TY - RPRT A1 - Schmidt, R. A1 - Klingenberg, G. A1 - Woydt, Mathias T1 - New lubrication concepts for environmental friendly machines N2 - The use of alternative oils for the lubrication of automobile engines has a potential of ecological and technical advantages. It requires the detailed knowledge of several thermophysical and viscometric properties in a large temperature range (mapping). Therefore, the following properties of up to twenty-eight different oils have been measured in the temperature range from 22 °C to 150 °C: density, heat capacity, thermal conductivity, viscosity at ambient pressure, viscosity under shear rates above 10 6 s-1, and the viscosity at elevated pressures (maximum 100 MPa). The last two have been measured with a substantially improved and a newly developed apparatus, respectively. The pressure- viscosity coefficient has been measured on four hydrocarbon-based, factory-fill oils, a paraffin oil and twenty-three alternative oils. Nine of the alternative oils are based partly or completely on esters, the other fourteen on polyglycols, two of them additionally on water. T3 - BAM Forschungsberichtreihe - 277 KW - Polyglycol KW - Ester KW - PAG KW - PPG KW - Factory fill KW - Hydrocarbon KW - Bio-no-tox oils KW - Engine oil KW - Bio-oils KW - EAL KW - Eco-lubricants KW - Heat capacity PY - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1748 SN - 978-3-86509-528-3 SN - 0938-5533 VL - 277 SP - 1 EP - 59 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Effner, Ute A1 - Woydt, Mathias T1 - Wälzverschleiß und Endbearbeitung von Ingenieurkeramiken N2 - Keramische Werkstoffe haben auf Grund ihrer herausragenden tribologischen Eigenschaften in verschiedenen Bereichen der Produktion Anwendung gefunden und dadurch klassische Werkstoffe verdrängt. Gegenüber Matallen bieten sie bei Mangelschmierung sowohl unter Gleit- als auch grundsätzlich unter Wälz-beanspruchung Schutz vor adhäsivem Versagen. Hohe Herstellungskosten, bedingt bei der Endbearbeitung von Konturen mit verschiedenen und veränderlichen Radien, behindern die breite Marktdurchdringung. Mit der Modellverschleißprüfung - angelehnt an die DIN 50 324 - kann der bearbeitungsbedingte Einfluss auf das tribologische Verhalten unter Wälzreibung untersucht werden. T3 - BAM Forschungsberichtreihe - 237 PY - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-2135 SN - 978-3-89701-520-X SN - 0938-5533 VL - 237 SP - 1 EP - 75 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Effner, Ute A1 - Woydt, Mathias T1 - Slip-Rolling and Machining of Engineering Ceramics N2 - Englische Übersetzung von BAM Forschungsbericht 237! Keramische Werkstoffe haben auf Grund ihrer herausragenden tribologischen Eigenschaften in verschiedenen Bereichen der Produktion Anwendung gefunden und dadurch klassische Werkstoffe verdrängt. Gegenüber Metallen bieten sie bei Mangelschmierung sowohl unter Gleit- als auch grundsätzlich unter Wälzbeanspruchung Schutz vor adhäsivem Versagen. Hohe Herstellungskosten, bedingt bei der Endbearbeitung von Konturen mit verschiedenen und veränderlichen Radien, behindern die breite Marktdurchdringung. Mit der Modellverschleißprüfung - angelehnt an die DIN 50 324 - kann der bearbeitungsbedingte Einfluss auf das tribologische Verhalten unter Wälzreibung untersucht werden. T3 - BAM Forschungsberichtreihe - 259 PY - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1928 SN - 978-3-89701-976-0 SN - 0938-5533 VL - 259 SP - 1 EP - 68 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-192 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Löffelbein, Bernd A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Reibungs- und Verschleißuntersuchungen an Gleitpaarungen aus ingenieurkeramischen Werkstoffen in wäßrigen Lösungen N2 - Neben einer Literaturübersicht z. tribologischen Verhalten ingenieurkeramischer Werkstoffe in wässrigen Zwischenstoffen bzw. feuchter Umgebung werden Ergebnisse zum Reibungs- u. Verschleißverhalten von 6 kommerziellen keramischen Werkstoffen vorgestellt. T3 - BAM Forschungsberichtreihe - 186 PY - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-2648 SN - 978-3-89429-21-1 SN - 0938-5533 VL - 186 SP - 1 EP - 86 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Technisch-physikalische Grundlagen zum tribologischen Verhalten keramischer Werkstoffe – Literaturübersicht N2 - Darstellung der Anwendungen und Zukunftsperspektiven keramischer Werkstoffe zur Reibungs- und Verschleißminderung und Beschreibung der Beweggründe für den Einsatz von Keramik im High-Tech-Bereich sowie deren Wandel mit fortschreitendem Entwicklungsstand. Anschließend folgen Arbeiten, die sich mit der Reaktion keramischer Oberflächen auf statische und tribologische Gleitbeanspruchungen befassen. T3 - BAM Forschungsberichtreihe - 133 KW - Keramik KW - Siliziumkarbid KW - Siliziumnitrid KW - Zirkonoxid KW - Aluminiumtitanat KW - Aluminiumoxid KW - Rißbildung KW - Turbinenbau KW - Kreiskolbenmotor KW - Dichtleiste PY - 1988 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-3173 SN - 978-3-88314-609-9 SN - 0938-5533 VL - 133 SP - 1 EP - 104 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kloß, Heinz A1 - Woydt, Mathias A1 - Willmann, G. T1 - Temperaturberechnung an den Artikulationsflächen beim künstlichen Hüftgelenk KW - Hüftgelenkersatz KW - Aluminiumoxid KW - Zirkondioxid KW - Blitztemperatur KW - Tribologie KW - Oberflächentopographie PY - 2001 SN - 0933-5137 SN - 1521-4052 VL - 32 IS - 2 SP - 30 S. PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kloß, Heinz A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Predicition of the Tribological Performance of Sliding Systems T2 - 13th International Colloquium Tribology CY - Ostfildern, Germany DA - 2002-01-15 PY - 2002 SN - 3-924813-48-5 VL - 2 SP - 839 EP - 845 PB - Technische Akademie Esslingen CY - Ostfildern AN - OPUS4-1290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Yarim, Rasim A1 - Wäsche, Rolf A1 - Woydt, Mathias ED - Franek, F. T1 - Wear Behaviour of SiC-TiC-TiB2 Ceramic Composites Sliding against SiC up to 800°C and 2m/s T2 - 2nd World Tribology Congress ; 2nd WTC 2001 CY - Vienna, Austria DA - 2001-09-03 KW - Dry sliding KW - Tribochemistry KW - Silicon carbide KW - Titanium carbide KW - Titanium boride KW - High temperature KW - Ceramic composites PY - 2001 SN - 3-901657-07-X SP - 1(?) EP - 4(?) PB - ÖTG CY - Wien AN - OPUS4-1438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binkowski, Sigrid A1 - Pahl, Regina A1 - Woydt, Mathias T1 - Vergleich der Präparationsverfahren an Gefügen keramischer Werkstoffe N2 - Der Artikel beschreibt verschiedene materialographische Präparationsverfahren und zeigt Aufnahmen von einer ganzen Reihe unterschiedlicher Keramiken, die mit verschiedenen Untersuchungsmethoden gemacht wurden. PY - 2002 UR - http://www.struers.com/resources/elements/12/3699/39art2_de.pdf IS - 39 SP - 8 EP - 19 PB - Struers CY - Willich AN - OPUS4-1471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Skopp, André A1 - Woydt, Mathias T1 - Expertise on ceramic type coatings: Compilation of the macroscopic, microscopic and micro analytical results of samples coated with present solution of 8Y2O3oZrO2 rub tested against SiC tipped IN 718 blade - Work package 4 N2 - Gas turbine efficiency is significantly influenced by the pressure losses caused by the inevitable gap between the rotating turbine blades and the stator parts. Because contact between rotor and stator cannot be completely avoided with a small gap, systems are designed to allow for some rubbing. Honeycombs or abradable MCrAlY stator coatings are normally used to minimize the wear of the rotor blades when rubbing occurs. But, more efficient solutions must be developed on modern engines, because both suffer temperature limitation and standard MCrAlY have usually poor abradability. For higher temperature and closer control of the gap, a thick thermal-barrier coating must be applied on the stator, but presently with no rub-tolerance. To increase the abradability of the stator coating, its composition and structure can be modified, but such changes must be strictly limited with respect to the loss of erosion resistance. The solution can then lie in the hardening of the rotating blade tip to permit the use of harder ceramic or metallic coatings on the stator with greater resistance to erosion. These systems typically consist, on the blade tip, of hard particles embedded in a softer metallic matrix. In the present programme, it is therefore intended: - to assess the present European solutions, standard or in development, for outer air seals and blade tips. - to develop coated grits or new grits for the hardening of the blade tips, as well as to improve the matrix and the stator coating for long life systems. - to optimize the most promising of these systems, that will be tested on development rigs and on engine. The consortium includes several engine manufacturers, which are the potential users of the innovating solutions to be developed, companies having a large experience in the field of abradables and tip coatings and non industrial partners involved in tribology and materials science. T2 - Project 2. Advanced Abradables and Tip Coatings for Gas Turbines (BRITE-EURAM BRPR960187) CY - Berlin, Germany DA - 1998-01-01 PY - 1998 SN - 92-828-3230-9 SN - 1018-5593 IS - 17766 SP - 1(?) EP - 244(?) PB - Off. for Off. Publ. of the Europ. Communities CY - Luxembourg AN - OPUS4-2426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kloß, Heinz A1 - Skopp, André A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Wear prediction in ultra-high speed and high temperature applications PY - 2000 SN - 3-924813-44-2 VL - 3 SP - 1639 EP - 1646 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2427 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Gienau, Michael A1 - Habig, Karl-Heinz T1 - Hochtemperaturtribometer für Reibungs- und Verschleißprüfungen bis 1000°C PY - 1987 SN - 0025-5300 VL - 29 IS - 7/8 SP - 197 EP - 199 PB - Carl Hanser Verlag CY - München AN - OPUS4-2438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ketting, M. A1 - Tintrup, F. A1 - Halama, H. A1 - Woydt, Mathias A1 - Tomaszewski, J. T1 - Fahrerprobung gleitlackgeschmierter Kettenglieder T2 - TAE-Lehrgang "Festschmierstoffe" CY - Ostfildern-Nellingen, Deutschland DA - 2002-06-05 PY - 2002 SN - 0724-3472 VL - 49 PB - Expert Verlag CY - Renningen AN - OPUS4-2439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Tribologisches Hochtemperaturverhalten keramischer Werkstoffe unter Festkörperreibungsbedingungen T2 - VDI-Werkstofftag CY - München, Deutschland DA - 1988-03-15 PY - 1988 SN - 3-18-090670-7 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 670 SP - 683 EP - 697 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Influence of Temperature and Sliding Speed on Friction and Wear of SiSiC and MgO-ZrO2 T2 - 12th Annual Conference on Advanced and Comp. Ceramics CY - Cocoa Beach, FL, USA DA - 1988-01-17 PY - 1988 IS - 9-10 SP - 1419 EP - 1430 AN - OPUS4-2441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chavanes, A. A1 - Pauty, E. A1 - Woydt, Mathias T1 - Titanium-Molybdenum Carbonitride as Light-Weight and Wear Resistant Monolithic Material N2 - This paper presents the friction and wear behaviour of monolithic titanium-molybdenum carbonitride and tungsten carbide. These materials have been tested sliding against themselves, carbons, fibre reinforced glasses and molybdenum coatings and compared to other ceramics and ceramics composites under unlubricated condition up to 800 °C and 6 m/s. Self-mated sliding couples of titanium-molybdenum carbonitride display, especially under high-temperature friction, a pronounced wear resistance compared to ceramics and ceramic–ceramic composites. This very good property is due to the tribo-oxidative formation of so-called “lubricious oxides”, e.g. Magnéli phases of rutile. They exhibit sliding wear rates under unlubricated friction up to 800 °C as known from mixed/boundary lubrication. Within the different test conditions, the wear rates of a variety of stationary monolithic materials samples sliding against rotating specimen of (Ti, Mo)(C, N) are always in the group with the lowest wear rates. The association of the wear resistance, mechanical strength, fracture toughness and low density makes the (Ti, Mo)(C, N) material a complete solution for complex customer demands. KW - Titanium-molybdenum carbonitride KW - Lubrication KW - Wear rate PY - 2004 U6 - https://doi.org/10.1016/S0043-1648(03)00513-1 SN - 0043-1648 VL - 256 SP - 647 EP - 656 PB - Elsevier CY - Amsterdam AN - OPUS4-2442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias T1 - Tribological characteristics of polycrystalline Magnéli-type titanium dioxides N2 - The results presented in this paper have clarified experimentally, that titania-based Magnéli-phases (Ti4O7/Ti5O9 and Ti6O11) with (121)-shear planes exhibit more anti-wear properties than lubricious (low-frictional) properties. The results for dry sliding indicate that the coefficients of friction lie in the range of 0.1–0.6 depending on sliding speed and ambient temperature. The COF decreased with increasing temperature (T= 22–800°C) and increasing sliding speed (?= 1-6 m/s). The dry sliding wear rate was lowest for the Al2O3 at 1 m/s at 800°C with values of 1.7 × 10-8 and 6.4 × 10-8 mm3/N m, comparable to boundary/mixed lubrication, associated with a high dry frictional power loss of 30 W/mm2. The running-in wear length and, more important, the wear rate decreased under oscillating sliding tests with increasing relative humidity. The contact pressure for high-/low-wear transition increased under oscillating sliding tests with increasing relative humidity. At room temperature and a relative humidity of 100% the steady-state wear rate under dry oscillating sliding for the couple Al2O3/Ti4O7–Ti5O9 was lower than 2 × 10-7 mm3/N m and therefore inferior to the resolution of the continuous wear measurement sensor. TEM of wear tracks from oscillating sliding revealed at room temperature a work-hardening as mechanism to explain the running-in behavior and the high wear resistance. The hydroxylation of titania surfaces favours the high-/low-wear transition. KW - Magnéli-phases KW - Shear planes KW - Planar defects KW - Ceramics KW - Dry friction KW - High temperature KW - Titania KW - Wear KW - Work-hardening KW - TEM KW - Humidity PY - 2000 U6 - https://doi.org/10.1023/A:1019170831371 SN - 1023-8883 SN - 1573-2711 VL - 8 SP - 117 EP - 130 PB - Springer Science Business Media B.V. CY - Dordrecht AN - OPUS4-2443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Czichos, Horst T1 - Entwicklungstendenzen tribotechnischer Werkstoffe für den Fahrzeugbau - Teil 1 PY - 1988 SN - 0001-2785 VL - 90 IS - 5 SP - 237 EP - 246 PB - Vieweg CY - Wiesbaden AN - OPUS4-2444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Czichos, Horst T1 - Entwicklungstendenzen tribotechnischer Werkstoffe für den Fahrzeugbau - Teil 2 PY - 1988 SN - 0001-2785 VL - 90 IS - 7/8 SP - 415 EP - 421 PB - Vieweg CY - Wiesbaden AN - OPUS4-2445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - High temperature tribology of ceramics KW - Ceramics KW - Alumina KW - Zirconia KW - Friction KW - Wear KW - Sliding PY - 1989 SN - 0301-679X SP - 75 EP - 90 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-2446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Steinmann, D. T1 - Keramische Werkstoffe für umweltgerecht gestaltete Tribosysteme PY - 1990 SN - 0026-0746 VL - 44 IS - 9 SP - 843 EP - 848 PB - Giesel Verlag GmbH CY - Isernhagen AN - OPUS4-2447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Klaffke, Dieter A1 - Habig, Karl-Heinz A1 - Czichos, Horst T1 - Tribological transition phenomena of ceramic materials PY - 1990 SN - 0043-1648 VL - 136 SP - 373 EP - 381 PB - Elsevier CY - Amsterdam AN - OPUS4-2448 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz ED - Ludema, K. C. T1 - High temperature sliding friction and wear of silicon infiltrated silicon carbide T2 - 7th International Conference on Wear of Materials CY - Denver, CO, USA DA - 1989-04-09 PY - 1989 SN - 0-7918-0304-X VL - 1 SP - 419 EP - 429 PB - American Soc. of Mechanical Engineers CY - New York, NY AN - OPUS4-2449 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Klaffke, Dieter A1 - Habig, Karl-Heinz T1 - Sliding and Fretting Wear of MgO-ZrO2 PY - 1988 SN - 0-87170-331-9 SP - 71 EP - 78 PB - ASM International CY - Gaithersburg AN - OPUS4-2450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Habig, Karl-Heinz ED - Friedrich, K. T1 - Sliding friction and wear of Al2O3, ZrO2, SiC and Si3N4 PY - 1989 SN - 0-444-42524-1 SN - 0927-0108 N1 - Serientitel: Composite materials series – Series title: Composite materials series IS - 1 SP - 106 EP - 113 PB - Elsevier CY - Amsterdam AN - OPUS4-2451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Effner, Ute ED - Bartz, Wilfried J. T1 - Der Einfluss des E-Moduls und des Grundöls auf das Wälzverhalten von DLC- und Diamantbeschichtungen T2 - 14th International Colloquium Tribology "Tribology and Lubrication Engineering" CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 583 EP - 591 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Spaltmann, Dirk A1 - Löhr, Manuel A1 - Woydt, Mathias ED - Bartz, Wilfried J. T1 - Gibt es eine Korrelation zwischen der Topographie von DLC-Schichten und ihrem Verhalten unter geschmierter Wälzbeanspruchung? T2 - 14th International Colloquium Tribology "Tribology and Lubrication Engineering" CY - Stuttgart, Deutschland DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 631 EP - 639 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Effner, Ute A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Woydt, Mathias T1 - Überrollbeständige DLC-Schichten unter Wälzverschleißbedingungen bis 2 GPa? T2 - Tribologie-Fachtagung 2002 CY - Göttingen, Deutschland DA - 2002-09-23 PY - 2002 SN - 3-00-003404-8 VL - 1 SP - 17-1-17-11 PB - GfT CY - Moers AN - OPUS4-3422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Klaffke, Dieter A1 - Löhr, Manuel A1 - Spaltmann, Dirk A1 - Woydt, Mathias A1 - Santner, Erich ED - Franek, F. ED - Pauschitz, A. T1 - Zuverlässige Wälzsysteme durch DLC-Schichten? Bedeutung und Aufgaben von Schichtsystemen T2 - Symposium der Österreichischen Tribologischen Gesellschaft CY - Wien, Österreich DA - 2003-11-20 PY - 2003 SN - 3-901657-13-4 SP - 59 EP - 68 PB - ÖTG CY - Wien AN - OPUS4-3131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gienau, Michael A1 - Kelling, Norbert A1 - Köhler, Norbert A1 - Woydt, Mathias T1 - Ultra-High-Temperature Tribometer up to 1600°C KW - Ultrahochtemperaturtribometer KW - Ultrahigh temperature tribometer KW - Body flap KW - Control surfaces KW - Friction and wear PY - 2004 SN - 0196-6219 SN - 1940-6339 VL - 25 IS - 4 SP - 333 EP - 334 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-3112 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kleemann, J. A1 - Woydt, Mathias T1 - Dry friction and wear rates as under liquid lubrication of ceramic/carbon couples up to 450°C N2 - In a high temperature tribometer, stationary carbon has been tested against different rotating ceramics (SiC, Si3N4, Al2O3, WC-6Ni, MgO-ZrO2, (Ti, Mo)(C, N)) and stainless steel (DIN 1.4876). The rotating discs were grinded, polished and/or lapped. For most material combinations, the wear morphology is known from available literature. A transfer film with a typical wear pattern was found on the rotating disc. The combination of antimony graphite EK3245 against MgO-ZrO2 did not form carbonaceous transfer layer. Through advanced variation of the roughness up to Rpk=0.011?µm, the wear rate has been reduced to Kv ˜ 3.5×10-8?mm3/N?m at a stable coefficient of friction in a “millirange” of µ~0.008 for a sliding distance of 20.000?m. KW - Tribology KW - Lubrication KW - Ceramics KW - Carbon KW - Liquids PY - 2004 U6 - https://doi.org/10.1108/00368790410515371 SN - 0036-8792 VL - 56 IS - 1 SP - 38 EP - 51 PB - Peterson CY - Droitwich, Worcs. AN - OPUS4-3314 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Kelling, Norbert A1 - Buchmann, M. T1 - Thermisch gespritzte, keramische Zylinderlaufbahnen unter Misch-/Grenzreibung N2 - Einen großen Beitrag zur Gewichtseinsparung leistet die Substitution von Grauguss-Legierungen durch moderne Aluminiumlegierungen für Pkw Kurbelgehäuse. Zur Erhöhung der tribologischen und thermomechanischen Belastungsgrenzen von Aluminiumoberflächen kommen thermisch gespritzte Schichten in Frage. Zielsetzung nachfolgender Untersuchungen ist es außermotorisch unter Misch-/Grenzreibung das tribologische Potenzial von thermisch gespritzten keramischen Schichtwerkstoffen auf Basis der Stoffsysteme Cr2O3, Cr2O3/TiO2, Cr3C2/NiCr, TiO2, TiO2/Al2O3 im Vergleich zu aktuell serienmäßig eingesetzten Graugusswerkstoffen zu ermitteln. Die Oberflächentopographien und die Schmierstoffe determinieren gegenüber GG26Cr die Verschleißsenkungspotenziale der keramischen Schichten. Eine Reduzierung der Reibungszahlen wird nicht durch keramische Oberflächenbeschichtungen, sondern durch den Einsatz von Polyglykolen als Schmiermedium erzielt. T2 - DGM-Tagung "Reibung und Verschleiß", Deutsche Gesellschaft für Materialkunde e.V. (DGM) CY - Fürth, Deutschland DA - 2004-03-10 KW - Kolbenring KW - Zylinderlaufbahn KW - Tribometer KW - Mischreibung KW - Polyglykol KW - Thermisches Spritzen KW - Cr2O3 KW - Cr2O3/TiO2 KW - Cr3C2/NiCr KW - TiO2 KW - TiO2/Al2O3 KW - Piston ring KW - Cylinder liner KW - Mixed lubrication KW - Polyglycol KW - Thermal spraying PY - 2004 U6 - https://doi.org/10.1002/mawe.200400799 SN - 0933-5137 SN - 1521-4052 VL - 35 IS - 10/11 SP - 824 EP - 829 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-3240 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André A1 - Dörfel, Ilona A1 - Witke, Klaus T1 - Wear Engineering Oxides / Antiwear Oxides KW - Oxid KW - Hochtemperatur KW - Keramik KW - Reibung PY - 1999 SN - 1040-2004 SN - 1547-397X IS - 42,1 SP - 21 EP - 31 PB - Taylor & Francis CY - Philadelphia, Pa. AN - OPUS4-711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witke, Klaus A1 - Österle, Werner A1 - Skopp, André A1 - Woydt, Mathias T1 - Raman microprobe spectroscopy and transmission electron microscopy of thermal sprayed ZrO2 coatings before and after rub testing of outer air seals N2 - 8 wt% Y2O3-ZrO2 spray powder and thermally sprayed as thermal barrier coatings on outer air seals were characterized by Raman microprobe spectroscopy (RMS) and transmission electron microscopy to investigate the lateral distribution, composition, structure and grain size of ZrO2 phases and to separate ZrO2 and Y2O3. RMS of transfer layers on ZrO2-coated shrouds after rub tests against SiC laser-tipped metallic blades showed the formation of metallic oxides MeIMeII2O4 of spinel type. Wear tracks were partly covered by graphite and spinel-type oxides. In some cases, the latter were better detectable after laser enhanced cleaning by burning off the covering carbon layer. PY - 2001 U6 - https://doi.org/10.1002/jrs.791 SN - 0377-0486 SN - 1097-4555 VL - 32 IS - 12 SP - 1008 EP - 1014 PB - Wiley CY - Chichester AN - OPUS4-1230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias T1 - Influence des conditions d'essais sur les données tribologiques N2 - Plusieurs essais coopératifs multilaboratoires ont été effectués en 1997, 1998, 1999, 2000 et 2001 par le groupe de travail DIN 51834 Essais tribologiques dans l'appareil translation-oscillation. Il s'agit d'essais effectués sur des machines différentes et dans différents lieux. Pour simplifier, on les dénomme essais circulaires. L'analyse statistique des résultats a examiné l'influence du choix du solvant, du modèle de l'appareil et des paramètres sur les caractéristiques tribologiques des différentes huiles. Le coefficient de frottement et les taux d'usure peuvent être classés selon les dix différents solvants utilisés: l'isopropanol donne des coefficients de frottement plutôt bas et l'isoparaffine des coefficients plutôt élevés. La variation du coefficient de frottement selon le modèle de machine se situe entre 0,2 % et 0,9 % et les taux d'usure ne sont pas non plus affectés par les solvants. Le diamètre de l'empreinte est insuffisant pour caractériser la résistance à l'usure d'une huile. Le critère pour l'adhésion a du être redéfini. La répétabilité et la reproductibilité ont été améliorées. PY - 2001 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=13446760 SN - 0032-6895 SN - 1778-3771 VL - 89 IS - 9-10 SP - 3 EP - 9 CY - Paris AN - OPUS4-1178 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Review on Lubricious Oxides and Their Practical Importance PY - 2004 SN - 0-9247-4872-7 SP - 59 EP - 77 PB - Dekker CY - New York AN - OPUS4-3582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André A1 - Habig, Karl-Heinz T1 - Einfluß von Temperatur und Gleitgeschwindigkeit auf Festkörpergleitreibung und -verschleiß von Si3N4 bis 1000°C PY - 1989 SN - 0173-9913 SN - 0196-6219 VL - 66 IS - 10 SP - 426 EP - 432 PB - Göller CY - Baden-Baden AN - OPUS4-2402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Skopp, André A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Tribological behavior of silicon nitride materials under unlubricated sliding between 22°C and 1000°C KW - Silicon nitride KW - Wear maps KW - High temperature KW - Tribology KW - T-maps KW - Ceramics composites PY - 1995 SN - 0043-1648 VL - 181-183 SP - 571 EP - 580 PB - Elsevier CY - Amsterdam AN - OPUS4-2417 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Skopp, André A1 - Woydt, Mathias T1 - Ceramic and ceramic composite materials with improved friction and wear properties PY - 1995 SN - 1040-2004 SN - 1547-397X VL - 38 IS - 2 SP - 233 EP - 242 PB - Taylor & Francis CY - Philadelphia, Pa. AN - OPUS4-2418 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witke, Klaus A1 - Skopp, André A1 - Woydt, Mathias ED - Michel, B. T1 - Raman spectroscopic investigations in tribologically stressed contacts of (Ti,Mo)(C,N) ceramics T2 - 2nd International Conference and Exhibition Micro Materials CY - Berlin, Germany DA - 1997-04-16 PY - 1997 SN - 3-932434-05-6 VL - 1 SP - 1094 EP - 1096 PB - ddp Goldenbogen CY - Dresden AN - OPUS4-2421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André ED - Zambelli, G. ED - Vincent, L. T1 - Céramiques et Composites à Matrice Céramique PY - 1998 SN - 2-88074-338-9 N1 - Sprachen: Englisch/Französisch - Languages: English/French SP - 187 EP - 196 PB - Presses polytechniques et universitaires romandes CY - Lausanne AN - OPUS4-2422 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Skopp, André A1 - Woydt, Mathias A1 - Habig, Karl-Heinz T1 - Unlubricated sliding friction and wear of various Si3N4 pairs between 22°C and 1000°C PY - 1990 SN - 0301-679X VL - 23 IS - 3 SP - 189 EP - 199 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-2403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habig, Karl-Heinz A1 - Woydt, Mathias A1 - Skopp, André T1 - Dry friction and wear of self-mated sliding couples of SiC-TiC and Si3N4-TiN PY - 1991 SN - 0043-1648 VL - 148 SP - 377 EP - 394 PB - Elsevier CY - Amsterdam AN - OPUS4-2404 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Skopp, André A1 - Woydt, Mathias T1 - Charakterisierung des tribologischen Verhaltens von keramischen Gleitpaarungen mit moderner Oberflächenanalytik PY - 1991 SN - 0933-5137 SN - 1521-4052 VL - 22 IS - 8 SP - 289 EP - 300 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André ED - Bartz, Wilfried J. T1 - Keramik-Keramik-Verbundwerkstoffe mit verbesserten Reibungs- und Verschleißeigenschaften T2 - 8. Internationales Kolloquium. Technische Akademie Esslingen ; 8th International Colloquium. Technische Akademie Esslingen CY - Esslingen, Deutschland DA - 1992-01-14 PY - 1992 SN - 3-924813-28-0 N1 - Serientitel: Internationales Kolloquium / Technische Akademie Esslingen – Series title: Internationales Kolloquium / Technische Akademie Esslingen VL - 2 IS - 8 SP - 15.1-1-15.1-16 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-2407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André A1 - Wäsche, Rolf T1 - Ceramic-ceramic composite materials with improved friction and wear properties PY - 1992 SN - 0301-679X VL - 25 IS - 12 SP - 61 EP - 70 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-2408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias A1 - Skopp, André A1 - Wäsche, Rolf ED - Carlsson, R. T1 - Ceramic-ceramic composite materials with improved friction and wear properties T2 - 4th International Symposium Ceramic Materials and Components for Engines CY - Göteborg, Sweden DA - 1991-01-01 PY - 1992 SN - 1-85166-776-8 SP - 1219 EP - 1239 PB - Elsevier CY - London AN - OPUS4-2409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André A1 - Hantsche, Harald T1 - Ceramic wear track characterization by advanced X-ray diffraction PY - 1992 SN - 0913-543X VL - 9 IS - 2 SP - 9 EP - 16 PB - Rigaku-Denki-Kabushiki-Kaisha CY - T¯oky¯o AN - OPUS4-2410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Woydt, Mathias A1 - Skopp, André T1 - Keramik-Keramik-Verbundwerkstoffe PY - 1993 SN - 0724-3472 VL - 40 IS - 1 SP - 23 EP - 29 PB - Expert Verlag CY - Renningen AN - OPUS4-2411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Skopp, André A1 - Woydt, Mathias A1 - Habig, Karl-Heinz A1 - Brückner, R. A1 - Klug, T. T1 - Friction and wear behaviour of C- and SiC-fibre-reinforced glass composites against ceramic materials PY - 1993 SN - 0043-1648 VL - 169 SP - 243 EP - 250 PB - Elsevier CY - Amsterdam AN - OPUS4-2412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -