TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Systematisierung der Alterungsvorgänge bei der Bewitterung von Polymerwerkstoffen T2 - 38. Jahrestagung der GUS CY - Stutensee-Blankenloch/Karlsruhe, Deutschland DA - 2009-03-18 KW - Witterungsbeständigkeit KW - Photochemische Alterung PY - 2009 SN - 978-3-9810472-7-1 SP - 51 EP - 60 CY - Pfinztal (Berghausen) AN - OPUS4-19162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Correlations in weathering results T2 - 4th European weathering symposium - Natural and artificial ageing of polymers CY - Budapest, Hungary DA - 2009-09-16 KW - Witterungsbeständigkeit KW - Korrelation KW - Künstliche Bewitterung KW - Artificial weathering PY - 2009 SN - 978-3-9810472-8-8 IS - Publication 11 SP - 251 EP - 261 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-20020 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Moeller, E. T1 - Entwicklung künstlicher Bewitterungstests für Lacke und Beschichtungen T2 - GfKORR-Seminar Korrelation von Labortests mit Praxisbedingungen im Automobilbereich CY - Frankfurt am Main, Deutschland DA - 0008-02-15 KW - Künstliche Bewitterung KW - Freibewitterung KW - Verkürzung KW - Beschleunigung KW - Korrelation PY - 2006 SN - 3-935406-27-4 SP - 102 EP - 111 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-12065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Aussagekraft von Korrelationskoeffizienten T2 - 38. Jahrestagung der GUS CY - Stutensee-Blankenloch/Karlsruhe, Deutschland DA - 2009-03-18 KW - Witterungsbeständigkeit KW - Korrelation KW - Künstliche Bewitterung PY - 2009 SN - 978-3-9810472-7-1 SP - 61 EP - 70 CY - Pfinztal (Berghausen) AN - OPUS4-19161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Zäh, M. A1 - Schönlein, A. A1 - Reichert, T. T1 - Polypropylene life time estimation by developing dose response functions with respect to irradiation and temperature - ViPQuali project T2 - 8th International symposium on weatherability (8th ISW) CY - Tokyo, Japan DA - 2010-10-14 KW - Life time estimation KW - Weathering KW - Polypropylene KW - Spectral sensitivity KW - Temperature PY - 2010 SN - 1346-0633 VL - 22 SP - 58 EP - 63 PB - Uni Publishers Co., Ltd. AN - OPUS4-22182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Grundsätzliches zur witterungsbedingten Alterung von Polymerwerkstoffen T2 - SKZ-Fachtagung "Bewitterung von Kunststoffen und Lacken in der Automobilindustrie" CY - Würzburg, Deutschland DA - 2005-02-16 KW - Witterung KW - Alterung KW - Klima KW - Vorgeschichte KW - Prüfverfahren KW - Prüfgeräte PY - 2005 SP - 36 Seiten PB - SKZ CY - Würzburg AN - OPUS4-7099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, P. ED - Ziegahn, K.-F. T1 - Messung der effektiven UV-Bestrahlung bei der Bewitterung von Polymeren N2 - Bei der Bestrahlung und Bewitterung von polymeren Werkstoffen wird die Degradation durch eine Absorption von Strahlung initiiert und meistens durch weitere Klimagrößen, wie z.B. Wärme, Feuchte und atmosphärische Gase beeinflusst. Die Messung einer effektiven Bestrahlungsstärke und ihre zeitliche Integration sind deshalb von großer Bedeutung und zwar sowohl für die Kontrolle der Funktion des Bewitterungs- oder Bestrahlungsgerätes als auch als zusätzliche Angabe der wirkenden Beanspruchung. Photochemische Prozesse werden beim Sehen oder allgemeiner bei Farbstoffen schon durch sichtbare (VIS) Strahlung, dagegen bei der Erythembildung der Haut und der Photodegradation von Polymeren erst durch die energiereicheren Photonen der ultravioletten (UV) Strahlung initiiert. Die spektrale Empfindlichkeit des Auges und die Erythembildung sind im VIS- bzw. UV-Bereich sehr stark wellenlängenabhängig, was durch die Angabe der mit der spektralen Hellempfindlichkeit V(λ) des Auges bewerteten VIS-Strahlung in Lux (lx) bzw. die mit der Erythem-Wirkfunktion Serythem bewertete UV Strahlung als dimensionsloser UV-Index berücksichtigt wird. Spektrale Empfindlichkeiten. Die Photodegradation von Polymeren ist im UV-Bereich ebenfalls stark wellenlängenabhängig, was bisher bei der radiometrischen UV-Messung nicht berücksichtigt wurde. Seit Mitte der 70er Jahre, als die lx- bzw lxh- Messung bei der Strahlungsbeanspruchung langsam durch die Ermittlung der radiometrischen UV-Bestrahlungsstärke bzw. der UV-Bestrahlung im gesamten UV-Bereich abgelöst wurde, gab es hier bei der Bewitterungsprüfung keine weiteren Fortschritte auf dem Gebiet der Charakterisierung der Strahlungsbeanspruchung im UV-Bereich. Seit Jahren liegen zahlreiche Ergebnisse über die spektrale Empfindlichkeit von Photo-degradationsprozessen vor, die zeigen, dass die spektrale Empfindlichkeit im Bereich der Globalstrahlung an der kurzwelligen Grenze bei ca. 300 nm, am größten ist und im langwelligen UV-Bereich bei ca. 400 nm gegen Null geht. Die Messungen der radiometrischen Größen UV-Gesamtbestrahlungsstärke und UV-Gesamtbestrahlung erfasst deshalb über weite Wellenlängenbereiche Strahlungsanteile, die für die Photodegradation bedeutungslos sind und mittelt über potenziell bedeutsame Änderungen im kurzwelligen UV-Bereich hinweg. Es wird das Konzept eines neuen UV-Radiometers vorgestellt, dessen spektrale Empfindlichkeit einer mittleren spektralen Empfindlichkeit der Photodegradation von Polymeren entspricht. Die effektive UV-Bestrahlungsstärke und UV-Bestrahlung kann dadurch wesentlich genauer erfasst werden. T2 - 48. Jahrestagung der GUS 2019 CY - Stutensee, Germany DA - 27.03.2019 KW - UV-Bestrahlungsstärke PY - 2019 SN - 978-3-9818507-3-4 SP - 89 EP - 100 AN - OPUS4-47896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter T1 - Principles and Limitations in the Acceleration of Artificial Weathering Tests T2 - 6th International Paint, Varnish, Ink & Auxiliary Products Industry Congress & Exhibition, 2006 Paint CY - Istanbul, Turkey DA - 2006-05-17 KW - Bewitterung KW - Verkürzung KW - Zeitraffung KW - Weathering KW - Shortening KW - Time-lapse PY - 2006 SN - 994-489125-8 SP - 48 EP - 54 PB - TMMOB CY - Istanbul AN - OPUS4-12391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter ED - Ziegahn, K.-F. T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der GUS 2006 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2006-03-22 PY - 2006 SN - 3-9810472-0-6 SP - 165 EP - 175 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Reference materials for weathering tests T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Referenzmaterialien KW - Bewitterung PY - 2003 SN - 3-9808382-3-4 SP - 1(?) EP - 11(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Frage der "UV-Beständigkeit" bzw. der "Lichtbeständigkeit" polymerer Werkstoffe T2 - 42. Jahrestagung der Gesellschaft für Umweltsimulation, GUS. "Umwelteinflüsse erfassen, simulieren, bewerten" CY - Stutensee, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-27914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Determination of the spectral response of polymers T2 - 3rd Service Life Symposium CY - Sedona, AZ, USA DA - 2004-02-01 KW - Spectral sensitivity KW - Weathering KW - UV KW - Action spectra KW - Activation spectra KW - Stabilizer KW - Spektrale Empfindlichkeit KW - Bewitterung KW - Aktivierungsspektrum KW - Wirkungsspektrum KW - Stabilisator PY - 2005 SN - 0-934010-60-9 SP - 241 EP - 253 PB - Federation of Societies for Coatings Technology CY - Philadelphia AN - OPUS4-13711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, Peter T1 - Grundsätzliches zur Verfahrensauswahl bei der künstlichen Bestrahlung und Bewitterung KW - Bewitterung KW - Bestrahlung KW - Fluoreszenzlampe KW - Xenonlampe PY - 2008 SN - 978-3-9810472-6-4 SP - 109 EP - 121 AN - OPUS4-17338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Zieghahn, K. T1 - Grundsätzliches zur Lebensdauervorhersage in der Bewitterung T2 - Umwelteinflüsse erfassen, simulieren, bewerten : 34. Jahrestagung der GUS 2005 CY - Pfinztal bei Karlsruhe, Deutschland DA - 2005-03-02 KW - Lebensdauer KW - Bewitterung KW - Polymere PY - 2005 SN - 3-9808382-6-9 SP - 159 EP - 168 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal AN - OPUS4-7141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter ED - Ziegahn, K.-F. T1 - Ermittlung der Beanspruchung bei Bewitterungsversuchen - Referenzmaterialien T2 - 33. Jahrestagung der GUS 2004 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Pfinztal, Deutschland DA - 2004-03-17 PY - 2004 SN - 3-9808382-4-2 SP - 165 EP - 175 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21346 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Veränderung der Kratzbeständigkeit und der Reflow-Fähigkeit von Automobil-Klarlacken durch Bewitterung T2 - DFO Qualitätstage 2005, "Moderne Verfahren zur Oberflächencharakterisierung" der Deutschen Forschungsgesellschaft für Oberflächenbehandlung e. V. CY - Berlin, Germany DA - 2005-10-25 PY - 2005 AN - OPUS4-12505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der Gesellschaft für Umweltsimulation (GUS), "Umwelteinflüsse erfassen, simulieren, bewerten" am Fraunhofer Institut für Chemische Technologie (ICT) CY - Pfinztal, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Entwicklung künstlicher Bewitterungstests für Lacke und Beschichtungen T2 - GfKORR-Seminar "Korrelation von Labortests mit Praxisbedingungen im Automobilbereich" der Gesellschaft für Korrosionsschutz e. V. CY - Frankfurt am Main, Germany DA - 2006-02-15 PY - 2006 AN - OPUS4-12111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spektrale Empfindlichkeit der Photoalterung von Lacken und Kunststoffen T2 - Fachtagung "Bewitterung von Kunststoffen und Lacken in der Automobilindustrie" des Süddeutschen Kunststoff-Zentrums CY - Würzburg, Germany DA - 2007-02-07 PY - 2007 AN - OPUS4-15904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Notwendigkeit der Erfassung klimatischer Einflüsse auf Transportbehälter aus Kunststoff T2 - CEEES Kongress 2007, "Umweltsimulation in der Produktentwicklung" CY - Nuremberg, Germany DA - 2007-05-22 PY - 2007 AN - OPUS4-15905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Artificial weathering including acidic deposition T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterung von Polymeren durch Witterungsbeanspruchung T2 - 25. Darmstädter Kunststoff-Kolloquium, "Schadensanalytik heute - Methoden und Anwendungen" CY - Darmstadt, Germany DA - 2009-09-10 PY - 2009 AN - OPUS4-20573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Influence of Weathering on the Stability of Flame Retardancy in Polymeric Materials for Outdoor Use T2 - 4th European Weathering Symposium (Poster 26) CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-19918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. Fortbildungskurs SAH - Holzoberflächen in der Fassadengestaltung CY - Weinfelden, Schweiz DA - 2010-10-26 KW - Bewitterung KW - Alterung KW - Holz PY - 2010 SN - 978-3-906703-26-8 SP - 29 EP - 38 CY - Zürich, Schweiz AN - OPUS4-22601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. SAH-Tagung 2010, "Holzoberflächen in der Fassadengestaltung", Schweizerische Arbeitsgemeinschaft für Holzforschung CY - Weinfelden, Switzerland DA - 2010-10-26 PY - 2010 AN - OPUS4-22587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part II: Experimental set-up and examination KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 5 SP - 38 EP - 44 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Arrhenius-Ansatz zur Lebensdauervorhersage aus künstlichen Bewitterungsversuchen T2 - 41. Jahrestagung der GUS 2012 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Stutensee, Germany DA - 2012-03-14 PY - 2012 AN - OPUS4-25627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - CarbonLifeCycle - Weathering Induced Degradation of Nanoparticle-Functionalised Polymers T2 - 5th European Weathering Symposium (EWS) CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Development of al leaching test to estimate emissions from synthetic sports grounds into soil and ground water under weathering exposure T2 - [Conference] "Service Life Prediction of Polymeric Materials: Vision for the Future" CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-27915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Zäh, M. A1 - Schönlein, A. A1 - Müller, A. A1 - Vatahska, T. A1 - Manier, G. A1 - Reichert, T. ED - White, C. C. ED - Martin, J. ED - Chapin, J.T. T1 - Polypropylene numerical photoageing simulation by dose-response functions with respect to irradiation and temperature: vipquali project N2 - The aim of the joint project ViPQuali (Virtual Product Qualification) was to describe a component’s ageing behaviour in a given environment, by numerical simulation. Having chosen polypropylene (PP) as the material, which does not show sensitivity to moisture, the relevant weathering parameters of the dose–response functions could be limited to spectral irradiance and temperature. In artificial irradiation tests, for PP plates of varied stabiliser content, spectral sensitivity as well as temperature dependence of irradiation-caused crack formation was quantified. For that purpose, samples were exposed both to artificial weathering tests at various constant temperatures and to spectrally resolved irradiation. The temperature dependence could be modelled by an Arrhenius fit. For fitting the spectral sensitivity, a plateau function was chosen. Subsequently, the stabiliser content was parameterised and extrapolated. The formed dose–response functions were incorporated into a Computational Fluid Dynamics (CFD) software program, simulating the environment of a sample within a Phoenix-exposed IP/DP (Instrument Panel/Door Panel box) box, based on sun position and weather conditions, including radiation interactions. Observed local effects as well as the general ageing advance of PP hats are compared with respect to simulation and experiment. Resulting from this project, for this most simple example of PP of varied stabiliser content, the time to failure can be estimated for each weathering exposure environment with known time-resolved irradiance and temperature conditions. PY - 2015 SN - 978-3-319-06033-0 SN - 978-3-319-06034-7 DO - https://doi.org/10.1007/978-3-319-06034-7_14 SP - Chapter 14, 215 EP - 229 PB - Springer AN - OPUS4-32062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, P. A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Reichert, T. T1 - Surface temperatures of irradiated test specimens - decisive physical quantities and a largely unsolved problem N2 - Temperature is an important parameter in weathering tests. In many (photo-)chemical degradation processes a Variation of the specimen temperature by A t = + 1 °C can cause a Variation of AP(property change) by ± 8%. Since the early eighties it is well known that some types of black panel thermometers can show temperatures that are far below the maximum surface temperature of a black specimen. Although, there were precise requirements for the black coating of the BPT, a replacement by a white coating - depending on the design of the BPT - did not really change the temperature shown by the thermometer. There was no correlation between the BPT and the specimen surface temperature. In Europe and later at ISO the so-called black- and white-standard thermometers BST/WST were introduced. Now, there are BST and WST (ISO) and there are thermally uninsulated and insulated BPT and WPT (ASTM), partly for artificial or for outdoor exposure. And there are other adventurous procedures to determine surface temperatures. The different types of thermometers and different procedures will be discussed and it will be shown that there is no procedure which establishes a correlation between outdoor surface temperatures and surface temperatures in artificial exposure tests. T2 - 6th European weathering symposium Natural and artificial ageing of polymers CY - Bratislava, Slovak Republic DA - 11.09.2013 PY - 2013 SN - 978-3-9813136-8-0 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 16 SP - 185 EP - 194 AN - OPUS4-31292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, P. A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Reichert, T. T1 - On the yet unsolved problem of the determination of precise surface temperatures of specimens exposed to natural and artificial weathering N2 - The surface temperature of test specimens exposed to natural and artificial solar radiation are roughly ascertained with black standard thermometers BST and white standard thermometers WST. For the calibration of these thermometers a new European Standard prEN 16465 was published in 2015, describing the well-known contact method and a new contactless method with a pyrometer. It can be confirmed that the temperature calibrations according to the two methods provide different calibration results which are not interchangeable (which is already stated in the scope of this standard). The described contactless method to determine the surface temperature 'under radiation load' results in clearly too high temperatures. This paper tries to highlighting the reasons. T2 - 7th European weathering symposium - Natural and artificial ageing of polymers CY - Naples, Italy DA - 16.09.2015 PY - 2015 SN - 978-3-9816286-6-1 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 17 SP - 23 EP - 36 AN - OPUS4-34351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chancen und Grenzen der Verkürzung von Bewitterungstests durch empfindliche Chemilumineszenz-Detektion N2 - Eine Verkürzung der Dauer von Bewitterungsversuchen kann durch eine empfindlichere Detektion der Bewitterungseffekte erreicht werden als sie konventionell benützt wird. Eine solche besonders empfindliche Detektionsmethode stellt die Chemilumineszenz dar. Die Verkürzung durch empfindliche Detektion muss jedoch gleichzeitig der Bedingung genügen, ausreichend gute Rangkorrelation zu Bewitterungseffekten unter Anwendungsbedingungen zu zeigen. In diesem Spannungsfeld sollen die Möglichkeiten der Chemiluminiszenz-Detektion beleuchtet werden. T2 - DFO Qualitätstage 2008 CY - Fürth, Deutschland DA - 2008-10-07 KW - Chemilumineszenz KW - Bewitterung KW - Verkürzung KW - empfindlicher Nachweis PY - 2008 SN - 978-3-89943-072-1 SP - 105 EP - 120 PB - DFO CY - Fürth AN - OPUS4-18328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Bewitterung KW - Alterung KW - Eigenschaftsänderung KW - Korrelation PY - 2010 SN - 978-3-9813136-0-4 SP - 45 EP - 55 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Untersuchung der Veränderung der Kratzfestigkeit und Reflow-Fähigkeit von Karosserie-Klarlacken als Folge der Auslagerung in Jacksonville und nachgestellter Laborbewitterung T2 - DFO Qualitätstage 2005 - Moderne Verfahren zur Oberflächencharakterisierung CY - Berlin, Deutschland DA - 2005-10-25 KW - Bewitterung KW - Kratzfestigkeit KW - Kratzbeständigkeit KW - Reflow KW - Weißlichtinterferenz KW - Rauhigkeit PY - 2005 SN - 3-89943-062-X SP - 88 EP - 102 PB - DFO CY - Düsseldorf AN - OPUS4-11216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Determination of the spectral sensitivity and temperature dependence of polypropylene crack formation caused by UV-irradiation N2 - For polypropylene of varied stabilization, spectral sensitivity as well as temperature dependence of irradiation caused crack formation was determined in artificial irradiation tests. UV radiant exposure HUV necessary to generate crack formation was measured both in spectrally dispersed irradiation and artificial irradiation in a Fluorescent UV lamp device. Dependencies were fitted to a plateau function and an Arrhenius function, respectively, to describe the action of irradiation by response functions. Applied to weather data from Phoenix, the results were compared with respective outdoor exposure results. KW - Weathering KW - UV KW - Temperature KW - Numerical simulation PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.06.014 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 10 SP - 2118 EP - 2123 PB - Applied Science Publ. CY - London AN - OPUS4-21913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spezifische Witterungsempfindlichkeiten verschiedener Kunststoffe im Außenbereich T2 - SKZ Fachtagung "Bewitterung von Kunststoffen und Lacken" CY - Würzburg, Germany DA - 2009-03-04 PY - 2009 AN - OPUS4-19591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part I: Fundamentals KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 4 SP - 66 EP - 71 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21493 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüthi, A. A1 - Fäh, D. A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Reichert, T. ED - Halafka, S. T1 - Recent Proposals for Weathering Reference Materials as Discussed by DIN and VDA T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Reference material KW - ORWET KW - Crack KW - Climatic KW - ADF test KW - Spectral sensitivity KW - Referenzmaterial KW - Riss KW - Klimatische Beständigkeit PY - 2003 SN - 3-9808382-3-4 SP - 1(?) EP - 12(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, P. T1 - Application of a newly proposed sensor for effective UV-irradiance for the monitoring of both natural and artificial weathering conditions N2 - To improve on the classic radiometric sensor with radiometric measurement [ ] here a new UV-sensor characteristic for effective UV is proposed that no longer applies equal weighting of spectral irradiation into the UV irradiance value but rather aims at approaching a weighting according to a typical spectral sensitivity curve of polymers. This curve resembles the erythema curve of the skin which is the basis of the UV-index. For the use of the sensor it would be desirable to keep it in the artificial weathering device for the complete weathering test (including rain phases) while the same sensor should also be applicable for the monitoring of outdoor weathering exposures. A first application of this kind of weighted measurement and a comparison with radiometric measurements accompanied with polymer ageing results will be presented together with conclusions for a future effective UV irradiance sensor. T2 - 9th European Weathering Symposium CY - Basel, Switzerland DA - 18.09.2019 KW - UV-irradiance PY - 2019 SN - 978-3-9818507-5-8 VL - 19 SP - 293 EP - 306 AN - OPUS4-49154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Barthel, Anne-Kathrin A1 - Geburtig, Anja A1 - Trubiroha, P. ED - Reichert, T. T1 - Low-Temperature Irradiation Experiments for PE, PA, and PC Matrices N2 - In this paper, we demonstrate the effects of radiation exposures of polymeric materials with UV-A 340 nm lamps (ISO 4892-3, Type 1A) at -10 °C in comparison to an irradiation at +50 °C using a Global UV Test 200 fluorescent lamp device from Weiss Umwelttechnik GmbH, which incorporates an active cooling appliance. While the effects at -10 °C actually are lower than at + 50°C their extent was clearly beyond expectations. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Artificial weathering KW - Irradiation KW - Low-temperature KW - Photo-oxidation KW - Polyamide KW - Polycarbonate KW - Polyethylene PY - 2017 SN - 978-3-9818507-1-0 VL - 18 SP - Paper 22, 319 EP - 329 PB - Thomas Würtz Grafik Design CY - Karlsruhe AN - OPUS4-42130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Two New Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Service Life Symposium CY - Sedona, AZ, USA DA - 2004-02-01 KW - Weathering KW - Reference material KW - WRM KW - UV KW - Radiance KW - Crack KW - JIS K7200 KW - Humidity KW - Bewitterung KW - Referenzmaterial KW - Riss KW - Bestrahlung KW - Luftfeuchte PY - 2005 SN - 0-934010-60-9 SP - 253 EP - 258 PB - Federation of Societies for Coatings Technology CY - Philadelphia AN - OPUS4-13712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter A1 - Takane, Y. T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium - Natural and Artificial Ageing of Polymers CY - Gothenburg, Sweden DA - 2005-06-16 KW - Weathering Reference Materials PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 145 EP - 154 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-10376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, P. A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Messung der Temperatur von bestrahlten Oberflächen-Blechdicke beim BST N2 - Die Grenzen der Oberflächentemperaturen von Proben, die der natürlichen oder einer künstlichen Globalstrahlung ausgesetzt sind, können grob mit sog. Schwarzstandard Thermometern BST oder Weißstandard Thermometern WST ermittelt werden [ 1a) ]. Um einige Mängel der aktuellen Konstruktion zu beseitigen, wird ein neues Konzept dieser Thermometer vorgeschlagen, das sie weniger träge und ihre physikalischen Eigenschaften ähnlicher denen einer 5 mm dicken Polymerplatte macht. Es wird auch gezeigt, dass eine Anforderung an die Reaktionszeit von weniger als 1 min in EN 513 unrealistisch ist. T2 - 45. Jahrestagung der GUS CY - Stutensee DA - 16.03.2016 KW - Oberflächentemperatur KW - Strahlungserwärmung KW - IR-Thermometer PY - 2016 SN - 978-3-9816286-7-8 SP - 125 EP - 134 AN - OPUS4-36916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. T1 - Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums N2 - Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt. Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt. T2 - 46. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 22.03.2017 KW - Bewitterung KW - Spektrale Bestrahlung KW - Kunststoffe PY - 2017 SN - 978-3-9816286-9-2 SP - 91 EP - 99 AN - OPUS4-39595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Berger, Wolfgang A1 - Wachtendorf, Volker A1 - Hally, S. ED - Arm, M. ED - Vandecasteele, C. ED - Heynen, J. ED - Suer, P. ED - Lind, B. T1 - Development of leaching procedures for synthetic turf systems N2 - Scrap tyres are widely reused in the form of granules as infill materials or component of sub-base layers in construction of sporting grounds such as synthetic turf areas and athletic track surfaces. The recycled rubber may contain organic and inorganic pollutants due to the presence of vulcanisation catalysts, stabilisers and other additives which can be released into soil and groundwater in the case of outdoor sports facilities. In order to evaluate the amount of potentially mobile pollutants, leaching tests can be employed. This study aimed particularly at the investigation of the feasibility of column tests using complete synthetic surface flooring or turf system assemblies. The release of zinc and polycyclic aromatic hydrocarbons (PAH) leached from components of sports surfaces containing recycled rubber granules was considered. Additionally, batch tests on coated and uncoated styrene butadiene rubber (SBR) granules aged by artificial weathering were performed to indicate its possible influence on the leaching behaviour of zinc and PAH. The chosen approach of column tests simulating typical complete synthetic sports surface installations has been proven to be feasible and robust. The time-dependent leaching behaviour and interactions between single components can be evaluated by column tests. Zinc was the most relevant contaminant in the eluates and its leachability was enhanced after accelerated ageing by artificial weathering. Leachable PAH were found in relatively low but well detectable amounts which increase by ageing as well. T2 - WASCON 2012 CY - Gothenburg, Sweden DA - 30.05.2012 KW - Waste rubber KW - Artificial turf KW - Leaching behaviour KW - Batch test KW - Column test PY - 2012 SP - 1 EP - 5 PB - ISCOWA and SGI AN - OPUS4-26968 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid (HNO3) on HDPE jerrycans – comparison of outdoor and lab test N2 - A damaging action of HNO3-55% only occurs in combination with its decomposition into nitrous gases, which can be caused by UV radiation. In a laboratory test, transparent HDPE jerrycans have been exposed to both UV radiation and 55 wt-% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The respective damages are compared with FTIR spectroscopy in ATR and HT-gel permeation chromatography (GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. The gradual increase in oxidative damage shows the good reproducibility of the lab exposure. The decomposition of nitric acid into nitrous gases by UV radiation – as well as the jerrycan oxidation – is also observed at lower HNO3 concentration (28 wt- %). Similar results are obtained after outdoor tests. Again, the damage occurs only after combined exposure, in contrast to the exposures to UV only and to HNO3 only, which were conducted in parallel. Outdoor exposures are most readily accepted as they represent possible end-use conditions. However, the reproducibility of these exposures is poor due to the large temporal variations in weather. There are also several safety risks, which is why the number of replicates remains limited. Since the outdoor and lab exposure tests show the same qualitative results, it is appropriate to conduct systematic studies in the laboratory. After 6 days of lab exposure, the oxidation damage is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. It should be noted that this amount can also occur in two sunny weeks. T2 - 24th iapri World Packaging Conference CY - Valencia, Spain DA - 17.06.2024 KW - Ppolyethylene KW - UV exposure KW - Nitric acid KW - Oxidation PY - 2024 VL - 2 SP - 30 EP - 37 PB - ITENE AN - OPUS4-60414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scholz, Philipp A1 - Wachtendorf, Volker A1 - Panne, Ulrich A1 - Weidner, Steffen ED - Scholz, Philipp T1 - Degradation of MDI-based polyether and polyester-polyurethanes in various environments - Effects on molecular mass and crosslinking N2 - Size-exclusion chromatography (SEC) was used to monitor changes of the molecular masses of thermoplastic polyether – and polyester urethane (TPU) exposed to thermal, hydrolytic, and photo-oxidative (UV) Degradation conditions for several days. The thermal treatment was performed at elevated temperatures (100–200 °C) under oxidative (air) as well as non-oxidative (nitrogen) conditions to evaluate the specific influence of oxygen on the degradation. At higher temperatures (≥175 °C) a fast decrease of the molecular masses of both PU accompanied by a high degree of crosslinking was found. At lower temperatures (≤150 °C) the polymers remained widely unaffected by thermal degradation within the investigated degradation interval of up to two weeks. Surprisingly, the influence of oxygen (air) was found to be less distinct. In contrast to that, UV treatment at 25 °C at less than 10% rel. humidity (RH) resulted in a fast crosslinking, whereas the molecular masses of both PU decreased slower than for thermal treatments. The depth of penetration of the UV radiation was estimated using 3D printed PU samples with different thicknesses. Hydrolysis based degradation effects were less significant. Only slight molecular mass changes were detected at temperatures ≤80 °C within a time span of 14 days, while no crosslinking could be measured. Considering the degradation results at the investigated exposure parameters, it could be shown that esterbased PU in general exhibits a significant higher stability compared to ether-based materials. KW - Polyurethane KW - Thermal degradation KW - UV degradation KW - Molecular masses KW - Crosslinking PY - 2019 UR - https://www.sciencedirect.com/science/article/pii/S0142941819302363 DO - https://doi.org/10.1016/j.polymertesting.2019.04.028 SN - 0142-9418 VL - 77 SP - 105881, 1 EP - 12 PB - Elsevier CY - Amsterdam AN - OPUS4-48619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scholz, Philipp A1 - Falkenhagen, Jana A1 - Wachtendorf, Volker A1 - Brüll, Robert A1 - Simon, Franz-Georg T1 - Investigation on the Durability of a Polypropylene Geotextile under Artificial Aging Scenarios N2 - Geosynthetics are widely used in various civil engineering applications, such as geotextiles in coastal protection, and display a sustainable alternative to natural mineral materials. However, the full benefits of using geosynthetics can only be gained with a long service lifetime of the products. With the use of added stabilizers to the polymers, service lifetimes can be achieved in the range of 100 years. Therefore, accelerated aging methods are needed for the assessment of the long-term performance of geotextiles. In the present study, the behavior of geosynthetic materials made of polypropylene was investigated under artificial aging conditions involving elevated temperatures ranging from 30 to 80 °C, increased oxygen pressures ranging from 10 to 50 bar in water-filled autoclaves, and UV irradiation under atmospheric conditions. ATR-IR spectroscopy was employed to detect the increase in the carbonyl index over various aging durations, indicating the oxidative degradation of the geotextile. The most pronounced increase was observed in the case of aging through UV irradiation, followed by thermal aging. Elevated pressure, on the other hand, had a lower impact on oxidation. High-temperature size exclusion chromatography was utilized to follow the reduction in molar mass under different degradation conditions, and the results were consistent with those obtained from ATR-IR spectroscopy. In polyolefins such as polypropylene, Hindered Amine Stabilizers (HAS) are used to suppress oxidation caused by UV radiation. The quantitative analysis of HAS was carried out using a UV/Vis method and HPLC. The degradation of UV stabilizers during the aging of geotextiles is responsible for the oxidation and the reduction in the molar mass of polypropylene. From the results, it can be concluded that applications of PP geotextile without soil or sand cover might cause the risk of the formation of microplastic particles. Material selection, design, and maintenance of the construction must follow best practices, including the system’s removal or replacement at end-of-life. Otherwise, a sustainable use of geotextiles in civil engineering is not possible. KW - Geotextiles KW - Microplastic KW - Size exclusion chromatography KW - Accelerated aging PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599739 DO - https://doi.org/10.3390/su16093559 SN - 2071-1050 VL - 16 IS - 9 SP - 1 EP - 15 PB - MDPI AG CY - Basel AN - OPUS4-59973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -