TY - CONF A1 - Habel, Wolfgang A1 - Wenzel, H. ED - Ilki, A. ED - Motavalli, M. ED - Inci, P. ED - Köhli, M. T1 - Importance of standardization to promote the use of SHM systems N2 - Measurement and data recording systems are important parts of a holistic Structural Health Monitoring (SHM) system. They are often based on modern measurement and data communication technologies for which standards (or at least guidelines) do not exist yet. A lack in standardization, however, makes the establishment of new sensing and application technologies - and thus up-to-date SHM systems - substantially difficult. Successful commercialization and wide acceptance of SHM systems needs widely accepted standards and guidelines. Standards help to design SHM systems in an optimal way. Currently, standardization gets increasing attention in civil engineering field; there are some activities e.g. in ISHMII, IEC and ISO groups to develop standards for the most important components of SHM systems. The paper gives an overview on current activities in standardization to propose sound and safe procedures for assessment of the existing structure's behavior and for estimation of its residual life. Special attention is paid in this paper to newly developed standards for fiber-optic measurement systems; important aspects of such sensor systems are mentioned. The contribution is aimed at owners of structures that have to be assessed as well as at developers of sensors and monitoring systems who have to select appropriate effective sensing technologies. Using standards, both parties find recommendations how to proceed in development SHM systems to estimate the design or residual life, and how to find out the optimal maintenance strategy. The usefulness of standardized procedures is shown using the example of risk-based management of structures. T2 - SMAR 2015 - 3rd Conference on smart monitoring, assessment and rehabilitation of civil structures CY - Antalya, Turkey DA - 07.09.2015 KW - SHM KW - Standardization KW - Reliability KW - Fibre-optic sensor KW - Embedded sensor KW - Monitoring KW - Maintenance PY - 2015 SN - 978-3-905594-65-2 SP - Paper 66, 1 EP - 8 AN - OPUS4-34192 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Hofmann, Detlef T1 - Requirements to establish fibre-optic sensors for monitoring of structures N2 - Fibre-optic sensors need to be more established in the sensor market. Their advantages have unquestionably been verified by numerous demonstrations. However, there are some open questions leading now and then to restraints in the user's community. The paper dicusses examples where fibre-optic sensors provide outstanding knowledge about the structure's behaviour, but application is often challenging. Requirements are listed and open questions to be solved are discussed. Short outlook to standards useful for better design, characterization and application is given. Standards are the basis for establiching SHM systems, especially for safety-critical structural diagnostics. T2 - EWSHM 2014 - 7th European workshop on structural health monitoring CY - Nantes, France DA - 08.07.2014 KW - Monitoring KW - Fibre-optic sensor KW - Reliability KW - Application PY - 2014 SP - 2330 EP - 2337 AN - OPUS4-32662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Kusche, Nadine T1 - Fibre-optic strain sensors are making the leap from lab to industrial use-reliability and validation as a precondition for standards N2 - Currently, fibre-optic sensors (FOSs) are commonly used if special requirements make the application of electrical sensors impossible, or economic benefit is promised. The scientific background of FOS technology is well developed; however, there are still some restrictions with respect to long-term reliable use. For widespread practical use, sensor products must be manufactured, characterized and validated according to standards. Guidelines on how to apply sensors and evaluate their operation on-site including special facilities to evaluate applied sensors are needed. This paper will focus on important aspects, such as when FOSs may be used under real practical conditions, and will present validation methodologies to evaluate the overall quality of the sensor system's function. It will also indicate the lack of knowledge and methods to be elaborated to promote the use of FOS. KW - Fibre-optic sensor KW - Application KW - Reliability KW - Validation KW - Strain transfer KW - Standards KW - Guideline PY - 2013 DO - https://doi.org/10.1088/0957-0233/24/9/094006 SN - 0957-0233 SN - 1361-6501 VL - 24 SP - 094006-1 EP - 094006-13 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-29916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Steinke, F. A1 - Basedau, Frank ED - Ilki, A. ED - Motavalli, M. ED - Goksu, C. ED - Havranek, B. T1 - Investigation of the fiber-optic strain sensors' beahvior under offshore conditions to create standards for reliable application N2 - The application of fiber-optic sensors in offshore environment is a big challenge. Especially if sensors have to be installed in the tidal zone and components are exposed to extreme environmental attacks as well as mechanical loads. There are no sufficient experience on how to test selected materials, how to handle application and how remotely to assess the function of installed sensors operating several decades during summer and winter time. It has to be feared that installed sensor components could be damaged in case of heavy storms and strong waves or due to ice drift. Another danger is the biological attack to sensors. Not only the high amount of salt and UV radiation could degrade the protecting materials of sensor systems, it is well-known that sea biological influences such as barnacles and other types of fouling perturb the proper function of sensors or even lead to failure. In Germany, a research project is being carried out to investigate the specific offshore influences to fiber-optic sensor systems with the objective to develop evaluation strategies and corresponding testing procedures and standards. The paper describes first results after harsh test cycles and gives first bullets for a corresponding standard for application in offshore environment. T2 - SMAR 2013 - 2nd Conference on smart monitoring, assessment and rehabilitation of civil structures CY - Istanbul, Turkey DA - 09.09.2013 KW - Fibre-optic sensor KW - Strain sensor KW - Reliability KW - Durability KW - Sensor characteristics KW - Offshore application KW - Harsh impacts PY - 2013 SN - 978-3-033-04055-7 SP - 1 EP - 8(?) CY - Istanbul, Turkey AN - OPUS4-29909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Kusche, Nadine ED - Peters, K.J. ED - Ecke, W. ED - Matikas, T.E. T1 - The role of experimental validation in achieving reliable measurement data with applied FBG strain sensors N2 - Fiber-optic strain sensors are increasingly used in very different technical fields. Sensors are provided with specifications defined by the manufacturer or ascertained by the interested user. In some cases, sensor specification is not sufficiently validated and must therefore additionally be validated in a laboratory, primarily to ensure reliable measurement information over the intended period of operation. Even if the performance of delivered sensor is well specified, the sensor's strain characteristics and the performance of an applied sensor can significantly differ from the virgin sensor's performance. In this case, applied sensors do not provide full reliability and lead sometimes to uncertain measurement results. This contribution will therefore focus on the role of validation in avoiding a decrease or even deterioration of the sensor function of applied sensors. Experimental validation - not only modelling - is very important, however, before experimental investigations are planned knowledge about key issues and problems that influence the measurement results must be available. Few aspects to be considered and investigated will be discussed. Selected experimental facilities to reveal weaknesses in the sensor function will be described; an outlook to open questions is given. T2 - Smart sensor phenomena, technology, networks, and systems integration 2013 CY - San Diego, CA, USA DA - 10.03.2013 KW - Fibre-optic sensor KW - Strain sensor KW - Reliability KW - Durability KW - Sensor characteristics KW - Application-related changes KW - Adhesive stability KW - Validation PY - 2013 DO - https://doi.org/10.1117/12.2009677 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8693 IS - Paper 12 SP - 86930C-1 - EP - 86930C-11 AN - OPUS4-29911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina A1 - Daum, Werner ED - Peters, K.J. T1 - Standardization in fibre-optic sensing for structural safety - activities in the ISHMII and IEC N2 - Fiber-optic sensors are increasingly established in the sensor market. Their advantages have unquestionably been verified by numerous demonstrations to enhance the operational performance of aged structures or to monitor the structural behavior of safety-relevant structures or their components. However, there are some barriers in use due to a lack of extensive standardization of fiber-optic sensors. This leads very often to restraints in the user’s community. The paper shows the status in international standardization of fiber-optic sensors as well as current activities in leading institutions such as IEC and ISHMII and others with the purpose of providing relevant standards for a broader use of selected fiber-optic sensor technologies. T2 - Smart sensor phenomena, technology, networks, and systems integration 2015 CY - San Diego, CA, USA DA - 08.03.2015 KW - Fibre-optic sensor KW - Standard KW - Temperature KW - Strain KW - Monitoring KW - Reliability KW - Application PY - 2015 DO - https://doi.org/10.1117/12.2185602 SN - 0277-786X VL - 9436 SP - 94360S-1 EP - 94360S-7 AN - OPUS4-33814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang ED - De Stefano, A. T1 - The role of standardization in establishing new monitoring technologies - example fibre-optic sensors N2 - Sensors for assessment of the structure’s behaviour must work durably and reliably. Even if the performance of produced and delivered sensor is well specified, the sensor's strain characteristics and the performance of an applied sensor can significantly differ from the virgin sensor’s performance. The quality and appropriateness of installation decides over the long-term operability and getting reliable measurement results. The paper shows how important a clear terminology is, which problems might occur when sensor are not well characterized according to Standards or guidelines. Short outlook to experimental methods providing clear knowledge and appropriate Validation of the sensor’s performance for a defined measurement task is given. Finally, the state of-the-art in fibre-optic sensor Standardization is given. T2 - SHMII-7 - 7th International conference on structural health monitoring of intelligent infrastructure CY - Torino, Italy DA - 01.07.2015 KW - SHM KW - Standardization KW - Reliability KW - Fibre-optic sensor KW - Embedded sensor KW - Surface-applied sensor KW - Application KW - Validation KW - Calibration PY - 2015 SP - 1 EP - 10 AN - OPUS4-33779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Basedau, Frank A1 - Hofmann, Detlef A1 - Krebber, Katerina A1 - Jentsch, H. A1 - Senze, A. ED - Ilki, A. ED - Motavalli, M. ED - Inci, P. ED - Köhli, M. T1 - Online-detection of slipping soil areas by embedded fiber-optic sensing rods N2 - Movements in geological areas are often caused by shear zones deep in the underground or by hardly observable slipping zones. Detection of movements reaching critical values is of crucial importance to avoid losses and harms. Optical sensor fibers with gauge lengths of several meters or even distributed fiber-optic sensors with gauge lengths of hundreds of meters allow detecting deformation of such zones with quite good resolution. The paper presents a new technology of detecting deformations and movements in soil or rock massifs. The core part of the sensing system is a tiny pultruded rod with an outer diameter of 3 mm to 6 mm. It contains two fiber-optic sensor systems. One sensor system is used for permanent online measurement and provides integral strain information along the whole length of the rod; in case of critical deformations, it provides a warning signal. The second sensing system uses fiber-optic Bragg grating (FBG) strain sensors located close to the expected shear zone. This measurement system will be activated after the warning signal has been initiated by the integral strain measurement system. The FBG strain sensor system records then resulting deformations in detail. The sensing rod containing both sensor systems can be installed in a borehole to detect beginning soil movements automatically. The electronic equipment is powered by a solar panel; the amount of deformation in soil or rock formations can be estimated from the strain change measured in the sensor fibers. The effectiveness of this warning system will be shown using the example of a critically sliding slope in an open brown coal pit in Germany. T2 - SMAR 2015 - 3rd Conference on smart monitoring, assessment and rehabilitation of civil structures CY - Antalya, Turkey DA - 07.09.2015 KW - SHM KW - Standardization KW - Reliability KW - Fibre-optic sensor KW - Embedded sensor KW - Monitoring KW - Maintenance PY - 2015 SN - 978-3-905594-65-2 SP - Paper 222, 1 EP - 8 AN - OPUS4-34544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Structural health monitoring systems for reinforced concrete structures KW - Structural health monitoring KW - Sensors KW - Fibre-optic sensor KW - Damage assessment KW - Reinforced concrete PY - 2010 SN - 978-1-84569-950-5 VL - 2 SP - 63 EP - 94 PB - Woodhead Publ. AN - OPUS4-22984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Habel, Wolfgang T1 - Fibre-optic sensors embedded in geotechnical textiles and concrete piles for structural health monitoring N2 - Fibre-optic sensors are more and more used in geotechnical and civil engineering. There are a big number of applications with the purpose of improvement or proof of the structural integrity. This paper, presents two examples where different fibre sensor types.are exploited for safety-relevant task in geotechnique. Technical textiles with embedded distributed fibre-optic sensors based on Brillouin Scattering in silica optical fibres and OTDR (optical time-domain reflectometry) in polymer optical fibres are presented. Such “smart” technical textiles can be used for reinforcement of geotechnical structures and masonry walls, and the embedded fibre-optic sensors can provide information about the condition of the structures as well as detect the presence of any damage and destructions in real time. Highly sensitive fibre-optic geophones based on Fabry-Perot sensors embedded in large concrete pile can be used for precise measurement of Deformation and wave distribution during static and dynamic pile test. Such sensors make the evaluation of the pile’s integrity and load-bearing capacity easier. KW - Faseroptischer Sensor KW - Verteilter Sensor KW - Brillouin-Sensor KW - Polymeroptischer Sensor KW - POF OTDR KW - Technisches Textil KW - Geotextil KW - Dehnungssensor KW - Geophon KW - Pfahltest KW - Akustische Welle KW - Fabry-Perot KW - Fibre-optic sensor KW - Distributed sensor KW - Polymer optical fibres (POF) KW - POF sensor KW - Strain sensor KW - Technical textiles KW - Geotextiles KW - Geophone KW - Fabry-Perot sensor KW - Pile test KW - Impact KW - Acoustic wave PY - 2011 SN - 0002-5968 VL - 7 SP - 252 EP - 263 PB - Wichmann CY - Heidelberg AN - OPUS4-24816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina T1 - Application of fiber-optic sensors for health monitoring purposes in geo-engineering T2 - 4th International forum on opto-electronic sensor-based monitoring in geo-engineering CY - Suzhou, China DA - 2012-10-11 KW - BOFDA KW - Fibre-optic sensor KW - Distributed sensor KW - Brillouin sensor KW - Polymer optical fibers (POF) KW - POF sensor KW - POF OTDR KW - Strain sensor KW - Technical textiles KW - Geotextiles KW - Geophone KW - Fabry-Perot sensor KW - Pile test KW - Impact KW - Acoustic wave PY - 2012 SP - 4 EP - 15 AN - OPUS4-27259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Habel, Wolfgang A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Barner, Andreas A1 - Crail, S. A1 - Reichel, D. A1 - Schreiner, U. A1 - Lindner, E. T1 - Static and dynamic measurements on a newly developed precast concrete track for high speed railway traffic using embedded fiber-optic sensors T2 - International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the Age Globalization CY - Celle, Germany DA - 2002-09-24 KW - Railway track system KW - Bonding behaviour KW - Fibre-optic sensor KW - Concrete composites PY - 2002 SN - 3-18-091685-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1685 SP - 147 EP - 152 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-1755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -