TY - GEN A1 - Wolf, Martin A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, Thomas ED - Herold, H. T1 - Determination of critical strain rate for solidification cracking by numerical simulation PY - 2008 SN - 978-3-540-78627-6 IS - Part I SP - 77 EP - 92 PB - Springer CY - Berlin AN - OPUS4-24488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schaupp, Thomas A1 - Rhode, Michael A1 - Kannengießer, Thomas ED - Lippold, J. ED - Böllinghaus, Thomas ED - Richardson, I. T1 - Influence of welding parameters on diffusible hydrogen content in high-strength steel welds using modified spray arc process N2 - In order to satisfy the growing requirements towards lightweight design and resource efficiency in modern steel constructions, e.g., mobile cranes and bridges, high-strength steels with typical yield strength ≥ 690 MPa are coming into use to an increasing extent. However, these steels require special treatment in welding. The susceptibility for degradation of the mechanical properties in the presence of hydrogen increases significantly with increasing yield strength. In case of missing knowledge about how and the amount of hydrogen that is uptaken during welding, hydrogen-assisted cracking (HAC) can be a negative consequence. Moreover, modern weld technology like the modified spray arc process enables welding of narrower weld seams. In this context, a reduced number of weld beads, volume, and total heat input are technical and economical benefits. This work presents the influence of welding parameters on the diffusible hydrogen content in both (1) single-pass and (2) multi-layer welds. Different hydrogen concentrations were detected by varied contact tube distance, wire feed speed, arc length, and varied arc type (transitional arc and modified spray arc). The results show that all welding parameters have significant influence on the diffusible hydrogen concentration in the single-pass welds. By increasing the number of weld beads in case of multi-layer welding, the hydrogen concentration has been reduced. Whereby, differences in hydrogen concentrations between both arc types are present. KW - Hydrogen KW - MAG welding KW - High-strength steels KW - Process parameters PY - 2018 DO - https://doi.org/10.1007/s40194-017-0535-9 SN - 0043-2288 SN - 1878-6669 VL - 62 IS - 1 SP - 9 EP - 18 PB - Springer CY - Berlin Heidelberg AN - OPUS4-43864 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Neuhaus, M. T1 - Effects of the load history on the residual stress distribution in welded components KW - Loading KW - Residual stresses KW - Stress distribution KW - Influencing factors KW - Practical investigations KW - Measurement KW - Cooling KW - Hardness KW - Mechanical properties KW - Temperature distribution KW - Heat affected zone KW - Weld zone KW - Yield strength KW - Strength KW - Parent material KW - Restraint PY - 2006 SN - 0043-2288 SN - 1878-6669 VL - 50 IS - 7/8 SP - 11 EP - 17 PB - Springer CY - Oxford AN - OPUS4-12516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas A1 - Jochum, C. A1 - Stiebe-Springer, I. T1 - Effect of filler material selection on stress strain build up and stress corrosion cracking resistance of welded supermartensitic stainless steel pipes T2 - Corrosion 2002 CY - Denver, CO, USA DA - 2002-04-07 KW - Supermartensitic stainless steel KW - Filler material KW - Orbital TIG welding KW - Duplex stainless steel KW - Hydrogen assisted cracking KW - Stress strain distribution KW - Shrinkage restraint KW - Formation water PY - 2002 SP - Paper 02061, 1 EP - 20 PB - NACE International CY - Houston, Tex. AN - OPUS4-1794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Mc Inerney, T. A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Cross, C.E. ED - Cerjak, H. T1 - The influence of local weld deformation on hot cracking susceptibility T2 - 6th International Seminar on the Numerical Analysis of Weldability CY - Seggauberg, Austria DA - 2001-10-01 PY - 2002 SN - 1-902653-56-4 N1 - Serientitel: Books of IOM3 – Series title: Books of IOM3 IS - 784 SP - 803 EP - 818 PB - Maney CY - London AN - OPUS4-1793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas A1 - Schobbert, Helmut T1 - Neue werkstofftechnische Erkenntnisse und Ergebnisse aus der BAM PY - 2003 SN - 0935-0292 VL - 18.2004 SP - 80 EP - 90 PB - Verl. für Schweißen u. Verwandte Verfahren DVS-Verl. CY - Düsseldorf AN - OPUS4-2656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, D.M. A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas T1 - Risssicherheit von Schweißnähten an Pipelines der Offshore-Industrie aus supermartensitischem Stahl T2 - Schweißen und Schneiden 2005 CY - Essen, Deutschland DA - 2005-09-12 KW - Supermartensit KW - Risssicherheit KW - Geschlossene Prüfkette PY - 2005 SN - 3-87155-695-5 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 237 SP - 85 EP - 91 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-11083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas A1 - Holler, K. A1 - Kannengießer, Thomas A1 - Schobbert, H. T1 - Nd: YAG laser plasma powder hybrid welding of austenitic stainless steels N2 - As an approach towards more rough industrial laser welding applications, the Nd:YAG laser welding process has been coupled to the plasma powder welding process for the first time. Process stabilities have been achieved by such hybrid welding which are even better than those known from previous coupling of the laser process with gas metal arc welding (GMAW), for instance. The present contribution focuses on the technology and potentials of the novel laser hybrid welding technique and addresses the realisation and the perspectives for practical applications. The experimental results demonstrate that the new process coupling enables welding of austenitic stainless steels in the thickness range between 3 mm and 8 mm at various weld geometries and joint configurations and at welding speeds exceeding 2 m/min. In addition it has been proven that the laser plasma powder arc welding (LPPAW) technique can also be applied to out-of-position conditions. Continuous advancement of the welding equipment ensures a high gap bridging ability and levelling of misalignment due to higher powder feeding rates. The recent development of a new plasma powder torch even provides a higher efficiency of powder feeding and guarantees smoth weld surfaces. Up to the present, the investigations demonstrated that the novel laser plasma powder hybrid welding technique offers all perspectives for application in pipe fabrication, ship building and offshore as well as transportation industry. T2 - Seminar in Mechanical and Metallurgical Approaches to New Joining Process CY - Awaji Island, Japan DA - 20.07.2004 KW - Nd:YAG KW - Laser plasma KW - Powder KW - Hybrid KW - Welding KW - Austenitic stainless steels PY - 2004 SP - 140 EP - 145 CY - Japan AN - OPUS4-39261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Florian, Wolfgang A1 - Herold, H. T1 - Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components N2 - Düring the past decades, weldability studies have predominantly been concentrated on the material and the welding process. In order to achieve a closer insight into the structural effects, component weldability tests have been performed by online monitoring of the reaction forces and moments. As a particular item, the effects of different strengths of the base and filier material on the reaction force and stress build up transverse to the welding direction have been studied at a specific structural restraint. As a most relevant result for practical welding it is demonstrated that the final reaction force and also the reaction stress level in the multilayer butt welds decreases with overmatch of the weld metal. PY - 2000 IS - IX-1971-00 SP - 1 EP - 18 PB - International Institute of Welding CY - Paris AN - OPUS4-11842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neuhaus, Mathias A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Herold, H. A1 - Hoffmeister, H. T1 - Beurteilung der Kaltrisssicherheit von Schweißverbindungen in realen Konstruktionen mit der Finite-Elemente-Methode T2 - Große Schweißtechnische Tagung "Schweißen und Schneiden" 2004 CY - Magdeburg, Deutschland DA - 2004-09-22 PY - 2004 SN - 3-87155-689-0 SN - 0418-9639 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 232 SP - 195 EP - 200 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-4635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böllinghaus, Thomas A1 - Kannengießer, Thomas ED - Uwe Reisgen, T1 - Prüfen Sie noch oder bewerten Sie schon - Entwicklungen in der Untersuchung geschweißter Bauteile / Are You Still Testing or Already Evaluating - Developments in the investigation of Welded Components PY - 2007 SN - 978-3-8322-6644-8 SN - 0943-9358 SP - 41 EP - 57 PB - Shaker CY - Aachen AN - OPUS4-16270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -