TY - GEN A1 - Dengiz, Nizametin A1 - Fuchs, Martin A1 - Gaal, Mate A1 - Gautzsch, Tobias A1 - Herzog, Thomas A1 - Kornely, Mike A1 - Littner, Linus A1 - Marhenke, Torben A1 - Schmid, Simon A1 - Sommerhuber, Ryan A1 - Steinhausen, Ralf A1 - Szewieczek, Artur A1 - Wachter, Luis A1 - Waschkies, Thomas A1 - Wunderl, Stefan T1 - Leitfaden zur Durchführung von luftgekoppelter Ultraschallprüfung N2 - Die Anwendungsgebiete der luftgekoppelten Ultraschallprüfung (ACUT) können sehr vielfältig sein und weichen häufig stark von den Einsatzgebieten der klassischen Ultraschallprüfung ab. Vielmehr ist die ACUT eine eigenständige Methode, welche sich häufig eher mit Röntgen oder Thermografie überschneidet oder Prüfungen ermöglicht, die bis heute gar nicht verlässlich zerstörungsfrei durchgeführt werden können. Obwohl die luftgekoppelte Ultraschallprüfung mittlerweile keine neue Technologie ist, bleibt sie im Vergleich zu anderen Verfahren der ZfP ein Randgebiet unter den Methoden. Dies kommt nicht zuletzt dadurch zustande, dass es an Normen, Fachbüchern und Ausbildungsmöglichkeiten für interessierte Prüfer und Prüfaufsichten mangelt. Dies schafft für viele Anwendungsgebiete eine Einstiegshürde, welche die häufigere Anwendung verhindert. Aus diesen Gründen haben sich Experten aus Forschungseinrichtungen und aus der Industrie entschieden, einen Unterausschuss „Luftgekoppelte Ultraschallprüfung“ (ACUT) als Teil des Fachausschusses Ultraschallprüfung der DGZfP einzurichten und dort diese Themen zu bearbeiten. Es wurde beschlossen, einen Leitfaden zu erarbeiten, der interessierten Anwendern den Einstieg in ACUT erleichtert und eine Hilfestellung bei der Spezifikation und Umsetzung von solchen Prüfungen gibt. Das vorliegende Dokument ist das Ergebnis dieser Zusammenarbeit. KW - Luftgekoppelter Ultraschall KW - Ultraschallprüfung KW - Leitfaden PY - 2025 UR - https://publikationen.dgzfp.de/shop/leitfaden-zur-durchfuehrung-von-luftgekoppelter-ultraschallpruefung/ SN - 978-3-947971-45-9 VL - Richtlinie ACUT SP - 1 EP - 28 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin ET - Ausgabe Januar 2025 AN - OPUS4-62491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dengiz, Nizamettin A1 - Fuchs, Martin A1 - Gaal, Mate A1 - Gautzsch, Tobias A1 - Herzog, Thomas A1 - Kornely, Mike A1 - Littner, Linus A1 - Marhenke, Torben A1 - Schmid, Simon A1 - Sommerhuber, Ryan A1 - Steinhausen, Ralf A1 - Szewieczek, Artur A1 - Wachter, Luis A1 - Waschkies, Thomas A1 - Wunderl, Stefan ED - Gaal, Mate T1 - Guideline to performing air-coupled ultrasonic testing N2 - The areas of application of air-coupled ultrasonic testing (ACUT) can be very diverse and often differ greatly from the areas of application of classic ultrasonic testing. In fact, ACUT is an independent method that often overlaps with X-ray or thermography or enables tests that cannot yet be reliably performed non-destructively. Although air-coupled ultrasonic testing is not a new technology, it remains a rarely used method compared to other NDT methods. This is not least due to the lack of standards, specialised books and training opportunities for interested inspectors and inspection supervisors. This creates a barrier to entry for many areas of application, which prevents more frequent use. For these reasons, experts from research institutes and industry have decided to set up an "Air-Coupled Ultrasonic Testing" (ACUT) sub-committee as part of the DGZfP's Ultrasonic Testing Technical Committee to work on these topics. It was decided to draw up a guideline to make it easier for interested users to get started with ACUT and to provide assistance with the specification and implementation of such tests. This document is the result of this co-operation. KW - air-coupled ultrasound KW - guideline KW - non-destructive testing PY - 2025 SP - 1 EP - 28 CY - Berlin AN - OPUS4-64847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Schmid, Thomas T1 - Möglichkeiten zur Sonderprobenanalytik - Gemeinsame Aktivitäten mit dem Salsa-Applikationslabor der Humboldt Universität zu Berlin N2 - Troubleshooting Samples Analytics: Impurities in products: unexpected & unwanted occurrence, unknown identity, analytical method unclear, often various analytical methods, necessary, short response time important (< 1 d), benefits: allocation of its source within hours safes cost • Investigations planned, coordinated and documented by TSA team • Variety of analytical methods available T2 - 3. Analytic-City-Forum Berlin Adlershof CY - Berlin, Germany DA - 08.10.2015 KW - Troubleshooting Samples Analytics KW - TSA KW - Sonderprobenanalytik KW - Salsa KW - Applikationslabor PY - 2015 AN - OPUS4-36139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmid, Thomas A1 - Schäfer, N. A1 - Levcenko, S. A1 - Rissom, T. A1 - Abou-Ras, D. T1 - Orientation-distribution mapping of polycrystalline materials by Raman microspectroscopy N2 - Raman microspectroscopy provides the means to obtain local orientations on polycrystalline materials at the submicrometer level. The present work demonstrates how orientation-distribution maps composed of Raman intensity distributions can be acquired on large areas of several hundreds of square micrometers. A polycrystalline CuInSe2 thin film was used as a model system. The orientation distributions are evidenced by corresponding measurements using electron backscatter diffraction (EBSD) on the same identical specimen positions. The quantitative, local orientation information obtained by means of EBSD was used to calculate the theoretical Raman intensities for specific grain orientations, which agree well with the experimental values. The presented approach establishes new horizons for Raman microspectroscopy as a tool for quantitative, microstructural analysis at submicrometer resolution. PY - 2015 DO - https://doi.org/10.1038/srep18410 SN - 2045-2322 VL - 5 SP - Article 18410, 1 EP - 7 PB - Nature Publishing Group CY - London AN - OPUS4-35224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dariz, P. A1 - Schmid, Thomas T1 - Spurenbestandteile in frühmittelalterlichem Ägyptisch Blau als Informationsträger N2 - Naturwissenschaftliche Belege für die Verwendung von Ägyptisch Blau, dem klassischen Blaupigment der römischen Antike, an frühmittelalterlichen Wandmalereien in Mittel- und Südeuropa sind bisher nur vereinzelt greifbar. Das hier diskutierte monochrom blaue Fragment einer Freskomalerei auf Tünche gehört zum zweiten Kirchenbau von St. Peter ob Gratsch (Südtirol, Norditalien); zumindest der Putzmörtel ist gemäß Radiocarbondatierung im 5. oder 6. Jahrhundert n. Chr. zu verorten. Das flächendeckende Abrastern der Probenoberfläche mittels Ramanmikrospektroskopie vermochte neben dem farbgebenden Cuprorivait (und Pflanzenschwarz aus der Untermalung) 26 begleitende Mineralien bis in den Spurenbereich nachzuweisen. Diese erstaunliche Vielfalt ist nur durch mikrospektroskopische Bildgebung in hoher Ortsauflösung zugänglich, ein solch vertiefter Einblick in die Mineralogie der zugrundeliegenden Rohstoffe als auch Umwandlungsreaktionen während Herstellung, Applikation und Alterung des künstlichen Blaupigmentes also an die Weiterentwicklung der analytischen Verfahren gebunden. Insbesondere die natürlichen Verunreinigungen des Quarzsandes liefern Indizien auf die Produktionsstätte: die beiden Klinopyroxene Augit und Aegirin deuten beispielsweise auf magmatischen Aktivitäten ausgesetzte Ablagerungen (oder auf vulkanische Aktivität bereits im Liefergebiet). Zusammen mit Diopsid und Feldspaten, einschließlich des seltenen Celsian, sind sie der Literatur zufolge charakteristischer Bestandteil von vom Fluss Volturno in den Golf von Gaeta transportierten carbonathaltigen Sedimenten. Im Verein mit der archäologischen Evidenz für die Erzeugung von Ägyptisch Blau in Cumae und Liternum und den übereinstimmenden Ausführungen der beiden römischen Fachschriftsteller Vitruv und Plinius der Ältere spricht dies für ein Fabrikat aus dem Golf von Pozzuoli. Als Kupferquelle wurde angesichts des Nachweises von Chalkosin (und Chalkopyrit) vermutlich ein sulfidisches Kupfererz nach Rosten zu Kupferoxid eingesetzt, als schmelzpunktsenkendes Flussmittel wohl ein gemischt-alkalisches, das heißt eine Mischung von Natrium- und Kaliumsalzen in Form von Pflanzenasche. Zum Teil mit Cuprorivait verwachsene, nicht gänzlich umgesetzte Quarzkristalle bei nur geringsten Spuren von Silikatglas lassen auf eine überwiegende Festkörperreaktion (Festphasensintern) schließen; das Aufschmelzen der Rohstoffe zu Glas dürfte bei der Pigmentsynthese eher eine untergeordnete Rolle gespielt haben. KW - Ägyptisch Blau KW - Ramanmikrospektroskopie KW - Spektroskopische Bildgebung KW - Cuprorivait KW - Amorpher Kohlenstoff PY - 2021 VL - 34 SP - 109 EP - 122 PB - Wernersche Verlagsgeselltschaft CY - Worms AN - OPUS4-53758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dariz, P. A1 - Schmid, Thomas T1 - Trace compounds in Early Medieval Egyptian blue carry information on provenance, manufacture, application, and ageing N2 - Only a few scientific evidences for the use of Egyptian blue in Early Medieval wall paintings in Central and Southern Europe have been reported so far. The monochrome blue fragment discussed here belongs to the second church building of St. Peter above Gratsch (South Tyrol, Northern Italy, fifth/ sixth century A.D.). Beyond cuprorivaite and carbon black (underpainting), 26 accessory minerals down to trace levels were detected by means of Raman microspectroscopy, providing unprecedented insights into the raw materials blend and conversion reactions during preparation, application, and ageing of the pigment. In conjunction with archaeological evidences for the manufacture of Egyptian blue in Cumae and Liternum and the concordant statements of the antique Roman writers Vitruvius and Pliny the Elder, natural impurities of the quartz sand speak for a pigment produced at the northern Phlegrean Fields (Campania, Southern Italy). Chalcocite (and chalcopyrite) suggest the use of a sulphidic copper ore, and water-insoluble salts a mixed-alkaline flux in the form of plant ash. Not fully reacted quartz crystals partly intergrown with cuprorivaite and only minimal traces of silicate glass portend solid-state reactions predominating the chemical reactions during synthesis, while the melting of the raw materials into glass most likely played a negligible role. KW - Egyptian blue KW - Raman microspectroscopy KW - Spectoscopic imaging KW - Cuprorivaite KW - Amorphous carbon PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537591 DO - https://doi.org/10.1038/s41598-021-90759-6 VL - 11 SP - 1 EP - 12 PB - Nature Portfolio AN - OPUS4-53759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmid, Thomas A1 - Kraft, Ronja A1 - Dariz, P. T1 - Shedding light onto the spectra of lime - Part 2: Raman spectra of Ca and Mg carbonates and the role of d-block element luminescence N2 - We previously described the observation of a characteristic narrowband red luminescence emission of burnt lime (CaO), whose reason was unknown so far. This study presents Raman spectra of Mg5 CO3)4(OH)2∙4H2O, Mg5(CO3)4(OH)2, MgCO3, CaMgCO3 and CaCO3 (in limestone powder) as well as luminescence spectra of their calcination products. Comparison of the latter revealed MgO:Cr3+ as the source of the red lime luminescence in all studied samples, containing magnesium oxide as major component, minor component or trace. Spectral characteristics and theoretical background of the luminescence emission of d-block elements integrated in crystal lattices are discussed with the aim of sharpening the awareness for this effect in the Raman community and promoting its application in materials analysis. The latter is demonstrated by the Raman microspectroscopic imaging of the distributions of both Raman-active and Raman-inactive phases in clinker remnants in a 19th-century meso Portland cement mortar sample, which contain relatively high amounts of free lime detected in the form of both luminescing CaO and Raman-scattering Ca(OH)2, owing to exposure of the surface of the thin section to humid air. A combination of light and Raman spectroscopy revealed a calcium–magnesium–iron sulphide phase, indicating sulphurous raw materials and/or solid fuels employed in the calcination process, which in contrast to previously described morphologies of sulphides in cement clinker form extensive greenish black layers on free lime crystals. KW - Calcium carbonates KW - Raman spectroscopy KW - Luminescence KW - Magnesium carbonates KW - Meso Portland cement PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537611 DO - https://doi.org/10.1002/jrs.6174 SN - 0377-0486 VL - 52 IS - 8 SP - 1462 EP - 1472 PB - Wiley Analytical Science AN - OPUS4-53761 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmid, Thomas A1 - Hidde, Julia A1 - Grünier, Sophie A1 - Jungnickel, Robert A1 - Dariz, P. A1 - Riedel, Jens A1 - Neuhaus, B. T1 - Ageing effects in mountig media of microscope slide samples from natural history collections: A case study with Canada balsam and Permount™ N2 - Microscope slide collections represent extremely valuable depositories of research material in a natural history, forensic, veterinary, and medical context. Unfortunately, most mounting media of these slides deteriorate over time, with the reason for this not yet understood at all. In this study, Raman spectroscopy, ultraviolet–visible (UV–Vis) spectroscopy, and different types of light microscopy were used to investigate the ageing behaviour of naturally aged slides from museum collections and the experimentally aged media of Canada balsam and Permount™, representing a natural and a synthetic resin, respectively, with both being based on mixtures of various terpenes. Whereas Canada balsam clearly revealed chemical ageing processes, visible as increasing colouration, Permount™ showed physical deterioration recognisable by the increasing number of cracks, which even often impacted a mounted specimen. Noticeable changes to the chemical and physical properties of these mounting media take decades in the case of Canada balsam but just a few years in the case of Permount™. Our results question whether or not Canada balsam should really be regarded as a mounting medium that lasts for centuries, if its increasing degree of polymerisation can lead to a mount which is no longer restorable. KW - Deterioration KW - Microscope slides KW - Mounting media KW - Raman spectroscopy KW - UV–Vis spectroscopy PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537632 DO - https://doi.org/10.3390/polym13132112 VL - 13 IS - 13 SP - 1 EP - 27 PB - MDPI CY - Basel AN - OPUS4-53763 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dariz, P. A1 - Wortmann, U. G. A1 - Vogl, Jochen A1 - Schmid, Thomas T1 - Beautiful Pietàs in South Tyrol (Northern Italy): local or imported works of art? N2 - The study, dedicated to Beautiful Pietàs conserved in South Tyrol (Northern Italy), aims to establish, for the first time, a connection between Austroalpine raw materials and the high-fired gypsum mortars constituting the Gothic figure groups in question. The origin and chronology of this stylistically and qualitatively differing ensemble have been subject of art historical debate for nearly a century. The discourse is dominated by three main hypotheses: itinerary of an Austrian artist versus itinerary of the work of art created in an artist’s workshop in Austria versus itinerary of the stylistic vocabulary via graphical or three-dimensional models. The comparison of the δ34S values and the 87Sr/86Sr ratios of the gypsum mortars and Austroalpine sulphate deposits (in a compilation of own reference samples and literature data) points to the exploitation of sediments in the Salzkammergut and possibly also in the evaporite district of the Eastern Calcareous Alps, thus evidencing the import of the sculptures and not the activities of local South Tyrolean or itinerant artists. Two geochronological units are distinguishable: The Pietà in the Church St. Martin in Göflan can be assigned to Upper Permian raw material, whereas the metrologically consistent sculptures in the Church of Our Lady of the Benedictine Abbey Marienberg and in the Chapel St. Ann in Mölten correlate with deposits of the Early Triassic (or the Lower-Middle Triassic transition). The medieval gypsum mortars also differ in their mineralogical characteristics, i.e. in their geologically related minor components, as in the first case, characterised by a significant proportion of primary anhydrite, natural carbonate impurities mainly consist of calcite (partly converted to lime-lump-like aggregates), whereas in the second group dolomite (or rather its hydration products after pyrometamorphic decomposition) predominates, accompanied by celestine, quartz and potassium feldspar. The Pietà in the Cathedral Maria Himmelfahrt in Bozen turned out to be made of Breitenbrunn calcareous sandstone (Leitha Mountains, Burgenland, Austria), which is why the sample is not considered in the geochemical analysis. KW - High-fired gypsum mortar KW - Sulphur isotope KW - Strontium isotope KW - Polarised light microscopy KW - Raman microspectroscopy PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545610 DO - https://doi.org/10.1186/s40494-022-00678-6 SN - 2050-7445 VL - 10 IS - 1 SP - 1 EP - 17 PB - Springer Nature AN - OPUS4-54561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmid, Thomas T1 - Raman microspectroscopy elucidates Early Medieval art technology: high-fired gypsum mortar and Egyptian blue from the church St. Peter above Gratsch (South Tyrol, Northern Italy) N2 - Raman microspectroscopy enables imaging of the distributions of mineral phases as well as physical properties of materials, such as crystal orientations and crystallinities, with down to sub-micrometre resolution. In a combination with other spectroscopic and microscopic techniques, this approach was applied to the analysis and elucidation of ancient production technologies of stucco fragments made of high-fired gypsum mortar and Egyptian blue pigment discovered on a monochrome wall painting fragment originating from the Early Medieval (5th/6th century AD) construction phase of the church St. Peter above Gratsch in South Tyrol (Northern Italy). T2 - Analytica Conference 2022 CY - Munich, Germany DA - 21.06.2022 KW - Raman microspectroscopy KW - Gypsum KW - Pigments PY - 2022 AN - OPUS4-55896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -