TY - JOUR A1 - Schalau, Sebastian A1 - Schalau, Bernd A1 - Michel, S. A1 - Schalau, T. T1 - Ein prognostisches Windfeldmodell für die neue VDI-Richtlinie 3783 Blatt 1 N2 - Zurzeit befindet sich die VDI-Richtlinie 3783 Blatt 1 in der Überarbeitung, wobei ein Modellwechsel auf ein Lagrange‘sches Partikelmodell erfolgt. Für die Berechnung der Gasausbreitung mit Gebäuden ist ein Windfeld erforderlich. Mit AUSTAL wird auch das diagnostische Windfeldmodell TALdia zur Verfügung gestellt, das mittels empirischer Ansätze die Rezirkulationszonen von Gebäuden und Hindernissen modelliert. Ein prognostisches Windfeldmodell auf Grundlage der Navier-Stokes-Gleichungen sollte bei komplexen Bebauungs-situationen bessere Berechnungsergebnisse liefern, was aber mit einem größeren Berechnungsaufwand verbunden ist. Im Rahmen eines IGF- Forschungsvorhabens wurde das prognostische Windfeldmodell OFWind als Open Source – Software entwickelt. Im Vergleich mit den experimentellen Ergebnissen des Forschungsvorhabens wird die Anwendbarkeit der beiden Windfeldmodelle bei drei komplexen Bebauungssituationen untersucht. KW - Gasausbreitung PY - 2023 SN - 2191-0073 VL - 13 IS - 3-4 SP - 24 EP - 29 PB - VDI Fachmedien CY - Düsseldorf AN - OPUS4-57578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Bernardy, Christopher T1 - Abschlusstreffen BMBF-Vorhaben SEE-2L, Teilvorhaben BAM: Aufbau eines Großversuchsstandes N2 - Der Vortrag stellt den aktuellen Bearbeitungsstand des Teilvorhabens an der BAM dar. Der Schwerpunkt liegt dabei auf der ersten Versuchsserie mit Batteriezellen und -modulen bis zu 6.8 kWh. Darüber hinaus werden die weiteren geplanten Versuche vorgestellt sowie die Ergbnisverwertung aus dem Projekt aufgezeigt. T2 - Abschlusstreffen zum BMBF-Vorhaben SEE-2L CY - Online meeting DA - 24.04.2023 KW - Stationäre Energiespeicher KW - Elektrische Energiespeicher KW - Auswirkungsbetrachtungen KW - Lithium-Ionen-Batterie PY - 2023 AN - OPUS4-57582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Hahn, S.-K. A1 - Amano, K. A1 - Gimadieva, E. A1 - Krause, U. T1 - A study on thermal runaway propagation in battery cells and modules assembled of pouch cells N2 - Every technical system has a failure rate, including a lithium-ion battery. To minimize the effects in the event of a thermal runaway, it is necessary to know what consequences to expect. In the talk, current results from tests on the thermal runaway behaviour of lithium-ion batteries will be presented and conclusions drawn for the handling of those. T2 - EUSAS Conference 2023, "Addressing the fire risks of electromobility" CY - Frankfurt am Main, Germany DA - 10.05.2023 KW - Electrical Energy Storage KW - Lithium-ion battery KW - Propagation KW - Consequneces PY - 2023 AN - OPUS4-57583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Explosionsschutz - Grundlagen und Maßnahmen zum nichtelektrischen Explosionsschutz N2 - Bei Geräten und Maschinen zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen gemäß 2014/34/EU muss in der europäischen Union eine Zündgefahrenbewertung durchgeführt werden. Dabei müssen unter anderem die Gefahren von nichtelektrischen Zündquellen betrachtet werden, zu denen auch die mechanischen Schlagvorgänge gehören. Bei mechanischen Schlagvorgängen kommt es infolge des Zusammenstoßes zweier Werkstücke bzw. Bauteile zu einer Umwandlung der kinetischen Energie. Dabei erhöht sich die Temperatur der Werkstoffe an der Kontaktstelle und es kommt unter Umständen zu einem Abtrennvorgang kleiner Partikel erhöhter Temperatur. Sowohl die heißen Kontaktstellen (Zündquelle "heiße Oberflächen") als auch die abgetrennten Partikel (Zündquelle "mechanisch erzeugte Funken") können eine wirksame Zündquelle für ein explosionsfähiges Gasgemisch darstellen. Zur Festlegung von Grenzwerten wurden in der Norm DIN EN ISO 80079-36:2016 die Gasgemische anhand ihrer Explosionsgruppe klassifiziert und zu jeder Gruppe die maximale Energie des Schlagvorgangs festgelegt, unter derer die Entstehung einer wirksamen Zündquelle als unwahrscheinlich angenommen werden kann. T2 - Ausbildung zum Explosionsschutzbeauftragten beim Haus der Technik (HdT) CY - Essen, Germany DA - 22.08.2023 KW - Bestimmungsgemäßer Gebrauch im explosionsgefährdeten Bereich KW - Nichtelektrische Funken KW - Mechanische Funken KW - Nichtelektrischer Explosionsschutz KW - Mechanischer Explosionsschutz KW - Reibfunken KW - Schleiffunken KW - Schlagfunken PY - 2023 AN - OPUS4-58110 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis A1 - Grunewald, Thomas T1 - Experimental Study on the ignition of hydrogen containing atmospheres by mechanical impacts N2 - In this presentation the results of the Project HySpark are shown. Mechanical impacts are among the important possible ignition sources to be considered in explosion protection. Hydrogen is particularly prone to be ignited by mechanical impacts compared to natural gas. The effectivity of mechanical impacts as ignition source is dependent from different parameters. In this work the effectivity of impacts as an ignition source for hydrogen containing atmospheres was studied experimentally depending on the inhomogeneous material pairing of the impact. Moreover it was studied, how the effectivity of mechanical impacts as ignition source changes when hydrogen is added to natural gas. T2 - International Conference on Hydrogen Safety (ICHS) 2023 CY - Quebec City, Canada DA - 19.09.2023 KW - Explosion protection KW - Ignition sources KW - Natural gas KW - Safety KW - Mechanical sparks PY - 2023 AN - OPUS4-58514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis A1 - Grunewald, Thomas T1 - Experimental Study on the ignition of hydrogen containing atmospheres by mechanical impacts N2 - Mechanical friction, impact or abrasion is one of the ignition sources that must be avoided in hazardous zones with explosive atmospheres. The effectiveness of mechanical impacts as ignition source is dependent from several parameters including the minimum ignition energy of the explosive atmosphere, the properties of the material pairing, the kinetic impact energy or the impact velocity. By now there is no standard procedure to determine the effectiveness of mechanical impacts as ignition source. In this work the effectiveness of mechanical impacts with defined and reproducible kinetic impact energy as ignition source for hydrogen containing atmospheres was studied systematically in dependence from the inhomogeneous material pairing considering materials with practical relevance like stainless steel, low alloy steel, concrete, and non-iron-metals. It was found that ignition can be avoided, if non-iron metals are used in combination with different metallic materials, but in combination with concrete even the impact of non-iron-metals can be an effective ignition source if the kinetic impact energy is not further limited. Moreover, the consequence of hydrogen admixture to natural gas on the effectiveness of mechanical impacts as ignition source was studied. In many cases ignition of atmospheres containing natural gas by mechanical impacts is rather unlikely. No influence could be observed for admixtures up to 25% hydrogen and even more. The results are mainly relevant in the context of repurposing the natural gas grid or adding hydrogen to the natural gas grid. T2 - International Conference on Hydrogen Safety (ICHS) 2023 CY - Quebec City, Canada DA - 19.09.2023 KW - Explosion protection KW - Hydrogen transport in pipelines KW - ATEX KW - Hazardous areas KW - Mechanical sparks KW - Ignition source PY - 2023 SN - 979-12-210-4274-0 SP - 82 EP - 93 AN - OPUS4-58515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasch, Thomas A1 - Hesse, Olaf T1 - Oxygen service – Tests, Risks and Accidents N2 - Materials and components for oxygen service must be tested and found suitable for their intended use. For a fire or burn out, three requirments have to be present: Fuel, Oxygen and an ignition source. The presentation gives practival examples for all these three requirements and explaines the background and the assessment criteria of tests at BAM. However, risks still exist and can lead to severe accidents. Some accidents, their effects as well as the possible causes are presented to raise awareness of the specific dangers when handling oxygen. T2 - International Teadit Open House CY - Kirchbichl, Austria DA - 07.09.2023 KW - Oxygen KW - Risks KW - Accidents KW - Tests PY - 2023 AN - OPUS4-58452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spitzer, Stefan A1 - Askar, Enis A1 - Hecht, Kristin A1 - Gabel, Dieter A1 - Geoerg, Paul A1 - Krause, Ulrich A1 - Dufaud, Olivier A1 - Krietsch, Arne ED - Amyotte, Paul T1 - The maximum rate of pressure rise of hybrid mixtures N2 - The maximum rate of pressure rise (dp/dt)𝑚𝑎𝑥 and the corresponding K-value of hybrid mixtures containing flammable gases and dusts are important for constructive explosion protection measures. Since the safety characteristics of dusts and gases are determined under different conditions, there has been considerable confusion about the influence of flammable gas on the (dp/dt) of dusts and vice versa. While some investigations showed comparably higher values for hybrid mixtures, others stated that the highest value for the gas component alone is the worst case. The first part of this paper focuses on the confusion around the different statements about (dp/dt)𝑚𝑎𝑥 of hybrid mixtures and where they come from. In the second part of this paper experimental results are presented that illustrate how to clarify the different findings of past research and show what to expect as a real worst-case-value for hybrid mixtures. KW - Hybrid Mixtures KW - 20L-sphere KW - Turbulent combustion KW - Maximum rate of pressure rise PY - 2023 U6 - https://doi.org/10.1016/j.jlp.2023.105178 SN - 0950-4230 SN - 1873-3352 VL - 86 SP - 1 EP - 9 PB - Elsevier CY - Amsterdam AN - OPUS4-58435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tschirschwitz, Rico A1 - Hahn, Sarah-K. A1 - Saupe, Alexander A1 - Janßen, Marvin A1 - Krause, Ulrich T1 - Sicherheitsrisiko Batterien – Demonstrator aus dem Projekt SEE-2L bereits im Einsatz N2 - Der Beitrag beschreibt das BMBF-Verbundvorhaben SEE-2L. Im Artikel werden die wesentlichen Meilensteine des Projektes vorgestellt. Ebenso werden die wichtigsten im Projekt erzielten Ergebnisse aufgeführt und verlinkt. KW - Stationäre Energiespeicher KW - Batterie KW - Auswirkungsbetrachtungen KW - EES KW - Elektrische Energiespeicher PY - 2023 UR - https://info.sifo.de/public/a_25436_GZ5jd/file/data/669_Informationsbrief_zur_zivilen_Sicherheitsforschung_07-2023.pdf#page=7 IS - 7 SP - 7 EP - 9 PB - Bundesministerium für Bildung und Forschung (BMBF) CY - Bonn AN - OPUS4-58347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis A1 - Holtappels, Kai T1 - Competence centre h2safety@bam N2 - In this presentation the current focus areas of the competence centre H2Safety@BAM are shown. The fields of competence include “Material properties and compatibility”, “Process and plant safety”, “Component testing, component safety and approval” as well as “Sensors, analytics and certified reference Materials. Moreover, the cross-cutting activities regarding “Education and training” and the testing possibilities and planed test facilities at the Test Site for Technical Safety (BAM TTS) are presented. T2 - VDMA P2X4A: P2X Technik-Treffen CY - Online meeting DA - 14.09.2023 KW - Hydrogen KW - Test area hydrogen safety KW - ModuH2Pipe PY - 2023 AN - OPUS4-58333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -