TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ivers, Heinz A1 - Rudolph, Hans-Volker A1 - Trappe, Volker A1 - Niebergall, Ute T1 - Mikroriss-Charakterisierung mittels Röntgen-Refraktions-Topographie N2 - Einleitung Bei der Detektion von Mikrorissen und der Charakterisierung spezifischer Schädigungen von Polymer- und Kompositwerkstoffen kommt es neben quantitativen Bewertungen auch auf die Analyse von orientierungsabhängigen Struktureffekten an. Am Beispiel typischer Vertreter ausgewählter Materialien (PP/PE, CFK) wird dargestellt, inwieweit das Potential der Röntgen-Refraktions-Topographie vorteilhaft zur umfassenden Materialcharakterisierung genutzt werden kann. Die korrosiven Eigenschaften nichtmetallischer Werkstoffe werden maßgeblich vom mikrostrukturellen Aufbau der verwendeten Materialien bestimmt. Typische Versagens-mechanismen von Faser-Kompositen sind neben der Faserenthaftung vor allem durch Mikrorisse gekennzeichnet, die sich teils parallel, teils senkrecht zu den Fasern in der Matrix ausbreiten. Eine wichtige Anwendung der Röntgen-Refraktions-Topographie umfaßt die orientierungsselektive Detektion von Mikroriß-Oberflächen. Die Nachweisgrenze derartiger Schädigungen erstreckt sich bis zum Nanometerbereich. Definiert herbeigeführte Ermüdungsschäden an Kompositmaterialien lassen sich mit dieser Methode ausgezeichnet erfassen und gestatten eine quantitative Korrelation zu mechanischen Kenngrößen. Mittels schrittweiser Probenabtastung und der ortskorrelierten Speicherung von simultan erfassten Refraktions- bzw. Absorptionszählraten wird ein zweidimensionales Röntgen-Refraktions-Topogramm rekonstruiert, das u.a. die präzise Information der integralen Rissdichte enthält. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p18/p18.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Alexander A1 - Trappe, Volker A1 - Hickmann, Stefan A1 - Ortwein, H.-P ED - Christ, Hans-Jürgen T1 - Investigation of the infinite life of fibre-reinforced plastics using X-ray refraction topography for the in-situ, nondestructive evaluation of micro-structural degradation processes during cyclic fatigue loading N2 - The described investigation of carbon-fibre-reinforced plastics (CFRP) documents that damage evolution can be observed by means of X-ray refractography. Comparative investigations with synchrotron technique on CFRP and grey-scale analysis on glass fibre-reinforced-plastics (GFRP) confirm these results. Moreover it was found that the fracture mechanical properties of the matrix system influence damage nucleation and propagation in the laminate during static and fatigue loads. Single-step fatigue tests were carried out on Laminates with RIM135 and LY556 matrix systems made from non-crimped fabric (NCF) or twill weave in different fibre orientations. The damage to the LY556 laminates was characterized by laminate cracks growing rapidly over the whole specimen width, whereas the damage on the RIM135 laminates was characterized by an earlier onset of micro-cracking followed by laminate cracks. The specimens were fatigued up to 108 (very high cycle fatigue (VHCF) regime) load cycles. S-N-curves of damage initiation were drawn and boundaries were identified for endurance within the VHCF regime. A phenomenology based model focusing on matrix stress was applied to reproduce the first inter-fibre failure (IFF) under static and fatigue loads. KW - Carbon fibre-reinforced-plastics KW - Fatigue KW - Damage evolution KW - X-ray refractography KW - Very high cycle fatigue PY - 2018 SN - 978-3-658-24531-3 DO - https://doi.org/10.1007/978-3-658-24531-3 VL - 2018 SP - 417 EP - 439 PB - Springer Spektrum CY - Wiesbaden ET - 1. Auflage AN - OPUS4-50096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Günzel, Stephan A1 - Trappe, Volker ED - Frenz, Holger ED - Grellmann, Wolfgang T1 - Ermittlung bruchmechanischer Kennwerte an Epoxid-Harzen T2 - Tagung Werkstoffprüfung 2008 "Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung" CY - Berlin, Deutschland DA - 2008-12-04 KW - Rissfortschritt KW - Risszähigkeit KW - Epoxid-Harz KW - Crack growth KW - Fracture toughness KW - Epoxy resin PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht VL - 642 IS - 642 SP - 295 EP - 300 PB - DVM CY - Berlin AN - OPUS4-18778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Harbich, Karl-Wolfram A1 - Ernst, Hardy ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Micro cracking and stress state under fatigue loading of CFRP T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 697 EP - 704 PB - Springer CY - Berlin AN - OPUS4-2770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Hentschel, Manfred P. A1 - Ivers, Heinz ED - Gdoutos, E. T1 - Determination of inter-fibre-failure in complex, reinforced composites T2 - 16th European Conference of Fracture "Fracture of Nano and Engineering Materials and Structures" CY - Alexandroupolis, Greece DA - 2006-07-03 PY - 2006 SN - 1-402-04971-4 IS - 900_tra SP - 1 EP - 8(?) PB - Springer CY - Dordrecht AN - OPUS4-14183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Trappe, Volker A1 - Goebbels, Jürgen A1 - Hickmann, Stefan A1 - Grasse, Fabian T1 - Non-destructive characterization of composites: from small scale to complex component testing - a challenge T2 - International Symposium on NDT in Aerospace CY - Hamburg, Germany DA - 2010-11-22 KW - Aircraft KW - Wind turbine blades KW - Automotive KW - X-ray refraction KW - Fibre orientation KW - WAXS technique KW - X-ray computed tomography PY - 2010 SN - 978-3-940283-28-3 IS - DGZfP-BB 124 (Tu.2.B.1) SP - 1 EP - 6 AN - OPUS4-22724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Trappe, Volker A1 - Günzel, Stephan A1 - Jaunich, Matthias ED - Yao, W. ED - Renard, J. ED - Himmel, N.A. T1 - Correlation between crack propagation rate and cure process of epoxy resins KW - Fracture toughness KW - Crack resistance KW - Fracture mechanics KW - Plastics KW - Crack propagation PY - 2012 SN - 978-1-60595-091-4 SP - 277 EP - 290 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-27947 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -