TY - THES A1 - Chun, Hyunjoo T1 - Experimentelle Untersuchungen und CFD-Simulationen von DTBP-Poolfeuern N2 - Es wurden Massenabbrandraten, Flammentemperaturen, spezifische Ausstrahlungen (Surface emissive power, SEP), Bestrahlungsstärken und Flammenlängen von DTBP- und Kerosin-Poolfeuern in Labor- und Feldversuchen (0.003 m < d < 3.15 m) gemessen und CFDSimulationen von DTBP- Poolfeuern bei d = 1.12 m und d = 3.15 m durchgeführt. Der Einfluss von Aktivierungs-, Verbrennungs- und Zersetzungsenergie sowie der Zersetzungsprodukte auf das Abbrandverhalten von DTBP wurde experimentell untersucht. Die mit der DDK gemessene Zersetzungsenergie von DTBP liegt im Bereich von – 189 kJ/mol bis – 210 kJ/mol, womit sie etwa 20 % bis 40 % höher ist als die mit dem DDK gemessene Aktivierungsenergie der Zersetzungsreaktion. Die in einem Verbrennungskalorimeter gemessene mittlere Verbrennungsenthalpie von DTBP beträgt = � c _H 36 000 kJ/kg. Die mit Hilfe der FTIR gefundenen Zersetzungsprodukte von DTBP in der Gasphase sind vor allem Aceton und Ethan. Die gemessenen Massenabbrandraten von DTBP-Poolfeuern (0.20 kg/(m² s) ≤ ′′ ≤ DTBP m& 0.30 kg/(m² s)) zeigen eine nur geringe Abhängigkeit vom Pooldurchmesser d, sind aber abhängig vom d fünf bis zwanzig mal größer als die von Kohlenwasserstoff-Poolfeuern. Die mit dem IR- Thermographie-System gemessenen Temperaturen der DTBP-Poolfeuer (1480 K bis 1580 K) sind im gesamten untersuchten Bereich ca. 300 K bis 600 K höher als die der Kerosin-Poolfeuer und stimmen mit den sehr heißen LNG-Poolfeuern bei 8 m ≤ d ≤ 15 m gut überein. Die mit dem IR-Thermographie-System über die gesamte Brenndauer gemessenen mittleren spezifischen Ausstrahlungen der DTBP-Poolfeuer betragen SEP = 130 kW/m² bei d = 1.12 m und SEP = 250 kW/m² bei d = 3.15 m und liegen somit um den Faktor drei bis zehn höher als bei Kohlenwasserstoff-Poolfeuern. Die mit (Ellipsoidal-) Radiometern gemessene mittlere Bestrahlungsstärke der DTBPPoolfeuer beträgt E (_y = 0.50 m, d =1.12 m) = 113 kW/m² und ist somit im Vergleich zu den n-Pentan-, Superbenzin- und Diesel-Poolfeuern um den Faktor zwei bis zehn größer. Die unter Verwendung der Thomas- Gleichung abgeschätzten Flammenlängen von DTBPPoolfeuern bei d < 0.50 m zeigen eine gute Übereinstimmung mit den mit S-VHSVideokameras gemessenen mittleren Flammenlängen (11d ≤ H ≤ 17d). Im Bereich von 0.05 m ≤ d ≤ 1.15 m sind die mittleren Flammenlängen H größer als im Experiment, sie stimmt dagegen bei d = 3.15 m gut überein und beträgt H (d = 3.15 m) ≈ 6d. Es wurden CFD-Simulationen von DTBP-Poolfeuern bei d = 1.12 m und d = 3.15 m unter Verwendung des kommerziellen ANSYS CFX Software Packet durchgeführt. Die dreidimensionalen Berechnungsgeometrien wurden mit Hexa-Gittern vernetzt, wobei die Anzahl der Zellen pro Volumen im Bereich von 100 000 bis 400 000 betrug. Die Zeitschritte für die CFD-Simulationen waren abhängig von der Feinheit des Gitters und dem Pooldurchmesser Δt = 10─ 2 s bis Δt = 10─ 5 s. Für die Modellierung der DTBP-Poolflammen wurde ein Datensatz für den Brennstoff DTBP im Preprocessor des ANSYS CFX-Programms implementiert. Es wurde die vollständige Verbrennung von DTBP berücksichtigt. Die Geschwindigkeitsgleichung der Irreversalreaktion ist etwa 1. Ordnung bezogen auf DTBP und Sauerstoff. Für die Temperaturabhängigkeit wurde der Arrhenius-Ansatz verwendet. Als Submodelle wurden das k-ε Turbulenzmodell, das Large Eddy Simulation Turbulenzmodell, das Detached Eddy Simulation Turbulenzmodell, das Scale Adaptive Simulation Turbulenzmodell, das Eddy Dissipation Verbrennungsmodell, das Rosseland Strahlungsmodell, das P1 Strahlungsmodell, das Monte Carlo Strahlungsmodell, das Discrete Transfer Strahlungsmodell und das Magnussen Rußmodell verwendet. Die simulierten maximalen Temperaturen der DTBP-Poolfeuer ergaben sich zu 1 410 K (d = 1.12 m) bzw. 1 520 K (d = 3.15 m), die gut mit den experimentell gemessenen Temperaturen übereinstimmen. Die simulierten mittleren spezifischen Ausstrahlungen für DTBP-Poolfeuer liegen bei SEP (d = 1.12 m) = 110 kW/m² und SEP (d = 3.15 m) = 180 kW/m². Die simulierten Flammenlängen der DTBP-Poolfeuer (5d ≤ H ≤ 6d) zeigen eine gute Übereinstimmung mit den gemessenen Flammenlängen. Die simulierten maximalen Strömungsgeschwindigkeiten in der Flammenmitte liegen z. B. für d = 3.15 m im Bereich von 25 m/s bis 30 m/s. Die simulierten Massenanteile an Ruß betragen 3.2∗ 10– 6 (d = 3.15 m) und 2.55∗ 10– 6 (d = 1.12 m). T3 - BAM Dissertationsreihe - 23 KW - Poolfeuer KW - Surface emissive power (SEP) KW - CFD-Simulation KW - Massenabbrandrate KW - Di-tert-butylperoxid PY - 2007 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1357 SN - 978-3-981655-0-0 SN - 1613-4249 VL - 23 SP - 1 EP - 157 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Mishra, Kirti Bhushan T1 - Experimental investigation and CFD simulation of organic peroxide pool fires (TBPB and TBPEH) N2 - Time averaged mass burning rate (m˙′′f ), flame length (H), temperature (T ), irradi- ance (E) and surface emissive power (SEP ) of TBPB (tert -butyl peroxybenzoate) and TBPEH (tert-butyl peroxy-2-ethylhexanoate) pool fires are measured for six pool di- ameters (d = 0.059 m, 0.107 m, 0.18 m, 0.5 m, 1 m and 3.4 m) at BAM in house and outside test facility. The measured heats of combustion (–Δhc) of TBPB and TBPEH are 30113 kJ/kg and 34455 kJ/kg and the specific heat capacities at constant pressure (cp) are 1.8 kJ/(kg K) and 2.1 kJ/(kg K) respectively. The measured m˙′′f of TBPB and TBPEH pool fires are in the range of 0.37 kg/(m2 s)≤ m˙ ′′ f ≤ 0.83 kg/(m2 s) and show little dependence on the pool diameter d, and are four to sixty times higher (for d = 1 m) than that of hydrocarbon pool fires. It is shown that the mass burning rates of the investigated organic peroxides can be represented as an exponential function of the self-accelerating decomposition temperature (SADT). Low SADT implies that the organic peroxide pool fires burn at a much higher m˙′′f than hydrocarbon pool fires. Fuel Froude numbers (Frf) of TBPB and TBPEH are 5 to 100 times (depending on d) higher than for hydrocarbon pool fires. Due to higher Frf the H of TBPB and TBPEH (measured with a S-VHS Videocamera) are found to be two times larger (d = 1 m) than corresponding pool fires of hydrocarbons. Heskestads flame length correlation predicts the Hd (d = 3.4 m) of TBPB and TBPEH pool fires much better than Thomas and Fay correlations. The measured time averaged flame temperatures T (d = 3.4 m) for TBPB and TBPEH pool fires are in the range of 1400 K ≤ T ≤ 1500 K and are 200 K to 300 K higher than for JP-4, kerosene and gasoline. The irradiances of the TBPB and TBPEH pool fires measured by radiometers are E (Δy/d = 0.3) = 45 kW/m2 and E = 98 kW/m2 which are two to ten times higher in comparison to the corresponding n-pentane, super gasoline and diesel pool fires. So the thermal safety distances for organic peroxide pool fires are larger by a factor four in comparison to the hydrocarbon pool fires. An infrared thermography system is used for the determination of SEP of TBPB and TBPEH pool fires. The values of surface emissive power for TBPB and TBPEH are SEP (d = 3.4 m) = 196 kW/m2 and SEP = 258 kW/m2 and thus the SEP are by a factor of approximately two higher than for hydrocarbon pool fires. A self-sustained pulsating Hd (’W’-Effect) is found in TBPB pool flames and is further analysed to explain the reason of occurance on the basis of chemical structure of the fuel and discontinuous heat flux back from flame to the liquid pool. CFD simulations of TBPB and TBPEH pool fires at d = 0.18 m, 0.5 m, 1 m, 3.4 m and 8 m are carried out using the Unsteady Reynolds Averaged Navier Stokes (URANS) equa- tions. The three-dimensional geometries have been discritized with unstructured hybrid grids, with the number of cells in the range of 1 million. Depending on the grid resolu- tion and the pool diameter time steps of 0.0001 s ≤ Δt ≤ 0.01 s for the CFD simulations are used. For solving the discritized equations a finite volume based implicit solver AN- SYS CFX has been used. For modelling the combustion, stoichiometric combustion for both peroxides are assumed. The temperature dependence of the reaction rate has been determined by the Arrhenius approach. For modelling the combustion eddy dissipation concept (EDC) model has been used. For turbulence buoyancy modified k- � and SAS (Scale Adaptive Simulation) turbulence models are used. For the thermal radiation and soot mass fraction discrete transfer radiation model and Magnusson soot model have been used. A new method is suggested for the prediction of mass burning rate (m˙′′f ) by CFD simula- tion. Both peroxide pool fires show approximately constant mass burning rate indepen- dent of d whereas m˙′′f of TBPEH are under predicted at the beginning but show relatively good agreement with measurements for large pool diameters (d = 1 m). In case of TBPB the CFD simulation over predicts the mass burning rate m˙′′f of small TBPB pool fires and shows a continuous decrease with d. CFD predicts the flame length H close to the measured data provided that the constants in Thomas equation are modified. The CFD predicted time averaged surface emission flame temperatures of TBPB and TBPEH pool fires (d = 3.4 m, 1437 K and 1542 K) are in good agreement with the measured time averaged flame temperatures. The CFD predicted SEP for TBPB and TBPEH pool fires (d = 3.4 m, 217 kW/m2 and 288 kW/m2) are also in agreement with the measured values. From the CFD predicted irradiance ECFD it is possible to determine the thermal safety distances from large pool fires of hydrocarbons and organic peroxides. T3 - BAM Dissertationsreihe - 63 KW - Pool fires KW - organic peroxides flame characteristics KW - safety distance KW - CFD simulation PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-950 SN - 978-3-9813550-6-2 SN - 1613-4249 VL - 63 SP - 1 EP - 150 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-95 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -