TY - JOUR A1 - Henning, Thorsten A1 - Goerdeler, Cornelius A1 - El-Khatib, Ahmed H. A1 - Meyer, Klas A1 - Bruer, Gustav G. A1 - Abraham, Klaus A1 - Monien, Bernhard T1 - Characterization and quantitation of urinary metabolites of 3-monochloropropane-1,2-diol (3-MCPD) in rats N2 - Fatty acid esters of 3-monochloropropane-1,2-diol (3-MCPD) are heat-induced contaminants formed from fats and sodium chloride. The mode of action for the 3-MCPD mediated induction of renal tubule neoplasms in rats is still unclear, which is in part due to lacking metabolism data. In the current study, urinary metabolites were identified by one- and two-dimensional 13C nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry following oral administration of 3-MCPD or [13C3]3-MCPD in rats. In addition to 3-MCPD itself, nine metabolites were identified. Four of those, N-acetyl-S-(2,3-dihydroxypropyl)cysteine (DHPMA), 3-MCPD sulfate, β-chlorolactic acid (β-ClLA) and oxalic acid have been reported before. Five novel metabolites in rat urine were thiodiglycolic acid (TDGA), thionyldiglycolic acid (TNDGA), 3-MCPD glucuronide (at least three isomers), 3-carboxy-2-hydroxypropyl mercapturic acid (CHPMA), and 3-(S-carboxymethyl)mercaptolactic acid (CMMLA). Only three metabolites were excreted at mean dose ratios > 1% (after treatment with 50 mg 3-MCPD/kg body weight in male and female rats), i.e. 3-MCPD (7.3%, 9.7%), DHPMA (3.5%, 1.7%) and TDGA (1.1%, 4.0%). The overall mean dose excretion in urine samples (males: 12.2%, females: 16.3%) supported hypotheses on formation of conjugates/adducts of reactive metabolites and the possibility that dechlorination leads to suitable building blocks for amino acid and fatty acid synthesis. The identification of TDGA indicated the interim formation 2-chloroacetaldehyde, previously identified to mediate specific nephrotoxic effects of the cytostatic ifosfamide in rats. KW - 3-Monochloropropane-1,2-diol KW - 3-MCPD KW - Metabolism KW - Urine PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657230 DO - https://doi.org/10.1007/s00204-026-04318-x SP - 1 EP - 17 PB - Springer-Verlag GmbH CY - Heidelberg AN - OPUS4-65723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer, Klas T1 - Benchtop NMR-Spektroskopie im industriellen Produktionsumfeld: Herausforderungen auf dem Weg zur Online-Prozessintegration N2 - Benchtop-NMR Spektrometer erobern erfolgreich seit Jahren die Labore und haben sich als ein vielseitiges analytisches Werkzeug etabliert. Zunächst stark fokussiert auf den Forschungs-bereich, sind sie heute zunehmend auch nahe der Produktion auf dem Vormarsch. Die Zielstellung ist nur selten der Ersatz von klassischer „Hochfeld“-NMR-Spektroskopie. Vielmehr erschließen die kompakten Geräte oftmals neue Anwendungsfelder, beispielsweise in der Online-Reaktionsverfolgung im Labor oder der schnellen at-line Qualitätskontrolle in der chemischen Produktion. Hier kommen die Vorteile der geringeren Anschaffungs- und Betriebskosten, die Möglichkeit des prozessnahen Einsatzes, sowie besonders der einfachen Bedienung zum Tragen. Während es zahlreiche Beispiele von Online-Applikationen im Labor gibt, ist die direkte Einbindung in großtechnische Produktionsanlagen bislang selten. Im Vergleich zu etablierten prozessanalytischen Verfahren, wie z.B. der Nahinfrarot- oder Raman-Spektroskopie ist die Benchtop-NMR-Spektroskopie noch Neuland und es existieren kaum prozesstaugliche kommerzielle Lösungen. Im Rahmen eines gemeinsamen Entwicklungsprojekts zwischen BAM und Evonik wurde eine Einhausung für ein handelsübliches Benchtop-NMR-Spektrometer konzipiert und gebaut. Diese dient nicht nur der Erfüllung sicherheitstechnischer Auflagen wie dem Explosionsschutz, sondern auch der Abschirmung rauer Umgebungseinflüsse auf den Betrieb des Laborgeräts. Eine flexible integrierte Automatisierung ermöglicht die skalierbare Anbindung an übergeordnete Prozessleittechnik im Sinne eines PAT-Moduls. Dieser Vortrag gibt einen Überblick über die Herausforderungen auf dem Weg von der Idee, über die Umsetzung bis hin zur tatsächlichen Prozessintegration. T2 - 47. Praktische Probleme der Kernresonanzspektroskopie CY - Göttingen, Germany DA - 17.03.2026 KW - Prozessanalytik KW - NMR Spektroskopie KW - Feldintegration KW - Explosionsschutz PY - 2026 AN - OPUS4-65705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karafiludis, Stephanos A1 - Stawski, Tomasz T1 - Deciphering the non-classical Crystallization of transition metal phosphates (TMP) N2 - A crucial aspect of ensuring sustainable raw material utilization to meet global demand lies in the efficient recovery and reuse of critical elements and compounds. Phosphate, PO43-, and many transition metals e.g. Ni and Co are listed as critical raw materials (CRMs) due to their indispensable role in numerous industrial processes. However, these elements can also exert harmful environmental impacts, with phosphorus being a major contributor to anthropogenic eutrophication and transition metal ions acting as toxic pollutants, particularly in ground- and wastewaters. Typically, separate pathways have been considered to extract hazardous substances such as transition metals or phosphate, independently from each other. Here, we report the crystallization pathways of transition metal phosphate (TMP) compounds, M-struvite and M-phosphate octahydrate with M = Ni2+, Co2+, NixCo1-x2+, NH4MPO4∙6H2O, M3(PO4)2∙8H2O from aqueous solutions. The co-precipitation of these particular TMP compounds from industrial and agricultural wastewaters has high potential as a P- and 3d metal recovery route. For efficient extraction and transformation of the TMPs, a comprehensive understanding of their nucleation and crystallization pathways from aqueous solutions is required. While the crystallization mechanisms of magnesium or calcium phosphate-bearing phases have been researched for many decades (e.g. struvite, apatite), investigations into TMP materials are relatively scarce and often focus on the adsorption of transition metals on the surface instead of their actual incorporation in minerals. In our study, we investigated in detail the precipitation process of several Co and Ni phosphates using ex- and in-situ spectroscopic-, spectrometric- and diffraction-/scattering-based techniques. We show that the crystallization behavior of TMPs, indeed deviates from a classical crystallization paradigm and follows a non-classical multi-step pathway. Our work extends the understanding of TMP crystallization by elucidating the formation of amorphous precursors preceding the final crystalline phase This time-dependent transition of the transition metal precursor phases can be observed by electron-imaging/tomography depicting a progressively changing amorphous solids until their ultimate reconfiguration to a crystal (Figure 1). Here, the two-metallic NixCo1-x-mixtures deviated anomalously in their reaction kinetics, crystallization outcome and participation of both metals from their pure endmembers. By measuring the crystallization with in-situ X-ray scattering and pH using a flow-through setup geometry, a complex prolonged interplay among nucleating entities e.g. and amorphous or crystalline solids could be observed in the metal phosphate mixtures reaching equilibrium after almost two and a half hours (Figure 2). Our results provide a holistic perspective on the crystallization behavior of transition metal phosphate phases, shedding light on their unique nucleation and growth kinetics involving structural and chemical transformations of the intermediate phases. T2 - Granada Münster Discussion Meeting 2023 CY - Münster, Germany DA - 29.11.2023 KW - Non-classical crystallization theory KW - Transition metals KW - Phosphates PY - 2023 AN - OPUS4-59007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martins, Ines A1 - Al-Sabbagh, Dominik A1 - Bentrup, U. A1 - Marquardt, Julien A1 - Schmid, Thomas A1 - Scoppola, E. A1 - Kraus, Werner A1 - Stawski, Tomasz A1 - de Oliveira Guilherme Buzanich, Ana A1 - Yusenko, Kirill A1 - Weidner, Steffen A1 - Emmerling, Franziska T1 - Formation Mechanism of a Nano-Ring of Bismuth Cations and Mono-Lacunary Keggin-Type Phosphomolybdate N2 - A new hetero-bimetallic polyoxometalate (POM) nano-ring was synthesized in a one-pot procedure. The structure consists of tetrameric units containing four bismuth-substituted monolacunary Keggin anions including distorted [BiO8] cubes. The nano-ring is formed via self-assembly from metal precursors in aqueous acidic medium. The compound (NH4)16[(BiPMo11O39)4] ⋅ 22 H2O; (P4Bi4Mo44) was characterized by single-crystal X-ray diffraction, extended X-ray absorption fine structure spectroscopy (EXAFS), Raman spectroscopy, matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF), and thermogravimetry/differential scanning calorimetry mass spectrometry (TG-DSC-MS). The formation of the nano-ring in solution was studied by time-resolved in situ small- and wide-angle X-ray scattering (SAXS/WAXS) and in situ EXAFS measurements at the Mo−K and the Bi−L3 edge indicating a two-step process consisting of condensation of Mo-anions and formation of Bi−Mo-units followed by a rapid self-assembly to yield the final tetrameric ring structure. KW - Bismuth KW - In situ EXAFS KW - In situ SAXS/WAXS KW - Lacunary Keggin ion KW - Polyoxometalates KW - Self-assembly PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546823 DO - https://doi.org/10.1002/chem.202200079 SN - 0947-6539 VL - 28 IS - 27 SP - 1 EP - 7 PB - Wiley-VCH CY - Weinheim AN - OPUS4-54682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer, Klas T1 - Benchtop-NMR Spectroscopy as a PAT tool in industrial environments – Field integration of a laboratory instrument N2 - Chemical industry is currently in a rapidly changing environment, e.g., due to variability of raw material quality, high energy costs and demand for improving efficiency. Process optimization and new process concepts become more and more important. Flexible chemical plants can produce various high-quality products using multi-purpose equipment with short downtimes between campaigns and reduce time to market for new products. Intensified continuous production plants allow for difficult to produce compounds like exothermic reactions with high heat dissipation. Highly automated chemical process monitoring along with real-time quality control are prerequisites to such concepts and, thus, should be based on “real-time” chemical information. A commercially available benchtop NMR spectrometer was integrated to the full requirements of an automated chemical production environment such as explosion safety, field communication, and robust evaluation of sensor data. Field studies in modular and conventional production plant setups show promising results gaining process knowledge for further optimization. NMR spectroscopy appeared as powerful online analytical method and allows using a modular data analysis approach, which can even serve as reliable reference method for further calibration-dependent PAT applications (e.g., NIR or Raman spectroscopy). Based on experiences from earlier field studies an enhanced field enclosure setup was developed and built, including the option of a secondary analytical method (e.g., optical spectroscopy). Integrated control systems allow for a flexible implementation based on the available automation infrastructure at the chemical plant or pilot plant setup. In the future, modular interconnecting “smart” PAT systems and process equipment have the potential speed up the setup of production equipment for chemicals and pharma-ceuticals and therefore help to reduce the time-to-market. T2 - Analytica Conference 2026 CY - Munich, Germany DA - 24.03.2026 KW - Benchtop NMR spectroscopy KW - Process Analytical Technology KW - Field integration KW - Explosion safety PY - 2026 AN - OPUS4-65771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -