TY - CONF A1 - Kusche, Nadine A1 - Schukar, Vivien A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Habel, Wolfgang A1 - Woschitz, H. A1 - Lienhart, W. ED - Jaroszewicz, L.R. T1 - Field examples for optical fibre sensor condition diagnostics based on distributed fibre-optic strain sensing N2 - Fibre optic sensors for monitoring in safety-relevant structures have to be validated in order to proof their reliability under typical structural load conditions. The reliable use of optical fibre sensors depends strongly on an appropriate and qualitative application. Diagnostics of the physical condition of embedded and surface-applied fibre optic strain sensors are demonstrated on field examples. Distributed strain measurement based on Rayleigh backscattering is used to determine breakage of the fibre, interface adhesion problems and to identify application related strain transfer mechanisms. T2 - EWOFS 2013 - 5th European workshop on optical fibre sensors CY - Kraków, Poland DA - 19.05.2013 KW - Fibre Bragg grating KW - Rayleigh backscattering KW - Condition diagnostics KW - Strain KW - Strain transfer PY - 2013 SN - 978-0-81949-634-8 U6 - https://doi.org/10.1117/12.2025567 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8794 IS - Paper 8794 - 181 SP - 879433-1 EP - 879433-4 AN - OPUS4-28570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Mewis, Franziska A1 - Kohlhoff, Harald ED - Yang, M. ED - Wang, D. ED - Rao, Y. T1 - Experimental validation of applied strain sensors - importance, methods and still unsolved challenges N2 - Fiber-optic strain sensors are increasingly used in very different technical fields. Sensors are provided with specifications defined by the manufacturer or ascertained by the interested user. If deformation sensors are to be used to evaluate the long-term behavior of safety-relevant structures or to monitor critical structure components, their performance and signal stability must be of high quality to enable reliable data recording. The measurement system must therefore be validated according to established technical rules and standards before its application and after. In some cases, not all details of the complex characteristic and performance of applied fiber-optic sensors are sufficiently understood, or can be validated because of a lack of knowledge and methods to check the sensors' behavior. This contribution focusses therefore on the importance of serious validation in avoiding a decrease or even deterioration of the sensors' function. Methods for validation of applied sensors are discussed and should reveal weaknesses in validation of embedded or integrated fiber-optic deformation and/or strain sensors. An outlook to some research work that has to be carried out to ensure a well-accepted practical use of fiber-optic sensors is given. T2 - 4th Asia Pacific optional sensors conference CY - Wuhan, China DA - 2013-10-15 KW - Fiber-optic sensor KW - Strain sensor KW - Reliability KW - Durability KW - Sensor characteristics KW - Application-related changes KW - Adhesive stability KW - Validation PY - 2013 U6 - https://doi.org/10.1117/12.2036591 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8924 SP - 892410-1 - 892410-6 AN - OPUS4-29908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Steinke, F. A1 - Basedau, Frank ED - Ilki, A. ED - Motavalli, M. ED - Goksu, C. ED - Havranek, B. T1 - Investigation of the fiber-optic strain sensors' beahvior under offshore conditions to create standards for reliable application T2 - SMAR 2013 - 2nd Conference on smart monitoring, assessment and rehabilitation of civil structures CY - Istanbul, Turkey DA - 2013-09-09 KW - Fibre-optic sensor KW - Strain sensor KW - Reliability KW - Durability KW - Sensor characteristics KW - Offshore application KW - Harsh impacts PY - 2013 SN - 978-3-033-04055-7 SP - 1 EP - 8(?) CY - Istanbul, Turkey AN - OPUS4-29909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Kusche, Nadine ED - Peters, K.J. ED - Ecke, W. ED - Matikas, T.E. T1 - The role of experimental validation in achieving reliable measurement data with applied FBG strain sensors N2 - Fiber-optic strain sensors are increasingly used in very different technical fields. Sensors are provided with specifications defined by the manufacturer or ascertained by the interested user. In some cases, sensor specification is not sufficiently validated and must therefore additionally be validated in a laboratory, primarily to ensure reliable measurement information over the intended period of operation. Even if the performance of delivered sensor is well specified, the sensor's strain characteristics and the performance of an applied sensor can significantly differ from the virgin sensor's performance. In this case, applied sensors do not provide full reliability and lead sometimes to uncertain measurement results. This contribution will therefore focus on the role of validation in avoiding a decrease or even deterioration of the sensor function of applied sensors. Experimental validation - not only modelling - is very important, however, before experimental investigations are planned knowledge about key issues and problems that influence the measurement results must be available. Few aspects to be considered and investigated will be discussed. Selected experimental facilities to reveal weaknesses in the sensor function will be described; an outlook to open questions is given. T2 - Smart sensor phenomena, technology, networks, and systems integration 2013 CY - San Diego, CA, USA DA - 2013-03-10 KW - Fibre-optic sensor KW - Strain sensor KW - Reliability KW - Durability KW - Sensor characteristics KW - Application-related changes KW - Adhesive stability KW - Validation PY - 2013 U6 - https://doi.org/10.1117/12.2009677 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8693 IS - Paper 12 SP - 86930C-1 - 86930C-11 AN - OPUS4-29911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Schukar, Vivien A1 - Tkachenko, Viktoriya A1 - Hofmann, Detlef A1 - Basedau, Frank ED - Xu, Y. L. ED - Zhu, S. ED - Xia, Y. ED - Ni, Y.Q. ED - Law, S.S. ED - Yin, J. H. ED - Su, Z.Q. T1 - Values gained from composite-embedded sensor fibres - trustworthy results or vague estimations; possibilities and limitations of getting reliable measurement results T2 - SHMII-6 - 6th International conference on structural health monitoring of intelligent infrastructure CY - Hong Kong, China DA - 2013-12-09 KW - Composite materials KW - Embedded sensors KW - Monitoring KW - Early damage detection KW - Validation KW - Reliability KW - Maintenance KW - Repair PY - 2013 SN - 978-962-367-768-4 SP - 1 EP - 11(?) AN - OPUS4-29912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -