TY - JOUR A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Schertel, A. A1 - Wöll, Ch. T1 - Surface analysis of partially crystalline and amorphous poly(ethylene terephthalate) samples by x-ray absorption spectroscopy (NEXAFS) KW - NEXAFS KW - Röntgenadsorptionsspektroskopie KW - Oberflächenanalyse KW - Polymeroberfläche PY - 1996 SN - 0032-3861 SN - 1873-2291 VL - 37 IS - 14 SP - 3151 EP - 3155 PB - Springer CY - Berlin AN - OPUS4-650 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lippitz, Andreas A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Schertel, A. A1 - Wöll, Ch. T1 - NEXAFS analysis of a plasma treated, partially crystalline poly(ehtylene terephtalate) surface KW - NEXAFS KW - Röntgenstrukturanalyse KW - Oberflächen behandeln KW - Plasma PY - 1996 SN - 0179-4159 SP - 279 EP - 281 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Friedrich, Jörg Florian A1 - Wöll, Ch. A1 - Nick, L. T1 - The Use of Octadecyltrichlorosilane Self-Assembled Layers as a Model for the Assessment of Plasma Treatment and Metallization Effects on Polyolefins N2 - Self-assembled octadecyltrichlorosilane (CH3(CH2)17SiCl3, OTS) films were deposited on an oxidized silicon wafer. They were carefully exposed to a low-pressure oxygen direct current (dc) plasma and/or Cr vapor. Subsequently, they were characterized by X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and atomic force microscopy. Detailed information on the oxygen functionalization and the molecular conformation of the OTS films was obtained. The main result was that functionalization conditions can be found where the order of the film remains almost unaffected. Similarly, Cr evaporation of pure OTS films revealed only slight effects on the order in the film. Cr evaporation of an ordered but functionalized OTS film immediately changes its state toward a fully isotropic one. In the course of interaction, oxygen sites at the surface of the functionalized OTS film are reduced whereas Cr becomes oxidized. A redox reaction scheme is proposed for this interfacial reaction. Finally, it is concluded that the given study should be of importance for advanced plasma processing of polyolefins. KW - NEXAFS KW - OTS Self-Assembled Layers PY - 1999 DO - https://doi.org/10.1021/la981174l SN - 0743-7463 SN - 1520-5827 VL - 15 IS - 4 SP - 1161 EP - 1166 PB - American Chemical Society CY - Washington, DC AN - OPUS4-808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Giebler, Rainer A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Reactions and Intermediates at the Metal-Polymer Interface as Observed by XPS and NEXAFS Spectroscopy KW - XPS KW - NEXAFS KW - Interfacial polymer-metal redox reactions KW - Chromium-polymer intermediates KW - Near edge X-ray absorption fine structure spectroscopy KW - Adhesion KW - Polymer-metal bonds KW - Polymer-aluminium bonds KW - Polymer-copper bonds PY - 1999 SN - 0021-8464 SN - 1545-5823 VL - 71 SP - 297 EP - 321 PB - Gordon & Breach CY - New York, NY AN - OPUS4-798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Mc Inerney, T. A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Cross, C.E. ED - Cerjak, H. T1 - The influence of local weld deformation on hot cracking susceptibility T2 - 6th International Seminar on the Numerical Analysis of Weldability CY - Seggauberg, Austria DA - 2001-10-01 PY - 2002 SN - 1-902653-56-4 N1 - Serientitel: Books of IOM3 – Series title: Books of IOM3 IS - 784 SP - 803 EP - 818 PB - Maney CY - London AN - OPUS4-1793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Florian, Wolfgang A1 - Herold, H. T1 - Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components N2 - Düring the past decades, weldability studies have predominantly been concentrated on the material and the welding process. In order to achieve a closer insight into the structural effects, component weldability tests have been performed by online monitoring of the reaction forces and moments. As a particular item, the effects of different strengths of the base and filier material on the reaction force and stress build up transverse to the welding direction have been studied at a specific structural restraint. As a most relevant result for practical welding it is demonstrated that the final reaction force and also the reaction stress level in the multilayer butt welds decreases with overmatch of the weld metal. PY - 2000 IS - IX-1971-00 SP - 1 EP - 18 PB - International Institute of Welding CY - Paris AN - OPUS4-11842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Zimmer, Peter A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas T1 - Kaltrissprüfungen für hochfeste Feinkornbaustähle T2 - Große Schweißtechnische Tagung "Schweißen und Schneiden" 2004 CY - Magdeburg, Deutschland DA - 2004-09-22 PY - 2004 SN - 3-87155-689-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 232 SP - 207 EP - 214 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-4634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas T1 - Einfluss des Einspanngrades auf die Beanspruchung beim Schweißen eingespannter Bauteile T2 - 18. Tagung Werkstoffprüfung 2000 ; 18. Vortrags- und Diskussionstagung Werkstoffprüfung 2000 CY - Bad Nauheim, Deutschland DA - 2000-12-07 PY - 2000 SP - 95 EP - 102 PB - Dt. Verband für Materialforschung CY - Berlin AN - OPUS4-980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Herold, H. ED - Miannay, D. P. T1 - Analysis of welding reaction stresses and welding reaction moments in component tests - Stress characteristics dependent on the intensity of restraint N2 - Up to the present, the thermomechanical loads during welding and subsequent cooling under design-specific shrinkage restraint resulting from the interaction between the materials and the structure have often not been taken into consideration approperiately for weldability assessment of components. As compared to previous investigations using small specimens this report presents component weld tests under varying intensities of restraint. Online records of the reaction forces and moments demonstrate in which way the intensity of restraint affects the reaction stresses and moments and their meaning for the evaluation of the load level in welded components. T2 - EUROMAT Topical 2000 CY - Tours, France DA - 07.11.2000 PY - 2000 SN - 0-08-042815-0 VL - 1 SP - 145 EP - 150 PB - Elsevier CY - Amsterdam AN - OPUS4-11847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas A1 - Hoffmeister, H. A1 - Stiebe-Springer, I. A1 - Florian, Wolfgang A1 - Michael, Thomas T1 - Component testing of welded supermartensitic stainless steel pipes T2 - EUROCORR 2000 CY - London, England, UK DA - 2000-09-10 PY - 2000 SP - 1 EP - 10 PB - IOM Communications CY - London AN - OPUS4-22138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Florian, Wolfgang A1 - Herold, H. T1 - Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components PY - 2001 SN - 0043-2288 SN - 1878-6669 VL - 45 IS - 1-2 SP - 18 EP - 26 PB - Springer CY - Oxford AN - OPUS4-16544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Stark, Wolfgang A1 - Bovtun, V. A1 - Friedrich, Jörg Florian ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - Techniques for surface composition analysis with scanning force microscopy (SFM) using electrical surface properties T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 579 EP - 582 PB - Wiley CY - Chichester AN - OPUS4-6854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -