TY - CONF A1 - Müller, Karsten A1 - Ballheimer, Viktor A1 - Droste, Bernhard A1 - Rödel, Roland A1 - Völzke, Holger A1 - Zencker, Uwe T1 - Die Anwendung der Bruchmechanik im Sicherheitsnachweis von Transportbehältern für die Beförderung radioaktiver Stoffe T2 - 36. Tagung des DVM-Arbeitskreises Bruchvorgänge CY - Köln, Deutschland DA - 2004-02-17 KW - Gusseisen mit Kugelgraphit KW - Bruchmechanischer Sicherheitsnachweis KW - Stoßbeanspruchung KW - Transportbehälter KW - Radioaktive Stoffe KW - Ductile iron KW - Fracture mechanics safety assessment KW - Mechanical impact KW - Transport casks KW - Radioactive material PY - 2004 SN - 0943-3473 IS - 236 SP - 225 EP - 238 PB - DVM CY - Berlin AN - OPUS4-5336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor A1 - Droste, Bernhard A1 - Wieser, Günter A1 - Qiao, Linan T1 - Spent fuel transport associated with other dangerous goods in regular train units - assessment of hypothetical explosion impacts T2 - 14th International Symposium on the Packaging and Transportation of Radioactive Materials, September 20-24, 2004, Berlin CY - Berlin, Germany DA - 2004-09-20 KW - Transport spent fuel cask KW - Accident KW - Blast wave KW - Finite element analysis PY - 2004 IS - 235 SP - 1 EP - 7(?) PB - BAM CY - Berlin AN - OPUS4-11906 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ballheimer, Viktor A1 - Droste, Bernhard A1 - Wieser, Günter A1 - Qiao, Linan T1 - Spent fuel transport associated with other dangerous goods in regular train units - assessment of hypothetical explosion impacts KW - Transport spent fuel cask KW - Accident KW - Blast wave KW - Finite element analysis PY - 2004 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 3-4 SP - 239 EP - 245 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-11975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Frank A1 - Ballheimer, Viktor A1 - Zeisler, Peter A1 - Krietsch, Torsten T1 - New BAM-Guideline for the Calculation and Assessment of Lid and Trunnion Systems for RAM Packages with Respect to IAEA-96 Requirements T2 - 7th International Conference on Radioactive Materials Transport 2005 CY - Cambridge, England, UK DA - 2005-09-27 PY - 2005 SP - 11 pages PB - The Institution of Nuclear Engineers (INucE) CY - Cambridge AN - OPUS4-11231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Frank A1 - Ballheimer, Viktor A1 - Zeisler, Peter T1 - BAM guideline draft for lid and trunnion systems: contents, structure, compatibility and use N2 - The Federal Institute for Materials Research and Testing (BAM) intends to provide a new guideline for the analysis and assessment of lid and trunnion systems. This guideline is discussed in the present paper with respect to its contents and structure, its compatibility with other guidelines and selective technical issues to demonstrate its use. Particularly, the motivation, the principles and the background of the guideline are addressed. Therefore, the present paper discusses current conclusions drawn from experimental results and the wide use of advanced analysis methods such as finite element analysis as well as the incorporation of these aspects in the guideline draft. KW - Guideline KW - Trunnion KW - Bolts KW - Seals KW - Fatigue PY - 2006 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 17 IS - 3 SP - 153 EP - 157 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-14360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Droste, Bernhard T1 - Suggestions for correct performance of IAEA 1 m puncture bar drop test with reduced scale packages considering similarity theory aspects T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Similarity theory KW - Puncture bar drop test KW - Reduced scale packages KW - Drop height adaption PY - 2007 DO - https://doi.org/10.1179/174651007X191233 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 18 IS - 2 SP - 111 EP - 116 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-15891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor T1 - Similarity aspects for closure systems in small scale package drop testing T2 - PATRAM 2007 The 15th International Symposium on the Packaging and Transportation of Radioactive Material CY - Miami, FL, USA DA - 2007-10-21 PY - 2007 AN - OPUS4-16016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Droste, Bernhard T1 - Suggestions for correct performance of IAEA 1 m puncture bar drop test with reduced-scale packages considering similarity theory aspects T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Similarity KW - Puncture Bar Drop Test KW - Scale Models KW - IAEA Regulations PY - 2007 IS - CD-ROM SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-16104 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - From experiment to an appropriate finite element model-safety assessment for ductile cast iron casks demonstrated by means of IAEA puncture drop test N2 - In the approval procedure of transport packages for radioactive materials, the competent authority mechanical and thermal safety assessment is carried out in Germany by BAM Federal Institute for Materials Research and Testing. The combination of experimental investigations and numerical calculations in conjunction with materials and components testing is the basis of the safety assessment concept of the BAM. Among other mechanical test scenarios a 1 meter drop test onto a steel bar has to be considered for hypothetical accident conditions of Type B packages according to IAEA regulations. Within the approval procedure for the new German package design of the HLW cask CASTOR® HAW 28M, designed by GNS Gesellschaft für Nuklear-Service Germany, a puncture drop test was performed with a half-scale model of the cask at -40°C. For independent assessment and to control the safety analysis presented by applicant, BAM developed a complex finite element model for a dynamical ABAQUS/ExplicitTM analysis. This paper describes in detail the use of the finite element (FE) method for modeling the puncture drop test within an actual assessment strategy. At first investigations of the behaviour of the steel bar are carried out. Different friction coefficients and the material law of the bar are analysed by using a 'rigid-body' approximation for the cask body. In the next step a more detailed FE model with a more realistic material definition for the cask body is developed. Strain verification is possible by results of the strain gauges located at the relevant points of the cask model. The influence of the finite element meshing is described. Finally, the verified FE half-scale model is expanded to full-scale dimension. Scaling effects are analysed. The model is used for safety assessment of the package to be approved. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - IAEA KW - Puncture drop test KW - Numerical analysis KW - Verification PY - 2010 SP - 1-8 (Tuesday/T19/26-115) AN - OPUS4-23928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kuschke, Christian A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Komann, Steffen T1 - Mechanical assessment criteria of spent fuel assemblies basket design N2 - Packages for the transport of radioactive material are generally equipped with specific structures (basket) to support the radioactive content in defined position. The safety function of the basket depends on the kind of transported inventory. In case of transport cask for spent fuel, the basket design has to ensure the subcriticality of the fissile material in all conditions of transport in particular. Therefore the evaluation of structural integrity and neutron absorption capability of the basket is an important part of complete safety analysis. Sufficient heat transfer to maintain fuel assembly and cask temperature within allowable limits has to be verified as well. Corrosion resistance is an additional requirement on basket materials owing to contact with water during loading and unloading operations. Computational and experimental methods or their combination along with additional material and component tests can be used to analyse the mechanical and thermal basket behaviour under transport conditions defined in IAEA regulations. By deciding between the analysis methods, the design features (including material selection concept) as well as specific safety function should be accounted. In approval procedures of transport packages for radioactive materials, the competent authority mechanical and thermal safety assessment is carried out in Germany by BAM. Some questions of safety evaluation of basket designs are discussed in this paper based on the BAM experience within approval procedures. The paper focuses primarily on the mechanical behaviour of baskets with regard to the assumptions that have to be used in the criticality safety demonstration. The state of the art methodologies for computational basket stress and deformation analysis as well as for interpretation of drop tests results are presented. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Transport conditions KW - Spent fuel assemblies KW - Basket design PY - 2010 SP - 1 EP - 7 (Thursday T36/92) AN - OPUS4-24345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weber, Mike A1 - Wille, Frank A1 - Ballheimer, Viktor A1 - Musolff, André T1 - From experiment to appropriate finite element model-safety assessment for ductile cast iron casks demonstrated by means of IAEA puncture drop test N2 - In the approval procedure of transport packages for radioactive materials, the competent authority mechanical and thermal safety assessment is carried out in Germany by BAM Federal Institute for Materials Research and Testing. The combination of experimental investigations and numerical calculations in conjunction with materials and components testing is the basis of the safety assessment concept of the BAM. Among other mechanical test scenarios, a 1 metre drop test onto a steel bar has to be considered for the application of the hypothetical accident conditions to Type B packages according to IAEA regulations. Within the approval procedure for the new German package design of the HLW cask CASTOR® HAW 28M, designed by GNS Gesellschaft für Nuklear-Service Germany, a puncture drop test was performed with a half-scale model of the cask at -40°C. For independent assessment and to control the safety analysis presented by the applicant, BAM developed a complex finite element (FE) model for a dynamical ABAQUS/ExplicitTM analysis. This paper describes in detail the use of the FE method for modelling the puncture drop test within an actual assessment strategy. At first, investigations of the behaviour of the steel bar were carried out. Different friction coefficients and the material law of the bar were analysed by using a 'rigid-body' approximation for the cask body. In the next step, a more detailed FE model with a more realistic material definition for the cask body was developed. The validation of calculated strains was carried out by comparison with the results of the strain gauges located at the relevant points of the cask model. The influence of the FE meshing is described. Finally, the validated FE half-scale model was expanded to full-scale dimension. Scaling effects were analysed. The model was used for safety assessment of the package to be approved. KW - IAEA puncture drop test KW - Cylindrical cask KW - Explicit dynamics KW - Scaled model KW - Numerical analysis KW - Validation KW - Safety assessment PY - 2011 DO - https://doi.org/10.1179/1746510911Y.0000000010 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 22 IS - 3 SP - 148 EP - 153 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-25356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Rolle, Annette A1 - Droste, Bernhard T1 - Mechanical behaviour of high burn-up SNF under normal and accident transport conditions - present approaches and perspectives N2 - Transport packages for spent fuel have to meet the International Atomic Energy Agency requirements for different transport conditions. Physical state of spent fuel and fuel rod cladding as well as geometric configuration of fuel assemblies are important inputs for the evaluation of package capabilities under these conditions. In this paper, the mechanical behaviour of high burn-up spent fuel assemblies under transport conditions is analysed with regard to assumptions to be used in the activity release and criticality safety analysis. In particular the different failure modes of the fuel rods (fine cracks or complete breakage), which can cause release of gas, volatiles, fuel particles or fragments have to be properly considered in these assumptions. In view of the complexity of interactions between the fuel rods as well as between fuel assemblies, basket, and cask containment, the exact mechanical analysis of such phenomena is nearly impossible. The gaps in information concerning the material properties of cladding and pellets, especially for the high burn-up fuel, make the analysis more complicated additionally. In this context some practical approaches based on experiences of BAM Federal Institute for Material Research and Testing within safety assessment of packages for transport of spent fuel are discussed. T2 - ASME 2012 Pressure vessels & piping division conference CY - Toronto, Ontario, Canada DA - 15.07.2012 KW - Fuel rods KW - High burn-up KW - Mechanical behaviour KW - Transport conditions PY - 2012 SP - PVP2012-78302, 1-7 PB - American Society of Mechanical Engineers CY - New York AN - OPUS4-26320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballheimer, Viktor T1 - Mechanical Behaviour of High burn-Up SNF under Normal and Accident Transport conditions - Present Approaches an Perspectives - T2 - ASME Pressure Vessels & Piping Division Conference 2012 CY - Toronto, Canada DA - 2012-07-15 PY - 2012 AN - OPUS4-26326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Apel, Andreas A1 - Ballheimer, Viktor A1 - Kuschke, Christian A1 - Schubert, Sven A1 - Wille, Frank T1 - Approach for the use of acceleration values for packages of radioactive material under routine conditions of transport N2 - The most relevant source of reference for load cases of packages for the transport of radioactive material under routine conditions is Appendix IV of the International Atomic Energy Agency (IAEA) Advisory Material TS-G-1·1. The acceleration values given there leave many questions open and have to be agreed upon with the involved competent authorities. Consequently, the actual load cases applied for a safety analysis may differ widely and could cause problems for international transport. To avoid such difficulties, it seems obvious that the according passages in TS-G-1·1 should be modified with the objective of making the load case data more consistent for a harmonized application in the IAEA member states. Papers pointing out in this direction were discussed at the PATRAM 2010 conference. The way to improve the acceleration data may lie in investigations and measurements considering, for example different types of vehicles and package masses. However, what should be the goal of such kind of surveys? Can such investigation provide values for every worldwide load case possible under routine conditions of transport? In particular, the different designs of vehicles give a reason to doubt that such an aim is realistic. The approach in this paper is to show that a less ambitious aim is more effective. Therefore, an approximate scheme is preferred, which renders better assistance in determining the appropriate acceleration values. T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage CY - London, UK DA - 22.05.2012 KW - Radioactive materials KW - Safety assessment KW - IAEA regulations KW - Lost cases KW - Routine conditions of transport PY - 2012 SP - 1 EP - 8 AN - OPUS4-26747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Quercetti, Thomas A1 - Ballheimer, Viktor A1 - Wieser, Günter T1 - Analytical, numerical and experimental investigations on the impact behaviour of packagings for the transport of radioactive material under slap down conditions T2 - PATRAM 2001, 13th International Symposium on Packaging and Transportation of Radioactive Materials CY - Chicago, IL, United States of America DA - 2001-09-03 PY - 2001 SN - 0893-6188 VL - 30 IS - 3 SP - 18 EP - 25 PB - Institute of Nuclear Materials Management CY - Northbrook, Ill. AN - OPUS4-1940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -