TY - CONF A1 - Konchina, V. T1 - Application of ISO 5725-5725-6 for the validation of ultrasonic testing T2 - ECNDT 2006 9. Europäische Konferenz für Zerstörungsfreie Prüfung CY - Berlin, Germany DA - 2006-09-25 PY - 2006 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. AN - OPUS4-14321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Konchina, V. A1 - Markucic, D. A1 - Piscenec, Z. T1 - General principles of reliability assessment of NDE systems and its applicability to the mine detection practice N2 - The reliability investigations are dedicated to throw light on the performance of the NDE system with respect to the required aim. This is especially of interest when it is looked for life damaging objects in the case of mine seeking and when it is even more difficult to distinguish between the different suppliers of methods concerning their actual capability. In accordance with the conception of EFNDT WG5 and CEN BT 126 CW 07 the authors have the aim to transfer the knowledge in reliability measurement of NDE systems to the reliability measurement of mine detection systems. For this the three basic ways to investigate the reliability of NDE signals will be described. The first way of investigation, the performance demonstration, is preferred e.g. in the US American nuclear power industry. This is an integral consideration of the non destructive test as a system where the whole NDE system is packed in a black box and only the input in terms of the real existing flaws in the component is considered and compared to the output in terms of the indications of the human inspector or of the automated system. The second - the European tradition – relies on a standardized description of physical/technical parameters of the NDE system which are preconditions for successful system performance. The third approach - the modular conception - is a marriage of both: The signal chain is cut into main modules. Each module is assessed in a most appropriate individual way e.g. via modeling calculations. The single results are joint together according to the reliability theory of systems where the reliability of the total system is composed of the reliability of the subsystems. Separating criteria for the system were proposed through a reliability formula developed during a series of European-American workshops on NDE reliability. A further essential parameter especially for demining systems are the repeatability and reproducibility. Their affect on the reliability and its scatter will be investigated. Examples for the ROC/POD approach in terms of the investigation of the reliability of ultrasonic manual testing and for first attempts for the reliability investigation of demining data will be presented. It will be strongly recommended to apply the ROC/POD and Modular Conceptions to the assessment and optimization of mine seeking systems. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/397/397.htm N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-2015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Wilrich, Peter-Th. A1 - Konchina, V. A1 - Markucic, D. A1 - Piscenec, Z. T1 - Proposals for Performance Demonstration and Modular Validation T2 - NDRF Summer Conference 2002 CY - Rosersberg, Sweden DA - 2002-08-28 PY - 2002 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1(?) EP - 10(?) AN - OPUS4-2017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Konchina, V. N. T1 - ПОДГОТОВКА И СЕРТИФИКАЦИЯ ПЕРСОНАЛА ПО НЕРАЗРУШАЮЩЕМУ КОНТРОЛЮ ОБЪЕКТОВ ЖЕЛЕЗНОДОРОЖНОГО ТРАНСПОРТА В ПГУПС N2 - Безопасность движения на железнодорожном транспорте обеспечивается широким применением современных компьютеризированных средств неразрушающего контроля (НК), которые требуют квалифицированного персонала для их обслуживания и расшифровки результатов контроля. Персонал, занятый НК элементов инфраструктуры и подвижного состава при их эксплуатации и техническом обслуживании (ремонте), а также в предприятиях, изготавливающих продукцию железнодорожного назначения, включает: инженерные кадры - работников, в функциональные обязанности которых входит организация или организация и выполнение НК (в том числе и разработка технологий и технологической документации по НК), а также расшифровка результатов НК, и рабочих – дефектоскопистов или операторов дефектоскопных тележек. Система подготовки персонала по НК, действующая на железнодорожном транспорте и реализуемая в ПГУПС кафедрой «Методы и приборы неразрушающего контроля», созданной А.К.Гурвичем в 1977 году, включает профессиональнее обучение, высшее профессиональное образование по направлению «Приборостроение», дополнительное профессиональное образование - повышение квалификации и переподготовку (в том числе, для персонала железнодорожных специальностей). В соответствии с требованиями действующих нормативных документов подтверждение квалификации производится путем сертификации. Уполномоченный орган по сертификации персонала по НК, создан и функционирует в ПГУПС в рамках системы добровольной сертификации персонала по НК (Руководящий орган – Регистр систем сертификации персонала), деятельность которой в области железнодорожного транспорта управляется и контролируется Технической комиссией по железнодорожному транспорту, включающей представителей Росжелдора, ОАО «РЖД», промышленных предприятий - работодателей, Уполномоченных органов и Экзаменационных центров системы сертификации. В докладе представлены и проанализированы результаты деятельности кафедры МПНК и Квалификационного центра по НК в ПГУПС. T2 - XXIII Petersburg Scientific and Technical Conference "Ultrasonic flaw detection of metals and advanced materials" UZDM-2019 CY - St. Petersburg, Repino, Russia DA - 28.05.2019 KW - Transportwesen KW - Personalzertifizierung KW - ZfP-Ausbildung KW - Lehrplan Universität PY - 2019 AN - OPUS4-48300 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -