TY - GEN A1 - Stephan, H. A1 - Gloe, K. A1 - Kraus, Werner A1 - Spies, H. A1 - Johannsen, B. A1 - Wichmann, K. A1 - Reck, Günter A1 - Chand, D. K. A1 - Bharadwaj, P. K. A1 - Müller, U. A1 - Müller, W. M. A1 - Vögtle, F. ED - Moyer, B. A. T1 - Binding and extraction of pertechnetate and perrhenate by azacages T2 - Symposium Fundamentals and Applications of Anion Separations ; American Chemical Society national meeting CY - Chicago, IL, USA DA - 2001-08-25 PY - 2004 SN - 0-306-47911-7 SP - 151 EP - 168 PB - Kluwer Acad./Plenum Publ. CY - New York, NY AN - OPUS4-3667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Müller, Werner T1 - Mineralogische und chemisch-physikalische Auswirkungen der Permeation von Kohlenwasserstoffen in Kombinationsdichtungen und -dichtwänden N2 - Zur Sicherung von Deponien und Altlasten mit dem Ziel eines langfristig wirksamen Grundwasserschutzes werden seit Mitte der 80er Jahre Kombinationsdichtungen (Verbund aus Kunststoffdichtungsbahn und mineralischen Dichtschichten) eingesetzt. Um deren Langzeitbeständigkeit auch unter extremen Bedingungen bewerten zu können, wurden Permeationsmesszellen, welche die Verhältnisse in der Deponie nachstellen und über einen Zeitraum von 12 Jahren mit einem Mehrkomponentengemisch konzentrierter organischer Verbindungen beaufschlagt worden waren, zerlegt und die Auswirkungen der Schadstoffpermeation auf die Abdichtungsmaterialien untersucht. Schwerpunkte der hier vorgestellten Arbeiten waren Untersuchungen: - zur Auswirkung der Permeation des Gemisches an organischen Verbindungen auf die Eigenschaften der Kunststoffdichtungsbahn, - zur vertikalen Verteilung der organischen Verbindungen in den mineralischen Dichtungen, - zu Veränderungen mineralogischer, mikromorphologischer und bodenmechanischer Eigenschaften der mineralischen Dichtungsmaterialien, - zu mikrobiellen Aktivitäten in den mineralischen Dichtungen. Daneben wurden Stofftransportparameter bestimmt und eine Modellierung des Stofftransportes durchgeführt. Die verschiedenen untersuchten Materialien der Kombinationsdichtungen erwiesen sich unter den extremen Bedingungen als ein stabiles und effizientes Abdichtungssystem. T3 - BAM Forschungsberichtreihe - 251 PY - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1991 SN - 978-3-89701-731-8 SN - 0938-5533 VL - 251 SP - 1 EP - 198 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Jakob, Ines ED - Cancelli, A. T1 - Comparison of oxidation stability of various geosynthetics T2 - 2nd European Geosynthetics Conference ; 2nd EuroGeo 2000 CY - Bologna, Italy DA - 2000-10-15 KW - Oxidation KW - Durability KW - Geomembrane KW - Geotextiles KW - Testing PY - 2000 SN - 88-555-2560-3 VL - 1 SP - 449 EP - 455 PB - Pàtron CY - Bologna AN - OPUS4-901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Kunststoff-Dränmatten im Deponiebau - Teil 1: Eigenschaften und Beurteilung PY - 2002 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 79 IS - 3 SP - 178 EP - 192 PB - Ernst CY - Berlin AN - OPUS4-1319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Prüfung und Bemessung von Kunststoff-Dränmatten T2 - 18. Fachtagung "Die Sichere Deponie" CY - Würzburg, Deutschland DA - 2002-02-14 PY - 2002 UR - http://www.deponie-stief.de/pdf/fachlit_pdf/2002skz_mueller.pdf IS - 18 SP - F1 EP - F13 PB - SKZ CY - Würzburg AN - OPUS4-1301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Ekenhorst, Derk A1 - Brzezinka, Klaus-Werner A1 - Hentschel, Manfred P. ED - Krenkel, W. T1 - Fiber Induced Failure of Carbon/Carbon Composites T2 - 4th International Conference on High Temperature Ceramic Matrix Composites ; 4th HT-CMC Conference CY - Munich, Germany DA - 2001-10-01 PY - 2001 SN - 3-527-30320-0 VL - 4 SP - 175 EP - 180 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Müller, Werner T1 - Standard and alternative landfill capping design in Germany N2 - Engineered capping systems are in most cases an indispensable and often the only efficient component required by the long-term safety concept for landfills, mine tailings tips and contaminated land. In Germany the composite liner is the main component of standard landfill cappings for municipal and hazardous waste landfills and the compacted clay liner (CCL) for landfills for inert or low-contamination waste. The composite liner is a technically highly effective but very expensive system. Research and experience has given rise to concern about the proper long-term performance of a conventional single CCL as a landfill capping. Therefore, alternative capping systems are discussed and applied for landfills and for the containment of contaminated sites. This paper gives an overview on various alternative engineered cappings and suitable systems for capping reflecting the state of the art and the expert view in Germany. According to the European Council Directive on the landfill of waste an impermeable mineral layer is recommended for the surface sealing of non-hazardous landfills and a composition of artificial sealing liner and impermeable mineral layer for hazardous landfills. In both cases a drainage layer thickness of at least 0.5 m is suggested. These recommendations should be interpreted flexibly and to some extent modified in the light of the experience and results presented in this paper. KW - Landfills KW - Capping system KW - Durability KW - Permeability PY - 2004 U6 - https://doi.org/10.1016/j.envsci.2004.04.002 SN - 1462-9011 VL - 7 IS - 4 SP - 277 EP - 290 PB - Elsevier Science CY - Exeter AN - OPUS4-3742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Knipschild, F. T1 - Eignungsnachweis für Kunststoff-Dränelemente in Oberflächenabdichtungen T2 - 20. Fachtagung "Die sichere Deponie" CY - Würzburg, Deutschland DA - 2004-02-26 KW - Kunststoff-Dränelemente KW - Eignungsnachweis KW - Langzeitverhalten KW - Oberflächenabdichtungen PY - 2004 SP - G1 EP - G12 PB - SKZ CY - Würzburg AN - OPUS4-3221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Brzezinka, Klaus-Werner A1 - Peuker, Christel A1 - Langer, A. T1 - Analyse von Wasserstoff in Quarzglas T2 - 76. Glastechnische Tagung CY - Bad Soden, Deutschland DA - 2002-05-27 PY - 2002 SP - 242 EP - 245 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränmatten T2 - Fachtagung "Deponietechnik 2003 - Abschluss und Sicherung von Deponien in Sachsen-Anhalt" CY - Halle (Saale), Deutschland DA - 2003-05-22 PY - 2003 SP - C1 EP - C12 AN - OPUS4-2524 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang T1 - Diffusion and sorption of organic contaminants in compacted soils T2 - 7th International FZK/TNO Conference on Contaminated Soil ; 7th ConSoil 2000 CY - Leipzig, Germany DA - 2000-09-18 PY - 2000 SN - 0-7277-2954-3 SP - 1 EP - 7 PB - Telford CY - London AN - OPUS4-755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Müller, Werner ED - Srodo´n, J. T1 - Transport of concentrated hydrocarbons within base liner systems T2 - 9th Conference of the European Clay Groups Association (Euroclay) CY - Krakow, Poland DA - 1999-09-04 KW - Hydrocarbon PY - 1999 SP - 1 CY - Kraków AN - OPUS4-750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines T1 - Oxidative resistance of high-density polyethylene geomembranes N2 - Data are reported from oven aging in air for more than 13 years (!) and from water immersion tests for 6 years at 80 °C on various high-density polyethylene geomembranes (GM) used in landfill lining. The mechanical properties and oxidative induction times (OIT) of the samples were monitored during the long-term testing. Aging behavior in hot air is different from that in hot water. During oven aging a slow, exponential decrease of OIT is observed. Even after 13.6 years there is no indication of an oxidative degradation of the mechanical properties. During immersion in water a strong reduction in OIT occurs within the first year, after which time the curve levels off. Oxidation starts when very low OIT-values are reached after about 5 years at which time the mechanical strength rapidly falls to values below the yield point. We conclude from these data that the service life of HDPE GM's is essentially determined by the slow loss of stabilizers due to migration. The oxidation starts only after the depletion of antioxidants and then quickly leads to brittleness of the sample. However, no complete oxidative deterioration has been observed to date. We estimate by the van't Hoff rule that under normal ambient conditions many centuries will have to pass before the functional mechanical properties of state-of-the-art stabilized HDPE bulk material will be reduced below acceptable limits by oxidative degradation. KW - Durability KW - HDPE geomembrane KW - Oxidation KW - Oxidative resistance testing PY - 2003 U6 - https://doi.org/10.1016/S0141-3910(02)00269-0 SN - 0141-3910 SN - 1873-2321 VL - 79 IS - 1 SP - 161 EP - 172 PB - Applied Science Publ. CY - London AN - OPUS4-2134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Büttgenbach, Beate A1 - Jakob, Ines A1 - Mann, Heidemarie T1 - Comparison of the oxidative resistance of various polyolefin geotextiles N2 - Data are reported from oven aging in circulating air and water immersion tests at 80°C on various polyolefin (polyethylene (PE) and polypropylene (PP)) needle-punched nonwoven geotextiles (GTnws) and the results of these long-term tests are compared with the oxidative resistance of high-density PE geomembranes (HDPE GMs) described in a preceding paper (Polym. Degr. Stability 79(1) (2003) 161). Polyolefin fibers used in geotextiles are typically less stabilized, have a very high surface-to-volume ratio and an oriented morphology compared with HDPE GMs. Therefore, significant differences in the oxidation behavior of these products are expected which may affect their durability. Two general results can be obtained from our measurements: Firstly, while the lifetime of the HDPE GM is essentially determined by the slow loss of stabilizers, for all GTnws a rapid reduction in the oxidative induction time (OIT) and, as we conclude, in the amount of stabilizer was observed during water immersion and air aging. Secondly, the mechanical property degradation of the GTnws depended strongly on the oxidation conditions: the induction period prior to the degradation was much longer for immersion in water than for oven aging in circulating air. After antioxidant depletion, an induction time of the oxidation reaction, which depends on the draw ratio of the stretched fibers and the oxygen supply, might substantially contribute to the induction period of the mechanical property degradation of GTnws. For one PP GTnw product, a sudden reduction in the mechanical strength occurred after onset of degradation which continued rapidly until complete deterioration. For other PP samples as well as for all PE GTnws the reduction in mechanical strength proceeded slowly. Best fits were obtained by modeling the degradation process of the PE GTnws by a second-order kinetic. Using an activation energy of 60 kJ/mol (Geotextiles, Geomembranes and Related Products, Balkema, Rotterdam, 1990; Conference Proceedings of the Sixth International Conference on Geosynthetics, Industrial Fabrics Association International (IFAI), Atlanta, USA, 1998, pp. 683–690; Clay Geosynthetic Barriers, Balkema, Lisse, The Netherlands, 2002, pp. 87–96), lower limits of the half-live of the degradation at worst case field conditions were obtained in the range 30–83 years. Some decades have to be added for the overall induction time. However, under field conditions with limited oxygen supply, the expected service lifetime might be at least half an order of magnitude longer. KW - Durability KW - Geotextile KW - Oxidative resistance KW - Test methods KW - Long-term testing PY - 2003 U6 - https://doi.org/10.1016/S0266-1144(03)00032-3 SN - 0266-1144 VL - 21 SP - 289 EP - 315 PB - Elsevier CY - Amsterdam AN - OPUS4-2632 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang A1 - Eckardt, Jürgen T1 - Transport of organic contaminants within composite liner systems N2 - Composite liners (a geomembrane in intimate contact with a mineral liner) are frequently used to line landfills and contaminated sites. It is therefore very important to characterise the behaviour of these systems even under extreme conditions. An investigation was undertaken to determine the influence of a mixture of concentrated organic contaminants on composite liner materials taken from test cells that had been dismantled after a 12-year permeation test. The organic hydrocarbons had permeated the HDPE-geomembrane and had then migrated or had been adsorbed within the mineral liners, depending on their properties. The obtained concentration profiles of the contaminant mixture components indicate that the various mineral layer materials have selective retardation abilities which correspond to the different parameters of the organic compounds as well as of the mineral layer. In addition, contaminant transport in the composite liners tested was modelled and the results of the model analysis compared with measurement data. An example (acetone) illustrates the calculated spatial and temporal contaminant concentration. The composite liners investigated exhibit a very good sealing capacity against the concentrated organic contaminants used. KW - Composite liner system KW - Transport modelling KW - Contaminants PY - 2002 U6 - https://doi.org/10.1016/S0169-1317(01)00093-X SN - 0169-1317 SN - 1872-9053 VL - 21 IS - 1-2 SP - 67 EP - 76 PB - Elsevier CY - Amsterdam AN - OPUS4-1353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Kunststoff-Dränmatten im Deponiebau, Teil 2: Zur Bemessung PY - 2002 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 79 IS - 4 SP - 232 EP - 242 PB - Ernst CY - Berlin AN - OPUS4-1359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Müller, Werner ED - Christensen, T. T1 - Long term behaviour of composite liners under exposure to a mixture of concentrated hydrocarbons T2 - 7th International Waste Management and Landfill Symposium ; Sardinia 99 CY - S. Margherita di Pula, Cagliari, Italy DA - 1999-10-04 KW - Landfill KW - Composite liner KW - Organic contaminants KW - Contaminant transport PY - 1999 VL - 3 SP - 165 EP - 172 PB - CISA, Environmental Sanitary Engineering Centre CY - Cagliari AN - OPUS4-1343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Müller, Werner ED - Srodo´n, J. T1 - Transport of concentrated organic compounds within base liner systems T2 - 9th Conference of the European Clay Groups Association (Euroclay) CY - Krakow, Poland DA - 1999-09-04 KW - Composite liner KW - Organic contaminants KW - Contaminant transport PY - 1999 SP - 97 CY - Kraków AN - OPUS4-1344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang A1 - Tatzky-Gerth, Renate A1 - Eckardt, Jürgen ED - Sarsby, R. T1 - Transport of organic pollutants in composite liners T2 - 3rd International Symposium on Geotechnics Related to the European Environment ; 3rd GREEN CY - Berlin, Germany DA - 2000-06-21 KW - Composite liner KW - Contaminant transport modelling PY - 2001 SN - 0-7277-3004-5 SP - 141 EP - 147 PB - Telford CY - London AN - OPUS4-1349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner ED - Egloffstein, T. T1 - Anforderungen an Kunststoff-Dränelemente für die langfristig sichere Entwässerung von Oberflächenabdichtungen T2 - 13. Karlsruher Deponie- und Altlastenseminar CY - Karlsruhe, Deutschland DA - 2003-09-17 KW - Geokunststoffe KW - Deponieabdichtungen KW - Beständigkeit PY - 2003 SN - 3-503-07485-6 SN - 0171-175X N1 - Serientitel: Abfallwirtschaft in Forschung und Praxis – Series title: Abfallwirtschaft in Forschung und Praxis IS - 128 SP - 107 EP - 118 PB - E. Schmidt CY - Berlin AN - OPUS4-2740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Geokunststoffen aus mehreren Komponenten T2 - 19. Fachtagugng: Die sichere Deponie, Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2003-02-12 PY - 2003 AN - OPUS4-5442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit->Scherfestigkeit von Betonitmatten und kunststoff-Dränmatten T2 - Deponietechnik 2003 CY - Halle (Saale), Germany DA - 2003-05-22 PY - 2003 AN - OPUS4-5443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Oberflächenabdichtungen aus PE-HD-Dichtungsbahnen für Altdeponien N2 - Bis Mitte 2005 müssen schätzungsweise 250 alte Hausmülldeponien geschlossen werden, die nicht dem Stand der Technik entsprechen. Danach muß irgendwann eine Sicherung erfolgen. Wo dies im Einzelfall kontrollierbar möglich ist, kann man versuchen, den Deponiekörper anaerob ausreagieren zu lassen oder aerob zu stabilisieren. An einer zusätzlichen technischen Barriere wird jedoch auch dann kaum ein Weg vorbeiführen. Einfache, aber hochwirksame technische Abdichtungen können auch auf der Oberfläche einer Deponie errichtet werden. Für die dort wirksamen Beanspruchungen sind Abdichtungen mit ausgewählten PE-HD-Dichtungsbahnen besonders geeignet. Eine Zulassung der Produkte für diesen Anwendungszweck ist erforderlich, da PE-HD-Werkstoffe, aber auch Dichtungsbahnen, die aus dem gleichen PE-HD-Werkstoff unterschiedlich gefertigt wurden, sich in ihren Eigenschaften drastisch unterscheiden können. KW - PE-HD-Dichtungsbahnen KW - Oberflächenabdichtungen KW - Altdeponien PY - 2004 U6 - https://doi.org/10.1002/bate.200490170 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 81 IS - 9 SP - 699 EP - 709 PB - Ernst CY - Berlin AN - OPUS4-4398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Hauptsache: schwarz und billig? Zur Eignung"alternativer" PE-HD-Dichtungsbahnen für endgültige Deponieoberflächenabdichtungen N2 - Mit PE-HD-Dichtungsbahnen kann eine sehr wirksame, endgültige Oberflächenabdichtung auf einer Deponie gebaut werden. Dies setzt zwei Dinge voraus: die Dichtungsbahnen müssen fehlerfrei eingebaut werden und sie müssen lange genug halten. Die Lebensdauern von PE-HD-Dichtungsbahnen können sich jedoch je nach Werkstoff, Verarbeitung und Installation um Größenordnungen unterscheiden. Für die Auswahl sind daher spezielle Untersuchungen zur Alterung entscheidend und die Herstellungs-, Schweiß- und Verlegetechnik müssen bestimmte technische Standards erfüllen. KW - PE-HD-Dichtungsbahnen KW - Deponieabdichtung KW - BAM-Zulassung KW - DIBt-Zulassung für LAU-Anlagen KW - Deponieverordnung PY - 2005 UR - http://www.baufachinformation.de/zeitschriftenartikel.jsp?z=05089018006 SN - 0027-2957 SN - 1863-9763 VL - 8 SP - 392 EP - 397 PB - Erich Schmidt CY - Berlin AN - OPUS4-10867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von mehrschichtigen Geokunststoffen T2 - 2. Symposium Umweltgeotechnik CY - Freiberg, Deutschland DA - 2005-09-29 KW - Scherfestigkeit KW - Zeitstand-Scherversuch KW - Geokunststoffe PY - 2005 SN - 1613-4753 SP - 75 EP - 95 PB - Kompetenz-Zentrum für Interdisziplinäres Flächenrecycling CY - Freiberg AN - OPUS4-11175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Jost, D. T1 - Eignungsgutachten für Kunststoff-Dränelemente durch die BAM KW - Kunststoff-Dränelemente KW - Eignungsgutachten KW - Deponieoberflächenabdichtung PY - 2005 SP - 213 EP - 232 PB - SKZ CY - Würzburg AN - OPUS4-11159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Seah, M.P. A1 - Spencer, S.J. A1 - Bensebaa, F. A1 - Vickridge, I. A1 - Danzebrink, H. A1 - Krumrey, M. A1 - Gross, Thomas A1 - Österle, Werner A1 - Wendler, E. A1 - Rheinländer, B. A1 - Azuma, Y. A1 - Kojima, I. A1 - Suzuki, N. A1 - Suzuki, M. A1 - Tanuma, S. A1 - Moon, D.W. A1 - Lee, H.J. A1 - Cho, H.M. A1 - Chen, H.Y. A1 - Wee, A. T. S. A1 - Osipowicz, T. A1 - Pan, J.S. A1 - Jordaan, W.A. A1 - Hauert, R. A1 - Klotz, U. A1 - van der Marel, C. A1 - Verheijen, M. A1 - Tamminga, Y. A1 - Jeynes, C. A1 - Bailey, P. A1 - Biswas, S. A1 - Falke, U. A1 - Nguyen, N.V. A1 - Chandler-Horowitz, D. A1 - Ehrstein, J.R. A1 - Muller, D. A1 - Dura, J.A. T1 - Critical review of the current status of thickness measurements for ultrathin SiO2 on Si - Part V: Results of a CCQM pilot study N2 - Results are reported from a pilot study under the Consultative Committee for Amount of Substance (CCQM) to compare measurements of and resolve any relevant measurement issues in, the amount of thermal SiO2 oxide on (100) and (111) orientation Si wafer substrates in the thickness range 1.5 - 8 nm. As a result of the invitation to participate in this activity, 45 sets of measurements have been made in different laboratories using 10 analytical methods: medium-energy ion scattering spectrometry (MEIS), nuclear reaction analysis (NRA), RBS, elastic backscattering spectrometry (EBS), XPS, SIMS, ellipsometry, grazing-incidence x-ray reflectrometry (GIXRR), neutron reflectometry and transmission electron microscopy (TEM). The measurements are made on separate sets of 10 carefully prepared samples, all of which have been characterised by a combination of ellipsometry and XPS using carefully established reference conditions and reference parameters. The results have been assessed against the National Physical Laboratory (NPL) data and all show excellent linearity. The remaining data sets correlate with the NPL data with average root-mean-square scatters of 0.15 nm, half being better than 0.1 nm and a few at or better than 0.05 nm. Each set of data allows a relative scaling constant and a zero thickness offset to be determined. Each method has an inherent zero thickness offset between 0 nm and 1 nm and it is these offsets, measured here for the first time, that have caused many problems in the past. There are three basic classes of offset: water and carbonadeous contamination equivalent to ~1 nm as seen by ellipsometry; adsorbed oxygen mainly from water at an equivalent thickness of 0.5 nm as seen by MEIS, NRA, RBS and possibly GIXRR; and no offset as seen by XPS using the Si 2p peaks. Each technique has a different uncertainty for the scaling constant and consistent results have been achieved. X-Ray photoelectron spectroscopy has large uncertainties for the scaling constant but a high precision and, critically, if used correctly, has zero offset. Thus, a combination of XPS and the other methods allows the XPS scaling constant to be determined with low uncertainty, traceable via the other methods. XPS laboratories returning results early were invited to test a new reference procedure. All showed very significant improvements. The reference attenuation lengths thus need scaling by 0.986 ± 0.009 (at an expansion factor of 2) deduced from the data for the other methods. Several other methods have small offsets and, to the extent that these can be shown to be constant or measurable, then these methods will also show low uncertainty. Recommendations are provided for parameters for XPS, MEIS, RBS and NRA to improve their accuracy. KW - Calibration KW - Ellipsometry KW - GIXRR KW - Interlaboratory study KW - MEIS KW - Neutron reflectometry KW - NRA KW - RBS KW - Silicon dioxide KW - SIMS KW - XPS PY - 2004 U6 - https://doi.org/10.1002/sia.1909 SN - 0142-2421 SN - 1096-9918 VL - 36 IS - 9 SP - 1269 EP - 1303 PB - Wiley CY - Chichester AN - OPUS4-5549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Jost, D. T1 - Eignungsgutachten für Kunststoff-Dränelemente durch die BAM T2 - 21. Fachtagung "Die sichere Deponie" CY - Würzburg, Deutschland DA - 2005-02-09 KW - Scherfestigkeit KW - Beständigkeit KW - Geokunststoffe KW - Prüftechnik PY - 2005 SP - C1 EP - C18 PB - SKZ CY - Würzburg AN - OPUS4-7027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mielke, Werner A1 - Hampe, Andreas A1 - Lützow, Wolfgang A1 - Müller, Hansjörg A1 - Pastuska, Gerhard A1 - Rook, A. A1 - Schnabel, E. A1 - Sickfeld, Jürgen A1 - Tobisch, Karl A1 - Trubiroha, Peter T1 - Einsatz von Kunststoffen in Pkw - Literaturstudie PY - 1990 SN - 0937-1214 IS - 2 SP - 9 EP - 257 PB - Bundesanstalt für Straßenwesen CY - Bergisch Gladbach AN - OPUS4-11796 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Engelhardt, Monika A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Müller, Urs A1 - Rooch, Heidemarie A1 - Saliwan Neumann, Romeo A1 - Urban, Ingrid T1 - Makro- und Mikrogefüge von Bremsbelägen KW - Bremsbelag KW - Polymermatrix-Verbundstoff KW - Röntgenfluoreszenzanalyse KW - REM KW - FIB KW - TEM PY - 2005 SN - 3-88355-343-3 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 37 SP - 105 EP - 110 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-10996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Alterung von Bewehrungsgittern aus Polyester N2 - Durch die hydrolytische Alterung ändert sich die Zugfestigkeit eines Polyester-Bewehrungsgitters im Laufe der Zeit. Nach den Empfehlungen für den Entwurf und die Berechnung von Erdkörpern mit Bewehrung aus Geokunststoffen (EBGEO) der DGGT wird dieser Effekt durch einen Abminderungsfaktor bei der Bemessung berücksichtigt. Es ist zwar im Prinzip festgelegt, wie man bei der Bestimmung eines solchen Faktors für eine chemisch bedingte Materialveränderung vorgehen soll (ISO/TR 20432), es bleiben jedoch große Freiheiten bei der Umsetzung. Die Fragen, die sich daraus bei Bewehrungsgittern aus Polyester ergeben, werden diskutiert. Es werden Bausteine eines einheitlichen Verfahrens vorgeschlagen, das sich nicht nur auf den Festigkeitsverlust, sondern auch auf die molekulare Veränderung konzentriert. N2 - Due to hydrolytic aging of the polyester material the tensile strength of PET-geogrids will change with time. According to the design recommendations (EBGEO) of the German Geotechnical Society DGGT this effect has to be taken into account by a factor of reduction. In principle the determination of the factor for chemical degradation is described in ISO/TR 20432. However, there is a considerable discretionary leeway in realizing the procedure for a special type of product. The questions, which occur from this for PET-geogrids, will be discussed in detail. Against this background building stones of a well-defined procedure are suggested, which considers not only mechanical degradation but also degradation in molecular weight. KW - Bewehrungsgitter KW - Lebensdauer KW - Polyester KW - Deponietechnik KW - Geogitter KW - Hydrolyse KW - Abminderungsfaktor KW - Alterung KW - Geogrids KW - Hydrolysis KW - Factor of reduction KW - Aging PY - 2013 U6 - https://doi.org/10.1002/bate.201200058 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 VL - 90 IS - 6 SP - 359 EP - 366 PB - Ernst & Sohn CY - Berlin AN - OPUS4-28727 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Tatzky-Gerth, Renate A1 - Wöhlecke, Andreas T1 - Vorläufige Richtlinie für die Zulassung von Bewehrungsgittern aus Kunststoff für Deponieoberflächenabdichtungen PY - 2011 SN - 0340-7551 VL - 41 IS - 4 SP - 411 EP - 444 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-25634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Kilchert, M. T1 - Aktueller Stand der Zulassung für Geokunststoffe durch die BAM und derzeitige Arbeitsthemen des Fachbeirats und seiner Arbeitsgruppen N2 - Bereits vor der vergangenen Leipziger Deponiefachtagung waren eine Reihe von Zulassungsrichtlinien für Geokunststoffprodukte verabschiedet worden. Dokumente wurden nun überarbeitet und weitere sind hinzugekommen. Die Zulassungsscheine für bereits bestehende und auch neue Zulassungen werden auf dieser Basis für die Produkte erneuert oder erstellt. T2 - 9. Leipziger Deponiefachtagung CY - Leipzig, Germany DA - 26.02.2013 PY - 2013 SP - 29 EP - 43 AN - OPUS4-27901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Söhring, Guido T1 - Leserbrief zu dem Aufsatz "Sicherung der Deponie Grube Präsident, Nordhalde, 2. Bauabschnitt" im Heft 1/13 der Zeitschrift Müll und Abfall KW - Deponie KW - Verlegefachbetrieb KW - Qualitätssicherung PY - 2013 SN - 0027-2957 SN - 1863-9763 VL - 45 IS - 5 SP - 265 PB - Erich Schmidt CY - Berlin AN - OPUS4-28828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Zur inneren Scherfestigkeit von Kunststoff-Dränelementen N2 - Kunststoff-Dränelemente werden auch in Böschungen eingebaut. Da sie in der Regel aus mehreren Komponenten, nämlich mindestens aus einem Dränkern und einem Filtervliesstoff bestehen, hängt die Standsicherheit u. a. von der inneren Scherfestigkeit der Produkte ab. Diese kann entweder durch die reine Reibung der Komponenten untereinander oder durch die mechanische Festigkeit von Fügestellen zwischen den Komponenten bedingt sein, die schon bei der Produktion hergestellt werden. Im letzteren Fall ist nicht klar, wie Ergebnisse von Reibungsversuchen im Rahmenschergerät zu interpretieren sind. Vor diesem Hintergrund wird gezeigt, wie die Druck- und Scherkräfte, die ein Produkt langfristig aushalten kann, aus einem Reibungsversuch im Zusammenhang mit Kriechversuchen abgeleitet werden können. Dieses Vorgehen wird bei der Zulassung nach der Deponieverordnung für den Einsatz in Deponieabdichtungen angewendet.----------------------------------------------------------------------------------------------------- Geocomposite drains (GCD) are used on long and steep slopes. Since they are usually composed of different components, at least a drain core in connection with a nonwoven filter geotextile, the internal shear strength is of significant relevance for the slope stability. The internal shear strength may be due to pure friction forces between the different components or due to the mechanical strength of the bonding between the components achieved in a special production process. In the latter case the interpretation of the results of friction shear box tests is quite unclear. Against this background it is shown how the pressure and shear forces, which are acceptable for a product in the long run, may be derived from such a shear box test in combination with long-term creep tests. The procedure is used within the framework of the certification of the products for landfill cover systems according to the German landfill ordinance. KW - Kunststoff-Dränelement KW - Scherfestigkeit KW - Reibungsversuch KW - Standsicherheit KW - Deponieverordnung KW - Geocomposite drain KW - Shear strength KW - Shear box test KW - Slope stability KW - German landfill ordinance KW - Deponietechnik - Landfills KW - Geokunststoffe - Geosynthetics KW - Laborversuche - Laboratory tests PY - 2012 U6 - https://doi.org/10.1002/gete.201200003 SN - 0172-6145 SN - 1865-7362 SN - 2190-6653 VL - 35 IS - 4 SP - 257 EP - 262 PB - VGE Verl. GmbH CY - Essen AN - OPUS4-27565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wöhlecke, Andreas A1 - Müller, Werner T1 - Prüfung der Funktion von Dichtungskontrollsystemen für Konvektionssperren in Deponieoberflächenabdichtungen N2 - Mit Dichtungskontrollsystemen (DKS) werden Konvektionssperren in Oberflächenabdichtungssystemen von Deponien kontrolliert. Die Funktionsfähigkeit eines eingebauten DKS muss in jedem Projekt zuvor überprüft werden. Diese projektspezifische Funktionsprüfung des DKS selbst wird am Beispiel der Verwendung mit einer Kunststoffdichtungsbahn (KDB) diskutiert. Der grundsätzliche Aufbau, die zugrunde liegenden Messprinzipien und das Ziel der Prüfung werden vorgestellt. Die Anforderungen an die nach der Deponieverordnung (DepV) zugelassenen Systeme hinsichtlich Betrieb, Leitungsfähigkeit und Konstruktion werden beschrieben. Dabei wird auf die Vorgaben der Richtlinie, die einer Zulassung zugrunde liegt, eingegangen. Das mögliche Vorgehen bei der projektspezifischen Kontrollprüfung im Hinblick auf Aspekte wie Vorgehensweise, Zeitpunkt und Randbedingungen sowie äußere Einflussfaktoren werden diskutiert.-------------------------------------------------------------------------------------------------------------------------------------------------------------- Leak detection systems (LDS) are used to control tight barriers in landfill cover systems. However, the efficiency of the installed LDS itself has to be verified in every landfill construction project. As an example the efficiency test for LDS used in connection with geomembranes is discussed in detail. The basic principles, the measuring techniques and objectives of the efficiency testing are described. The requirements for a certification of LDS under the terms of the new German landfill ordinance with regard to operation, capability and design are listed. The conditions necessary for a certification of LDS are introduced. Possible project related efficiency testing procedures with respect to the scope, time of convenience, general conditions as well as external influencing factors are discussed. KW - Dichtungskontrollsysteme KW - Deponieoberflächenabdichtungen KW - Kunststoffdichtungsbahn KW - Deponieverordnung KW - Funktionsprüfung KW - Leak detection systems KW - Landfill cover systems KW - Geomembranes KW - German landfill ordinance KW - Efficiency testing KW - Deponietechnik - Landfill technology KW - Qualitätssicherung - Quality Assurement KW - Umwelttechnik/Umweltschutz - Environmental Technology/Protection PY - 2012 U6 - https://doi.org/10.1002/bate.201200027 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 89 IS - 12 SP - 851 EP - 857 PB - Ernst & Sohn CY - Berlin AN - OPUS4-27612 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas ED - Jost, D. ED - Albers, K. T1 - Langzeitverhalten von Kunststoff-Dränelementen und Bewehrungsgittern und die Anforderungen der Deponieverordnung N2 - Ein Geokunststoffprodukt muss in einer Deponieabdichtung unter allen relevanten Einwirkungen seine Funktion mindestens 100 Jahre lang erfüllen. Diese Annahme ist nicht schon allein dann gerechtfertigt, wenn Alterungsuntersuchungen gezeigt haben, dass der verwendete Werkstoff voraussichtlich so lange halten wird. Darüber hinaus gehende Fragestellungen zur Funktionserfüllung, die im Zulassungsverfahren bearbeitet werden müssen, werden am Beispiel von Kunststoff-Dränelementen und Bewehrungsgittern diskutiert. Es geht dabei um die Auswirkung von äußeren Kräften, die über diesen sehr langen Zeitraum einwirken. Die Grenze für noch zulässige Druck- und Scherkräfte bei einem Kunststoff-Dränelement muss ausgelotet und das zugehörige Wasserableitvermögen bestimmt werden. Mögliche Einschränkung für den Herausziehwiderstand eines Bewehrungsgitters müssen abgeschätzt werden. Damit werden auch die Aufgaben zukünftiger Normungstätigkeit Umrissen. Ergänzend werden einige Erläuterungen zu aktuellen Entwicklungen gegeben: Eine neue Ausgabe der Fremdprüferrichtlinie wurde erarbeitet. Zulassungen für Bewehrungsgitter wurden erteilt. Schließlich wird kurz erklärt, was Befristung einer Zulassung, Erlöschen einer Zulassung und Widerruf einer Zulassung bedeuten. T2 - 29. Fachtagung - Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 31.01.2013 KW - Deponieverordnung KW - Zulassung KW - Kunststoff-Dränelemente KW - Bewehrungsgitter aus Kunststoff PY - 2013 SP - 1 EP - 18 CY - Würzburg AN - OPUS4-27705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Neues von der Zulassung & Langzeitverhalten von Geokunststoffen T2 - 29. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2013-01-31 PY - 2013 AN - OPUS4-27732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Biedermann, K. A1 - Engelmann, B. A1 - Wöhlecke, Andreas T1 - Das Zulassungsverfahren für Geokunststoffe im Deponiebau N2 - Die neue Deponieverordnung regelt im Anhang 1 auch den Einsatz von Geokunststoffen im Deponiebau. Deren Eignung muss der zuständigen Behörde gegenüber nachgewiesen werden. Auf die entsprechenden Regelungen wurde im ersten Teil dieses Aufsatzes eingegangen. Zumindest in den nächsten Jahren kommt nur ein Nachweis durch Vorlage einer Zulassung der BAM Bundesanstalt für Materialforschung und -prüfung in Betracht. Das Zulassungsverfahren wird in der Deponieverordnung geregelt. Die Zulassungsbehörde soll u.a. nicht nur ein bestimmtes Produkt auf der Grundlage von Zulassungsrichtlinien überprüfen, sondern auch in Zusammenarbeit mit einem Fachbeirat Anforderungen an den fachgerechten Einbau und das Qualitätsmanagement festlegen. Das Zulassungsverfahren und einige wesentliche technische Zulassungsanforderung, die für Kunststoffdichtungsbahnen, Schutzschichten, Geotextilien, Kunststoff-Dränelement, Bewehrungsgitter aus Kunststoff und Dichtungskontrollsysteme inzwischen erarbeitet und in Zulassungsrichtlinien beschrieben wurden, werden erläutert. KW - Deponieverordnung KW - Deponieabdichtungssysteme KW - BAM-Zulassung KW - Geokunststoffe PY - 2012 SN - 0027-2957 SN - 1863-9763 VL - 44 IS - 02 SP - 94 EP - 101 PB - Erich Schmidt CY - Berlin AN - OPUS4-25513 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Kilchert, M. T1 - Aktuelle Informationen zum Stand der Arbeit und zu den Arbeitsergebnissen des Fachbeirates der BAM zur Zulassung von Geokunststoffen und Dichtungskontrollsystemen T2 - 8. Leipziger Deponiefachtagung - Planung, Bau, Betrieb, Stolllegung, Nachsorge, Nachnutzung und Rückbau von Deponien CY - Leipzig, Deutschland DA - 2012-02-28 PY - 2012 SP - 37 EP - 49 AN - OPUS4-25556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Burkhardt, G. ED - Egloffstein, T. T1 - Neue Richtlinien zur Zulassung von Kunststoffdichtungsbahnen, Kunststoff-Dränelementen und Geokunststoffen für Trenn-, Filter-, Schutz- und Bewehrungsfuntkionen sowie Dichtungskontrollsystemen gemäß neuer DepV T2 - Abschluss und Rekultivierung von Deponien und Altlasten 2010 - Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste Änderungsverordnung zur neuen DepV CY - Karlsruhe, Deutschland DA - 2010-10-13 PY - 2010 SN - 978-3-939662-08-2 VL - 19 SP - 49 EP - 64 PB - ICP Eigenverlag Bauen und Umwelt CY - Karlsruhe AN - OPUS4-25557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Stand der Zulassungen für Geokunststoffe nach der novellierten Deponieverordnung T2 - 28. Fachtagung "Die sichere Deponie", Veranstalter: SKZ Con Sem GmbH und AK GWS e. V. CY - Würzburg, Germany DA - 2012-02-09 PY - 2012 AN - OPUS4-25586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner T1 - Geosynthetics and their certification for landfill liner and capping systems in Germany T2 - 5th International conference geosynthetics Middle East 2012 CY - Abu Dhabi, UAE DA - 2012-11-19 PY - 2012 IS - Chapter 15 SP - 173 EP - 184 CY - Würzburg AN - OPUS4-27784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Egloffstein, T. ED - Burkhardt, G. T1 - Stand der Zulassungen von Geokunststoffen im Bereich Deponien T2 - 22. Karlsruher Deponie- und Altlastenseminar 2012 - Abschluss und Rekultivierung von Deponien und Altlasten CY - Karlsruhe, Germany DA - 2012-10-17 PY - 2012 SN - 978-3-939662-12-9 VL - 23 SP - 59 EP - 75 PB - ICP Eigenverlag Bauen und Umwelt CY - Karlsruhe AN - OPUS4-27785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststofftechnische Fremdprüfung beim Bau von Abdichtungen für Deponien und Altlasten KW - Deponietechnik KW - Fremdprüfung KW - Geokunststoffe PY - 2008 IS - Abschnitt C SP - 1 EP - 18 CY - Würzburg AN - OPUS4-16716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststofftechnische Fremdprüfung beim Bau von Abdichtungen für Deponien und Altlasten T2 - 24. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2008-02-07 PY - 2008 AN - OPUS4-16717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hsuan, Y.G. A1 - Schröder, Hartmut A1 - Rowe, K. A1 - Müller, Werner A1 - Greenwood, J. A1 - Cazzuffi, D. A1 - Koerner, R.M. ED - Neil Dixon, T1 - Long-term performance and lifetime prediction of geosynthetics N2 - To properly understand and assess the long-term behaviour of geosynthetic materials it is necessary to investigate the various types of possible degradation mechanims. This includes both chemical and mechanical behaviour, and sometimes even their interactions with one another. Clearly, chemical degradation of geosynthetics depends on the polymer type. For example, polyolefins are vulnerable to oxidation; polyesters are susceptible to hydrolysis; and plasticizers can leach from polyvinyl chloride. This paper describes the concept of these three types of degradation, but focuses on the oxidation of polyolefins since the majority of the geosynthetics is made from this type of polymer. The methods used to predict the lifetime of antioxidants and service life of the geosynthetic material will be illustrated. Furthermore, the influence of temperature, pressure, and ultraviolet light on the service life are also demonstrated. Finally, the current specifications targeting the longevity of different geosynthetics are presented. Regarding mechanical degradation, the paper mainly focuses upon the creep deformation of geogrids and stress crack resistance (SCR) of polyethylene geomembranes and geopipe. The method to assess stress crack resistance is described, and the microscopic mechanisms that lead to such failure are explained. For creep evaluation, different acceleration tests are presented and their applicability with respect to the different types of polymers is illustrated. In addition, the long-term shear behaviour of geocomposites and geosynthetic clay liners is presented. T2 - 4th European Geosynthetics Conference - EuroGeo4 CY - Edinburgh, Scotland, UK DA - 2008-09-07 KW - Geosynthetic KW - Durability KW - Degradation KW - Antioxidant KW - Weathering PY - 2008 SP - 1 EP - 41 AN - OPUS4-17975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränelementen T2 - 4. Geokunststoff-Kolloquium CY - Garmisch-Partenkirchen, Deutschland DA - 2005-01-27 KW - Geokunststoffe KW - Scherfestigkeit KW - Lebensdauer PY - 2005 SP - 1 EP - 22 CY - Espelkamp-Fiestel AN - OPUS4-15940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Eignungsgutachten für Kunststoff-Dränelemente durch die BAM T2 - 21. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2005-11-09 PY - 2005 AN - OPUS4-15963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Funktionsdauer von Dränmatten als Entwässerungselemente in Oberflächenabdichtungen von Deponien und Altlasten, Erkenntnissen aus den Begutachtungen der BAM T2 - 23. Fachtagung "Die sichere Deponie", Sicherheit von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2007-02-01 PY - 2007 AN - OPUS4-15964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststoffdichtungsbahnen als Abdichtungselement in Oberflächenabdichtungen T2 - Status-Workshop, Anforderungen an Oberflächenabdichtungen CY - Höxter, Germany DA - 2006-11-30 PY - 2006 AN - OPUS4-15965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränelemente T2 - IV. Geokunststoff-Kolloquium der Naue Unternehmensgruppe CY - Garmisch-Partenkirchen, Germany DA - 2005-01-27 PY - 2005 AN - OPUS4-15966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Albers, K. A1 - Müller, Werner ED - Ramke, Hans-Günter ED - Witt, Karl-Josef ED - Bräcker, Wolfgang ED - Tiedt, Michael T1 - Kunststoffdichtungsbahnen als Abdichtungselement in Oberflächenabdichtungssystemen T2 - Status-Workshop "Anforderungen an Deponie-Oberflächenabdichtungssysteme" CY - Höxter, Deutschland DA - 2006-11-30 KW - Kunststoffdichtungsbahnen KW - Deponien KW - Zulassungen PY - 2007 SN - 3-9807985-5-0 VL - 06 SP - 65 EP - 85 CY - Höxter AN - OPUS4-16079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Prüfung und Bemessung von Kunststoff-Dränmatten T2 - 17. Fachtagung: Die sichere Deponie, Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2002-02-14 PY - 2002 AN - OPUS4-6058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner ED - Kuwano. J., ED - Jinicji, K. T1 - Geosynthetic drain elements for landfill cappings: Long-term water flow capacity and long-term shear strength T2 - 8th International Conference on Geosynthetics CY - Yokohama, Japan DA - 2006-09-18 KW - GCD KW - Water flow capacity KW - Shear strength KW - Long-term behaviour KW - Aging KW - Landfill cappings PY - 2006 SN - 90-5966-044-7 SP - 321 EP - 324 PB - Millpress CY - Rotterdam AN - OPUS4-14430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Herrmann, R. T1 - Eignungsnachweise bei Geokunststoffen für Dämme, Deiche und Stauanlagen T2 - 2. Symposium Sicherung von Dämmen, Deichen und Stauanlagen CY - Siegen, Deutschland DA - 2006-02-09 KW - Geokunststoffe KW - Wasserbau KW - Deiche PY - 2006 VL - 2 SP - 435 EP - 440 PB - IfG CY - Siegen AN - OPUS4-14445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Tatzky-Gerth, Renate A1 - Jakob, Ines A1 - Li, Chunshan ED - Jost, D. T1 - Funktionsdauer von Kunststoff-Dränelementen für Oberflächenabdichtungen von Deponien und Altlasten T2 - 23. Fachtagung "Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen" CY - Würzburg, Deutschland DA - 2007-02-01 KW - Kunststoff-Dränelemente KW - Lebensdauer KW - Oberflächenabdichtungen PY - 2007 SP - 1 EP - 20 PB - SKZ CY - Würzburg AN - OPUS4-14539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Seah, M.P. A1 - Spencer, S.J. A1 - Bensebaa, F. A1 - Vickridge, I. A1 - Danzebrink, H. A1 - Krumrey, M. A1 - Gross, Thomas A1 - Österle, Werner A1 - Wendler, E. A1 - Rheinländer, B. A1 - Azuma, Y. A1 - Kojima, I. A1 - Suzuki, N. A1 - Suzuki, M. A1 - Tanuma, S. A1 - Moon, D.W. A1 - Lee, H.J. A1 - Cho, H.M. A1 - Chen, H.Y. A1 - Wee, A. T. S. A1 - Osipowicz, T. A1 - Pan, J.S. A1 - Jordaan, W.A. A1 - Hauert, R. A1 - Klotz, U. A1 - van der Marel, C. A1 - Verheijen, M. A1 - Tamminga, Y. A1 - Jeynes, C. A1 - Bailey, P. A1 - Biswas, S. A1 - Falke, U. A1 - Nguyen, N.V. A1 - Chandler-Horowitz, D. A1 - Ehrstein, J.R. A1 - Muller, D. A1 - Dura, J.A. T1 - Ultra-thin SiO2 on Si, Part V: Results of a CCQM Pilot Study of Thickness Measurements KW - SiO2 KW - Thin films KW - Thickness KW - XPS KW - Ellipsometry KW - TEM PY - 2003 SN - 1473-2734 SP - 57 pages AN - OPUS4-4118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Die oxidative Alterung von Geokunststoffen aus Polyethylen und Polypropylen T2 - Nutzungsdauer von Rohren und Geokunststoffen aus Polyolefinen CY - Würzburg, Germany DA - 2013-11-14 PY - 2013 AN - OPUS4-29562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Jakob, Ines A1 - Robertson, Daniela A1 - Tatzky-Gerth, Renate A1 - Wöhlecke, Andreas T1 - Die oxidative Alterung von Geokunststoffen aus Polyethylen und Polypropylen N2 - Geokunststoffe aus Polyethylen (PE) oder Polypropylen (PP) müssen mit Antioxidantien (AO) stabilisiert werden, damit sie die für die Anwendung in der Geotechnik erforderliche Lebensdauer erreichen. Die Lebensdauer ist dann aber nicht durch die Empfindlichkeit des Polymers gegen Oxidation, sondern durch den Verlust der AO im Laufe der Zeit bedingt. AO können durch den Verbrauch bei Oxidationsreaktionen, durch den Abbau im Polymer, durch die Wanderung an dessen Oberfläche, durch den Abbau auf der Oberfläche, schließlich durch Abdampfen von der Oberfläche oder durch sich Lösen in einem umgebenden flüssigen Medium verloren gehen. Bei den Geokunststoffen aus PP und PE wie auch bei anderen polyolefinen Kunststoffprodukten findet man häufig zwei bestimmte „Pakete“ aus Antioxidantien: (1) eine Kombination von Substanzen aus bestimmten Klassen von sterisch gehinderten Phenolen und Phosphiten und (2) eine Substanz aus der Klasse der sterisch gehinderten Amine (HAS) in Verbindung mit einer geringfügigen phenolischen und phosphitischen Verarbeitungsstabilisierung der Formmasse. Der Verlust der AO wie auch der oxidative Abbau der mechanischen Eigenschaften des Geokunststoffs verläuft ganz unterschiedlich, je nachdem mit welchem Paket stabilisiert wurde. Diese Unterschiede werden im Rahmen eines „3-Stadien-Modells“ diskutiert. Stadium A: die Antioxidantien gehen verloren. Stadium B: die Oxidation läuft langsam an. Stadium C: die Oxidation wirkt sich mehr oder weniger drastisch auf die Produkteigenschaften aus. Dabei zeigt sich, dass das Modell nur auf das Paket 1 anwendbar ist. Im Falle des Pakets 2 findet in gewissem Umfang schon im Stadium A ein oxidativer Abbau statt, ln beiden Fällen ist es aber die AO-Verlustzeit die eigentlich die Lebensdauer bestimmt. Es werden dann Abschätzungen der Lebensdauer von PEHDDichtungsbahnen und von PP-Vliesstoffen gegeben. Die Prüfung und Bewertung der oxidativen Beständigkeit muss die Eigenart der Wirkung und des Verlusts unterschiedlicher Stabilisierungen berücksichtigen. Vor diesem Hintergrund wird die Hochdruck-Autoklav-Prüfung beurteilt. Es werden die Besonderheiten dieser Prüfmethode aufgezeigt, die sich jeweils bei der Anwendung auf Produkte ergeben, die entweder mit dem Paket 1 oder dem Paket 2 stabilisiert wurden. Eine Vorhersage der Lebensdauer unter Anwendungsbedingungen aus den Ergebnissen der Autoklav-Prüfung ist sehr schwierig und vermutlich nur in bestimmten Fällen überhaupt möglich. Ähnliches gilt auch für die vergleichende Bewertung der oxidativen Beständigkeit von Produkten. T2 - Fachtagung Nutzungsdauer von Rohren und Geokunststoffen aus Polyolefinen CY - Würzburg, Germany DA - 14.11.2013 KW - Geokunststoffe KW - PE KW - PP KW - Oxidative Alterung PY - 2013 SP - 1 EP - 48 PB - SKZ - Das Kunststoff-Zentrum CY - Würzburg AN - OPUS4-29606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten A1 - Jakob, Ines A1 - Müller, Werner T1 - Hydrolytic degradation and functional stability of a segmented shape memory poly(ester urethane) N2 - In order to understand the effects of water and hydrolytic ageing on semi-crystalline poly(ester urethane) and its shape memory functionality, water immersion experiments at elevated temperature have been performed on a model substance and various parameters were monitored: change of the melting/crystallisation temperatures, substantial increase in crystallinity, temperature dependence of the water diffusion coefficient and solubility, hydrogen-bonding index and phase mixing by peak deconvolution of the FT-IR carbonyl region and day-to-day tensile and thermo-mechanical cyclic tensile tests. A rising fraction of freezable water agglomerates in the polymer was found for specimens cooled from the immersion temperature. The degradation process could be divided into three phases: an induction phase, a phase of continuous degradation and a phase of accelerated degradation. Shape recovery remains fairly constant during phase one and decreases slowly during phase two. The increase in crystallinity in phase two is accompanied by an increase in shape fixing ability. KW - Shape memory polymer KW - Poly(ester urethane) KW - Thermo-mechanical properties KW - Hydrolysis PY - 2009 U6 - https://doi.org/10.1016/j.polymdegradstab.2008.10.012 SN - 0141-3910 SN - 1873-2321 VL - 94 IS - 1 SP - 61 EP - 73 PB - Applied Science Publ. CY - London AN - OPUS4-18661 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten A1 - Müller, Werner T1 - Shape memory poly(ester urethane) with improved hydrolytic stability N2 - In two hydrolytic degradation studies the tensile (mechanical) and functional (thermo-mechanical) properties of a hydrolysis-stabilized shape memory poly(ester urethane) and its non-stabilized analog were investigated. Hydrolytic degradation was enforced by specimen immersion in de-ionized water at 80 °C. Significant differences in the fundamental shape memory parameters were monitored as function of aging time for the stabilized and non-stabilized polymer. This included the ability to recover strain (shape recoverability) and stress (stress recoverability) on heating after shape programming. Hydrolysis-related mechanical and functional changes were correlated with morphological ones, detected by differential scanning calorimetry (DSC). The shape memory poly(ester urethane), which was protected by a carbodiimide-based hydrolysis stabilizer, revealed significantly improved resistance towards hydrolysis with respect to various mechanical and shape memory parameters. KW - Shape memory polymers KW - Hydrolytic degradation KW - Stabilization KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 U6 - https://doi.org/10.1016/j.polymdegradstab.2009.12.020 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 5 SP - 880 EP - 888 PB - Applied Science Publ. CY - London AN - OPUS4-21270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Pretsch, Thorsten T1 - Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling N2 - The shape memory functionality of a segmented poly(ester urethane) and its hydrolytically aged specimens has been studied by cyclic thermo-mechanical measurements with an imposed strain of 100%. The shape memory effect was triggered by a melting transition in the soft segment phase. Aging was enforced by immersion in hot de-ionized water. In the course of the immersion the tensile properties (secant moduli, stress and strain at yield and break) were impaired by hydrolysis. Advanced specimen embrittlement finally led to rupture during the first thermo-mechanical cycle. This happened after 68 days of aging at 55 °C and correspondingly after 8 days at 80 °C. The residual strain after the first cycle, which was about 25%, increased significantly with aging time. Therefore, the total strain recoverability became ever smaller: aged specimens needed conditioning by at least two cycles for a full development of shape recoverability. Likewise the recovery force decreased continuously. Despite these degradation effects, it was observed that the shape fixity and the cycle-related shape recovery of appropriately conditioned specimens (number of cycles N > 2) remained on a constant high level (at round 100% and between 90% and 100%, respectively) throughout the whole aging period. These observations are discussed within the framework of a simplified model of the behavior of crystallizable shape memory polymers. The amorphous state of the polymer is described by the equation of the linear visco-elastic solid. As for the semi-crystalline state the material is assumed to react elastically with respect to deviations from the configuration, which was frozen up under constraint conditions. The curves of the dependence of the material behavior on aging time at 55 °C match perfectly those at 80 °C when the time axis is adjusted by a factor of 8.5, from which the apparent activation energy for hydrolytic aging in the amorphous state of 82 kJ mol-1 could be deduced. KW - Shape memory polymers KW - Hydrolytic degradation KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 U6 - https://doi.org/10.1016/j.eurpolymj.2010.05.004 SN - 0014-3057 SN - 1873-1945 VL - 46 IS - 8 SP - 1745 EP - 1758 PB - Elsevier CY - Oxford AN - OPUS4-21819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas T1 - Die Zulassung von Geokunststoffen, Polymeren und Dichtungskontrollsystemen nach der neuen Deponieverordnung T2 - 26. Fachtagung - Die sichere Deponie CY - Würzburg DA - 2010-02-18 KW - Geokunststoffe KW - Zulassung KW - Deponieabdichtungen KW - Deponieverordnung PY - 2010 N1 - Geburtsname von Wöhlecke, Andreas: Tuchscherer, A. - Birth name of Wöhlecke, Andreas: Tuchscherer, A. IS - Kap. B SP - 1 EP - 15 CY - Würzburg AN - OPUS4-20923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Die Zulassung von Geokunststoffen, Polymeren und Dichtungskontrollsystemen nach der neuen Deponieverordnung T2 - 26. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Saathoff, F. A1 - Cantré, S. A1 - Müller, Werner T1 - The new German filtration criteria for geosynthetics in landfill construction T2 - Euro GEO 5 - 5th European geosynthetics congress CY - Valencia, Spain DA - 2012-09-16 KW - Filtration KW - Geosynthetics KW - Landfill PY - 2012 SN - 978-0415-64340-5 VL - 5 IS - Topic: Transport SP - 264 EP - 268 AN - OPUS4-26934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Biedermann, K. A1 - Engelmann, B. A1 - Wöhlecke, Andreas T1 - Geokunststoffe in der Deponietechnik im Licht der neuen Deponieverordnung KW - Deponieverordnung KW - Deponieabdichtungssysteme KW - BAM-Zulassung KW - Geokunststoffe PY - 2012 SN - 0027-2957 SN - 1863-9763 VL - 44 IS - 1 SP - 8 EP - 12 PB - Erich Schmidt CY - Berlin AN - OPUS4-25437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas ED - Jost, D. ED - Albers, K. T1 - Stand der Zulassungen für Geokunststoffe nach der novellierten Deponieverordnung T2 - 28. Fachtagung - Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Deutschland DA - 2012-02-09 KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - Kunststoff-Dränelemente KW - Geotextile Filter PY - 2012 IS - Kap. B SP - 1 EP - 22 CY - Würzburg AN - OPUS4-25462 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Egloffstein, T. ED - Burkhardt, G. T1 - Zulassung von Bewehrungsgittern aus Kunststoff für den Deponiebau N2 - Geokunststoffe müssen ihre Funktion über einen Zeitraum von mindestens 100 Jahren erfüllen. Bei der Beurteilung müssen alle relevanten und damit zu erwartenden Einwirkungen auf die Produkte berücksichtigt werden. Dies gilt im besonderen Maße für Produkte, die befristetet zugelassen werden. Bei der Beurteilung der Produkte reicht es nicht ausschließlich, den reinen chemischen Abbau des Grundwerkstoffes zu betrachten. Weitergehende Fragestellungen müsse geklärt werden. So müssen z. B. Auswirkungen von mechanischen Belastungen, die über einen sehr langen Zeitraum wirken, betrachtet werden. In diesem Zusammenhang soll das Zulassungskonzept für Bewehrungen aus Kunststoff vorgestellt werden. Hier müssen mögliche Einschränkungen für den Herausziehwiderstand abgeschätzt werden. Ergänzend werden einige Erläuterungen zu aktuellen Entwicklungen der Arbeit der BAM und des Fachbeirats gegeben: Eine neue Ausgabe der Fremdprüferrichtlinie wurde erarbeitet. Befristete Zulassungen für Bewehrungsgitter und neue Zulassungen für Kunststoff-Dränelemente wurden erteilt. In bestimmten Fällen ist es sinnvoll und hilfreich, nur befristete Zulassungen zu erteilen. Daher werden Hintergründe für Befristungen erläutert. Schließlich wird dargelegt, was die Begriffe Befristung einer Zulassung, Erlöschen einer Zulassung und Widerruf einer Zulassung bedeuten. T2 - 23. Karlsruher Deponie- und Altlastenseminar 2013 - Abschluss und Rekultivierung von Deponien und Altlasten 2013 CY - Karlsruhe, Germany DA - 16.10.2013 KW - Deponien KW - Kreislaufwirtschaft KW - Rekultivierung von Altlasten PY - 2013 SN - 978-3-939662-13-6 VL - 24 SP - 59 EP - 70 PB - ICP Eigenverlag Bauen und Umwelt AN - OPUS4-29692 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner T1 - The behaviour of HDPE geomembranes and installation quality control in geotechnical application N2 - The German Landfill Ordinance regulates the use of geosynthetics and other materials in the field of waste Containment Systems. It requires a certification of the geosynthetics by the BAM. The certification-guidelines define the state of the art by giving detailed requirements and specifications i the various geosynthetic products used in landfill constructions. According to the German Landfill Ordinance geosynthetic products have to fulfil their function for more than 100 years. Beyond, supported by an advisory board of landfill experts, BAM has developed installation requirements and demands on quality management for production, installation and third party control. The BAM is responsible to define tests and testing criteria for geosynthetics, to include provisions into the certification document and in addition to stipulate requirements with regard to installation procedure and quality management in Germany. All documents of the BAM such as certification guidelines, recommendations and testing specifications which are approved by the advisory board are published in German language on the website and in the Official Gazette*** of the BAM. For the certification one of the basic requirements is that the geosynthetic product is produced with well defined and well reproducible properties. Thus, a sophisticated quality management System is needed. In addition, not only production control, but also a quality assurance for the installation is necessary. T2 - International Symposium Geosynthetics India 2013 and seminar on geosynthetic barriers CY - New Delhi, India DA - 23.10.2013 PY - 2013 SP - 29 EP - 39 AN - OPUS4-29694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Anja A1 - Krahl, T. A1 - Radnik, Jörg A1 - Wagner, Andreas A1 - Werner, W. S. M. A1 - Ritter, B. A1 - Kemnitz, E. A1 - Unger, Wolfgang T1 - Chemical in-depth analysis of (Ca/Sr)F2 core–shell like nanoparticles by X-ray photoelectron spectroscopy with tunable excitation energy N2 - The fluorolytic sol–gel synthesis is applied with the intention to obtain two different types of core–shell nanoparticles, namely, SrF2–CaF2 and CaF2–SrF2. In two separate fluorination steps for core and shell formation, the corresponding metal lactates are reacted with anhydrous HF in ethylene glycol. Scanning transmission electron microscopy (STEM) and dynamic light scattering (DLS) confirm the formation of particles with mean dimensions between 6.4 and 11.5 nm. The overall chemical composition of the particles during the different reaction steps is monitored by quantitative Al Kα excitation X-ray photoelectron spectroscopy (XPS). Here, the formation of stoichiometric metal fluorides (MF2) is confirmed, both for the core and the final core–shell particles. Furthermore, an in-depth analysis by synchrotron radiation XPS (SR-XPS) with tunable excitation energy is performed to confirm the core–Shell character of the nanoparticles. Additionally, Ca2p/Sr3d XPS intensity ratio in-Depth profiles are simulated using the software Simulation of Electron Spectra for Surface Analysis (SESSA). In principle, core–shell like particle morphologies are formed but without a sharp interface between calcium and strontium containing phases. Surprisingly, the in-depth chemical distribution of the two types of nanoparticles is equal within the error of the experiment. Both comprise a SrF2-rich core domain and CaF2-rich shell domain with an intermixing zone between them. Consequently, the internal morphology of the final nanoparticles seems to be independent from the synthesis chronology. KW - Metal fluorides KW - Sol-gel synthesis KW - Synchrotron radiation KW - X-ray photoelectron spectroscopy PY - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-522284 SN - 0142-2421 VL - 53 IS - 5 SP - 494 EP - 508 PB - Wiley VCH AN - OPUS4-52228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner Wolfgang A1 - Tarnowski, C. A1 - Wöhlecke, Andreas A1 - Zanzinger, H. ED - Kelsey, C. T1 - The "Zero Leakage" approach for landfill liner and capping systems N2 - An approach to achieve “zero leakage” is discussed with respect to the experience in Germany, where strict regulations for landfill lining and capping systems have been developed and issued because of large environmental problems related to landfills that accumulated in the 1970’s and 1980’s. Using a thick, high quality HDPE geomembrane (GMB), which is installed free of residual waves and wrinkles in intimate contact with a compacted clay liner (CCL) or geosynthetic clay liner (GCL) of very low permeability, by a qualified, experienced, well equipped and properly third-party controlled installer and which are protected by heavy protection layers designed with respect to long-term performance of the GMB, may result in a liner or capping system of practically no leakage. This is demonstrated by analyzing results of measurements obtained from permanently installed leak detection systems in combination with HDPE GMBs. The survey is based on 32 German landfills with 1,276,500 m² of installed HDPE GMB. T2 - GeoAmericas 2016 - 3rd Pan-American Conference on Geosynthtics CY - Miami Beach, FL, USA DA - 10.04.2016 KW - Geomembanes KW - Installation KW - Welding KW - Quality management PY - 2016 SN - 978-0-9884772-2-3 VL - 1 SP - 441 EP - 453 PB - Minerva - Technology, Resources, and Information CY - Jupiter, Florida, USA AN - OPUS4-36499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner Wolfgang ED - Al-Akel, S. T1 - Aktuelle Themen aus dem BAM-Fachbeirat und von der Zulassungsstelle N2 - In diesem Beitrag soll in Kürze darüber informiert werden, welche Themen und Fragestellun-gen den Fachbeirat der BAM, seine Arbeitsgruppen und die BAM beschäftigt haben. Bereits in den letzten Jahren wurde an dieser Stelle über die Anforderungen an Kunststoff Drän-elemente berichtet. Vor dem Hintergrund unserer Beiträge zu diesem Thema, kam eine in-tensive Fachdiskussion im Fachbeirat der BAM und in weiteren Fachgremien in Gang. So wurden die Bemessungsgrundsätze der DGGT (Deutsche Gesellschaft für Geotechnik), die GDA (Geotechnik der Deponien und Altlasten) E (Empfehlung) 2-20 (Entwässerungsschich-ten in Oberflächenabdichtungssystemen), in einigen Punkten angepasst. Eine Musterverle-geanleitung für Kunststoff Dränelemente wurde erarbeitet. Der aktuelle Bearbeitungsstand soll hier vorgestellt werden. In diesem Zusammenhang wurde ein Untersuchungsprogramm zum Einfluss von Überlappstößen auf das Wasserableitvermögen von Kunst-stoff Dränelementen angestoßen. Die Ergebnisse sollen hier in Kürze vorgestellt und die Bedeutung für die Abminderungsfaktoren und damit für die Bemessung erläutert werden. Zu welchem Zeitpunkt muss ein Kunststoff Dränelement überbaut werden und welche weiteren Regelungen müssen hier beachtet werden? Was steckt eigentlich hinter diesen strengen Regelungen? Diese Fragen sollen im Folgenden diskutiert werden. Die Deponieverordnung (DepV) fordert eine Akkreditierung der fremdprüfenden Stellen nach verschiedenen Normen. Die fachlichen Anforderungen an den „Fremdprüfer-Kunststoff“ legt die Richtlinie Fremdprüfer der BAM fest. Um diese Anforderungen im Akkreditierungsprozess ausreichend berücksichtigen zu können, wurde nun eine sogenannte DAkkS Regel erarbeitet, die die Anforderungen der Richtlinie spiegelt. Über den aktuellen Bearbeitungsstand soll berichtet werden. Auch über die aktuelle Arbeit in Zusammenhang mit den Kunststoffdichtungsbahnen (KDB) soll berichtet werden. Der Prüfhinweis B14 (Bestimmung der Maßhaltigkeit von geosyntheti-schen Dichtungsbahnen aus Polyethylen hoher Dichte (PEHD)) wurde überarbeitet. Voran-gegangen war eine intensive Entwicklung der Prüfeinrichtung sowie ausgiebige Ringversuche im AK GWS (Arbeitskreis Grundwasserschutz). In diesem Zusammenhang wurden neue Anforderungen an die Produkte gestellt. Die Hintergründe dazu sollen kurz vorgestellt werden. Die DVS (Deutscher Verband für Schweißen und verwandte Verfahren) Richtlinie 2225-4 regelt das Schweißen der KDB auf der Deponiebaustelle. Werden KDB im strukturierten Bereich miteinander verschweißt, werden die Strukturen in der Regel vorher abgetragen. Die DVS Richtlinie 2225-4 sieht unter bestimmten Voraussetzungen von einem Abtragen der Strukturen ab. Vor diesem Hintergrund wurde ein Untersuchungsprogramm initiiert, das die Auswirkungen aufzeigen soll. Der Bearbeitungsstand wird vorgestellt. T2 - 12. Leipziger Deponiefachtagung CY - Leipzig, Germany DA - 08.03.2016 KW - Deponieabdichtungen KW - Schweißen KW - Geokunststoffe KW - Kunststoffdichtungsbahnen PY - 2016 SN - 978-3-943443-37-0 VL - 12 SP - 34 EP - 45 PB - HTWK - Hochschule für Technik, Wirtschaft und Kultur Leipzig CY - Leipzig, Germany AN - OPUS4-36502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas T1 - Was gibt es Neues? Stand der Zulassungen von Geokunststoffen nach der DepV N2 - Was gibt es Neues? In diesem Beitrag wird über den aktuellen Stand bei der Zulassung von Geokunststoffen berichtet. Was die erteilten Zulassungen selbst anbelangt, so kann sich jeder an Hand einer Liste im Internet1 informieren. Dort findet man auch alle Dokumente zur Zulassung. Im Folgenden geht es daher um einige aktuelle fachliche Themen und zugehörige Fragen, die bereits in der obigen Zusammenfassung umrissen wurden. T2 - 30. Fachtagung - Die sichere Deponie - Geokunststoffe im Umweltschutz CY - Würzburg, Germany DA - 02.02.2014 KW - Zulassung KW - Geokunststoffe KW - Deponieverordnung KW - Deponieabdichtung PY - 2014 IS - Kap. B SP - 1 EP - 29 CY - Würzburg AN - OPUS4-30283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner ED - Egloffstein, T. ED - Burkhardt, G. T1 - Anwendungsgrenzen von Kunststoffdränelementen N2 - Auch Kunststoffdränelemente sind wie alle Kunststoffprodukte für Kriechen und Stabilitätsversagen anfällig. Ein Kunststoffdränelement verformt sich unter langanhaltender Druck- und Scherbelastung allmählich. Dabei werden die Dicke und damit auch das Wasserableitvermögen reduziert. Wenn die Verformung parallel zur Ebene im Laufe der Zeit einen kritischen Wert überschreitet, kann es zum Scherversagen kommen. Das Kunststoffdränelement kann auch Zusammenbrechen, wenn die Dicke des Produktes einen kritischen Wert unterschreitet. Diese Effekte werden an Hand von Daten von Herstellern von vier verschiedenen Produkten beschrieben. Das Langzeit-Wasserableitvermögen und die akzeptable Grenzen für die Scher- und Normalspannung vor dem Hintergrund von Scherversagen und Dränkemstabilität und die Lebensdauer in Bezug auf diese Versagensmechanismen werden durch Zuhilfenahme standardisierter Prüfverfahren bestimmt. Diese Eigenschaften von Kunststoffdränelementen müssen bei der Planung dauerhafter geotechnischer Bauwerke berücksichtigt werden. Zudem wird kurz auf das Qualitätsmanagement bei dem Einbau und der Lagerung der Produkte auf der Deponiebaustelle eingegangen. T2 - Seminar: Abschluss und Rekultivierung von Deponien und Altlasten - Planung und Bau neuer Deponien / Drohen Entsorgungsengpässe auf Deponien in Deutschland? - Knappe Deponiekapazitäten für gering belastete mineralische Abfälle (DK0 / DK I) CY - Karlsruhe, Germany DA - 22.10.2014 PY - 2014 SN - 978-3-939662-15-0 VL - 26 SP - 53 EP - 62 PB - ICP Eigenverlag Bauen und Umwelt CY - Karlsruhe AN - OPUS4-31951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner T1 - Requirements and performance tests on leak detection systems (LDS) for HDPE geomembranes in landfill covers in Germany N2 - The German landfill ordinance regulates the use of geosynthetics, polymers and leak detection systems (LDS) in the field of landfill engineering in Germany. It governs the certification process and sets a framework for the requirements on these products. The certification guidelines of the BAM Federal Institute of Materials Research and Testing turn these requirements into detailed technical specifications and associated test procedures. The present paper describes the procedure of developing certification guidelines for LDS by BAM and its advisory board. The requirements for the certification of LDS under the terms of the new German landfill ordinance with regard to operation and capability are listed and the technical criteria are described. The performance test for LDS used in connection with geomembranes is discussed in detail. T2 - 10th ICG - International Conference on Geosynthetics CY - Berlin, Germany DA - 21.09.2014 KW - Leak detection systems KW - Landfill cover systems KW - Geomembranes KW - German landfill ordinance KW - Efficiency testing PY - 2014 SP - 1 EP - 8 AN - OPUS4-31865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas ED - Ziegler, M. ED - Bräu, G. ED - Heerten, G. ED - Laackmann, K. T1 - The performance of geocomposite drains in the long run N2 - Like all plastic products, geocomposite drains (GCD) are susceptible to creep and creep rupture. The GCD is slowly and continuously deformed under long lasting shear and pressure forces. The thickness is reduced and thereby the water flow capacity. If the in-plane deformation reaches a critical value in the course of time, shear failure might occur. Likewise, if the thickness reaches a critical value the structure of the drain core might collapse. These effects are shown using data provided by the manufacturers of four different GCD. Long-term water flow capacity and the acceptable limits of shear stress and normal stress (pressure) with respect to shear rupture and drain core stability as well as the lifetime with respect to these failure modes are determined using standard test methods. The design of long lasting geotechnical structures has to take into account these characteristics of the long-tem performance of GCD. T2 - 10th International conference on geosynthetics CY - Berlin, Germany DA - 21.09.2014 KW - Geocomposite drains KW - Creep KW - Creep rupture KW - Long-term water flow capacity KW - Long-term shear strength KW - Drain core stability PY - 2014 SN - 978-3-9813953-9-6 SP - 1 EP - 7 AN - OPUS4-31574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Ziegler, M. ED - Bräu, G. ED - Heerten, G. ED - Laackmann, K. T1 - Long-term pull-out resistance and material properties of geogrids N2 - Geogrids, which are installed to prevent sliding failure on long and steep slopes, have to be safely anchored. The design and calculation of the anchorage is based on simple design rules. Basically, it is assumed that the pull-out resistance is proportional to the soil shear strength, the vertical load and the anchoring length and that the soil-reinforcement coefficient of proportionality as determined in pull-out tests is typically in the range between 0.5 and 1. Based on an extended version of a model for the soil-geogrid interaction, which was described by Ziegler and Timmers (2004) and Sieira et al. (2009), the physical assumptions and limitations of these rules are discussed. For those geogrids, for which the passive thrust mobilization of earth pressure by the displacement of the transversal or bearing force grid elements substantially contributes to the pull-out resistance, the mechanical strength of the junction between longitudinal and transversal elements is of crucial importance. The relation between mechanical properties of the junction, the flexibility of the longitudinal grid elements, the surface friction and the finally achieved pull-out resistance is exemplarily shown by a model calculation. It is included, that due to aging and creep the short-term junction strength may be significantly lower than the long-term strength. There is a certain critical pull-out resistance and an associated critical anchorage length. Both are determined by the strength of the junction embedded into the soil and are independent from the actually installed anchorage length. For a safe design it is not allowed to go beyond that limit. This requirement restricts the range of application of the common design rules. It follows that not only the long-term strength of the longitudinal elements has to be considered and quantified by reduction factors but also the long-term strength of junctions. These limitations have to be observed to achieve a safe design of the anchorage. Preliminary design rules are discussed. T2 - 10th International conference on geosynthetics CY - Berlin, Germany DA - 21.09.2014 KW - Geogrid KW - Anchoring KW - Junctions KW - Junction strenght KW - Sliding failure PY - 2014 SN - 978-3-9813953-9-6 SP - 1 EP - 8 AN - OPUS4-31575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Saathoff, F. A1 - Cantré, S. A1 - Müller, Werner ED - Ziegler, M. ED - Bräu, G. ED - Heerten, G. ED - Laackmann, K. T1 - Modified filtration criteria for non-woven geotextiles in landfill construction N2 - The German landfill ordinance includes a certification requirement for geosynthetics used in landfill liner and capping systems. The certification guidelines describe the basis for the design of geosynthetics used in landfill construction. According to the rules which are usually applied, the thickness of the filter geotextile has to be at least 30 times the characteristic opening size O90. Filter geotextiles which are often used in geocomposite drains have a mass per area of 200 g/m² and do not fulfill this requirement. In this paper modified filter criteria for geosynthetics are presented with a particular focus on These geotextile filters in geocomposite drains. T2 - 10th International conference on geosynthetics CY - Berlin, Germany DA - 21.09.2014 KW - Filtration criteria KW - Drainage KW - Geotextile KW - Non-woven KW - Landfill KW - Certification guidelines PY - 2014 SN - 978-3-9813953-9-6 SP - 1 EP - 7 AN - OPUS4-31578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - The performance of geocomposite drains in the long run T2 - 10th International Conference on Geosynthetics CY - Berlin, Germany DA - 2014-09-22 PY - 2014 AN - OPUS4-31589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Long-term pull-out resistance and materials properties of geogrids T2 - 10th International Conference on Geosynthetics CY - Berlin, Germany DA - 2014-09-22 PY - 2014 AN - OPUS4-31590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - On the determination of the chemical reduction factor for PET geogrids N2 - Data from four samples of commercially available PET geogrids (made either of yarns or bars), which were measured by BAM or other institute, are analyzed to discuss the procedure and problems of determining the chemical reduction factor RFCH associated with a certain service life. Estimates from Arrhenius extrapolation usually have very large statistical errors. The level of confidence must therefore be specified. A reliable estimate requires data from immersion tests below the glass transition temperature of PET. To extrapolate the time of reductions for each reduction factor at such low temperatures, one has to know the functional form of the mechanical degradation curve. It is shown how the degradation curve of the tensile strength may be obtained by determining the relation between increase in concentration of carboxyl end group (CEG) and decrease in tensile strength. Therefore, experimental studies to determine the chemical reduction factor should be accompanied by the measurements of the CEG concentration and the intrinsic viscosity. Furthermore, such measurements allow a non-ambiguous determination of the molecular mass. Hydrolytic molecular degradation will proceed continuously even at 20 °C with half-life of the inverse of the CEG concentration of 40–100 y. Nevertheless, small chemical reduction factors at a lifetime of 100 y are obtained with high level of confidence for materials with low initial CEG concentration and high molecular mass. This is shown by pooling data from samples with comparable CEG concentration, molecular mass and above all comparable intrinsic relation between increase in CEG concentration and decrease in strength. Therefore, the recommendation of ISO TR 20432, Table 2, for chemical reduction factors seems to be applicable to PET geogrids with index properties well below the one specified by the technical report. Whether these index properties are actually a sufficient condition to have small chemical reduction factors even at a very long service life is still an open question. The determination of chemical reduction factor should be based on aging experiments, at least for products with index properties close to the limiting values for the following reasons. (1) Even so standards are available, results of different laboratories on absolute values of CEG concentration and number averaged molecular mass differ to a certain extent. (2) Other factors, like crystallization, affect the mechanical degradation significantly. (3) There is no universally applicable form of the mechanical degradation curve. KW - Hydrolytic degradation KW - Polyester KW - Geogrid KW - Chemical reduction factor KW - Aging PY - 2014 U6 - https://doi.org/10.1016/j.geotexmem.2013.12.009 SN - 0266-1144 VL - 42 IS - 2 SP - 98 EP - 110 PB - Elsevier CY - Amsterdam AN - OPUS4-30231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Dichtungsbahnen zur Abdichtung von Deponien und Altlasten T2 - 25. Fachtagung - Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Deutschland DA - 2009-02-26 KW - Kunststoffdichtungsbahnen KW - Deponien KW - Altlasten PY - 2009 IS - Abschnitt C SP - 1 EP - 22 CY - Würzburg AN - OPUS4-19064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines A1 - Li, C.S. A1 - Tatzky-Gerth, Renate T1 - Durability of polyolefin geosynthetic drains N2 - The German Federal Institute for Materials Research and Testing (BAM) has established a testing guideline to assess the suitability of geosynthetic or geocomposite drain (GCD) elements for final landfill cover systems. In an earlier paper the uniform procedure according to the BAM guideline for determining long-term water flow capacity was described, and the structural stability of drain cores under creep was investigated. The extrapolation of creep curves is permissible only when it can be shown, over the extrapolated period (at least 100 years), that oxidative aging does not invoke any relevant changes in the polyolefin material. This can be shown by measuring antioxidant depletion and mechanical degradation of the drain cores and filter/protection geotextiles in oven aging and water immersion tests. In this paper the results of such aging studies on three different GCD products are reported. Degradation of the tensile strength of HALS-stabilized polypropylene needle-punched nonwoven geotextiles (PP NWGTs) starts right from the beginning of the oven aging. This has to be taken into account for lifetime predictions based on residual tensile strength. The rate of oxidative degradation of NWGTs decreases significantly with increasing mass per area. Therefore the expected service life sets a limit on acceptable geotextile grammage. Antioxidant depletion in the drain cores, which are made of relatively thick PP strands or HDPE ribs, is about an order of magnitude slower than in filter and protection NWGTs, which are made of thin fibers. Service life values in excess of 100 years may be obtained for the products when the geotextiles and drain cores are properly stabilized and designed. KW - Geosynthetics KW - Geosynthetic drain elements KW - Long-term behavior KW - Oxidative degradation PY - 2009 U6 - https://doi.org/10.1680/gein.2009.16.1.28 SN - 1072-6349 VL - 16 IS - 1 SP - 28 EP - 42 PB - Telford CY - London, UK AN - OPUS4-18999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Dichtungsbahnen zur Abdichtung von Deponien und Altlasten T2 - 25. Fachtagung "Die sichere Deponie", Süddeutsches Kunststoffzentrum (SKZ) CY - Würzburg, Germany DA - 2009-02-26 PY - 2009 AN - OPUS4-19015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Deponieabdichtungen - Zulassungen der BAM Bundesanstalt für Materialforschung und -prüfung T2 - Veranstaltung im Rahmen des Jahresfortbildungsprogramms für die Niedersächsische Gewerbeaufsichtsverwaltung (GAV) 2010: Spezialthemen der Deponiegenehmigung und -überwachung CY - Hildesheim, Germany DA - 2010-11-24 PY - 2010 AN - OPUS4-22643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Wöhlecke, Andreas T1 - Voraussetzungen für die Zulassung von Geokunststoffen (insbesondere Bewehrungsgittern) für Deponieabdichtungen N2 - Der Fachbeirat beschloss im vergangenen Jahr Zulassungsrichtlinien für Kunststoffdichtungsbahnen, Schutzschichten, Kunststoff-Dränelemente und Geotextilien zum Filtern und Trennen und eine Richtlinie über Anforderungen an Verlegefachbetriebe, die von seinen Arbeitsgruppen vorbereitet worden waren, und nunmehr die Grundlage für die Zulassungstätigkeit bilden. In diesem Beitrag wird im Anschluss an die Ausführungen auf der letzten Fachtagung kurz über wesentliche Anforderungen und Zulassungsvoraussetzungen berichtet. Noch nicht verabschiedet sind die Richtlinien für Dichtungskontrollsysteme und Bewehrungsgitter aus Kunststoff. Auf den Diskussionsstand bei den Anforderungen an die Bewehrungsgitter wird etwas ausführlicher eingegangen, da sich neben den materialtechnischen auch bemessungstechnische Probleme ergeben. T2 - 27. Fachtagung - Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 24.02.2011 KW - Deponieverordnung KW - Zulassung KW - Geokunststoffe KW - Bewehrungsgitter aus Kunststoff PY - 2011 IS - Kap. B SP - 1 EP - 23 CY - Würzburg AN - OPUS4-23305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Zur Bemessung der Verankerung von Bewehrungsgittern aus Kunststoff beim Schutz von Böschungen vor hangparallelem Gleiten N2 - Bewehrungsgitter aus Kunststoff, die zum Schutz vor hangparallelem Gleiten auf langen und steilen Böschungen eingebaut werden, müssen sicher verankert werden. Für den Entwurf und die Berechnung der Verankerung sind bestimmte Regeln gebräuchlich. An Hand von Modellen für die Wechselwirkung zwischen Füllboden und Bewehrungsgitter wird diskutiert, welche physikalischen Annahmen und Vereinfachungen in diese Bemessungsregeln eingehen. Dabei wird gezeigt, dass das bisher benutzte Bemessungskonzept ohne Einschränkung nur auf eine spezielle Klasse von Bewehrungsgittern anwendbar ist, deren Herausziehwiderstand überwiegend von Effekten der 'Oberflächenreibung' zwischen Bodenpartikeln und Längselementen des Gitters bedingt ist ('Reibungsgitter'). Für die Bemessung muss hier der Verbundbeiwert dieser reinen Oberflächenreibung verwendet werden. Bei Bewehrungsgittern, wo ein Erddruck, der sich vor den Querelementen des Gitters aufbaut, maßgeblich zum Herausziehwiderstand beiträgt, ist die Festigkeit der Verbindungsstellen zwischen Längs- und Querelementen von entscheidender Bedeutung für eine sichere Verankerung ('Erddruckgitter'). Die Zusammenhänge zwischen mechanischem Verhalten der Verbindungsstellen, Dehnbarkeit der Längselemente, Oberflächenreibung und maximaler Herausziehkraft werden beispielhaft aufgezeigt. Die Festlegung eines Bemessungswiderstands der Verbindungsstellen, der grundsätzlich nicht überschritten werden darf, erfordert eine Modifikation des Bemessungskonzepts. Zwei Fälle können unterschieden werden: Bei Böden mit hinreichend geringer innerer Reibung und geringer Auflast, wo der maximal mobilisierbare Erdwiderstand die zulässige Festigkeit der Verbindungsstelle nicht übersteigen kann, können die Bemessungsregeln noch angewendet werden. In allen anderen Fällen nicht mehr: Der Bemessungswiderstand der Verbindungsstelle setzt nämlich der möglichen aktivierbaren Verankerungslänge eine obere Grenze. Es können dann auch nur Zugkräfte bis zu einer bestimmten Stärke verankert werden, völlig unabhängig davon, wie groß die Zugfestigkeit des Bewehrungsgitters ist. Nur bei Beachtung dieser Grenzen ist eine langfristig sichere Verankerung möglich. KW - Bewehrungsgitter aus Kunststoff KW - Geogitter KW - Deponieoberflächenabdichtung KW - Verankerung KW - Bemessung KW - EBGEO KW - Gleiten KW - Hangparalleles KW - Herausziehkraft KW - Langzeitverhalten KW - Bewehrte Erde KW - Geogrids KW - Landfill capping system KW - Slope stability KW - Pull-out strength KW - Anchoring KW - Long-term behavior KW - Design with reinforced soil KW - Bodenmechanik KW - Baustoffe KW - Soil mechanics KW - Building materials PY - 2011 U6 - https://doi.org/10.1002/bate.201101472 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 VL - 88 IS - 6 SP - 347 EP - 361 PB - Ernst & Sohn CY - Berlin AN - OPUS4-23927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Voraussetzungen für die Zulassung von Geokunststoffen (insbesondere Bewehrungsgitter) für Deponieabdichtungen T2 - 27. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2011-02-23 PY - 2011 AN - OPUS4-23442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Müller, Urs A1 - Desplanques, Y. A1 - Bulthé, A.-L. A1 - Degallaix, G. A1 - Dmitriev, A.I. T1 - 3rd Body formation of two different brake pad materials designed for railway application T2 - 5th European Conference on Braking (JEF 2006) CY - Lille, France DA - 2006-11-08 PY - 2006 SP - 107 EP - 115 AN - OPUS4-18699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines A1 - Tatzky-Gerth, Renate T1 - Long-term water flow capacity of geosynthetic drains and structural stability of their drain cores KW - Geosynthetics KW - Drain elements KW - Long-term behavior KW - Water flow capacity KW - Creep behavior PY - 2008 SN - 1072-6349 VL - 15 IS - 6 SP - 437 EP - 451 PB - Telford CY - London, UK AN - OPUS4-18630 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines A1 - Li, Chunshan A1 - Tatzky-Gerth, Renate T1 - Antioxidant depletion and OIT values of high impact PP strands KW - Polypropylene KW - Stabilizers KW - Oxidative resistance KW - Antioxidant depletion KW - Oxidative induction time PY - 2009 U6 - https://doi.org/10.1142/S0256767909004102 SN - 0256-7679 VL - 27 IS - 3 SP - 435 EP - 445 PB - World Scientific CY - Singapore AN - OPUS4-19458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Kunststoffdichtungsbahnen für Deponieabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 33 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin ET - 3. Auflage AN - OPUS4-22192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Kunststoff-Dränelementen für Deponieoberflächenabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 30 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-22193 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Zulassung von Geotextilien zum Filtern und Trennen für Deponieabdichtungen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-22194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Tatzky-Gerth, R. T1 - Richtlinie für die Anforderungen an Fachbetriebe für den Einbau von Kunststoffdichtungsbahnen, weiteren Geokunststoffen und Kunststoffbauteilen in Deponieabdichtungssystemen KW - Zulassungsrichtlinien KW - Geokunststoffe KW - Deponieverordnung PY - 2010 SN - 0340-7551 SP - 1 EP - 15 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin ET - 2. Auflage AN - OPUS4-22195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Saathoff, F. A1 - Müller, Werner A1 - Witt, K. J. T1 - Neue Regelungen im Deponiebau N2 - Die neue Deponieverordnung fordert Zulassungen für Geokunststoffe, die in Deponiedichtungs­systemen eingesetzt werden. Diese gesetzliche Vorgabe führt dazu, dass in nationalen Regelwerken und Empfehlungen neue Vorgehensweisen verankert werden müssen. Zulassungsstelle ist die BAM Bundesanstalt für Materialforschung und -prüfung. Zuständig für die entsprechenden GDA Empfehlungen ist die UAG-Ak 5.1-6.1. Der Beitrag zeigt die Neuerungen, aber auch die Ausnahmeregelungen. Auf der Grundlage der Deponieverordnung hat die BAM einen Fach­beirat zusammengerufen, der verschiedene Arbeitsgruppen eingerichtet hat, um Zulassungsrichtlinie für Kunststoffdichtungsbahnen, Schutzschichten, Geotextilien zum Filtern und Trennen sowie Bewehrungsgitter aus Kunststoff zu erarbeiten oder zu aktualisieren. Die Zulassungsanforderungen lehnen sich wiederum eng an GDA- und EAG-Empfehlungen an. In dem Beitrag wird der Stand der Fachdiskussion in den Arbeitsgruppen erläutert. KW - Deponieverordnung KW - Geokunststoffe KW - GDA-Empfehlung KW - EDA-Empfehlung KW - BAM-Zulassung PY - 2011 SN - 0172-6145 SN - 1865-7362 SN - 2190-6653 IS - Sonderheft 2011 SP - 53 EP - 57 PB - VGE Verl. GmbH CY - Essen AN - OPUS4-24273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wöhlecke, Andreas A1 - Müller, Werner Wolfgang ED - Egglofstein, T.A. ED - Burkhardt, G. T1 - Aktuelles aus dem Fachbeirat der BAM und von der Zulassungsstelle N2 - Unser Beitrag soll auch in diesem Jahr über aktuelle Diskussionsthemen und Fragestellungen im Fachbeirat der BAM, in seinen Arbeitsgruppen und in der BAM informieren. Im vergangenen Jahr wurde intensiv über die Qualitätssicherung und den Einbau von Kunststoff-Dränelementen diskutiert. In diesem Zusammenhang wurde ein Untersuchungsprogramm zum Einfluss von Überlappstößen auf das Wasserableitvermögen von Kunststoff-Dränelementen angestoßen. Die Ergebnisse sollen hier in Kürze vorgestellt und die Bedeutung für die Abminderungsfaktoren und damit für die Bemessung erläutert werden. Zu welchem Zeitpunkt muss ein Kunststoff Dränelement überbaut werden und welche weiteren Regelungen müssen hier beachtet werden? Was steckt eigentlich hinter diesen strengen Regelungen? Diese Fragen sollen im Folgenden diskutiert werden. Die Deponieverordnung (DepV) fordert eine Akkreditierung der fremdprüfenden Stellen nach verschiedenen Normen. Die fachlichen Anforderungen an den „Fremdprüfer-Kunststoff“ legt die Richtlinie Fremdprüfer der BAM fest. Um diese Anforderungen im Akkreditierungsprozess ausreichend berücksichtigen zu können, wurde nun eine sogenannte DAkkS Regel erarbeitet, die die Anforderungen der Richtlinie spiegelt. Über den aktuellen Stand soll berichtet werden. Auch über die aktuelle Arbeit in Zusammenhang mit den Kunststoffdichtungsbahnen (KDB) soll berichtet werden. Der Prüfhinweis B14 (Bestimmung der Maßhaltigkeit von geosynthetischen Dichtungsbahnen aus Polyethylen hoher Dichte (PEHD)) wurde überarbeitet. Vorangegangen war eine intensive Entwicklung der Prüfeinrichtung sowie ausgiebige Ringversuche im AK GWS (Arbeitskreis Grundwasserschutz). In diesem Zusammenhang wurden neue Anforderungen an die Produkte gestellt. Die Hintergründe dazu sollen kurz vorgestellt werden. Die DVS (Deutscher Verband für Schweißen und verwandte Verfahren) Richtlinie 2225-4 regelt das Schweißen der KDB auf der Deponiebaustelle. Werden KDB im strukturierten Bereich miteinander verschweißt, werden die Strukturen in der Regel vorher abgetragen. Die DVS Richtlinie 2225-4 sieht unter bestimmten Voraussetzungen von einem Abtragen der Strukturen ab. Vor diesem Hintergrund wurde vom AK GWS ein Untersuchungsprogramm initiiert, das die Auswirkungen aufzeigen soll. Die Ergebnisse und Schlussfolgerungen werden vorgestellt. Die europäischen Anwendungsnormen und das deutsche Straßenbaumerkblatt für Geokunststoffe verwenden statistische Begriffe. Deren nur „beiläufige“ Erwähnung lässt jedoch offen, was genau im Zusammenhang gemeint ist. Produkte unterschiedlicher Hersteller können daher trotz gleicher Angaben zu den Mindestwerten in den Leistungserklärungen oder Datenblättern deutlich unterschiedliche Eigenschaften haben. Um vorschriftsmäßig bemessen zu können, muss man jedoch wissen, was sich hinter den Zahlen verbirgt. Eine Zulassung oder Zertifizierung ist nur dann sinnvoll, wenn darüber hinaus einheitlich definiert wird, was die Angaben für die werkseigene Produktionskontrolle, die Inspektion durch benannte Stellen und die Kontrolle durch Dritte bedeuten. In den vergangenen Jahren seit 2009 wurde versucht, die Zulassungen stärker auf die Vorgaben aus der europäischen Normung zu stützen. Daher musste nun diskutiert werden, welche statistische Bedeutung die Angaben in den Zulassungen für Kunststoff-Dränelementen und Geotextilien zum Filtern und Trennen haben. Hier musste eine einheitliche Regelung getroffen werden. Über die Ergebnisse soll berichtet werden. T2 - 26. Karlsruher Deponie- und Altlastenseminar CY - Karlsruhe, Germany DA - 19.10.2016 KW - Deponieabdichtunssysteme KW - Schweißen KW - Kunststoffdichtungsbahnen PY - 2016 SN - 978-3-939662-19-8 SP - 61 EP - 75 PB - ICP Eigenverlag Bauen und Umwelt CY - Karlsruhe AN - OPUS4-38018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stephan, H. A1 - Walther, M. A1 - Fähnemann, S. A1 - Ceroni, P. A1 - Molloy, J.K. A1 - Bergamini, G. A1 - Heisig, F. A1 - Müller, C.E. A1 - Kraus, Werner A1 - Comba, P. T1 - Bispidines for dual imaging N2 - The efficient transformation of the hexadentate bispidinol 1 into carbamate derivatives yields functional bispidines enabling convenient functionalization for targeted imaging. The BODIPY-substituted bispidine 3 combines a coordination site for metal ions, such as radioactive 64CuII, with a fluorescent unit. Product 3 was thoroughly characterized by standard analytical methods, single crystal X-ray diffraction, radiolabeling, and photophysical analysis. The luminescence of ligand 3 was found to be strongly dependent on metal ion coordination: CuII quenches the BODIPY fluorescence, whereas NiII and ZnII ions do not affect it. It follows that, in imaging applications with the positron emitter 64CuII, residues of its origin from enriched 64Ni and the decay products 64NiII and 64ZnII, efficiently restore the fluorescence of the ligand. This allows for monitoring of the emitted radiation as well as the fluorescence signal. The stability of the 64CuII–3 complex is investigated by transmetalation experiments with ZnII and NiII, using fluorescence and radioactivity detection, and the results confirm the high stability of 64CuII–3. In addition, metal complexes of ligand 3 with the lanthanide ions TbIII, EuIII, and NdIII are shown to exhibit emission of the BODIPY ligand and the lanthanide ion, thus enabling dual emission detection. KW - Bispidines KW - Chelates KW - Imaging agents KW - Lanthanides KW - Radiolabeling KW - Nuclear medical application KW - Radioactive labelling KW - SPECT PY - 2014 U6 - https://doi.org/10.1002/chem.201404086 SN - 0947-6539 SN - 1521-3765 VL - 20 IS - 51 SP - 17011 EP - 17018 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-32320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -