TY - CONF A1 - Tiebe, Carlo T1 - Mess- und Prüfverfahren mit Sensorik N2 - Mess- und prüftechnische Verfahren sind zur Prozesskontrolle und Sicherheitsüberwachung in Wasserstofftechnologien von hoher Bedeutung. Typische Anwendungsgebiete von Sensoren sind Sicherheitsüberwachung, Leckdetektion und Prozesskontrolle. In diesem Beitrag werden Themen zur Erkennung von freigesetztem Wasserstoff sowie die Bestimmung des Wasserstoff-Luftverhältnisses mit Gassensoren, Fehlstellenerkennung mit geführten Ultraschallwellen zur Lebensdauerüberwachung (Structural Health Monitoring) von Wasserstoffspeichern sowie der Einsatz faseroptischer Sensoren zur Überwachung des Dehnungs- und Alterungsverhaltens sowie zur Schadensfrüherkennung von Wasserstoffspeichern vorgestellt. T2 - DVGW Kongress H2 Sicherheit CY - Online meeting DA - 27.01.2021 KW - Metrologie KW - Gassensoren KW - Structural Health Monitoring KW - Faseroptische Sensoren KW - Wasserstoff PY - 2021 AN - OPUS4-52141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. A1 - Bock, Robert T1 - Burst strength and its scatter as key points of safety N2 - Based on the preliminary presentations in this task force it is repeated how a basic population scatters and its degradation influences properties statistically. There is a remainder on the issue of accepting borderline populations due to the minimum burst ratio requirement. Then it is explained in detail how the analysis of minimum requirements by a Monte-Carlo-simulation works. The result with respect to the further reduced minimum burst ratio of 2.0 is summarised and means a two-step approach of two scatter levels requiring two different minimum burst ratios. The methods for evaluating batch tests are analysed. A proposal for integration a statistical analysis is described in detail. Finally, the positive effect of proof testing is shown and its dependence from the real ageing is shown. This ends in the recommendation to have a stronger and quantitative look on real ageing and to follow the 2 proposed sets of criteria for a safe usage of hydrogen storage systems. T2 - 10th IWG on rev GTR 13 CY - Online meeting DA - 28.06.2021 KW - Basic population KW - Minimum burst ratio KW - Monte-Carlo-simulation KW - Borderline population KW - Batch test KW - Proof test KW - Ageing PY - 2021 UR - https://wiki.unece.org/download/attachments/128419731/GTR13-10-08%20BAM%20GTR%2013-2%20scatter%20criteria%20for%20min%20burst%202021-06-25.pdf?api=v2 AN - OPUS4-53149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Solberg, S. A1 - Zimmermann, P. A1 - Wilhelmsen, Ø. A1 - Lamb, J. A1 - Bock, Robert A1 - Burheim, O. T1 - Heat to Hydrogen by Reverse Electrodialysis—Using a Non-Equilibrium Thermodynamics Model to Evaluate Hydrogen Production Concepts Utilising Waste Heat N2 - The reverse electrodialysis heat engine (REDHE) is a promising salinity gradient energy technology, capable of producing hydrogen with an input of waste heat at temperatures below 100 °C. A salinity gradient drives water electrolysis in the reverse electrodialysis (RED) cell, and spent solutions are regenerated using waste heat in a precipitation or evaporation unit. This work presents a non-equilibrium thermodynamics model for the RED cell, and the hydrogen production is investigated for KCl/water solutions. The results show that the evaporation concept requires 40 times less waste heat and produces three times more hydrogen than the precipitation concept. With commercial evaporation technology, a system efficiency of 2% is obtained, with a hydrogen production rate of 0.38 gH2 m−2h−1 and a waste heat requirement of 1.7 kWh g−1H2. The water transference coefficient and the salt diffusion coefficient are identified as membrane properties with a large negative impact on hydrogen production and system efficiency. Each unit of the water transference coefficient in the range tw=[0–10] causes a −7 mV decrease in unit cell electric potential, and a −0.3% decrease in system efficiency. Increasing the membrane salt diffusion coefficient from 10−12 to 10−11 leads to the system efficiency decreasing from 2% to 0.6% KW - Non-equilibrium thermodynamics KW - Hydrogen KW - Waste heat KW - RED PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-556677 DO - https://doi.org/10.3390/en15166011 VL - 15 IS - 16 SP - 6011 PB - MDPI AN - OPUS4-55667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baglo, K. A1 - Sauermoser, M. A1 - Lid, M. A1 - Paschke, T. A1 - Bin Afif, A. A1 - Lunzer, M. A1 - Bock, Robert A1 - Steinert, M. A1 - Flaten, A. A1 - Torgersen, J. T1 - Overcoming the transport limitations of photopolymer-derived architected carbon N2 - Photopolymer derived carbon grows in popularity, yet the range in available feature sizes is limited. Here we focus on expanding the field to low surface to volume ratio (SVR) structures. We describe a high temperature acrylic photopolymerizable precursor with FTIR and DSC and develop a thermal inert-gas treatment for producing architected carbon in the mm scale with SVR of 1.38 x10-3 μm-1. Based on TGA and MS, we distinguish two thermal regimes with activation energies of ~79 and 169 kJ mol-1, which we reason with mechanisms during the polymer’s morphologic conversion between 300 - 500 °C. The temperature range of the major dimensional shrinkage (300-440 °C, 50%) does not match the range of the largest alteration in elemental composition (440-600 °C, O/C 0.25-0.087%). The insights lead to an optimized thermal treatment with an initial ramp (2 °C min-1 to 350 °C), isothermal hold (14h), post hold ramp (0.5 °C min-1 to 440 °C) and final ramp (10 °C min-1 to 1000 °C). The resulting carbon structures are dimensionally stable, non-porous at the μm scale, and comprise an unprecedented variation in feature sizes (from mm to μm scale). The findings shall advance architected carbon to industrially relevant scales. KW - Carbon KW - Photopolymer KW - Transport limitations KW - Porous materials KW - Additive manufacturing PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575038 DO - https://doi.org/10.1002/admt.202300092 SN - 2365-709X SP - 2300092 PB - Wiley-VCH GmbH AN - OPUS4-57503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Competence Centre H2Safety@BAM - We build trust in hydrogen technologies N2 - Der Beraterkreis Gase wird regelmäßig von der Berufsgenossenschaft Rohstoffe und chemische Industrie, Bereich Prävention, organisiert. Die Veranstaltung dient dem Austausch zwischen Wissenschaft und Wirtschaft zu aktuellen sicherheitstechnischen Fragestellungen rund um Sauerstoff und Wasserstoff. In diesem Zusammenhang hat die BAM einen Überblick über ihre verschiedenen Aktivitäten des Kompetenzzentrums H2Safety@BAM vorgestellt, die sich in der gesamten Wasserstoffwertschöpfungskette wiederfinden. Darüber hinaus wurden die Planungen für den Ausbau der Prüfinfrastruktur auf dem Testgelände Technische Sicherheit der BAM vorgestellt. Es wurden auch die Ergebnisse des Projekts DELFIN zur Sicherheit von Druckgasspeichern, den Freisetzungsuntersuchungen von Flüssigwasserstoff sowie die Unterfeuerung entsprechender Kryospeicher und die Planungen zum Projekt ModuH2Pipe@BAM präsentiert. Den Abschluss bildeten die aktuellen Empfehlungen des Forschungsnetzwerkes Wasserstoff. N2 - The Gases Advisory Group is organized regularly by the Prevention Division of the German Employer's Liability Insurance Association for Raw Materials and the Chemical Industry. The event serves as an exchange between science and industry on current safety-related issues concerning oxygen and hydrogen. In this context, BAM presented an overview of its various activities of the competence center H2Safety@BAM, which are reflected in the entire hydrogen value chain. In addition, the plans for the expansion of the test infrastructure at BAM's Technical Safety Test Site were presented. The results of the DELFIN project on the safety of pressurized gas storage tanks, the release tests of liquid hydrogen as well as the underfiring of corresponding cryogenic storage tanks and the plans for the ModuH2Pipe@BAM project were also presented. The presentation concluded with the current recommendations of the Hydrogen Research Network. T2 - BG RCI Beraterkreis Gase CY - Berlin, Germany DA - 25.04.2023 KW - Berufsgenossenschaft KW - Sicherheit von Wasserstofftechnologien KW - H2Safety@BAM KW - modulare Pipelineanlage PY - 2023 AN - OPUS4-57398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. A1 - Günzel, Stephan T1 - The maximum acceptable consequence limit as a control instrument N2 - The presentation starts with the first agreement of making a national attempt for the introduction of a pV-limit for hydrogen transport. It explains aspects of the technical development, provides an impression of catastrophic incidents, and explains the difference between risk control and consequence limitation. Then the process of determining consequences and the result from the discussion at the UN-WG are explained. The next part summarises the approach for counting the number of impacted persons as a function of the model of pressure wave, the pressure peak, the limits of injured persons and the population density. Finally, the latest state of the discussion and the subsequent recommendations for a pV-value and the adequate phrases for explanation are introduced. T2 - 29th BAM-DIN-IGV-DVFG-Meeting CY - Online meeting DA - 23.02.2022 KW - Hydrogen KW - Pressure recepacles KW - Consequence limit KW - Risk control KW - Population density KW - Pressure wave PY - 2022 AN - OPUS4-54608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Education and Training Activities of the Competence Centre H2Safety@BAM N2 - Green hydrogen is seen as a cornerstone of the energy transition and decarbonization efforts of industry, transportation and the utilities sectors. The binding goal of the EU and Germany to reduce net zero carbon emissions by 2045 will substantially increase the demand for green hydrogen as an important carbon-free substitute for fossil fuels. The World Energy Council expects an annual demand of 60 million tons (equivalent 2.000 TWh) hydrogen and its derivatives (especially ammonia and methanol) in the EU until 2050. lt is estimated that the EU can produce less than half of its needed hydrogen by 2050, and will need to import the rest. African coastal countries therefore have the opportunity to become net exporters of their carbon-free regenerative energy in the form of hydrogen and its derivatives and to enable better economic growth and generate wealth on the African continent. The large-scale production, transport and storage of green hydrogen will require large investments in the development of knowledge and training, logistics and capital goods - for both the EU and African countries. BAM is already facing the lack of skilled workers and hydrogen experts. By bundling its expertise in the field of hydrogen technologies into a competence center H2Safety@BAM to create confidence in the technology The topic of hydrogen has been current at BAM for more than one hundred years and is also currently the focus of numerous research and cooperation activities. In order to transfer its expertise in this field BAM developed a number of education activities. The centre of all activities is the Graduate School “Trustworthy Hydrogen”, established in 2022 together with the BTU Cottbus. In the presentation all activities and especially those of the graduate school and details of the cooperation with the University of Namibia are shown. T2 - German-African Green Hydrogen Forum CY - Bernburg (Saale), Germany DA - 23.05.2023 KW - H2Safety@BAM KW - Graduate School KW - Trustworthy Hydrogen KW - Education KW - Skilled workers PY - 2023 AN - OPUS4-57633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Safety Aspects for Hydrogen Technologies - H2Safety@BAM N2 - Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To be able to achieve the targets defined by 2045, the EU and the German government have drafted a framework for action and are making long-term investments in research, development and the rapid implementation of innovative hydrogen technologies. The conditions for a successful energy transition and the economic use of green hydrogen as a clean energy carrier are Hydrogen readiness and a rapid market ramp-up, as well as the establishment of the necessary value chains in the national and European framework. Reliable quality and safety standards are the prerequisite for ensuring safety of supply and environmental compatibility and for creating trust in these technologies. BAM has bundled its expertise in the field of hydrogen technologies into a competence center H2Safety@BAM to create confidence in the technology and to support the hydrogen strategies of the German government and the EU. The topic of hydrogen has been current at BAM for more than one hundred years and is also currently the focus of numerous research and cooperation activities. The competence centre H2Safety@BAM and its vision of “We build trust in hydrogen technologies” will be presented with its many safety-related topics, which can be found throughout the entire hydrogen value chain. Two deep dives will present the results on projects dealing with the design-to-cost issue of classical pressurized gas storage containments and the consequences of the release of liquid hydrogen, which will be roughly compared to the release of ammonia. T2 - 25. Kalorimetrietage CY - Braunschweig, Germany DA - 31.05.2023 KW - H2Safety@BAM KW - Safety KW - Hydrogen KW - Gas cylinders KW - DELFIN KW - LH2 KW - Hydrogen release KW - Rapid phase transition KW - Consequences KW - Cyro storage tanks PY - 2023 AN - OPUS4-57629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Lithiumbatterien: Anforderungen für die Beförderung von beschädigten Batterien und Überblick über die UN TDG Arbeitsgruppe zur gefahrenbasierten Klassifizierung N2 - Lithiumbatterien: Anforderungen für die Beförderung von beschädigten Batterien und Überblick über die UN TDG Arbeitsgruppe zur gefahrenbasierten Klassifizierung BAM ist beteiligt in den Arbeitsgruppen und stellt eigene Prüfergebnisse vor. T2 - IAA 2022 Transportation, Gefahrguttag des BMDV, "Aktuelle Entwicklungen im Gefahrgutrecht und Erhöhung der Sicherheit von Gefahrgutfahrzeugen" CY - Hannover, Germany DA - 21.09.2022 KW - Lithiumbatterien KW - Energiespeicher KW - UN TDG Lithiumbatterien PY - 2022 AN - OPUS4-56742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Herausforderung: Verpackungen von Lithiumbatterien N2 - Je nach Zustand bestehen unterschiedliche Anforderungen an Verpackungen zum Transport von Lithiumbatterien. Hierbei sind bestimmte Prüfungen und Kriterien zu betrachten. Aktuell besteht insbesondere der Bedarf an Verpackungen für kritisch defekte Batterien. Innovative Lösungen sind gefordert. T2 - Workshop AG Future Markets New Energy Packaging CY - Online meeting DA - 12.03.2021 KW - Lithium Batterien KW - Gefahrgutverpackungen PY - 2021 AN - OPUS4-54181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by glow-discharge optical emission spectroscopy N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - Adlershofer Forschungsforum 2022 CY - Berlin, Germany DA - 11.11.2022 KW - Lithium Ion Batteries KW - GD-OES KW - FIB KW - SEM KW - EDX PY - 2022 AN - OPUS4-56246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Anita T1 - Batterien sicherer machen - Interview N2 - Im Batterietestzentrum der BAM werden Untersuchungen durchgeführt, um die Sicherheit von Lithiumbatterien bewerten zu können. Dies ermöglicht der BAM, die Politik zu beraten und die Regelwerksentwicklung kompetent mitzugestalten. KW - Lithiumbatterien KW - Gefahrgut KW - Sicherheit PY - 2024 SN - 0016-5808 IS - 9 SP - 8 EP - 9 PB - Storck CY - Hamburg AN - OPUS4-62335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Sicherheit von Lithium-und Natrium-Batterien - Brandprüfungen und Sicherheitsmaßnahmen N2 - Die Präsentation gibt einen ganzheitlichen Überblick im sicheren Umgang mit elektrochemischen Energiespeichertechnologien. Ferner enthält diese Präsentation einen Überblick über die aktuell an der BAM durchgeführten Forschungsprojekte und hoheitlichen Aufgaben mit Bezug diesen Energiespeichern T2 - Lehrgang "Moderne elektrochemische Energiespeicher" (905350) CY - Mannheim, Germany DA - 16.09.2024 KW - Lithiumbatterien KW - Thermal Runaway KW - Sicherheit KW - Natriumbatterien PY - 2024 AN - OPUS4-62302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - Electroanalytical experiments at macroporous electrodes for redox-flow batteries N2 - Macroporous carbon felts (CFs) are the prevalently used electrode material for redox-flow batteris. Owing to their large internal surface area, these structures can efficiently drive the Faradaic reactions in a RFB. However, the electrochemical characterization of novel CFs, or modified CF-materials is a cumbersome task. This is essentially related to the complex mass-transport phenomena which are convoluted with the electrode kinetics. This talk will focus on ex-situ cyclic voltammetry and operando electrochemical impedance spectroscopy as electroanalytical techniques for porous RFB electrodes. Common pitfalls in the voltammetric analysis of CFs are elucidated and recent strategies for modeling and evaluating CV experiments on porous structures are introduced. Finally, a method based on electrochemical impedance spectroscopy is introduced which allows for an operando fingerprinting of electrochemical reactions in a vanadium-based RFB. T2 - Flow4U-Event CY - Eindhoven, Netherlands DA - 08.04.2024 KW - Porous Electrodes KW - Redox-Flow Batteries KW - Digital Simulation KW - Convolutive modeling KW - Impedance Spectroscopy KW - Distribution of Relaxation Times PY - 2024 AN - OPUS4-62304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tichter, Tim T1 - The DSDC Algorithm - A Universal Strategy for Simulating Voltammetry of Rough and Porous Electrodes N2 - Porous electrodes or electrodes with rough surfaces offer a multitude of tailored applications. The theoretical treatment of such structures is, however, challenging since their voltammetric profile is a convolution of the time-dependent current with an inherently random mass-transfer function. Since the latter quantity has no analytical solution, the classical convolutive techniques cannot be applied. Therefore, simulations have been based on severe simplifications of the diffusion space [1,2] or were performed by means of digital simulation. Unfortunately, the latter approach becomes computationally prohibitive when a large and/or highly resolved, three-dimensional diffusion space needs to be considered. To mitigate these problems, we introduce the digital simulation, deconvolution, convolution (DSDC) algorithm, consisting of four successive steps [3]. Firstly, the three-dimensional image of the electrode under investigation is extracted via micro X-ray computed tomography (µ-CT) or atomic-force microscopy (AFM). Subsequently, the purely mass-transfer controlled current of this spatial template is generated by means of digital simulation. In the third and fourth steps, the mass-transfer function is extracted for a set of discrete points in time by numerical deconvolution and finally used for classical convolutive simulations. In this manner, any simplification of the diffusion domain becomes obsolete and the advantages of digital simulation and convolutive modelling are most favourably combined. Finally, this DSDC-algorithm provides an interdisciplinary connection of ex-situ imaging and in-situ electrochemistry which results in excellent agreement of simulated and experimentally acquired data. T2 - Bunsentagung 2024 CY - Aachen, Germany DA - 25.03.2024 KW - Porous Electrodes KW - Convolutive Modeling KW - Digital Simulation KW - Diffusion KW - Redox-Flow Batteries PY - 2024 AN - OPUS4-62303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leonhardt, Robert T1 - Impedance-based characterization of the overstress-related degradationin alkali metal-ion cells N2 - The successful repurposing of degraded alkali metal-ion batteries in second-life applications is a vital step towards achieving a circular economy. While reusing aged cells is a promising way of mitigating their overall environmental footprint, it is crucial to anticipate their future safety and performance characteristics. Unfortunately, predicting these properties is a cumbersome task, essentially caused by limited knowledge of the interference of different degradation modes in the cells’ first life. To still enable estimating of these parameters from a current state, the present study systematically investigates the impact of abusive conditions in an early phase of the cells’ life on their subsequent degradation behavior. For this purpose, individual lithium-ion and sodium-ion cells are initially stressed by different measures such as deep-discharging, high-temperature conditions, and deliberate combinations of the aforementioned methods. Electrochemical performance indicators are monitored during subsequent cycling of the cells, which provides insights into the interdependencies of different degradation modes induced by specific stress conditions. In this manner, it is clarified whether or not the total degradation can be determined by a convolution or a superposition of individual deterioration effects and thus, be described as a multidimensional state function. This knowledge will finally contribute to a better understanding of the performance and safety behavior of degraded batteries which can help to successfully implement them into second-life applications. T2 - Doktorandenseminar der Technischen Universität Berlin CY - Berlin, Germany DA - 30.09.2025 KW - Alkali metal-ion batteries KW - Electrochemical performance indicators PY - 2025 AN - OPUS4-65068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Lithiumbatterien, Natrium-Ionen Batterien, Festkörperbatterien - Wohin geht die Regelwerksentwicklung? N2 - Der Markt für Energiespeicher befindet sich in einer Phase intensiver technologischer Diversifizierung. Neben etablierten Lithium-Ionen-Batterien gewinnen neue Systeme wie Natrium-Ionen-Batterien und künftige Technologien wie Festkörperbatterien zunehmend an Bedeutung. Dies stellt jedoch neue Anforderungen an die Handhabung und Logistik respektiver Systeme und rückt die Klassifizierung von Batterien nach Gefährlichkeit stärker in den Fokus. In diesem Kontext gilt es Transportprozesse zu vereinfachen und simultan die Sicherheit zu erhöhen. Im Rahmen dieses Vortrags werden aktuelle und kommende Batterietechnologien vorgestellt, die essenziellen Hürden bei deren Handhabung, Transport und Lagerung zusammenfassend dargestellt und ein umfassender Ausblick auf die Regelwerksentwicklung gegeben. Schwerpunkte liegen dabei auf I) der Entwicklung dedizierter Methoden für die Einordnung in Kategorien defekte und kritisch defekte Batteriesysteme, II) Passivierende Verfahren (thermisch und/oder elektrisch) für einen sicheren Transport und III) der Optimierung der Wertschöpfungskette des Gesamtsystems „Batterie“ durch effizientere Batteriekreisläufe und Recyclingverfahren. T2 - Zweite Fachkonferenz Transport und Lagerung von Lithiumbatterien 2025 CY - Augsburg, Germany DA - 03.07.2025 KW - Batteriesicherheit KW - Gekühlter Transport von Batterien KW - Tieftemperaturpassivierung KW - Regelwerksentwicklung KW - Wertschöpfungskette und Batterierecycling PY - 2025 AN - OPUS4-65078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - „Batterien“ Gefahrgutrechtliche Entwicklung für die Anwendung N2 - Der Markt für Energiespeicher bietet eine kontinuierlich wachsende, technologische Vielfalt. Neben etablierten Lithium-Ionen-Batterien gewinnen alternative Systeme wie Natrium-Ionen-Batterien zunehmend an Bedeutung. Jene Entwicklung steigert aktuell die Anforderungen an Regularien für Logistik und Handhabung ebendieser Systeme und bedarf einer dedizierten jedoch gleichwohl praktikablem Klassifizierung unterschiedlicher Batterien nach deren Gefährlichkeit. Genau dies ist der Schwerpunkt der vorliegenden Präsentation. Ein besonderer Fokus liegt dabei auf dem sicheren Transport kritisch defekter Batteriesysteme durch thermische Passivierung und/oder gezieltes Tiefentladen. Explizit werden aktuelle und zukünftige Batterietechnologien vorgestellt, die wesentlichen Herausforderungen bei Handhabung, Transport und Lagerung zusammengefasst und ein umfassender Ausblick auf die Weiterentwicklung der relevanten Regelwerke gegeben. T2 - 35. Münchner Gefahrgut-Tage CY - Munich, Germany DA - 26.05.2025 KW - Batteriesicherheit KW - Thermisches Durchgehen KW - Tieftemperaturpassivierung KW - Initiale Reaktionstemperatur KW - Gekühlter Transport von (kritisch) defekten Batterien PY - 2025 AN - OPUS4-65077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Morcillo, Dalia T1 - High-resolution absorption isotopic spectrometry as a tool for aging studies of Li-ion batteries N2 - Lithium (Li) is the key element in the manufacturing of batteries. Isotopic study of Li may help to identify the causes of battery aging due to isotopic fractionation during charge/discharge cycles. Isotopic ratio determination is based on monitoring the isotopic components of lithium by their spin-orbit coupling and its isotopic shift of about 15 pm for the 22P←22S electronic transition around 670.788 nm. In this work, we propose improvements to our previous work [1] by using a higher-resolution double echelle modular spectrometer (HR-DEMON II) coupled to a continuum source graphite furnace atomic absorption spectrometer (HR-CS-GF-AAS) for the isotopic analysis of Li. The data analysis was carried out by using a decision-tree-based ensemble machine learning (ML) algorithm (XGBoost). A set of samples with 6Li isotope amount fractions ranging from 0.0004 to 0.99 mol mol-1 was used for the algorithm's training. Subsequently, the procedure was validated by a set of stock chemicals (Li2CO3, LiNO3, LiCl, and LiOH) and a BAM candidate reference material, a cathode material (NMC111). Finally, the ML model was applied to determine the isotope ratio of geological samples, including anorthosite, granite, soil, rhyolite, nepheline syenite, and basalt and battery samples. These samples were measured as digested without any further purification step. Improvements in the optical resolution resolve the lithium isotopic components of the atomic spectra. In the studied geological samples, were found δ7Li values between -0.5 and 4.5 ‰ with a precision range of 1 to 2 ‰. In addition, the proposed method was validated with multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS), and these results are comparable and compatible. T2 - Caltech-BAM Meeting CY - Online meeting DA - 10.08.2022 KW - Lithium isotope KW - Machine learning KW - Battery KW - High-resolution absorption isotopic spectrometry PY - 2022 AN - OPUS4-56380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Chemical characterization of aging processes in high energy-density lithium-ion batteries N2 - Introduction Lithium-ion batteries (LIBs) are one key technology to overcome the climate crisis and energy transition challenges. Demands of electric vehicles on higher capacity and power drives research on innovative cathode and anode materials. These high energy-density LIBs are operated at higher voltages, leading to increased electrolyte decay and the current collectors' degradation. Even though this fundamental corrosion process significantly affects battery performance, insufficient research is being done on the aluminum current collector. Fast and convenient analytical methods are needed for monitoring the aging processes in LIBs. Methods In this work glow-discharge optical emission spectrometry (GD-OES) was used for depth profile analysis of aged cathode material. The measurements were performed in pulsed radio frequency mode. Under soft and controlled plasma conditions, high-resolution local determination (in depth) of the elemental composition is possible. Scanning electron microscopy (SEM) combined with a focused ion beam (FIB) cutting and energy dispersive X-ray spectroscopy (EDX) was used to confirm GD-OES results and obtain additional information on elemental distribution. Results The aging of coin cells manufactured with different cathode materials (LCO, LMO, NMC111, NMC424, NMC532, NMC622, and NMC811) was studied. GD-OES depth profiling of new and aged cathode materials was performed. Quantitative analysis was possible through calibration with synthetic standards and correction by sputter rate. Different amounts of aluminum deposit on the cathode surface were found for different materials. The deposit has its origin in the corrosion of the aluminum current collector. The results are compatible with results from FIB-EDX. However, GD-OES is a faster and less laborious analytical method. Therefore, it will accelerate research on corrosion processes in high energy-density batteries. Innovative aspects - Quantitative depth profiling of cathode material -Monitoring of corrosion processes in high energy-density lithium-ion batteries - Systematic investigation of the influence of different cathode materials T2 - ANAKON 2023 CY - Vienna, Austria DA - 11.04.2023 KW - Lithium Ion Batteries KW - GD-OES KW - Depth-profiling PY - 2023 AN - OPUS4-58586 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by glow-discharge optical emission spectroscopy N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs.[1] Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - European Winter Conference on Plasma Spectrochemistry (EWCPS 2023) CY - Ljubljana, Slovenia DA - 29.01.2023 KW - Lithium-ion batteries KW - Aging mechanisms KW - Depth-profiling PY - 2023 AN - OPUS4-56992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Role of the Authority in the Approval Process of Packaging N2 - In Germany, BAM is the competent authority in the field of dangerous goods transport. The international dangerous goods transportation rules are presented and their adaptation into German law is described. BAM is responsible for dangerous goods packaging testing, manufacturer surveillance, packaging approvals and inspection of IBC and provides “Gefahrgutregeln” (GGR) to define the processes, e.g. of dangerous goods packagings approvals and surveillance.” T2 - Sino-German Workshop on Dangerous Goods Packaging CY - Online meeting DA - 18.11.2022 KW - Gefahrgutverpackungen KW - Zulassung KW - ADR PY - 2022 AN - OPUS4-56754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Winckelmann, Alexander T1 - Investigation of degradation of the aluminum current collector in lithium-ion batteries by GD-OES N2 - Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs. T2 - Empa Group Meeting CY - Dübendorf, Switzerland DA - 22.11.2022 KW - Lithium Ion Batteries KW - GD-OES KW - FIB KW - SEM KW - EDX PY - 2022 AN - OPUS4-56584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - A Journey From Formula Student to Research at BAM N2 - In this presentation, the battery and cell test center of BAM is introduced to the Berlin Motion Lab. Points of intersection are identified, and interested students are familiarized with BAM’s research priorities in the field of batteries. The aim is to foster interaction and to inspire young researchers to engage with technologically relevant topics. T2 - Berlin Deep Tech Nexus Meetup CY - Berlin, Germany DA - 26.02.2025 KW - Battery safety KW - BAM-academy KW - Qualification programme for PhD students at BAM KW - Advanced (battery) safety topics PY - 2025 AN - OPUS4-65079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. A1 - Hajhariri, Aliasghar A1 - Sklorz, Christian A1 - Kriegsmann, Andreas A1 - Müller, Karsten T1 - A modular concept for protection against debris flight - Design, properties and usage N2 - With advances in technological development, stationary and mobile storage units for compressed hydrogen are becoming larger and larger. Their number is also increasing. At the same time, their design has evolved from steel and aluminium to pressure vessels made of composite materials. For safety reasons the design approval of those composite cylinders requires fire engulfment tests, which are mainly organised as open-air tests always needs dedicated protection measures. Under some conditions those protections measures even reduce the effort for organisational safety measures if e.g. the emission of splinters can get totally prevented. Another aspect is the improved reproducibility of fire tests by reducing the influence of wind. Between 2017 and 2019, BAM developed a stackable protective frame made of steel to safely capture splinters for the safe execution of high-energy impact tests. However, this frame was not flexible enough for the follow-up project, which led to a completely new protection concept for (potentially) destructive tests on gas-filled pressure vessels. This concept is based on very robust building blocks made from welded steel. Despite their considerable weight of around 500 kg p.p., they can be combined and stacked very easily like ‘Lego bricks’. The presentation will show the flexibility of the concept, some results of tests on the robustness against pressure waves and the effectiveness in wind attenuation. Finally, the interaction with a new, also modular burner concept for localised fires and full engulfment fires will be presented. T2 - 11th International conference on hydrogen safety (ICHS 2025) CY - Seoul, Republic of Korea DA - 22.09.2025 KW - Splinter protection KW - Pressure vessel testing KW - Fire engulfment KW - Destructive tests KW - Rupture KW - Gaseous tests KW - Pressure wave KW - Test equipment KW - Precaution measures PY - 2025 SN - 979-1-2243-0274-2 VL - 2025 SP - 1428 EP - 1439 AN - OPUS4-65100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - Welcome to BAM and the Competence Centre H2Safety@BAM N2 - The presentation starts with general slides on BAM, its mission and focus areas. It provides the fields of activity in the focus area “Energy” and explains the structure of the competence Centre and its focus on building trust in hydrogen. The next part shows the H2Safety@BAM’s Products“ in a nutshell and explains the main items with deep dives on the Living Lab “Hydrogen Networks”, the Living Lab „Hydrogen Refuelling Station“, on Reference Materials and Procedures, Storage of Liquid Hydrogen, Storage Systems for Compressed Gases and Material Compatibility. T2 - Information Tour at the Invitation of the Federal Foreign Office The Hydrogen Economy in Germany CY - Berlin, Germany DA - 05.11.2025 KW - Living Lab “Hydrogen Networks” KW - Living Lab „Hydrogen Refueling Station“ KW - Reference Materials and Procedures KW - Storage of Liquid Hydrogen KW - Storage Systems for Compressed Gases KW - Material Compatibility PY - 2025 AN - OPUS4-65101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sterr, Andrea A1 - Schwarz, Irina T1 - Valorization of Carbon Dioxide by Electrocatalytic Reduction Coupled to Acetogens via Multiple Electron Carriers (Ecat-Acetogens II) N2 - A Bioelectrochemical approach for reducing CO2 to fuels or value-added chemicals allows overcoming the limitations of a pure biochemical or electrochemical approach. A Bioelectrochemical system (BES) for this application has been developed in cooperation with TUM in the first project phase. BAM's contribution to the research focuses on the electrochemical side of the setup, mainly on the development of a suitable CO2RR catalyst for reducing CO2 to CO, which is then consumed by actogenic bacteria to produce further products. Single-metal-atom catalysts in a nitrogen-doped carbon matrix (M-N-Cs) are a promising, sustainable alternative to expensive rare-metal catalysts like Ag and Au. In this work, the first-generation catalyst, a ZIF-8-based Co-N-C is compared to a Mg salt mix templated Ni-N-C. In the new catalysts, the activity for CO2RR as well as the stability during BES operation could be enhanced. T2 - E-Biocat Statusupdate 2025 CY - Karlsruhe, Germany DA - 01.04.2025 KW - CO2RR KW - M-N-Cs KW - Bioelectrochemical System PY - 2025 AN - OPUS4-65143 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - DE-JP Hydrogen Safety Cooperation - Contribution of H2Safety@BAM N2 - The presentation starts with general slides on BAM, its location, mission, tasks and focus areas. It provides the fields of activity in the focus area “Energy” and explains the structure of the competence Centre and its focus on building trust in hydrogen. The test sides at TTS on hydrogen are explained in combination with the H2Safety@BAM’s products in a nutshell. Then the major H2-applications of H2Safety@BAM are explained by deep dives on the Living Lab “Hydrogen Networks”, the Living Lab „Hydrogen Refuelling Station“, on Explosion Protection, on Reference Materials and Procedures, on Material Compatibility, on Storage Systems for Compressed Gases and Storage of Liquid Hydrogen as well as on the Training and Further Education. The presentation ends with an overview about our international work on H2Safe-Collaboration. T2 - KICK-OFF WORKSHOP: JAPANESE-GERMAN COOPERATION ON H2 SAFETY CY - Online meeting DA - 15.12.2025 KW - Living Lab KW - Hydrogen Networks KW - Hydrogen Refuelling Station KW - Explosion Protection KW - Material Compatibility KW - Liquid Hydrogen KW - Compressed Gases PY - 2025 AN - OPUS4-65151 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ghaznavi, Ali T1 - Machine Learning Approach for Robust Acoustic Emission-Based Damage Classification in Pressure Vessels N2 - Accurate damage classification of Composite Pressure Vessels (CPVs) is crucial for understanding failure behaviour of hydrogen storage systems. Acoustic Emission (AE) monitoring is a non-destructive testing technique capable of detecting signals from different failure mechanisms such as fiber breakage and matrix cracking, supporting durability assessment of CPVs. Therefore, the main objective of this study is to combine AE and advanced deep learning techniques to develop a robust framework for automatic and accurate identification and classification of damage mechanisms across various CPVs. The evolutionary Genetic Algorithms (GA) was used for feature selection, followed by unsupervised clustering to generate automatic labels for model training. Two different FCNN and CNN-LSTM architectures were used to train individual models based on different AE datasets. Later, Adaptive Transfer Learning (ATL) and Meta Ensemble Learning (MEL) techniques were applied to handle data variability and train predictive generalized model over varied AE datasets. The ATL fine-tunes a pre-trained models to leverage their knowledge, while MEL uses pre-trained models' predictions as meta features to train a meta model. Experimental results demonstrate that while both generalized ATL and MEL trained models perform well across different AE datasets, the MEL framework outperforms ATL method in terms of evaluation metrics. The Mean-Accuracy score reaches 0.9026, and 0.9900 for ATL, and MEL, respectively. The most accurate multi-class classification results was achieved using MEL method in terms of the Mean-Accuracy and Recall metrics. The proposed framework provides a scalable, adaptive approach for automated damage classification using AE signals across diverse CPVs in real-world settings. T2 - BAM Colloquium Abteilung 3 CY - Berlin, Germany DA - 14.10.2025 KW - Acoustic Emission KW - Machine Learning KW - Sequential Neural Network KW - Deep Learning KW - Deep Neural Network PY - 2025 AN - OPUS4-65184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Popiela, Bartosz A1 - Günzel, Stephan A1 - Mair, Georg W. T1 - Discussion of creep phenomena during initial loading of type 4 composite pressure vessels N2 - To maintain the highest safety standards for compressed gas storage in composite pressure vessels, a deeper understanding of their ageing mechanism is required. In this study, two designs of type 4 cylinders were manufactured the only difference being the internal pressure function used during the filament winding process. Hence, their residual stress state and the quality of the composite layers varied. Ten pressure vessels were initially loaded under sustained pressure and increased temperature and later subjected to slow burst tests. Comparing the results with cylinders tested in a pristine state underlines a significant improvement in the performance of initially loaded cylinders of one of the designs. This phenomenon was caused by a significant decrease of the scattering of burst pressures within a sample. At the same time, a slight decrease of the burst pressures could be observed. An explanation of this behavior could be supported by strain measurements with fiber optic sensors, which were embedded in the composite material. The strains measured during the initial loading indicate a stress redistribution, which has an impact on the strength of the pressure vessel. Moreover, an increased stiffness during the slow burst tests after initial loading was observed that indicates a better exploitation of the individual layers of the composite structure. The study supports previous observations on the increased performance after initial loading and provides new insights into the strain development in creep effects in type 4 pressure vessels. T2 - Pressure Vessels & Piping Conference PVP2025 CY - Montreal, Quebec, Canada DA - 20.07.2025 KW - Type 4 pressure vessel KW - Creep KW - Fiber optic sensors KW - Slow burst test KW - Mechanics of composites PY - 2025 SN - 978-0-7918-8907-7 VL - 2025 SP - 1 EP - 7 PB - ASME AN - OPUS4-63897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Castells-Gil, Javier A1 - Zhu, Jinjie A1 - Itskou, Ioanna A1 - Wolpert, Emma H. A1 - Hunter, Robert D. A1 - Tidey, Jeremiah P. A1 - Pedersen, Angus A1 - Solvay, Elisa A1 - Tyrrell, Helen A1 - Petit, Camille A1 - Barrio, Jesús T1 - Impact of N-heterocyclic amine modulators on the structure and thermal conversion of a zeolitic imidazole framework N2 - The zeolitic imidazole framework-8 (ZIF-8) is a crystalline porous material that has been widely employed as template to fabricate porous nitrogen-doped carbons with high microporosity via thermal treatment at high temperatures. The properties of the carbon scaffold are influenced by the pore structure and chemical composition of the parent ZIF. However, the narrow pore size distribution and microporous nature from ZIF-8 often results in low mesopore volume, which is crucial for applications such as energy storage and conversion. Here we show that insertion of N-heterocyclic amines can disrupt the structure of ZIF-8 and dramatically impact the chemical composition and pore structure of the nitrogen-doped carbon frameworks obtained after high-temperature pyrolysis. Melamine and 2,4,6-triaminopyrimidine were chosen to modify the ZIF-8 structure owing to their capability to both coordinate metal ions and establish supramolecular interactions. Employing a wide variety of physical characterization techniques we observed that melamine results in the formation of a mixed-phase material comprising ZIF-8, Zn(Ac)6(Mel)2 and crystallized melamine, while 2,4,6-triaminopyrimidine induces the formation of defects, altering the pore structure. Furthermore, the absence of heterocyclic amine in the ZIF-8 synthesis leads to a new crystalline phase, unreported to date. The thermal conversion of the modified ZIFs at 1000 °C leads to nitrogen-doped carbons bearing Zn moieties with increased surface area, mesopore volume and varying degree of defects compared to ZIF-8 derived carbon. This work therefore highlights both the versatility of heterocyclic amines to modify the structure of framework materials as well as their role in tuning pore structure in nitrogen-doped carbons, paving the way to targeted design of high-performance electrodes for energy storage and conversion. KW - Zeolitic imidazole framework KW - Heterocyclic amine KW - Triaminopyrimidine PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639177 DO - https://doi.org/10.1039/D5TA04831A SN - 2050-7488 SP - 1 EP - 13 PB - Royal Society of Chemistry (RSC) AN - OPUS4-63917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braga, Daniel S. A1 - Pedersen, Angus A1 - Riyaz, Mohd A1 - Barrio, Jesús A1 - Bagger, Alexander A1 - Neckel, Itamar T. A1 - Mariano, Thiago M. A1 - Winkler, Manuel E. G. A1 - Stephens, Ifan E. L. A1 - Titirici, Maria‐Magdalena A1 - Nagao, Raphael T1 - In situ structural evolution and activity descriptor of atomically dispersed catalysts during nitrate electroreduction N2 - Single‐Atom Catalysts (SAC) have emerged as a promising class of materials for various catalytic applications, including the electrochemical nitrate reduction reaction (eNO3RR) and consequently ammonia production. While the efficiency and selectivity of these materials have been extensively highlighted for the eNO3RR, the in situ evolution to their structure and composition during electrocatalysis is largely unexplored and lacks catalyst design principles. To solve this, we investigated a series of high utilization metal‐nitrogen‐carbon (MNC) SACs (M = Cr, Fe, Co, Ni, and Cu) for eNO3RR. Except for CuNC, which selectively produced nitrite, all catalysts exhibited Faradaic efficiencies (FE) for ammonia exceeding 50%. NiNC demonstrated the highest performance (FE of 78.0 ± 2.9% at −0.4 V versus reversible hydrogen electrode (RHE) at pH 13 and maximum ammonia production rate of 615.7 ± 176.5 µmol·h−1·, corresponding to an energy efficiency of 15.1 ± 1.4% at −0.6 VRHE), followed by CoNC. In situ Synchrotron X‐ray fluorescence (SXRF) mapping at various cathodic potentials (from open circuit potential to 0.0 VRHE and then −0.6 VRHE at 100 mV steps) revealed significant mobility of Ni within the carbon matrix, leading to the formation of metallic clusters from 0.0 VRHE. Similar in situ metal clustering is observed for CoNC. Structure‐activity plots are generated from both MNC literature and results obtained here, finding a clear trend between OH binding energy and turnover frequency, with the high activity of NiNC and CoNC in this work explained by their stronger OH binding in the metallic structure compared to their SAC coordination. This work therefore, reveals the structure‐activity‐stability of MNCs for eNO3RR and provides a simple descriptor for identifying highly active eNO3RR catalysts and their in situ structural evolution. KW - Single atom KW - Nitrate reduction KW - Structure-activity-selectivity KW - In situ PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640353 DO - https://doi.org/10.1002/advs.202510282 SN - 2198-3844 VL - 12 IS - 39 SP - 1 EP - 14 PB - Wiley-VCH CY - Weinheim AN - OPUS4-64035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Morcillo, Dalia A1 - Winckelmann, Alexander A1 - Oelze, Marcus A1 - Leonhardt, Robert A1 - Schmidt, Anita A1 - Richter, Silke A1 - Recknagel, Sebastian A1 - Vogl, Jochen A1 - Panne, Ulrich A1 - Abad Andrade, Carlos Enrique T1 - Exploring Age-Induced Lithium Isotope Fractionation in Lithium-Ion Batteries using Microwave-Induced Cold Nitrogen Plasma Mass Spectrometry N2 - This study explores Microwave-Inductively Coupled Atmospheric-pressure Plasma Mass Spectrometry (MICAP-MS) as a cost-effective alternative to Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) for analyzing lithium isotopic composition in lithium-ion batteries (LIBs). We investigate the performance of MICAP-MS in measuring Li isotope ratios in new and aged commercial lithium cobalt oxide (LCO) batteries. Our results show that MICAP-MS, operating under cold plasma conditions at 800 W with an 8 mm torch position, achieves results metrologically compatible with MC-ICP-MS, with a precision ranging from 0.6‰ to 3.4‰ for δ7Li values. MICAP-MS benefits from a dielectric resonator for uniform plasma, better ion velocity control, and higher energy efficiency. Optimal settings were identified with dwell times of 10 ms for 6Li and 1 ms for 7Li. The study of LIBs revealed that 6Li migrates towards the anode over multiple charge–discharge cycles, causing 7Li to accumulate in the cathode, a fractionation effect that becomes more pronounced with prolonged cycling. MICAP-MS provides a cost-effective, precise alternative to MC-ICP-MS, with lower operational costs and enhanced portability, advancing the study of isotopic fractionation and aging in lithium-ion batteries. KW - MICAP-MS KW - Lithium KW - Battery aging KW - Lithium isotopes KW - Nitrogen plasma KW - Isotope fractionation KW - lithium cobalt oxide KW - LCO PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643777 DO - https://doi.org/10.1039/d4ja00324a SN - 0267-9477 SP - 1 EP - 11 PB - Royal Society of Chemistry (RSC) AN - OPUS4-64377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Schukar, Marcus A1 - Breithaupt, Mathias A1 - Kriegsmann, Andreas T1 - Distributed Fibre Optic Monitoring of Hydrogen Storage Composite Pressure Vessels for Automotive Use N2 - We present our research work on the condition monitoring of hydrogen storage composite pressure vessels using distributed fibre optic sensors. The sensing fibres are integrated into the composite structure by wrapping them over the polymer liner in the helical and circumferential direction during the manufacturing process of the carbon fibre reinforced polymer. The following use of optical backscatter reflectometry allows for continuous condition monitoring and precise detection and localization of structural damages during the entire service life. To account for the time-dependent strength degradation of the composite pressure vessels, both slow burst and ambient hydraulic cycling tests, respectively, were conducted on five 70 MPa pressure vessels with integrated fibre optic sensors. The results achieved via distributed fibre optic strain sensing demonstrate a near linear strain response to pressure suitable for sensitive condition monitoring and confirm the required robustness of the selected sensor solution. T2 - DGZfP-Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - Distributed fibre optic sensor (DFOS) KW - Composite pressure vessel KW - Optical backscatter reflectometry KW - Slow burst test KW - Ambient hydraulic cycling test PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653067 DO - https://doi.org/10.58286/32344 SP - 1 EP - 8 PB - NDT.net AN - OPUS4-65306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sauermoser-Yri, M. A1 - Veldurthi, N. A1 - Wölfle, C. H. A1 - Svartvatn, P. J. A1 - Flo Hoem, S. O. A1 - Lid, M. J. A1 - Bock, Robert A1 - Palko, J. A1 - Torgersen, J. T1 - On the porosity-dependent permeability and conductivity of triply periodic minimal surface based porous media N2 - With the fast development in the field of additive manufacturing, triply periodic minimal surface (TPMS) based porous media have recently found many uses in mechanical property tuning. However, there is still a lack of understanding in their porosity-dependent permeability and electrical as well as thermal conductivity. Here, we perform finite volume simulations on the solid and void domains of the Schoen gyroid (SG), Schwarz primitive (SP) and Schwarz primitive beam (SPB) TPMS with porosities between 63% and 88% in Ansys Fluent. A simple cubic lattice (CL) of equivalent porosity served as reference. The SPB and CL showed up to one order of magnitude higher permeabilities than the SG and SP. However, SG and SP have about 1.3 and 2.6 times the electrical and thermal conductivity of SPB and CL, respectively. Furthermore, the properties of SPB and CL are largely affected by the surface area density, whereas tortuosity variation does not impact permeability and conductivity to a major extent. Finally, empirical relations are adapted to describe the presented data and thus, they may enable future designers of TPMS based porous structures to fine-tune the geometries according to the requirements on permeability and electrical as well as thermal conductivity. KW - Metals and Alloys KW - Surfaces, Coatings and Films KW - Biomaterials KW - Ceramics and Composites PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-585250 DO - https://doi.org/10.1016/j.jmrt.2023.09.242 SN - 2238-7854 VL - 27 SP - 585 EP - 599 PB - Elsevier B.V. AN - OPUS4-58525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bock, Robert A1 - Mair, Georg W. A1 - Tiebe, Carlo A1 - Melzer, Michael A1 - Klaus, Christian A1 - Nattuveettil, Keerthana A1 - Engel, Thomas A1 - Prager, Jens T1 - Eine digitale QI für technische Anlagen: Beispiel Wasserstofftankstelle (H2) N2 - Mit der Initiative QI-Digital werden völlig neue Perspektiven für das Sicherheitsmanagement und die Qualitätssicherung technischer Anlagen erschaffen. Unsere Forschung im Kontext einer Wasserstofftankstelle zeigt, wie digitale Innovationen und Verfahren die Herausforderungen effizienter und verlässlicher Qualitätssicherung für komplexe Anlagen bewältigen können. In diesem Vortrag werden Potentiale und Beispiele der digitalen QI für technische Anlagen demonstriert und diskutiert: Moderne Anlagenüberwachung mit digitalen Zwillingen und KI sowie Kalibriermanagement mithilfe digitaler Kalibrierscheine und elektronischem Siegel. T2 - 2. QI Digital Forum CY - Berlin, Germany DA - 10.10.2023 KW - Wasserstoff KW - Sensorik KW - Qualitätsinfrastruktur KW - Digitalisierung KW - Druckspeicher KW - Verwaltungsschale PY - 2023 AN - OPUS4-58599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bock, Robert T1 - Pilotprojekt Wasserstofftankstelle - Session 2: Verlässliche Wassertofftankstellen N2 - Was ist QI? Qualitätsinfrastruktur – Das Zusammenwirken von nationalen Institutionen im Bereich der Metrologie, Normung und Standardisierung, Akkreditierung, Konformitätsbewertung und Marktüberwachung, mit dem Ziel die Qualitätssicherung bei Produkten und Prozessen in Deutschland zu gewährleisten. Unser Ziel ist es, unsere bewährte Qualitätsinfrastruktur (QI) noch besser zu machen und so einen Beitrag zur Lösung von sozioökonomischen, ökologischen und technologischen Herausforderungen unserer Zeit zu leisten. Eine der bedeutendsten technologischen Herausforderungen unserer Zeit ist die Digitalisierung. Die zentralen Akteure der deutschen QI wollen diese digitalisieren. Beteiligte Institutionen sind aktuell BAM (Konformitätsbewertungen in bestimmten Bereichen), DAKKS (Akkreditierung), DIN/DKE (Normung), PTB (Metrologie). Wir wollen also ein Reallabor errichten, das die Wertschöpfungskette einer Tankstelle abbildet, also eine Wasserstofftankstelle beinhaltet, die dann mit erweiterter Sensorik ausgestattet werden soll. Somit sollen digitale Prozesse abgebildet werden können sowie sensorgestützte Verfahren zur qualitätsgesicherten Datenerfassung und -auswertung genutzt werden. Diese gesammelten Daten sollen dann in eine Dateninfrastruktur eingehen und mithilfe eines Datenmanagementsystems sowie künstlicher Intelligenz in einem Digitalen Zwilling zusammenlaufen, der die digitale Prozessüberwachung der Sicherheit möglich macht. Schließlich sollen die in QI Digital entwickelten digitalen Strukturelemente der QI erprobt werden, insbesondere die QI Cloud, Smart Standards und digitalen Zertifikate. Im Zusammenspiel ermöglicht das unter anderem die Entwicklung von Predictive Maintenance Verfahren für: 1. die Optimierung von Wartungszyklen und Minimierung von Ausfallzeiten Erhöhung der Betriebssicherheit durch frühzeitige Identifikation kritischer Zustände im Gesamtsystem 2. Entwicklung verlässlicher Qualitäts- und Sicherheitsstandards  3. Digital-gestützte Risikobeurteilung und Konformitätsbewertung Die im Pilotprojekte betrachteten Sicherheitsaspekte sind also zusammenfassbar als: a) Auswirkungsbetrachtungen bei möglichen Fehlfunktionen oder Defekten b) Die genannte vorrauschauende Instandhaltung und damit verbundene Lebensdauerprognose, die in Kombination eine bessere allgemeine Verfügbarkeit garantieren sollen Als Grundlage hierfür benötigen wir aber Änderungen im Bereich der technischen Regeln und Normen, um die neuen digitalen Werkzeuge zuzulassen und nutzbar zu machen. T2 - QI Forum 2022 CY - Berlin, Germany DA - 11.10.2022 KW - Wasserstoff KW - Qualitätsinfrastruktur KW - Digitalisierung PY - 2022 AN - OPUS4-61356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orellana Pérez, Teresa T1 - QI Digital Use Case Hydrogen Refueling Station N2 - BAM is part of the “Quality Infrastructure Digital” (QI Digital) initiative of the German Federal Ministry for Economic Affairs and Climate Action (BMWK). This initiative aims at coordinating a large cooperation project, “QI Digital” for making German and European quality management systems fit for the digital transformation. It is a fact that the digitization of new products and services is occurring much faster than quality management systems can be accordingly updated. Thus, the digital transformation of quality management is necessary to preserve the competitiveness of the German and European industries that stand for quality and safety in the global market. The Use Case “Reliable Hydrogen Refueling Station” of QI Digital aims at creating new solutions that are transferable to other technical systems and at further developing standards and technical rules as a contribution to technology transfer and innovation. T2 - 4th German-Korean Hydrogen Conference CY - Seoul, Republic of Korea DA - 31.10.2023 KW - Hydrogen refueling station KW - Digital quality infrastructure PY - 2023 AN - OPUS4-59303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bock, Robert A1 - Mair, Georg W. T1 - Pilotprojekt "Verlässliche Wasserstofftechnologie" - Beispielanwendung für eine technische Anlage N2 - Kurzvorstellung des Pilotprojektes Verlässliche Wasserstofftechnologie in QI Digital. Anwendung der QI Digital Werkzeuge an einer technischen Anlage beispielhaft gezeigt anhand von sechs im Projekt entwickelten Demonstratoren. Unser erklärtes Ziel ist die Unterstützung des Markthochlaufs von Wasserstofftechnologien durch Digitalisierung der QI. Bei der Qualitätsinfrastruktur von technischen Anlagen geht es vor allem die Themen QI Dokumentation und Zugänglichkeit, Verfügbarkeit der Anlage und Informationen darüber, sowie Inspektionszyklen mit zeitaufwändigen und teuren manuellen Prüfungen. Mit dem Übergang zu einer digitalen QI streben wir hier an, eine kontinuierliche Überwachung des momentanen Gesundheitszustandes der Anlage und automatisierter Dokumentation hierüber, die fälschungssicher und vertraulich zugänglich gemacht werden kann, zu erreichen. Hierzu sollen die im Gesamtprojekt entwickelten QI Digital Werkzeuge zum Einsatz kommen. T2 - QI Forum 2024 CY - Berlin, Germany DA - 09.10.2024 KW - Wasserstoff KW - Qualitätsinfrastruktur KW - Digitalisierung PY - 2024 AN - OPUS4-61354 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kehr, Torsten T1 - Project QI-Digital - Quo vadis Use Case H2 Refueling Station? N2 - As a part of the QI-Digital cooperation project, BAM is setting up a hydrogen refuelling station research platform at the Test site for Technical Safety in Horstwalde. Based on this platform, BAM intends to develop, to test and to optimize new measurement techniques as well as data acquisition and processing methods for hydrogen refuelling stations and their periphery in close cooperation with partners from the quality infrastructure and industry. The presentation will introduce the hydrogen refuelling station use case and provide insights into the issues and research goals of the associated subprojects. T2 - H2-Colloquium of the Competence Centre „H2SAFETY@BAM” CY - Online meeting DA - 16.02.2022 KW - Hydrogen KW - Safety KW - QI-Digital PY - 2022 AN - OPUS4-54361 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - Aspekte einer digitalen Lebenslaufakte (Impulsvortrag) N2 - Durch Einsatz neuer Technologien im Transport von komprimiertem Wasserstoff konnte eine Verdreifachung des Nutzlastverhältnisses erreicht werden. Diese neuen Speicher auf den Transportfahrzeugen müssten aber anders auf ihre Sicherheit überprüft werden, als dies heute gefordert wird. Mit dem Markthochlauf Wasserstoff vervielfacht sich zudem die Anzahl der Transporteinheiten. Da sich im Zuge der neuen H2-Transportfahrzeuge aber auch die Anzahl der einzelnen Speicher pro Fahrzeug etwa verzwanzigfacht hat, kommen die Kapazitäten für die erforderliche wiederkehrende Prüfung an ihre Grenzen. Dies könnte evtl. durch eine entsprechende Erhöhung der Prüfkapazitäten gelöst werden. Da dies aber weder praktisch machbar ist noch technisch wirklich sinnvoll, müssen alternative Ansätze z.B. durch digital erfasste zerstörungsfreie Prüfkonzepte gesucht werden. Hierzu bedarf es aber einer Lebenslaufakte, die beginnend von der Definition einer Bauweise über die Baumusterprüfung, Zulassung, Herstellung, erstmalige Prüfung, Verwendung und wiederkehrenden oder begleitenden Prüfungen bis zum Verschrotten alle Daten erfassen und verwalten kann. Eine solche Lebenslaufakte könnte auch als eine Art digitaler Produktpass (DPP) verstanden werden. T2 - QI-digital Forum 2023 CY - Berlin, Germany DA - 10.10.2023 KW - Wasserstoffspeicher KW - Lebenslaufakte KW - Digitaler Produktpass DPP KW - Wiederkehrende Prüfung KW - Lebensdauerüberwachung PY - 2023 AN - OPUS4-58559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Perrone, Luca Pakj A1 - Cozzani, Valerio A1 - Otremba, Frank A1 - Seidlitz, Holger T1 - Study the impact of spacer at thermal degradation process of MLI-based insulation in fire condition N2 - To reduce CO2 emissions, energy carriers such as hydrogen are considered to be a solution. Consumption of hydrogen as a fuel meets several limitations such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquified phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Different studies have been addressed the vulnerability of such insulation against high thermal loads e.g., in an accident engaging fire. Some of research works have highlighted the importance of considering the MLI thermal degradation focusing on its reflective layer. However, limited number of studies addressed the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed that, as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Each individual spacer contributes to mitigating the radiative energy received by the measurement plate. Stacks of 20–50 spacers (this is the number of layers in commercial MLI systems applied for liquid hydrogen applications) can potentially reduce the thermal radiation by 1–2 orders of magnitude. An empirical correlation to predict a heat flux attenuation factor is proposed, which is useful for further numerical and analytical studies in the temperature range from ambient to 300 ◦C. KW - Cryogenic KW - Liquid Hydrogen KW - Multi-Layer Insultation KW - Heat Transfer KW - Hydrogen Storage Safety PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614919 DO - https://doi.org/10.1016/j.jlp.2024.105461 SN - 0950-4230 VL - 92 SP - 1 EP - 7 PB - Elsevier Ltd. AN - OPUS4-61491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scarponi, Giordano T1 - Numerical Simulation Of Cryogenic Liquid Hydrogen Tanks With Multilayer Insulation Exposed to Fire N2 - In the ongoing energy transition, hydrogen has emerged as a promising alternative energy carrier with a reduced environmental impact. Among the possible solutions to store hydrogen onboard vehicles, cryogenic tanks equipped with multilayer insulation (MLI) appear to be one of the most effective in ensuring high volumetric energy density. MLI systems consist of several layers of low-emissivity material (radiative layers), typically aluminum or aluminum-coated polyester, interleaved with low thermal conductivity spacers to avoid direct contact between the radiative layers. In cryogenic tank applications, these are enclosed within the vessel double-walled shell, working under high-vacuum conditions. Among the insulation systems available nowadays, MLI-based ones have the smallest volume requirements and the lowest weight. Thanks to these features, MLI appears as the preferable choice in sectors where space and weight constraints play a crucial role (e.g., in the transportation sector). The widespread deployment of LH2 new technologies poses also challenging questions related to the hazardous properties of hydrogen. The accidental loss of integrity of cryogenic LH2 tanks might lead to extremely dangerous phenomena, such as Boiling Liquid Expanding Vapour Explosions (BLEVE), Fireball, and Rapid Phase Transition (RPT). One potential scenario that could give rise to this situation is exposure to an external heat source such as a fire triggered by a road accident. Real-scale fire test results suggest that the insulation performance of MLI systems may undergo severe degradation when these are subjected to high temperatures, leaving the tank almost unprotected and leading to failure in a relatively short time. In this framework, the availability of models able to simulate the tank response to fire exposure is crucial to ensure a safe design and support emergency response planning. Several CFD and lumped models originally developed for pressurized and atmospheric tanks were extended to cryogenic vessels. However, these provide results in line with experimental data only if the insulation system's equivalent thermal conductivity is fine-adjusted to higher values with respect to normal operating conditions. These models do not integrate, in fact, the description of MLI thermal degradation as a result of fire exposure, which was demonstrated to play a crucial role in determining the response of the cryogenic liquid hydrogen tank. On the other hand, MLI heat transfer models currently available in the literature are suitable for normal operative conditions only and do not address the material behavior under fire exposure. This work presents an innovative lumped model to simulate the thermal response of MLI-insulated cryogenic hydrogen tanks in fire scenarios. In particular, the proposed approach enables the prediction of MLI loss of insulation performances due to fire-induced thermal degradation, overcoming the limitations of currently available models. The MLI degradation model is based on the well-established layer-by-layer approach and integrated with sub-models to estimate the material deterioration due to thermal load. Several sub-models were defined to account for different MLI materials. In particular, for polyester-based MLIs, the deterioration of each layer is defined by the apparent kinetic of thermal degradation retrieved from Thermo-Gravimetric-Analysis (TGA) tests. For aluminum-based MLI, each radiation layer is assumed to vanish when its temperature reaches the melting point of the material. The model was applied to several case studies addressing different types of MLI (i.e., both polyester-based and aluminum-based ones) and fire scenarios to assess the effect on the heating rate and pressure build-up of the tank lading. The analysis allowed for the performance comparison of the studied MLIs, providing valuable information to support the emergency management of accidental scenarios involving liquid-hydrogen cryogenic tanks. Moreover, the results obtained can be used to define mitigation measures to protect the integrity of cryogenic tanks equipped with MLI. T2 - Spring24+20thGCPS CY - New Orleans, Louisiana, USA DA - 24.03.2024 KW - Multilayer Insulation KW - Fire KW - Hydrogen KW - Liquefied Natural Gas KW - Insulation PY - 2024 AN - OPUS4-61078 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - Risk management and consequence control in hydrogen transport - volume dependent pressure limitation as a scientific approach for consequence control N2 - With technological development, the transport units for compressed gases are becoming larger and their number is increasing. Simultaneously, the filling pressure for hydrogen in transport has increased far beyond the 200 bar, which has been the common European standard for decades. In total, this increases the potential consequences of an incident, which needs to get limited for ensuring acceptance in current practice with pressure vessels from large serial production. Consequently, the measures for new developments of extremely large and highly pressurised pressure vessels should meet a risk based higher level of requirements. For this purpose, the so-called pressure-volume product was proposed as a safety related criteria to the relevant regulatory bodies in 2020. The approach was accepted, and a working group was set up at the United Nations for developing a broadly accepted limitation of today's established pressure vessels compared to future units with even more gas content. The path to the finally decided limit value of 1.5 million bar litres is presented here for hydrogen with its individual steps: ‘Boundary between major accident and disaster’, ‘The effect of pressure waves on the human body’, ‘The propagation of pressure waves’, ‘The reference value for population density’ and ‘Impact of pressure waves’. This result of the UN working group has been accepted in December 2023 and will lead to a binding limitation of the pressure volume product for the so called pressure receptacles by 2027. The work on units larger than this pV-limit is going on at ISO level. T2 - 11th International Conference on Hydrogen Safety ICHS 2025 CY - Seoul, South Korea DA - 22.09.2025 KW - Safety KW - Hydrogen transport KW - Major accident KW - Pressure wave KW - Population density KW - Science with impact PY - 2025 AN - OPUS4-64198 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Forschung der BAM zu Lithiumbatterien: Schwerpunkt Anwendungsebene N2 - Für den Transport von Lithiumbatterien als Gefahrgut sind Kenntnisse über deren Verhalten und möglichen Schutz in Form von Verpackungen essentiell. Die aktuellen Forschungsergebnisse der BAM der letzten 2 Jahre werden dem Fachpublikum vorgestellt. T2 - BAM Erfa Verpackungen CY - Berlin, Germany DA - 17.09.2024 KW - Lithiumbatterien KW - Gefahrguttransport KW - Gefahrverpackungen PY - 2024 AN - OPUS4-62332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Camplese, Davide T1 - Safety assessment of MLI super-insulation systems for cryogenic liquid-hydrogen tanks in fire scenarios N2 - In the context of green energy transition, cryogenic tanks featuring MLI systems are emerging as a leading solution to store hydrogen in heavy-duty vehicles. However, the integrity of such tanks can be jeopardized by fire. In such a scenario, MLI materials degradation can occur, leaving the tank unprotected from the fire heat flux, with consequent rapid pressurization and a high risk of failure. This study presents an assessment of aluminum-based MLI for liquid hydrogen cryogenic tanks under fire exposure based on the estimation of the time to mechanical failure of the equipment. This is calculated through an innovative model that simulates the thermomechanical response of the tank, including the MLI thermal degradation and the pressure-relief valve (PRV) operation. The application to several case studies that consider a typical LH2 tank featuring a wide range of MLI configurations demonstrated the likelihood of failure in case of exposure to a hydrocarbon pool fire, providing also comprehensive insights into the impact of the insulation characteristics and operating conditions on the time to failure. T2 - 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - LH2 KW - Insulation KW - Tanks KW - Fire KW - LNG PY - 2025 AN - OPUS4-63427 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Modelling Fire Response of Cryogenic Liquid Hydrogen Tanks Equipped with Multilayer Insulation (MLI) Systems N2 - In the context of the growing global interest in hydrogen-based green energy, cryogenic tanks equipped with multi-layer insulation (MLI) are emerging as a leading solution for storing hydrogen in vehicles. The integrity of these systems might be threatened during fire exposure. This can trigger the degradation of the MLI materials and induce rapid pressurization of the tank with a high risk of catastrophic failure. In this work, a novel lumped model to simulate the thermal response of MLI-equipped cryogenic liquid hydrogen tanks is presented. The model integrates the accurate database “Coolprop” for hydrogen thermodynamic properties and sub-models for detailed simulation of MLI degradation, providing a realistic simulation of the experimental data obtained under normal operating conditions. The application of the model to several case studies considering different numbers of MLI layers and tank geometries demonstrates that aluminum-based MLI offers scarce protection in case of exposure to a hydrocarbon poolfire. T2 - CISAP 11 CY - Neapel, Italy DA - 15.09.2024 KW - LH2 KW - LNG KW - Cryogenic storage tank KW - Insulation KW - MLI PY - 2024 DO - https://doi.org/10.3303/CET24111076 SN - 2283-9216 VL - 111 SP - 451 EP - 456 PB - AIDIC The Italian Association of Chemical Engineering AN - OPUS4-61384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank ED - Di Benedetto, Almerinda T1 - Experimental Research Of A Tank For A Cryogenic Fluid With A Wall Rupture In A Fire Scenario N2 - In the course of decarbonizing the energy industry, cryogenic energy carriers as liquefied hydrogen (LH2) and liquefied natural gas (LNG) are seen as having great potential. In technical applications, the challenge is to keep these energy carriers cold for a long time. This is achieved in the road transport sector and also stationary applications by thermal super insulations (TSI) which based on double-walled tanks with vacuum and multilayer insulation (MLI) in the interspace. This study focuses on the behaviour of widely used combustible MLI in a fire scenario, at vacuum and atmospheric pressure conditions. The former corresponds to the typical design condition and the latter to the condition after an outer hull rapture of a tank. Furthermore, two fire scenarios were taken into account: a standard-oriented approach and a hydrocarbon fire-oriented approach. For the study, a test rig was applied that allows testing of TSI at industrial conditions and subsequent analysis of TSI samples. The test rig allows thermal loading and performance analysis of TSI samples at the same time. Comparing the tests, the samples degraded differently. However, no sudden failure of the entire MLI was observed in any test. These results are relevant for the evaluation of incidents with tanks for the storage of cryogenic fluids and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - 15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE) CY - Neapel, Italy DA - 10.06.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank KW - Fire KW - Thermal insulation KW - Multi-Layer Insulation PY - 2024 SP - 707 EP - 717 AN - OPUS4-60460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - A comparative study on insulation materials in tanks for the storage of cryogenic fluids in fire incidents N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. The focus of this study is to investigate the behavior of different types of TSI when exposed to a heat source that represents a fire. Therefore, a High-Temperature Thermal Vacuum Chamber (HTTVC) was used that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this study, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for the evaluation of accident scenarios, the improvement of TSI, and the development of emergency measures. T2 - IMECE 2023 CY - New Orleans, Louisiana, USA DA - 29.10.2023 KW - LH2 KW - LNG KW - Fire PY - 2023 SP - 1 EP - 7 AN - OPUS4-58768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Scarponi, Giordano T1 - Performance of MLI systems for LH2 Tanks in fire scenarios N2 - In the course of decarbonizing the energy industry, cryogenic energy carriers are seen as having great potential. This is because they allow significantly higher volumetric energy densities to be achieved than when these energy carriers are stored at typical temperatures on Earth. This is important for numerous energy-intensive applications, such as those found in all transport sectors. Important cryogenic energy carriers include liquefied hydrogen (LH2) and liquefied natural gas (LNG). The challenge is to keep the energy carrier cold for a long time. This is achieved by the implementation of thermal super-insulations (TSI) systems based on multilayer insulations (MLI), microspheres, perlites, and vacuum for instance, and which have proven to be effective in several cryogenic applications. However, due to the short period of use, the low number of documented incidents, and the still few investigations carried out in the field, the exploitation of such systems in the transport sector still suffers from insufficient knowledge about the course and consequences of incidents. Accidents involving collisions, fires, and their combination are quite common in the transportation sector and may generate extraordinary loads on the tank and its insulation system, eventually leading to tank failure. The presentation summarizes the findings from the cooperation of the University of Bologna and BAM regarding the experiments on diverse types of super-insulations with the High Temperature Thermal Vacuum Chamber, as well as the model approaches that were developed to calculate the heat transfer and degradation of MLI’s during high thermal exposure. As an outlook the application of the models, the Cryogenic High Temperature Thermal Vacuum Chamber, and the fire test on HGV-components are presented. T2 - ELVHyS - International Stakeholder's Seminars CY - Bologna, Italy DA - 30.09.2024 KW - LH2 KW - LNG KW - Cryogenic storage tank KW - Fire KW - Safety PY - 2024 AN - OPUS4-61205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Camplese, Davide T1 - Modelling Fire Response of Cryogenic Liquid Hydrogen Tanks Equipped with Multilayer Insulation (MLI) Systems N2 - In the context of the growing global interest in hydrogen-based green energy, cryogenic tanks equipped with multi-layer insulation (MLI) are emerging as a leading solution for storing hydrogen in vehicles. The integrity of these systems might be threatened during fire exposure. This can trigger the degradation of the MLI materials and induce rapid pressurization of the tank with a high risk of catastrophic failure. In this work, a novel lumped model to simulate the thermal response of MLI-equipped cryogenic liquid hydrogen tanks is presented. The model integrates the accurate database “Coolprop” for hydrogen thermodynamic properties and sub-models for detailed simulation of MLI degradation, providing a realistic simulation of the experimental data obtained under normal operating conditions. The application of the model to several case studies considering different numbers of MLI layers and tank geometries demonstrates that aluminum-based MLI offers scarce protection in case of exposure to a hydrocarbon poolfire. T2 - CISAP 11 CY - Neapel, Italy DA - 15.09.2024 KW - Liquefied hydrogen KW - LNG KW - Fire KW - Insulation KW - MLI PY - 2024 AN - OPUS4-61389 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Storages For Cryogenic Gases And Their Safety Part 1 N2 - To accelerate the hydrogen uptake in Europe the project KICstartH2 funded by the European Union arranged the Joint European Summer School (JESS) that deals with several topics around hydrogen. A topic in this framework is the transport and storage of energy by hydrogen. Here cryogenic energy carriers are seen as having great potential. This is because they allow significantly higher volumetric energy densities to be achieved than when these energy carriers are stored at typical temperatures on Earth. This is important for numerous energy-intensive applications, such as those found in all transport sectors. Important cryogenic energy carriers include liquefied hydrogen (LH2) and liquefied natural gas (LNG). This presentation focuses on the physical parameters and methods relevant to the storage of cryogenic fluids. T2 - Joint European Summer School (JESS) CY - Athens, Greece DA - 15.09.2024 KW - Liquefied hydrogen KW - Liquefied natural gas KW - Cryogenic storage tank PY - 2024 AN - OPUS4-61083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar T1 - Investigation of Super Insulation degradation of a tank for cryogenic goods. Effect of fire on the storage of Cryogenic fluids N2 - Cryogenic liquefied gases, such as liquid hydrogen (LH2) and liquefied natural gas (LNG), are becoming more popular as eco-friendly energy sources. However, using these gases more often increases the risk of accidents, making it important to conduct thorough risk assessments. The storage systems for these gases rely on thermal superinsulation (TSI), which can fail under extreme heat, especially during fires. Therefore, it is essential to study how and why TSI fails. This research (part of PhD topic) aims to examine insulation performance, thereby improving the overall safety of cryogenic storage systems. T2 - Colloquium of Departement 3 CY - Berlin, Germany DA - 27.05.2024 KW - Investigation KW - Insulation degradation KW - Tank for cryogenic goods PY - 2024 AN - OPUS4-60462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Novel Insulation Concepts for Large Scale Liquefied Hydrogen Storages N2 - The NICOLHy project aims to develop a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy efficient storage of large quantities of LH2. Such large scale LH2 storage technology is necessary for establishing a hydrogen economy with dimensions between 40.000 m³ and more than 200.000 m³ of LH2. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting the up-scaling are the long production time due to the process chain, the low failure tolerance and the spherical shape, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost efficient while production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The presentations shows details to the concept and presents several safety concerns the project has to deal with. T2 - ELVHyS - International Stakeholder's Seminars CY - Bologna, Italy DA - 30.09.2024 KW - LH2 KW - Insulation KW - Safety PY - 2024 AN - OPUS4-61208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn T1 - Characterisation of vacuum insulation panel based cryogenic insulation N2 - Current medium to large scale hydrogen storage tanks utilize a double walled tank with vacuum and a low thermal conductivity powder as bulk fill between the two tank walls. This approach offers poor failure resistance and is not economic to build at a large scale. In NICOLHy an alternative cryogenic insulation concept using vacuum insulation panels (VIP) targeted for tanks with capacities from 40 000 m³ to 100 000 m³ is in research. VIPs consist of a gas tight envelope that surrounds a low conductivity core material. Within the envelope, a vacuum is created, which supresses convective heat transfer. Since the core material is typically very low thermal conductivity, while the envelope material has a relatively high thermal conductivity, thermal bridges where two adjoining panels meet cannot be avoided. Modeling of the thermal behaviour of VIPs exists for the building industry, but not for cryogenic temperatures or applications with multiple layers of VIPs, both of which present a new challenge. Here, these challenges and goals for the thermal modeling within the project are presented, alongside an overview over the project itself. T2 - Themenvorstellung beim BTU Arbeitsgebiet Technische Akustik CY - Cottbus, Germany DA - 23.09.2024 KW - Liquefied Hydrogen PY - 2024 AN - OPUS4-61122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grotelüschen, Frank A1 - Eberwein, Robert A1 - Berhorst, Ralf T1 - Supertanker für H2: EU-Projekt konstruiert günstigen Riesenspeicher N2 - Wasserstoff stellt einen potenziellen Energieträger für den großskaligen Import von Energie nach Europa dar. Von seinen verschiedenen Speicherformen eignet sich hierfür insbesondere verflüssigter Wasserstoff, mit dem sich auf gleichem Volumen deutlich mehr Energie speichern lässt als bei der druckbasierten Speicherung. Verflüssigter Wasserstoff wird bei minus 253°C gespeichert und muss für dessen Transport lange bei dieser niedrigen Temperatur gehalten werden. Dies stellt besondere Herausforderungen an die thermische Isolation von Tanks. Der Erforschung nachhaltiger, kosten- und energieeffizienter sowie sicherer thermischen Isolationen wird im NICOLHy Projekt, unter Leitung der BAM, nachgegangen. KW - Verflüssigter Wasserstoff KW - Thermische Isolation PY - 2024 UR - https://www.deutschlandfunk.de/supertanker-fuer-h2-eu-projekt-konstruiert-guenstigen-riesenspeicher-dlf-d50ff14a-100.html PB - Deutschlandradio CY - Hamburg AN - OPUS4-60538 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harwege, Finn A1 - Eberwein, Robert T1 - Testing of vacuum insulation panels for liquefied hydrogen storage tanks N2 - For the future use of liquefied hydrogen (LH2) as a green energy carrier, new concepts for storage tanks and in particular their insulation are necessary. The methodology applied in current LH2 tanks has some disadvantages while manufacturing and operation of large tanks that may be required in the future. While liquefied natural gas tanks exist in the necessary capacities, they are incompatible with LH2 due to its significantly lower storage temperature. In this paper, the possibility of using vacuum insulation panels (VIPs) as an alternative to the conventional double walled, powder filled vacuum insulation is presented. The two systems are introduced and compared on a conceptual level with a focus on the loss of vacuum failure mode. Furthermore, a test rig that enables the testing and quantification of thermal properties of VIP based insulations in ordinary and loss of vacuum conditions is presented. The test rig is a boil-off calorimeter using liquefied nitrogen and features a square cold surface with a side length of 3 m. An overview over the planned testing and its goals is given. KW - Liquefied Hydrogen KW - Insulation KW - Vacuum Insulation Panel KW - LH2 KW - Cryogenics PY - 2025 DO - https://doi.org/10.3303/CET2511612 SN - 2283-9216 VL - 2025 IS - 116 SP - 769 EP - 774 PB - AIDIC CY - Milano, Italy AN - OPUS4-63716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Chianese, Carmela A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Modeling the performance of multilayer insulation in cryogenic tanks undergoing external fire scenarios N2 - Multilayer Insulation (MLI) is frequently used in vacuum conditions for the thermal insulation of cryogenic storage tanks. The severe consequences of the degradation of such materials in engulfing fire scenarios were recently evidenced by several large-scale experimental tests. In the present study, an innovative modelling approach was developed to assess the performance of heat transfer in polyester-based MLI materials for cryogenic applications under fire conditions. A specific layer-by-layer approach was integrated with an apparent kinetic thermal degradation model based on thermogravimetric analysis results. The modeling results provided a realistic simulation of the experimental data obtained by High-Temperature Thermal Vacuum Chamber tests reproducing fire exposure conditions. The model was then applied to assess the behavior of MLI systems for liquid hydrogen tanks in realistic fire scenarios. The results show that in intense fire scenarios degradation occurs rapidly, compromising the thermal insulation performances of the system within a few minutes. KW - Multilayer Insulation KW - Cryogenic Vessels KW - Liquefied Hydrogen KW - Liquefied Natural Gas KW - Safety KW - Fire PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599418 DO - https://doi.org/10.1016/j.psep.2024.04.061 SN - 0957-5820 VL - 186 SP - 1169 EP - 1182 PB - Elsevier B.V. AN - OPUS4-59941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Anita T1 - Irrungen, Wirrungen und Lichtblicke - Überarbeitung des Gefahrguttransportrechts für Lithium- und Natrium-Ionen-Batterien N2 - Die Überarbeitung des Gefahrgutrechts hinsichtlich der Einstufung von Lithium- und Natrium - Ionen Batterien nach Gefährlichkeit trägt so einige Stilblüten - wie zuletzt den Vorschlag von 135 neuen UN Nummern für Lithiumbatterien. Die BAM trägt mit ihrer Kompetenz aus eigenen Untersuchungen und Forschung dazu bei, dass die deutsche Delegation bei den Vereinten Nationen, wo die Regelwerke weiterentwickelt werden, gezielte Vorschläge einbringen kann. Der Artikel beschreibt die aktuellen Entwicklungen. KW - Lithiumbatterien KW - Gefahrguttransport KW - Regelwerksentwicklung PY - 2024 VL - 2024 IS - 6 SP - 29 EP - 32 PB - Verkehrs-Verlag J. Fischer GmbH & Co. KG CY - Düsseldorf AN - OPUS4-62334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Giannakopoulos, Antonios E. A1 - Zisis, Athanasios A1 - Zervaki, Anna D. A1 - Dimopoulos, Christos D. A1 - Platypodis, Efstathios A1 - Eberwein, Robert T1 - Effective elastic moduli and failure mechanisms of a random assembly of thin walled glass microbubbles N2 - In this work a methodology is presented to estimate the elastic properties and failure mechanisms of an assembly of random, brittle microbubbles. The approach is based on the mechanics of frictionless micro-contact between hollow spherical shells by employing relations from classical shell theory and verified by two dimensional axisymmetric Finite Elements. The estimated values are in agreement with available experimental values. Moreover, a granular type analytical homogenization model provides an isotropic elastic constitutive law to be used for the macroscopic deformation of an assembly of glass micro-bubbles when it is compressed by external loads. In addition, approximate estimates are also proposed for two important micro-failure mechanisms of such assemblies that relate either to the splitting or to the buckling of a brittle spherical shell, prior its complete crushing. The results are novel and are expected to enhance the application of glass microbubbles directly in acute thermal insulation problems such as liquid hydrogen storage. KW - LH2 KW - Cryogenic Vessels KW - Insulation PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634354 DO - https://doi.org/10.1016/j.ijsolstr.2025.113528 SN - 0020-7683 VL - 320 SP - 1 EP - 11 PB - Elsevier BV CY - Amsterdam AN - OPUS4-63435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg W. A1 - Günzel, Stephan A1 - Saul, Herbert A1 - Bock, Robert T1 - Die volumenabhängige Druckbegrenzung als Maßnahme zur Konsequenzsteuerung im Wasserstofftransport N2 - Mit der technologischen Entwicklung werden auch die Transporteinheiten für Druckgase größer und die zu transportierenden Gase wie Wasserstoff deutlich über die lange als Standard geltenden 200 bar hinaus komprimiert. Damit steigt das Konsequenzpotenzial eines Zwischenfalls, das nun begrenzt werden soll, um die bisherige Praxis mit wenigen Zwischenfällen von den Maßnahmen für die neuen Entwicklungen extrem großer Transportdruckbehälter abgrenzen zu können. Hierzu wurde – ausgehend von einer technologisch und sicherheitstechnisch störenden Begrenzung des Volumens von Bergungsdruckgefäßen – das sogenannte Druck-Volumen-Produkt als Kenngröße und Konsequenzmaß vorgeschlagen. Um eine breit akzeptierte Abgrenzung der heute etablierten Druckgefäße gegenüber den zukünftigen Einheiten mit noch mehr Gasinhalt erarbeiten zu können, wurde eine Arbeitsgruppe bei den Vereinten Nationen eingerichtet, deren Weg zu ihrem Ergebnis „Einführung einer Obergrenze von 1.5 Mio. bar-Liter für das Druck-Volumen-Produkt von Druckgefäßen“ mit den Wasserstoff- spezifischen Einzelschritten „Grenze zwischen Großunfall und Katastrophe“, „Die Wirkung von Druckwellen auf den menschlichen Körper“, „Die Ausbreitung von Druckwellen“, „Der Referenzwert für die Bevölkerungsdichte“ und „Die Druckwellenberechnung“ hier dargestellt ist. Dieses Ergebnis der UN-Arbeitsgruppe wird bis 2027 zu einer verbindlichen Begrenzung des Druckvolumenproduktes in Druckgefäßen führen. KW - Risikosteuerung KW - Druck-Volumen-Produkt KW - Katastrophe KW - Bevölkerungsdichte KW - Druckwelle PY - 2024 SN - 2191-0073 VL - 14 IS - 05-06 SP - 8 EP - 17 PB - VDI Fachmedien GmbH & Co. KG CY - Düsseldorf AN - OPUS4-64309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sauer, Hannah A1 - Okpeke, Bright Ebikemefa A1 - Dzielendziak, Agnieszka Sylwia A1 - Batcke, Lars A1 - Eberwein, Robert A1 - Ehlers, Sören T1 - Comparative life cycle assessment of different vacuum insulation panel core materials for cryogenic storage tanks – with a focus on glass bubbles as a novel core material N2 - Developing a sustainable hydrogen supply chain is important in facilitating the energy transition towards climate neutrality. Hydrogen in its free form can be stored and transported either as a gas or a liquid. Due to gaseous hydrogen's comparatively low energy density, liquefied hydrogen (LH 2) is often preferred, especially with regard to long-distance transportation and storage in bulk. A notable challenge associated with LH2 is the inherent requirement to preserve it at a low temperature of -253°C. Consequently, the utilisation of thermally insulated tanks is necessary to minimise LH 2 evaporation. There is a lack of literature on the environmental impacts of insulation materials and concepts for cryogenic storage tank applications in the hydrogen supply chain. Hence, this study investigates a novel concept, namely vacuum insulation panels (VIPs), focusing on their core materials, with a view to assessing their environmental sustainability and circularity. A cradle-to-grave life cycle assessment (LCA) model is employed to investigate six distinct VIP core materials, namely, silica aerogel, rigid polyurethane foam, expanded perlite, glass fibre, fumed silica, and glass bubbles (hollow glass microspheres), with a special focus on the latter. The LCA results show that polyurethane foam and silica aerogel rank low in environmental performance, making them less suitable as primary choice. Expanded perlite is the most environmentally friendly material option, followed by glass fibre, glass bubbles, and fumed silica. Improvements to the environmental impact of glass bubbles can be achieved via the implementation of closed-loop recycling in their life cycle. T2 - The World Hydrogen Technologies Convention 2025 CY - Dublin, Ireland DA - 21.10.2025 KW - LH2 KW - Insulation KW - Life cycle assessment PY - 2025 UR - https://www.whtc2025.com/conference-proceedings SP - 65 EP - 67 AN - OPUS4-64668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Camplese, Davide A1 - Emrys Scarponi, Giordano A1 - Otremba, Frank A1 - Cozzani, Valerio A1 - Seidlitz, Holger T1 - A Comprehensive Numerical Study of the Behaviour of an LH2 Storage Tank in the Event of a Fire N2 - As the world moves towards green energy production, effective storage and transportation solutions become essential. To support this transition, energy carriers with minimal or zero environmental impact are required. Liquified hydrogen represents a promising candidate due to its emissions-neutral properties. However, its highly flammable nature necessitates adherence to strict safety codes and standards. Storing hydrogen often requires advanced super-insulation materials. To enhance the safety of cryogenic hydrogen storage tanks under extreme conditions, such as those encountered during fire accidents, it is crucial to understand the thermal behaviour of the tank. Predicting pressurization and potential failure in advance demands a robust and comprehensive model. However, still such models suffer lack of detailed heat transfer models which account for various sub-processes during an accident scenario. Hence, this study introduces a comprehensive model for the pressurization of cryogenic tanks equipped with multi-layer insulation (MLI) systemsin the event of fire, which comprises several sub-models. These sub-models account for heat transfer phenomena through the thermal insulation at nominal conditions and its thermal degradation during fire exposure, the fluid, the internal pressurization, and the performance of the pressure relief valve. This study provides valuable insights into the safety and the behaviour of hydrogen storage tanks under thermal loads. KW - Heat transfer KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen PY - 2025 DO - https://doi.org/10.3303/CET25116114 VL - 116 SP - 679 EP - 684 PB - AIDIC AN - OPUS4-63813 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Systeme mit tiefkalt verflüssigten Gasen in Brandereignissen N2 - Die volumetrische Energiedichte eines Gases kann durch Verflüssigung erhöht wer-den. Diese findet statt, wenn das Gas unter den Siedepunkt abgekühlt wird. Verflüs-sigte Gase mit großer Bedeutung für die Energiewende sind verflüssigter Wasser-stoff (LH2) und verflüssigtes Erdgas (LNG), dessen Verflüssigung Temperaturen von unter -160 °C bedarf. Systeme zur Speicherung dieser verflüssigten Gase müssen in der Regel für Überdrücke ausgelegt sein und benötigen thermische Superisolierun-gen (TSI), um die tiefkalten Bedingungen über längere Zeit halten zu können und Verluste durch Boil-Off gering zu halten. TSI mit Vakuum und MLI oder Perlit sind für viele Anwendungen mit LNG und LH2 geeignet. Bei solchen Systemen handelt es sich in der Regel um doppelwandige Strukturen, bei denen die Innenwand mit dem tiefkalten Fluid in Kontakt steht. Die Lücke, zwischen der Innen- und der Außen-wand befindet sich unter Vakuumbedingungen und enthält zudem MLI oder Perlite. Diese Kombination von Isolationsmethoden ermöglicht es auf kleinstem Raum sehr gute thermische Isolationswirkung zu erreichen. Aus wirtschaftlicher Sicht sind die Systeme gut durchdacht. Das Wissen über das Verhalten dieser Systeme bei einem typischen Ereignis wie einem Brand ist jedoch begrenzt. Dieses Wissen ist aber not-wendig, um die Sicherheit der wachsenden Zahl von Anwendungen auf dem Markt bewerten zu können. T2 - H2-Kolloquium des Kompetenzzentrum „H2Safety@BAM” CY - Online meeting DA - 04.07.2022 KW - Tiefkalt KW - Verflüssigt KW - Isolation KW - Auslegungsüberschreitend PY - 2022 AN - OPUS4-55178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank A1 - Seidlitz, Holger T1 - Non-combustible MLI based insulation behavior under fire condition - Experimental and numerical investigation N2 - The number of applications that demand zero-emission energy carriers, such as liquified hydrogen (LH2), is increasing worldwide. LH2 is typically transported or stored under cryogenic conditions. Storage in such conditions requires super thermal insulations which maintain very low boil-off for a prolonged time. Multi-Layer insulation (MLI) finds widespread use in cryogenic applications, designed to effectively restrict heat inleak towards cryogenic fluids. However, recent studies evidenced that exposure to high heat fluxes, such as in the event of a fire accident, can cause the thermal degradation of the insulation material, resulting in the severe collapse of its heat resistance performance. Therefore, the risk of rapid tank pressurization and its connection to the risk of BLEVE may be possible. This study proposes a numerical model to assess the performances of aluminum-based MLI materials under fire conditions. The model offers insights into the total heat transfer rate through the insulation, serving as a KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - CFD PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-617780 DO - https://doi.org/10.1016/j.psep.2024.11.037 VL - 193 SP - 603 EP - 620 PB - Elsevier B.V. AN - OPUS4-61778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. A1 - Hajhariri, Aliasghar T1 - A modular concept for protection against debris flight - Design, properties and usage N2 - With advances in technological development, stationary and mobile storage units for compressed hydrogen are becoming larger and larger. Their number is also increasing. At the same time, their design has evolved from steel and aluminium to pressure vessels made of composite materials. For safety reasons the design approval of those composite cylinders requires fire engulfment tests, which are mainly organised as open-air tests always needs dedicated protection measures. Under some conditions those protections measures even reduce the effort for organisational safety measures if e.g. the emission of splinters can get totally prevented. Another aspect is the improved reproducibility of fire tests by reducing the influence of wind, especially wind turbulence. Between 2017 and 2019, BAM developed a stackable protective frame made of steel to safely capture splinters for the safe execution of high-energy impact tests. However, this frame was not flexible enough for the follow up project, which led to a completely new protection concept for (potentially) destructive tests on gas-filled pressure vessels. This concept is based on very robust building blocks with knobs and holes of a dimension of 1m x 0.5m x 0.5m made from welded steel. Despite their considerable weight of around 500 kg, they can be combined and stacked very easily like ‘Lego bricks’. The presentation will show the flexibility of the concept, some results of tests on the robustness against pressure waves and the effectiveness in wind attenuation. Finally, the interaction with a new, also modular burner concept for localised fires and full engulfment fires will be presented. T2 - 11th International Conference on Hydrogen Safety ICHS 2025 CY - Seoul, South Korea DA - 24.09.2025 KW - Splinter protection KW - Pressure vessel testing KW - Fire engulfment KW - Destructive tests KW - Rupture KW - Gaseous tests KW - Pressure wave KW - Test equipment KW - Precaution measures PY - 2025 AN - OPUS4-65099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - Safety challenges of the hydrogen market ramp-up N2 - The presentation will provide some thoughts on the key safety challenges for staying safe during the market ramp-up phase of the rapidly expanding hydrogen economy. The focus is on storage aspects, but other topics are also covered. Each brief description of an aspect is followed by a proposal for solving the problem. Key words are safety aspects of hydrogen transport (CGH2 and LH2), risk control, consequence limitation, structural reliability control, safety monitoring through destructive and non-destructive testing, improvement of RCS through impact simulation, new approaches to safety assessment, outlook on the potential of NDT and digital product passports. T2 - 6th Germany–Korea Hydrogen Conference 2025 CY - Seoul, South Korea DA - 03.12.2025 KW - Risk-control KW - Regulatory measures KW - Operational safety KW - Mass transport KW - Full scale tests PY - 2025 AN - OPUS4-65102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Tugnoli, Alessandro A1 - Okpeke, Bright A1 - Campoari, Alessandro A1 - Zervaki, Anna T1 - NICOLHy - 2nd Stakeholder Advisory Board meeting N2 - The NICOLHy project aims to develop a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy efficient storage of large quantities of LH2. Such large scale LH2 storage technology is necessary for establishing a hydrogen economy with dimensions between 40.000 m³ and more than 200.000 m³ of LH2. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting the up-scaling are the long production time due to the process chain, the low failure tolerance and the spherical shape, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost efficient while production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The presentations shows details to the concept and presents several safety concerns the project has to deal with. This document contains all presentations from NICOLHys second Stakeholder Meeting. T2 - NICOLHy 2nd Stakeholder Meeting CY - Athens, Greece DA - 22.01.2025 KW - Liquefied hydrogen KW - Insulation KW - Tanks PY - 2025 AN - OPUS4-62564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, D. A1 - Scarponi, G. E. A1 - Cozzani, V. A1 - Otremba, Frank T1 - Insulation Materials Used in Tanks for the Storage of Cryogenic Fluids in Fire Scenarios N2 - The importance of tanks for storing cryogenic fluids in the energy industry is increasing because of ongoing political conflicts and the implementation of more environmentally friendly energy sources. Key representatives for the application of cryogenic tanks are natural gas in the form of Liquefied Natural Gas (LNG) and hydrogen, e. g. in the form of Liquefied Hydrogen (LH2), for which significantly higher transport capacities can be achieved with the same transport volume using cryogenic storages than with storages based solely on overpressure. What applies to all cryogenic transported fluids in common is their condition that must be maintained. Hence heat flows into the preserved fluid must be minimized. Thermal super Insulations (TSI) based on e. g. multilayer insulations (MLI), perlites, and vacuum are utilized for this purpose and have already proven themselves in similar applications. However, for the use of tanks for cryogenic fluids in the transport sector, there is insufficient knowledge regarding the course and consequences of incidents, which is due to the still short period of use and the few documented incidents, hence few investigations carried out in this field. Typical scenarios in the transport sector represent car accidents with collisions, fires, and their combination, which are associated with extraordinary loads on the tank. The focus of this study is to investigate the behavior of TSI as a result of their thermal exposure to a heat source representing a fire. It is worth mentioning that this could lead to an increase of the heat flux into a tank by several orders of magnitude, and to permanent damage of the TSI, ultimately rapid release of flammable gas as well as a Boiling Liquide Expanding Vapour Explosion (BLEVE). For this purpose, a high temperature thermal vacuum chamber (HTTVC) has been developed that allows thermal loading of MLI or perlites in a vacuum and simultaneous measurement of heat flow through this TSI. The HTTVC is designed to represent realistic insulation conditions and to withstand thermal loads from typical design fires. The HTTVC was applied to investigate TSI based on MLI and vacuum. It is shown that the thermal stress caused permanent damage to the TSI, with shrinkage, phase change, pyrolysis, and condensation being significant damage mechanisms. The results are relevant for the evaluation of accident scenarios and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - ASME 2023 Pressure Vessels & Piping Conference (PVP2023) CY - Atlanta, Georgia, USA DA - 16.07.2023 KW - LH2 KW - LNG KW - MLI KW - Fire PY - 2023 SP - 1 EP - 8 PB - ASME AN - OPUS4-57973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar ED - Eberwein, Robert ED - Perrone, Luca pakj ED - Cozzani, Valerio ED - Otremba, Frank ED - Seidlitz, Holger T1 - Study the Impact of Spacer at Thermal Degradation Process of MLI-based Insulation in Fire Condition N2 - To reduce carbon dioxide emissions, energy carries such as hydrogen consider to be a solution. Consumption of hydrogen as a fuel meets several restrictions such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquid phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Some studies have been revealed vulnerability of this type of insulation against high heat flux, for instance a fire accident. Some investigations have been depicted the importance of consideration of the MLI thermal degradation in terms of its reflective layer. However, limited number of studies have been focused on the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Moreover, the contribution of each individual spacer in all cases regarding the experimental temperature range is assessed to be around 8%. This value may increase to around 50% for glass paper and polyester spacers, and to around 25% for glass fleece spacers as the number of spacer layers increases up to six layers. To utilize the outcomes of the experiment later and integrate the results into numerical and CFD simulations, a model is proposed for the mentioned experimental temperature range up to 300°C to predict a heat flux attenuation factor. The model proposes a fitting factor that can reproduce the least square fitted line to the experimental data. T2 - 15th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions Naples (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Multi-Layer Insulation KW - Cryogenics KW - Liquid Hydrogen KW - Heat Transfer KW - Hydrogen Storage PY - 2024 SP - 744 EP - 755 AN - OPUS4-60461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Lh2 Tanks In Fire Incidents - The Cryogenic High Temperature Thermal Vacuum Chamber Enables In-Depth Insights N2 - Liquefied Hydrogen (LH2) and Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Their storage requires tanks with thermal super-insulations to keep them at cryogenic conditions for a long time. These insulation systems have proven itself in various applications over a long time. However, these insulations are still new in land transportation, where accidents involving collisions, fires, and their combination are to be expected. This study summarizes the results of the ongoing research program in which insulations commonly used in industry were analysed through experimental and numerical studies under fire-like conditions. It was found that there are strong differences among the various insulation systems. Several safety concerns and research gaps exists for layered insulations, which are typically used in land transport. To further analyse these insulation systems, a new test concept called Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC) was developed and manufactured. This concept enables the testing of large insulation samples under industrial conditions and the consideration of cryogenic conditions relevant for the investigation of various phenomena. The results are important for the evaluation of accident scenarios, the improvement of thermal super-insulations, and the development of emergency measures. T2 - IMECE 2024 CY - Oregon, Portland, USA DA - 17.11.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2024 SN - 978-0-7918-8869-8 SP - 1 EP - 7 PB - ASME AN - OPUS4-61751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, D. A1 - Chianese, C. A1 - Scarponi, G. A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, V. T1 - Analysis of high temperature degradation of multi-layer insulation (MLI) systems for liquid hydrogen storage tanks N2 - The interest in hydrogen-based green energy is increasing worldwide, and the same is true for hydrogen-powered vehicles. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) are the most promising to increase the amount of energy stored per unit volume. However, MLI is affected by severe deterioration when exposed to an external source of heat such as a fire following a car accident, leaving the tank unprotected and leading to failure in a relatively short time. In this work, a one-dimensional model to evaluate MLI thermal degradation when a liquid hydrogen tank is exposed to fire is presented. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis of several case studies. The results show that MLI systems performance depletes within a few minutes of exposure to hydrocarbon poolfire. T2 - ICheaP 16 CY - Naples, Italy DA - 21.05.2023 KW - LH2 KW - MLI KW - Tiefkalt KW - Fire KW - Tank PY - 2023 SN - 2283-9216 VL - 2023 SP - 1 EP - 6 PB - AIDIC Servizi S.r.l. AN - OPUS4-57584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Wasserstoff - Kryogene Anwendungen N2 - Wasserstoff wird als ein potenzieller alternativer Energieträger gesehen, mit dem die für 2050 gesetzten Klimaziele erreicht werden könnten. Der Transport von Wasserstoff ist mittels verschiedener Speichertechniken möglich, von denen der kryogene Transport mit den größten volumetrischen Energiedichten einhergeht. Hierdurch eignen sich diese Speicher besonders für die energieintensiven Verkehrsmittel im Land-, See- und Flugverkehr. Im Vortrag werden Speichertechniken, Gefahren im Umgang mit kryogenen Gasen sowie bisherige Störfälle dargestellt. Darauf aufbauend wird ein Teil der aktuellen Forschungsarbeit an der BAM vorgestellt, die die Sicherheit dieser Speicher unter außergewöhnlichen Belastungen adressiert. T2 - 26. Gefahrgutkongress Mecklenburg-Vorpommern CY - Rostock, Germany DA - 03.11.2022 KW - Wasserstoff KW - H2 KW - LNG KW - LH2 KW - Tank PY - 2022 AN - OPUS4-56181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Camplese, D. T1 - Analysis of high temperature degradation of multi-layer insulation (MLI) systems for liquid hydrogen storage tanks N2 - The interest in hydrogen-based green energy is increasing worldwide, and the same is true for hydrogen-powered vehicles. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) are the most promising to increase the amount of energy stored per unit volume. However, MLI is affected by severe deterioration when exposed to an external source of heat such as a fire following a car accident, leaving the tank unprotected and leading to failure in a relatively short time. In this work, a one-dimensional model to evaluate MLI thermal degradation when a liquid hydrogen tank is exposed to fire is presented. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis of several case studies. The results show that MLI systems performance depletes within a few minutes of exposure to hydrocarbon poolfire. T2 - ICheaP 16 CY - Naples, Italy DA - 21.05.2023 KW - LH2 KW - MLI KW - Fire KW - Tank PY - 2023 AN - OPUS4-57553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Tanks For The Large-Scale Transport And Storage Of Liquefied Hydrogen N2 - Hydrogen is seen as a potential energy source that enables us to achieve our climate targets. Hydrogen can be well integrated into the electrical energy infrastructure, and its production and use is free of direct GHG emissions. However, tanks are needed for worldwide storage and transportation, which need to be further developed and up-scaled. In the EU-funded NICOLHy project, BAM investigates a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy-efficient storage of large quantities of LH2. Such large-scale LH2 storage technology is necessary to build tanks with capacities of 40.000 m³ to more than 200.000 m³ of LH2, as it is in application for LNG today. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting up-scaling are the long production time due to the process chain, the low failure tolerance, and the spherical shape of the tank, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost-efficient during production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The NICOLHy consortium is ideally suited for this ambitious project. It brings together experts from the fields of thermodynamics, cryogenics, marine, chemistry, process, and safety engineering. Thereby, NICOLHy will accelerate the integration of hydrogen into the European energy economy and industry, which is necessary to be in line with the European Green Deal and to build trust of society in the policy and the technology. T2 - BAM Akademie H2 Safety - Colloquium CY - Berlin, Germany DA - 06.11.2024 KW - LH2 KW - Insulation KW - Liquefied Hydrogen KW - Tank PY - 2024 AN - OPUS4-61540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Systems for the storage of cryogenic liquefied gases N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. The presentation includes 2 main topics of the department. First TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. To analyze fire scenarios a High-Temperature Thermal Vacuum Chamber (HTTVC) was developed that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this chamber, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. In the presentation, the results are presented. Second, the studying of accident scenarios enables the improvement of thermal superinsulation and to find novel insulation concepts. This is necessary for LH2 large-scale storages, for which state-of-the-art solutions are not suitable. Within the presentation, a novel insulation concept will be presented. T2 - Specialist Meeting - Threats to HAZMAT Pressure Vessels and BLEVE CY - Berlin, Germany DA - 25.04.2023 KW - Crygenic KW - LH2 KW - LNG KW - Fire KW - MLI PY - 2023 AN - OPUS4-57414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - LH2 Tanks In Fire Incidents - The Cryogenic High Temperature Thermal Vacuum Chamber Enables In-Depth Insights N2 - Liquefied Hydrogen (LH2) and Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Their storage requires tanks with thermal super-insulations to keep them at cryogenic conditions for a long time. These insulation systems have proven itself in various applications over a long time. However, these insulations are still new in land transportation, where accidents involving collisions, fires, and their combination are to be expected. This study summarizes the results of the ongoing research program in which insulations commonly used in industry were analysed through experimental and numerical studies under fire-like conditions. It was found that there are strong differences among the various insulation systems. Several safety concerns and research gaps exists for layered insulations, which are typically used in land transport. To further analyse these insulation systems, a new test concept called Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC) was developed and manufactured. This concept enables the testing of large insulation samples under industrial conditions and the consideration of cryogenic conditions relevant for the investigation of various phenomena. The results are important for the evaluation of accident scenarios, the improvement of thermal super-insulations, and the development of emergency measures. T2 - IMECE 2024 CY - Portland, OR, USA DA - 17.11.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2024 AN - OPUS4-61752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Comparative performance assessment of multilayer insulation (MLI) systems for liquid hydrogen vessels in fire scenarios N2 - Multilayer Insulation (MLI) systems are a mature technology for cryogenic liquid hydrogen (LH2) tank thermal insulation. Recent tests evidenced that MLI materials may be damaged when exposed to fire, resulting in critical safety issues in the case of accidents. Thus, an innovative approach to the performance assessment of aluminum and polyester-based MLIs for LH2 tanks in fire scenarios was developed. A specific model integrating the hightemperature degradation of MLIs and the thermodynamic modeling of the tank lading was coupled to specific key performance indicators. Results of the analysis applied to a vehicle-scale tank equipped with 80 MLI layers indicate that MLI degradation and consequent tank failure may occur in less than 20 min for external shell temperatures above 1160 K in the presence of full engulfment, regardless of insulation used. Conversely, degradation does not occur earlier than 3600s below 603 and 928 K for polyester and aluminum-based MLI, respectively. KW - LH2 KW - LNG KW - Cryogenic storage tank KW - Fire KW - Insulation PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630841 DO - https://doi.org/10.1016/j.ijhydene.2025.04.534 SN - 0360-3199 VL - 135 SP - 537 EP - 552 PB - Elsevier Ltd. AN - OPUS4-63084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Camplese, Davide A1 - Scarponi, Giordano E. A1 - Cozzani, Valerio A1 - Seidlitz, Holger T1 - Repeatable testing of a cryogenic storage tank with variable insulation material in fire like conditions N2 - For decarbonizing the energy industry and transport, cryogenic energy carriers have great potential. The storage takes place in tanks with thermal super-insulations, which are in application for decades, but there is only limited knowledge about its behaviour in a fire scenario. This represents a major incident that may generate extraordinary loads on the tank and its insulation system, and that eventually lead to a sudden tank failure. This paper presents a test rig called the Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC), which can be used to test typical thermal superinsulation’s under cryogenic and fire-like conditions in parallel. The test method makes it possible to measure the heat flow through the thermal superinsulation over time and to investigate the degradation behaviour of the insulation within a test. In the paper results from the first tests are presented. T2 - 18th Cryogenics 2025, IIR Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2025 DO - https://doi.org/10.18462/iir.cryo.2025.0007 SP - 205 EP - 210 CY - Prag AN - OPUS4-63740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert T1 - Cryogenic storage system behaviour under fire : A study of the insulation impact N2 - The transition from fossil fuels to low-emission alternatives is essential to mitigate carbon emissions in energy-intensive sectors. Liquid hydrogen (LH2) is a promising energy carrier due to its high gravimetric energy density, but its storage requires advanced insulation to minimize heat ingress and prevent excessive boil-off losses. Multilayer insulation (MLI), perlite, and microspheres are commonly used under vacuum conditions, yet their performance under fire exposure remains a critical concern. This study investigates the thermal degradation of insulation materials and its impact on heat transfer in an event with extreme thermal load conditions using the Cryogenic High-Temperature Thermal Vacuum Chamber (CHTTVC). The heat flow dynamics are analyzed, and an equivalent heat transfer coefficient is proposed to quantify the impact of insulation deterioration as the outer wall temperature increases. Additionally, a novel liquid-vapor interface monitoring method is introduced to improve real-time detection of phase changes within the tank. The results highlight that insulation failure substantially increases the heat flow, which, if not mitigated, can lead to boiling liquid expanding vapor explosions (BLEVE), jet fires, or catastrophic tank failure. The findings provide valuable insights into optimizing LH2 storage safety and improving emergency response strategies for cryogenic tanks exposed to extreme thermal conditions. T2 - 11th International Conference on Hydrogen Safety ICHS 2025 CY - Seoul, South Korea DA - 22.09.2025 KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - Heat transfer PY - 2025 AN - OPUS4-64200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Repeatable Testing of a Cryogenic Storage Tank with Variable Insulation Material in Fire Like Conditions N2 - For decarbonizing the energy industry and transport, cryogenic energy carriers have great potential. The storage takes place in tanks with thermal super-insulations, which are in application for decades, but there is only limited knowledge about its behaviour in a fire scenario. This represents a major incident that may generate extraordinary loads on the tank and its insulation system, and that eventually lead to a sudden tank failure. This paper presents a test rig called the Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC), which can be used to test typical thermal superinsulation’s under cryogenic and fire-like conditions in parallel. The test method makes it possible to measure the heat flow through the thermal superinsulation over time and to investigate the degradation behaviour of the insulation within a test. In the paper results from the first tests are presented. T2 - 18th Cryogenics 2025, IIR Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation PY - 2025 AN - OPUS4-62979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn T1 - Testing of vacuum insulation panels for liquefied hydrogen storage tanks N2 - For the future use of liquefied hydrogen (LH2) as a green energy carrier, new concepts for storage tanks and in particular their insulation are necessary. The methodology applied in current LH2 tanks has some disadvantages while manufacturing and operation of large tanks that may be required in the future. While liquefied natural gas tanks exist in the necessary capacities, they are incompatible with LH2 due to its significantly lower storage temperature. In this paper, the possibility of using vacuum insulation panels (VIPs) as an alternative to the conventional double walled, powder filled vacuum insulation is presented. The two systems are introduced and compared on a conceptual level with a focus on the loss of vacuum failure mode. Furthermore, a test rig that enables the testing and quantification of thermal properties of VIP based insulations in ordinary and loss of vacuum conditions is presented. The test rig is a boil-off calorimeter using liquefied nitrogen and features a square cold surface with a side length of 2 m. An overview over the planned testing and its goals is given. T2 - 18th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - Liquefied Hydrogen KW - LH2 KW - Cryogenics KW - Vacuum KW - Vacuum Insulation Panel PY - 2025 AN - OPUS4-63426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böttcher, Nils T1 - Nominal and Off-Nominal Battery / High Energy Storage Testing Off-Nominal cell and battery testing at BAM N2 - The abuse testing of electrochemical energy storage systems poses a major safety challenge. Thanks to its core competence in ensuring safety in technology and chemistry, BAM has the capabilities to carry out safety tests from small to large scale. Tests up to approx. 200Wh (lithium-ion batteries) can be carried out in the cell test center and abuse tests up to 20kWh are possible in the open field test on the TTS. T2 - Europe Energy Storage Safety Summit CY - Petten, Netherlands DA - 08.10.2024 KW - Battery Safety KW - Abuse testing KW - Lithium-ion batteries KW - Safety critical tests PY - 2024 AN - OPUS4-62321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn T1 - Testing of vacuum insulation panels for liquid hydrogen storage tanks N2 - Vacuum insulation panel (VIP) based insulation could present an alternative to the common double walled vacuum insulation for large liquefied Hydrogen (LH2) storage tanks. In this paper a brief introduction on VIPs and the envisioned design of VIP-based LH2-tank insulation is given. The design of a flat plate boil-off calorimeter for the testing of the insulation concept is shown, with regard to thermal design, mechanical design and instrumentation. Finally, an overview over the particular challenges for modelling VIP-based insulation and the proposed testing to be performed on the test rig is presented. T2 - 18th Cryogenics IIR International Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - Liquefied Hydrogen KW - Insulation KW - Calorimeter KW - LH2 KW - VIP KW - Vacuum Insulation Panel PY - 2025 AN - OPUS4-62988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita T1 - Neues Klassifizierungssystem für Lithiumbatterien N2 - Um Lithiumbatterien sicherer aber gleichzeitig auch dem Gefährdungszustand angemessener und damit wirtschaftlich effizienter transportieren zu können, wird aktuell bei UN ein Klassifizierungssystem nach Gefährlichkeit ausgearbeitet. Als eine der intensiv mitarbeitenden zuständigen Behörden weltweit hat die BAM zahlreiche Untersuchungen selbst durchgeführt und arbeitet an Lösungsansätzen mit. T2 - Gefahrguttag des BMDV im Rahmen der IAA CY - Hannover, Germany DA - 19.09.2024 KW - Lithiumbatterien KW - Klassifizierung KW - Gefahrguttransport KW - Gefährlichkeit PY - 2024 AN - OPUS4-62326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - New concepts in liquid hydrogen storage N2 - On the way to the energy transition, cryogenic fluids such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) are very important. They enable the large-scale economic transport and storage of energy as well as they represent alternative fuels for energy-intensive mobile applications such as aircrafts, ships and HGVs. For the last one, the number of vehicles and fuel stations has increased rapidly in the last 10 years all over Europe. Does this also entail new risks, for instance from a BLEVE in case of fires? To answer this question, BAM has conducted several research projects over the last decades and intensified the research recently with several experimental, numerical, and empirical outcomes on how a tank with insulation behaves in a fire. The presentation shows an overview of this research. The findings are relevant for global standardization procedures and to improve the overall safety in chemistry and technics. T2 - Hydrogen Refueling Station Opening CY - Baruth/Mark, Germany DA - 03.07.2025 KW - LH2 KW - Insulation KW - Fire KW - LNG KW - Safety PY - 2025 AN - OPUS4-63628 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Heßmann, Jennifer A1 - Werner, Jan A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Investigation of Realistic Fire Scenarios Involving Cryogenic Storage Tanks N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks for instance from a BLEVE? A key to answer this question is to research representative fires by its characterization and its effect on the insulation. At BAM’s technical test side in Germany, a test series was started to answer this question among others. This paper presents results on a pool fire under a colorimeter, that simulates a tank. The investigation points out, that the full fire characterization approach allows to represent the fire. The findings are relevant for the investigation of a representative design fire that is applicable for the approval and improvement of tanks as well as to research accident scenarios and their consequences. T2 - Loss Prevention 2025 CY - Bologna, Italien DA - 09.06.2025 KW - LH2 KW - LNG KW - Fire KW - Tank KW - Safety PY - 2025 DO - https://doi.org/10.3303/CET25116031 SN - 2283-9216 IS - 116 SP - 181 EP - 186 PB - AIDIC AN - OPUS4-63738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bock, Robert T1 - Introduction Living Lab Hydrogen Refueling Station N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) forscht und prüft für Sicherheit in Technik und Chemie an drei Standorten in Berlin, sowie auf dem Testgelände Technische Sicherheit in Horstwalde in Brandenburg. Hier haben wir weitreichende Möglichkeiten, Großversuche im Realmaßstab durchzuführen. Besonderes Augenmerk richten wir heute auf das Reallabor Wasserstofftankstelle. Diese voll digitalisierte technische Anlage, die die Wertschöpfungskette von Wasserstoff abbildet, wurde gerade eröffnet und steht nun Partnern aus Industrie und Forschung sowie kleinen mittelständischen Unternehmen oder Start-Ups zum gemeinsamen Forschen und Erproben neuer Technologie zur Verfügung. Ihre Besonderheiten umfassen z.B. eine umfassende Prozessüberwachung nach Industrie 4.0, die dafür nötige IT/OT Infrastruktur, Digitale Zwillinge auf verschiedenen Ebenen, großflächige Aufstellung und baulicher Schutz, Gas-Probenahmestellen auf dem Weg durch die Anlage und H2-Sensornetzwerke zur frühzeitigen Erfassung und Ortung von Leckagen. T2 - Sonderkolloquium H2safety@BAM CY - Berlin, Germany DA - 04.11.2025 KW - Wasserstoff KW - Reallabor KW - Digitalisierung PY - 2025 AN - OPUS4-64699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn A1 - Schmidt, Heiko A1 - Eberwein, Robert T1 - Testing of vacuum insulation panels for liquid hydrogen storage tanks N2 - Vacuum insulation panel (VIP) based insulation could present an alternative to the common double walled vacuum insulation for large liquefied Hydrogen (LH2) storage tanks. In this paper a brief introduction on VIPs and the envisioned design of VIP-based LH2-tank insulation is given. The design of a flat plate boil-off calorimeter for the testing of the insulation concept is shown, with regard to thermal design, mechanical design and instrumentation. Finally, an overview over the particular challenges for modelling VIP-based insulation and the proposed testing to be performed on the test rig is presented. T2 - 18th Cryogenics IIR International Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - Liquefied Hydrogen KW - Insulation KW - Calorimeter KW - Vacuum Insulation Panel KW - LH2 PY - 2025 SN - 0151-1637 DO - https://doi.org/10.18462/iir.cryo.2025.0010 SN - 978-2-36215-053-1 VL - 2025 SP - 168 EP - 174 PB - ICCEX CY - Prag AN - OPUS4-62959 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kästle, Emanuel A1 - Duffner, Eric A1 - Ghaznavi, Ali T1 - DAVID Project meeting 23.09.2025 N2 - Yearly report on the DAVID project, presented in front of the consortial partners. The report shows the progress achieved by the DAVID project team at BAM in terms of testing newly developed carbon-fiber reinforced pressure vessels of type IV. T2 - DAVID project meeting CY - Berlin, Germany DA - 23.09.2025 KW - Acoustic Emission KW - Pressure Vessels KW - DAVID project KW - Damage monitoring KW - Fiber reinforced polymers PY - 2025 AN - OPUS4-65289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Linking material and electrode properties to the cell performance of commercially available sodium-ion cells N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regard to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells.[1,2] Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Batterieforum Deutschland 2026 CY - Berlin, Germany DA - 20.01.2026 KW - Electrochemical Energy Storage KW - Battery KW - Sodium-ion-battery KW - EES KW - Energy Storage PY - 2026 AN - OPUS4-65588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Capabilities of using mobile platforms for monitoring hazard scenarios by the example of the RASEM project N2 - This presentation shows the capabilities of mobile platforms for monitoring hazard scenarios. As an example the RASEM project is presented. Furthermore two ideas for future work are shown, namely, Aerial-based Gas Tomography and Passive Smart Dust. T2 - Climate Change @ Fire Science Workshop CY - Berlin, Germany DA - 10.11.2022 KW - RASEM KW - Dust sensor KW - Low-cost KW - Sensor network KW - Passive Smart Dust KW - Gas Tomography PY - 2022 AN - OPUS4-56296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon T1 - Between Homogenous and Heterogenous Catalysis: Single-Atom-Catalysts N2 - Catalysis is a very important process in chemistry as it lowers the energy barrier for chemical reactions. This saves energy and/or some reactions are only possible with a catalyst under the desired conditions (temperature and pressure). Catalysts can be roughly categorized depending on the phase they interact with the substrates in homogenous and heterogenous catalysis. T2 - 5. Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten (SNI2022) CY - Berlin, Germany DA - 05.09.2022 KW - Single-atom-catalyst KW - Electrochemistry KW - Porous carbons PY - 2022 AN - OPUS4-61989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Umfassende Analyse von Leachabels aus rezyklierten HDPE-Kanistern N2 - Es wurde untersucht, welche Substanzen aus rHDPE-Post-Consumer-Rezyklat herausgelöst und nachgewiesen werden können (Non-Target-Analytik). Die Substanzen wurden sowohl chemisch als auch anwendungsbezogen systematisiert. Diskutiert wurde die Nutzung der Ergebnisse zur Festlegung von Qualitätskriterien von rHDPE sowie zur Verbesserung des mechanischen Recycling-Prozesses. T2 - 20. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 13.11.2025 KW - rHDPE KW - Rezyklat KW - Leachables PY - 2025 AN - OPUS4-64852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. T1 - Simulationsdaten zur photooxidativen Beanspruchung an verschiedenen geografischen Freibewitterungs-Standorten N2 - Freibewitterungen weisen grundsätzlich eine hohe Variabilität der jeweiligen Intensität der Beanspruchungsparameter auf; sie sind nicht einfach wiederholbar. Um dennoch die Ergebnisse einer Beanspruchung vergleichen zu können, ist eine aussagekräftige Charakterisierung der Freibewitterung wichtig. Traditionell werden Daten bekannter Einflussgrößen wie Globalstrahlung, Temperatur oder Feuchtewerte herangezogen. Obwohl man weiß, dass diese Größen an den exponierten Oberflächen wechselwirken und kombiniert als Mikroklima Einfluss auf Degradationsprozesse nehmen, werden schon aus Praktikabilitätsgründen diese separat als klimatische Messgrößen angegeben. Die Aussagekraft dieser Daten ist mäßig. Ziel dieses Beitrags ist es, die Aussagekraft und damit Vergleichbarkeit zu erhöhen, indem diese Messdaten als Stundendaten zu Wirkintegralen vorverarbeitet und jahresweise akkumuliert werden. Betrachtet wird dafür der Prozess der Photooxidation, da dieser Alterungs-mechanismus bei allen Kunststoffen auftritt. Für eine einfache Modellierung wird die wirksame UV-Bestrahlung, gewichtet mit einer Arrhenius-abhängigen Ober¬flächen-temperatur (TOF), über den Beanspruchungszeitraum von hier je einem Jahr akkumuliert. Die Idee einer solchen Messgröße für photooxidative Ober¬flächen¬alterung wurde bereits vorgestellt [1]. Dort wurde ein Gerät vor¬geschlagen, mit dem dieser Wert für verschieden absorbierende Oberflächen für die Dauer einer Exposition akkumuliert wird, und ergänzend eine Abschätzung der Betauungs¬zeiten dieser Referenz-Oberflächen erfolgen könnte. Hier soll es um eine rechnerisch generierte Zusammenstellung dieser photo¬oxidativen 1-Jahres-Alterungswerte für verschiedene Standorte gehen. Ein Temperaturfaktor erfasst dabei den Einfluss der Strahlungserwärmung auf eine weiße, graue bzw. schwarze Referenzoberflächen, spiegelt also die Kopplung von solarer Strahlung und Temperatur wider [1]. Ermittelt wird er aus Stunden¬daten der Globalstrahlung und der Lufttemperatur. Die spektrale Wirkung wird aus Sonnenhöhenständen entsprechend der geografischen Breite mit Hilfe der FastRT-Oberfläche [2] als PiT·h-Wert abgeschätzt [3]. Anhand der errechneten Jahreswerte können die Schweregrade der photo¬oxidativen Beanspruchung an den verschiedenen Standorten unmittelbar verglichen werden. Die gezeigten Simulationsdaten für ein solches „elektronisches Referenzmaterial“ für photooxidative Degradation zeigen die prinzipielle Möglichkeit einer Kartografierung solcher Daten auf. T2 - 53. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 26.03.2025 KW - Polymer 3R, UV, Bestrahlung, Bewitterung PY - 2025 SN - 978-3-9826129-2-8 VL - 53 SP - 19 EP - 28 PB - Gesellschaft für Umweltsimulation e.V. CY - 76327 Pfinztal (Berghausen) AN - OPUS4-62902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Trubiroha, Peter A1 - Wachtendorf, Volker T1 - Significance of new data pairs for irradiance and (surface) temperature N2 - There is consent that UV irradiance and temperature at the place of photodegradation are the most important environmental parameters in weathering, along with humidity. This contribution shows how an improvement in the measurement data situation can improve the significance and comparability of outdoor exposures. Photooxidative ageing is calculated using sample polymers for which the corresponding modelling data (Exposure Response Functions, ERF) is available. The mean square deviations are estimated, which result from using different spectral irradiances and different spectral sensitivities, both of the sensors and the polymers. It will be shown here how the significance of the irradiance values increases with increasing approximation of the spectral sensitivities of the sensor and polymer. Also, the mean square deviations are estimated, which result from using different activation energies and surface temperatures. A selection of different variables to describe the weathering exposure is created. The potential of either individual values or data pairs is evaluated in terms of significance or correlation to the calculated photooxidative ageing. Recording hourly data also enables subsequent evaluations of individual test specimens, adapted to the respective colour or to determine activation energies. An accumulated value, calculated from PIT-radiometer irradiance and a suited surface temperature, can provide a comparison of different outdoor exposures over different locations or years. Thus, a characterisation of the weathering exposure would be related to a reference spectral sensitivity (much closer to a polymer than that of a common UV radiometer), one reference activation energy, and different surface temperature scenarios with, on the one hand, graded solar absorptions (white / grey / black) and, on the other hand, different thermal couplings (coated metal / thick plastic). This results in three values each for plastic samples and coated metals (light / grey / dark). It will never be possible to accurately predict the weathering tests for individual samples (with their specific sensitivities), but the proposed approaches can go a long way towards the comparability of outdoor weathering exposures. T2 - 10th European Weathering Symposium EWS CY - Graz, Austria DA - 11.09.2024 KW - Polymer 3R KW - Outdoor weathering PY - 2024 SN - 978-3-9826129-1-1 SP - 121 EP - 133 PB - Stober Medien GmbH CY - Eggenstein AN - OPUS4-61291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Significance of new data pairs for irradiance and (surface) temperature N2 - There is consent that UV irradiance and temperature at the place of photodegradation are the most important environmental parameters in weathering, along with humidity. This contribution shows how an improvement in the measurement data situation can improve the significance and comparability of outdoor exposures. Photooxidative ageing is calculated using sample polymers for which the corresponding modelling data (Exposure Response Functions, ERF) is available. The mean square deviations are estimated, which result from using different spectral irradiances and different spectral sensitivities, both of the sensors and the polymers. It will be shown here how the significance of the irradiance values increases with increasing approximation of the spectral sensitivities of the sensor and polymer. Also, the mean square deviations are estimated, which result from using different activation energies and surface temperatures. A selection of different variables to describe the weathering exposure is created. The potential of either individual values or data pairs is evaluated in terms of significance or correlation to the calculated photooxidative ageing. Recording hourly data also enables subsequent evaluations of individual test specimens, adapted to the respective colour or to determine activation energies. An accumulated value, calculated from PIT-radiometer irradiance and a suited surface temperature, can provide a comparison of different outdoor exposures over different locations or years. Thus, a characterisation of the weathering exposure would be related to a reference spectral sensitivity (much closer to a polymer than that of a common UV radiometer), one reference activation energy, and different surface temperature scenarios with, on the one hand, graded solar absorptions (white / grey / black) and, on the other hand, different thermal couplings (coated metal / thick plastic). This results in three values each for plastic samples and coated metals (light / grey / dark). It will never be possible to accurately predict the weathering tests for individual samples (with their specific sensitivities), but the proposed approaches can go a long way towards the comparability of outdoor weathering exposures. T2 - 10th European Weathering Symposium EWS CY - Graz, Austria DA - 11.09.2024 KW - Polymer 3R KW - Outdoor weathering PY - 2024 AN - OPUS4-61292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Engelhard, Carsten T1 - Advances in Analytical Chemistry and Mass Spectrometry to Support a Sustainable and Circular Economy N2 - Recent advances in analytical chemistry have significantly supported efforts to realize a sustainable circular economy and circular chemistry. By enabling rapid materials analysis and characterization of materials transformation throughout their life cycle, analytical methods are playing a key role in supporting waste reduction, resource recovery, pollution monitoring, and sustainable manufacturing. In this presentation, recent developments in analytical chemistry and analytical instrumentation to support a sustainable and circular economy will be reviewed and selected contributions from our laboratories will be discussed. For example, high-resolution mass spectrometry combined with chromatography is an indispensable tool for the identification and characterization of plastics. To support the transition from linear to circular chemistry, whichs prioritizes reuse, recycling, and resource efficiency, accurate and detailed chemical information about plastic materials is essential. Here, targeted and non-targeted screening approaches help to characterize, for example, the quality and safety of recycled plastics. In addition, green analytical chemistry has emerged as a topic of interest, emphasizing the use of solvent-free and low-energy methods to minimized environmental impact during analysis. Here, ambient desorption/ionization high-resoluton mass spectrometry (ADI-MS) is considered a very attractive tool because it dos not require chromatography or large amounts of solvent, reduces sample preparation time, and produces virtually no chemical waste. Here, a solvent-free, plasma-based ADI-MS method is presented, which was carefuly developed for the direct identification and fast screening of per- and polyfluoroalkyl substances (PFAS). PFAS are a large class of thousands of synthetic chemicals that are used worldwide. However, growing environmental and human health concerns in the last two decades have led to more stringent regulatory requirements and the development of quantitative analytical methods for PFAS detection. Today, standardized and powerful methods exist, e.g., for the determination PFAS in water, sludge, compost, soil, and drinking water. While liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is often used, sample preparation, solvent consumption, and total analysis times can be challenging. Here, ADI-MS is considered interesting, because it requires only minimal sample preparation and little solvent consumption. In this work, a plasma-based pin-to-capillary flowing atmospheric-pressure afterglow source (FAPA) is used for the direct desorption/ionization of PFAS from thin-layer chromatography (TLC) plates. Selected PFAS samples were directly probed on functionalized TLC surfaces without a preceding planar chromatography step. In addition, direct analysis of PFAS mixtures and selected matrices was performed with little solvent consumption, no sample preparation and short analysis time. T2 - XXII European Conference on Analytical Chemistry (EUROANALYSIS) CY - Barcelona, Spain DA - 31.08.2025 KW - Mass Spectrometry KW - Extractables & Leachables KW - Non-Targeted Analysis KW - PFAS KW - FAPA-MS PY - 2025 AN - OPUS4-65275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Giehl, A. A1 - Schönlein, A. A1 - Feil, F. T1 - Normenvorschlag zur Bewitterung transparenter oder transluzenter Kunststoffe N2 - Aufgrund des tieferen Eindringens der solaren Strahlung treten bei transparenten und bei transluzenten (durchscheinenden) Kunststoffen veränderte Bedingungen gegenüber opaken Proben auf. Dies kann zu speziellen Effekten und damit zu einem abweichenden Bewitterungsverhalten führen. Auch aus Mangel an geeigneten Normen werden diese Effekte häufig vernachlässigt. Deshalb initiiert der DIN-FNK auf ISO-Ebene ein entsprechendes Dokument. Die Norm ist in der Form eines Technical Reports geplant. In einem ersten Teil sollen die Besonderheiten transparenter oder transluzenter Kunststoffe erläutert werden, um den Nutzer für mögliche Probleme zu sensibilisieren. Im zweiten Teil werden Empfehlungen für Bestrahlung oder Bewitterung herausgearbeitet. In einem dritten Teil geht es dann um Besonderheiten bei der Messung von Eigenschaftsänderungen transparenter bzw. transluzenter Kunststoffe. In informativen Anhängen sollen verschiedene Beispiele die Thematik illustrieren. T2 - 51. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 29.03.2023 KW - Bewitterung KW - Polymer 3R KW - Bestrahlung KW - UV PY - 2023 SN - 978-3-9818507-8-9 SP - 39 EP - 46 PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal (Berghausen) AN - OPUS4-57271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Simulationsdaten zur photooxidativen Beanspruchung an verschiedenen geografischen Freibewitterungs-Standorten N2 - Freibewitterungen weisen grundsätzlich eine hohe Variabilität der jeweiligen Intensität der Beanspruchungsparameter auf; sie sind nicht einfach wiederholbar. Um dennoch die Ergebnisse einer Beanspruchung vergleichen zu können, ist eine aussagekräftige Charakterisierung der Freibewitterung wichtig. Traditionell werden Daten bekannter Einflussgrößen wie Globalstrahlung, Temperatur oder Feuchtewerte herangezogen. Obwohl man weiß, dass diese Größen an den exponierten Oberflächen wechselwirken und kombiniert als Mikroklima Einfluss auf Degradationsprozesse nehmen, werden schon aus Praktikabilitätsgründen diese separat als klimatische Messgrößen angegeben. Die Aussagekraft dieser Daten ist mäßig. Ziel dieses Beitrags ist es, die Aussagekraft und damit Vergleichbarkeit zu erhöhen, indem diese Messdaten als Stundendaten zu Wirkintegralen vorverarbeitet und jahresweise akkumuliert werden. Betrachtet wird dafür der Prozess der Photooxidation, da dieser Alterungs-mechanismus bei allen Kunststoffen auftritt. Für eine einfache Modellierung wird die wirksame UV-Bestrahlung, gewichtet mit einer Arrhenius-abhängigen Ober¬flächen-temperatur (TOF), über den Beanspruchungszeitraum von hier je einem Jahr akkumuliert. Die Idee einer solchen Messgröße für photooxidative Ober¬flächen¬alterung wurde bereits vorgestellt [1]. Dort wurde ein Gerät vor¬geschlagen, mit dem dieser Wert für verschieden absorbierende Oberflächen für die Dauer einer Exposition akkumuliert wird, und ergänzend eine Abschätzung der Betauungs¬zeiten dieser Referenz-Oberflächen erfolgen könnte. Hier soll es um eine rechnerisch generierte Zusammenstellung dieser photo¬oxidativen 1-Jahres-Alterungswerte für verschiedene Standorte gehen. Ein Temperaturfaktor erfasst dabei den Einfluss der Strahlungserwärmung auf eine weiße, graue bzw. schwarze Referenzoberflächen, spiegelt also die Kopplung von solarer Strahlung und Temperatur wider [1]. Ermittelt wird er aus Stunden¬daten der Globalstrahlung und der Lufttemperatur. Die spektrale Wirkung wird aus Sonnenhöhenständen entsprechend der geografischen Breite mit Hilfe der FastRT-Oberfläche [2] als PiT·h-Wert abgeschätzt [3]. Anhand der errechneten Jahreswerte können die Schweregrade der photo¬oxidativen Beanspruchung an den verschiedenen Standorten unmittelbar verglichen werden. Die gezeigten Simulationsdaten für ein solches „elektronisches Referenzmaterial“ für photooxidative Degradation zeigen die prinzipielle Möglichkeit einer Kartografierung solcher Daten auf. T2 - 53. Jahrestagung der GUS CY - Stutensee, Germany DA - 26.3.2025 KW - Polymer 3R KW - UV KW - Bestrahlung KW - Bewitterung PY - 2025 AN - OPUS4-62903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -