TY - CONF A1 - Burkert, Andreas A1 - Müller, Thoralf A1 - Modersohn, W. A1 - Busch, W.-B. T1 - Innovation und Sicherheit im Bauwesen durch Einsatz von Duplexstahl N2 - Der Einsatz von nichtrostenden Duplexstählen im Bauwesen findet in den letzten Jahren zu-nehmende Verbreitung. Insbesondere die Lean-Duplexstähle sind aufgrund geringerer not-wendiger Legierungszuschläge von Nickel und Molybdän eine kostengünstigere Alternative zu den jahrzehntelang etablierten austenitischen Stahlsorten. Verschiedene Korrosionsuntersu-chungen an der BAM sowie Erfahrungen aus der Anwendung konnten nachweisen, dass Lean-Duplexstähle unter verschiedenen Einsatzbedingungen ein vergleichbar gutes, in man-chen Fällen sogar besseres Korrosionsverhalten aufweisen als austenitische Referenzwerkstoffe der gleichen Korrosionswiderstandsklasse. Im Hinblick auf die technisch-mechanischen Eigenschaften konnten von der Fa. Modersohn initiierte Untersuchungen zeigen, dass unter Beachtung der gefügebedingten Einsatzgrenzen eine gute Verarbeitbarkeit und mechanische Sicherheit bei gleichzeitiger Materialeinsparung gewährleistet werden kann. Die positiven Ver-suchsergebnisse haben wesentlich zur Akzeptanz und einer damit einhergehenden Erweiterung der Einsatzgebiete dieser alternativen Werkstoffe im Bauwesen beigetragen. T2 - GfKorr-Jahrestagung 2016 CY - Frankfurt/Main, Germany DA - 15.11.2016 KW - Duplexstähle KW - Bauwesen KW - Korrosionsbeständigkeit KW - Kerbschlagzähigkeit PY - 2016 SN - 978-3-935406-63-5 VL - 2016 SP - 82 EP - 95 PB - DECHEMA e.V. CY - Frankfurt/Main AN - OPUS4-38663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoesl, Simone A1 - Neumann, B. A1 - Techritz, Sandra A1 - Sauter, G. A1 - Simon, R. A1 - Schlüter, H. A1 - Linscheid, M. W. A1 - Theruing, F. A1 - Müller, Larissa A1 - Jakubowski, Norbert T1 - Internal standardization of LA-ICP-MS immunoimaging via printing of universal metal spiked inks onto tissue sections N2 - Formalin-fixed paraffin-embedded (FFPE) specimen from biopsy materials are a widespread sample format for pathologists and medical researchers. Pathologists are archiving vast numbers of FFPE samples which can be stored for decades. Conventional immunohistochemical staining (IHC) of biomarkers on FFPE tissue sections is one of the most important analytical techniques for cancer diagnosis and pathology in general. However standardization for IHC samples and quality management is tedious and differs significantly from clinic to clinic. Combining established IHC staining strategies with modern mass spectrometry mediated methods would increase it`s potential and enable access of large FFPE archives for multiplexed quantitation purposes. In this work element mass spectrometry and a new ink-jet printed internal standardization approach was successfully combined with IHC staining to facilitate quantitative multiplex assays for archived FFPE samples. The printing strategy improves elemental image resolution and reproducibility of paraffin embedded breast cancer tissue sections in laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) using conventional IHC staining as a model system to investigate the new capabilities of this technique. For the internal standardization we applied a conventional CD-ink-jet printer to print a metal spiked ink onto the top of thin layer tissue sections with constant density. Printing was carried out in a direct comparison to an iodination of the tissue section as previously described as an alternative standardization method. The use of the printed internal standard allowed correction of the fluctuation during the laser ablation process and compensated instrumental drift effects. Mediated by the ink correction approach we achieved better signal-to-background-ratios (SBR) of 74 and better spatial resolution of 30 µm compared to iodination (SBR=23). This improved performance was demonstrated on tumorous areas in FFPE breast cancer tissue sections and allowing detection of Her-2 in tumorous areas of this tissue with significantly improved contrast. KW - Internal standardization KW - LA-ICP-MS KW - Immuno imaging PY - 2016 DO - https://doi.org/10.1039/c5ja00409h SN - 0267-9477 SN - 1364-5544 VL - 31 IS - 3 SP - 801 EP - 808 AN - OPUS4-35711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Torge, Manfred A1 - Bücker, Michael A1 - Drachenberg, E. A1 - Müller, W. A1 - Schaaf, U. ED - Roemich, H. ED - Fair, L. T1 - Protection of stained-glass windows - case studies in Poland N2 - Several restoration projects of stained-glass windows have been performed in Lower Silesia (Poland) since 2010. The aim of the projects was to protect stained-glass windows against environmental impact of industial pollutants and acid rain by installing a protective glazing. The usefulness of protective glazing has been proved by climate measurements and determination of environmental impact before and after installation. T2 - Recent Advances in Glass and Ceramics Conservation 2016, ICOM-CC Working Group “Glass and Ceramics” Interim Meeting CY - The Eugeniusz Geppert Academy of Art and Design, Wrocław, Poland DA - 25.05.2016 KW - weathering KW - stained glass KW - protective glazing KW - glass dosimeters KW - outdoor pollutants PY - 2016 SN - 978-83-64419-80-5 SP - 53 EP - 62 PB - International Council of Museums - Committee for Conservation (ICOM-CC) CY - Paris, France AN - OPUS4-36678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gers-Panther, C.F. A1 - Fischer, H. A1 - Nordmann, J. A1 - Seiler, T. A1 - Behnke, Thomas A1 - Würth, Christian A1 - Frank, W. A1 - Resch-Genger, Ute A1 - Müller, T.J.J. T1 - Four- and Five-Component Syntheses and Photophysical Properties of Emission Solvatochromic 3‑Aminovinylquinoxalines N2 - 3-Aminovinylquinoxalines are readily accessible from (hetero)aryl glyoxylic acids or heterocyclic π-nucleophiles by consecutive four- and fivecomponent syntheses in the sense of an activation-alkynylation-cyclocondensation-addition sequence or glyoxylation-alkynylation-cyclocondensation-addition sequence in good yields. The title compounds are highly fluorescent with pronounced emission solvatochromicity and protochromic fluorescence quenching. Time-resolved fluorescence spectroscopy furnishes radiative and nonradiative fluorescence decay rates in various solvent polarities. The electronic structure is corroborated by DFT and TD-DFT calculations rationalizing the observed spectroscopic effects. KW - Dye KW - Syntheseis KW - Spectroscopy PY - 2016 DO - https://doi.org/10.1021/acs.joc.6b02581 SN - 0022-3263 VL - 82 SP - 567 EP - 578 PB - ACS Publications AN - OPUS4-39211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tötzke, C. A1 - Gaiselmann, G. A1 - Osenberg, M. A1 - Arlt, Tobias A1 - Markötter, Henning A1 - Hilger, A. A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Schmidt, V. A1 - Lehnert, W. A1 - Manke, I. T1 - Influence of hydrophobic treatment on the structure of compressed gas diffusion layers N2 - Carbon fiber based felt materials are widely used as gas diffusion layer (GDL) in fuel cells. Their transport properties can be adjusted by adding hydrophobic agents such as polytetrafluoroethylene (PTFE). We present a synchrotron X-ray tomographic study on the felt material Freudenberg H2315 with different PTFE finishing. In this study, we analyze changes in microstructure and shape of GDLs at increasing degree of compression which are related to their specific PTFE load. A dedicated compression device mimicking the channel-land pattern of the flowfield is used to reproduce the inhomogeneous compression found in a fuel cell. Transport relevant geometrical parameters such as porosity, pore size distribution and geometric tortuosity are calculated and consequences for media transport discussed. PTFE finishing results in a marked change of shape of compressed GDLs: surface is smoothed and the invasion of GDL fibers into the flow field channel strongly mitigated. Furthermore, the PTFE impacts the microstructure of the compressed GDL. The number of available wide transport paths is significantly increased as compared to the untreated material. These changes improve the transport capacity liquid water through the GDL and promote the discharge of liquid water droplets from the cell. KW - Gas diffusion layer KW - Synchrotron Tomography KW - Compression KW - Hydrophobic treatment KW - Water transport PY - 2016 DO - https://doi.org/10.1016/j.jpowsour.2016.05.118 SN - 0378-7753 VL - 324 SP - 625 EP - 636 PB - Elsevier CY - Amsterdam AN - OPUS4-36918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Abali, B. E. A1 - Wu, Cheng-Chieh A1 - Müller, W.H. T1 - An energy-based method to determine material constants in nonlinear rheology with applications N2 - Many polymer-type materials show a rate-dependent and nonlinear rheological behavior. Such a response may be modeled by using a series of spring-dashpot systems. However, in order to cover different time scales the number of systems may become unreasonably large. A more appropriate treatment based on continuum mechanics will be presented herein. This approach uses representation theorems for deriving material equations and allows for a systematic increase in modeling complexity. Moreover, we propose an approach based on energy to determine thematerial parameters.This method results in a simple linear regression problemeven for highly nonlinearmaterial equations. Therefore, the inverse problem leads to a unique solution. The significance of the proposed method is that the stored and dissipated energies necessary for the procedure are measurable quantities. We apply the proposed method to a 'semi-solid' material and measure its material parameters by using a simple-shear rheometer. KW - Material equations KW - Constitutive relations KW - Nonlinear rheology KW - Simple-shear rheometer KW - Inverse analysis PY - 2016 DO - https://doi.org/10.1007/s00161-015-0472-z SN - 0935-1175 SN - 1432-0959 VL - 28 IS - 5 SP - 1221 EP - 1246 PB - Springer CY - Berlin AN - OPUS4-34333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -