TY - JOUR A1 - Schmitt, R. A1 - Koerfer, F. A1 - Sadowny, O. A1 - Zimmermann, J. A1 - Krüger-Sehm, R. A1 - Xu, M. A1 - Dziomba, T. A1 - Koenders, L. A1 - Goch, G. A1 - Tausendfreund, A. A1 - Patzelt, S. A1 - Simon, S. A1 - Rockstroh, L. A1 - Bellon, Carsten A1 - Staude, Andreas A1 - Woias, P. A1 - Goldschmidtböing, F. A1 - Rabold, M. T1 - Virtuelle Messgeräte - Definition und Stand der Entwicklung N2 - Die Mikro- und Nanotechnologie gehört zu den Schlüsseltechnologien des 21. Jahrhunderts mit hohen Wachstumsprognosen, wie auch die im Auftrag des BMBF durchgeführte Studie “Nanotechnologie als wirtschaftlicher Wachstumsmarkt” von 2004 ausführlich darstellt. Aus diesem Trend resultiert ein steigender Bedarf an Messsystemen, die Nanostrukturen prozessnah bzw. im Fertigungsprozess charakterisieren können. Virtuelle Messgeräte liefern Erkenntnisse zur Entwicklung neuartiger Messsysteme, Analyse und Optimierung bestehender Verfahren sowie die Bestimmung der Messunsicherheit und modellbasierten Korrektur systematischer Fehler. Der virtuelle Messprozess umfasst neben dem Messmittel auch die Probe und die Wechselwirkungen zwischen beiden. In diesem Beitrag werden virtuelle Messgeräte vorgestellt sowie deren Anwendung diskutiert. N2 - Micro- and nanotechnology experienced a high economic growth in recent years. This yields in a growing demand for measuring instruments which are closely linked to the production process. Virtual measuring instruments provide knowledge for the development of new systems, the analysis and optimization of established devices as well as the determination of the uncertainty in measurement. The virtual measuring process consists of the measuring instrument, the sample, and the interaction between both. In this article examples of current developments of virtual instruments are presented and their way of utilization is discussed. KW - Virtuelle Messtechnik KW - Simulation KW - Messunsicherheit KW - Virtual metrology KW - Measurement uncertainty PY - 2008 DO - https://doi.org/10.1524/teme.2008.0872 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 5 SP - 298 EP - 310 PB - Oldenbourg CY - München AN - OPUS4-17569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tödt, Fritz A1 - Zimmermann, F. T1 - Die elektrochemische Messung des Suerstoffverbrauches von Hefesuspensionen und seiner Beeinflussung durch die Temperatur PY - 1957 SN - 0006-9159 VL - 79 SP - 276 EP - 277 PB - Versuchs- u. Lehranstalt für Spiritusfabrikation CY - Berlin AN - OPUS4-9971 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tödt, Fritz A1 - Zimmermann, F. T1 - Elektrochemische Messung der Atmungsgeschwindigkeit von Hefesuspensionen in verschiedenen Pufferlösungen und bei verschiedenen pH-Werten PY - 1957 SN - 0044-2623 VL - 7 SP - 271 EP - 272 PB - Bartens CY - Berlin AN - OPUS4-9972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tödt, Fritz A1 - Zimmermann, F. T1 - Additionseffekte bei der Atmung der Hefezelle PY - 1958 SN - 0932-0776 SN - 0340-5087 SN - 0044-3174 VL - 13 IS - 7 SP - 472 PB - Verl. d. Zeitschrift für Naturforschung CY - Tübingen AN - OPUS4-7803 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tödt, Fritz A1 - Zimmermann, F. T1 - Über den Einfluß der Temperatur auf die Atemgeschwindigkeit von Hefe PY - 1958 SN - 0006-9159 VL - 80 IS - 9 SP - 205 PB - Versuchs- u. Lehranstalt für Spiritusfabrikation CY - Berlin AN - OPUS4-7804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schröder, Volkmar A1 - Hieronymus, Hartmut A1 - Zimmermann, C. A1 - Seebauer, F. A1 - Wieltsch, U. T1 - Flammenausbreitung auf Flüssigkeitsoberflächen unterhalb des Flammpunktes N2 - In technischen Ozonolyseanlagen kommen gasförmige Oxidationsmittel mit brennbaren Flüssigkeiten in Kontakt. Dies geschieht in der Regel bei tiefen Temperaturen, weit unterhalb des Flammpunktes. Trotzdem ist es in einer Anlage zu einer Explosion gekommen, deren Ursache möglicherweise eine Flammenausbreitung auf der Oberfläche des Lösungsmittels war. In Laborversuchen ist dieses Phänomen in Abhängigkeit von der Gasphasenzusammensetzung, vom Lösungsmittel, vom Druck und von der Temperatur untersucht worden. KW - Anlagensicherheit KW - Flammenpropagation KW - Ozonolyse KW - Sicherheitstechnik PY - 2007 DO - https://doi.org/10.1002/cite.200700024 SN - 0009-286X SN - 1522-2640 VL - 79 IS - 12 SP - 2124 EP - 2128 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kemna, A. A1 - Binley, A. A1 - Cassiani, G. A1 - Niederleithinger, Ernst A1 - Revil, A. A1 - Slater, L. A1 - Williams, K. H. A1 - Orozco, A.F. A1 - Haegel, F.-H. A1 - Hördt, A. A1 - Kruschwitz, Sabine A1 - Leroux, V. A1 - Titov, K. A1 - Zimmermann, E. T1 - An overview of the spectral induced polarization method for near-surface applications N2 - Over the last 15 years significant advancements in induced polarization (IP) research have taken place, particularly with respect to spectral IP (SIP), concerning the understanding of the mechanisms of the IP phenomenon, the conduction of accurate and broadband laboratory measurements, the modelling and inversion of IP data for imaging purposes and the increasing application of the method in near-surface investigations. We summarize here the current state of the science of the SIP method for near-surface applications and describe which aspects still represent open issues and should be the focus of future research efforts. Significant progress has been made over the last decade in the understanding of the microscopic mechanisms of IP; however, integrated mechanistic models involving different possible polarization processes at the grain/pore scale are still lacking. A prerequisite for the advances in the mechanistic understanding of IP was the development of improved laboratory instrumentation, which has led to a continuously growing data base of SIP measurements on various soil and rock samples. We summarize the experience of numerous experimental studies by formulating key recommendations for reliable SIP laboratory measurements. To make use of the established theoretical and empirical relationships between SIP characteristics and target petrophysical properties at the field scale, sophisticated forward modelling and inversion algorithms are needed. Considerable progress has also been made in this field, in particular with the development of complex resistivity algorithms allowing the modelling and inversion of IP data in the frequency domain. The ultimate goal for the future are algorithms and codes for the integral inversion of 3D, time-lapse and multi-frequency IP data, which defines a 5D inversion problem involving the dimensions space (for imaging), time (for monitoring) and frequency (for spectroscopy). We also offer guidelines for reliable and accurate measurements of IP spectra, which are essential for improved understanding of IP mechanisms and their links to physical, chemical and biological properties of interest. We believe that the SIP method offers potential for subsurface structure and process characterization, in particular in hydrogeophysical and biogeophysical studies. KW - Induced polarisation KW - Review KW - Moisture KW - Soil KW - Masonry resistivity PY - 2012 DO - https://doi.org/10.3997/1873-0604.2012027 SN - 1569-4445 VL - 101 IS - 6 SP - 453 EP - 468 PB - EAGE - European Association of Geoscientists & Engineers CY - Houten AN - OPUS4-27433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -