TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kürten, C. T1 - Vernetzung reaktiver Kunststoffe mit Ultraschall überwachen KW - Elastomer KW - Epoxidharz KW - Phenolharz KW - Vernetzung KW - Vulkanisation KW - Schallgeschwindgkeit KW - Prozesskontrolle PY - 2008 SN - 0939-2629 SN - 0176-6058 IS - 2 SP - 31 EP - 33 PB - Holzverl. CY - Kissing AN - OPUS4-17587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Kürten, C. T1 - Verarbeitung von Harnstoff-Formmassen - Begleitende Online-Prozesskontrolle N2 - Harnstoff-Formmassen gehören zu den duroplastischen Formmassen, die im Werkzeug chemisch vernetzen und so ihre herausragende Temperaturbeständigkeit erreichen. Im Wettbewerb mit Thermoplasten weisen Formmassen den Nachteil auf, dass die Vernetzungsreaktion eine kritische Zeit bedingt, damit die Glasübergangstemperatur soweit verschoben werden kann, dass die heißen Teile stabil und blasenfrei entformt werden können. Die Zykluszeiten sind bei Formmassen daher deutlich höher als bei Thermoplasten. Eine Möglichkeit, die Zykluszeit zu verringern, wäre die Erhöhung der Werkzeugtemperatur, da bekanntlich eine Erhöhung der Reaktionstemperatur um 10 K zu einer Verdoppelung der Reaktionsgeschwindigkeit führt. Allerdings wird dabei das Zeitfenster für die Entformung optimal gehärteter Teile deutlich kleiner, der Prozess anfälliger gegen Schwankungen im Prozess und in der Formmasse-Zusammensetzung. Mit einer Online-Kontrolle des Vernetzungszustands sollte es aber gelingen, den Prozess auch bei einer höheren Werkzeugtemperatur noch stabil zu beherrschen. In der vorliegenden Arbeit wird die Methode der dielektrischen Prozesskontrolle in der Fertigung von Spritzgieß-Formteilen erprobt und die Möglichkeiten einer Prozesssteuerung werden herausgearbeitet. KW - Harnstoffharz KW - Elektroinstallationsteile KW - Aushärtungsverlauf KW - Kochversuch PY - 2008 SN - 0176-1625 VL - 61 IS - 12 SP - 790 EP - 793 PB - Gupta CY - Ratingen AN - OPUS4-18734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Goering, Harald T1 - Untersuchungen zum Vernetzungsgrad von Duromeren mittels Methoden der thermischen Analyse T2 - 1. Wildauer Duromer-Tagung CY - Wildau, Germany DA - 2008-03-11 PY - 2008 AN - OPUS4-16721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Kürten, Ch. A1 - Hoster, B. A1 - Bohmeyer, W. A1 - Lange, K. T1 - Ultraschallmesstechnik zur Wareneingangskontrolle und zur Überwachung T2 - 5th Int. Thermoset Conference CY - Iserlohn, Germany DA - 2008-11-20 PY - 2008 AN - OPUS4-18468 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Simulation of cross-linking process of prepregs by dynamic mechanical analysis T2 - 11. Internationale Tagung "Arbeitsgemeinschaft verstärkte Kunststoffe AVK" CY - Essen, Germany DA - 2008-09-22 PY - 2008 AN - OPUS4-17946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Qualitätskontrolle von Duroplasten unter besonderer Berücksichtigung der Phenoplaste aus heutiger Sicht T2 - Baekeland-Tag 2008 CY - Erkner, Germany DA - 2008-02-22 PY - 2008 AN - OPUS4-16685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Döring, Joachim A1 - Mc Hugh, Jarlath T1 - Making cure visible: monitoring the crosslinking process using integrated ultrasound sensors N2 - A special ultrasonic measuring system was developed to monitor the cross-linking process, enabling interaction with the manufacturing process in order to optimise part quality and reduce cycle times. KW - Thermoset KW - Ultrasound sensors KW - Mould KW - Rtm KW - Gelation KW - Vitrification PY - 2008 SN - 1639-965X IS - 38 SP - 64 EP - 66 PB - JEC CY - Paris AN - OPUS4-18610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaunich, Matthias A1 - Stark, Wolfgang A1 - Hoster, B. T1 - In-situ vulcanization monitoring by ultrasonic wave propagation T2 - 8. Kautschuk-Herbst-Kolloquium CY - Hannover, Deutschland DA - 2008-11-26 KW - Vulcanization KW - Cure monitoring KW - Ultrasound PY - 2008 SP - 133 AN - OPUS4-18574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Jaunich, Matthias A1 - Goering, Harald T1 - Charakterisierung der Vernetzungsreaktion von Harnstoff-Formmasse mittels Hochdruck-DSC T2 - 1. Wildauer Duromer-Tagung CY - Wildau, Germany DA - 2008-03-11 PY - 2008 AN - OPUS4-16720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Characterizing the flow-cure behaviour of thermoset plastics using thermoanalytical and ultrasonic methods N2 - The prospects of modern thermoanalytical methods for characterisation of flow, curing and final mechanical behaviour of moulding compounds were demonstrated. Using urea resin moulding compounds from different manufacturers the possibilities of the various techniques could be shown. With comparatively low effort, fundamental information can be gained before production process had been started. On this basis it is possible to make appropriate material selection at an early point in the process chain. On the basis of thermoanalytical data an incoming goods inspection can be established. Also it is easy to control the compliance with the conditions of delivery. In some cases it could also be helpful to have stored analysis data especially when problems appear in manufacturing process or unexpected part damages occur With the ultrasound measuring system it is possible to transfer the findings from the analytical methods directly to the processes in the mould. The application of ultrasound provides Dynamic Mechanical Analysis in the mould. Beside quality assurance ultrasound can also be used for process optimisation, especially for reduction of cycle time. In an advanced form ultrasound information can be used as a basis for improved machine control based on material state. The ultrasound measuring system developed by ISK Iserlohn and BAM can be obtained from the ISK. T2 - 5. Internationale Duroplasttagung / International Thermoset Conference CY - Iserlohn, Germany DA - 2008-11-20 KW - Differential Scanning Calorimetry KW - Dynamic Mechanical Analysis KW - Ultrasound KW - Urea rsin KW - Moulding compound KW - Incoming goods inspection KW - Process optimization PY - 2008 IS - Duro08_GB_08 SP - 1 EP - 8 AN - OPUS4-18586 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -