TY - CONF A1 - Döring, Sarah T1 - Optimization of Polymer Interface: Novel Surface-functionalized Corundum Particles for Improved Antibody Digestion N2 - Therapeutic monoclonal antibodies are the fastest-growing class of biological agents and the development of reliable analytical methods for their quantification is becoming increasingly important. Liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS) represents one of the leading technologies for antibody quantification. The serin protease trypsin has emerged as the gold standard enzyme for digesting intact protein into peptides for this approach. However, many protocols exist that often lead to different results. The talk will provide a brief introduction to the application of novel thermostable and surface-functionalized trypsin particles for improved antibody digestion as well as initial successes in polymer functionalization of the corundum surface to prevent nonspecific protein adsorption during the digestion procedure. T2 - SALSA Make and Measure 2024: Interfaces CY - Berlin, Germany DA - 11.09.2024 KW - Antibody Quantification KW - Recombinant Enzymes KW - LC-MS/MS KW - Enzyme Immobilisation KW - Surface Functionalisation KW - Corundum PY - 2024 AN - OPUS4-61041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Sarah T1 - Sequence of Mus Musculus monoclonal IgG2c anti-CCMV Immunoglobulin N2 - We report the full-length nucleotide and amino acid sequences of the light (κ) and heavy chain of the IgG2c anti-CCMV monoclonal antibody (hybridoma clone BAM-CCMV-29-81), generated against Cowpea Chlorotic Mottle Virus (CCMV). Sequencing of hybridoma clone was performed using a cost-effective Sanger-based workflow that includes DNA-level subclass determination and peptide mass fingerprint confirmation. The κ-chain sequence was assigned to IGKV4-6101 / IGKJ101, while the heavy chain was assigned to IGHV2-601 / IGHD1-101 / IGHJ3*01 with IgG2c constant regions from the NOD strain. Both chains were validated against RNA Illumina sequencing, confirming 100% identity. The sequences are available in GenBank under accession numbers PX123807 (κ-chain) and PX123808 (heavy chain). KW - Antibody Sequencing KW - BAM-CCMV-29-81 KW - anti-CCMV-antibody PY - 2025 UR - https://www.ncbi.nlm.nih.gov/nuccore/PX123807 UR - https://www.ncbi.nlm.nih.gov/nuccore/PX123808 PB - National Library of Medicine CY - Bethesda AN - OPUS4-63968 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Umfassende Analyse von Leachabels aus rezyklierten HDPE-Kanistern N2 - Es wurde untersucht, welche Substanzen aus rHDPE-Post-Consumer-Rezyklat herausgelöst und nachgewiesen werden können (Non-Target-Analytik). Die Substanzen wurden sowohl chemisch als auch anwendungsbezogen systematisiert. Diskutiert wurde die Nutzung der Ergebnisse zur Festlegung von Qualitätskriterien von rHDPE sowie zur Verbesserung des mechanischen Recycling-Prozesses. T2 - 20. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 13.11.2025 KW - rHDPE KW - Rezyklat KW - Leachables PY - 2025 AN - OPUS4-64852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Engelhard, Carsten T1 - Advances in Analytical Chemistry and Mass Spectrometry to Support a Sustainable and Circular Economy N2 - Recent advances in analytical chemistry have significantly supported efforts to realize a sustainable circular economy and circular chemistry. By enabling rapid materials analysis and characterization of materials transformation throughout their life cycle, analytical methods are playing a key role in supporting waste reduction, resource recovery, pollution monitoring, and sustainable manufacturing. In this presentation, recent developments in analytical chemistry and analytical instrumentation to support a sustainable and circular economy will be reviewed and selected contributions from our laboratories will be discussed. For example, high-resolution mass spectrometry combined with chromatography is an indispensable tool for the identification and characterization of plastics. To support the transition from linear to circular chemistry, whichs prioritizes reuse, recycling, and resource efficiency, accurate and detailed chemical information about plastic materials is essential. Here, targeted and non-targeted screening approaches help to characterize, for example, the quality and safety of recycled plastics. In addition, green analytical chemistry has emerged as a topic of interest, emphasizing the use of solvent-free and low-energy methods to minimized environmental impact during analysis. Here, ambient desorption/ionization high-resoluton mass spectrometry (ADI-MS) is considered a very attractive tool because it dos not require chromatography or large amounts of solvent, reduces sample preparation time, and produces virtually no chemical waste. Here, a solvent-free, plasma-based ADI-MS method is presented, which was carefuly developed for the direct identification and fast screening of per- and polyfluoroalkyl substances (PFAS). PFAS are a large class of thousands of synthetic chemicals that are used worldwide. However, growing environmental and human health concerns in the last two decades have led to more stringent regulatory requirements and the development of quantitative analytical methods for PFAS detection. Today, standardized and powerful methods exist, e.g., for the determination PFAS in water, sludge, compost, soil, and drinking water. While liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is often used, sample preparation, solvent consumption, and total analysis times can be challenging. Here, ADI-MS is considered interesting, because it requires only minimal sample preparation and little solvent consumption. In this work, a plasma-based pin-to-capillary flowing atmospheric-pressure afterglow source (FAPA) is used for the direct desorption/ionization of PFAS from thin-layer chromatography (TLC) plates. Selected PFAS samples were directly probed on functionalized TLC surfaces without a preceding planar chromatography step. In addition, direct analysis of PFAS mixtures and selected matrices was performed with little solvent consumption, no sample preparation and short analysis time. T2 - XXII European Conference on Analytical Chemistry (EUROANALYSIS) CY - Barcelona, Spain DA - 31.08.2025 KW - Mass Spectrometry KW - Extractables & Leachables KW - Non-Targeted Analysis KW - PFAS KW - FAPA-MS PY - 2025 AN - OPUS4-65275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - PE-Rezyklat Einsatz in Gefahrgutbehältern? N2 - In diesem Vortrag geht es darum zu beschreiben, ob Rezyklat für PE Behälter gefüllt mit Gefahrgut Anwendung finden darf. Kanister aus Neuware und Rezyklat wurden verschiedenen Untersuchungen unterzogen. Es wurde der Feststoff und Leachable getestet. Methoden sind TED-GC/MS und GC-HRMS. Proben der Leachable wurden nach 1 und 4 Wochen genommen und die Peakanzahl vergleichen dargestellt. Als Lösemittel wurden Wasser, Ethanol, EtOAc, Ammoniak und HNO3 verwendet. T2 - Fachaustausch Projekt GeSKAR CY - Dessau, Germany DA - 10.01.2025 KW - Gefahrgutbehälter KW - Rezyklat PY - 2025 AN - OPUS4-62396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bandow, N. A1 - Aitken, M. D. A1 - Geburtig, Anja A1 - Kalbe, Ute A1 - Piechotta, Christian A1 - Schoknecht, Ute A1 - Simon, Franz-Georg A1 - Stephan, Ina T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives? N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented. KW - Environmental simulations KW - Polymer-based products KW - Artificial weathering KW - Degradation KW - Leaching KW - Soil contact PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310 DO - https://doi.org/10.3390/ma13122709 SN - 1996-1944 VL - 13 IS - 12 SP - Paper 2709, 22 PB - MDPI CY - Basel, Switzerland AN - OPUS4-50931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tannenberg, Robert A1 - Tscheuschner, Georg A1 - Raab, Christopher A1 - Flemig, Sabine A1 - Döring, Sarah A1 - Ponader, Marco A1 - Thurmann, Melinda A1 - Paul, Martin A1 - Weller, Michael G. T1 - Simplified Sample Preparation and Lateral Flow Immunoassay for the Detection of Plant Viruses N2 - Lateral flow immunoassays (LFAs) are widely used for on-site testing; however, their use for the rapid detection of plant viruses in the field is often limited by inconvenient sample preparation. Here, we present a new sampling method and a simplified dipstick LFA format for the detection and monitoring of cowpea chlorotic mottle virus (CCMV) as a model plant pathogen. The assay employs a monoclonal mouse antibody for capture and a poly-clonal rabbit antibody conjugated to 80 nm gold nanoparticles for detection. Conventional sample and conjugate pads are omitted, allowing the test strips to be dipped directly into wells containing plant extract and antibody–gold conjugate. No plastic casing was required, which could lead to a reduction in waste. It was shown that CCMV concentrations as low as 3.5 µg/L or 350 pg per sample could be reliably detected in 15 min. Specificity tests confirmed that other plant viruses, cowpea mosaic virus (CPMV) and tobacco mosaic virus (TMV), did not produce false-positive results. In addition, we describe a new method for on-site sampling using a manual punch and a syringe equipped with a frit. This step combines grinding the sample, extraction, filtration, and reconstitution and mixing of the antibody-gold conjugate, enabling the analysis of punched leaf disks without laboratory equipment. When applied to CCMV-infected cowpea plants, the assay revealed systemic infection before visual symptoms became apparent. This work demonstrates that simplified LFAs combined with innovative sampling techniques can provide sensitive, specific, and rapid diagnostics for crop monitoring and support early intervention strategies in agriculture. N2 - Lateral-Flow-Immunoassays (LFAs) werden häufig für Vor-Ort-Tests eingesetzt; ihr Einsatz zum schnellen Nachweis von Pflanzenviren im Feld wird jedoch oft durch eine umständliche Probenvorbereitung eingeschränkt. Hier stellen wir eine neue Probenahmemethode und ein vereinfachtes Dipstick-LFA-Format zum Nachweis und zur Überwachung des Cowpea Chlorotic Mottle Virus (CCMV) als Modellpflanzenpathogen vor. Der Test verwendet einen monoklonalen Maus-Antikörper zur Bindung und einen polyklonalen Kaninchen-Antikörper, der an 80-nm-Goldnanopartikel konjugiert ist, zum Nachweis. Herkömmliche Proben- und Konjugatpads entfallen, sodass die Teststreifen direkt in Vertiefungen getaucht werden können, die Pflanzenextrakt und das Antikörper-Gold-Konjugat enthalten. Es ist keine Kunststoffhülle erforderlich, was zu einer Reduzierung des Abfallaufkommens führen könnte. Es zeigte sich, dass CCMV-Konzentrationen von nur 3,5 µg/L oder 350 pg pro Probe innerhalb von 15 Minuten zuverlässig nachgewiesen werden konnten. Spezifitätstests bestätigten, dass andere Pflanzenviren, das Cowpea Mosaic Virus (CPMV) und das Tobacco Mosaic Virus (TMV), keine falsch-positiven Ergebnisse lieferten. Darüber hinaus beschreiben wir eine neue Methode zur Probenahme vor Ort unter Verwendung eines manuellen Lochers und einer mit einer Fritte ausgestatteten Spritze. Dieser Schritt kombiniert das Zerkleinern der Probe, die Extraktion, die Filtration sowie die Rekonstitution und das Mischen des Antikörper-Gold-Konjugats und ermöglicht so die Analyse der ausgestanzten Blattscheiben ohne Laborausrüstung. Bei der Anwendung an mit CCMV infizierten Augenbohnenpflanzen zeigte der Assay eine systemische Infektion, bevor visuelle Symptome erkennbar wurden. Diese Arbeit zeigt, dass vereinfachte LFAs in Kombination mit innovativen Probenahmetechniken eine sensitive, spezifische und schnelle Diagnostik für die Pflanzenüberwachung bieten und Strategien zur frühzeitigen Intervention in der Landwirtschaft unterstützen können. KW - Point-of-care diagnostics KW - Dipstick immunoassay KW - Pre-symptomatic detection KW - Precision agriculture KW - Integrated pest management KW - Crop health monitoring PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657039 DO - https://doi.org/10.3390/bios16020100 SN - 2079-6374 VL - 16 IS - 2 SP - 1 EP - 16 PB - MDPI AG CY - Basle, Switzerland AN - OPUS4-65703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Sarah A1 - Wulfes, Birte S. A1 - Atanasova, Aleksandra A1 - Jaeger, Carsten A1 - Walzel, Leopold A1 - Tscheuschner, Georg A1 - Flemig, Sabine A1 - Gawlitza, Kornelia A1 - Feldmann, Ines A1 - Konthur, Zoltán A1 - Weller, Michael G. T1 - Corundum Particles as Trypsin Carrier for Efficient Protein Digestion N2 - Reusable enzyme carriers are valuable for proteomic workflows, yet many supports are expensive or lack robustness. This study describes the covalent immobilization of recombinant trypsin on micrometer-sized corundum particles and assesses their performance in protein digestion and antibody analysis. The corundum surface was cleaned with potassium hydroxide, silanized with 3-aminopropyltriethoxysilane and activated with glutaraldehyde. Recombinant trypsin was then attached, and the resulting imines were reduced with sodium cyanoborohydride. Aromatic amino acid analysis (AAAA) estimated an enzyme loading of approximately 1 µg/mg. Non-specific adsorption of human plasma proteins was suppressed by blocking residual aldehydes with a Tris-glycine-lysine buffer. Compared with free trypsin, immobilization shifted the temperature optimum from 50 to 60 °C and greatly improved stability in 1 M guanidinium hydrochloride. Activity remained above 80% across several reuse cycles, and storage at 4 °C preserved functionality for weeks. When applied to digesting the NISTmAb, immobilized trypsin provided peptide yields and sequence coverage comparable to soluble enzyme and outperformed it at elevated temperatures. MALDI-TOF MS analysis of Herceptin digests yielded fingerprint spectra that correctly identified the antibody and achieved 60% sequence coverage. The combination of low cost, robustness and analytical performance makes corundum-immobilized trypsin an attractive option for research and routine proteomic workflows. N2 - Wiederverwendbare Enzymcarrier sind für proteomische Arbeitsabläufe von großem Wert, doch viele Trägermaterialien sind teuer oder nicht robust genug. Diese Studie beschreibt die kovalente Immobilisierung von rekombinantem Trypsin auf mikrometergroßen Korundpartikeln und bewertet deren Leistungsfähigkeit beim Proteinverdau und der Antikörperanalyse. Die Korundoberfläche wurde mit Kaliumhydroxid gereinigt, mit 3-Aminopropyltriethoxysilan silanisiert und mit Glutaraldehyd aktiviert. Anschließend wurde rekombinantes Trypsin gebunden, und die entstandenen Imine wurden mit Natriumcyanoborhydrid reduziert. Die aromatische Aminosäureanalyse (AAAA) ergab eine geschätzte Enzymbeladung von etwa 1 µg/mg. Die unspezifische Adsorption von menschlichen Plasmaproteinen wurde durch Blockierung der restlichen Aldehyde mit einem Tris-Glycin-Lysin-Puffer unterdrückt. Im Vergleich zu freiem Trypsin verschob die Immobilisierung das Temperaturoptimum von 50 auf 60 °C und verbesserte die Stabilität in 1 M Guanidiniumhydrochlorid erheblich. Die Aktivität blieb über mehrere Wiederverwendungszyklen hinweg bei über 80 %, und die Lagerung bei 4 °C bewahrte die Funktionalität über Wochen hinweg. Beim Verdau des NISTmAb lieferte das immobilisierte Trypsin Peptidausbeuten und Sequenzabdeckungen, die mit denen des löslichen Enzyms vergleichbar waren, und übertraf dieses bei erhöhten Temperaturen. Die MALDI-TOF-MS-Analyse von Herceptin-Verdauen ergab Fingerabdruck-Spektren, die den Antikörper korrekt identifizierten und eine Sequenzabdeckung von 60 % erreichten. Die Kombination aus niedrigen Kosten, Robustheit und analytischer Leistungsfähigkeit macht auf Korund immobilisiertes Trypsin zu einer attraktiven Option für die Forschung und routinemäßige proteomische Arbeitsabläufe. KW - Bottom-up proteomics KW - Solid-phase digestion KW - Biopharmaceutical analysis KW - Peptide mapping KW - Non-specific binding KW - amino acid analysis PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657021 DO - https://doi.org/10.3390/biotech15010002 SN - 2673-6284 VL - 15 IS - 1 SP - 1 EP - 23 PB - MDPI CY - Basel AN - OPUS4-65702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Enhancing wastewater surveillance through anthropogenic markers N2 - Since the global COVID-19 pandemic, there has been an increased focus on systematically monitoring pathogens in raw wastewater - a practice known as wastewater-based epidemiology (WBE). This approach, aligned with the One Health concept, the revised EU Urban Wastewater Treatment Directive (2024), and Germany’s amended Infection Protection Act (2023), aims to generate health data independently of individual testing and reporting behaviors through wastewater surveillance. – Germany’s AMELAG project implemented wastewater surveillance at approximately 170 treatment plants, with biweekly sampling. This infrastructure - comprising treatment plants, logistics, laboratories, and health authorities - also provided us samples that were analyzed for their levels of a series of anthropogenic markers. These markers improve data accuracy by accounting for site-specific variations in wastewater composition and flow rates, such as those caused by stormwater runoff. Beyond epidemiology, wastewater surveillance provides valuable insights into the spread of antimicrobial resistance (AMR), drug consumption, industrial discharges, and the efficiency of wastewater treatment plants in eliminating indicator substances. To assess these factors, cost-effective, high-throughput methods such as ELISA (Enzyme-Linked Immunosorbent Assay) offer a practical solution. This study examines ELISA’s application in detecting diclofenac, carbamazepine, and bisphenol A in wastewater samples from various locations. T2 - Pacifichem 2025 CY - Honolulu, HI, USA DA - 15.12.2025 KW - Antibodies KW - Immunoassay KW - Pharmaceuticals PY - 2025 AN - OPUS4-65720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Singh, Chandan T1 - Oxidation resistant, interlaced 3D MXene composite for electrochemical biosensing N2 - BSA (Bovine Serum Albumin) as an oxidation resistant for Ti₃C₂Tx-MXene : BSA derived method protects 3D interlaced Ti₃C₂Tx–CNT nanocomposite from oxidative degradation, preserving their structural integrity . Application in biosensing: After the removal of excess BSA, the nanocomposite were amino-silane functionalized and decorated with anti-SARS-CoV-2 antibodies, enabling selective detection of SARS-CoV-2 nucleocapsid protein (SNP) in saliva. Performance of the biosensor: The designed biosensor showed high sensitivity (LoD 23.6 pM), wide detection range (0.1–500 ng/mL), no cross-reactivity, and improved response due to the preserved 3D interwoven nanostructure. T2 - Graphene Week 2025 CY - Vicenza, Italy DA - 22.09.2025 KW - Nanocomposite KW - Biosensor KW - SARS-CoV-2 PY - 2025 AN - OPUS4-65728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kumari, Surbhi T1 - Tagetes erecta synthesized bimetallic Ag–Au nanoparticles and their potential application in electrochemical detection and estimation of ampicillin in raw milk N2 - This study focuses on the green synthesis of Ag–Au nanoparticles using Tagetes erecta extract and their potential application in electrochemical detection and estimation of ampicillin in raw milk. The Ag–Au nanoparticles were covalently bonded to the hydroxylated fluorine-doped tin oxide electrode surface through silane chemistry enabling the effective interaction of the 5' thiolated-aptamer with the nanoparticle-modified surface for aptasensor development. The aptasensor displayed a limit of detection of 0.40 ng mL−1 and a stability of 30 days. Moreover, the aptasensor demonstrated reliable performance with both spiked milk samples and real milk samples, detecting a concentration of 194 ng mL−1 in raw milk with results closely matching with those obtained by the LC-MS technique. T2 - SALSA Make & Measure 2025: Interfaces CY - Berlin, Germany DA - 10.09.2025 KW - Aptamer KW - Antibiotic KW - Biosensing PY - 2025 AN - OPUS4-65727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Advancing environmental screening and monitoring: Immunoanalytical approaches for emerging contaminants N2 - Micropollutants, including various emerging contaminants, are continuously released into the environment. Detecting their presence using conventional analytical methods is often expensive and time-consuming, making large-scale monitoring impractical. To effectively protect ecosystems and human health, rapid and cost-efficient screening methods are essential. Furthermore, the need to monitor the entire water cycle for micropollutants is becoming increasingly critical, particularly from a One Health perspective, as climate change and growing demands for water reuse amplify environmental challenges. – Antibody-based methods, commonly referred to as immunoassays, offer a promising solution. These rapid and cost-effective techniques can fill information gaps and provide sensors and process analytical technology with short response times. A wide range of immunoanalytical formats is available, from laboratory-based methods to portable analyzers and online sensors. Ensuring the availability of high-quality antibodies is essential to the reliability of these approaches. This talk presents how a whole range of immunoanalytical methods can be employed to trace emerging contaminants in the environment. An indicator for specific industrial inputs is bisphenol A which is also an endocrine disruptor. Additionally, pharmaceuticals serve as important markers of human impact on the water cycle. Natural tracers, such as endogenous hormones and bile acids, help track wastewater pathways, while anthropogenic markers - most notably caffeine - serve as indicators of human activity, frequently appearing in environmental water samples. T2 - Pacifichem 2025 CY - Honolulu, HI, USA DA - 15.12.2025 KW - Antibodies KW - Immunoassay KW - Pharmaceuticals PY - 2025 AN - OPUS4-65719 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Devi, Sarita A1 - Goel, S. A1 - Rani, S. A1 - Schneider, Rudolf J. A1 - Rohilla, R. A1 - Kumari, Surbhi A1 - Prabhakar, N. T1 - MOF-metal nanohybrid-assisted charge transfer amplification for electrochemical biosensing of the MUC1 cancer biomarker N2 - Cancer is a severe disease characterized by high mortality and complex pathophysiology; however, its early and accurate diagnosis remains inadequate. Conventional diagnostic approaches often fall short, particularly for dense tissues, and are frequently invasive, costly, and of limited availability. This reinforces the need for a compact, economical, and ultrasensitive assay that is operationally simple and interpretable. We present an efficient electrochemical detection platform for the cancer biomarker mucin 1 (MUC1). A fluorine-doped tin oxide (FTO) surface was modified with an iron-based metal–organic framework (FeMOF) intercalated with palladium nanorods (PdNR). FeMOF was prepared using Fe3+/Fe2+ precursors at a 1.2/1 mmol ratio and dual ligands, i.e. tetrahydroxy-1,4-benzoquinone and 2-aminobenzene-1,4-dicarboxylic acid. AntiMUC1 antibodies were immobilized on a modified electrode via p-phenylenediamine (PDA) (FTO/FeMOF@PdNR/PDA/antiMUC1Ab) and evaluated using electrochemical impedance spectroscopy (EIS) and voltammetry. The designed sensor demonstrated an excellent binding affinity for the MUC1 antigen. Among these techniques, the EIS method stands out for its technical performance, as evidenced by the high sensitivity (detection limit 0.074 fg mL−1), quantification limit 0.24 fg mL−1, and high analytical sensitivity (1.39 × 103 Ω fg−1 mL−1 cm−2). The negligible cross-reactivity with interferent biomolecules, rapid response (10-minute equilibrium), regenerability up to 5 cycles, high reproducibility (RSD ∼1–3%), and long-term stability (up to 35 days) further validate the suitability of the proposed MUC1 immunosensor. This study presents an ultrasensitive biosensor that is compact, cost-effective, and easy for individuals at home to use after further development into a kit-based end product. Moreover, its excellent functionality for spiked serum samples shows promise for next-generation clinical diagnostics. KW - Antibodies KW - Metal-organic framework KW - Immunoassay PY - 2026 DO - https://doi.org/10.1039/D6AN00018E SP - 1 EP - 11 PB - Royal Society of Chemistry CY - London AN - OPUS4-65726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaeger, Carsten T1 - Untargeted Analysis of Leachables Released from Recycled Polyethylene Canisters N2 - Recycling existing materials and products as far as possible is an integral part of the circular economy. Plastic-based packaging, including containers for food and beverages but also for storing and transporting chemicals and dangerous goods, are presently made to a wide range from fossil resources. However, even for these “contact sensitive” products, there is still the aim of sustainability using recycled materials. For packings for the transport of dangerous goods, safety characteristics of the containments made from the “virgin” materials including polyethylene (PE) are well known and tested within the frame of their design type approval. Much less, however, is known about their counterparts made from recycled materials. Apart from material weaking, incorporation of residues into recycled plastics can cause contamination of the goods inside the packaging. To fill this gap, we have evaluated high-density PE (HDPE) canisters made from post-consumer waste towards release of plastic additives and contaminants such as residues from former contents. Using a comprehensive untargeted high-resolution mass spectrometry (HRMS) approach as well as thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC/MS), we detected up to 870 distinct components depending on the type of stored chemical and storage duration. Most of the components were unique to or released in significantly higher amounts from recycled HDPE compared to conventional HDPE. 129 of the components could be identified and analyzed for functional use. The analysis revealed “cosmetics”, “fragrance” and “flavoring” as major associations next to known and expected uses in the field of “plastics”, indicating significant introduction of foreign contaminants into the product. We present details on the compound classes involved and discuss consequences for political targets on increasing recycling rates in this product segment. T2 - International Conference on Non-Target Screening CY - Erding, Germany DA - 13.10.2025 KW - Extractables KW - Leachables KW - Untargeted analysis KW - Recycling KW - Polyethylene PY - 2025 AN - OPUS4-65742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaminski, Katja A1 - Kluge, Stephanie A1 - Frenzel, Olivia A1 - Bücker, Michael A1 - Westphalen, Tanja ED - Ziegahn, Karl-Friedrich T1 - Entwicklung, Validierung und Anwendung eines beschleunigten Bewitterungsprotokolls zur Bewertung der Freisetzung von Bisphenol A (BPA) aus Polycarbonat (PC)-Materialien in die Umwelt N2 - BPA unterliegt einer kontinuierlichen behördlichen Kontrolle und ist als besonders besorgniserregender Stoff (SVHC) gelistet. Besondere Besorgnis besteht hinsichtlich seines häufigen Nachweises in Oberflächengewässern, obwohl es leicht biologisch abbaubar ist. In mehreren Studien wurden die Quellen und Wege von BPA in die Umwelt untersucht, wobei festgestellt wurde, dass seine Hauptverwendung als Monomer in PC nur marginal zu den BPA-Freisetzungen in die Umwelt über seinen Lebenszyklus beiträgt. Um die tatsächlichen Freisetzungen von BPA aus PC unter umweltrelevanten Bedingungen besser zu verstehen, wurde eine neu entwickelte Methodik (Bundesanstalt für Materialforschung und -prüfung, BAM) angewendet, die ein neuartiges beschleunigtes Bewitterungsprotokoll für Polycarbonat-Materialien in Kombination mit einem sensitiven Analysenverfahren umfasst, welches eine Bestimmung von BPA im Ultraspurenbereich ermöglicht. Das Bewitterungsprotokoll erreicht eine 13,6-fache Beschleunigung im Vergleich zu mitteleuropäischen Wetterbedingungen und simuliert Umweltstressoren (globale Strahlung, Regen, Temperaturschwankungen) in einer Bewitterungskammer, wobei gleichzeitig die BPA-Freisetzung mit einem validierten LC-MS/MS-Verfahren unter Verwendung einer organischen Isotopenverdünnungskalibrierung bestimmt wird. In parallelen Freilandversuchen wurden die Trübung und die Vergilbung („Yellowness-Index“) der zu untersuchenden Proben als Referenzparameter untersucht. T2 - 54. Jahrestagung der GUS 2026 CY - Blankenloch-Stutensee, Germany DA - 25.03.2026 KW - Polycarbonat KW - Bisphenol A KW - Bewitterung PY - 2026 SN - 978-3-9826129-3-5 VL - 54 SP - 139 EP - 153 AN - OPUS4-65793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Entwicklung, Validierung und Anwendung eines beschleunigten Bewitterungsprotokolls zur Bewertung der Freisetzung von Bisphenol A (BPA) aus Polycarbonat (PC)-Materialien in die Umwelt N2 - BPA unterliegt einer kontinuierlichen behördlichen Kontrolle und ist als besonders besorgniserregender Stoff (SVHC) gelistet. Besondere Besorgnis besteht hinsichtlich seines häufigen Nachweises in Oberflächengewässern, obwohl es leicht biologisch abbaubar ist. In mehreren Studien wurden die Quellen und Wege von BPA in die Umwelt untersucht, wobei festgestellt wurde, dass seine Hauptverwendung als Monomer in PC nur marginal zu den BPA-Freisetzungen in die Umwelt über seinen Lebenszyklus beiträgt. Um die tatsächlichen Freisetzungen von BPA aus PC unter umweltrelevanten Bedingungen besser zu verstehen, wurde eine neu entwickelte Methodik (Bundesanstalt für Materialforschung und -prüfung, BAM) angewendet, die ein neuartiges beschleunigtes Bewitterungsprotokoll für Polycarbonat-Materialien in Kombination mit einem sensitiven Analysenverfahren umfasst, welches eine Bestimmung von BPA im Ultraspurenbereich ermöglicht. Das Bewitterungsprotokoll erreicht eine 13,6-fache Beschleunigung im Vergleich zu mitteleuropäischen Wetterbedingungen und simuliert Umweltstressoren (globale Strahlung, Regen, Temperaturschwankungen) in einer Bewitterungskammer, wobei gleichzeitig die BPA-Freisetzung mit einem validierten LC-MS/MS-Verfahren unter Verwendung einer organischen Isotopenverdünnungskalibrierung bestimmt wird. In parallelen Freilandversuchen wurden die Trübung und die Vergilbung („Yellowness-Index“) der zu untersuchenden Proben als Referenzparameter untersucht. T2 - 54. Jahrestagung der GUS 2026 CY - Blankenloch-Stutensee, Germany DA - 25.03.2026 KW - Bewitterung KW - Bisphenol A KW - Polycarbonat PY - 2026 AN - OPUS4-65794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -