TY - CONF A1 - Wosniok, Aleksander T1 - Multifunktionale Geokunststoffe - nachhaltige Zustandsüberwachung durch ortsaufgelöste faseroptische Sensoren N2 - Vorstellung von Entwicklungsarbeiten zum Thema sensorbasierte Geokunststoffe mit integrierten faseroptischen Sensoren. T2 - 14. Bautextilien-Symposium BAUTEX 2020 CY - Chemnitz, Germany DA - 29.01.2020 KW - Intelligente Geokunststoffe KW - Sensorbasierte Geokunststoffe KW - Faseroptischer Sensor KW - Ortsverteilter Sensor PY - 2020 AN - OPUS4-50321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Karabay, G. ED - Kara, S. T1 - Smart geosynthetics for structural health monitoring using fully distributed fiber optic sensors N2 - We report on the development of a complete system for structural health monitaring of large-scale geotechnical structures. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along glass optical fibers (GOFs) by determining the so-called Brillouin frequency shift (BFS). ln a number of research activities we managed to optimize the BOFDA measurement setup regarding the spatial resolution and the accuracy of the measured quantities. Moreover, we realized a simultaneaus measurement of strain and temperature by using nonzero dispersion-shifted fibers (NZDSFs) with several multiple Brillouin scattering resonances. ln cooperation with our German and ltalian industry partners we finally succeeded in fabricating low-attenuation smart geosynthetics as a sensor component of a fully distributed Brillouin-based fiber optic monitaring system. T2 - 6th International Technical Textiles Congress CY - Izmir, Turkey DA - 14.10.2015 KW - Brillouin scattering KW - Distributed sensor KW - Fiberoptic sensor KW - Optical fiber KW - Structural health monitoring PY - 2015 SN - 978-975-441-448-6 SP - 215 EP - 218 PB - Meta Basim Pr. AN - OPUS4-34772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Smart Geosynthetics for Structural Health Monitoring Using Fully Distributed Fiber Optic Sensors T2 - 6th International Technical Textiles Congress CY - Izmir, Turkey DA - 2015-10-14 PY - 2015 AN - OPUS4-34825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Petrov, Sergej A1 - Neumann, Patrick P. A1 - Werner, Klaus-Dieter A1 - Wosniok, Aleksander A1 - Lazik, D. A1 - Bartholmai, Matthias ED - Nicoletto, G. ED - Pastrama, S.D. ED - Emri, I. T1 - Concept for investigating mechanical and thermal impacts on distributed subsurface gas monitoring N2 - A multifunctional sensor in line shape was developed and introduced in previous work for measuring of gas concentrations, temperature change, and strain. A current field study focuses on a spatially distributed monitoring of subsurface CO 2 gas storage sites in near real time. Mechanical impacts, e.g., caused by construction work, denudation, and seismic activity, can affect the integrity of underground gas storage sites. Thermal or moisture impacts, e.g., caused by weather conditions, can influence the gas Distribution behavior. In this paper, we briefly describe the setup of a CO 2 injection soil test field. This setup contains actuating elements for the investigation of mechanical and thermal impacts on distributed subsurface gas monitoring. A concept is given for evaluating these impacts and first experimental results are presented. T2 - 32nd DANUBIA ADRIA SYMPOSIUM on Advances in Experimental Mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2015 KW - Linear sensor KW - Distributed sensor KW - Monitoring of CO 2 KW - Subsurface monitoring KW - Gas storage areas KW - Membrane-based gas sensing KW - Fibre optical sensing PY - 2016 DO - https://doi.org/10.1016/j.matpr.2016.03.060 SN - 2214-7853 VL - 3 IS - 4 SP - 1124 EP - 1128 PB - Elsevier Ltd. AN - OPUS4-35688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Jansen, R. A1 - Cheng, L. A1 - Chruscicki, Sebastian T1 - Ortsaufgelöste Zustandsüberwachung von Brückenbauwerken mittels faseroptischer Sensoren N2 - In der vorliegenden Studie wurde der Einfluss der statischen Verkehrsbelastung auf die geringen Durchbiegungseffekte in der Betonkonstruktion einer bestehenden Brücke mittels ortsauflösender faseroptischer Sensoren untersucht. Dabei tragen die Ergebnisse der an der Amsterdamer Brücke 705 durchgeführten Belastungstests wesentlich zum Verständnis des Strukturverhaltens bei. Das Konzept der statischen Belastung basierte auf dem Einsatz von zwei 36-Tonnen-Lastwagen, die an mehreren vorbestimmten Stellen auf der Brücke anhielten. Die auf diese Weise aufgebrachte Last führte zu ortsabhängigen kleinen Durchbiegungseffekten, die als lokale Längsdehnung der an der Unterseite der Brücke integrierten Sensorfaser aufgezeichnet wurden. Die reflektometrischen Messungen beruhten auf dem Prinzip genannt TW-COTDR (Tunable Wavelength Coherent Optical Time Domain Reflectometry). Die Messgenauigkeit lag im Bereich von 0,5 µm/m. T2 - DGZfP-Jahrestagung 2021 CY - Online meeting DA - 10.05.2021 KW - Frequenzbereichsreflektometrie KW - Ortsaufgelöste Fasersensorik KW - Rayleigh-Streuung PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-526752 UR - https://jahrestagung.dgzfp.de/Programm#P73 SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-52675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Faseroptische Strahlungssensoren für kerntechnische Anwendungen N2 - Faseroptische Strahlungssensoren ermöglichen ein räumlich verteiltes Online-Monitoring entlang der gesamten Sensorfaser. Verschiedene Messverfahren nutzen überwiegend zwei durch die ionisierende Strahlung in optischen Fasern induzierte Effekte, d. h. die Erhöhung der optischen Dämpfung und die damit verbundene Veränderung des Brechungsindex des Fasermaterials. Die Sensitivität der Strahlungssensoren lässt sich je nach Anwendung durch die Wahl der Dotierstoffe im Glasfaserkern sowie der Art des Polymermaterials des POF-Sensors beeinflussen. Ferner ist die Sensitivität auch durch den Betrieb bei geeigneten Wellenlängen einstellbar. Bei dem sensorischen Einsatz von faseroptischen Sensoren muss auch die vorhandene Ausheilung des Sensors sowie die Abhängigkeit der erfassten Messsignale von der Temperatur und der Dosisleistung berücksichtigt werden. T2 - 2. Tage der Standortauswahl CY - Online meeting DA - 11.02.2021 KW - Faseroptischer Strahlungssensor KW - Ortsauflösende Fasersensorik KW - Strahlungsinduzierte optische Dämpfung PY - 2021 AN - OPUS4-52112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Faseroptische Strahlungssensoren für kerntechnische Anwendungen N2 - Faseroptische Strahlungssensoren ermöglichen ein räumlich verteiltes Online-Monitoring entlang der gesamten Sensorfaser. Verschiedene Messverfahren nutzen überwiegend zwei durch die ionisierende Strahlung in optischen Fasern induzierte Effekte, d. h. die Erhöhung der optischen Dämpfung und die damit verbundene Veränderung des Brechungsindex des Fasermaterials. Die Sensitivität der Strahlungssensoren lässt sich je nach Anwendung durch die Wahl der Dotierstoffe im Glasfaserkern sowie der Art des Polymermaterials des POF-Sensors beeinflussen. Ferner ist die Sensitivität auch durch den Betrieb bei geeigneten Wellenlängen einstellbar. Bei dem sensorischen Einsatz von faseroptischen Sensoren muss auch die vorhandene Ausheilung des Sensors sowie die Abhängigkeit der erfassten Messsignale von der Temperatur und der Dosisleistung berücksichtigt werden. T2 - 2. Tage der Standortauswahl CY - Online meeting DA - 11.02.2021 KW - Faseroptischer Strahlungssensor KW - Ortsauflösende Fasersensorik KW - Strahlungsinduzierte optische Dämpfung PY - 2021 AN - OPUS4-52113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Ortsaufgelöste Zustandsüberwachung von Brückenbauwerken mittels faseroptischer Sensoren N2 - In der vorliegenden Studie wurde der Einfluss der statischen Verkehrsbelastung auf die geringen Durchbiegungseffekte in der Betonkonstruktion einer bestehenden Brücke mittels ortsauflösender faseroptischer Sensoren untersucht. Dabei tragen die Ergebnisse der an der Amsterdamer Brücke 705 durchgeführten Belastungstests wesentlich zum Verständnis des Strukturverhaltens bei. Das Konzept der statischen Belastung basierte auf dem Einsatz von zwei 36-Tonnen-Lastwagen, die an mehreren vorbestimmten Stellen auf der Brücke anhielten. Die auf diese Weise aufgebrachte Last führte zu ortsabhängigen kleinen Durchbiegungseffekten, die als lokale Längsdehnung der an der Unterseite der Brücke integrierten Sensorfaser aufgezeichnet wurden. Die reflektometrischen Messungen beruhten auf dem Prinzip genannt TW-COTDR (Tunable Wavelength Coherent Optical Time Domain Reflectometry). Die Messgenauigkeit lag im Bereich von 0,5 µm/m. T2 - DGZfP-Jahrestagung 2021 CY - Online meeting DA - 10.05.2021 KW - Ortsaufgelöste Fasersensorik KW - Frequenzbereichsreflektometrie KW - Rayleigh-Streuung PY - 2021 UR - https://jahrestagung.dgzfp.de/Programm#P73 AN - OPUS4-52632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Faseroptische Strahlungssensoren für kerntechnische Anwendungen N2 - Der Anstieg der Vielfalt nuklearer Anwendungen weit über die Bereiche der kerntechnischen Stromerzeugung erhöht die Relevanz der Entwicklung und Anwendung neuer Technologien zur Strahlungsüberwachung. Auch die offenen Sicherheitsfragen bei der Entsorgung radioaktiver Abfälle einschließlich Zwischen- und Endlagerungsproblematik verstärkt die Nachfrage nach effizienten Monitoringsystemen zum Schutz von Mensch und Umwelt vor ionisierender Strahlung. Aufgrund ihrer messtechnisch vorteilhaften Materialeigenschaften stellen die faseroptischen Strahlungssensoren eine vielversprechende Alternative zu traditionellen Dosimetern dar. Bedingt durch ihre kleinen Abmessungen, elektromagnetische Unempfindlichkeit und ihr geringes Gewicht können faseroptische Sensoren in einer harschen Umgebung an schwer zugänglichen Stellen eingesetzt werden. Darüber hinaus bietet diese Art der Sensoren die Möglichkeit der ortsverteilten Messung entlang der gesamten Sensorfaser. Somit kann durch eine einzelne optische Faser eine Vielzahl an punktuell messenden Sensoren ersetzt werden. Dieser Beitrag beschreibt die in der BAM vorangetriebenen Entwicklungen unterschiedlicher Sensorprinzipien, -lösungen und -verfahren zur Detektion ionisierender Strahlung. T2 - 2. Tage der Standortauswahl CY - Online meeting DA - 11.02.2021 KW - Faseroptischer Strahlungssensor KW - Ortsauflösende Fasersensorik KW - Strahlungsinduzierte optische Dämpfung KW - Gammastrahlung KW - Rayleigh-Streuung KW - Brillouin-Streuung PY - 2021 SP - 43 AN - OPUS4-52211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Optical fibers for sensing applications: Towards ionizing radiation monitoring N2 - Overview about existing fiber optic sensing techniques including ionizing radiation monitoring. T2 - WP7 Meeting EU project PREDIS CY - Online meeting DA - 05.02.2021 KW - Fiber optic sensor KW - Radiation-induced attenuation KW - Radiation sensing fibers KW - Distributed sensing PY - 2021 AN - OPUS4-52090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed fiber optic radiation sensors N2 - In this work, we present our results achieved in several research activities for development of distributed fiber optic radiation sensors using glass and polymer optical fibers. The findings show that both the measurement of the radiation-induced attenuation (RIA) along the entire sensing fiber and the accompanying change in the refractive index of the fiber core can be used for distributed radiation monitoring. T2 - safeND CY - Online meeting DA - 10.11.2021 KW - Distributed fiber optic radiation sensors KW - Radiation-induced attenuation KW - Optical fiber sensor KW - Incoherent optical frequency domain reflectometry PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537531 DO - https://doi.org/10.5194/sand-1-15-2021 VL - 1 SP - 15 EP - 16 AN - OPUS4-53753 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Fibre optic sensors for monitoring tasks in a radiation environment N2 - The topic of the presentation are distributed fiber optic measurement techniques that can be used for long-term monitoring of strain, temperature and radiation distribution in the radiation environment. The fiber optic sensors applied to the surface of waste packages provide detection and localization of cracks. T2 - Workshop WP7.3 EU project PREDIS CY - Online meeting DA - 15.11.2021 KW - Distributed sensing KW - Fiber optic sensor KW - Radiation sensing fibers KW - Brillouin distributed fiber sensor KW - Distributed acoustic sensing PY - 2021 AN - OPUS4-53751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed fiber optic radiation sensors N2 - In this work, we present our results achieved in several research activities for development of fiber optic dosimeters. The findings show that both the measurement of the radiation-induced attenuation (RIA) along the entire sensing fiber and the accom panying change in the refractive index of the fiber core can be used for distributed radiation monitoring in the kGy and MGy range, respectively. Depending on the fiber type and material the RIA shows varying response to dose rates, environmental temperatures and the wavelength of the laser source used. T2 - safeND CY - Online meeting DA - 10.11.2021 KW - Distributed sensing KW - Fiber optic radiation sensor KW - Radiation sensing fibers KW - Radiation-induced attenuation PY - 2021 AN - OPUS4-53752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Königsbauer, Korbinian A1 - Wosniok, Aleksander A1 - Nöther, N. A1 - Schaller, B. T1 - Entwicklung eines praxistauglichen POF-basierten Messsystems mittels digitaler I-OFDR zur Dehnungsdetektion T1 - Development of a practicable POF-based measuring system using digital I-OFDR for strain detection N2 - Es wird ein faseroptisches Messsystem vorgestellt, welches auf Basis der Rayleigh-Rückstreumessung eine ortsauflösende Detektion von signifikant großen Dehnungen bei Bauvorhaben im von Anwendern geforderten Größenordnungsbereich von 3 % bis 10 % ermöglicht. Mit dem Verfahren der digitalen inkohärenten optischen Frequenzbereichsreflektometrie (I-OFDR) werden materialspezifische Vorteile robuster perfluorierter polymeroptischer Fasern (PF-POF) erschlossen. Für den angestrebten industriellen Einsatz für die Zustandsüberwachung im Bereich des Tunnel- und Spezialtiefbaus soll die spezifische Rückstreuzunahme in der PF-POF hochauflösend gemessen werden. Diese Veröffentlichung zeigt in ersten Projektergebnissen die Eignung des digitalen I-OFDR für eine Dehnungsdetektion von bis zu 10%. N2 - A fiber-optic measurement system is presented which, based on Rayleigh backscatter measurement, enables distributed detection of significantly large strains in construction projects in the range of 3 % to 10 % required by end users. The method of digital incoherent optical frequency domain reflectometry (I-OFDR) is used exploiting material-specific advantages of robust perfluorinated polymer optical fibers (PF-POF). For the intended industrial application for structural health monitoring in the field of tunnel construction and specialised civil and underground engineering, the specific backscatter increase in the PF-POF is to be measured with high resolution. This publication shows in first project results the suitability of the digital I-OFDR for strain detection up to 10%. T2 - 21. ITG/GMA-Fachtagung CY - Nuremberg, Germany DA - 10.05.2022 KW - Backscatter measurement KW - Optical fiber sensors KW - POF KW - I-OFDR KW - Strain measurement PY - 2022 SN - 978-3-8007-5835-7 SN - 0932-6022 VL - 303 SP - 139 EP - 143 PB - VDE VERLAG GMBH CY - Berlin · Offenbach AN - OPUS4-54851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Königsbauer, Korbinian A1 - Wosniok, Aleksander A1 - Nöther, N. A1 - Schaller, M. B. T1 - POF-based digital I-OFDR for strain detection in road construction N2 - We report on the development of a field-proven distributed fiber optic sensing system for structural health monitoring in road construction and civil engineering. The system is based on a cost-efficient digital incoherent optical frequency domain reflectometry (I-OFDR) for distributed strain detection along a polymer optical fiber. In this method, the strain-induced backscatter increase in a graded-index multimode perfluorinated polymer optical fiber (PF-POF) is determined by measuring the complex transfer function of the sensing fiber using a compact digital data acquisition unit. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Digital I-OFDR KW - Perfluorinated polymer optical fiber KW - Smart geosynthetics KW - Structural health monitoring KW - Road construction KW - Civil engineering PY - 2023 DO - https://doi.org/10.1117/12.2678436 SP - 1264326-1 PB - SPIE AN - OPUS4-57592 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Achievements and challenges of distributed polymer optical fiber sensors @BAM N2 - Monitoring of construction projects plays increasingly important role in the implementation of growing needs and requirements, especially in geologically difficult areas. This particularly concerns tunnelling and special civil engineering projects. The use of fiber optic sensors for structural health monitoring provides significant economic advantages regarding lower life-cycle costs of the civil infrastructure. We present our achievements in the development of distributed polymer optical fiber sensors based on Rayleigh and Brillouin scattering for early damage detection. T2 - POF Conference CY - Bilbao, Spain DA - 26.09.2022 KW - Distributed POF sensor KW - OTDR KW - OFDR KW - Smart geosynthetics PY - 2022 AN - OPUS4-56031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Königsbauer, Korbinian A1 - Nöther, N. A1 - Schaller, M. B. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed POF sensors for structural health monitoring in civil construction applications N2 - In this paper, a cost-efficient distributed fiber optic measurement system based on Rayleigh scattering is presented. The distributed digital incoherent optical frequency domain reflectometry (I-OFDR) method is developed for detection of significantly large strain in the range from 3 % up to 10 % as required by end users. For this purpose, a vector network analyzer used in the I-OFDR is replaced by a compact and cost-effective digital data acquisition system. This digital emitting/receiving unit enables the recording of the complex transfer function carrying information about the local deformations along the entire sensing fiber. T2 - POF 2022 The 30th International Conference on Plastic Optical Fibers CY - Bilbao, Spain DA - 26.09.2022 KW - I-OFDR KW - PF-POF KW - Structural health monitoring KW - Rayleigh backscatter measurement KW - Strain detection PY - 2022 VL - 2022 SP - 152 EP - 155 AN - OPUS4-56060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Verteilte POF-basierte faseroptische Sensoren zur Infrastrukturüberwachung in der Geotechnik N2 - Wir präsentieren unsere Forschungsergebnisse zur Entwicklung eines faseroptischen Sensorsystems mit polymeroptischen Fasern integriert in Geokunststoffe für die Überwachung von geotechnischen Anlagen. Das Sensorsystem dient der räumlichen Auflösung lokaler Dehnungsereignisse im für Anwender signifikanten Größenordnungsbereich von 3 % bis 10 %. Das gesamte Sensorkonzept besteht aus einem praxistauglichen Messsystem basierend auf der digitalen inkohärenten optischen Frequenzbereichsreflektometrie (I-OFDR) und einer Sensormatte in Form eines Geotextils mit integrierten faseroptischen perfluorierten polymeroptischen Fasern (PF-POFs). T2 - DGZfP Fachtagung Bauwerksdiagnose 2024 CY - Berlin, Germany DA - 29.02.2024 KW - Ortsverteilte faseroptische Sensorik KW - Optische Frequenzbereichsreflektometrie KW - Bauwerksüberwachung KW - Sensorbasierte Geokunststoffe PY - 2024 AN - OPUS4-59633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - POF-based monitoring system using digital I-OFDR for strain detection in road construction N2 - We present a prototype of a distributed POF sensing system for strain detection in road construction and civil engineering ready to be used in practical applications. The system is based on a cost-efficient digital incoherent optical frequency domain reflectometry (I-OFDR). In this approach, the strain-induced changes in the Rayleigh backscattering profile along a perfluorinated polymer optical fiber (PF-POF) are determined by measuring the complex transfer function of the sensing fiber using a compact digital data acquisition unit. The digital unit replaces an oversized vector network analyzer (VNA) enabling suitability of the measurement system for out-door use and providing a significant reduction of the total system costs at the same time. The entire sensor con-cept includes the use of geosynthetics with integrated PF-POFs as two-dimensional sensor structures for geotech-nical applications. The robustness and the functionality of the distributed POF I-OFDR sensors were proven in the field. The field test involved embedding of two geomats, each with two polymer optical sensor loops, into the embankment of the federal road B 91 in a section near Leipzig. The measurements conducted after the sensor-based geomats had been installed confirmed both the potential of such smart geosynthetics and the functionali-ty of the digital I-OFDR prototype. T2 - POF2023 CY - Cork, Irland DA - 17.09.2023 KW - Digital I-OFDR KW - Distriubuted polymer optical fiber sensor KW - Smart geosynthetics KW - Strain detection KW - Structural health monitoring PY - 2023 AN - OPUS4-58423 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed polymer optical fiber sensors using digital I-OFDR for geotechnical infrastructure health monitoring N2 - We present a distributed polymer optical fiber sensor system for deformation monitoring of geotechnical infrastructure. The sensor system is based on the digital incoherent optical frequency domain reflectometry (I-OFDR) for the detection of local strain events along a perfluorinated polymer optical fiber (PF-POF) used as a sensing fiber. For the best possible load transfer, the PF-POFs were integrated onto geosynthetics which pose a sensor carrier for the sensing fiber. By using elastic PF-POF instead of a standard glass fiber as a sensing fiber the strain range of geosynthetics-integrated fiber optic sensors could be extended up to 10 % in accordance with the end-user requirements. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Digital I-OFDR KW - Distributed polymer optical fiber sensor KW - Distributed strain sensing KW - Smart geosynthetics KW - Structural health monitoring PY - 2024 AN - OPUS4-60308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Königsbauer, Korbinian A1 - Nöther, Nils A1 - Färber, Jan A1 - Schaller, M.-Barbara A1 - Krebber, Katerina T1 - Distributed polymer optical fiber sensors using digital I-OFDR for geotechnical infrastructure health monitoring N2 - We present a distributed polymer optical fiber sensor system for deformation monitoring of geotechnical infrastructure. The sensor system is based on the digital incoherent optical frequency domain reflectometry (I-OFDR) for the detection of local strain events along a perfluorinated polymer optical fiber (PF-POF) used as a sensing fiber. For the best possible load transfer, the PF-POFs were integrated onto geosynthetics which pose a sensor carrier for the sensing fiber. By using elastic PF-POF instead of a standard glass fiber as a sensing fiber the strain range of geosynthetics-integrated fiber optic sensors could be extended up to 10 % in accordance with the end-user requirements. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Digital I-OFDR KW - Distributed polymer optical fiber sensor KW - Ddistributed strain sensing KW - Smart geosynthetics KW - Structural health monitoring PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-603096 SP - 1 EP - 7 PB - NDT.net AN - OPUS4-60309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasinathan, M. A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Babu Rao, C. T1 - Optical fiber defect detection using Brillouin optical time domain analyser N2 - A new technique for optical fiber defect detection using Brillouin distributed fiber optic sensor (DFOS) has been proposed and experimentally demonstrated in this paper. This technique is based on stimulated Brillouin scattering (SBS), which offers three wave interaction in single mode optical fiber (SMF -10 μm/125 μm acrylic coated fiber). The nonlinear effect of SBS is manipulated to locate the defect in optical fiber using distributed sensing technology. Various kind of defects may be present in optical fibers. This paper details a case study on observation of a defect, which manifests its presence in certain temperature values. The detail of defect detection through distributed fiber sensor using the SBS has been brought out. SBS is sensitive to temperature and strain. In order to study the effect of defect in distributed fiber sensor as function of temperature and strain, the distributed pre-strained and unstrained optical fiber is subjected to temperature variation and corresponding measurements are obtained with Brillouin optical time domain analyser (BOTDA). This technique enables the utilization of Brillouin parameters, such as decreased amplitude, frequency and increased linewidth in the defect region of the fiber length. The fiber defect location can be determined with spatial resolution accuracy of less than 50 cm of using BOTDA technique. KW - Stimulated Brillouin scattering KW - Distributed sensor KW - Optical fiber KW - Brillouin Optical Time Domain Analysis PY - 2016 SN - 0019-5596 VL - 54 IS - 9 SP - 565 EP - 570 PB - NISCAIR AN - OPUS4-37914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasinathan, M. A1 - Babu Rao, C. A1 - Murali, N. A1 - Jayakumar, T. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Bond monitoring in temperature dependent applications using Brillouin optical time domain analyser N2 - Adhesive bond has to be evaluated for its integrity over a range of temperature. Adhesive is being used to bond the sensors with structures. There is no validated technique to test its performance. In this paper, we propose a Brillouin Optical Time Domain Analyzer (BOTDA) based methodology to detect temperature-induced adhesive bond failure below room temperature using distributed fiber optic sensor. The differential coefficient of thermal expansion of the structure and fiber sensor can lead to bond failure at low temperature. Optical fiber impregnated in the structure will experience differential temperature/strain due to debond of the adhesive. This leads to the frequency and amplitude decomposition of the Brillouin spectra. This is a good indication for real-time monitoring of the integrity of a bond. KW - Adhesive bond KW - Brillouin scattering KW - optical fiber sensor KW - Brillouin optical time domain analysis KW - distributed sensor PY - 2016 DO - https://doi.org/10.1007/s12596-015-0266-5 VL - 45 IS - 1 SP - 44 EP - 49 PB - Springer AN - OPUS4-37923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Ortsverteilte faseroptische Messtechnik N2 - Vorstellung und Anwendung ortsverteilter Messverfahren für faseroptische Zustandsüberwachung von Bauwerken T2 - Angewandte Forschung im Bauwesen — Anwenderkonferenz CY - Berlin,Germany DA - 22.09.2017 KW - Fasersensorik KW - Ortsverteilte Messtechnik KW - Ortsaufgelöste Messung PY - 2017 AN - OPUS4-42141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schreier, Andy A1 - Wosniok, Aleksander A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Humidity-induced Brillouin frequency shift in perfluorinated polymer optical fibers N2 - We report, to our knowledge, for the first time on humidity-induced Brillouin frequency shifts in perfluorinated graded index polymer optical fibers. A linear relation between Brillouin frequency shift and humidity was observed. Furthermore, the humidity coefficient of the Brillouin frequency shift is demonstrated to be a function of temperature (-107 to -64 kHz/%r.h. or -426 to -49 kHz m3/g in the range of 20 to 60 °C). An analytical description proves temperature and humidity as two mutually independent effects on the Brillouin frequency shift. KW - Brillouin KW - Polymer optical fibre KW - Humidity PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-457165 DO - https://doi.org/10.1364/OE.26.022307 SN - 1094-4087 VL - 26 IS - 17 SP - 22307 EP - 22314 PB - Optical Society of America AN - OPUS4-45716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Wosniok, Aleksander ED - Peng, G.D. T1 - Distributed Brillouin Sensing: Frequency-Domain Techniques N2 - The substantial progresses in fiber-optic communications in combination with the increasing economic and political interest in structural health monitoring have led to a commercial establishment of distributed Brillouin sensing. The sensor systems, mainly based on the time-domain techniques, have been successfully implemented in the areas such as pipeline leak detection, geohazard effects, and ground movement detection. This chapter introduces a further advancement in the area of Brillouin sensing in the frequency domain. The so-called Brillouin optical frequency-domain analysis (BOFDA) offers crucial perspectives in terms of dynamic range and cost efficiency. The main principle of the frequency-domain approach takes advantage of the reversibility between the time and frequency domain given by a Fourier transform in the analysis of linear systems. The hereby presented overview gives a summary of the benefits and challenges of frequency-domain measurements closely tied to the narrowband recording of the complex transfer function. This function relates the counterpropagating pump and probe laser light along the sensor fiber providing the pulse response of the measurement system by applying the inverse Fourier transform (IFT). The strain or temperature distribution can be then determined from the retrieved Brillouin frequency shift (BFS) profile along the fiber. KW - Distributed Brillouin Sensing KW - Brillouin optical frequency-domain analysis KW - BOFDA PY - 2018 SN - 978-981-10-1477-2 DO - https://doi.org/10.1007/978-981-10-1477-2_8-1 VL - 2018 SP - 1 EP - 25 PB - Springer Nature CY - Singapore AN - OPUS4-45044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Smart geosynthetics for structural health monitoring applications N2 - Responding to a growing need for intelligent monitoring of critical geotechnical and civil infrastructures, new multifunctional geotextiles and geogrids with integrated optical fibers were developed and investigated within several research projects. Such smart two-dimensional geosynthetics intercorporating optical fibers as distributed sensors provide solutions both for soil reinforcement, erosion control, drainage or environmental protection and for cost-effective monitoring of critical mechanical deformations and temperature distribution in geotechnical and masonry structures at the same time. The integrated fiber optic sensors provide online information about the condition of the monitored structure and about the occurrence and localization of any damage or degradation for the purpose of preventing a total collapse. T2 - The Fiber Society's Spring 2017 Conference CY - Institut für Textiltechnik der RWTH Aachen, Germany DA - 17.05.2017 KW - Smart geosynthetics KW - Sensor-based geotextiles KW - Fiber optic sensor KW - POF sensor KW - Distributed sensing PY - 2017 SP - 43 AN - OPUS4-42560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schreier, Andy A1 - Liehr, Sascha A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Investigation on the influence of humidity on stimulated Brillouin backscattering in perfluorinated polymer optical fibers N2 - In this paper perfluorinated graded-index polymer optical fibers are characterized with respect to the influence of relative humidity changes on spectral transmission absorption and Rayleigh backscattering. The hygroscopic and thermal expansion coefficient of the fiber are determined to be CHE = (7.4 +/- 0.1) 10^-6 %r.h.^-1 and CTE = (22.7 +/- 0.3) 10^-6 K^-1, respectively. The influence of humidity on the Brillouin backscattering power and linewidth are presented for the first time to our knowledge. The Brillouin backscattering power at a pump wavelength of 1319 nm is affected by temperature and humidity. The Brillouin linewidth is observed to be a function of temperature but not of humidity. The strain coefficient of the BFS is determined to be CS = (146.5 +/- 0.9) MHz/% for a wavelength of 1319 nm within a strain range from 0.1 % to 1.5 %. The obtained results demonstrate that the humidity-induced Brillouin frequency shift is predominantly caused by the swelling of the fiber over-cladding that leads to fiber straining. KW - Brillouin KW - Polymer optical fibre KW - Humidity PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-465932 DO - https://doi.org/10.3390/s18113952 SN - 1424-8220 VL - 18 IS - 11 SP - 3952, 1 EP - 12 PB - MDPI CY - Basel, Switzerland AN - OPUS4-46593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Auftakttreffen FOSsure „ Faseroptische Sensoren zur sicheren Zustandsbewertung von Massivbrücken“ N2 - Vorstellung der Vorarbeiten und Kernkompetenzen des Fachbereiches 8.6 hinsichtlich der Zustandsüberwachung von Brückenbauwerken im Rahmen eines Auftakttreffens im Forschungsprojekt FOSsure. T2 - Kick-off-Treffen FOSsure CY - Dresden, Germany DA - 16.04.2025 KW - DFOS KW - faseroptische Sensoren KW - Brückenmonitoring KW - Ortverteilte akustische Sensorik KW - COTDR PY - 2025 AN - OPUS4-62975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Glötzl, R. ED - Boller, C. T1 - Temperature-corrected determination of mechanical deformations in geotechnical structures using Brillouin-based fiber optic sensors N2 - Structural Health Monitoring based on distributed Brillouin measuring techniques has been playing bigger and bigger role for applications in large-scale critical structures over the last decade. The Brillouin sensing techniques make use of low-loss single-mode optical fibers as distributed sensors allowing compound strain and temperature profile discrimination along the measured section even over several tens of kilometers. Thereby, the measured Brillouin frequency shift (BFS) features much stronger dependence on the longitudinal strain in the sensor fiber than on the temperature distribution along the fiber optic sensor. By detection of slight structural changes in monitored civil structures, such as dams, pipelines and tunnels, the influence of temperature on the measured BFS cannot be neglected. In simple cases of fiber optic sensors embedded deeply enough into earth structures no significant temperature gradients caused by weather conditions such as sunrays could be observed. The temperature contributes here only to the signal offset and the local mechanical deformations arisen due to soil displacement can be read directly from the distribution of the BFS. Also special cable solutions for separate determination of temperature and strain have been tested by us under field conditions. The use of two separate optical fibers for strain and temperature detection limits the spatial resolution and measurement accuracy in the determination of both physical quantities. In search of the optimal sensory solution for monitoring of mechanical deformations taking into account the temperature component in the measured signal the use of so called nonzero dispersion-shifted fibers has been investigated in several laboratory tests. Due to different doping concentration in the core new resonance acoustic modes can propagate in such optical fibers which results in multipeak structure in the Brillouin gain spectrum (BGS). The appearance of more than one resonance peak in the BGS offers the possibility to realize simultaneous measurement of longitudinal strain and temperature by analysis of applicable BFSs as function of both physical quantities using only one low cost optical fiber. T2 - EWSHM'12 - 6th European workshop on structural health monitoring 2012 CY - Dresden, Germany DA - 03.07.2012 KW - Structural health monitoring KW - Brillouin scattering KW - Distributed sensor PY - 2012 SN - 978-3-940283-41-2 VL - 1 SP - 417 EP - 422 CY - Berlin AN - OPUS4-26311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander ED - Liao, Y. ED - Jin, W. ED - Sampson, D.D. ED - Yamauchi, R. ED - Chung, Y. ED - Nakamura, K. ED - Rao, Y. T1 - Brillouin gain spectrum characteristics for temperature compensation in fiber optic distributed strain sensor N2 - We studied Brillouin gain spectrum characteristics in single-mode optical fibers with different refractive index profiles to realize temperature-corrected distributed strain measurement. The measured Brillouin frequency shift (BFS) features much stronger dependence on the longitudinal strain in the sensor fiber than on the temperature distribution along the fiber optic sensor. By detection of slight structural changes in monitored civil structures, such as dams, pipelines and tunnels, the influence of temperature on the measured BFS cannot be neglected. T2 - OFS2012 - 22nd International conference on optical fiber sensors CY - Beijing, China DA - 15.10.2012 KW - Brillouin gain spectrum KW - BGS KW - Distributed Brillouin sensor KW - DBS KW - Fibre optic sensor KW - FOS KW - Brillouin optical frequency-domain analysis KW - BOFDA PY - 2012 DO - https://doi.org/10.1117/12.974841 SN - 0277-786X SN - 1996-756X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 8421 SP - 84219T-1 EP - 84219T-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-26978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Brillouin optical frequency-domain analysis for structural health monitoring N2 - We present our achievements in the development of distributed fiber optic sensing systems based on Brillouin optical frequency-domain analysis for structural health monitoring. The focus of the applications is on the gapless monitoring of geotechnical structures, large area infrastructures and electrical grids. The work includes the latest use of machine learning algorithms to reduce measurement time by coexistent increasing the measurement accuracy. T2 - 4th Workshop on Optomechanics and Brillouin Scattering CY - Erlangen, Germany DA - 14.06.2022 KW - Distributed sensing KW - BOFDA KW - Optical fiber sensor KW - Brillouin distributed fiber sensor PY - 2022 AN - OPUS4-55173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Wosniok, Aleksander A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Time-Efficient Convolutional Neural Network-Assisted Brillouin Optical Frequency Domain Analysis N2 - To our knowledge, this is the first report on a machine-learning-assisted Brillouin optical frequency domain analysis (BOFDA) for time-efficient temperature measurements. We propose a convolutional neural network (CNN)-based signal post-processing method that, compared to the conventional Lorentzian curve fitting approach, facilitates temperature extraction. Due to its robustness against noise, it can enhance the performance of the system. The CNN-assisted BOFDA is expected to shorten the measurement time by more than nine times and open the way for applications, where faster monitoring is essential. KW - Fiber-optic sensors KW - Machine learning KW - Temperature and strain monitoring KW - Brillouin distributed sensing PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524631 DO - https://doi.org/10.3390/s21082724 VL - 21 IS - 8 SP - 2724 PB - MDPI AN - OPUS4-52463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Hicke, Konstantin A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed humidity fiber-optic sensor based on BOFDA using a simple machine learning approach N2 - We report, to our knowledge for the first time, on distributed relative humidity sensing in silica polyimide-coated optical fibers using Brillouin optical frequency domain analysis (BOFDA). Linear regression, which is a simple and well-interpretable algorithm in machine learning and statistics, is utilized. The algorithm is trained using as features the Brillouin frequency shifts and linewidths of the fiber’s multipeak Brillouin spectrum. To assess and improve the effectiveness of the regression algorithm, we make use of machine learning concepts to estimate the model’s uncertainties and select the features that contribute most to the model’s performance. In addition to relative humidity, the model is also able to simultaneously provide distributed temperature information addressing the well-known cross-sensitivity effects. KW - Fiber optics sensors KW - Machine learning KW - Brillouin distributed sensing KW - Humidity sensing KW - Simultaneous temperature and humidity sensing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546294 DO - https://doi.org/10.1364/OE.453906 VL - 30 IS - 8 SP - 12484 EP - 12494 PB - OPTICA AN - OPUS4-54629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, N. A1 - Wang, S. A1 - Wosniok, Aleksander A1 - Glötzl, R. A1 - Schneider-Glötzl, J. ED - Xu, Y. L. ED - Zhu, S. ED - Xia, Y. ED - Ni, Y.Q. ED - Law, S.S. ED - Yin, J. H. ED - Su, Z.Q. T1 - Distributed Brillouin sensing in optical fibers: Soil displacement monitoring using sensor-equipped geogrids N2 - This paper reports on the application of distributed Brillouin fiber optic sensing to the monitoring of geotechnical structures. The presented approach to Brillouin sensing offers an alternative to the common pulse-based measurements by using the frequency domain analysis. The focus of the research and field-testing work is to collect reliable structural health monitoring data from large-scale structures while preserving the System’s versatility in terms of being suitable for different application environments (soil structures, foundations, concrete construction works, pipelines etc.) and its robustness in being well functioning in harsh environments. Upon reviewing the presented application test, it is concluded that Brillouin frequency domain based monitoring, when applied to geotechnical structures, is capable of providing accurate strain readings representing deformations of the soil body, and reliable temperature readings for generating temperature profiles of the entire structure. An overview of the frequency domain analysis of Brillouin sensing and its digital implementation is given, along with the experiences and insights drawn from an open field test of sensor-equipped geogrid mats. T2 - SHMII-6 - 6th International conference on structural health monitoring of intelligent infrastructure CY - Hong Kong, China DA - 09.12.2013 KW - Structural health monitoring KW - Distributed sensing KW - Fiber-optic sensing KW - Brillouin sensing KW - Strain and temperature measurements KW - Sensor-equipped geosynthetics PY - 2013 SN - 978-962-367-768-4 SP - 290 EP - 295 AN - OPUS4-29914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Aleksander, Wosniok A1 - Schreier, Andy T1 - Toward investigation of Brillouin scattering in multimode polymer and silica optical fibers N2 - In this paper, we present a study aimed at characterizing the optimal fiber optic components for Brillouin sensing in multimode fibers. For this purpose the use of single-mode and multimode circulators as well as couplers typically used in the Brillouin measurement setups was investigated. On the one hand the undesired coupling losses between conventional fiber optic measurement system components and a multimode sensor fiber can be overcome by replacing the singlemode components with their own multimode equivalents. On the other hand the use of multimode fiber optic circulators and multimode couplers affects the mode distribution of laser light which can impair the measurement signal backscattered in the multimode sensor fibers. In view of an increasing interest in high strain measurements using polymer optical fibers (POFs) as Brillouin-distributed sensors the investigation on Brillouin scattering effects in multimode fibers (MMFs) was performed on a low-loss perfluorinated graded-index polymer optical fiber (PFGI-POF). The obtained results were compared with those of a standard graded-index multimode (GI-MMF) silica glass optical fiber (GOF). This study confirms the relevance of the adaptation of the measurement system components to the use of the multimode sensor fibers. In addition, due to mode coupling effects occurring in the tested POF itself, the results show differences in the yield of the components adaptation in the sensory implementation of the two kinds of the tested optical fibers. T2 - SPIE’s 2017 International Symposium on Optics & Optoelectronics: Micro-structured and Specialty Optical Fibres CY - Prag, CZ DA - 26.04.2017 KW - Brillouin KW - Distributed sensing KW - Polymer optical fibre PY - 2017 SN - 978-1-5106-0965-5 SN - 978-1-5106-0966-2 DO - https://doi.org/10.1117/12.2267823 SN - 0277-786X VL - 10232 SP - 102320M-1 EP - 102320M-6 PB - SPIE AN - OPUS4-40471 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Smart geosynthetics for structural health monitoring applications N2 - Responding to a growing need for intelligent monitoring of critical geotechnical and civil infrastructures, new multifunctional geotextiles and geogrids with integrated optical fibers were developed and investigated within several research projects. Such smart two-dimensional geosynthetics intercorporating optical fibers as distributed sensors provide solutions both for soil reinforcement, erosion control, drainage or environmental protection and for cost-effective monitoring of critical mechanical deformations and temperature distribution in geotechnical and masonry structures at the same time. The integrated fiber optic sensors provide online information about the condition of the monitored structure and about the occurrence and localization of any damage or degradation for the purpose of preventing a total collapse. The optical fibers have a serious advantage over other kinds of sensors due to their fibrous nature, so they can be ideally processed like standard textile yarns. The monitoring of extended geotechnical structures like dikes, dams, railways, embankments or slopes requires sensor technologies with measurement lengths of at least some hundred meters which can be realized by the use of silica fibers. However, the integration of silica fibers into geosynthetics during the manufacturing process experienced problems of sensor brittleness, low strain range not exceeding 2 % and bending-related attenuation increase optimized to the value of 1.5 dB/km. Unlike silica fibers, the integration of polymer optical fibers (POFs) into various geosynthetics was easily achieved free of bending losses enabling distributed high strain measurements up to 40 % using PMMA POFs. The first industrial product GEDISE based on a geogrid with integrated PMMA POFs is on the market. Due to the five times lower attenuation of low-loss perfluorinated graded-index POFs (PFGI-POFs), compared to PMMA POFs, the measurement range can be extended to 500 m. The low-loss PFGI-POFs offer the possibility of implementation of Brillouin optical fiber frequency domain analysis (BOFDA) which will significantly improve the measurement accuracy and spatial resolution in comparison with existing POF-based distributed measurement methods like POF OTDR. The development of a distributed Brillouin system based on PFGI-POFs is in progress. T2 - The Fiber Society’s Spring 2017 Conference CY - Institut für Textiltechnik der RWTH Aachen, Germany DA - 17.05.2017 KW - Smart geosynthetics KW - Sensor-based geotextiles KW - Fiber optic sensor KW - Distributed sensing PY - 2017 AN - OPUS4-40319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Liehr, Sascha T1 - Health monitoring of geotechnical structures by distributed fiber optic sensors N2 - Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs). T2 - AMA Conferences 2017 Sensor 2017 CY - Nürnberg, Germany DA - 30.05.2017 KW - Fiber optic sensor KW - Distributed sensor KW - Smart geosynthetics KW - Brillouin sensor KW - OTDR PY - 2017 SN - 978-3-9816876-4-4 DO - https://doi.org/10.5162/sensor2017/B7.4 SP - 280 EP - 285 PB - AMA Service GmbH CY - Wunstorf AN - OPUS4-40514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Sporea, D. A1 - Neguţ, D. A1 - Krebber, Katerina T1 - Gamma radiation influence on silica optical fibers measured by optical backscatter reflectometry and Brillouin sensing technique N2 - We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, IRL DA - 31.05.2016 KW - Brillouin frequency shift KW - Lonizing radiation KW - Gamma radiation KW - Radiation dosimetry KW - Optical fiber sensor KW - Brillouin scattering KW - Distributed measurement KW - Backscatter reflectometry PY - 2016 SN - 978-1-5106-0219-9 DO - https://doi.org/10.1117/12.2236678 SN - 0277-786X VL - 9916 SP - Article Number: 99162J PB - Spie-Int Soc Optical Engineering CY - Bellingham, WA, USA AN - OPUS4-37083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Gamma radiation influence on silica optical fibers measured by optical backscatter reflectometry and Brillouin sensing technique N2 - We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, IRL DA - 31.05.2016 KW - Brillouin frequency shift KW - Ionizing radiation KW - Gamma radiation KW - Radiation dosimetry KW - Optical fiber sensor KW - Brillouin scattering KW - Distributed measurement KW - Backscatter reflectometry PY - 2016 AN - OPUS4-37088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed Brillouin fiber optic sensor system for long-term structural health T2 - XVI Technical Dam Control International Conference CY - Wierchomla Mala, Polanc DA - 2015-09-29 PY - 2015 AN - OPUS4-34494 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Liehr, Sascha A1 - Krebber, Katerina A1 - Steffen, Milan A1 - Wosniok, Aleksander T1 - Fördermaßnahme KMU-innovativ: Informations- und Kommunikationstechnologie (IKT), EMS-261-003 (Digital OFDR - Entwicklung der digitalen Frequenzbereichsanalyse zur verteilten Rückstreumessung in optischen Fasern-Teilvorhaben: Sensorverfahren und Systembetrachtung / Schlussbericht zum Teilvorhaben KW - Digital OFDR KW - Verteilte Rückstreumessung KW - Frequenzbereichsanalyse PY - 2015 IS - BAM Vh 8158 SP - 1 EP - 45 CY - Berlin AN - OPUS4-34170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed Brillouin fiber optic sensor system for long-term structural health monitoring N2 - We report on the development of a distributed fiber optical sensor system for structural health monitoring of largc-scale geotechnical and civil infrastructures. The system is based on Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along Standard silica optical fibers used as sensors. By additional incorporation of the fiber optic sensors in geosynthetics, two-dimensional sensors can be realized. Such smart geosynthetics can be used for reinforeerneut of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. T2 - 16th International conference 'Technical dam control' CY - Wierchomla Mala, Poland DA - 29.09.2015 KW - Distributed fiber optical sensor KW - Brillouin frequency domain analysis KW - Smart geosynthetics KW - Structural health monitoring PY - 2015 SN - 978-83-64979-09-5 SP - 271 EP - 278 AN - OPUS4-34728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Health monitoring of geotechnical structures by distributed fiber optic sensors N2 - Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs). T2 - AMA Conferences 2017 Sensor 2017 CY - Nürnberg, Germany DA - 30.05.2017 KW - Fiber optic sensor KW - Distributed sensor KW - Smart geosynthetics KW - Brillouin sensor KW - OTDR PY - 2017 AN - OPUS4-40523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreier, Andy A1 - Jeschke, T. A1 - Petermann, K. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Analytical model for mode-based insertion loss in ball-lensed coupling of graded-index silica and polymer fibres N2 - Analytical model for ball-lensed couplers to calculate the insertion loss for each optical mode. The basis for the calculation are commercial perfluorinated polymer optical (PFGI-POFs) and silica based fibres (SOFs). The modal power distribution for given misalignments are presented as well as the reflection-based losses at all optical interfaces. Additionally, the ball-lensed interconnection between PFGI-POF and SOF was theoretically demonstrated. T2 - POF 2017: 26th International Conference on Plastic Optical Fibres CY - Aveiro, Portugal DA - 13.09.2017 KW - Polymer optical fibre KW - Optical connector PY - 2017 VL - 2017 SP - 1 EP - 4 AN - OPUS4-41979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Protection of critical infrastructure using fiber optic sensors embedded in technical textiles N2 - Terrorists and criminals more and more attack and destroy important infrastructures like routes, railways, bridges, tunnels, dikes and dams, important buildings. Therefore, reliable on-line and long-term monitoring systems are required to protect such critical infrastructures. Fiber optic sensors are well-suited for that. They can be installed over many kilometers and are able to measure continuously distributed strain, pressure, temperature and further mechanical and physical quantities. The very tiny optical fibers can be integrated into structures and materials and can provide information about any significant changes or damages of the structures. These so-called smart materials and smart structures are able to monitor itself or its environment. Particularly smart technical textiles with embedded fiber optic sensors have become very attractive because of their high importance for the structural health monitoring of geotechnical and masonry infrastructures. Such textiles are usually used for reinforcement of the structures; the embedded fiber optic sensors provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, critical infrastructures can be preventively protected. The paper will introduce this innovative field and will present the results achieved within several German and European projects. T2 - Fiber optic sensors and applications VII CY - Orlando, FL, USA DA - 2010-04-07 KW - Distributed sensors KW - Brillouin sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - POF OTDR KW - Strain sensors KW - Technical textiles KW - Geotextiles KW - Fiber optic sensors PY - 2010 SN - 9780819481412 DO - https://doi.org/10.1117/12.851013 SN - 0277-786X VL - 7677 IS - 767707 SP - 1 EP - 14 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-21675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Peter A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. T1 - Distributed fibre optic sensors embedded in technical textiles for monitoring of geotechnical and masonry structures T2 - Monitoring technologies workshop - MoDeRn (Proceedings) CY - Troyes, France DA - 2010-06-07 PY - 2010 IS - OP.7 SP - 71 EP - 72 AN - OPUS4-23041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, Nils A1 - Wosniok, Aleksander T1 - Sensorbasierte Geotextilien zur Deichertüchtigung T2 - DWA-RIMAX-Praktikertreffen CY - Potsdam, Germany DA - 2008-06-27 PY - 2008 AN - OPUS4-17654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed Fibre Optic Sensor System for Temperature and Strain Monitoring Based on Brillouin Optical-Fibre Frequency-Domain Analysis T2 - Eurosensors XXIII 2009 CY - Lausanne, Switzerland DA - 2009-09-06 PY - 2009 AN - OPUS4-20188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Nöther, Nils A1 - Krebber, Katerina ED - Juergen Brugger, ED - Danick Briand, T1 - Distributed fibre optic sensor system for temperature and strain monitoring based on Brillouin optical-fibre frequency-domain analysis T2 - EUROSENSORS XXIII: sensors, actuators and micro/nanosystems CY - Lausanne, Switzerland DA - 2009-09-06 KW - BOFDA KW - Sideband technique KW - Fibre optic sensors KW - Distributed Brillouin sensors KW - Stimulated Brillouin scattering KW - Nonlinear optics PY - 2009 SN - 1876-6196 SP - 1 EP - 4(?) AN - OPUS4-20235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -