TY - CONF A1 - Schneider, Rudolf A1 - Konthur, Zoltán A1 - Jaeger, Carsten T1 - Reference Material (IgG) for CCQM-PAWG Key Comparison N2 - BAM proposes a recombinant human IgG (anti-tetanus monoclonal antibody SA13) as candidate material for the 2027 CCQM-PAWG key comparison on antibody purity. The antibody is produced via hybridoma and recombinant expression systems, with detailed sequence and glycosylation profiling. Analytical methods include MALDI-TOF-MS, SEC, DLS, and UV-vis spectroscopy to assess purity, aggregation, and stability. Preliminary results show high purity, low heterogeneity, and consistent size distribution. A minimum of 40 mg IgG is required, with 100 mg preferred for deeper characterization. Production is expected to be completed by the end of 2026, with potential for a joint technical project. T2 - Spring Meeting of CCQM-PAWG CY - Sèvres, France DA - 06.04.2025 KW - Antibodies KW - Research Grade Test Material KW - Mass spectrometry KW - Affinity PY - 2025 AN - OPUS4-63503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Susset, Bernd A1 - Kalbe, Ute T1 - Spezifische Herausforderungen bei der PFAS-Elution N2 - Im Teil des Workshops, der sich mit Praxiserfahrungen zu den Elutionsverfahren DIN 19528 und DIN 19529 befasste, wurden spezifische Herausforderungen bei Elutionsuntersuchungen von Bodenproben mit einer PFAS-Kontamination vorgestellt. Aus durchgeführten Robustheitsuntersuchungen im ZAG der Universität Tübingen sowie in der BAM wurden praxisrelevante Schlussfolgerungen erläutert und für einzelne PFAS-Verbindungen und Vorläufersubstanzen konkretisiert. Dabei wurde auch auf die Vergleichbarkeit von Schüttel- und Säulenversuchen beim bewertungsrelevanten Wasser/Feststoff-Verhältnis von 2 l/kg und die Bedeutung des Fest/Flüssigtrennschrittes beim Schüttelverfahren eingegangen. Die Untersuchung von Böden auf PFAS mit Elutionsversuchen ist generell möglich, aber es besteht eine komplexe Abhängigkeit der Konzentrationen im Eluat vom Gesamtgehalt, der Löslichkeit und des Verteilungsmusters der einzelnen PFAS, der Art der Bodenmatrix und dem Einfluss der Probenaufbereitung vor der Analytik. Die geringere Sensitivität der Feststoffanalytik für PFAS im Vergleich zur Eluatanalytik erschwert die Berechnung von Massenbilanzen. T2 - Workshop / Anwendertreffen Elutionsverfahren im Regelungsbereich der Mantelverordnung (ErsatzbaustoffV / BBodSchV) und der EU-BauPVO CY - Berlin, Germany DA - 07.05.2024 KW - Elution KW - PFAS KW - Prekursoren KW - Boden KW - Säulenversuch KW - Schüttelversuch PY - 2024 AN - OPUS4-62065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Monitoring trace substances in wastewater and surface water by immunoanalytical assays and sensors N2 - Monitoring the elimination of trace substances in wastewater treatment plants, as required in the recast of the EU Urban Wastewater Treatment Directive and the new Kommunalabwasserrichtlinie (KARL), creates a need for on-site analyses in wastewater treatment plants. Immunoanalytical methods can be carried out on site, e.g. in the form of rapid tests, but continuously operating (immuno-bio)sensors would be ideal. And antibody-based methods have the inherent disadvantage that one antibody must be used per analyte and therefore only a small number of substances can be analysed. A set of indicators has been integrated in the directives in accordance with the list of the Kompetenzzentrum Spurenstoffe BW (KomS) and offer points of reference here. Yet, in order to be able to use immunoanalytical methods for their monitoring, (DIN/ISO) standards are required that define the necessary quality requirements and quality management measures for the sensors. In addition, for the larger part of the indicators, the required antibodies have yet to be developed and made commercially available in the long term. The talk will highlight our previous work on high-throughput methods, such as ELISA, regarding the presence of anthropogenic markers and some indicators as well as research approaches for sensor technology that could be used on-site, and will provide an overview of deficits and future efforts. T2 - Kolloquium der Abteilung Technische Umweltchemie und Sensortechnik CY - Stuttgart, Germany DA - 21.05.2025 KW - Antibodies KW - Immunoassay KW - Microfluidics KW - Biosensor KW - Trace substances PY - 2025 AN - OPUS4-63501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schneider, Rudolf T1 - Wasserdiagnose durch die Verwendung von Markern N2 - Die Überwachung des gesamten Wasserkreislaufs auf Mikroverunreinigungen ist aus gesundheitlicher und ökologischer Hinsicht wünschenswert und gewinnt durch den Klimawandel und das zunehmende Erfordernis der Wiederverwendung des Brauchwassers weiter an Bedeutung. Die schnellen und kostengünstigen antikörperbasierten Methoden („Immunoassays“) können helfen, Informationslücken zu schließen und kürzere Reaktionszeiten zu ermöglichen. Von Labormethoden über tragbare Analysengeräte bis hin zu Online-Sensoren sind viele Formate möglich (u. a. ELISA, Abb. 1). Es muss zudem die Bereitstellung der notwendigen, hochqualitativen Antikörper gewährleistet werden. Da aber gilt „1 Analyt – 1 Antikörper“, ist die Herstellung eines Konsenses bezüglich der vordringlich zu bestimmenden Indikatoren/Marker notwendig. Auch die Normung der Verfahren ist parallel in Angriff zu nehmen. KW - Antikörper KW - Immunoassay KW - Abwasser KW - ELISA PY - 2025 UR - https://analyticalscience.wiley.com/content/article-do/wasserdiagnose-durch-die-verwendung-von-markern VL - 2025 IS - 1 SP - 1 EP - 4 PB - WILEY CY - Hoboken, NJ, USA AN - OPUS4-63508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Keeping the Y N2 - The talk traces my career path and presents BAM as an attractive employer. It also offers advice on shaping one's own career after PhD. T2 - IWC Alumni Day 2025 CY - Garching bei München, Germany DA - 04.07.2025 KW - Antibodies KW - ELISA KW - Career PY - 2025 AN - OPUS4-63640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lisec, Jan T1 - CorMID - Correct Mass Isotopologue Distribution Vectors N2 - The investigation of metabolic fluxes and metabolite distributions within cells by means of tracer molecules is a valuable tool to unravel the complexity of biological systems. Technological advances in mass spectrometry (MS) technology such as atmospheric pressure chemical ionization (APCI) coupled with high resolution (HR), not only allows for highly sensitive analyses but also broadens the usefulness of tracer-based experiments, as interesting signals can be annotated de novo when not yet present in a compound library. However, several effects in the APCI ion source, i.e., fragmentation and rearrangement, lead to superimposed mass isotopologue distributions (MID) within the mass spectra, which need to be corrected during data evaluation as they will impair enrichment calculation otherwise. Here, we present and evaluate a novel software tool to automatically perform such corrections. We discuss the different effects, explain the implemented algorithm, and show its application on several experimental datasets. This adjustable tool is available as an R package from CRAN. KW - Mass Spectrometry KW - Software KW - R package KW - Mass Isotopomer Distribution KW - Flux Analysis PY - 2022 UR - https://github.com/cran/CorMID/ PB - GitHub CY - San Francisco, CA, USA AN - OPUS4-56442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lisec, Jan A1 - Kobelt, D. A1 - Walther, W. A1 - Mokrizkij, M. A1 - Grötzinger, C. A1 - Jaeger, Carsten A1 - Baum, K. A1 - Simon, M. A1 - Wolf, J. A1 - Beindorf, N. A1 - Brenner, W. A1 - Stein, U. T1 - Systematic Identification of MACC1-Driven Metabolic Networks in Colorectal Cancer N2 - MACC1 is a prognostic and predictive metastasis biomarker for more than 20 solid Cancer entities. However, its role in cancer metabolism is not sufficiently explored. Here, we report on how MACC1 impacts the use of glucose, glutamine, lactate, pyruvate and fatty acids and show the comprehensive analysis of MACC1-driven metabolic networks. We analyzed concentrationdependent changes in nutrient use, nutrient depletion, metabolic tracing employing 13C-labeled substrates, and in vivo studies. We found that MACC1 permits numerous effects on cancer metabolism. Most of those effects increased nutrient uptake. Furthermore, MACC1 alters metabolic pathways by affecting metabolite production or turnover from metabolic substrates. MACC1 supports use of glucose, glutamine and pyruvate via their increased depletion or altered distribution within metabolic pathways. In summary, we demonstrate that MACC1 is an important regulator of metabolism in cancer cells. KW - Mass Spectroscopy KW - Metabolomics KW - Cancer PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-533526 DO - https://doi.org/10.3390/cancers13050978 VL - 13 IS - 5 SP - 1 EP - 22 PB - MDPI Journal Cancers AN - OPUS4-53352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Russo, Francesco Friedrich T1 - Low energy-electron ionisation mass spectrometry in non-targeted analysis N2 - The high throughput and sensitivity of mass spectrometry has resulted in a broad application in non-targeted screenings (NTS). Gas chromatography electron ionisation mass spectrometry (GC-EI-MS) methods show high reproducibility of fragmentation patterns, good separation, and vast spectral libraries. A significant disadvantage of standard 70 eV EI is the high degree of fragmentation with a possible loss of the molecular ion signal. The loss of molecular ion signal results in an increased difficulty in identifying compounds absent from spectral libraries as it precludes a straightforward molecular formula assignment. The high degree of fragmentation, and the resulting depletion of high m/z signals, also results in a reduced discriminatory power. The disadvantages of EI-MS are approached by soft ionisation techniques and, more recently, low energy (LE) EI-MS. LE-EI is a softer version of EI, which keeps high similarity with the standard 70 eV EI spectra and the good chromatographic properties of GC, while reducing the depletion of higher m/z ion signals. LE-EI-MS has been applied doping analytics[1], metabolomics[2], and fingerprinting of foods[3]. Our objective is the comparison of LE-EI-MS to alternative soft ionisation methods, e.g. APCI-MS, and the development of a NTS workflow for LE-EI-MS, including a highly automated data processing and annotation pipeline. In a first phase 13 compound libraries (705 compounds) will be measured at 14, 18, and 70 eV. Molecular ion abundance and similarity to standard 70 eV spectra are going to be evaluated. Furthermore, common neutral losses and fragments will be identified and included into an annotation tool. If the tool shows satisfying performance, it will be published (either as a standalone package or as an expansion to the InterpretMSSpectrum[4, 5] R package). T2 - ANAKON 2025 CY - Leipzig, Germany DA - 10.03.2025 KW - Mass Spectrometry (MS) KW - Low Energy Electron Ionisation Mass Spectrometry (LE-EI-MS) KW - Non-tagreted analysis PY - 2025 AN - OPUS4-62781 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Development, Validation and Application of an Accelerated Weathering Protocol for Assessing Bisphenol A Release from Polycarbonate Materials into the environment N2 - Bisphenol A (BPA) is under continuous regulatory scrutiny and listed as substance of very high concern (SVHC). Particular concern is related to its frequent detection in surface waters, despite being readily biodegradable. Several studies have been conducted to investigate sources and pathways of BPA in the environment, concluding that its main use as monomer in polycarbonate (PC) contributes only marginally to environmental BPA releases over its life cycle. To better understand the actual releases of BPA from PC under environmental conditions, a newly developed methodology (Federal Institute for Materials Research and Testing, BAM) was applied, which comprises a novel accelerated weathering protocol for polycarbonate (PC) materials, combined with an advanced analytical setup allowing for improved detection of BPA at trace level concentrations. The weathering protocol achieves a 13.6-fold acceleration compared to Central European outdoor conditions and simulates environmental stressors (global radiation, rain, temperature variations) in a laboratory weathering chamber, with simultaneous BPA release measurements using an organic isotope dilution calibration LC-MS/MS approach. Validation was performed in parallel outdoor exposure tests, by using haze and yellowness index measurements as reference parameters. PC sample types representative of major polycarbonate applications were examined: Samples with different levels of UV-protection as used in transparent sheets used outdoor in construction or housings in Electro- and Electronic applications as well as samples with a protective coating as used in automotive applications (headlamps, glazing and construction). Results demonstrated consistently low total BPA releases of around 0.3 mg m⁻² for samples with exposed PC surfaces, while releases from coated samples were significantly reduced by around two orders of magnitude. In all cases examined, the BPA release ceased to zero after a period of four to six weeks, equivalent to approximately 1 to 1.5 years of outdoor exposure. This suggests that potential BPA releases diminish to virtually zero after that timespan. While the newly developed test method is not suitable for routine laboratory implementation, it provides crucial quantitative data on BPA release from PC materials during accelerated environmental weathering. T2 - Umwelt 2025 CY - Dessau, Germany DA - 22.09.2025 KW - Bisphenol A KW - Polycarbonate KW - Weathering PY - 2025 AN - OPUS4-64664 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - The European Metrology Network for Pollution Monitoring – EMN POLMO N2 - The EU’s Green Deal acknowledges that « the EU needs to better monitoring, report, prevent and remedy pollution from air, water, soil and consumer products and to look more systematically at all policies and regulations ». In order to address these challenges, the Commission launched a new Strategy for Sustainability in October 2020, and adopted a Zero-pollution Action Plan for air, water and soil, in 2021. The comparability and trueness of measurements are often compromised by the lack of intact traceability chains and appropriate quality controls, for example attained by the use of matrix-matched certified reference materials, participation in interlaboratory comparisons and other validation schemes . Noticeable improvements are apprehended after practical demonstrations and scientific discussions on the importance of traceability to the SI with stakeholders and end-users . The European Metrology Network for Pollution Monitoring (EMN POLMO) was created in 2022 to provide metrology support to the environmental community and industry involved in the monitoring of variety of pollutants, including chemical pollutants, radionuclides, biological & microbiological, and nano and micro particles, in the three environmental compartments (air, water and soil). Recently, light pollution and noise pollution have been included in the scope of the network. One of the main goals of POLMO is to bridge the interests of the different stakeholder and end-user, and to contribute to environmental sustainability through the provision of tools and resources, required to perform accurate, comparable measurements. The POLMO Strategic Research Agenda identifies the key measurement challenges and opportunities in pollution monitoring and sets out a roadmap for future research and development. T2 - BIPM - 150 years of meter convention CY - Versailles, France DA - 20.05.2025 KW - POLMO KW - EMN PY - 2025 AN - OPUS4-64662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Development, Validation and Application of an Accelerated Weathering Protocol for Assessing Bisphenol A Release from Polycarbonate Materials into the environment N2 - Bisphenol A (BPA) is under continuous regulatory scrutiny and listed as substance of very high concern (SVHC). Particular concern is related to its frequent detection in surface waters, despite being readily biodegradable. Several studies have been conducted to investigate sources and pathways of BPA in the environment, concluding that its main use as monomer in polycarbonate (PC) contributes only marginally to environmental BPA releases over its life cycle. To better understand the actual releases of BPA from PC under environmental conditions, a newly developed methodology (Federal Institute for Materials Research and Testing, BAM) was applied, which comprises a novel accelerated weathering protocol for polycarbonate (PC) materials, combined with an advanced analytical setup allowing for improved detection of BPA at trace level concentrations. The weathering protocol achieves a 13.6-fold acceleration compared to Central European outdoor conditions and simulates environmental stressors (global radiation, rain, temperature variations) in a laboratory weathering chamber, with simultaneous BPA release measurements using an organic isotope dilution calibration LC-MS/MS approach. Validation was performed in parallel outdoor exposure tests, by using haze and yellowness index measurements as reference parameters. PC sample types representative of major polycarbonate applications were examined: Samples with different levels of UV-protection as used in transparent sheets used outdoor in construction or housings in Electro- and Electronic applications as well as samples with a protective coating as used in automotive applications (headlamps, glazing and construction). Results demonstrated consistently low total BPA releases of around 0.3 mg m⁻² for samples with exposed PC surfaces, while releases from coated samples were significantly reduced by around two orders of magnitude. In all cases examined, the BPA release ceased to zero after a period of four to six weeks, equivalent to approximately 1 to 1.5 years of outdoor exposure. This suggests that potential BPA releases diminish to virtually zero after that timespan. While the newly developed test method is not suitable for routine laboratory implementation, it provides crucial quantitative data on BPA release from PC materials during accelerated environmental weathering. T2 - Umwelt 2025 CY - Dessau, Germany DA - 22.09.2025 KW - Bisphenol A KW - Polycarbonate KW - Weathering PY - 2025 AN - OPUS4-64665 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Comparison of three different TOP Assay approaches for the determination of PFAS concentration in soil N2 - Within a project by the German Environmental Agency (Umweltbundesamt – UBA) soil samples are taken at different sites all over Germany. The concentration of 30 PFAS - 13 carboxylic acids (C4-C18), 5 sulfonic acids (C4-C10) and 12 precursor substances) - was determined in these soil samples using three different sample preparation approaches: 1) ultrasonic extraction of the soil samples with Methanol; 2) preparation of eluates to test the leaching behaviour of the PFAS and 3) TOP assays following the method published by Houtz & Sedlak. Targeted LC-MS/MS is used to determine PFAS concentration after all three preparation steps. For the TOP assay, the concentration of all 30 PFAS is compared prior to and after the oxidation reaction. Besides the ‘classic’ TOP assay, two other TOP assay approaches, the dTOP assay and the photoTOP assay, are tested and compared. First, all three TOP assay approaches will be tested on a reference soil spiked with a solution including all 30 PFAS measured in the project. Later, soil samples taken within the the priorly described project will were tested. This work is financed by the UBA via the ReFoPlan2021 project, FKZ372171. T2 - Euroanalysis 2025 CY - Barcelona, Spain DA - 31.08.2025 KW - PFAS KW - TOP-Assay KW - Soil PY - 2025 AN - OPUS4-64666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -