and improved porosities.10-12 Challenges are the moderate turnover frequency (0.24 e- s-1 at 0.8 VRHE) of tetrapyrrolic Fe-N4 sites, 13 and a moderate shelf-life of tetrapyrrolic Fe-N-Cs in atmospheric conditions.14 Besides improvements of electrode engineering and optimization of fuel cell management, an improved synthetic control, leading to more active and stable catalytic environments are needed to tackle the need of sustainable electrocatalysts for future energy conversion technology.15 T2 - International Conference on Materials and Systems for Sustainability (ICMaSS2023) CY - Nagoya, Japan DA - 01.12.2023 KW - PGM-free catalysts PY - 2023 AN - OPUS4-61937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Valorization of carbon dioxide by the electrocatalytic reduction coupled to acetogens via multiple electron carriers N2 - A summary of the DFG project "Ecat-Acetogens" within the SPP priority programm Ebiotech (2240) was given. The successful developmante of a bioelectrocataltic reactor system based on standard 2l stirred tank bioreactors and common 5cm2 singel cell electrolysis reactors was presnted and first results discussed based on the catlytic properties of a specifically designed cathode catalyst for CO2 reduction. T2 - DFG SPP Statusmeeting Ebiotech 2024 CY - Jena, Germany DA - 22.04.2024 KW - CO2 conversion KW - Bioelectrocatalytic reactor PY - 2024 AN - OPUS4-61939 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -