TY - JOUR A1 - Kellermeier, Matthias A1 - Scheck, Johanna A1 - Drechsler, Markus A1 - Rosenberg, Rose A1 - Stawski, Tomasz A1 - Fernandez-Martinez, Alejandro A1 - Gebauer, Denis A1 - Van Driessche, Alexander E. S. T1 - From Ions to Crystals: A Comprehensive View of the Non‐Classical Nucleation of Calcium Sulfate N2 - After years of intensive research and numerous important observations, our understanding of the early stages of crystallization is still limited due to the complexity of the underlying processes and their elusive character. In the present work, we provide a detailed view on the nucleation of calcium sulfate mineralization – an abundant mineral with broad use in construction industry – in aqueous systems at ambient conditions. As experimental basis, a co‐titration procedure with potentiometric, turbidimetric and conductometric detection was developed, allowing solution speciation and the formation of crystallization precursors to be monitored quantitatively as the level of nominal (super)saturation gradually increases. The nature and spatiotemporal evolution of these precursors was further elucidated by time‐resolved small‐angle X‐ray scattering (SAXS) and analytical ultracentrifugation (AUC) experiments, complemented by cryogenic transmission electron microscopy (cryo‐TEM) as a direct imaging technique. The results reveal how ions associate into nanometric primary species, which subsequently aggregate and develop anisotropic order by intrinsic structural reorganization. Our observations challenge the common understanding of fundamental notions such as the nucleation barrier or the meaning of supersaturation, with broad implications for mineralization phenomena in general and the formation of calcium sulfate in geochemical settings and industrial applications in particular. KW - Calcium sulfate KW - Gypsum KW - Nucleation KW - Crystallisation PY - 2024 DO - https://doi.org/10.1002/anie.202408429 SP - 1 EP - 12 PB - Wiley AN - OPUS4-61585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stawski, Tomasz A1 - Karafiludis, Stephanos A1 - Pimentel, Carlos A1 - Montes-Hernández, German A1 - Kochovski, Zdravko A1 - Bienert, Ralf A1 - Weimann, Karin A1 - Emmerling, Franziska A1 - Scoppola, Ernesto A1 - Van Driessche, Alexander E.S. T1 - Solution-driven processing of calcium sulfate: The mechanism of the reversible transformation of gypsum to bassanite in brines N2 - Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios. KW - Industrial and Manufacturing Engineering KW - Strategy and Management KW - General Environmental Science KW - Renewable Energy, Sustainability and the Environment KW - Building and Construction KW - Calcium sulfate KW - Gypsum KW - Bassanite KW - Scattering KW - Raman KW - In situ KW - Synchrotron KW - BESSY KW - MySpot PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594698 UR - https://www.sciencedirect.com/science/article/pii/S0959652624004591#appsec1 DO - https://doi.org/10.1016/j.jclepro.2024.141012 SN - 0959-6526 VL - 440 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-59469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -