TY - CONF A1 - Wagner, Jan T1 - This is the Way: An Evidence Based Route to Phytic-acid-based Flame Retardant Poly(lactide acid) N2 - Main message: This study provides an evidence-based route to flame retard poly (lactide acid) (PLA) with phytic acid (Phyt)-based flame retardants (FR). Phyt was prepared with lignin (Lig) and expandable graphite (EG). Three amine salts (arginine (Arg), piperazine (Pip), melamine (Mel)) were also synthesized with Phyt. Findings include UL 94 V0 classification, limited oxygen index (LOI) = 43.7 vol% and reduced total heat released (THR), while molecular weight (MW) was not affected. Combinations lead to the most effective FR. Introduction: As demand for biobased polymers increases, biobased FRs remain scarce in the market. With 28 wt.% P, Phyt is promising to be a biobased FR, but Phyt efficiency as a FR needs to be improved. [1] Furthermore, as a strong acid, it esterifies and hydrolysis PLAs backbone. With the combinations proposed in this study, processability and MW in PLA compounds were untouched, while FR performance of Phyt was enhanced. Experimental: Compounds analyzed in this study were: PLA, PLA Lig, PLA EG, PLA PhytLig, PLA PhytEG, PLA Mel, PLA PhytArg, PLA PhytPip, PLA PhytMel, PLA PhytMel Lig and PLA PhytMel EG. Addition of Phyt based FR was 16.7 wt.%, Lig and EG 10wt.%. Compounds were processed with twin screw extrusion, injection molding and hot press. Analysis was done with size exclusion tomography, differential scanning calorimetry (DSC), tensile strength, cone calorimeter, UL 94, LOI and thermogravimetry analysis (TGA) combined with Fourier transformation infrared spectroscopy (FTIR). Residues were analyzed with scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Results and Discussion: To synthesize the FR, Lig and Phyt (solved in water) were mixed and dried. A solid material formed, which was grinded and then compounded with PLA. The same was done with EG. Phyt + Arg/Pip/Mel FR materials were each titrated to a pH of ~4.5, since this pH is known to be least harmful for the PLA backbone. For PhytMel a salt precipitated. PhytPip and PhytArg were dried and a resin-like structure was obtained, which was grinded to a powder. The molar mass distribution of PLA PhytArg (10,000 g/mol – 600,000 g/mol) is similar to PLAs ranging from 15,000 g/mol – 600,000 g/mol. MW distribution from highest to lowest was PLA > PLA PhytArg > PLA PhytMel > PLA PhytMel EG > PLA PhytMel Lig > PLA PhytEG > PLA PhytLig > PLA PhytPip. The reaction between Phyt and Arg/Mel prevents MW decomposition of PLA through a reaction of P acid and NH2 groups. Tensile strength declined to 35.9 MPA for PLA PhytMel and 32.1 MPA for PLA PhytArg, compared to 51.4 MPA for PLA. DSC analysis revealed TG was not affected for the FR compounds: Phyt Lig/EG/Arg/Mel, compared to PLA. PLA PhytMel crystallinity 𝐾∆𝐻𝑐𝑐𝑐𝑐 was 30%, PLA PhytArg crystallinity was 50%, compared to PLA 𝐾∆𝐻𝑐𝑐 was 46%. Melting peaks were not affected in PLA Phyt Arg/Mel. Flammability investigations lead to results of LOI 25.8 vol%/ UL 94 V2 classification in PLA, PLA PhytArg LOI 43.7 vol%/ UL 94 V2, due to strong dripping as a cooling mode of action. [2] PLA PhytMel burned with intumescent char and LOI 38.2 vol%/ UL 94 V2 was measured. Due to strong melt dripping, PLA PhytPip reached UL 94 V0. TGA revealed increased residue for all FR compounds. When materials were combined in PLA PhytMel EG residue was maximized to 19.9 wt.% (600°C, 𝑁𝑁2 atmosphere). FTIR analysis revealed PO and PH stretching vibrations, indicating radical scavenging. Cone calorimeter investigations of PLA, PLA PhytPip and PLA PhytArg lead to a steep incline in HRR to peak heat release rate (pHRR). Values are provided in Table 1. PLA PhytMel containing compounds exhibited prolonged burning and protective layer. PLA PhytLig, PLA PhytEG, PLA Mel (pHRR >1000) were investigated but proved inferior to PLA PhytMel, PLA PhytMel Lig and PLA PhytMel EG. THR was reduced in all Phyt compounds. Intumescence was observed in all compounds except for PLA Lig, PLA PhytLig and PLA PhytMel Lig. PLA PhytMel EG proved as the most effective compound in fire testing with a firm, coherent and intumescent char structure. This study provides an understanding of Phyt as a FR. It systematically improves Phyts effectiveness and processability in PLA. This evidence T2 - 20th European Meeting on Fire Retardant Polymeric Materials (FRPM2025) CY - Madrid, Spain DA - 03.06.2025 KW - Polylactide acid KW - Intumescence KW - Phosphorous flame retardant KW - Phytic acid PY - 2025 AN - OPUS4-63395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ocker, L. A1 - Lisec, Jan A1 - Seitz, G. A1 - Adamus, A. A1 - Hempfling, L. A1 - Wagner, B. A1 - Vahdad, R. A1 - Verburg, F. A. A1 - Luster, M. A1 - Schurrat, T. A1 - Bier, D. A1 - Frank, M. A1 - Engel, N. T1 - Hypericin and its radio iodinated derivatives – A novel combined approach for the treatment of pediatric alveolar rhabdomyosarcoma cells in vitro N2 - In this in vitro study, we got a first insight of a possible potential of Hypericin for the treatment of pediatric soft tissue sarcoma. By coupling with radioiodine, we developed a novel approach for a combined anti-tumor treatment. The in vitro experiments lay the foundation for further in vivo experiments, which are needed to study the effects of a sequential administration of 131I-HYP and HYP. KW - Mass-Spectrometry KW - Cancer PY - 2020 VL - 29 SP - 101588 PB - Elsevier B.V. AN - OPUS4-49601 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurzler, Nina A1 - Schutter, Jan David A1 - Wagner, R. A1 - Dimper, Matthias A1 - Lützenkirchen-Hecht, D. A1 - Özcan Sandikcioglu, Özlem T1 - Abundance of Fe(III) during cultivation affects the microbiologically influenced corrosion (MIC) behaviour of iron reducing bacteria Shewanella putrefaciens N2 - The effect of the presence of Fe(III) during the cultivation on the electrochemical activity and corrosion behaviour of dissimilatory iron reducing bacteria Shewanella putrefaciens was studied by means of ex situ and in situ X-ray absorption near-edge spectroscopy (XANES). Stainless steel AISI 304 and thin iron films were studied as substrates. XANES analysis indicated an accelerated iron dissolution and growth of an oxide/hydroxide film for the culture grown with Fe(III) in comparison to the culture grown in absence of Fe(III). Electrochemical Analysis indicated that the biofilm resulted in acceleration of the general corrosion but provides protection against local corrosion. KW - Stainless Steel KW - XANES KW - Iron KW - Cyclic Voltammetry KW - Microbiological Corrosion PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-513788 DO - https://doi.org/10.1016/j.corsci.2020.108855 VL - 174 SP - 108855 PB - Elsevier Ltd. AN - OPUS4-51378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurzler, Nina A1 - Schütter, Jan David A1 - Wagner, R. A1 - Dimper, Matthias A1 - Hodoroaba, Vasile-Dan A1 - Lützenkirchen-Hecht, D. A1 - Özcan Sandikcioglu, Özlem T1 - Preconditioning of AISI 304 stainless steel surfaces in the presence of flavins—Part II: Effect on biofilm formation and microbially influenced corrosion processes N2 - Biofilm formation and microbially influenced corrosion of the iron-reducing microorganism Shewanella putrefaciens were investigated on stainless steel surfaces preconditioned in the absence and presence of flavin molecules by means of XANES (X-ray absorption near-edge structure) analysis and electrochemical methods. The results indicate that biofilm formation was promoted on samples preconditioned in electrolytes containing minute amounts of flavins. On the basis of the XANES results, the corrosion processes are controlled by the iron-rich outer layer of the passive film. Biofilm formation resulted in a cathodic shift of the open circuit potential and a protective effect in terms of pitting corrosion. The samples preconditioned in the absence of flavins have shown delayed pitting and the samples preconditioned in the presence of flavins did not show any pitting in a window of −0.3- to +0.0-V overpotential in the bacterial medium. The results indicate that changes in the passive film chemistry induced by the presence of minute amounts of flavins during a mild anodic polarization can change the susceptibility of stainless steel surfaces to microbially influenced corrosion. KW - Biofilms KW - XANES KW - Microbially influenced corrosion (MIC) PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-528130 DO - https://doi.org/10.1002/maco.202012192 VL - 72 IS - 6 SP - 983 EP - 994 PB - Wiley AN - OPUS4-52813 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wagner, Jan A1 - Häfner, P. A1 - Reimann, H.-A. A1 - Schartel, Bernhard T1 - Valorization of Natural Fibers in Flame Retarded Poly(lactic acid) N2 - Extensive research has explored natural fiber reinforced composites, typically focusing on a single fiber within a polymer matrix. Comprehensive comparisons across different natural fibers in the same polymer, which are critical for industrial material selection, remain limited. This work presents a systematic comparison of untreated hemp, flax, and sisal fibers incorporated at varying fiber lengths and loadings into flame retarded poly(lactic acid) (PLA). Fire behavior, thermal, and mechanical responses were investigated through thermogravimetry, UL 94, and cone calorimetry, alongside crystallinity, molecular weight (MW), and microstructural analysis. Fiber incorporation reduced the peak heat release rate (pHRR) by up to 30 % in 30 wt% hemp, attributed to protective layer formation, but increased flammability in UL 94. A phytic acid melamine salt combined with expandable graphite and 20 wt% hemp produced incomplete combustion at 50 kW/m², raising char residue from 4 to 24 wt% and halving pHRR. Petrella plots revealed that fiber addition alone lowered fire load and flashover propensity as effectively as phytic acid melamine; with hemp, phytic acid and expendable graphite, the flashover hazard and fire load were halved. MW was preserved while crystallinity and modulus increased with fiber content. Hemp delivered the most consistent reinforcement, while optimized processing enabled flax and sisal to improve stiffness. Performance gains were strongest when individual fibers were dispersed via optimized processing, preventing bundle fracture under load. Plasma modification of the fibers improved the maximum tensile strength in the composites. A practical guide is provided for valorizing natural fibers in PLA composites, demonstrating routes to bio-based, compostable materials with improved fire safety and mechanical performance suitable for industrial processing. KW - Poly(lactic acid) KW - Hemp KW - Sisal KW - Flax KW - Flame retardant KW - Phytic acid PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653038 DO - https://doi.org/10.1016/j.mtcomm.2025.114575 SN - 2352-4928 VL - 50 SP - 1 EP - 41 PB - Elsevier Ltd. AN - OPUS4-65303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wagner, Jan A1 - Dudziak, Mateusz A1 - Falkenhagen, Jana A1 - Rockel, Daniel A1 - Reimann, H.-A A1 - Schartel, Bernhard T1 - This is the way: An evidence based route to phytic-acid–based flame retardant poly(lactide acid) N2 - A systematic sequence of materials was investigated to develop phytic-acid (Phyt)–based flame retarded poly (lactide acid) (PLA), while factoring in molecular weight (MW), crystallinity and mechanical properties. Synergistic approaches were developed based on combinations with lignin and expandable graphite (EG), as well as by applying different Phyt salts of melamine (Mel), piperazine (Pip), and arginine (Arg). Compounds were twin screw extruded, injection molded, hot pressed and investigated with thermal analysis, size exclusion chromatography, infrared spectroscopy, tensile testing, limited oxygen index (LOI), UL 94, cone calorimeter, and scanning electron microscope. 16.7 wt.% flame retardant (FR) slightly enhances crystallization while MW remains unchanged in PLA Phyt Arg and PLA Phyt Mel. LOI was improved to 43.7 vol.% for PLA Phyt Arg, UL 94 V0 achieved for PLA Phyt Pip. Cone calorimeter results show total heat evolved reduced by 14 %, maximum average rate of heat emission 43 % lower, and peak heat release rate reduced by 50 % for PLA Phyt Mel. Phyt Mel combined with EG increased the char yield of PLA to 20 wt.% and 15.5 wt.% at 600 and 900 ◦C, respectively. Phyt is exploited to enhance char yield, stabilize the intumescent char, and lower the apparent effective heat of combustion. The combination of Phyt Mel and EG was proposed as an efficient FR for PLA via an evidence based developing route. KW - Polylactide acid KW - Intumescent flame retardant KW - Phosphorous flame retardant KW - Phytic acid KW - Expandable graphite KW - Melamine PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626395 DO - https://doi.org/10.1016/j.polymdegradstab.2025.111242 SN - 1873-2321 SN - 0141-3910 VL - 234 SP - 1 EP - 14 PB - Elsevier Ltd. AN - OPUS4-62639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -