TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Oberflächenvorbehandlung von Polypropylen in elektrischen Entladungen PY - 1995 SN - 0590-8450 VL - 1 SP - 123 EP - 127 PB - Verl. Coating Thomas CY - St. Gallen AN - OPUS4-7005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. ED - Mittal, K. L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate T2 - International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Las Vegas, NV, USA DA - 1993-11-03 KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1996 SN - 90-6764-201-0 VL - 1 SP - 121 EP - 136 PB - VSP CY - Utrecht AN - OPUS4-7006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. ED - Mittal, K. L. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1996 SN - 90-6764-201-0 SP - 49 EP - 72 PB - VSP CY - Utrecht AN - OPUS4-7007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian T1 - Plasmabehandelte Polymere charakterisieren PY - 1995 SN - 0025-5300 VL - 37 IS - 6 SP - 233 EP - 237 PB - Carl Hanser Verlag CY - München AN - OPUS4-7009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1995 SN - 0169-4243 SN - 1568-5616 VL - 9 IS - 5 SP - 575 EP - 598 PB - VNU Science Press CY - Utrecht AN - OPUS4-7010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Geng, Sh. A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Neue Erkenntnisse zur Plasmamodifizierung von Polymeroberflächen PY - 1995 SN - 0949-8214 VL - 1 SP - 36 EP - 42 PB - Technische Fachhochschule CY - Wildau AN - OPUS4-7011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas T1 - Plasma Modification of Polymer Surfaces PY - 1995 SN - 1022-1360 SN - 0258-0322 SN - 1521-3900 VL - 100 SP - 111 EP - 115 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-7012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. A1 - Erdmann, J. A1 - Gorsler, H.-V. A1 - Nick, L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1995 SN - 0169-4243 SN - 1568-5616 VL - 9 IS - 9 SP - 1165 EP - 1180 PB - VNU Science Press CY - Utrecht AN - OPUS4-7013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - X-ray Absorption Spectroscopy (NEXAFS) of PET Surfaces T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 755 EP - 759 PB - Wiley CY - Chichester AN - OPUS4-7288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gross, Thomas A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Time-of-flight-SIMS and XPS characterization of metal doped polymers N2 - Organic thin films with defined chemical structures and physical properties are required for various applications. Plasma polymerization is of technological interest, since the deposition of plasma polymers is possible on any material of any shape in the desired thickness. We report on the TOF-SIMS (TOF: time-of-flight) and XPS investigations of pulse plasma ‘poly(acetylene)’ and alkali metal doped pulse plasma ‘poly(acetylene)’ films. The combination of TOF-SIMS and XPS supplies detailed information on the surface chemistry of these films. Application of both methods provides the possibility for cross-checking certain results. Moreover the different sensitivities of the methods can be utilized. According to the TOF-SIMS and XPS data it can be concluded that the interaction of alkali metals with plasma ‘poly(acetylene)’ results in electrovalent bonds of the type Me?+–C?- between carbon and metal. Furthermore carbon–oxygen–metal interactions were observed. These interactions are of the type C=O?-cdots, three dots, centeredMe?+ and/or C–O?-–Me?+. KW - SIMS KW - TOF-SIMS KW - XPS KW - Plasma KW - Polymer KW - Poly(acetylene) PY - 2003 DO - https://doi.org/10.1016/S0169-4332(02)00769-9 SN - 0169-4332 SN - 1873-5584 VL - 203-204 SP - 575 EP - 579 PB - North-Holland CY - Amsterdam AN - OPUS4-2271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Florian, Wolfgang T1 - Schweißen in der Kerntechnik. Bericht über das 2. Internationale Kolloquium "Schweißen in der Kerntechnik" des DVS PY - 1975 SN - 0004-721X VL - 20 IS - 2 SP - 95 PB - Verl. Handelsblatt CY - Düsseldorf AN - OPUS4-8337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Florian, Wolfgang T1 - Mikro-Ultraschallschweißverbindungen von Golddrähten auf Halbleiterbausteine PY - 1975 SN - 1434-2898 VL - 20 IS - 17-18 SP - 341 EP - 343 PB - Hüthig CY - Heidelberg AN - OPUS4-8338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Florian, Wolfgang T1 - Verfahrenskontrolle und -optimierung am Beispiel des Mikro-Ultraschall-Schweißens PY - 1975 SN - 0049-5921 VL - 7 IS - 1 SP - 31 EP - 34 PB - Ingenieur Digest Verl. CY - Frankfurt, M. AN - OPUS4-8339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Florian, Wolfgang T1 - Festigkeit von Mikro-Ultraschallschweißverbindungen zwischen Gold- oder Aluminiumdrähten und Halbleiterbausteinen T2 - Internationales Kolloquium Löten und Schweißen in der Elektronik CY - München, Deutschland DA - 1976-11-25 PY - 1976 SN - 3-87155-339-5 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 40 SP - 122 EP - 126 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-8565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaenicke, Bernd A1 - Helms, Rolf A1 - Florian, Wolfgang A1 - Lipp, H. A1 - Seidl, W. A1 - Kaiser, B. T1 - Untersuchungen zur Zeit- und Kurzzeitschwingfestigkeit von St E 47 und St E 70 im geschweißten und ungeschweißten Zustand T2 - 5. Sitzung des Arbeitskreises "Betriebsfestigkeit" CY - Stuttgart, Deutschland DA - 1979-10-08 PY - 1979 VL - 5 SP - 597 EP - 619 PB - DVM CY - Stuttgart AN - OPUS4-9050 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Florian, Wolfgang A1 - Neumann, Volker T1 - Maßnahmen zur Begrenzung des Wasserstoffgehaltes im Schweißgut von Feinkornbaustählen T2 - 3. Internationales Kolloquium Schweißen in der Kerntechnik CY - Hamburg, Deutschland DA - 1978-11-28 PY - 1978 SN - 3-87155-353-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 52 SP - 173 EP - 178 PB - Deutscher Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-9013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prinz, N. A1 - Neumann, Eberhard A1 - Florian, Wolfgang A1 - Neumann, Volker A1 - Thiel, R. T1 - Schallemission als Mittel zur Beobachtung von Rißbeginn und Rißfortschritt bei Kaltrissen in geschweißten niedrig legierten hochfesten Stählen PY - 1980 SN - 0025-5300 VL - 22 IS - 9 SP - 361 EP - 364 PB - Carl Hanser Verlag CY - München AN - OPUS4-9418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Volker A1 - Florian, Wolfgang T1 - Beitrag zur Durchführung und Auswertung von Implantversuchen PY - 1980 SN - 0036-7184 VL - 32 IS - 9 SP - 383 EP - 387 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-9447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Contribution on the Formation of Toxic substances in gas shielded arc welding and determination of Requiered Exhaustion Capacity T2 - Colloque sur Soudage et Santé CY - Estoril, Portugal DA - 1980-07-08 PY - 1980 SP - 1 EP - 8 PB - Instituto de Soldadura CY - Lisboa AN - OPUS4-9451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface analysis of Plasma Deposited Polymer Films, 5 - ToF-SSIMS Characterization of Plasma Deposited Allyl Alcohol Films N2 - The effect of the composite plasma parameter P/F, where P is the plasma power and F is the monomer flow rate, on the chemical character of pulsed plasma deposited allyl alcohol films was investigated by ToF-SSIMS. Information on the unsaturated character, the cross-linked and/or branched character of the plasma polymer films was derived in detail. The problem of the retention of OH groups in plasma deposited allyl alcohol films was elucidated in detail using SSIMS data. The lowest conversion rate from the monomer's hydroxyl groups to other oxygen functionalities in the plasma was concluded for the plasma polymer film produced at a P/F ratio of 0.05 W · sccm-1. It was found that the overall oxygen content of the films decreased vs. increasing P/F ratio. Because the freshly prepared films were investigated without air exposure, ageing on ambient air could be studied in detail. It was found that in the case of plasma deposited allyl alcohol films the ageing on air is probably based on two competing processes which are discussed in detail. Additionally, a review of literature data on the characterization of plasma deposited allyl alcohol films is given. KW - Ageing KW - Allyl alcohol KW - Plasma polymerization KW - ToF-SIMS PY - 2005 DO - https://doi.org/10.1002/ppap.200400075 SN - 1612-8850 SN - 1612-8869 VL - 2 IS - 7 SP - 563 EP - 571 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Aging of Plasma-Deposited Films Prepared from Organic Monomers N2 - Plasma-deposited polymer films were prepared from organic molecules and investigated using near edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for aging effects after exposure to air. Results from the investigation of homopolymers are summarized. Primarily the effect of the deposition parameters duty cycle and power are dealt with. The effect of the deposition parameter pressure is briefly discussed. An example to show the effect of feed gas composition on the aging of plasma polymerized ethylene/allyl alcohol and styrene/allyl alcohol copolymer is also given. In general, change in content of unsaturated or aromatic species, change in concentration of monomer functionality, and change in the oxygen content was observed in the plasma polymerized films on aging. KW - Plasma copolymer KW - ESCA/XPS KW - NEXAFS KW - Plasma polymerization PY - 2007 SN - 1612-8850 SN - 1612-8869 VL - 4 IS - S1 SP - S784 EP - S789 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Lippitz, Andreas A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface Analysis of Plasma-Deposited Polymer Films, 4 - In situ Characterization of Plasma-Deposited Ethylene Films by XPS and NEXAFS N2 - XPS and NEXAFS spectroscopy were used for the chemical characterization of pulsed plasma-deposited ethylene films before and after exposure to ambient air. The influence of external plasma parameters on the spectroscopic results was investigated. Information on the chemical character of the plasma-polymerized films, such as the regularity of the primary structure, the amount of long-living radicals, and branching or cross-linking or both was derived from this data. Irregularity and radical concentration for post-plasma reactions of the plasma-deposited films increased with the duty cycle or power. A decreased level of monomer fragmentation and, consequently, an increase in regularity is partially concluded from the experimental data when the monomer pressure is increased. The concentration of surface radicals available for post-plasma reactions also increased with monomer pressure. The correlation found between the degree of the post-plasma oxygen incorporation and the variation of the various external parameters agreed with earlier ToF-SSIMS findings. KW - ESCA/XPS KW - NEXAFS KW - Plasma polymerization KW - Polyethylene (PE) KW - Thin films PY - 2005 DO - https://doi.org/10.1002/ppap.200400070 SN - 1612-8850 SN - 1612-8869 VL - 2 IS - 4 SP - 310 EP - 318 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface analysis of plasma-deposited polymer films by Time of Flight Static Secondary Ion Mass Spectrometry (ToF-SSIMS) before and after exposure to ambient air N2 - Pulsed plasma deposited styrene and ethylene films were studied by Time of Flight Static Secondary Ion Mass Spectrometry (ToF-SSIMS) before and after exposure to ambient air. The influence of the external plasma parameters on the secondary ion mass spectra of plasma deposited films was investigated. Approaches for the interpretation of SSIMS spectra of organic materials were reviewed and applied to the evaluation of SSIMS data of plasma deposited films. From these data, information on the chemical character of the plasma deposited films was derived. When the plasma polymers are exposed to air oxygen incorporation occurs. The oxygen uptake is high at the beginning and then it levels of. A relation that “higher the regularity of the film lower is the oxygen uptake” was found. Harder plasma conditions, which could be obtained by applying higher plasma power or lower monomer flow rate, result in higher oxygen uptake and vice versa. KW - Plasma polymerization KW - Polyethylene (PE) KW - Polystyrene (PS) KW - SIMS KW - Ageing PY - 2005 DO - https://doi.org/10.1016/j.surfcoat.2005.02.032 SN - 0257-8972 VL - 200 IS - 1-4 SP - 463 EP - 467 PB - Elsevier Science CY - Lausanne AN - OPUS4-11044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Study of influence of external plasma parameters on plasma polymerised films prepared from organic molecules (acrylic acid, allyl alcohol, allyl amine) using XPS and NEXAFS N2 - Plasma polymerised films of acrylic acid, allyl alcohol and allyl amine were prepared and studied by XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy). The influence of external plasma parameters on certain chemical aspects of the films was investigated. The use of XPS and NEXAFS (near edge X-ray absorption fine structure) as complimentary tools in the surface characterisation of thin films has been highlighted. Certain chemical aspects of the plasma polymerised films such as presence of ROCdouble bond; length as m-dashO in the case of plasma polymerised acrylic acid films, presence of RCdouble bond; length as m-dashO and RC–OR bonds in case of plasma polymerised allyl alcohol films and presence of RCdouble bond; length as m-dashN and C?N in case of plasma polymerised allyl amine films were studied. The concentration of ROCdouble bond; length as m-dashO species was found to decrease with increase in r.f. duty cycle in the case of plasma polymerised acrylic acid films. In case of plasma polymerised allyl alcohol films there is a decrease in the concentration of RCdouble bond; length as m-dashO species and increase in the concentration of RC–OR species at higher pressures, while in the case of plasma polymerised allyl amine films the concentration of RCdouble bond; length as m-dashN and C?N increases at higher powers, with an increase in C?N more pronounced at higher powers. KW - Plasma polymerization KW - NEXAFS KW - XPS KW - Plasma parameter PY - 2005 DO - https://doi.org/10.1016/j.surfcoat.2005.01.083 SN - 0257-8972 VL - 200 IS - 1-4 SP - 494 EP - 497 PB - Elsevier Science CY - Lausanne AN - OPUS4-11045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Static ToF-SIMS analysis of plasma chemically deposited ethylene/allyl alcohol co-polymer films N2 - A plasma co-polymerization of ethylene as a “chain extending” monomer and allyl alcohol as a carrier monomer for hydroxyl groups was studied. The composition of the feed gas was systematically varied and the plasma co-polymers were analyzed in terms of their relative concentrations of OH functional groups by static Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) immediately after their preparation without any air contact, i.e., under so called “in situ” conditions. The relative OH group concentration involved in the –CH2–OH groups was derived from the normalized yields of the CH3O+ secondary fragment ion. The density of functional groups in the plasma co-polymers was found to vary non-linearly with respect to the mole percentage of the monomers in the feed gas. Co-polymerization phenomena, i.e. chemical interactions and recombination reactions taking place between monomer molecules in the plasma and/or during the deposition process, become evident in ToF-SIMS spectra. KW - Plasma deposition KW - ToF-SIMS KW - Plasma co-polymerization KW - Ethylene KW - Allyl alcohol PY - 2006 DO - https://doi.org/10.1016/j.apsusc.2006.02.089 SN - 0169-4332 SN - 1873-5584 VL - 252 IS - 19 SP - 6588 EP - 6590 PB - North-Holland CY - Amsterdam AN - OPUS4-13724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Surface Chemical Analysis of Plasma-Deposited Copolymer Films Prepared from Feed Gas Mixtures of Ethylene or Styrene with Allyl Alcohol N2 - Plasma deposited styrene/allyl alcohol and ethylene/allyl alcohol copolymer films were prepared and characterized using XPS, NEXAFS and ToF-SIMS. The relative partial flow rates of the co-monomers are used as deposition process parameters to vary and all other process parameters were constrained to conditions optimized for retention of functional groups. By doing this it is possible to control certain chemical properties of the copolymer films such as unsaturation, oxygen and hydroxyl group relative surface contents. The aging behavior of the plasma copolymer films on air was studied, too. Non-linear variations of relative oxygen contents, contents of C—OR species and contents of carbonyl species are obtained vs. variation of feed gas composition for both monomer combinations. The chemical character of the plasma copolymer films varies between the limits given by the respective plasma homopolymers. The observed non-linear correlations are discussed in terms of approaches developed for classic radical copolymerization. The aging behavior of the different plasma copolymers films depends on the feed gas composition. Principally these aging phenomena known from plasma polymer aging studies of that respective monomer which dominates the character of the plasma copolymer are observed. KW - Plasma polymers KW - Plasma copolymers KW - XPS KW - NEXAFS KW - Allyl alcohol KW - ESCA/XPS KW - Plasma polymerization KW - ToF-SIMS PY - 2007 SN - 1612-8850 SN - 1612-8869 VL - 4 IS - 4 SP - 376 EP - 389 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -