TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Crosslinking Instead of Glassy Transition N2 - In processing fibre-reinforced composites, the curing reaction can be significantly retarded if the temperature and reaction time are not optimally set. In such situations, complete curing is sometimes impossible under practically relevant conditions. It is difficult for processors to recognize or detect incomplete curing. The equilibrium glass transition temperature plays an important role in complete curing in the production process. PY - 2000 SN - 0945-0084 VL - 90 IS - 4 SP - 33 EP - 35 PB - Hanser CY - München AN - OPUS4-822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Vernetzen statt Verglasen PY - 2000 UR - http://www.kunststoffe.de/ku/default.asp SN - 0023-5563 VL - 90 IS - 4 SP - 90 EP - 92 PB - Hanser CY - München AN - OPUS4-823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen T1 - Ultraschall on-line Prozesskontrolle bei der Vulkanisation KW - Prozesskontrolle KW - Vulkanisation KW - Ultraschall KW - Sensoren KW - Schubmodul KW - Verlustmodul PY - 2000 SN - 0948-3276 SN - 0022-9520 SP - 9 Seiten PB - Hüthig CY - Heidelberg AN - OPUS4-997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -