TY - JOUR A1 - Aurich, Dietmar A1 - Wobst, Klaus A1 - Ziebs, Josef A1 - Schönherr, Wolfgang A1 - Florian, Wolfgang A1 - Wilken, Klaus A1 - Soete, W. A1 - Vinkier, A. A1 - Denys, R. A1 - Hagedorn, K. E. T1 - Ergebnisse von Gemeinschaftsversuchen zur Spannungsarmglühgrenze PY - 1983 SN - 0003-8962 VL - 3 SP - 109 EP - 116 PB - Verl. Stahleisen CY - Düsseldorf, Germany AN - OPUS4-35978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Florian, Wolfgang A1 - Neumann, Volker A1 - Schönherr, Wolfgang A1 - Wilken, Klaus T1 - Einfluß von Wärmeeinbringen und Nahtgeometrie auf die Eigenschaften von Schweißverbindungen an StE 460 N und StE 500 N PY - 1982 SN - 0418-9639 VL - 74 SP - 253 EP - 261 PB - Dt. Verl. für Schweißtechnik CY - Düsseldorf AN - OPUS4-36441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang ED - Interrante, C. G. T1 - The hydrogen influenced cold cracking tendency of low alloyed high strength steels - evaluated by the implant test T2 - First International Conference on Current Solutions to Hydrogen Problems in Steels CY - Washington, DC, USA DA - 01.11.1982 PY - 1982 SN - 0-87170-148-0 N1 - Schriftenreihe: IIW Document; IX-1244-82 SP - 147 EP - 152 CY - Metals Park, Ohio AN - OPUS4-36465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang T1 - Der Wasserstoffgehalt von Schweißzusatz- und -hilfsstoffen PY - 1979 SN - 0340-4803 SN - 0340-479x VL - 99 IS - 17 SP - 944 EP - 947 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-9217 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang T1 - Aufnahme und Abgabe von Wasserstoff im Lichtbogenbereich beim Schweißen PY - 1979 SN - 0340-4803 SN - 0340-479x VL - 99 IS - 20 SP - 1114 EP - 1117 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-9218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang T1 - Wasserstoff im Schweißgut und sein Übergang in die Wärmeeinflußzone PY - 1979 SN - 0340-4803 SN - 0340-479x VL - 99 IS - 22 SP - 1260 EP - 1265 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-9219 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aurich, Dietmar A1 - Wobst, Klaus A1 - Ziebs, Josef A1 - Schönherr, Wolfgang A1 - Florian, Wolfgang A1 - Wilken, Klaus A1 - Soete, W. A1 - Vinkier, A. A1 - Denys, R. A1 - Hagedorn, K. E. T1 - Untersuchungen zum Problem der Spannungsarmglühgrenze PY - 1980 SP - 69 EP - 76 PB - Technische Vereinigung der Grosskraftwerksbetreiber CY - Essen AN - OPUS4-9245 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Volker A1 - Florian, Wolfgang A1 - Schönherr, Wolfgang T1 - Die Bewertung der wasserstoffbeeinflußten Kaltrißneigung mit der Implant-, TRC- und Lehigh-Probe T2 - Symposium Prüfverfahren zur Beurteilung der Kaltrißanfälligkeit von Stählen CY - Düsseldorf, Deutschland DA - 1980-03-20 PY - 1980 SN - 3-87155-365-4 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte VL - 64 IS - 64 SP - 56 EP - 62 CY - Düsseldorf AN - OPUS4-9448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schönherr, Wolfgang A1 - Florian, Wolfgang A1 - v. der Linden, Heidi ED - Becker, Gerhard Wilhelm T1 - Einfluß von Handschweißstromquellen und Werkstoffanisotropie auf die Güte von Schmelzschweißverbindungen PY - 1973 SP - 517 EP - 520 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9692 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Amon, H. A1 - Florian, Wolfgang T1 - Härtemessungen in der Wärmeeinflusszone von Schweissverbindungen T2 - Tagung Werkstoffprüfung CY - Bad Nauheim, Germany DA - 1984-12-06 PY - 1985 SP - 115 EP - 131 PB - DVM CY - Berlin AN - OPUS4-34254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Wolfgang T1 - Stand der Normung, Forschungs- und Entwicklungsaktivitäten im Bereich der Kaltrißbildung PY - 1985 SP - 1 EP - 15 PB - SLV-Duisburg CY - Duisburg AN - OPUS4-34257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Florian, Wolfgang A1 - Jafari, S. T1 - Meßtechnische Erfassung von Bondparametern PY - 1985 SN - 0172-6250 SN - 0943-0962 SP - 365 EP - 367 PB - Konradin-Verl. CY - Leinfelden-Echterdingen AN - OPUS4-34258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Wolfgang A1 - Jaenicke, Bernd T1 - Entwicklung von Konstruktions- und Fertigungsrichtlinien zur optimalen Gestaltung und Herstellung geschweißter, einsatzgehärteter Großzahnräder T2 - Informationstagung des Wissenschaftlichen Beirats der Forschungsvereinigung Antriebstechnik CY - Bad Soden, Germany DA - 1985-11-12 PY - 1985 SP - 1 EP - 18 PB - Forschungsvereinigung Antriebstechnik CY - Frankfurt am Main AN - OPUS4-34259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Formation of toxic substances in gas shielded arc welding PY - 1985 SN - 0043-2288 SN - 1878-6669 VL - 23 IS - 1/2 SP - 4 EP - 12 PB - Springer CY - Oxford AN - OPUS4-34270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Hidde, Gundula A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Plasma bromination of graphene for covalent bonding of organic molecules N2 - Plasma-chemical bromination applied to graphitic materials, in particular to highly ordered pyrolytic graphite is reviewed. The resulting bromination efficiency of the plasma-chemical treatment was subject of systematic process optimization. The plasma of elemental bromine vapour produced bromine concentrations on graphene surfaces of more than 30 % Br/C using either inductively or capacitively coupled low-pressure radio-frequency plasmas. Plasma brominated graphite surfaces have been studied by Near Edge X-ray Absorption Fine Structure, X-ray Photoelectron Spectroscopy, Atomic Force Microscopy and Scanning Electron Microscopy. The introduction of bromine into graphene-like graphite layers and its binding situation were investigated. To study the physical effect of the plasma bromination process, Kr plasma was also used because of its chemical inertness but similar atomic mass. Covering the samples with a Faraday cage or with a LiF window should help to differentiate between physical, chemical and radiation effects of the plasma. Bromination was assigned to radical or electrophilic addition of bromine onto fully substituted aromatic double bonds (sp² C) with exothermal reaction enthalpy. Low bromination shows a strong decay of aromatic double bonds, higher bromination percentage let disappear all aromatic rings. The formed C–Br bonds were well suited for efficient grafting of organic molecules by post-plasma wet-chemical nucleophilic substitution. This grafting onto the graphene surface was demonstrated using aminosilane and different diamines. The bromination of double bonds changes the hybridization of carbon atoms from plane sp² to tetrahedral sp³ hybridization. Thus, the plane topography of graphene is destroyed and the conductivity is lost. KW - Graphene KW - Bromination KW - Grafting of diamines KW - Plasma KW - Organic graphting PY - 2014 DO - https://doi.org/10.1007/s11090-013-9509-x SN - 0272-4324 VL - 34 SP - 621 EP - 645 PB - Plenum Publ. Corp. CY - New York, NY, USA AN - OPUS4-30575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Wolfgang A1 - Jaenicke, Bernd T1 - Verformungsmessungen an einem geschweißten Zahnrad infolge Spannungsarmglühen, Aufkohlen und Härten T2 - Informationstagung des Wissenschaftlichen Beirates der FVA CY - Mannheim, Germany DA - 24.11.1982 PY - 1982 SP - 1 EP - 42 CY - Frankfurt am Main AN - OPUS4-36439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Florian, Wolfgang A1 - Neumann, Volker ED - Interrante, C. G. T1 - Influence of the H2-content in the shielding gas (during tig-welding) on the diffusible hydrogen in the weld metal and the cold cracking sensitivity of implant specimens T2 - First International Conference on Current Solutions to Hydrogen Problems in Steels CY - Washington, DC, USA DA - 01.11.1982 PY - 1982 SN - 0-87170-148-0 SP - 119 EP - 123 CY - Metals Park AN - OPUS4-36440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Formation of toxic substances in gas shielded arc welding PY - 1982 IS - VIII-1080-83 SP - 1 EP - 34 CY - Paris AN - OPUS4-36481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Untersuchung der Fremdstoffbildung beim Schutzgasschweißen - Grundlagen, Versuchseinrichtung, Erprobung PY - 1982 SN - 0036-7184 VL - 34 IS - 4 SP - 199 EP - 203 PB - DVS-Media GmbH CY - Düsseldorf AN - OPUS4-36482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Untersuchung der Fremdstoffbildung beim Schutzgasschweißen - Wolfram-Inertgasschweißen von legiertem Stahl und Aluminiumlegierungen PY - 1982 SN - 0036-7184 VL - 34 IS - 9 SP - 437 EP - 440 PB - DVS-Media GmbH CY - Düsseldorf AN - OPUS4-36483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Preß, Henning A1 - Florian, Wolfgang T1 - Untersuchung der Fremdstoffbildung beim Schutzgasschweißen - Metall-Inertgas- und Metall-Aktivgasschweißen von Aluminium und Stahl N2 - Ermittelt werden die beim Metall-Aktivgas- und Metall-Inertgasschweißen von unlegiertem Stahl, austenitischem Chrom-Nickel-Stahl und Aluminiumwerkstoffen (Reinaluminium und Aluminiumlegierungen) entstehenden Fremdstoffmengen (Rauch, Ozon, Stickstoffoxide, Kohlenmonoxid) abhängig von den Schweißparametern, insbesondere von der Schweißstromstärke, der Lichtbogenspannung und der Schutzgasart. Die je Zeiteinheit entstehenden Fremdstoffmengen können nicht unmittelbar in Fremdstoffkonzentrationen am Arbeitsplatz umgerechnet werden. PY - 1983 SN - 0036-7184 VL - 35 IS - 5 SP - 211 EP - 216 PB - DVS-Media GmbH CY - Düsseldorf AN - OPUS4-40723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Min, Hyegeun A1 - Wettmarshausen, Sascha A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - A ToF-SIMS study of the deuterium-hydrogen exchange induced by ammonia plasma treatment of polyolefins N2 - ToF-SIMS has been used to study the surface functionalization of polypropylene and polyethylene samples by exposure to low-pressure ammonia plasma. Static secondary ion mass spectrometry is an appropriate tool to determine hydrogen isotopes as elements and in fragment ions with high sensitivity and selectivity. Specifically the exchange of hydrogen isotopes and the incorporation of N-containing moieties in the near-surface layer of the polyolefins have been studied in ND3 plasma experiments with conventional polypropylene (h-PP) and polyethylene (h-PE) and NH3 plasma experiments with deuterated polyethylene (d-PE). Considering the exchange of hydrogen between the plasma and the polymer surface studied by using deuterated ammonia and polyolefin samples the conclusion has been derived that polypropylene with its side chain methyl groups is more susceptible to hydrogen exchange reactions. For ND3 plasma treatment of polyethylene and polypropylene similar N-containing fragments were obtained and the measured semi-quantitative ToF-SIMS N-uptake data are rather similar. The observation of a wide range of characteristic mixed CkNlHmDn+ secondary fragment ions suggests complex and manifold reaction pathways at the polymer–plasma interface besides simple grafting of –ND2 or –NH2 moieties formed by ammonia fragmentation in the plasma. Finally, indications of an isotopic effect for hydrogen isotopes in the plasma process have been observed by comparison of ND3/h-PE results with those of NH3/d-PE. KW - ToF-SIMS KW - Hydrogen-deuterium exchange KW - Ammonia plasma treatment KW - Amine-functionalized polymer KW - Polyolefins PY - 2011 DO - https://doi.org/10.1039/c1ja10043b SN - 0267-9477 SN - 1364-5544 VL - 26 SP - 1157 EP - 1165 PB - Royal Society of Chemistry CY - London AN - OPUS4-23754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Koprinarov, Ivaylo A1 - Ghode, Archana A1 - Geng, Sh. A1 - Kühn, Gerhard T1 - Plasma-based introduction of monosort functional groups of different type and density onto polymer surfaces. Part 1: Behaviour of polymers exposed to oxygen plasma N2 - Several approaches were investigated to produce monosort functionalized polymer surfaces with a high density and homogeneity of functional groups: (i) Plasma oxidation followed by wet-chemical reduction, (ii) formation of radicals and grafting on of functional group carrying molecules, (iii) plasma bromination followed by (iv) Williamson or Gabriel-like synthesis of spacer molecules, and (v) a pulsed plasma polymerization of functional groups bearing monomers or (vi) their copolymerisation with other comonomers. The formation of hydroxyl (OH), primary amino (NH2), and carboxyl (COOH) groups was studied in detail. The oxygen plasma treatment (i) in a low-pressure non-isothermal glow discharge results in the formation of a wide variety of O functional groups, polymer degradation and crosslinking. Low power densities and short exposure times (0.1 to 2 s) are required to functionalize a surface while preserving the original polymer structure. Carbonate, ester, and aromatic groups are rapidly degraded by an oxygen plasma treatment leading to scissions of polymer backbones and loss in molecular weight. Also the formation of macrocycles and C=C bonds was observed in a region of around 4 nm in depth. The investigated polymers could be classified by their degradation behaviour on exposure to the oxygen plasma.___TAGSTART___BR___TAGEND___ In order to maximize the process selectivity for OH groups, the variety of oxygen functionalities formed by the oxygen plasma was wet-chemically reduced by diborane, vitridetrade (Na complex), and LiAlH4. Typical yields were 9 to 14 OH groups per 100 carbon atoms.___TAGSTART___BR___TAGEND___ Plasma bromination (iii) (40 Br per 100 C atoms) of polymers, followed by grafting of spacer molecules (iv), has been proved to be a highly selective reaction.___TAGSTART___BR___TAGEND___ Another way to produce high densities of monosort functionalities was the pulsed plasma polymerization of functional group bearing monomers such as allylamine, allylalcohol or acrylic acid (v). The retention of chemical structure and functional groups during plasma polymerization was achieved by using low power densities and the pulsed plasma technique. The maximum yields were 30 OH, 18 NH2, and 24 COOH groups per 100 C atoms. To vary the density of functional groups a chemical copolymerization with ''chain-extending'' comonomers such as butadiene and ethylene was initiated in the pulsed plasma (vi). Additionally, the often-observed post-plasma oxidations of such layers initiated by reaction of trapped radicals with oxygen from the air were successfully suppressed by using NO gas as radical quencher. PY - 2003 DO - https://doi.org/10.1163/156855403765826865 VL - 10 IS - 2-3 SP - 139 EP - 171 PB - North-Holland CY - New York, NY AN - OPUS4-2705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Retzko, Iris A1 - Schönhals, Andreas A1 - Unger, Wolfgang T1 - Plasma-based introduction of monosort functional groups of different type and density onto polymer surfaces. Part 2: Pulsed plasma polymerization N2 - This new functionalization method consists of the deposition of very thin plasma polymer layers (20 to 100 nm) of functional group bearing monomers in pulsed plasma. With allylalcohol, a maximum of 30 OH groups per 100 C atoms was measured with a selectivity of about 90% and a significant stability at long-time exposure to air. Allylamine was used to produce primary amino groups, with a maximum of 18 NH2 groups per 100 C atoms. Side reactions were observed during the storage in air, such as oxidation of the amino groups. Carboxylic groups could be produced using acrylic acid with a maximum concentration of 24 COOH groups per 100 C atoms. The most prominent side reaction was the decarbonylation/ decarboxylation of the acid group during plasma deposition.___TAGSTART___BR___TAGEND___ The variation of the density of functional groups using the pulsed-plasma polymerization of functional-group-bearing monomers was possible by the chemically-initiated radical copolymerization with either a chain-extending monomer, such as ethylene, or a cross linker, such as butadiene, in plasma. The density of functional groups could be adjusted continuously (0 to 30 OH, 0 to 18 NH2 and 0 to 24 COOH groups per 100 C atoms).___TAGSTART___BR___TAGEND___ The successful application of these densely functionalized polymer surfaces for producing biocompatible surfaces and for use in metal–polymer composites is proposed. KW - Pulsed plasma polymerization KW - Plasma-initiated copolymerization KW - Charcterization of homo- and copolymers PY - 2003 DO - https://doi.org/10.1163/156855403765826874 VL - 10 IS - 2-3 SP - 173 EP - 223 PB - North-Holland CY - New York, NY AN - OPUS4-2706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate A1 - Unger, Wolfgang T1 - Formation of Plasma Polymer Layers with Functional Groups of Different Type and Density at Polymer Surfaces and their Interaction with Al Atoms N2 - Monotype functionalizations with different types of functional groups (OH, NH2, COOH) on polypropylene and poly(tetrafluoroethylene) surfaces were synthesized using pulsed plasma-initiated homo- or copolymerization of functional group-carrying monomers. The maximum concentrations of functional groups were 31 OH, 18 NH2 or 24 COOH groups per 100 C atoms using allyl alcohol, allylamine or acrylic acid respectively as the monomer. The measured peel strengths of aluminium deposits increased linearly with the concentration of functional groups. Near the maximum concentration of OH (>27 OH/100 C atoms) or at moderate concentrations of COOH groups (>10 COOH/100 C atoms), constant (maximum) peel strengths were measured due to the mechanical collapse of one component in the composite (cohesive failure). Interface failures in Al-PP composites were found with COOH, NH2 and OH groups and cohesive failures were seen when higher concentrations of COOH groups were applied (>10 COOH/100 C atoms). PY - 2004 DO - https://doi.org/10.1002/ppap.200400008 SN - 1612-8850 SN - 1612-8869 VL - 1 IS - 1 SP - 28 EP - 50 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-4707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface analysis of plasma-deposited polymer films, 1: Time of Flight Static Secondary Ion Mass Spectrometry (ToF-SSIMS) of plasma polystyrene before and after exposure to ambient air N2 - Pulsed plasma-deposited polystyrene films were studied by time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) before and after exposure to ambient air. The influence of the external plasma parameters on the secondary ion mass spectra of plasma-deposited polystyrene films was investigated. From these data, information on the chemical character of the plasma polystyrene films was derived. In the range of deposition conditions applied in this study, the fragmentation of styrene is a minor process. The main process is probably the radical chain propagation to polymers. All the polystyrene plasma polymers, relying on ToF-SIMS, seem to be rather similar to a reference polystyrene oligomer sample. When the plasma polymers are exposed to air, extensive oxygen incorporation occurs. Oxygen uptake was found to alter the emission probabilities of secondary ions. A relation between the regularity of the plasma polymers and the amount of oxygen incorporation was found. The result was that the chemical regularity of the plasma polystyrene decreases when the effective power in the plasma is increased. PY - 2004 DO - https://doi.org/10.1002/ppap.200400002 SN - 1612-8850 SN - 1612-8869 VL - 1 SP - 123 EP - 133 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-4697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Lippitz, Andreas A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface Analysis of Plasma-Deposited Polymer Films, 2: Analysis of Post-Plasma Air Reacted Plasma Polymerized Styrene by X-Ray Photoelectron Spectroscopy and X-Ray Absorption Spectroscopy N2 - Chemical properties of plasma-polymerized styrene films can be effectively controlled by the appropriate choice of external plasma parameters, such as duty cycle, power and monomer pressure. Chemical properties here are the regularity of the primary structure, the amount of long living radicals and branching or cross-linking or both in plasma polymerized styrene films, which can be indirectly monitored by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Principally, XPS and NEXAFS spectra of plasma-polymerized styrene show all the spectroscopic fingerprints characteristic of atactic polystyrene indicating an inherent similarity of the respective primary chemical structures. There is an increase in irregularity and radical concentration for the plasma deposited films with increasing duty cycle or power. With an increase in monomer pressure, a decreased level of monomer fragmentation and, consequently, an increase in regularity must be concluded from the experimental data. The applied power regulates the fragmentation of the monomers as monitored by spectroscopic signals correlated to the aromatic rings. A trend in the extent of the post-plasma oxygen incorporation according to the variation of the various external plasma parameters was deduced, which agrees with earlier ToF-SIMS findings KW - Chemical characterization KW - ESCA/XPS KW - NEXAFS KW - Plasma polymerization KW - Polystyrene PY - 2004 DO - https://doi.org/10.1002/ppap.200400022 SN - 1612-8850 SN - 1612-8869 VL - 1 SP - 134 EP - 140 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-6935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface Analysis of Plasma-Deposited Polymer Films, 3: In situ Characterization of Plasma-Deposited Ethylene Films by ToF-SSIMS N2 - Pulsed-plasma-deposited ethylene films were studied by time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) before and after exposure to ambient air. The influence of the external plasma parameters on the secondary ion mass spectra of plasma-deposited ethylene films was investigated. From these data, information on the chemical character of the plasma-deposited ethylene films was derived. The investigation of the effect of external plasma parameters on the chemical character of the plasma-deposited ethylene films revealed that there were some drastic changes in the secondary ion mass spectra of the films. It was found that fragmentation and re-arrangement of the monomer molecules in the plasma, which affects the chemical character of the deposited films, vary according to the external plasma parameters. When the plasma polymers are exposed to air, extensive oxygen incorporation occurs. The oxygen uptake is high at the beginning and then it levels of. Some indications for the formation and decay of peroxy radicals (COO) and, subsequently, hydroperoxides (COOH) are found. It was observed that the oxygen uptake of the plasma deposited ethylene films increase when the plasma conditions become harder. KW - Ageing KW - Plasma polymerization KW - Polyethylene (PE) KW - ToF-SIMS PY - 2004 DO - https://doi.org/10.1002/ppap.200400025 SN - 1612-8850 SN - 1612-8869 VL - 1 SP - 141 EP - 152 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-6936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Chemical analysis of plasma-polymerized films: The application of X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (NEXAFS) and fourier transform infrared spectroscopy (FTIR) N2 - Selected FTIR, XPS and NEXAFS spectroscopy results obtained with films deposited with different plasma polymerization processes and different monomers (styrene, acetylene, ethylene and butadiene) are presented. In detail FTIR spectra, XPS surveys, XPS valence bands and core level signals including shake-up features as well as carbon K-edge absorption spectra are qualitatively and, in some cases, semi-quantitatively considered. Information on the film formation, the chemistry of the films and the film stability against air exposure are derived from spectroscopic features. With styrene chemically rather well defined plasma polymer layers can be formed with rather high deposition rates applying a pulse plasma process. Using ethylene, acetylene or butadiene as a monomer in the plasma deposition process the deposition rates are smaller. Using these monomers plasma polymer films can be obtained with a primary chemical structure which is similar to each other but more or less different from those of the respective conventional polymers. The main difference between these samples is their individual concentration of unsaturated carbon species. Finally, a technologically relevant example, i.e. a plasma deposited polymer barrier layer deposited on the inner wall of a poly(ethylene) vessel is briefly considered. KW - Plasma polymer KW - Styrene KW - Ethylene KW - Acethylene KW - Butadiene KW - XPS KW - NEXAFS KW - FTIR KW - Chemical characterization KW - Deposition process KW - Stability PY - 2001 DO - https://doi.org/10.1016/S0368-2048(01)00330-9 SN - 0368-2048 SN - 1873-2526 VL - 121 IS - 2 SP - 111 EP - 129 PB - Elsevier CY - Amsterdam AN - OPUS4-6938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Mix, Renate ED - Radusch, H.-J. ED - Fiedler, L. T1 - Plasma-initiated homo and copolymerisation for modifying polymer surfaces with funtional groups of different type and density T2 - Internationale Fachtagung Polymerwerkstoffe ; P-2002 CY - Halle (Saale), Germany DA - 2002-09-25 PY - 2002 SN - 3-86010-656-2 SP - 534 EP - 539 PB - Martin-Luther-Univ. Halle-Wittenberg CY - Halle (Saale) AN - OPUS4-6969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Unger, Wolfgang T1 - Functional groups bearing plasma homo and copolymer layers as adhesion promoters in metal-polymer composites T2 - 10. Neues Dresdner Vakuumtechnisches Kolloquium (NDVaK) CY - Dresden, Germany DA - 2002-10-17 PY - 2002 SP - 6 EP - 15 PB - DTVa CY - Dresden AN - OPUS4-6970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Gerhard A1 - Retzko, Iris A1 - Lippitz, Andreas A1 - Unger, Wolfgang A1 - Friedrich, Jörg Florian T1 - Homofunctionalized polymer surfaces formed by selective plasma processes N2 - Several possibilities exist to produce a modified polymer surface with a high density of only one sort of functional group such as: (i) the plasma grafting of unfragmented monomer molecules and their polymerization forms OH, NH2, COOH groups, etc. in concentrations of approximately 25 groups per 100 C atoms; (ii) selective plasma bromination provides 10–25 CBr groups; (iii) the plasma oxidation of polymer surfaces in an O2 plasma followed by the chemical reduction of all O-containing groups to OH groups by diborane, vitride™ (Na complex) or LiAlH4 yields 9–14 OH groups per 100 carbon atoms; and (iv) the grafting of spacers with different endgroups onto OH or CBr groups produces 7–10 spacer molecules/100 C. This work was focused on the formation of thin plasma deposited polymer layers with a maximum of (homo)functional groups and with a minimum of chemical irregularities using the pulsed plasma technique. The monomers were allylalcohol, allylamine, acrylonitrile and acrylic acid. The further intent was to study the interactions of functional groups (OH, COOH, NH2) and deposited metals (Cr, Al, Ti). It was expected that more basic (NH2), weakly basic or neutral (OH) or more acidic (COOH) groups would show different interactions and chemical reactions with metal atoms. KW - Pulsed plasma polymerization KW - Functional groups KW - Long-term stability KW - Polymer-metal composites PY - 2001 DO - https://doi.org/10.1016/S0257-8972(01)01056-8 SN - 0257-8972 VL - 142-144 SP - 494 EP - 500 PB - Elsevier Science CY - Lausanne AN - OPUS4-6971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Retzko, Iris A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Lippitz, Andreas T1 - Plasma polymers with chemically defined structures in contact with metals N2 - The retention of chemical structure and functional groups during plasma polymerization was investigated. Usually plasma polymer layers, prepared by a continuous wave radio-frequency plasma, are often chemically irregular in their structure and composition. To minimize these irregularities low wattages and the pulsed plasma technique were applied to avoid fragmentations. The first goal was to produce plasma polymers comprising double or triple bonds as precursors for electrically conducting polymers. Acetylene, ethylene, butadiene and polystyrene were used as monomers and deposited as thin polymer films by pulsed plasmas of low wattages. Styrene polymerization was strongly enhanced in the dark phase (plasma off) of a pulsed r.f. plasma caused by the reactivity of the vinyl-type double bond. This could be confirmed by a verification of a rather high chemical regularity of the film sample. The oxygen content of this film measured by X-ray photoelectron spectrometry (XPS) was in situ 0% and after 24 h exposure to air lower than 1%. Additionally, post-plasma oxidations of trapped radicals with air could be suppressed using NO gas as radical quencher. Such quenched plasma polymer layers were completely stable against oxidation for a number of weeks. During the low-wattage pulse plasma polymerization metal atoms were simultaneously or layer by layer evaporated into the growing layer and in situ measured by XPS. These metal atoms are acting as dopants. Here, Li, K, Mg and Cr were used at different concentrations providing electrical conductivity and magnetic properties for the film. KW - Pulsed plasma KW - Plasma polymerization KW - Doping with metal atoms KW - Encapsulation of nanoparticles PY - 2001 DO - https://doi.org/10.1016/S0257-8972(01)01051-9 SN - 0257-8972 VL - 142-144 SP - 460 EP - 467 PB - Elsevier Science CY - Lausanne AN - OPUS4-6972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Möller, B. A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Krüger, P. T1 - Improvement of adhesion properties of polymers by producing oxyfluorinated surfaces PY - 2001 SN - 0016-4232 VL - 92 IS - 5 SP - 1334 EP - 1444 PB - Leuze CY - Saulgau, Württ. AN - OPUS4-6973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Eine neue Generation von alterungsbeständigen Plasmapolymeren mit definierter chemischer Struktur T2 - 8. Neues Dresdner Vakuumtechnisches Kolloquium (NDVaK) CY - Dresden, Deutschland DA - 2000-10-19 PY - 2000 VL - 8 SP - 110 EP - 114 CY - Dresden AN - OPUS4-6974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Wöll, Ch. T1 - K-Edge Soft X-ray Absorption (NEXAFS) Spectroscopy In Surface Chemical Analysis of Polymers T2 - International Discussion Meeting Advanced Methods of Polymer Characterization: New Developments and Applications in Industry CY - Mainz, Germany DA - 1999-03-15 PY - 1999 SP - P3.53 CY - Mainz AN - OPUS4-6925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Weiss, K. A1 - Wöll, Ch. ED - Mittal, K. T1 - The Application of Near Edge X-ray Absorption Fine Structures (NEXAFS) Spectroscopy and X-ray Photoelectron Spectroscopy (XPS) in Surface Analysis of Chromium-evaporated Polymers and Organic Films PY - 1998 SN - 90-6764-290-8 SP - 147 EP - 168 PB - VSP CY - Utrecht AN - OPUS4-6986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koprinarov, Ivaylo A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Wöll, Ch. T1 - Oxygen plama induced degradation of the surface of poly(styrene), poly(bisphenol-A-carbonate) and poly(ethylene terephthalate) as observed by soft X-ray absorption spectroscopy (NEXAFS) KW - Oxygen DC plasma treatment KW - Plasma degradation KW - X-ray absorption spectroscopy (NEXAFS) PY - 1998 SN - 0032-3861 SN - 1873-2291 VL - 39 IS - 14 SP - 3001 EP - 3009 PB - Springer CY - Berlin AN - OPUS4-6990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Giebler, Rainer A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Reactions and Intermediates at the Metal-Polymer Interface - Detected by XPS and NEXAFS Spectroscopy T2 - 4th European Conference on Adhesion (EURADH '98) ; 1st World Congress on Adhesion and Related Phenomena (WCARP) CY - Garmisch-Partenkirchen, Germany DA - 1998-09-06 PY - 1998 SN - 0021-8464 VL - 75 IS - 1 SP - 1.60 EP - 1.62 PB - Gordon & Breach CY - New York, NY AN - OPUS4-6991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koprinarov, Ivaylo A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Wöll, Ch. T1 - Surface analysis of DC oxygen plasma treated or chromium evaporated poly(ethylene terephthalate) foils by soft X-ray absorption spectroscopy (NEXAFS) KW - Biaxially streched poly(ehtylene terephthalate) KW - Oxygen DC plasma treatment KW - Metallization with chromium PY - 1997 SN - 0032-3861 SN - 1873-2291 VL - 38 IS - 8 SP - 2005 EP - 2010 PB - Springer CY - Berlin AN - OPUS4-6998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. T1 - Corona, spark and combined UV and ozone modification of polymer films WeBP23 N2 - Different types of plasma, irradiative and chemical activation were compared in terms of surface functionalization. Corona and spark jet plasmas are characterized by low gas temperatures and high rates in surface modification. UV irradiation in the presence of ozone does not involve any particle bombardment and acts only by enhanced photooxidative processes. Although ion implantation can be avoided, this method is not free of radiative damage in both the surface-near region and the bulk of polymers. Furthermore, its functionalization rate is low. In relation to low-pressure O2 plasma modification, all treatments mentioned here have a low efficiency in adhesion promotion due to oxidative degradation of macromolecules and formation of molecular debris known as the ''weak boundary layer''. PY - 1998 DO - https://doi.org/10.1016/S0257-8972(97)00318-6 SN - 0257-8972 VL - 98 IS - 1 SP - 879 EP - 885 PB - Elsevier Science CY - Lausanne AN - OPUS4-7000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Oberflächenvorbehandlung von Polypropylen in elektrischen Entladungen PY - 1995 SN - 0590-8450 VL - 1 SP - 123 EP - 127 PB - Verl. Coating Thomas CY - St. Gallen AN - OPUS4-7005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. ED - Mittal, K. L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate T2 - International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Las Vegas, NV, USA DA - 1993-11-03 KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1996 SN - 90-6764-201-0 VL - 1 SP - 121 EP - 136 PB - VSP CY - Utrecht AN - OPUS4-7006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. ED - Mittal, K. L. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1996 SN - 90-6764-201-0 SP - 49 EP - 72 PB - VSP CY - Utrecht AN - OPUS4-7007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian T1 - Plasmabehandelte Polymere charakterisieren PY - 1995 SN - 0025-5300 VL - 37 IS - 6 SP - 233 EP - 237 PB - Carl Hanser Verlag CY - München AN - OPUS4-7009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1995 SN - 0169-4243 SN - 1568-5616 VL - 9 IS - 5 SP - 575 EP - 598 PB - VNU Science Press CY - Utrecht AN - OPUS4-7010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Geng, Sh. A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Neue Erkenntnisse zur Plasmamodifizierung von Polymeroberflächen PY - 1995 SN - 0949-8214 VL - 1 SP - 36 EP - 42 PB - Technische Fachhochschule CY - Wildau AN - OPUS4-7011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas T1 - Plasma Modification of Polymer Surfaces PY - 1995 SN - 1022-1360 SN - 0258-0322 SN - 1521-3900 VL - 100 SP - 111 EP - 115 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-7012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. A1 - Erdmann, J. A1 - Gorsler, H.-V. A1 - Nick, L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1995 SN - 0169-4243 SN - 1568-5616 VL - 9 IS - 9 SP - 1165 EP - 1180 PB - VNU Science Press CY - Utrecht AN - OPUS4-7013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang ED - Olefjord, I. ED - Nyborg, L. ED - Briggs, D. T1 - X-ray Absorption Spectroscopy (NEXAFS) of PET Surfaces T2 - 7th European Conference on Applications of Surface and Interface Analysis CY - Göteborg, Sweden DA - 1997-06-16 PY - 1997 SN - 0-471-97827-2 SP - 755 EP - 759 PB - Wiley CY - Chichester AN - OPUS4-7288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -