TY - CONF A1 - Wilsch, Gerd T1 - Quality control of hydrophobic coatings with an integrated marker element by laser-induced breakdown spectroscopy (LIBS) T2 - Concrete Solutions 2011, 4th International Conference on Concrete Repair CY - Dresden, Germany DA - 2011-09-26 PY - 2011 AN - OPUS4-25105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bienert, K. A1 - Schalk, H. A1 - Molkenthin, A. A1 - Wilsch, Gerd A1 - Goldschmidt, Sebastian A1 - Niederleithinger, Ernst T1 - Qualitätskontrolle von Hydrophobierungen mit einem integrierten Markerelement durch die laser-induced breakdown spectroscopy (LIBS) N2 - Stahlbetonbauwerke sind nutzungsbedingt Umwelteinwirkungen ausgesetzt, die zu Schäden an der Konstruktion führen können. Dabei ist in erster Linie die Einwirkung von tausalzhaltigen Wässern im Winter zu nennen, die durch den Beton kapillär und über Diffusionsvorgänge aufgenommen werden. Dies fuhrt durch den Chlorideinfluss langfristig zur Korrosion der Bewehrung. Zudem leidet die Frost-Taubeständigkeit durch das Herabsetzen der Gefrierpunkttemperatur im Porenwasser. Die Folge sind Abwitterungen an der Betonoberfläche. Die meisten zerstörenden Prozesse werden durch einen Feuchtigkeitstransport ausgelöst, der lösliche Substanzen beinhaltet. Hydrophobierungen können zur Vorbeugung von solchen Schäden verwendet werden aber es gibt bisher keine Methoden zur Qualitätssicherung vor-Ort. Eine Möglichkeit der Qualitätssicherung ist, eine markierende Substanz in, die Tiefenhydrophobierung zu integrieren, die durch spektroskopische Methoden detektiert werden kann. Unterschiedliche Arten von Markerelementen wurden hierfür getestet Es konnte gezeigt werden, dass Übergangsmetalle am besten als Marker geeignet sind. Derzeit wird ein mobiles LIBS - System für die Messung der Eindringtiefe und zu hoch aufgelösten Darstellung der Wirkstoffverteilung in der Betonrandzone entwickelt. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 KW - Hydrophobierung KW - Markerelement KW - Qualitätskontrolle KW - Eindringtiefe KW - Betonreparatur KW - Lochfraßkorrosion KW - Chloride KW - Frost-Tausalz-Wechsel KW - LIBS PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-0398 EP - 2-0409 AN - OPUS4-27601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Wiggenhauser, Herbert A1 - Helmerich, Rosemarie A1 - Krause, Martin A1 - Mielentz, Frank A1 - Niederleithinger, Ernst A1 - Taffe, Alexander A1 - Wilsch, Gerd ED - Naus, D. T1 - Non-destructive Testing of Nuclear Power Plant Concrete Structures State of the Art Report N2 - Nuclear Power Plants have been in operation for ca. 50 years. Based on this experience, non-destructive testing tasks specific to thick and highly reinforced nuclear containment structures have materialized. The performance based Service life extension of existing NPPs also needs a measurement based decision to support continuing the service of the concrete part of the installations. By nature, concrete is a very durable material and any natural Deterioration processes may take a long time to become critical to the structure. The experience of more than 50 years of service limits the testing tasks to a few ones which are not yet solved. Research in NDT of concrete structures is performed by many research institutions all over the world with different technical and systematic approaches. Results are mainly obtained on laboratory specimens, sometimes additional field studies are reported. This research takes place independently without coordination and as a result, the outcomes mostly lack full comparability. Software for data analysis has become indispensable and very powerful. This part of testing needs more attention when it comes to evaluate test results. Validation of NDE solutions is becoming a critical part in concrete structure testing. Validation is by definition the proof that a customer´s requirements in the test are being met by the testing solution. This includes equipment, personnel qualification and data analysis. In the following tables, the research recommendation Validation is used in the sense, that proof of the performance of existing solutions needs to be adressed. In general, a validation methodology for NDE solutions for concrete testing in itself needs to be researched and established. Comparability of research also needs an accepted and easily accessible reference. From experience, it is almost impossible to manufacture exact copies of test specimens at different locations. Round Robin tests are therefore needed to evaluate the performance of a test. Data evaluation is generally done using dedicated software, sometimes Hardware dependant and not interchangeable between systems. Software is ever more increasingly becoming more powerful and sophisticated. An in-depth evaluation needs to address the comparability and validation of Software used for data analysis and evaluation. The vision of a unified software pool for NDE investigations would undoubtedly support research tremendously. Quantitative NDE is mostly recommended to assess the condition of a structure. However, qualitative data can be very useful, especially for processes which change the material properties or deteriorate the structure (e.g. corrosion of reinforcement). The need for reliable baseline data is a key factor for such monitoring tasks. KW - Nuclear structures KW - Non-destructive testing KW - State of the art KW - Research needs PY - 2013 SP - 1 EP - 120 PB - BAM CY - Berlin AN - OPUS4-51049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd T1 - Quality Control of Hydrophobic Coatings with an Integrated Marker Element by laser Induced Breakdown Spectroscopy (LIBS) T2 - 2nd International Conference on Microstructural-related Durability of Cementitious Composites CY - Amsterdam, Netherlands DA - 2012-04-11 PY - 2012 AN - OPUS4-27412 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd A1 - Schalk, H. A1 - Bienert, K. A1 - Molkenthin, A. A1 - Goldschmidt, Sebastian A1 - Niederleithinger, Ernst T1 - Quality control of hydrophobic coatings with an integrated marker element by laser-induced breakdown spectroscopy (LIBS) N2 - Reinforced concrete structures are affected by damage, caused e.g., by freeze-thaw effects or corrosion. Most damage processes are triggered by moisture transport including soluble substances. Hydrophobic coatings can be used for prevention of such damage, but quantitative on-site quality assurance methods are so far missing. A way to overcome this problem is to integrate marker substances into the coating, which can be detected by spectroscopic methods. Different types of marker elements have been tested. It can be shown that transition metals are best suited for the task. Currently a LIBS (Laser Induces Breakdown Spectroscopy) system is developed for the measurement of penetration depth and content of the hydrophobic coating via the marker element in the peripheral zone of concrete. T2 - 2nd International conference Micro Durability - Microstructural-related durability of cementitious composites CY - Amsterdam, The Netherlands DA - 11.04.2012 KW - Hydrophobierung KW - Laser Induced Breakdown Spektroskopie (LIBS) KW - Qualitätskontrolle PY - 2012 SN - 978-2-35158-129-2 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings VL - PRO83 SP - 1 EP - 10 AN - OPUS4-27534 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd A1 - Schaurich, Dieter ED - Forde, M.C. T1 - Laser induced breakdown spectroscopy for fast analysis of ingress profiles of ions on concrete N2 - An increasing number ofreinforced concrete structures, mainly in transportation infrastructure, sujfer from deterioration, e.g.freeze-thaw effects or corrosion. Deicing salts, which have been intensively used in the last decades, cause pitting corrosion on reinforcement due to penetration of Chloride ions. The penetration ofalkaline ions may also influence the alkali silica reaction (ASR) ofhighway structures. A comparatively new method for the application at building materials, laser-induced breakdown spectroscopy (L1BS), was used to determine element distributions and ingress profiles ofions on concrete specimens. With this method it is possible to measure directly on an optical accessible surface ofa specimen. The time neededfor sample preparation and measurement is low. With LIBS repeatable automated measurements on a large number of specimens can be carried out. The presented results show that the heterogeneity ofthe material is taken into Account and thus the errors due to the sampling is minimized. A mobile setup for on-site element analysis is presented. The paper describes the results measured on concrete samples obtainedfrom parking decks and cores taken from highways. A comparison with Standard Chemical analysis will be presented. T2 - Structural faults & repair 2012 - 14th International conference and exhibition CY - Edinburgh, Scotland DA - 03.07.2012 KW - Laser Induced Breakdown Spectroscopy (LIBS) KW - Chloride KW - Sulphate KW - Alkali metals KW - Damage KW - Non-destructive testing KW - Concrete KW - On-site PY - 2012 SN - 0-947664-71-7 SP - 1 EP - 8 PB - Engineering Technics Press AN - OPUS4-27535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd A1 - Schaurich, Dieter A1 - Wiggenhauser, Herbert ED - Leeman, C.M. T1 - Laser-induced breakdown spectroscopy for fast analysis of ingress profiles of ions on concrete N2 - An increasing number of reinforced concrete structures, often components of transportation infrastructure, suffer from deterioration, e. g. freeze-thaw effects or corrosion. De-icing salts, which have beenintensively used in the last decades, may cause pitting corrosion at the reinforcement following the Penetration of chloride ions. The penetration of alkaline ions may also influence the alkali silica reaction (ASR) of highway structures. For the application at building materials a relatively new method, the laser induced breakdown spectroscopy (LIBS), was used to determine element distributions and ingress profiles of ions on concretespecimens. LIBS is a testing method which complements the Standard Chemical methods. It is able to measure directly on an optical accessible surface of a specimen. The time needed for sample preparation and measurement is low. The described setup allows repeatable automated measurements at a high number of specimens. The results presented here, show how the heterogeneity of the material can be qualified and how the errors caused by the sampling procedure can be minimised. A mobile setup is available for on site element analysis. Following the results taken at laboratory samples, concrete samples obtained from parking decks and cores taken at highways are presented. The distribution of the characteristic ions and/or the Ingress characteristic of damaging substances are determined. T2 - NDE/NDT for highways and bridges - Structural materials technology -SMT- CY - New York City, NY, USA DA - 21.08.2012 KW - Beton KW - Laser Induced Breakdown Spektroskopie PY - 2012 SN - 978-1-57117-235-8 SP - 384 EP - 391 AN - OPUS4-27528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ebell, Gino A1 - Burkert, Andreas A1 - Günther, Tobias A1 - Wilsch, Gerd T1 - Untersuchungen zum korrosionsauslösenden Chloridgehalt an nicht rostendem ferritischem Betonstahl in Mörtel N2 - Der maßgebliche Korrosionsschutz von nicht rostendem Stahl in Beton basiert, anders als bei unlegiertem Betonstahl, auf der Ausbildung einer Chromoxidschicht. Die Chromoxidschicht ist in alkalischem und in carbonatisiertem Beton beständig, sodass nicht rostende Stähle in einem passiven Zustand vorliegen. Die Initiierung von Lochkorrosionserscheinungen ist dagegen auch an nicht rostenden Stählen in Beton möglich. Der korrosionsauslösende Chloridgehalt ist neben dem Gehalt an Legierungselementen (insbesondere dem Chromgehalt) und der Oberflächenbeschaffenheit auch vom Konzentrationsverhältnis von OH“ zu CI“ im Elektrolyten abhängig. Daher ist prinzipiell zu erwarten, dass in karbonatisierten Betonen geringere Chloridgehalte Korrosion initiieren können als in Betonen mit höheren pH-Werten. Dies gilt in besonderem Maße für nicht rostende Betonstähle mit geringen Chromgehalten, wie z. B. Produkte aus dem Werkstoff 1.4003 (X2CrNi12) mit seiner im Vergleich zu den Standardausteniten geringen Beständigkeit. Um den kritischen korrosionsauslösenden Chloridgehalt am Beispiel eines am Markt verfügbaren ferritischen Chromstahls zu bestimmen, wurden an der Bundesanstalt für Materialforschung und -prüfung (BAM) umfangreiche Untersuchungen zu beschleunigten Korrosionsversuchen in alkalischen und karbonatisierten Mörteln durchgeführt. Mittels Laser-induced Breakdown Spectroscopy (LIBS) konnten die korrosionsauslösenden Chloridgehalte im Phasengrenzbereich Betonstahl-Mörtel ermittelt werden. KW - Korrosion KW - Betonstahl KW - Nicht rostender KW - LIBS KW - Chloridgehalt KW - Kritischer PY - 2020 DO - https://doi.org/10.1002/bate.201900077 SN - 0932-8351 VL - 97 IS - 1 SP - 21 EP - 31 PB - Ernst & Sohn CY - Berlin AN - OPUS4-50247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarz, W. A1 - Wilsch, Gerd A1 - Katsumi, N. A1 - Ebell, Gino A1 - Völker, Tobias T1 - Ion distribution in concrete overlay, mapped by laser induced breakdown spectroscopy (LIBS), modified by an embedded zinc anode N2 - Galvanic corrosion protection by embedded zinc anodes is an accepted technique for the corrosion protection of reinforcing steel in concrete. Galvanic currents flow between the zinc anode and the steel reinforcement due to the potential difference that is in the range of a few hundred mV. The ion distribution was studied on two steel reinforced concrete specimens admixed with 3 wt.% chloride/wt. cement and galvanically protected by a surface applied EZ-anode. On both specimens, a zinc anode was embedded and glued to the concrete surface by a geo-polymer-based chloride-free binder. At one specimen, the EZ-anode was operated for 2,5 years, the EZ-anode at the other specimen was not electrically connected to the reinforcement, this specimen serves as a reference. Both specimens have been stored under identical conditions. The ion distribution between the anode (EZ-ANODE) and cathode (steel reinforcement) was studied by laser-induced breakdown spectroscopy (LIBS) after 7 months, 12 months, and 2,5 years. Results of the LIBS studies on the specimen with activated EZ-anode after 7 months, 12 months, and 2,5 years and of the reference specimen after 2,5 years are reported. Results show that diffusion of ions contributes to the changes in the ion distribution but migration, especially of chlorides towards the EZ-anode is significant despite the weak electric field – several hundred millivolts - generated by the galvanic current. Results show that chloride ions accumulate near the zinc-anode as in water-insoluble zinc-hydroxy chlorides - Simonkollite. T2 - ICCRRR 2022 CY - Capetown, South Africa KW - Corrosion KW - LIBS KW - Zinc KW - Anode PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560576 DO - https://doi.org/10.1051/matecconf/202236404023 SN - 2261-236X VL - 364 SP - 1 EP - 7 PB - EDP Sciences CY - Les Ulis AN - OPUS4-56057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dalichow, Dirk A1 - Blaschke, Jil A1 - Wilsch, Gerd A1 - Völker, Tobias T1 - Revolutionizing Concrete Analysis and Maintenance with Laser-Induced Breakdown Spectroscopy N2 - Laser-induced breakdown spectroscopy (LIBS) is a valuable complement to established methods for the chemical analysis of concrete. Compared to conventional techniques, LIBS enables spatially resolved imaging of harmful ion distributions within the cementitious matrix. It allows the simultaneous detection of all relevant ions and degradation mechanisms, facilitating a better understanding of interacting processes. The benefits of multi-element analysis are illustrated through selected examples that highlight the method’s superior information content. Ion penetration profiles are recorded at a resolution of 0.25 mm, providing high-quality input data for service life modelling. Instead of drill dust, a 50 mm core sample is used. The measurement is automated, requires no chemical reagents or elaborate sample preparation, and is completed within minutes. KW - LIBS KW - Durability KW - Ion transport profiling KW - Concrete analysis KW - Service life assessment PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642846 DO - https://doi.org/10.58286/31656 SN - 1435-4934 VL - 30 IS - 10 SP - 1 EP - 8 PB - NDT.net GmbH & Co. KG AN - OPUS4-64284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Feldmann, Ines A1 - Günther, Tobias A1 - Wilsch, Gerd ED - Glaser, L. T1 - Analytische Untersuchungen an Glasmalfarben mittels EDX und LIBS N2 - Nach 1850 wurde zur weiteren Herabsetzung der Einbrenntemperatur von Glasmalfarben Borax (Na2B4O7 · 10 H2O) zugesetzt. Das Verhältnis war nun 1 Teil SiO2, 3 Teile PbO und 0,5 Teile Borax. Der analytische Nachweis von Bor in eingebrannten Malschichten war bisher jedoch nicht möglich.Daher wurden in Laborversuchen Glasmalfarben mit unterschiedlichem Gehalt an Borax auf Modellgläser aufgetragen, eingebrannt und anschließend unter simulierten Umweltbedingungen zeitraffend im Klimaschrank bewittert. Mit Hilfe von elektronenmikroskopischen Untersuchungen können Malschichten charakterisiert werden und somit Hinweise auf mögliche Schadensursachen liefern. Erste Versuche zum Nachweis von Bor erfolgten mit Hilfe von LIBS-Messungen (Laser Induced Breakdown Spectroscopy) an im Labor hergestellten Glasmalfarben mit unterschiedlichem Boraxgehalt. T2 - Archäometrie und Denkmalpflege 2018 CY - Hamburg, Germany DA - 20.03.2018 KW - Glasmalfarben KW - Umweltsimulation KW - Analytik PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-450664 SN - 978-3-945931-16-5 DO - https://doi.org/10.3204/DESY-PROC-2018-01 SN - 1435-8077 SP - 283 EP - 285 PB - Deutsches Elektronen -Synchrotron CY - Hamburg AN - OPUS4-45066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gottlieb, Cassian A1 - Gojani, Ardian A1 - Völker, Tobias A1 - Günther, Tobias A1 - Gornushkin, Igor B. A1 - Wilsch, Gerd A1 - Günster, Jens T1 - Investigation of grain sizes in cement-based materials and their influence on laser-induced plasmas by shadowgraphy and plasma imaging N2 - The effect of particle grain sizes in different cement-based mixtures on the laser-induced plasma evolution is studied using two experimental methods: (i) temporal and spatial evolution of the laser-induced shock wave is investigated using shadowgraphy and two-dimensional plasma imaging, and (ii) temporal and spatial distribution of elements in the plasma is investigated using two-dimensional spectral imaging. This study is motivated by the interest in applying laser-induced breakdown spectroscopy (LIBS) for chemical analysis of concrete, and subsequently obtain information related to damage assessment of structures like bridges and parking decks. The distribution of grain sizes is of major interest in civil engineering as for making concrete different aggregate grain sizes defined by a sieving curve (64mm to 0.125 mm) are needed. Aggregates up to a size of 180 μm can be excluded from the data set, therefore only the amount of small aggregates with a grain size below 180 μm must be considered with LIBS. All components of the concrete with a grain size smaller than 0.125mm are related to the flour grain content. Tested samples consisted of dry and hardened cement paste (water-cement ratio w/z=0.5), which served as a reference. Aggregate mixtures were made by adding flour grains (size 40 μm) and silica fume (size 0.1 μm) in different ratios to cement: 10%, 30%, 50% and 60%, all combined to the remaining percentage of dry or hydrated cement. The visualization results show that a dependance in the evolution of the plasma as a function of sample grain size can be detected only in the initial stages of the plasma formation, that is, at the initial 3 μs of the plasma life. Spectral information reveals the elemental distribution of the silicon and calcium in plasma, in both neutral and ionized form. Here also, a significant effect is observed in the first 1 μs of the plasma lifetime. KW - LIBS KW - Cement-based materials KW - Particle size KW - Shadowgraphy KW - Plasma imaging PY - 2020 DO - https://doi.org/10.1016/j.sab.2020.105772 VL - 165 SP - 105772 PB - Elsevier B.V. AN - OPUS4-50319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Völker, Tobias A1 - Blaschke, Jil A1 - Lierenfeld, Matthias A1 - Wilsch, Gerd A1 - Dalichow, Dirk A1 - Truffer, Philipp A1 - Kruschwitz, Sabine T1 - Aktuelle Anwendungsbeispiele der laserinduzierten Plasmaspektroskopie in der Bauwerksdiagnostik N2 - Die Zustandsbewertung und Instandhaltung von Betonbauwerken erfordert zuverlässige und effiziente Analysemethoden, um komplexe Schadensmechanismen frühzeitig erkennen und fundiert bewerten zu können. Klassische chemisch-analytische Verfahren in der Betonanalytik liefern zwar präzise Ergebnisse bezogen auf die Probenmasse, sind jedoch mit erheblichem Laboraufwand verbunden, in ihrer räumlichen Auflösung durch die Probenahme begrenzt und hinsichtlich der Ergebnisinterpretation mit Unsicherheiten behaftet. Die laserinduzierte Plasmaspektroskopie (LIBS) bietet hier ein hohes Potenzial als schnelle, bildgebende und weitgehend zerstörungsarme Alternative. In den vergangenen Jahren hat sich das Verfahren zunehmend in der Bauwerksdiagnostik etabliert und wird heute für ein breites Spektrum an Anwendungen eingesetzt. Der vorliegende Beitrag gibt einen Überblick über den aktuellen Stand der LIBS-Anwendungen und zeigt anhand ausgewählter Praxisbeispiele die Leistungsfähigkeit, den Mehrwert, die Grenzen und die zukünftigen Entwicklungsperspektiven des Verfahrens auf. KW - LIBS KW - Spektroskopie KW - Chemische Analyse KW - Infrastruktur KW - Bauwerksdiagnostik PY - 2026 DO - https://doi.org/10.1002/best.70078 SN - 1437-1006 SP - 1 EP - 13 AN - OPUS4-65445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gottlieb, C. A1 - Lierenfeld, M. B. A1 - Wilsch, Gerd A1 - Bohling, C. T1 - Es geht auch einfacher N2 - Mit laserbasiertem Verfahren Zustand von Betonbauwerken erfassen: Die Laserinduzierte Breakdown Spektroskopie (LIBS) stellt eine Alternative zur nasschemischen Analyse dar, um den Zustand von Betonbauwerken zu erfassen. Bei diesem Verfahren laufen der Analysevorgang und die Auswertung automatisiert ab. Ein Prototyp für die mobile Anwendung auf der Baustelle steht zur Verfügung. So kann auf Knopfdruck ein schriftlicher Bericht erstellt werden, der einen genauen Wert für die Eindringtiefe eines relevanten Elements wie Chlorid ausgibt. KW - Beton KW - LIBS KW - Chlorid KW - Vor-Ort-Untersuchung PY - 2019 VL - 42 IS - 7 SP - 28 EP - 31 PB - Verlagsgesellschaft Rudolf Müller GmbH CY - Köln AN - OPUS4-50283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schwarz, W. A1 - Wilsch, Gerd A1 - Pichelhöfer, A. A1 - Ebell, Gino A1 - Völker, Tobias T1 - Galvanic chloride extraction by an embedded zinc anode: Ion distribution mapped by laser induced breakdown spectroscopy (LIBS) N2 - An important aspect with regard to the service life of zinc based galvanic anodes and the durability of the corrosion protection of steel in concrete is the “galvanic chloride extraction”. Chloride ions move in the electric field generated by the current, flowing between the galvanic anode and the cathodic steel. Migration leads to an accumulation of anions, e.g. chloride ions, at the anode and depletion of chlorides near the steel rebar surface. The ion migration was studied on steel reinforced concrete specimens admixed with 3 wt.% chloride/wt. cement and galvanically protected by a surface applied embedded zinc anode (EZA). The zinc anode was embedded and glued to the concrete surface by a geo-polymer based chloride free binder. The EZA was operated over a period of 1 year and the ion distribution between anode (EZA) and cathode (steel reinforcement) was studied by laser induced breakdown spectroscopy (LIBS) after 5 months, 7 months and 12 months. The results show that chloride ions efficiently migrate in the direction of the zinc-anode and accumulate there. Chloride distribution in the EZA correlates with the distribution of zinc ions generated by the anodic dissolution of the zinc anode in the binder matrix. The microstructure of the binder matrix and its interface to the zinc-anode are studied by REM/EDX – preliminary results will be reported. T2 - Concrete Solutions 2019 CY - Cluj Napoca, Romania DA - 30.09.2019 KW - Galvanic corrosion KW - Corrosion KW - Chloride extraction PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-488189 DO - https://doi.org/10.1051/matecconf/201928903010 VL - 289 SP - 03010, 1 EP - 5 PB - MATEC Web of Conferences AN - OPUS4-48818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd A1 - Günther, Tobias A1 - Völker, Tobias T1 - LIBS – Betonanalytik mit dem Laser N2 - Es wird ein alternatives Verfahren zur schnellen zweidimensionalen Analyse der chemischen Zusammensetzung von Baustoffen vorgestellt. Dieses beruht auf der Kombination des Abtrags einer geringen Materialmenge durch einen gepulsten Laser, der Plasmaerzeugung und der Analyse der Lichtemission des Plasmas mittels optischer Spektroskopie. Es können prinzipiell alle Elemente gleichzeitig nachgewiesen werden. Damit ist es möglich einerseits Informationen über den Baustoff an sich als auch über den Eintrag potentiell schädigender Elemente (z. B. Cl, C, Na, K, S) zu gewinnen. Das Verfahren kann automatisiert im Labor oder als mobile Version direkt vor Ort eingesetzt werden. Es liefert zweidimensionale Bilder der Elementverteilung in Echtzeit. Es kann ohne große Probenvorbereitung z. B. direkt an der Querschnittsfläche eines Bohrkernes gemessen werden. Die Messung dauert nur wenige Minuten. Das Prinzip der Messung, die Vor- und die Nachteile, sowie die verfügbare Gerätetechnik für den Einsatz im Labor oder direkt am Bauwerk werden vorgestellt. Abschließend werden praktische Beispiele für die Anwendung des LIBS-Verfahrens zur Erfassung des Chlorid-Eintrages, der Karbonatisierung und der Verteilung von Schwefel präsentiert. T2 - 9. Betonfachtagung CY - Berlin, Germany DA - 12.11.2019 KW - Chloride KW - Beton KW - LIBS KW - Schädigung PY - 2019 SP - 1 PB - InformationsZentrum Beton GmbH CY - Berlin AN - OPUS4-51675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd T1 - Fast quantitave chemical analysis of concrete using LIBS N2 - Overview of application of LIBS for the fast and automated quantitative chemical analysis of concrete. T2 - NDT-E Workshop CY - Berlin, Germany DA - 12.06.2019 KW - Sulphate KW - LIBS KW - Concrete KW - Damage KW - Chloride KW - Mapping PY - 2019 AN - OPUS4-51704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd T1 - LIBS – Betonanalytik mir dem Laser N2 - Es wird ein alternatives Verfahren zur schnellen zweidimensionalen Analyse der chemischen Zusammensetzung von Baustoffen vorgestellt. Dieses beruht auf der Kombination des Abtrags einer geringen Materialmenge durch einen gepulsten Laser, der Plasmaerzeugung und der Analyse der Lichtemission des Plasmas mittels optischer Spektroskopie. Es können prinzipiell alle Elemente gleichzeitig nachgewiesen werden. Damit ist es möglich einerseits Informationen über den Baustoff an sich als auch über den Eintrag potentiell schädigender Elemente (z. B. Cl, C, Na, K, S) zu gewinnen. Das Verfahren kann automatisiert im Labor oder als mobile Version direkt vor Ort eingesetzt werden. Es liefert zweidimensionale Bilder der Elementverteilung in Echtzeit. Es kann ohne große Probenvorbereitung z. B. direkt an der Querschnittsfläche eines Bohrkernes gemessen werden. Die Messung dauert nur wenige Minuten. Das Prinzip der Messung, die Vor- und die Nachteile, sowie die verfügbare Gerätetechnik für den Einsatz im Labor oder direkt am Bauwerk werden vorgestellt. Abschließend werden praktische Beispiele für die Anwendung des LIBS-Verfahrens zur Erfassung des Chlorid-Eintrages, der Karbonatisierung und der Verteilung von Schwefel präsentiert. T2 - 9. Betonfachtagung CY - Berlin, Germany DA - 12.11.2019 KW - Chloride KW - Beton KW - LIBS KW - Schädigung PY - 2019 AN - OPUS4-51673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd T1 - Laser-Induced Breakdown Spectroscopy (LIBS) Automated 2D chemical analysis of chloride content in concrete structures N2 - The application of a LIBS system is presented. A diode-pumped low energy laser (3 mJ, 1.5 ns, 100 Hz) and a compact NIR spectrometer are used. A scanner allows the two-dimensional element mapping. For the quantitative analysis calibration of the system is carried out with reference samples in a concentration range of chlorine of 0.05 wt.% to 2.5 wt.%. To determine the 2D distribution of harmful elements (Cl, C), concrete cores were drilled, split and analyzed directly. By comparing the chloride ingress and the carbonation, the interaction of both processes can be visualized in one measurement that takes less than 10 minutes with a drill core of 50 mm x 100 mm. Results obtained were compared and verified with standard measurements. T2 - Concrete Solutions 2019 CY - Cluj Napoca, Romania DA - 30.09.2019 KW - Chloride KW - Beton KW - LIBS KW - Schädigung PY - 2019 AN - OPUS4-51703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilsch, Gerd T1 - Mobile LIBS-System for condition assesment of concrete structures on-site N2 - Application of a mobile LIBS system for on-site investigation of chemical composition of concrete. T2 - SMAR 2019 CY - Potsdam, Germany DA - 27.08.2019 KW - Mobile system KW - LIBS KW - Concrete KW - Damage KW - Chloride KW - Sulphate KW - Mapping PY - 2019 AN - OPUS4-51706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Millar, Steven A1 - Kruschwitz, Sabine A1 - Wilsch, Gerd T1 - Determination of total chloride content in cement pastes with laser-induced breakdown spectroscopy (LIBS) N2 - The presented work discusses the accuracy of Laser Induced Breakdown Spectroscopy (LIBS) in determining the total chloride content in cement pastes. LIBS as an emission spectroscopy method is used to detect simultaneously several elements present in cement-based materials. By scanning surfaces the variability in the spatial distribution of elements can be visualised. However, for a quantification of the results, studies are necessary to characterise possible influences due to the wide variation of the chemical compositions in which cement can occur. It is shown how the calibration can be done, how the calibration samples were produced, and which statistical parameters are necessary to describe the precision of the regression. The performance of LIBS is estimated by detecting chloride in validation samples. Therefore, 55 samples and 7 ets with changing mix ompositions were produced. The presented study deals with possible influences of different mix compositions, ncluding different cations of chloride, varying w/c-ratios and the artial replacement of Portland cement with last furnace slag (50% BFS) and limestone (30% LS). Comparing the LIBS results with otentiometric titration, n accuracy of±0.05 wt%/total has been determined. KW - Spectroscopy KW - LIBS KW - Chloride KW - Quantification KW - Cement PY - 2019 DO - https://doi.org/10.1016/j.cemconres.2018.12.001 SN - 0008-8846 VL - 117 IS - March SP - 16 EP - 22 PB - Elsevier CY - Amsterdam AN - OPUS4-47059 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -