TY - CONF A1 - Liao, Chun-Man A1 - Petryna, Y. T1 - Damage Assessment of Civil Structures Using Wave Propagation Analysis and Transmissibility Functions N2 - A common damage detection method in civil engineering is to monitor dynamic characteristics such as natural frequencies and modal shapes, which are directly related to the structural stiffness. However, the discrepancy in measured natural frequencies may result from environmental changes, the soil-structure interaction or effects caused by earthquakes. This makes it difficult to decide whether the local change in structural properties is caused by damage or other factors. To address this challenge and thus improve the current damage detection method, the wave propagation analysis method and the transmissibility relationship were considered. In our study, the wave propagation field in structures was reconstructed by applying the Normalized-Input-Output-Minimization (NIOM) method to vibration recordings. Wave velocities and transmissibility functions were considered as reference values for the damage indicators. This paper demonstrates the evaluation of local property changes in two examples of large-scale structures: a 14-story RC building and a 64 m long pedestrian bridge. The proposed damage indicators show a clear correspondence to structural changes. T2 - EVACES2021 9th International Conference on Experimental Vibration Analysis for Civil Engineering Structures CY - Online meeting DA - 14.09.2021 KW - Damage detection KW - Damage indices KW - Normalized-Input-Output-Minimization KW - Transmissibility function KW - Wave propagation PY - 2022 SN - 978-3-030-93235-0 SN - 978-3-030-93236-7 U6 - https://doi.org/10.1007/978-3-030-93236-7_2 SP - 3 EP - 13 PB - Springer CY - Cham AN - OPUS4-55565 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Marc A1 - Petryna, Y. A1 - Rogge, Andreas ED - Saouma, V. ED - Bolander, J. ED - Landis, E. T1 - Experimental investigation of damage evolution in concrete under high-cycle fatigue N2 - The current knowledge about fatigue behavior of concrete is still incomplete. This concerns especially the progress of fatigue which precedes the fatigue failure. Therefore, the process of fatigue itself under cyclic compressive loading was investigated in a systematic and comprehensive way. The aim of this investigation was to obtain a deeper insight and to provide a better understanding of the damage process occurring within the material during fatigue loading. Concrete cylinders were tested with a number of cycles to failure between 106 and 107. To investigate macroscopic and microscopic changes in the material, various methods of non-destructive and destructive testing were used. One main result was, in contrast to other authors, that the investigated changes in macroscopic material behavior could not be explained only by a development of micro-cracks. The results indicated rather, that the related changes in the fatigue behavior are mainly a result of viscous processes in the hardened cement paste, similar to the processes of creep. Based on the experimental results a description of the possible processes was derived which take place in the material structure during fatigue loading and also leads to the observed macroscopic changes in the material behavior. In this context, the results have shown that in case of isotropic material behavior a stiffness reduction related to a scalar value could not capture the damage effect on the stress-strain-relationship caused by fatigue. T2 - The 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures CY - Berkeley, CA, USA DA - 29.5.2016 KW - Fatigue KW - Concrete KW - High-Cycle KW - Damage Evolution PY - 2016 U6 - https://doi.org/10.21012/FC9.302 SP - 1 EP - 9 AN - OPUS4-36686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hille, Falk A1 - Petryna, Y. A1 - Rücker, Werner ED - Cunha, A. ED - Caetano, E. ED - Ribeiro, P. ED - Müller, G. T1 - Subspace-based detection of fatigue damage on a steel frame laboratory structure for offshore applications N2 - Altematively to common modal analysis as tool for detectmg changes between a reference and an actual (possibly damaged) structural state, the subspace-based damage detection method has been developed in recent years and successfully adopted to test application data sets. Characteristic for that method is that instead of analyzing modal parameters, a Statistical test with respect to changes of a dynamic signature of structural response is introduced. Therefor, a Gaussian residual vector is extracted from the subspace of an output only Vibration data covariance matrix within the reference state. The paper describes the application of this damage detection method within a laboratory fatigue test on a Steel frame structure. Aim of the investigation was to analyze the usability and efficiency of the detection method for realistic damage on carrying structures of wind energy turbines. In a second Step, a numerical model of the lab test structure is developed and validated. Thus, a comparable numerical Simulation of the fatigue damage detection was feasible and the accuracy of the Simulation procedure could be verified. The present study describes the first Step in a two-step approach for quantifying and optimizing fundamental characteristics of SHM Systems for offshore wind turbine structures concerning a required number of sensors and their optimal location. T2 - EURODYN 2014 - 9th International conference on structural dynamics CY - Porto, Portugal DA - 30.06.2014 KW - Damage detection KW - Offshore wind energy KW - Subspace-based detection KW - Schadensdetektion KW - Offshore-Windenergie KW - Subspace-basierte Verfahren PY - 2014 UR - http://paginas.fe.up.pt/~eurodyn2014//CD/papers/506_MS25_ABS_1788.pdf SN - 978-972-752-165-4 SN - 2311-9020 SP - MS25, 3595 EP - 3602 AN - OPUS4-31219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hille, Falk A1 - Petryna, Y. A1 - Rücker, Werner T1 - Subspace-based detection of fatigue damage on jacket support structures of offshore wind turbines N2 - The paper describes the application of the Stochastic Subspace-based Damage Detection (SSDD) method on model structures for an utilization of this approach on offshore wind turbine structures. Aim of the study was therefore to analyze the usability and efficiency of the detection method as well as to determine an optimized set of parameter for realistic damage on support structures of wind energy turbines. Based on results of an experimental fatigue test on a Steel frame laboratory structure a strategy for a numerical verification of the experimentally evolved damage detection was developed, utilizing a time integration approach to simulate the dynamic response. In a second Step the identified modeling and computing methodology is used to numerically investigate the ability to detect damage in real size structural components of offshore wind turbines. T2 - EWSHM 2014 - 7th European workshop on structural health monitoring CY - Nantes, France DA - 08.07.2014 KW - Damage detection KW - Offshore wind turbines KW - Numerical response PY - 2014 SP - 229 EP - 236 AN - OPUS4-31218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Marc A1 - Petryna, Y. A1 - Rogge, Andreas ED - Saouma, V. ED - Bolander, J. ED - Landis, E. T1 - Experimental investigation of damage evolution in concrete under high-cycle fatigue N2 - The current knowledge about fatigue behavior of concrete is still incomplete. This concerns especially the progress of fatigue which precedes the fatigue failure. Therefore, the process of fatigue itself under cyclic compressive loading was investigated in a systematic and comprehensive way. The aim of this investigation was to obtain a deeper insight and to provide a better understanding of the damage process occurring within the material during fatigue loading. Concrete cylinders were tested with a number of cycles to failure between 106 and 107. To investigate macroscopic and microscopic changes in the material, various methods of non-destructive and destructive testing were used. One main result was, in contrast to other authors, that the investigated changes in macroscopic material behavior could not be explained only by a development of micro-cracks. The results indicated rather, that the related changes in the fatigue behavior are mainly a result of viscous processes in the hardened cement paste, similar to the processes of creep. Based on the experimental results a description of the possible processes was derived which take place in the material structure during fatigue loading and also leads to the observed macroscopic changes in the material behavior. In this context, the results have shown that in case of isotropic material behavior a stiffness reduction related to a scalar value could not capture the damage effect on the stress-strain-relationship caused by fatigue. T2 - The 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures CY - Berkeley, CA, USA DA - 29.5.2016 KW - Fatigue KW - Concrete KW - High-cycle KW - Damage evolution PY - 2016 U6 - https://doi.org/10.21012/FC9.302 SP - 1 EP - 9 AN - OPUS4-38242 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hille, Falk A1 - Petryna, Y. T1 - Monitoring und Schadensdetektion an Tragstrukturen von Offshore-Windenergieanlagen N2 - Mit dem generellen Ziel, die Anwendbarkeit und Funktionalität des Verfahrens der stochastischen subspace-basierten Schadensdetektion für Strukturen von Offshore-Windenergieanlagen nachzuweisen, wurden experimentelle und numerische Untersuchungen an einer Laborstruktur sowie anschließend numerische Untersuchungen an einer OWEA-Gründungsstruktur durchgeführt. Das zugrundeliegende Verfahren verwendet einen Ansatz, in weder modale Kenngrößen noch andere benutzerdefinierte Eingaben erfordert, nachdem einmalig der Referenzzustand aufgenommen wurde. Dabei werden ausschließlich dem Belastungsprozess inhärente stochastische Anregungen der betrachteten Struktur genutzt. Auf der Basis experimentell erzielter Detektionsergebnisse aus einem Ermüdungsversuch an einer Laborstruktur aus Stahl wurden numerische Modelle und Berechnungsalgorithmen entwickelt und getestet. In einem zweiten Schritt wird diese Analysemethodik auf eine fiktive OWEA-Jacketstruktur realer Größe angewendet. An den simulierten Strukturantworten im Ungeschädigten und geschädigten Zustand wird der Detektionsalgorithmus angewendet, um den Einfluss von Sensorposition und Abtastrate auf die Schadensdetektion festzustellen. Unter Berücksichtigung einzelner vereinfachender Annahmen zeigten die Ergebnisse der Anwendung der vorgestellten Detektionsmethodik an den numerisch erzeugte Antwortdatensätzen eine beachtliche Empfindlichkeit des x2-Testwert basierten Schadensindikators. Obwohl nicht unter allen Umständen in einem frühen Stadium nachweisbar, typische Ermüdungsrisse in Schweißverbindungen von aufgelösten Tragwerken haben ab einer Restbiegesteifigkeit von ca. 80% einen signifikanten und detektierbaren Einfluss auf den Schadensindikator. Künftige Forschungsaktivitäten in diesem Bereich sollten neben der Erkennung von Schäden auch die Lokalisierung und ggf. auch die Quantifizierung zum Ziel haben. Erforderlich dazu ist die Berücksichtigung und Verarbeitung der strukturellen Parameter und ihrer Sensitivitäten im zugrunde liegenden mathematischen Modell. T2 - Messen im Bauwesen 2015 - Automatisierte Messdatenverarbeitung CY - Berlin, Germany DA - 03.03.2015 KW - Structural health monitoring KW - Schadensdetektion KW - Offshore-Windenergieanlagen PY - 2015 SN - 978-3-9816668-5-4 SP - 113 EP - 125 AN - OPUS4-32813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, Marc A1 - Petryna, Y. A1 - Rogge, Andreas A1 - Baeßler, Matthias ED - Beushausen, Hans T1 - Experimental investigation of fatigue process in concrete under high-cycle loading N2 - Fatigue is of relevance not only for metals but also for concrete. The current knowledge about fatigue behaviour of concrete is, however, incomplete. This concerns especially the progress of fatigue which precedes the fatigue failure. Some macroscopic effects of this process are well known but the governing material changes behind them are still less studied. The focus of the present contribution lay on a systematic and comprehensive investigation of the fatigue process under cyclic compressive loading. The aim was to obtain a deeper insight and to provide a better understanding of the damage process in the material. Cylindrical specimens were tested with a number of cycles to failure between 106 and 107. Various methods of non-destructive and destructive testing were used to investigate macroscopic and microscopic changes in the material. One main result was that the changes in the macroscopic material behaviour could not be explained only by the development of micro cracks. The results indicated that the related changes in the fatigue behaviour originate rather from viscous processes in the cement stone, similar to the process of creep. A sound description of the possible processes was derived from the obtained experimental results which concerns material structure during fatigue loading. It has been shown that in case of isotropic material behaviour a stiffness reduction related to a scalar value could not capture the damage effect on the stress-strain relationship caused by fatigue. T2 - fib symposium 2016 CY - Cape Town, South Africa DA - 21.11.2016 KW - High-cycle KW - Fatigue KW - Concrete KW - Damage evolution PY - 2016 SN - 978-2-88394-121-2 VL - 2016 SP - 1 EP - 10 PB - University of Cape Town CY - Cape Town AN - OPUS4-38720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -