TY - CONF A1 - Österle, Werner A1 - Müller, Urs A1 - Desplanques, Y. A1 - Bulthé, A.-L. A1 - Degallaix, G. A1 - Dmitriev, A.I. T1 - 3rd Body formation of two different brake pad materials designed for railway application T2 - 5th European Conference on Braking (JEF 2006), November 8-9, 2006, Lille, France (Proceedings) T2 - 5th European Conference on Braking (JEF 2006) CY - Lille, France DA - 2006-11-08 PY - 2006 SP - 107 EP - 115 AN - OPUS4-18699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Dörfel, Ilona A1 - Prietzel, Claudia A1 - Rooch, Heidemarie A1 - Cristol-Bulthé, A.-L. A1 - Defallaix, G. A1 - Desplanques, Y. T1 - A comprehensive microscopic study of third body formation at the interface between a brake pad and brake disc during the final stage of a pin-on-disc test JF - Wear KW - Brake KW - Third body KW - Wear KW - Friction KW - Nano-scale KW - TEM PY - 2009 DO - https://doi.org/10.1016/j.wear.2008.11.023 SN - 0043-1648 VL - 267 IS - 5-8 SP - 781 EP - 788 PB - Elsevier CY - Amsterdam AN - OPUS4-19450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tasdemir, Z. A1 - Wollschläger, Nicole A1 - Österle, Werner A1 - Leblebici, Y. A1 - Alaca, B. E. T1 - A deep etching mechanism for trench-bridging silicon nanowires JF - Nanotechnology N2 - Introducing a single silicon nanowire with a known orientation and dimensions to a specific layout location constitutes a major challenge. The challenge becomes even more formidable, if one chooses to realize the task in a monolithic fashion with an extreme topography, a characteristic of microsystems. The need for such a monolithic integration is fueled by the recent surge in the use of silicon nanowires as functional building blocks in various electromechanical and optoelectronic applications. This challenge is addressed in this work by introducing a top-down, silicon-on-insulator technology. The technology provides a pathway for obtaining well-controlled silicon nanowires along with microstructures up to a three-order-of-magnitude scale difference. A two-step etching process is developed, where the first shallow etch defines a nanoscale protrusion on the wafer surface. After applying a conformal protection on the protrusion, a deep etch step is carried out forming the surrounding microscale features. A minimum nanowire cross-section of 35 nm by 168 nm is demonstrated in the presence of an etch depth of 10 m. All cross-sectional features are characterized via transmission electron microscopy and linked to specific process steps. The technology allows control on all dimensional aspects along with the exact location and orientation of the silicon nanowire. KW - Silicon nanowire KW - Deep reactive ion etching KW - Transmission electron microscopy PY - 2016 DO - https://doi.org/10.1088/0957-4484/27/9/095303 SN - 0957-4484 SN - 1361-6528 VL - 27 IS - 9 SP - 095303-1 EP - 095303-8 PB - IOP Publishing AN - OPUS4-35789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fedelich, Bernard A1 - Frenz, Holger A1 - Österle, Werner A1 - Ohm, Katrin ED - Lütjering, G. T1 - A stochastic model for LCF small crack growth in a nickel-base superalloy T2 - Fatigue '96 T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 PY - 1996 SN - 0-08-042268-3 VL - 96 IS - 2 SP - 1263 EP - 1268 PB - Pergamon CY - Oxford AN - OPUS4-2511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dmitriev, A. I. A1 - Österle, Werner A1 - Kloß, Heinz A1 - Orts-Gil, Guillermo T1 - A study of third body behaviour under dry sliding conditions. Comparison of nanoscale modelling with experiment JF - Estonian Journal of Engineering N2 - Automotive brake pads consist of many components but it is still not entirely clear which role each of the elements of this complex composition plays to provide the specified regimes of sliding. This is due to the mutual interaction of multiscale mechanisms, realized during the friction. In this work we have attempted to partly answer this question using computer simulations. Since the simulation allows us to consider various combinations of the structure of the system being simulated ceteris paribus, it becomes possible to understand the role of each constituent sequentially. The main attention is paid to the structure and composition of the thin film that forms on the surface of both bodies as a result of compaction of the wear product, its chemical composition and oxidation. This layer, also named a third body or friction film, differs in composition and microstructure from the two first bodies. We considered a single contact for the steady state sliding when the structure and composition of friction films already are formed. As a modelling tool we used the method of movable cellular automata, which has well proven itself in solving of such tasks. We investigated the influence of modification of the structure and composition of the third body on the features of system behaviour at friction. To assess the adequacy of the numerical model, experimental studies with an artificial third body were also carried out. The Simulation results are in good agreement with experimental data. KW - Third body KW - Dry sliding KW - Mechanically mixed layer KW - Computer simulation PY - 2012 DO - https://doi.org/10.3176/eng.2012.3.12 SN - 1736-6038 SN - 1736-7522 VL - 18 IS - 3 SP - 270 EP - 278 AN - OPUS4-38545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, R. A1 - Vasconcellos, M.A.Z. A1 - Österle, Werner A1 - Prietzel, Claudia T1 - A TEM snapshot of magnetite formation in brakes: the role of the disc's cast iron graphite lamellae in third body formation JF - Wear N2 - A cross-section sample of the friction film formed on top of a disc during a brake testing procedure against Polymer Matrix Composite pads was made using a Focused Ion Beam (FIB). The FIB-cut sampled the "third body" magnetite layer and the upper part of the cast iron disc containing a graphite flake. Images of the sample examined in a Energy Filtered Transmission Electron Microscope captured an instant view of the important role of the graphite flakes in magnetite formation, where few layer graphene batches interacted with the iron border promoting cracking and oxidation along the graphite–iron interface. The resulting nano-scale interlayer of magnetite and strongly disordered graphite formed a third body which yielded adequate brake performance. KW - Cast iron KW - Carbon KW - Graphite KW - Tribochemistry KW - Electron microscopy PY - 2011 DO - https://doi.org/10.1016/j.wear.2010.11.008 SN - 0043-1648 VL - 270 IS - 5-6 SP - 365 EP - 370 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-23189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Urban, Ingrid A1 - Nebauer, E. T1 - Alloying reactions of Au-Ni-Ge ohmic contacts to n-GaAs T2 - Proceedings of the 13th International Conference on Electron Microscopy PY - 1994 SP - 781 EP - 782 CY - Les Ulis AN - OPUS4-2479 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner T1 - Alternative approaches to the microstructure-strength-relationship of LC and HSLA steels T2 - International Conference on HSLA Steels'95 T2 - International Conference on HSLA Steels'95 CY - Beijing, China DA - 1995-10-25 PY - 1995 AN - OPUS4-3342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner ED - Liu, G. T1 - Alternative approaches to the microstructure-strength-relationship of LC and HSLA steels T2 - HSLA steels '95 : proceedings of the Third International Conference on HSLA Steels T2 - Third International Conference on HSLA Steels CY - Beijing, PR China DA - 1995-10-25 PY - 1995 SN - 7-504-62091-2 SP - 243 EP - 246 PB - China Science and Technology Press CY - Beijing AN - OPUS4-2506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, R. A1 - Zen Vasconcellos, M.A. A1 - Österle, Werner A1 - Prietzel, C. T1 - Amorphization of graphite flakes in gray cast iron under tribological load JF - Materials Research N2 - A gray cast iron disc, which had been submitted to a heavy duty automotive brake test, was examined with energy filtered transmission electron microscopy. A graphite flake in a convenient angular position showed the shear interaction of graphite layers with the iron matrix in nano-scale resolution. Atomic layers of graphite were wedged into the ferritic bulk, allowing the entrance of oxygen and the subsequent formation of magnetite. The exfoliated few-layer graphene batches deformed heavily when forced into the matrix. When Raman spectra from the disc surface, which show distinctive carbonaceous bands, were compared with Raman spectra from graphite subjected to deformation in a shaker mill with different milling times, it could be seen that the shear stress on the brake surface was much more effective to induce disorder than the milling, where compressive and impact forces had been additionally exerted on the sample. During shear load the high anisotropy of elastic modulus in the graphite crystalline structure and the low adhesion between graphite basal planes allowed the exfoliation of wrinkled few-layer grapheme batches, causing the formation of more defect related Raman bands than the mechanical stress during high-energy milling. KW - Graphite KW - Shear load KW - Amorphization KW - EFTEM KW - Raman spectroscopy PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-469227 DO - https://doi.org/10.1590/1980-5373-MR-2017-1000 SN - 1516-1439 SN - 1980-5373 VL - 21 IS - 4 SP - e20171000, 1 EP - 6 PB - Universidade Federal de São Carlos CY - São Carlos AN - OPUS4-46922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Jiao, F. A1 - Österle, Werner A1 - Ziebs, Josef ED - Lütjering, G. T1 - An extended model of the tension-compression asymmetry of single crystal nickel-base superalloys T2 - Fatigue '96 T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 885 EP - 889 PB - Pergamon CY - Oxford AN - OPUS4-2508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Urban, Ingrid A1 - Severin, D. A1 - Trepte, S. T1 - Analyse von Reibschichten auf Bremsbelägen JF - Materialwissenschaft und Werkstofftechnik N2 - Die volle Leistung einer auf Reibung basierenden Bremse wird erst nach einem Einlaufvorgang erreicht. Dieser ist notwendig, um auf Belag und Scheibe eine sogenannte Reibschicht aufzubauen. Da diese Zwischenschicht das Reibungsverhalten des Systems maßgeblich bestimmt, ist es wichtig, sich Klarheit über ihre chemische Zusammensetzung, Mikrostruktur und die daraus resultierenden Eigenschaften zu verschaffen. Als Basismaterial diente ein phenolharzgebundener Belag Jurid 57-62, der mit verschiedenen Parametern (Flächenpressung und Umdrehungsgeschwindigkeit) gegen eine Stahlscheibe getestet wurde. Es wurden Dauerbremsungen von jeweils einer Stunde bzw. bis zu einem maximalen Belagverschleiß von 1 mm simuliert, wobei die Entwicklung der Reibzahl und die Oberflächentemperatur der Scheibe registriert wurde. Zur Analyse der Reibschichten auf dem Bremsbelag wurden mehrere Methoden parallel angewandt. So wurden Verschleißpartikel, die aus der Reibschicht stammen, gesammelt bzw. abgekratzt und nach Dispergieren auf Kohlefolien direkt im Transmissionselektronenmikros-kop (TEM) untersucht. Ferner wurden von einigen ausgesuchten Belagproben Mikrotom-schnitte sowie dünne Querschnittsfolien für die TEM-Untersuchung präpariert, um den Verbund Reibschicht-Grundmaterial darstellen zu können. Als Ergänzung wurden ferner oberflächenmorphologische und –analytische Verfahren wie REM/EDX und ESCA eingesetzt. Die Ergebnisse deuten darauf hin, dass die Reibschicht nanokristallin ist, und dass fast alle anorganischen Bestandteile des Bremsbelags sowie Eisenoxid von der Bremsscheibe in sehr fein verteilter Form vorliegen. Bei Belägen ohne Metallanteil bildet eine Barium-Eisen-Sulfatphase offenbar die Grundstruktur der Reibschicht, während auf eisenhaltigen Belägen Eisenoxid dominierend ist. Die nanokristalline Mikrostruktur entsteht, ähnlich wie beim mechanischen Legieren, durch einen Mahlvorgang von Verschleißpartikeln zwischen den Reibpartnern. Bei Überlastung des Belags tritt Zersetzung der Polymer-Bindephase ein, was zu einem raschen Anstieg der Verschleißrate führt. KW - Bremsbelag KW - Reibschicht KW - Reibungskoeffizient KW - Oberflächenanalyse KW - Transmissionselektronenmikroskopie PY - 2000 SN - 0933-5137 VL - 31 SP - 708 EP - 711 PB - Whiley VCH CY - Weinheim AN - OPUS4-38542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Oder, Gabriele A1 - Österle, Werner ED - Portella, Pedro Dolabella T1 - Anwendungsbeispiele für die Elektronenstrahl-Mikrosonde T2 - Fortschritte in der Metallographie - Vortragstexte der 37. Metallographie-Tagung T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 141 EP - 144 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Dmitriev, Andrey A1 - Kloß, Heinz T1 - Assessment of sliding friction of a nanostructured solid lubricant film by numerical simulation with the method of movable cellular automata (MCA) T2 - WTC 2013 - 5th World tribology congress N2 - Tribofilms formed during dry sliding usually exhibit a nanocrystalline structure and complicated composition. In the present study, tribofilms consisting mainly of a solid lubricant, namely graphite nanoparticles, are considered. Systems providing such tribofilms are candidates for anti-friction applications. Since sliding action always leads to mixing of the materials at both sides of the tribological interface, it was of major interest to study the impact of different amounts of a hard constituent, SiC in the considered case, within the soft matrix systematically. Furthermore, the impact of normal pressure was considered. A mechanically mixed layer was observed for the whole range of normal pressures and SiC volume fractions. The calculated coefficient of friction decreased significantly with increasing thickness of this layer but was only marginally affected by SiC volume fraction, which is good news for anti-friction applications. T2 - WTC 2013 - 5th World tribology congress CY - Torino, Italy DA - 08.09.2013 KW - Friction KW - Third body film KW - Numerical simulation KW - Nanostructure PY - 2013 SP - 1 EP - 4 AN - OPUS4-29659 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nebauer, E. A1 - Mai, M. A1 - Würfl, J. A1 - Österle, Werner T1 - Au/Pt/Ti/Pt base contacts to n-InGaP/p+-GaAs for self-passivating HBT ledge structures JF - Semiconductor science and technology N2 - Multi-layer ohmic contact systems such as Au/Pt/Ti/Pt on III-V double layers such as n-InGaP/p+-GaAs are of considerable technological relevance, e.g. for heterojunction bipolar transistors. The paper shows that such contacts can be effectively reacted through the InGaP layer and exhibit very good contact resistances (0.1 O mm) to the base layer if the thickness of the first Pt layer is properly matched to the thickness of the contacted InGaP layer. Interdiffusion and phase formation associated with the annealing processes are studied by cross-sectional analytical transmission electron microscopy, thin-film x-ray diffraction and Auger electron spectroscopy depth profiling. Thermal ageing experiments up to 400 °C show good electrical stability. Device related reliability tests do not show any degradation effect related to this novel base contact. PY - 2000 DO - https://doi.org/10.1088/0268-1242/15/8/306 SN - 0268-1242 SN - 1361-6641 VL - 15 IS - 8 SP - 818 EP - 822 PB - IOP Publ. CY - Bristol AN - OPUS4-2368 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Senoner, Mathias A1 - Wirth, Thomas A1 - Unger, Wolfgang A1 - Österle, Werner A1 - Kaiander, I. A1 - Sellin, R.L. A1 - Bimberg, D. T1 - BAM-L002 - A new type of certified reference material for length calibration and testing of lateral resolution in the nanometre range JF - Surface and interface analysis N2 - A new type of test sample for the determination of lateral resolution in surface analysis is presented. The certified reference material BAM-L002 Nanoscale strip pattern for length calibration and testing of lateral resolution is an embedded cross-section of epitaxially grown layers of AlxGa1-xAs and InxGa1-xAs on GaAs substrate. The surface of the sample provides a flat pattern with strip widths of 0.4-500 nm. The combination of gratings, isolated narrow strips and sharp edges of wide strips offers improved possibilities for the calibration of a length scale, the determination of lateral resolution and the optimization of instrument settings. The feasibility of the reference material for an analysis of lateral resolution is demonstrated for SIMS. PY - 2004 DO - https://doi.org/10.1002/sia.1936 SN - 0142-2421 SN - 1096-9918 VL - 36 SP - 1423 EP - 1426 PB - Wiley CY - Chichester AN - OPUS4-4696 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Dmitriev, Andrey A1 - Kloß, Heinz T1 - Basic considerations for the development of friction materials T2 - Second International Workshop on Advances in Asbestos Free Friction Composts (IWAAFC-2) T2 - Second International Workshop on Advances in Asbestos Free Friction Composts (IWAAFC-2) CY - Delhi, India DA - 2008-02-07 PY - 2008 AN - OPUS4-18212 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Dmitriev, A.I. A1 - Kloß, Heinz ED - Jayashree Bijwe, T1 - Basic considerations for the development of friction materials T2 - Proceedings of the IWAAFC-2, International Workshop on Advances in Asbestos-free Friction Composites T2 - IWAAFC-2, International Workshop on Advances in Asbestos-free Friction Composites CY - Delhi, India DA - 2008-02-07 PY - 2008 SP - 24 EP - 51 PB - Indian Academy of Sciences CY - Delhi, India AN - OPUS4-18701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner T1 - Berechnung des Streckengrenzbeitrages plättchenförmiger Teilchen auf der Grundlage einer quantitativen Gefügeanalyse mit dem TEM JF - Practical metallography : preparation, imaging and analysis of microstructures = Praktische Metallographie PY - 1984 SN - 0032-678X VL - 21 SP - 377 EP - 389 PB - Hanser CY - München AN - OPUS4-36601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner T1 - Berechnung des Streckgrenzenbeitrags plättchenförmiger Teilchen auf der Grundlage einer quantitativen Gefügeanalyse mit dem TEM JF - Praktische Metallographie = Practical metallography PY - 1984 SN - 0032-678X VL - 21 SP - 377 EP - 389 PB - Hanser CY - München AN - OPUS4-2395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jiao, Feng A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Biaxial path-dependence of low-cycle fatigue behaviour and microstructure of alloy 800 H at room temperature JF - Materials science and engineering A N2 - Low-cycle fatigue experiments under combined axial-torsional loading have been carried out on alloy 800 H tubular specimens at room temperature. In comparison with proportional loading, an extra cyclic hardening effect produced by nonproportional loading was observed. The microstructure study highlights the fact that the dislocation arrangement under proportional loading is significantly different from that under nonproportional loading. Mechanical twinning was found in specimens cycled under axial loading and nonproportional loading. It is suggested that mechanical twinning depends not only on shear stress but also on normal stress on the plane of maximum shearing. The extra hardening can be interpreted in terms of the deformation microstructure. Fatigue cracking was initiated generally at the specimen surfaces along the plane of maximum shearing, but under nonproportional loading cracks were found also in the bulk of the specimens. Transcrystalline crack propagation was observed in the specimens after proportional and nonproportional LCF tests. PY - 1995 DO - https://doi.org/10.1016/0921-5093(94)09690-2 SN - 0921-5093 SN - 1873-4936 VL - 196 IS - 1 SP - 19 EP - 24 PB - Elsevier CY - Amsterdam AN - OPUS4-2503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gemeinert, Marion A1 - Dörfel, Ilona A1 - Griepentrog, Michael A1 - Gross, U. A1 - Klaffke, Dieter A1 - Knabe, C. A1 - Kranz, I. A1 - Österle, Werner T1 - Biological response to micron- and nanometer-sized particles known as potential wear products from artificial hip joints: Part I: Selection and characterization of model particles JF - Journal of biomedical materials research / A KW - Hip joint endoprostheses KW - Wear products KW - Particle size distribution KW - Model particles KW - Dispersing behavior of particles PY - 2009 DO - https://doi.org/10.1002/jbm.a.31952 SN - 1549-3296 SN - 1552-4965 VL - 89A IS - 2 SP - 379 EP - 389 PB - Wiley CY - Hoboken, NJ AN - OPUS4-19345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kranz, I. A1 - Gonzalez, J.B. A1 - Dörfel, Ilona A1 - Gemeinert, Marion A1 - Griepentrog, Michael A1 - Klaffke, Dieter A1 - Knabe, C. A1 - Österle, Werner A1 - Gross, U. T1 - Biological response to micron- and nanometer-sized particles known as potential wear products from artificial hip joints: Part II: Reaction of murine macrophages to corundum particles of different size distributions JF - Journal of biomedical materials research / A KW - Macrophages KW - Cytokines KW - Nanoparticles (NP) KW - Microparticles (MP) KW - Corundum PY - 2009 DO - https://doi.org/10.1002/jbm.a.32121 SN - 1549-3296 SN - 1552-4965 VL - 89A IS - 2 SP - 390 EP - 401 PB - Wiley CY - Hoboken, NJ AN - OPUS4-19346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner T1 - Bohrer für den Nanometerbereich - Mikrobearbeitung und Gefügedarstellung mit der Technik des fokussierten Ionenstrahls (FIB) JF - Materialprüfung = Materials testing KW - FIB KW - Mikrobearbeitung KW - TEM KW - Nanotechnologie PY - 2004 DO - https://doi.org/10.3139/120.100573 SN - 0025-5300 VL - 46 IS - 3 SP - 113 EP - 117 PB - Carl Hanser Verlag CY - München AN - OPUS4-3495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Orts Gil, Guillermo A1 - Natte, Kishore A1 - Drescher, Daniela A1 - Bresch, Harald A1 - Mantion, Alexandre A1 - Kneipp, J. A1 - Österle, Werner T1 - Characterisation of silica nanoparticles prior to in vitro studies: from primary particles to agglomerates JF - Journal of nanoparticle research N2 - The size, surface charge and agglomeration state of nanoparticles under physiological conditions are fundamental parameters to be determined prior to their application in toxicological studies. Although silica-based materials are among the most promising candidates for biomedical applications, more systematic studies concerning the characterisation before performing toxicological studies are necessary. This interest is based on the necessity to elucidate the mechanisms affecting its toxicity. We present here TEM, SAXS and SMPS as a combination of methods allowing an accurate determination of single nanoparticle sizes. For the commercial material, Ludox TM50 single particle sizes around 30 nm were found in solution. DLS measurements of single particles are rather affected by polydispersity and particles concentration but this technique is useful to monitor their agglomeration state. Here, the influence of nanoparticle concentration, ionic strength (IS), pH and bath sonication on the agglomeration behaviour of silica particles in solution has been systematically investigated. Moreover, the colloidal stability of silica particles in the presence of BSA has been investigated showing a correlation between silica and protein concentrations and the formation of agglomerates. Finally, the colloidal stability of silica particles in standard cell culture medium has been tested, concluding the necessity of surface modification in order to preserve silica as primary particles in the presence of serum. The results presented here have major implications on toxicity investigations because silica agglomeration will change the probability and uptake mechanisms and thereby may affect toxicity. KW - Silica KW - Toxicology KW - Agglomeration KW - BSA KW - Nanoparticles KW - Characterisation PY - 2011 DO - https://doi.org/10.1007/s11051-010-9910-9 SN - 1388-0764 SN - 1572-896X VL - 13 IS - 4 SP - 1593 EP - 1604 PB - Springer AN - OPUS4-21179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Urban, Ingrid A1 - Gesatzke, Wolfgang A1 - Rooch, Heidemarie ED - Bartz, Wilfried J. T1 - Characterization and evaluation of the formation of friction layers during braking with conventional PMC friction material against a cast iron rotor T2 - Tribology and lubrication engineering - 14th International Colloquium Tribology T2 - 14th International Colloquium Tribology, "Tribology and Lubrication Engineering" CY - Stuttgart, Germany DA - 2004-01-13 PY - 2004 SN - 3-924813-54-X VL - 1 SP - 483 EP - 489 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-3494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dörfel, Ilona A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Skopp, André T1 - Characterization of defects in dry-pressed green bodies JF - Key engineering materials PY - 1994 SN - 1013-9826 VL - 89-91 SP - 763 EP - 767 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-2413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Dmitriev, A.I. A1 - Urban, Ingrid ED - Jayashree Bijwe, T1 - Characterization of up to date brake friction materials T2 - IWAAFC-1, International Workshop on Advances in Asbestos free Friction Composites, January 5-6, 2006, Delhi, India (Proceedings) T2 - IWAAFC-1, International Workshop on Advances in Asbestos free Friction Composites CY - Delhi, India DA - 2006-01-05 PY - 2006 SP - 21 EP - 35 CY - Delhi, India AN - OPUS4-18700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Binkowski, Sigrid A1 - Hübner, Wolfgang A1 - Aßmus, Kristin A1 - Benemann, Sigrid A1 - Österle, Werner ED - Portella, Pedro Dolabella T1 - Charakterisierung des Gefüges der austenitischen FeCrNi-Legierung 1.4876 nach Reibbeanspruchung bei 37 K T2 - Fortschritte in der Metallographie - Vortragstexte der 37. Metallographie-Tagung T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 213 EP - 218 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-3420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kloß, Heinz A1 - Österle, Werner T1 - Charakterisierung des mechanischen Reibungs- und Verschleißverhaltens von Werkstoffen mittels Simulationsrechnungen (Methode der beweglichen zellularen Automaten) und analytischer Modelle T2 - 53. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß T2 - 53. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß CY - Göttingen, Germany DA - 2012-09-24 PY - 2012 SN - 978-3-00-039201-6 VL - II SP - 4/1 EP - 4/11 CY - Aachen AN - OPUS4-26733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dörfel, Ilona A1 - Effner, Ute A1 - Glaubitz, Steffen A1 - Österle, Werner A1 - Rudolph, Edith ED - Ziegler, G. T1 - Charakterisierung hochfester ZrO2-Werkstoffe T2 - Werkstoff- und Verfahrenstechnik (Werkstoffwoche '96 Symposium 6) T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-234-8 VL - 6 SP - 691 EP - 702 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Dörfel, Ilona A1 - Gesatzke, Wolfgang A1 - Rooch, Heidemarie A1 - Urban, Ingrid T1 - Charakterisierung tribologischer Kontakte mit FIB und TEM JF - Praktische Metallographie = Practical metallography KW - FIB KW - TEM KW - Verbundwerkstoff KW - Bremse KW - Diamantschicht PY - 2004 SN - 0032-678X N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 41 IS - 4 SP - 166 EP - 179 PB - Hanser CY - München AN - OPUS4-3496 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Griepentrog, Michael A1 - Gross, Thomas A1 - Urban, Ingrid T1 - Chemical and microstructural changes induced by friction and wear of brakes JF - Wear N2 - The chemical and microstructural changes occurring during braking simulation tests at the surface of a conventional brake pad material were investigated mainly by scanning and transmission electron microscopy and surface analytical techniques. It can be shown that patches of a third body material develop, comprising a compositional mix of all constituents of the pad and iron oxides from the disk. Milled debris particles still have the crystal structure of barite, the major phase of the pad material, but the grain size is reduced drastically to the nanometer scale. The major wear mechanism is delamination of filler particles from the organic binder, supported by local degradation of the phenolic resin during asperity heating. Quartz crystals are preserved thereby adopting the function of primary contact areas. KW - Brake KW - Third body material KW - Friction layer KW - Electron microscopy PY - 2001 DO - https://doi.org/10.1016/S0043-1648(01)00785-2 SN - 0043-1648 VL - 251 SP - 1469 EP - 1476 PB - Elsevier CY - Amsterdam AN - OPUS4-2371 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Häusler, Ines A1 - Dörfel, Ilona A1 - Peplinski, Burkhard A1 - Dietrich, Paul A1 - Unger, Wolfgang A1 - Österle, Werner T1 - Comprehensive characterization of ball-milled powders simulating a tribofilm system JF - Materials characterization N2 - A model system was used to simulate the properties of tribofilms which form during automotive braking. The model system was prepared by ball milling of a blend of 70 vol.% iron oxides, 15 vol.% molybdenum disulfide and 15 vol.% graphite. The resulting mixture was characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and various transmission electron microscopic (TEM) methods, including energy dispersive X-ray spectroscopy (EDXS), high resolution investigations (HRTEM) with corresponding simulation of the HRTEM images, diffraction methods such as scanning nano-beam electron diffraction (SNBED) and selected area electron diffraction (SAED). It could be shown that the ball milling caused a reduction of the grain size of the initial components to the nanometer range. Sometimes even amorphization or partial break-down of the crystal structure was observed for MoS2 and graphite. Moreover, chemical reactions lead to a formation of surface coverings of the nanoparticles by amorphous material, molybdenum oxides, and iron sulfates as derived from XPS. KW - Tribofilm model system KW - Ball milling KW - X-ray powder diffraction KW - Transmission electron microscopy PY - 2016 DO - https://doi.org/10.1016/j.matchar.2015.11.024 SN - 1044-5803 SN - 1873-4189 VL - 111 SP - 183 EP - 192 PB - Elsevier CY - New York, NY AN - OPUS4-35051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dmitriev, A.I. A1 - Smolin, A.Y. A1 - Psakhie, S.G. A1 - Österle, Werner A1 - Kloß, Heinz A1 - Popov, V.L. T1 - Computer modeling of local tribological contacts by the example of the automotive brake friction pair JF - Physical mesomechanics N2 - In the paper the method of discrete modeling (movable cellular automata method) and combined discrete-continuous description of the simulated medium are used to analyze processes occurring in the local contact of the automotive brake system. The characteristic size of the considered region is 1.5 ?m. The following contact situation is simulated: steel fiber coated by an iron oxide film as the brake pad and pearlitic steel also coated by an iron oxide layer as the disc. On the assumption of oxide layer wearing we simulate the iron oxide - iron oxide, iron oxide - metal and metal - metal contacts. The calculation results for the friction coefficient for various contact situations give quite adequate values. For example, for the oxide - oxide system the calculated coefficient is approximately equal to 0.4, while for the metal - metal contact the obtained value varies from 0.7 to 0.9. Analysis of a set of the obtained results allows concluding that oxide is formed more rapidly than the sliding layer, which in turn makes the friction coefficient value stabilized. PY - 2008 DO - https://doi.org/10.1016/j.physme.2008.03.008 SN - 1029-9599 VL - 11 IS - 1-2 SP - 73 EP - 84 PB - Inst. of Strength Physics and Materials Science SB RAS CY - Tomsk AN - OPUS4-18698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner T1 - Controlling the microstructure of engineering materials - a measure for obtaining taylored properties T2 - Iren University of Science and Technology T2 - Iren University of Science and Technology CY - Tehran, Iran DA - 2002-05-21 PY - 2002 AN - OPUS4-6106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Urban, Ingrid A1 - Severin, D. A1 - Trepte, S. T1 - Correlations between surface modification and tribological performance of brake pads JF - Surface engineering N2 - The formation of a third body layer on a conventional friction material during braking tests was studied in some detail using TEM, SEM, and X-ray photoelectron spectroscopy (XPS) techniques. Plate shaped micro-contact areas representing a compositional mix of all components of the tribocouple and exhibiting a nanocry stalline microstructure were identified after a run-in period. PY - 2001 DO - https://doi.org/10.1179/026708401101517700 SN - 0267-0844 SN - 1743-2944 VL - 17 IS - 2 SP - 123 EP - 125 PB - Institute of Metals CY - London AN - OPUS4-2367 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cristol, A.L. A1 - Desplanques, Y. A1 - Österle, Werner A1 - Degallaix, G. T1 - Coupling between thermal localisation and friction mechanisms: heat accumulation effect T2 - JEF 2010 - 6th European conference on braking (Proceedings) N2 - Heat accumulation induced by a succession of railway brakings leads to changes of the friction conditions occurring in pad-disc contact. Infrared thermography observations show a progressive increase of surface temperature over the succession, as well as a modification of the hot band migration phenomenon. From a tribological point of view, the heat accumulation, accompanied by a wear increase, progressively modifies the friction behaviour from one braking to the next. Post-mortem observations of pads are performed on surface by scanning electron microscopy and in depth after Focus Ion Beam cut by scanning ion microscopy. Observations show that, with heat accumulation, the third body quantity rises inside the contact, in accordance with wear increase. It is concluded that source flows of third body, which increase with temperature, feed aplenty the contact and modify its load-bearing capacity. T2 - JEF 2010 - 6th European conference on braking CY - Lille, France DA - 2010-11-24 KW - Successive braking KW - Heat accumulation KW - Thermal localisation KW - Wear KW - SEM KW - FIB PY - 2010 SP - 61 EP - 69 AN - OPUS4-22729 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Seah, M.P. A1 - Spencer, S.J. A1 - Bensebaa, F. A1 - Vickridge, I. A1 - Danzebrink, H. A1 - Krumrey, M. A1 - Gross, Thomas A1 - Österle, Werner A1 - Wendler, E. A1 - Rheinländer, B. A1 - Azuma, Y. A1 - Kojima, I. A1 - Suzuki, N. A1 - Suzuki, M. A1 - Tanuma, S. A1 - Moon, D.W. A1 - Lee, H.J. A1 - Cho, H.M. A1 - Chen, H.Y. A1 - Wee, A. T. S. A1 - Osipowicz, T. A1 - Pan, J.S. A1 - Jordaan, W.A. A1 - Hauert, R. A1 - Klotz, U. A1 - van der Marel, C. A1 - Verheijen, M. A1 - Tamminga, Y. A1 - Jeynes, C. A1 - Bailey, P. A1 - Biswas, S. A1 - Falke, U. A1 - Nguyen, N.V. A1 - Chandler-Horowitz, D. A1 - Ehrstein, J.R. A1 - Muller, D. A1 - Dura, J.A. T1 - Critical review of the current status of thickness measurements for ultrathin SiO2 on Si - Part V: Results of a CCQM pilot study JF - Surface and interface analysis N2 - Results are reported from a pilot study under the Consultative Committee for Amount of Substance (CCQM) to compare measurements of and resolve any relevant measurement issues in, the amount of thermal SiO2 oxide on (100) and (111) orientation Si wafer substrates in the thickness range 1.5 - 8 nm. As a result of the invitation to participate in this activity, 45 sets of measurements have been made in different laboratories using 10 analytical methods: medium-energy ion scattering spectrometry (MEIS), nuclear reaction analysis (NRA), RBS, elastic backscattering spectrometry (EBS), XPS, SIMS, ellipsometry, grazing-incidence x-ray reflectrometry (GIXRR), neutron reflectometry and transmission electron microscopy (TEM). The measurements are made on separate sets of 10 carefully prepared samples, all of which have been characterised by a combination of ellipsometry and XPS using carefully established reference conditions and reference parameters. The results have been assessed against the National Physical Laboratory (NPL) data and all show excellent linearity. The remaining data sets correlate with the NPL data with average root-mean-square scatters of 0.15 nm, half being better than 0.1 nm and a few at or better than 0.05 nm. Each set of data allows a relative scaling constant and a zero thickness offset to be determined. Each method has an inherent zero thickness offset between 0 nm and 1 nm and it is these offsets, measured here for the first time, that have caused many problems in the past. There are three basic classes of offset: water and carbonadeous contamination equivalent to ~1 nm as seen by ellipsometry; adsorbed oxygen mainly from water at an equivalent thickness of 0.5 nm as seen by MEIS, NRA, RBS and possibly GIXRR; and no offset as seen by XPS using the Si 2p peaks. Each technique has a different uncertainty for the scaling constant and consistent results have been achieved. X-Ray photoelectron spectroscopy has large uncertainties for the scaling constant but a high precision and, critically, if used correctly, has zero offset. Thus, a combination of XPS and the other methods allows the XPS scaling constant to be determined with low uncertainty, traceable via the other methods. XPS laboratories returning results early were invited to test a new reference procedure. All showed very significant improvements. The reference attenuation lengths thus need scaling by 0.986 ± 0.009 (at an expansion factor of 2) deduced from the data for the other methods. Several other methods have small offsets and, to the extent that these can be shown to be constant or measurable, then these methods will also show low uncertainty. Recommendations are provided for parameters for XPS, MEIS, RBS and NRA to improve their accuracy. KW - Calibration KW - Ellipsometry KW - GIXRR KW - Interlaboratory study KW - MEIS KW - Neutron reflectometry KW - NRA KW - RBS KW - Silicon dioxide KW - SIMS KW - XPS PY - 2004 DO - https://doi.org/10.1002/sia.1909 SN - 0142-2421 SN - 1096-9918 VL - 36 IS - 9 SP - 1269 EP - 1303 PB - Wiley CY - Chichester AN - OPUS4-5549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jiao, Feng A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Cyclic hardening of alloy 800h under biaxial loading T2 - Stainless steels '96 T2 - International Congress Stainless Steels '96 ; 2nd European congress CY - Düsseldorf and Neuss, Germany DA - 1996-06-03 KW - Hochtemperaturtechnik KW - Beanspruchung, zyklisch KW - Stahl, austenitisch KW - Legierung 800 H PY - 1996 SN - 3-514-00601-6 SP - 292 EP - 293 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wollschläger, Nicole A1 - Tasdemir, Z. A1 - Häusler, Ines A1 - Leblebici, Y. A1 - Österle, Werner A1 - Alaca, B. E. T1 - Determination of the elastic behavior of silicon nanowires within a scanning electron microscope JF - Journal of Nanomaterials N2 - Three-point bending tests were performed on double-anchored, <110> silicon nanowire samples inside a scanning electron microscope (SEM) via a micromanipulator equipped with a piezo-resistive force sensor. Representing the upper and lower boundaries achievable in a consistent manner, silicon nanowires with widths of 35 nm and 74 nm and a height of 168 nm were fabricated. The nanowires were obtained monolithically along with their 10-m-tall supports through a top-down fabrication approach involving a series of etching processes. Hence, no interface compliance was introduced between supports and nanowires. Exact nanowire dimensions and cross-sectional features were determined by transmission electron microscopy (TEM) following sample preparation through focused ion beam (FIB) machining. Conducting the experiments inside an SEM chamber further raised the opportunity of the direct observation of any deviation from ideal loading conditions such as twisting, which was taken into consideration in simulations. Measured force-displacement behavior was observed to exhibit close resemblance to simulation results obtained by finite element modeling, when the bulk value of 169 GPa was taken as the modulus of elasticity for <110> silicon. Hence, test results show neither any size effect nor evidence of residual stresses for the considered nanoscale objects. The increased effect of the native oxide with reduced nanowire dimensions was captured as well. Thus this very simple in-situ testing method was found to be an alternative to elaborate AFM measurements on geometrically formidable nanostructures. The results demonstrate the applicability of the developed fabrication approach to the incorporation of silicon nanowires in functional micromechanical devices. KW - Silicon nanowire KW - Elastic behavior KW - Scanning electron microscope KW - Mechanical properties PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-370383 DO - https://doi.org/10.1155/2016/4905838 VL - 2016 SP - Article 4905838, 1 EP - 6 PB - Hindawi Publishing Corporation AN - OPUS4-37038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Wever, H. A1 - Bunge, H. T1 - Development of microstructure and texture of cold rolling α iron JF - Metal Science PY - 1983 SN - 0026-0681 IS - 17 SP - 333 EP - 340 PB - Maney Publ. CY - London, UK AN - OPUS4-36056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Wever, H. A1 - Bunge, H. T1 - Development of microstructure and texture of cold-rolled a iron JF - Metal science N2 - Optical and electron metallography have been used to investigate the development of different microstructures in Armco Fe after rolling reductions between 0 and 90%. Simultaneously, the orientation distribution functions have been calculated from pole figures obtained by X-ray diffraction. Different stages of texture development could be assigned to typical microstructures. Strain inhomogeneities, such as microbands and shear bands, caused some broadening of the texture and a slight deviation of one skeleton line from the predicted fibre texture component. The decomposition of orientations near {111} < 121 > , and the strengthening of {211} < 011 > after high rolling reductions, was not due to mechanical twinning but could rather be explained by assuming {211} < 111 > slip. 30 ref.--AA PY - 1983 DO - https://doi.org/10.1179/030634583790420772 SN - 0306-3453 SN - 0026-0673 VL - 17 SP - 333 EP - 340 PB - Metals Society CY - London AN - OPUS4-2389 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Li, Pengxi T1 - Development of nanocrystalline microstructures in nickel-base superalloys by grinding and mechanical alloying T2 - European Congress on Electron Microscopy T2 - 10th European Congress on Electron Microscopy (EUREM) CY - Granada, Spain DA - 1992-09-07 PY - 1992 SP - 313 EP - 314 CY - Stockholm AN - OPUS4-2472 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frohberg, G. A1 - Olschewski, Jürgen A1 - Österle, Werner A1 - Wahi, R.P. A1 - Wever, H. A1 - Ziebs, Josef T1 - Die Superlegierung IN 738 LC: Ihr Verfestigungs- und Verformungsverhalten JF - Forschung aktuell PY - 1993 SN - 0176-263X VL - 39-41 IS - 10 SP - 28 EP - 35 PB - Presse- u. Informationsreferat d. TU CY - Berlin AN - OPUS4-2476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Blümel, G. A1 - Wever, H. T1 - Die Walztextur von hochreinem Eisen JF - Materialprüfung = Materials testing PY - 1977 SN - 0025-5300 VL - 19 IS - 8 SP - 347 EP - 350 PB - Carl Hanser Verlag CY - München AN - OPUS4-2386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Gesatzke, W. T1 - Dislocation particle interaction during secondary hardening and yielding of HSLA steel T2 - Proceedings 4th Riso International Symposium on Metallurgy and Material Science T2 - Riso International Symposium on Metallurgy and Material Science CY - Roskilde, Denmark DA - 05.09.1983 PY - 1983 SP - 473 EP - 478 AN - OPUS4-36051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Gesatzke, Wolfgang ED - Bilde-Sørensen, J. T1 - Dislocation-particle interaction during secondary hardening and yielding of HSLA steel T2 - Deformation of multi-phase and particle containing materials T2 - 4th International Symposium on Metallurgy and Materials Science ; 4th International Symposium on Deformation of Multi-phase and Particle Containing Materials CY - Risø, Denmark DA - 1983-09-05 PY - 1983 SN - 87-550-0946-8 VL - 4 SP - 473 EP - 478 PB - Risø National Laboratory CY - Roskilde AN - OPUS4-2391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Dmitriev, A.I. A1 - Kloß, Heinz T1 - Does ultra-mild wear play any role for dry friction applications, such as automotive braking? JF - Faraday discussions N2 - Nanostructured third body films and/or storage of wear debris at the surfaces of the first bodies are deemed as prerequisites of sliding under ultra-mild wear conditions. Since such features have been observed experimentally on brake pads and discs, attempts were undertaken to study their sliding behaviour by modelling on the nanoscopic scale with an approach based on Movable Cellular Automata (MCA). The model rendered the possibility to study the influence of different nanostructures systematically and to assess the impact of different brake pad ingredients on the sliding behaviour, velocity accommodation and friction force stabilization at a sliding contact. Besides providing a review on previously published modelling results, some additional new graphs enabling better visualization of dynamic processes are presented. Although ultra-mild wear conditions were considered to be essential for achieving the desired tribological properties, transitions to mesoscopic and macroscopic wear mechanisms were studied as well. The final conclusion is that ultra-mild wear and corresponding smooth sliding behaviour play an important role during automotive braking, even though temporarily and locally events of severe wear may cause friction instabilities, surface damage and release of coarse wear particles. KW - Dry friction KW - Ultra-mild wear KW - Third body KW - MCA-model KW - Simulation PY - 2012 DO - https://doi.org/10.1039/c2fd00117a SN - 1359-6640 SN - 1364-5498 VL - 156 IS - 0 SP - 159 EP - 171 PB - Soc. CY - Cambridge [u.a.] AN - OPUS4-26822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -